dmesg - ODROID-XU-stream
Booting Linux on physical CPU 0
Initializing cgroup subsys cpu
Linux version 3.4.104 (root@THEserver) (gcc version 4.7.2 (crosstool-NG 1.17.0) ) #1 SMP PREEMPT Tue Nov 18 11:43:20 UTC 2014
CPU: ARMv7 Processor [412fc0f3] revision 3 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: ODROIDXU
S5P/CMA: Reserved 0x08000000@0xb7e00000 for 'ion'
S5P/CMA: Reserved 0x00100000@0xb7d00000 for 'drm_mfc_sh'
S5P/CMA: Reserved 0x00c00000@0xb7100000 for 'drm_g2d_wfd'
S5P/CMA: Reserved 0x00400000@0xac000000 for 'drm_sectbl'
S5P/CMA: Reserved 0x00100000@0xac400000 for 'drm_mfc_fw'
S5P/CMA: Reserved 0x01000000@0xac500000 for 'drm_mfc_input'
S5P/CMA: Reserved 0x03b00000@0xad500000 for 'drm_mfc_output'
S5P/CMA: Reserved 0x03000000@0xb1000000 for 'drm_fimd_video'
Memory policy: ECC disabled, Data cache writealloc
CPU EXYNOS5410 (id 0xe5410023)
exynos5_init_clocks: initializing clocks
S3C24XX Clocks, Copyright 2004 Simtec Electronics
exynos5410_setup_clocks: registering clocks
exynos5410_setup_clocks: xtal is 24000000
EXYNOS5: EAGLECLK=900000000, KFCCLK=600000000, CDREX=800000000
On node 0 totalpages: 523776
free_area_init_node: node 0, pgdat c0a8a640, node_mem_map c0c6b000
Normal zone: 1116 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 125860 pages, LIFO batch:31
HighMem zone: 3488 pages used for memmap
HighMem zone: 393312 pages, LIFO batch:31
PERCPU: Embedded 8 pages/cpu @c1e78000 s12288 r8192 d12288 u32768
pcpu-alloc: s12288 r8192 d12288 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519172
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 2046MB = 2046MB total
Memory: 1785796k/1785796k available, 309308k reserved, 1311744K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc09b4000 (9904 kB)
.init : 0xc09b4000 - 0xc09f4000 ( 256 kB)
.data : 0xc09f4000 - 0xc0a9f6a0 ( 686 kB)
.bss : 0xc0a9f6c4 - 0xc0c6a1d0 (1835 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:693
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
Console: colour dummy device 80x30
console [tty1] enabled
Calibrating delay loop... 1785.85 BogoMIPS (lpj=4464640)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys perf_event
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
Setting up static identity map for 0x4071c348 - 0x4071c3a0
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: Booted secondary processor
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: Booted secondary processor
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Brought up 4 CPUs
SMP: Total of 4 processors activated (7143.42 BogoMIPS).
devtmpfs: initialized
gpio: GPZ has no PM function
NET: Registered protocol family 16
Last reset was reset (RST_STAT=0x100)
odroidxu_clkout_init [496] : clkout_clk = 24000000
exynos5_odroidxu_display_init : LCD or HDMI or DVI Monitor!
