dmesg - thjkl

Return To thjkl System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-30-generic (buildd@lgw01-13) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #33-Ubuntu SMP Mon Sep 21 20:58:04 UTC 2015 (Ubuntu 3.19.0-30.33-generic 3.19.8-ckt6)
Command line: BOOT_IMAGE=lenovotest/casper/vmlinuz root=/dev/nfs boot=casper netboot=nfs nfsroot=192.168.10.1:/tftpboot/lenovotest initrd=lenovotest/casper/initrd.gz quiet splash --
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009735ffff] usable
BIOS-e820: [mem 0x0000000097360000-0x0000000097b5ffff] reserved
BIOS-e820: [mem 0x0000000097b60000-0x000000009cabefff] usable
BIOS-e820: [mem 0x000000009cabf000-0x000000009cebefff] reserved
BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 20384/Lenovo B50-70, BIOS 9DCN21WW(V2.02) 06/27/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-E7FFF write-protect
  E8000-EFFFF write-combining
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask 7C00000000 write-back
  1 base 009D000000 mask 7FFF000000 uncachable
  2 base 009E000000 mask 7FFE000000 uncachable
  3 base 00A0000000 mask 7FE0000000 uncachable
  4 base 00C0000000 mask 7FC0000000 uncachable
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 2512MB, range: 16MB, type UC
reg 2, base: 2528MB, range: 32MB, type UC
reg 3, base: 2560MB, range: 512MB, type UC
reg 4, base: 3GB, range: 1GB, type UC
total RAM covered: 14800M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2512MB, range: 16MB, type UC
reg 3, base: 2528MB, range: 32MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 8GB, type WB
e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
 [mem 0x25f400000-0x25f5fffff] page 2M
BRK [0x01fe8000, 0x01fe8fff] PGTABLE
init_memory_mapping: [mem 0x240000000-0x25f3fffff]
 [mem 0x240000000-0x25f3fffff] page 2M
init_memory_mapping: [mem 0x220000000-0x23fffffff]
 [mem 0x220000000-0x23fffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x9735ffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0x7fffffff] page 1G
 [mem 0x80000000-0x971fffff] page 2M
 [mem 0x97200000-0x9735ffff] page 4k
init_memory_mapping: [mem 0x97b60000-0x9cabefff]
 [mem 0x97b60000-0x97bfffff] page 4k
 [mem 0x97c00000-0x9c9fffff] page 2M
 [mem 0x9ca00000-0x9cabefff] page 4k
BRK [0x01fe9000, 0x01fe9fff] PGTABLE
BRK [0x01fea000, 0x01feafff] PGTABLE
init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
 [mem 0x9cfff000-0x9cffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x21fffffff]
 [mem 0x100000000-0x21fffffff] page 1G
RAMDISK: [mem 0x7e256000-0x7fffffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
ACPI: XSDT 0x000000009CFFE210 0000B4 (v01 LENOVO CB-01    00000001      01000013)
ACPI: FACP 0x000000009CFF8000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: DSDT 0x000000009CFE7000 00DA18 (v02 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: FACS 0x000000009CFBA000 000040
ACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: FPDT 0x000000009CFFB000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: MSDM 0x000000009CFFA000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: ASF! 0x000000009CFF9000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: HPET 0x000000009CFF7000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: APIC 0x000000009CFF6000 00008C (v03 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: MCFG 0x000000009CFF5000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: WDAT 0x000000009CFE6000 000224 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: SSDT 0x000000009CFE5000 000700 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: BOOT 0x000000009CFE3000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: LPIT 0x000000009CFE2000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: ASPT 0x000000009CFE0000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: DBGP 0x000000009CFDF000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: SSDT 0x000000009CFDA000 000539 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: SSDT 0x000000009CFD9000 000AD8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: SSDT 0x000000009CFD5000 003537 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: SSDT 0x000000009CFD1000 0020C1 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
NODE_DATA(0) allocated [mem 0x25f5f8000-0x25f5fcfff]
 [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256c00000-ffff88025ebfffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x25f5fffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009cfff]
  node   0: [mem 0x00100000-0x9735ffff]
  node   0: [mem 0x97b60000-0x9cabefff]
  node   0: [mem 0x9cfff000-0x9cffffff]
  node   0: [mem 0x100000000-0x25f5fffff]
Initmem setup node 0 [mem 0x00001000-0x25f5fffff]
On node 0 totalpages: 2078812
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  DMA32 zone: 9931 pages used for memmap
  DMA32 zone: 635584 pages, LIFO batch:31
  Normal zone: 22488 pages used for memmap
  Normal zone: 1439232 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x97360000-0x97b5ffff]
PM: Registered nosave memory: [mem 0x9cabf000-0x9cebefff]
PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88025f200000 s87104 r8192 d31680 u262144
pcpu-alloc: s87104 r8192 d31680 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2046308
