dmesg - phoronix-test-results-01
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-30-generic (buildd@lgw01-54) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #34~14.04.1-Ubuntu SMP Fri Oct 2 22:10:15 UTC 2015 (Ubuntu 3.19.0-30.34~14.04.1-generic 3.19.8-ckt6)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000ce000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000037e7ffff] usable
BIOS-e820: [mem 0x0000000037e80000-0x0000000037e93fff] ACPI data
BIOS-e820: [mem 0x0000000037e94000-0x0000000037e94fff] ACPI NVS
BIOS-e820: [mem 0x0000000037e95000-0x000000003fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: FUJITSU SIEMENS AMILO Pa 2510/F37 , BIOS 1.06C 07/12/07
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x37e80 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CDFFF write-protect
CE000-E3FFF uncachable
E4000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FFC0000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
found SMP MP-table at [mem 0x000f83f0-0x000f83ff] mapped at [c00f83f0]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x021fffff]
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x20000000-0x377fffff]
[mem 0x20000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01c2a000, 0x01c2afff] PGTABLE
BRK [0x01c2b000, 0x01c2bfff] PGTABLE
RAMDISK: [mem 0x3596e000-0x36caefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000F83C0 000024 (v02 PTLTD )
ACPI: XSDT 0x37E8DD4E 000054 (v01 FSC PC 06040000 LTP 00000000)
ACPI: FACP 0x37E93A96 0000F4 (v03 ATI Herring 06040000 ATI 000F4240)
ACPI: DSDT 0x37E8DDA2 005CF4 (v01 ECS F37 06040000 MSFT 03000000)
ACPI: FACS 0x37E94FC0 000040
ACPI: FACS 0x37E94FC0 000040
ACPI: SSDT 0x37E93BFE 0001C4 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
ACPI: APIC 0x37E93DC2 000054 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: MCFG 0x37E93E16 00003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: HPET 0x37E93E52 000038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
ACPI: SLIC 0x37E93E8A 000176 (v01 FSC PC 06040000 LTP 00000000)
ACPI: Local APIC address 0xfee00000
2MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x37e7ffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x37e7ffff]
Initmem setup node 0 [mem 0x00001000-0x37e7ffff]
On node 0 totalpages: 228892
DMA zone: 40 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3996 pages, LIFO batch:0
Normal zone: 2190 pages used for memmap
Normal zone: 224254 pages, LIFO batch:31
HighMem zone: 642 pages, LIFO batch:0
Using APIC driver default
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538301 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
PM: Registered nosave memory: [mem 0x000ce000-0x000fffff]
e820: [mem 0x40000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 17 pages/cpu @f71b5000 s39360 r0 d30272 u69632
pcpu-alloc: s39360 r0 d30272 u69632 alloc=17*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 226662
Kernel command line: BOOT_IMAGE=/vmlinuz-3.19.0-30-generic root=/dev/mapper/ubuntu--vg-root ro persistent quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (00037bfe:00037e80)
Initializing Movable for node 0 (00000000:00000000)
Memory: 871984K/915568K available (6950K kernel code, 666K rwdata, 3000K rodata, 932K init, 788K bss, 43584K reserved, 0K cma-reserved, 2568K highmem)
virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1a62000 - 0xc1b4b000 ( 932 kB)
.data : 0xc16c9e50 - 0xc1a60b40 (3675 kB)
.text : 0xc1000000 - 0xc16c9e50 (6951 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:2304 nr_irqs:440 16
CPU 0 irqstacks, hard=f5436000 soft=f5438000
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1795.430 MHz processor
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 3590.86 BogoMIPS (lpj=7181720)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
Freeing SMP alternatives memory: 32K (c1b4b000 - c1b53000)
ftrace: allocating 29322 entries in 58 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 0) ...