Virtual FB Size from Boot Parameter : X(1280), y(720)
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
CCI is not supportedS3C Power Management, Copyright 2004 Simtec Electronics
Failed to get (null) clock
EXYNOS5410 PMU Initialize
EXYNOS: Initializing architecture
s3c24xx-pwm s3c24xx-pwm.0: tin at 2015151, tdiv at 2015151, tin=divclk, base 0
s3c24xx-pwm s3c24xx-pwm.3: tin at 33250000, tdiv at 33250000, tin=divclk, base 16
Exynos5410 : Lot ID is N63BA[Non Special]
Exynos5410 ASV : Use Fusing Speed Group 5
Exynos5410 ASV : invalid IDS value
EXYNOS5410 ASV : N63BA IDS : 0 HPM : 0
VDD_ARM ASV group is 5
VDD_KFC ASV group is 5
VDD_INT_MIF_L0 ASV group is 5
VDD_MIF ASV group is 5
VDD_G3D ASV group is 5
VDD_INT_MIF_L1 ASV group is 5
VDD_INT_MIF_L2 ASV group is 5
VDD_INT_MIF_L3 ASV group is 5
Exynos Power mode List
NAME CPU MIF INT CPU0 CPU1 CPU2 CPU3
init 0 0 0 1 1 1 1
quad 1600000 800000 400000 1 1 1 1
quad_io 1800000 800000 400000 1 1 0 0
quad_mem 1800000 800000 400000 1 1 0 0
exynos_interface_init: failed to create sysfs interface
bio: create slab at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-gpio i2c-gpio.2: using pins 77 (SDA) and 78 (SCL)
i2c-gpio i2c-gpio.10: using pins 323 (SDA) and 311 (SCL)
s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
s3c-i2c s3c2440-i2c.1: slave address 0x10
s3c-i2c s3c2440-i2c.1: bus frequency set to 377 KHz
s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
s3c-i2c s3c2440-i2c.0: slave address 0x10
s3c-i2c s3c2440-i2c.0: bus frequency set to 377 KHz
s3c-i2c s3c2440-i2c.2: no platform data
s3c-i2c: probe of s3c2440-i2c.2 failed with error -22
max77802 4-0009: device found
max77802_irq_init+
max77802_irq_init: gpio_irq=0
max77802_irq_init-
vdd_emmc range: Failed to create debugfs directory
exynos5-i2c exynos5-hs-i2c.0: i2c-4: Exynos5 HS-I2C adapter
Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Version 1.0.25.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
nfc: nfc_init: NFC Core ver 0.1
NET: Registered protocol family 39
Switching to clocksource mct-frc
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 2060K
big.LITTLE switcher initializing
big.LITTLE switcher initialized
s3c-adc samsung-adc-v5: operating without regulator "vdd" .
s3c-adc samsung-adc-v5: attached adc driver
highmem bounce pool size: 64 pages
NFS: Registering the id_resolver key type
NTFS driver 2.1.30 [Flags: R/W DEBUG].
fuse init (API version 7.18)
msgmni has been set to 929
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
exynos4210-uart.0: ttySAC0 at MMIO 0x12c00000 (irq = 83) is a S3C6400/10
exynos4210-uart.1: ttySAC1 at MMIO 0x12c10000 (irq = 84) is a S3C6400/10
exynos4210-uart.2: ttySAC2 at MMIO 0x12c20000 (irq = 85) is a S3C6400/10
console [ttySAC2] enabled
exynos4210-uart.3: ttySAC3 at MMIO 0x12c30000 (irq = 86) is a S3C6400/10
ion_device_add_heap: can not insert multiple heaps with id 1
ion_device_add_heap: can not insert multiple heaps with id 0
PVR_K: PVRSRVDriverProbe(pDevice=c0a3f818)
PVR_K: SysInitialise: start
PVR_K: enable_gpu_power off fail with pm_runtime_suspended
PVR_K: SysInitialise: end
brd: module loaded
loop: module loaded
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver ipheth
usbcore: registered new interface driver cdc_ncm
exynos-drd exynos-dwc3.0: Core ID Number: 0x5533
exynos-drd exynos-dwc3.0: Release Number: 0x200a
exynos-drd exynos-dwc3.0: IRQ: ID: 1
exynos-drd exynos-dwc3.0: IRQ: VBUS: inactive
exynos-drd exynos-dwc3.1: Core ID Number: 0x5533