Policy zone: Normal
Kernel command line: BOOT_IMAGE=lenovotest/casper/vmlinuz root=/dev/nfs boot=casper netboot=nfs nfsroot=192.168.10.1:/tftpboot/lenovotest initrd=lenovotest/casper/initrd.gz quiet splash --
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8070088K/8315248K available (8004K kernel code, 1234K rwdata, 3764K rodata, 1408K init, 1300K bss, 245160K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:760 16
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.584 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.16 BogoMIPS (lpj=9578336)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff81e96000 - ffffffff81e9e000)
ftrace: allocating 30120 entries in 118 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (fam: 06, model: 45, stepping: 01)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19156.67 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 15:10:41, date: 10/06/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802555C9C00 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880255513000 0005AA (v01 PmRef  ApIst    00003000 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88025551BC00 000119 (v01 PmRef  ApCst    00003000 INTL 20121220)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PC05] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xc2000000-0xc23fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0x7000-0x703f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xc2710000-0xc2713fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xc2700000-0xc270ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xc2718000-0xc271801f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xc2714000-0xc2717fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:9c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xc271c000-0xc271c3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0x7088-0x708f]
pci 0000:00:1f.2: reg 0x14: [io  0x7094-0x7097]
pci 0000:00:1f.2: reg 0x18: [io  0x7080-0x7087]
pci 0000:00:1f.2: reg 0x1c: [io  0x7090-0x7093]
pci 0000:00:1f.2: reg 0x20: [io  0x7060-0x707f]
pci 0000:00:1f.2: reg 0x24: [mem 0xc271b000-0xc271b7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xc2719000-0xc27190ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x7040-0x705f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:5229] type 00 class 0xff0000
pci 0000:02:00.0: reg 0x10: [mem 0xc1000000-0xc1000fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 02-07]
pci 0000:00:1c.1:   bridge window [io  0x6000-0x6fff]
pci 0000:00:1c.1:   bridge window [mem 0xc1000000-0xc1ffffff]
pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [io  0x5000-0x50ff]
pci 0000:08:00.0: reg 0x18: [mem 0xc2604000-0xc2604fff 64bit]
pci 0000:08:00.0: reg 0x20: [mem 0xc2600000-0xc2603fff 64bit]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.2:   bridge window [mem 0xc2600000-0xc26fffff]
pci 0000:09:00.0: [10ec:b723] type 00 class 0x028000
pci 0000:09:00.0: reg 0x10: [io  0x4000-0x40ff]
pci 0000:09:00.0: reg 0x18: [mem 0xc2500000-0xc2503fff 64bit]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.3:   bridge window [mem 0xc2500000-0xc25fffff]
pci 0000:0a:00.0: [1002:666f] type 00 class 0x038000
pci 0000:0a:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:0a:00.0: reg 0x18: [mem 0xc2400000-0xc243ffff 64bit]
pci 0000:0a:00.0: reg 0x20: [io  0x3000-0x30ff]
pci 0000:0a:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D1 D2 D3hot
pci 0000:0a:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 0a]
pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.4:   bridge window [mem 0xc2400000-0xc24fffff]
pci 0000:00:1c.4:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x27, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0x97360000-0x97ffffff]
e820: reserve RAM buffer [mem 0x9cabf000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io  0x0680-0x069f] has been reserved
system 00:00: [io  0x0500-0x053f] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0x1800-0x18fe] could not be reserved
system 00:00: [io  0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io  0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs SYN2b39 SYN0700 SYN0002 PNP0f13 (active)
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:05: [mem 0xff000000-0xff000fff] has been reserved
system 00:05: [mem 0xff001000-0xff0010ff] has been reserved
system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0x9fa20000-0x9fa20fff] has been reserved
system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
pci 0000:0a:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.1: PCI bridge to [bus 02-07]
pci 0000:00:1c.1:   bridge window [io  0x6000-0x6fff]
pci 0000:00:1c.1:   bridge window [mem 0xc1000000-0xc1ffffff]
pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.2:   bridge window [mem 0xc2600000-0xc26fffff]
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.3:   bridge window [mem 0xc2500000-0xc25fffff]
pci 0000:0a:00.0: BAR 6: assigned [mem 0xc2440000-0xc245ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 0a]
pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.4:   bridge window [mem 0xc2400000-0xc24fffff]
pci 0000:00:1c.4:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