....... works.
smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 (fam: 0f, model: 68, stepping: 01)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
CPU 1 irqstacks, hard=f555a000 soft=f555c000
x86: Booting SMP configuration:
.... node #0, CPUs: #1
Initializing CPU#1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
process: System has AMD C1E enabled
process: Switch to broadcast mode on CPU1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (7181.85 BogoMIPS)
process: Switch to broadcast mode on CPU0
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x37e94000-0x37e94fff] (4096 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 18:57:50, date: 10/09/15
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [1000, fffff]
TOM: 0000000040000000 aka 1024M
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [c8000000, cfffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [40000000, c7ffffff]
bus: [bus 00-ff] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x40000000-0xefffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xf0000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-0c] at [mem 0xe0000000-0xe0cfffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe0cfffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-0c] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000ce000-0x000cffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d1fff]
pci_bus 0000:00: root bus resource [mem 0x000d2000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d5fff]
pci_bus 0000:00: root bus resource [mem 0x000d6000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000d9fff]
pci_bus 0000:00: root bus resource [mem 0x000da000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000ddfff]
pci_bus 0000:00: root bus resource [mem 0x000de000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e1fff]
pci_bus 0000:00: root bus resource [mem 0x000e2000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x40000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci 0000:00:00.0: [1002:7910] type 00 class 0x060000
pci 0000:00:01.0: [1002:7912] type 01 class 0x060400
pci 0000:00:04.0: [1002:7914] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1002:7916] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [1002:7917] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
pci 0000:00:12.0: reg 0x10: [io 0x8440-0x8447]
pci 0000:00:12.0: reg 0x14: [io 0x8434-0x8437]
pci 0000:00:12.0: reg 0x18: [io 0x8438-0x843f]
pci 0000:00:12.0: reg 0x1c: [io 0x8430-0x8433]
pci 0000:00:12.0: reg 0x20: [io 0x8400-0x840f]
pci 0000:00:12.0: reg 0x24: [mem 0xc0004000-0xc00043ff]
pci 0000:00:12.0: set SATA to AHCI mode
pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xc0005000-0xc0005fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xc0006000-0xc0006fff]
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
pci 0000:00:13.3: reg 0x10: [mem 0xc0007000-0xc0007fff]
pci 0000:00:13.3: System wakeup disabled by ACPI
pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
pci 0000:00:13.4: reg 0x10: [mem 0xc0008000-0xc0008fff]
pci 0000:00:13.4: System wakeup disabled by ACPI
pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
pci 0000:00:13.5: reg 0x10: [mem 0xc0004400-0xc00044ff]
pci 0000:00:13.5: supports D1 D2
pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.5: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.0: reg 0x10: [io 0x8410-0x841f]
pci 0000:00:14.1: [1002:438c] type 00 class 0x010182
pci 0000:00:14.1: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: reg 0x14: [io 0x03f4-0x03f7]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0x8420-0x842f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xc0000000-0xc0003fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:01:05.0: [1002:791f] type 00 class 0x030000
pci 0000:01:05.0: reg 0x10: [mem 0xc8000000-0xcfffffff 64bit pref]
pci 0000:01:05.0: reg 0x18: [mem 0xc0100000-0xc010ffff 64bit]
pci 0000:01:05.0: reg 0x20: [io 0x9000-0x90ff]
pci 0000:01:05.0: reg 0x24: [mem 0xc0200000-0xc02fffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:01.0: bridge window [mem 0xc0100000-0xc02fffff]
pci 0000:00:01.0: bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:02:00.0: [168c:001c] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xc0300000-0xc030ffff 64bit]
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:04.0: PCI bridge to [bus 02-04]
pci 0000:00:04.0: bridge window [mem 0xc0300000-0xc03fffff]
acpiphp: Slot [1-1] registered
pci 0000:00:06.0: PCI bridge to [bus 05-07]
pci 0000:00:06.0: bridge window [io 0x0000-0x0fff]
pci 0000:00:06.0: bridge window [mem 0x00000000-0x000fffff]
pci 0000:08:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [io 0xa000-0xa0ff]
pci 0000:08:00.0: reg 0x18: [mem 0xc0400000-0xc0400fff 64bit]