exynos-drd exynos-dwc3.1: Release Number: 0x200a
exynos-drd exynos-dwc3.1: IRQ: VBUS: inactive
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
s5p-ehci s5p-ehci: S5P EHCI Host Controller
s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
s5p-ehci s5p-ehci: irq 103, io mem 0x12110000
s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
exynos-ohci exynos-ohci: Already power on PHY
exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
exynos-ohci exynos-ohci: irq 103, io mem 0x12120000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
exynos-drd exynos-dwc3.0: Core ID Number: 0x5533
exynos-drd exynos-dwc3.0: Release Number: 0x200a
exynos-xhci exynos-xhci.0: EXYNOS xHCI Host Controller
exynos-xhci exynos-xhci.0: new USB bus registered, assigned bus number 3
exynos-xhci exynos-xhci.0: irq 104, io mem 0x12000000
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
exynos-xhci exynos-xhci.0: EXYNOS xHCI Host Controller
exynos-xhci exynos-xhci.0: new USB bus registered, assigned bus number 4
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
exynos-drd exynos-dwc3.1: Core ID Number: 0x5533
exynos-drd exynos-dwc3.1: Release Number: 0x200a
exynos-xhci exynos-xhci.1: EXYNOS xHCI Host Controller
exynos-xhci exynos-xhci.1: new USB bus registered, assigned bus number 5
exynos-xhci exynos-xhci.1: irq 232, io mem 0x12400000
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
exynos-xhci exynos-xhci.1: EXYNOS xHCI Host Controller
exynos-xhci exynos-xhci.1: new USB bus registered, assigned bus number 6
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for generic
usb 1-2: new high-speed USB device number 2 using s5p-ehci
usb3503 4-0008: switched to HUB mode
usb3503 4-0008: usb3503_probe: probed on hub mode
exynos-ss-udc exynos-ss-udc.0: regs df8b0000, irq 104
exynos-ss-udc exynos-ss-udc.1: regs df8b2000, irq 232
mousedev: PS/2 mouse device common for all mice
odroid_keypad_init
input: odroid-keypad as /devices/virtual/input/input0
odroid_keypad_open
--------------------------------------------------------
odroid-keypad driver initialized!! Ver 1.0
--------------------------------------------------------
platform_driver_register 0
usbcore: registered new interface driver xpad
odroid-ts 0-0048: I2C write error: (-6) reg: 0x4 len: 0
input: odroidxu-ts as /devices/platform/s3c2440-i2c.0/i2c-0/0-0048/input/input1
odroidxu: Dummy touchscreen driver!
i2c-core: driver [odroid-ts] using legacy suspend method
i2c-core: driver [odroid-ts] using legacy resume method
max77802_rtc_probe
max77802-rtc max77802-rtc: rtc init
max77802_rtc_set_time: 112/0/1 0:0:0(0)
max77802_rtc_set_time: task=swapper/0[1]
max77802-rtc max77802-rtc: max77802_rtc_enable_wtsr: enable WTSR
usb 1-3: new high-speed USB device number 3 using s5p-ehci
max77802_rtc_read_time: 112/0/1 0:0:0(0)
max77802_rtc_read_alarm: 100/0/1 0:0:0(0)
max77802_rtc_read_time: 112/0/1 0:0:0(0)
max77802-rtc max77802-rtc: rtc core: registered max77802-rtc as rtc0
max77802_irq_unmask: group=2, cur=0xfd
i2c /dev entries driver
lirc_dev: IR Remote Control driver registered, major 251
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR SANYO protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR LIRC bridge handler initialized
gspca_main: v2.14.0 registered
exynos-mdev.0: Media0[0xde1cf000] was registered successfully
exynos-mdev.1: Media1[0xde1cf400] was registered successfully
exynos-mdev.2: Media2[0xde1cf800] was registered successfully