pci_bus 0000:02: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:02: resource 1 [mem 0xc1000000-0xc1ffffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc0ffffff 64bit pref]
pci_bus 0000:08: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:08: resource 1 [mem 0xc2600000-0xc26fffff]
pci_bus 0000:09: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:09: resource 1 [mem 0xc2500000-0xc25fffff]
pci_bus 0000:0a: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:0a: resource 1 [mem 0xc2400000-0xc24fffff]
pci_bus 0000:0a: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 30376K (ffff88007e256000 - ffff880080000000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x98abf000-0x9cabf000] (64MB) mapped at [ffff880098abf000-ffff88009cabefff]
Simple Boot Flag at 0x44 set to 0x1
RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1444144242.164:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (46 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT1] (battery present)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-30-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-30-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xc271c000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-30-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 091db276173d833742e96ac870591adb9bccda53'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 3:681:183
acpi device:42: hash matches
rtc_cmos 00:01: setting system clock to 2015-10-06 15:10:42 UTC (1444144242)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d36000 - ffffffff81e96000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 176K (ffff8800017d4000 - ffff880001800000)
Freeing unused kernel memory: 332K (ffff880001bad000 - ffff880001c00000)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
random: systemd-udevd urandom read with 7 bits of entropy available
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[drm] Initialized drm 1.1.0 20060810
rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 46
r8169 0000:08:00.0 eth0: RTL8168g/8111g at 0xffffc90000c76000, f8:a9:63:35:aa:90, XID 10900880 IRQ 47
r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xc271b000 port 0xc271b100 irq 48
ata2: SATA max UDMA/133 abar m2048@0xc271b000 port 0xc271b180 irq 48
ata3: DUMMY
ata4: DUMMY
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
[drm] radeon kernel modesetting enabled.
VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
AMD IOMMUv2 driver by Joerg Roedel 
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
radeon 0000:0a:00.0: enabling device (0006 -> 0007)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
fbcon: inteldrmfb (fb0) is primary device
ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.RP05.PEGP.DD02._BCL] (Node ffff8802568f3870), AE_NOT_FOUND (20141107/psparse-536)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3b/LNXVIDEO:00/input/input6
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
[drm] initializing kernel modesetting (HAINAN 0x1002:0x666F 0x17AA:0x3815).
[drm] register mmio base: 0xC2400000
[drm] register mmio size: 262144
vga_switcheroo: enabled
ATPX version 1, functions 0x00000033
ATOM BIOS: Lenovo
radeon 0000:0a:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:0a:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone  kernel: Available graphics memory: 4051206 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading hainan Microcode
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
radeon 0000:0a:00.0: WB enabled
radeon 0000:0a:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880250bdbc00
radeon 0000:0a:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880250bdbc04
radeon 0000:0a:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880250bdbc08
radeon 0000:0a:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880250bdbc0c
radeon 0000:0a:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880250bdbc10
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:0a:00.0: radeon: MSI limited to 32-bit
radeon 0000:0a:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
usb 3-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 0 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] Radeon Display Connectors
radeon 0000:0a:00.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
usb 3-1: New USB device found, idVendor=8087, idProduct=8000
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[drm] fb mappable at 0xA0242000
[drm] vram apper at 0xA0000000
[drm] size 3145728
[drm] fb depth is 24
[drm]    pitch is 4096
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
usb 1-6: new high-speed USB device number 2 using xhci_hcd
usb 1-6: New USB device found, idVendor=5986, idProduct=0652
usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6: Product: Lenovo EasyCamera
usb 1-6: Manufacturer: Generic
usb 1-6: SerialNumber: 200901010001
ata1.00: ATA-8: TOSHIBA MQ01ABD100, AX1P5E, max UDMA/100
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABD1 5E   PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-7: new full-speed USB device number 3 using xhci_hcd
psmouse serio1: synaptics: queried max coordinates: x [..5670], y [..4794]
psmouse serio1: synaptics: queried min coordinates: x [1314..], y [1098..]