pci 0000:08:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:07.0: PCI bridge to [bus 08-0a]
pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
pci 0000:00:07.0: bridge window [mem 0xc0400000-0xc04fffff]
pci 0000:00:14.4: PCI bridge to [bus 0b-0d] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000ce000-0x000cffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000da000-0x000dbfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000de000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e1fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e2000-0x000e3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x40000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:05.0
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:05.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x37e80000-0x37ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
system 00:04: [io 0x040b] has been reserved
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cd1] has been reserved
system 00:04: [io 0x0cd2-0x0cd3] has been reserved
system 00:04: [io 0x0cd4-0x0cd5] has been reserved
system 00:04: [io 0x0cd6-0x0cd7] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x8000-0x805f] could not be reserved
system 00:04: [io 0x8100-0x81ff window] has been reserved
system 00:04: [io 0x8200-0x82ff window] has been reserved
system 00:04: [io 0x0f40-0x0f47] has been reserved
system 00:04: [io 0x087f] has been reserved
system 00:04: [io 0x0378-0x037f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:08:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:05: [mem 0xfff00000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:01.0: bridge window [mem 0xc0100000-0xc02fffff]
pci 0000:00:01.0: bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02-04]
pci 0000:00:04.0: bridge window [mem 0xc0300000-0xc03fffff]
pci 0000:00:06.0: PCI bridge to [bus 05-07]
pci 0000:08:00.0: BAR 6: assigned [mem 0xc0420000-0xc043ffff pref]
pci 0000:00:07.0: PCI bridge to [bus 08-0a]
pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
pci 0000:00:07.0: bridge window [mem 0xc0400000-0xc04fffff]
pci 0000:00:14.4: PCI bridge to [bus 0b-0d]
pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 5 [mem 0x000ce000-0x000cffff]
pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d1fff]
pci_bus 0000:00: resource 7 [mem 0x000d2000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d5fff]
pci_bus 0000:00: resource 9 [mem 0x000d6000-0x000d7fff]
pci_bus 0000:00: resource 10 [mem 0x000d8000-0x000d9fff]
pci_bus 0000:00: resource 11 [mem 0x000da000-0x000dbfff]
pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000ddfff]
pci_bus 0000:00: resource 13 [mem 0x000de000-0x000dffff]
pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e1fff]
pci_bus 0000:00: resource 15 [mem 0x000e2000-0x000e3fff]
pci_bus 0000:00: resource 16 [mem 0x40000000-0xdfffffff]
pci_bus 0000:00: resource 17 [mem 0xf0000000-0xffffffff]
pci_bus 0000:00: resource 18 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 19 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc02fffff]
pci_bus 0000:01: resource 2 [mem 0xc8000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xc0300000-0xc03fffff]
pci_bus 0000:08: resource 0 [io 0xa000-0xafff]
pci_bus 0000:08: resource 1 [mem 0xc0400000-0xc04fffff]
pci_bus 0000:0b: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0b: resource 5 [mem 0x000ce000-0x000cffff]
pci_bus 0000:0b: resource 6 [mem 0x000d0000-0x000d1fff]
pci_bus 0000:0b: resource 7 [mem 0x000d2000-0x000d3fff]
pci_bus 0000:0b: resource 8 [mem 0x000d4000-0x000d5fff]
pci_bus 0000:0b: resource 9 [mem 0x000d6000-0x000d7fff]
pci_bus 0000:0b: resource 10 [mem 0x000d8000-0x000d9fff]
pci_bus 0000:0b: resource 11 [mem 0x000da000-0x000dbfff]
pci_bus 0000:0b: resource 12 [mem 0x000dc000-0x000ddfff]
pci_bus 0000:0b: resource 13 [mem 0x000de000-0x000dffff]
pci_bus 0000:0b: resource 14 [mem 0x000e0000-0x000e1fff]
pci_bus 0000:0b: resource 15 [mem 0x000e2000-0x000e3fff]
pci_bus 0000:0b: resource 16 [mem 0x40000000-0xdfffffff]
pci_bus 0000:0b: resource 17 [mem 0xf0000000-0xffffffff]
pci_bus 0000:0b: resource 18 [io 0x0000-0x0cf7]
pci_bus 0000:0b: resource 19 [io 0x0d00-0xffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:05.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19716K (f596e000 - f6caf000)
microcode: AMD CPU family 0xf not supported
Scanning for low memory corruption every 60 seconds
futex hash table entries: 512 (order: 3, 32768 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1444417071.924:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: cannot reserve video memory at 0xa0000
efifb: framebuffer at 0xa0000, mapped to 0xc00a0000, using 64k, total 64k
efifb: mode is 640x480x1, linelength=80, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 80x30
fb0: EFI VGA frame buffer device