s5p-mipi-csis.0
: s5pcsis_probe : csis0 probe success
s5p-mipi-csis.1
: s5pcsis_probe : csis1 probe success
s5p-mipi-csis.2
: s5pcsis_probe : csis2 probe success
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 3 ports detected
[INFO]flite_probe:2214: FIMC-LITE0 probe success
[INFO]flite_probe:2214: FIMC-LITE1 probe success
[INFO]flite_probe:2214: FIMC-LITE2 probe success
[INFO]gsc_probe:1559: gsc-0 registered successfully
[INFO]gsc_probe:1559: gsc-1 registered successfully
[INFO]gsc_probe:1559: gsc-2 registered successfully
[INFO]gsc_probe:1559: gsc-3 registered successfully
exynos5-scaler exynos5-scaler.0: ++sc_probe
exynos5-scaler exynos5-scaler.0: scaler registered successfully
Initialize JPEG driver
s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video12
s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video11
Exynos Graphics 2D driver, (c) 2011 Samsung Electronics
[fimg2d_probe] base address: 0x10850000
[fimg2d_probe] irq: 123
[fimg2d_clk_setup] aclk_acp(266000000) pclk_acp(133000000)
[fimg2d_clk_setup] gate clk: fimg2d
[fimg2d_probe] enable runtime pm
[fimg2d_probe] register sysmmu page fault handler
EXYNOS MFC V4L2 Driver, (c) 2010 Samsung Electronics
s5p-mfc s5p-mfc-v6: s5p_mfc_probe()
s5p-mfc s5p-mfc-v6: decoder registered as /dev/video6
s5p-mfc s5p-mfc-v6: encoder registered as /dev/video7
s5p_mfc_probe--
i2c i2c-2: attached exynos hdcp into i2c adapter successfully
i2c-core: driver [exynos_hdcp] using legacy suspend method
i2c-core: driver [exynos_hdcp] using legacy resume method
Samsung HDMI output driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
s5p-hdmi exynos5-hdmi: hdmi ip version = 2
s5p-hdmi exynos5-hdmi: probe sucessful
Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
s5p-mixer s5p-mixer: probe start
s5p-mixer s5p-mixer: mixer ip version = 2
s5p-mixer s5p-mixer: resources acquired
s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi'
s5p-mixer s5p-mixer: registered layer mxr0_graph0 as /dev/video16
s5p-mixer s5p-mixer: registered layer mxr0_graph1 as /dev/video17
s5p-mixer s5p-mixer: registered layer mxr1_graph2 as /dev/video18
s5p-mixer s5p-mixer: registered layer mxr1_graph3 as /dev/video19
s5p-mixer s5p-mixer: mixer0 create links
s5p-mixer s5p-mixer: mixer1 create links
s5p-mixer s5p-mixer: mixer links are created successfully
s5p-mixer s5p-mixer: probe successful
S5P CEC for Exynos4 Driver, (c) 2009 Samsung Electronics
s5p-tvout-cec s5p-tvout-cec: probe successful
exynos-rot exynos-rot: ++rot_probe
exynos-rot exynos-rot: rotator registered successfully
Initialize JPEG Hx driver
exynos5-jpeg-hx exynos5-jpeg-hx: JPEG driver is registered to /dev/video14
exynos5-jpeg-hx exynos5-jpeg-hx: JPEG driver is registered to /dev/video13
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
samsung-fake-battery samsung-fake-battery: samsung_fake_bat_probe
Exynos: Kernel Thermal management registered
s3c2410_wdt: S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq disabled
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
usbcore: registered new interface driver btusb
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Synopsys Designware Multimedia Card Interface Driver
dw_mmc dw_mmc.0: Using internal DMA controller.
dw_mmc dw_mmc.0: vmmc regulator found
dw_mmc dw_mmc.0: vqmmc regulator found
dw_mmc dw_mmc.0: Version ID is 241a
dw_mmc dw_mmc.0: DW MMC controller at irq 107, 64 bit host data width, 128 deep fifo
dw_mmc dw_mmc.2: Using internal DMA controller.