tsc: Refined TSC clocksource calibration: 2394.456 MHz
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x2a800, board id: 2848, fw id: 1581875
usb 1-7: No LPM exit latency info found, disabling LPM.
usb 1-7: New USB device found, idVendor=0bda, idProduct=b728
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-7: Product: Bluetooth Radio 
usb 1-7: Manufacturer: Realtek 
usb 1-7: SerialNumber: 00e04c000001
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: MATSHITA DVD-RAM UJ8FBS, F801, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8FBS   F801 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 1-8: new full-speed USB device number 4 using xhci_hcd
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
radeon 0000:0a:00.0: fb1: radeondrmfb frame buffer device
radeon 0000:0a:00.0: registered panic notifier
[drm] Initialized radeon 2.40.0 20080528 for 0000:0a:00.0 on minor 1
usb 1-8: New USB device found, idVendor=138a, idProduct=0011
usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-8: SerialNumber: 489a0ad73aa0
r8169 0000:08:00.0 eth0: link down
r8169 0000:08:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Switched to clocksource tsc
r8169 0000:08:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
squashfs: version 4.0 (2009/01/31) Phillip Lougher
random: nonblocking pool is initialized
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: [/lib/systemd/system/casper.service:10] Failed to parse input specifier, ignoring: force-tty
systemd[1]: Unit rofs.mount is bound to inactive unit dev-loop0.device. Stopping, too.
systemd[1]: Startup finished in 10.451s (kernel) + 410ms (userspace) = 10.862s.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Mounted VMware vmblock fuse mount.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Nameserver information manager...
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Read required files in advance...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Braille Device Support...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Nameserver information manager.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Rebuild Hardware Database.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Various fixups to make systemd work better on Debian...
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Starting udev Wait for Complete Device Initialization...
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started Various fixups to make systemd work better on Debian.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started Journal Service.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd-journald[436]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8
hidraw: raw HID events driver (C) Jiri Kosina
media: Linux media interface: v0.10
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
radeon 0000:0a:00.0: WB enabled
radeon 0000:0a:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880250bdbc00
radeon 0000:0a:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880250bdbc04
radeon 0000:0a:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880250bdbc08
radeon 0000:0a:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880250bdbc0c
radeon 0000:0a:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880250bdbc10
cfg80211: Calling CRDA to update world regulatory domain
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 5 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
Linux video capture interface: v2.00
sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
sound hdaudioC1D0:    mono: mono_out=0x0
sound hdaudioC1D0:    inputs:
sound hdaudioC1D0:      Mic=0x19
sound hdaudioC1D0:      Internal Mic=0x12
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
usbcore: registered new interface driver btusb
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0652)
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: rtlwifi: wireless switch is on
kvm: disabled by bios
kvm: disabled by bios
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
ifquery[713]: segfault at 1 ip 00000000004031c8 sp 00007ffe07512970 error 4 in ifup[400000+d000]
cgroup: new mount options do not match the existing superblock, will be ignored
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
[drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
radeon 0000:0a:00.0: WB enabled
radeon 0000:0a:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880250bdbc00
radeon 0000:0a:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880250bdbc04
radeon 0000:0a:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880250bdbc08
radeon 0000:0a:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880250bdbc0c
radeon 0000:0a:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880250bdbc10
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs

Return To thjkl System Information