ACPI: AC Adapter [AC0] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: processor limited to max C-state 1
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (64 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
ACPI: Battery Slot [BAT0] (battery present)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:13.5: EHCI Host Controller
ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:13.5: debug port 1
ehci-pci 0000:00:13.5: irq 19, io mem 0xc0004400
ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-30-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:13.5
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:13.0: irq 16, io mem 0xc0005000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 3.19.0-30-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:13.1: irq 17, io mem 0xc0006000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.19.0-30-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci-pci 0000:00:13.3: OHCI PCI host controller
ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:13.3: irq 17, io mem 0xc0007000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.19.0-30-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci-pci 0000:00:13.4: OHCI PCI host controller
ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.4: irq 18, io mem 0xc0008000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.19.0-30-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.4
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: c15755b0f57ec88eb3f1346a5c680288452fedf7'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 3:54:999
rtc_cmos 00:01: hash matches
pnp0: hash matches
rtc_cmos 00:01: setting system clock to 2015-10-09 18:57:53 UTC (1444417073)
powernow_k8: fid 0xa (1800 MHz), vid 0x12
powernow_k8: fid 0x8 (1600 MHz), vid 0x13
powernow_k8: fid 0x0 (800 MHz), vid 0x1a
powernow_k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 (2 cpu cores) (version 2.20.00)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
isapnp: No Plug & Play device found
Freeing unused kernel memory: 932K (c1a62000 - c1b4b000)
Write protecting the kernel text: 6952k
Write protecting the kernel read-only data: 3008k
NX-protecting the kernel data: 5336k
systemd-udevd[96]: starting version 204
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:08:00.0 eth0: RTL8101e at 0xf844e000, 00:03:0d:73:54:75, XID 14000000 IRQ 27
ahci 0000:00:12.0: version 3.0
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004100 irq 22
ata2: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004180 irq 22
ata3: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004200 irq 22
ata4: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004280 irq 22
scsi host4: pata_atiixp
scsi host5: pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T40N, JW02, max UDMA/33
ata5.00: configured for UDMA/33
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: softreset failed (device not ready)
ata1: applying PMP SRST workaround and retrying
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: FUJITSU MHW2160BH, 0000001C, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2160B 001C PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T40N JW02 PQ: 0 ANSI: 5
sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
random: lvm urandom read with 55 bits of entropy available
input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input12
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
Adding 917500k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:917500k FS
systemd-udevd[303]: starting version 204
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI Warning: \_SB_.PCI0.AGP_.VGA_.LCD_._BQC: Return type mismatch - found Reference, expected Integer (20141107/nspredef-290)
acpi device:23: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:21/LNXVIDEO:00/input/input13
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
MCE: In-kernel MCE decoding enabled.
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[drm] Initialized drm 1.1.0 20060810
kvm: Nested Virtualization enabled
cfg80211: Calling CRDA to update world regulatory domain
ath5k 0000:02:00.0: registered as 'phy0'
[drm] radeon kernel modesetting enabled.
checking generic (a0000 10000) vs hw (c8000000 8000000)
fb: switching to radeondrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RS690 0x1002:0x791F 0x1734:0x110A).
[drm] register mmio base: 0xC0100000
[drm] register mmio size: 65536
ATOM BIOS: ATI
radeon 0000:01:05.0: VRAM: 128M 0x0000000038000000 - 0x000000003FFFFFFF (128M used)
radeon 0000:01:05.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 445048 kiB
[TTM] Zone highmem: Available graphics memory: 446332 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 128M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: 1 quad pipes, 1 z pipes initialized.