dw_mmc dw_mmc.2: vmmc regulator found
dw_mmc dw_mmc.2: vqmmc regulator found
mmc_host mmc0: Bus speed (slot 0) = 20000000Hz (slot req 400000Hz, actual 400000HZ div = 25)
dw_mmc dw_mmc.2: Version ID is 241a
dw_mmc dw_mmc.2: DW MMC controller at irq 109, 64 bit host data width, 128 deep fifo
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
odroid_sysfs_init(471) : Sleep Disable Flag SET!!(Wake_lock_init)
exynos5-i2c exynos5-hs-i2c.0: tx timeout
exynos5-i2c exynos5-hs-i2c.0: tx timeout
INA231 4-0040: I2C write error: (-121) reg: 0x0
============= Probe INA231 Fail! : sensor_arm (0xFFFFFF87) =============
INA231: probe of 4-0040 failed with error -121
exynos5-i2c exynos5-hs-i2c.0: tx timeout
mmc_host mmc0: Bus speed (slot 0) = 160000000Hz (slot req 160000000Hz, actual 160000000HZ div = 0)
exynos5-i2c exynos5-hs-i2c.0: tx timeout
INA231 4-0041: I2C write error: (-121) reg: 0x0
============= Probe INA231 Fail! : sensor_mem (0xFFFFFF87) =============
INA231: probe of 4-0041 failed with error -121
dw_mmc dw_mmc.0: data CRC error
mmc0: new HS200 MMC card at address 0001
exynos5-i2c exynos5-hs-i2c.0: tx timeout
mmcblk0: mmc0:0001 064G93 58.2 GiB
mmcblk0: p1 p2
exynos5-i2c exynos5-hs-i2c.0: tx timeout
INA231 4-0044: I2C write error: (-121) reg: 0x0
============= Probe INA231 Fail! : sensor_g3d (0xFFFFFF87) =============
INA231: probe of 4-0044 failed with error -121
exynos5-i2c exynos5-hs-i2c.0: tx timeout
exynos5-i2c exynos5-hs-i2c.0: tx timeout
INA231 4-0045: I2C write error: (-121) reg: 0x0
============= Probe INA231 Fail! : sensor_kfc (0xFFFFFF87) =============
mmc_host mmc1: Bus speed (slot 0) = 20000000Hz (slot req 400000Hz, actual 400000HZ div = 25)
INA231: probe of 4-0045 failed with error -121
i2c-core: driver [INA231] using legacy suspend method
i2c-core: driver [INA231] using legacy resume method
odroidxu: ioboard: keyled probe
mmc_host mmc1: Bus speed (slot 0) = 20000000Hz (slot req 300000Hz, actual 294117HZ div = 34)
mmc_host mmc1: Bus speed (slot 0) = 20000000Hz (slot req 200000Hz, actual 200000HZ div = 50)
mmc_host mmc1: Bus speed (slot 0) = 20000000Hz (slot req 156863Hz, actual 156250HZ div = 64)
hot state 0 to 1
ioboard-bh1780 10-0029: I2C write byte error: data=0x8b
=================== ioboard_bh1780_probe FAIL! ===================
i2c-core: driver [ioboard-bh1780] using legacy suspend method
i2c-core: driver [ioboard-bh1780] using legacy resume method
=================== ioboard_bmp180_probe FAIL! ===================
i2c-core: driver [ioboard-bmp180] using legacy suspend method
i2c-core: driver [ioboard-bmp180] using legacy resume method
odroidxu: ioboard: adc probe
wait_until_ready : error!!
ioboard_spi_write_enable : error!!
=================== ioboard_spi_probe FAIL! ===================
ioboard-spi: probe of spi1.0 failed with error -1
usbcore: registered new interface driver snd-usb-audio
soc-audio soc-audio.0: ASoC machine Odroid-max98090 should use snd_soc_register_card()
samsung-i2s samsung-i2s.0: EPLL rate = 400000000
samsung-i2s samsung-i2s.0: SRP rate = 100000000
samsung-i2s samsung-i2s.0: BUS rate = 50000000
max98090 1-0010: MAX98090 REVID=0x43
asoc: HiFi samsung-i2s.0 mapping ok
asoc: HiFi samsung-i2s.0 mapping ok
GACT probability NOT on
Mirror/redirect action on
u32 classifier
Performance counters on
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP: bic registered
TCP: cubic registered
TCP: westwood registered
TCP: htcp registered
NET: Registered protocol family 10
Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
NET: Registered protocol family 33
RxRPC: Registered security type 2 'rxkad'
NET: Registered protocol family 35
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
Registering SWP/SWPB emulation handler
registered taskstats version 1
s5p-mipi-dsim s5p-mipi-dsim.1: DSI Master driver has been completed.
s5p-mipi-dsim s5p-mipi-dsim.1: DSI Master state is stop state
s5p-mipi-dsim s5p-mipi-dsim.1: dsim_lcd_drv->probe is NULL.
s5p-mipi-dsim s5p-mipi-dsim.1: mipi-dsi driver(RGB mode) has been probed.