[drm] PCIE GART of 512M enabled (table at 0x0000000034A00000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000040000000 and cpu addr 0xf3b0d000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:05.0: radeon: MSI limited to 32-bit
radeon 0000:01:05.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] Loading RS690/RS740 Microcode
ath: EEPROM regdomain: 0x30
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: AM
ath: Regpair used: 0x30
[drm] radeon: ring at 0x0000000040001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] LVDS-1
[drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c
[drm] Encoders:
[drm] LCD1: INTERNAL_LVTM1
[drm] Connector 2:
[drm] SVIDEO-1
[drm] Encoders:
[drm] TV1: INTERNAL_KLDSCP_DAC1
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
cfg80211: Calling CRDA to update world regulatory domain
init: avahi-cups-reload main process (582) terminated with status 1
audit: type=1400 audit(1444409887.633:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=452 comm="apparmor_parser"
audit: type=1400 audit(1444409887.633:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=452 comm="apparmor_parser"
audit: type=1400 audit(1444409887.633:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=452 comm="apparmor_parser"
audit: type=1400 audit(1444409887.633:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=449 comm="apparmor_parser"
audit: type=1400 audit(1444409887.633:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=449 comm="apparmor_parser"
audit: type=1400 audit(1444409887.633:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=449 comm="apparmor_parser"
audit: type=1400 audit(1444409887.633:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=576 comm="apparmor_parser"
audit: type=1400 audit(1444409887.633:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=576 comm="apparmor_parser"
audit: type=1400 audit(1444409887.633:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=576 comm="apparmor_parser"
audit: type=1400 audit(1444409887.637:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=449 comm="apparmor_parser"
sound hdaudioC0D1: ALC883: SKU not ready 0x598301f0
Bluetooth: Core ver 2.20
sound hdaudioC0D1: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D1: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
sound hdaudioC0D1: mono: mono_out=0x0
sound hdaudioC0D1: dig-out=0x1e/0x0
sound hdaudioC0D1: inputs:
sound hdaudioC0D1: Mic=0x18
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[drm] fb mappable at 0xC8040000
[drm] vram apper at 0xC8000000
[drm] size 4096000
[drm] fb depth is 24
[drm] pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:05.0: registered panic notifier
[drm] Initialized radeon 2.40.0 20080528 for 0000:01:05.0 on minor 0
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: Calling CRDA for country: AM
cfg80211: Regulatory domain changed to country: AM
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm), (0 s)
init: failsafe main process (608) killed by TERM signal
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:08:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
audit_printk_skb: 33 callbacks suppressed
audit: type=1400 audit(1444409895.177:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=791 comm="apparmor_parser"
wlan0: authenticate with e8:40:f2:5c:38:85
wlan0: send auth to e8:40:f2:5c:38:85 (try 1/3)
wlan0: authenticated
wlan0: associate with e8:40:f2:5c:38:85 (try 1/3)
wlan0: RX AssocResp from e8:40:f2:5c:38:85 (capab=0x411 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
audit: type=1400 audit(1444409896.689:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=908 comm="apparmor_parser"
audit: type=1400 audit(1444409896.689:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=908 comm="apparmor_parser"
audit: type=1400 audit(1444409896.689:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=908 comm="apparmor_parser"
audit: type=1400 audit(1444409896.689:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=908 comm="apparmor_parser"
audit: type=1400 audit(1444409896.689:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=908 comm="apparmor_parser"
audit: type=1400 audit(1444409896.689:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=908 comm="apparmor_parser"
audit: type=1400 audit(1444409896.777:30): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=907 comm="apparmor_parser"
audit: type=1400 audit(1444409896.777:31): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=907 comm="apparmor_parser"
audit: type=1400 audit(1444409896.777:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=907 comm="apparmor_parser"
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
CE: hpet increased min_delta_ns to 20115 nsec
ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
perf interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5032 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
ath5k: ath5k_hw_get_isr: ISR: 0x00000001 IMR: 0x00000000
ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000