s3c-fb exynos5-fb.1: failed to find bootloader framebuffer
s3c-fb exynos5-fb.1: couldn't copy bootloader framebuffer into default window; clearing instead
s3c-fb exynos5-fb.1: window 0: fb
vddq_lcd: incomplete constraints, leaving on
uiCount = 1800
PA FB = 0xB6900000, bits per pixel = 32
screen width=1280 height=720 va=0x0xres_virtual = 1280, yres_virtual = 720, xoffset = 0, yoffset = 0
fb_size=7372800
Back frameBuffer[0].VAddr=00384000 PAddr=b6484000 size=3686400
max77802_rtc_read_time: 112/0/1 0:0:3(0)
max77802-rtc max77802-rtc: setting system clock to 2012-01-01 00:00:03 UTC (1325376003)
CPUFREQ of CA7 L0 : 1225000 uV
CPUFREQ of CA7 L1 : 1225000 uV
CPUFREQ of CA7 L2 : 1162500 uV
CPUFREQ of CA7 L3 : 1100000 uV
CPUFREQ of CA7 L4 : 1037500 uV
CPUFREQ of CA7 L5 : 987500 uV
CPUFREQ of CA7 L6 : 950000 uV
CPUFREQ of CA7 L7 : 950000 uV
CPUFREQ of CA7 L8 : 950000 uV
CPUFREQ of CA7 L9 : 950000 uV
CPUFREQ of CA7 L10 : 950000 uV
CPUFREQ of CA7 L11 : 950000 uV
CPUFREQ of CA15 L0 : 1362500 uV
CPUFREQ of CA15 L1 : 1362500 uV
CPUFREQ of CA15 L2 : 1250000 uV
CPUFREQ of CA15 L3 : 1200000 uV
CPUFREQ of CA15 L4 : 1162500 uV
CPUFREQ of CA15 L5 : 1137500 uV
CPUFREQ of CA15 L6 : 1100000 uV
CPUFREQ of CA15 L7 : 1062500 uV
CPUFREQ of CA15 L8 : 1025000 uV
CPUFREQ of CA15 L9 : 1000000 uV
CPUFREQ of CA15 L10 : 962500 uV
CPUFREQ of CA15 L11 : 925000 uV
CPUFREQ of CA15 L12 : 900000 uV
CPUFREQ of CA15 L13 : 900000 uV
CPUFREQ of CA15 L14 : 900000 uV
CPUFREQ of CA15 L15 : 900000 uV
CPUFREQ of CA15 L16 : 900000 uV
CPUFREQ of CA15 L17 : 900000 uV
CPUFREQ of CA15 L18 : 900000 uV
fout_apll[900000000]
S divider change for DFS of MIF block
init_volt[987500], freq[800000]
ALSA device list:
#0: Odroid-max98090
Freeing init memory: 256K
Write protecting the kernel text section c0008000 - c09b4000
rodata_test: attempting to write to read-only section:
write to read-only section trapped, success
systemd-udevd[1299]: starting version 204
EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
init: plymouth-upstart-bridge main process (1350) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1360) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: ureadahead main process (1353) terminated with status 5
init: plymouth-upstart-bridge main process (1364) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
systemd-udevd[1491]: starting version 204
S5P ACE Driver, (c) 2010 Samsung Electronics
ACE: ecb-aes-s5p-ace
ACE: cbc-aes-s5p-ace
ACE: ctr-aes-s5p-ace
ACE: sha1-s5p-ace
ACE: sha256-s5p-ace
ACE driver is initialized
smsc95xx v1.0.4
[smsc95xx_read_mac_addr] Mac address = 36:E6:6A:0E:97:B1
smsc95xx 1-2:1.0: eth0: register 'smsc95xx' at usb-s5p-ehci-2, smsc95xx USB 2.0 Ethernet, 36:e6:6a:0e:97:b1
usbcore: registered new interface driver smsc95xx
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
smsc95xx 1-2:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
eth0: no IPv6 routers present
init: failsafe main process (1743) killed by TERM signal
touch_input_open
touch_input_close
init: plymouth-upstart-bridge main process ended, respawning
touch_input_open
s5p-mipi-dsim s5p-mipi-dsim.1: DSI Master driver has been completed.
s5p-mipi-dsim s5p-mipi-dsim.1: DSI Master state is stop state