dmesg - sfhjkmn
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-15-generic (buildd@komainu) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #15-Ubuntu SMP Thu Apr 16 23:32:37 UTC 2015 (Ubuntu 3.19.0-15.15-generic 3.19.3)
Command line: BOOT_IMAGE=s_img/casper/vmlinuz root=/dev/nfs boot=casper netboot=nfs nfsroot=192.168.10.1:/tftpboot/s_img initrd=s_img/casper/initrd.gz quiet splash --
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000838bffff] usable
BIOS-e820: [mem 0x00000000838c0000-0x0000000084cbffff] reserved
BIOS-e820: [mem 0x0000000084cc0000-0x000000008cabefff] usable
BIOS-e820: [mem 0x000000008cabf000-0x000000008cebefff] reserved
BIOS-e820: [mem 0x000000008cebf000-0x000000008cfbefff] ACPI NVS
BIOS-e820: [mem 0x000000008cfbf000-0x000000008cffefff] ACPI data
BIOS-e820: [mem 0x000000008cfff000-0x000000008cffffff] usable
BIOS-e820: [mem 0x000000008d000000-0x000000008f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000026f5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 20217/VIQY0Y1, BIOS 74CN44WW(V3.05) 09/18/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x26f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 008D000000 mask 7FFF000000 uncachable
2 base 008E000000 mask 7FFE000000 uncachable
3 base 0090000000 mask 7FF0000000 uncachable
4 base 00A0000000 mask 7FE0000000 uncachable
5 base 00C0000000 mask 7FC0000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 2256MB, range: 16MB, type UC
reg 2, base: 2272MB, range: 32MB, type UC
reg 3, base: 2304MB, range: 256MB, type UC
reg 4, base: 2560MB, range: 512MB, type UC
reg 5, base: 3GB, range: 1GB, type UC
total RAM covered: 14544M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 128MB, type WB
reg 2, base: 2176MB, range: 64MB, type WB
reg 3, base: 2240MB, range: 16MB, type WB
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 8GB, type WB
e820: update [mem 0x8d000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x8d000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0x26f400000-0x26f5fffff]
[mem 0x26f400000-0x26f5fffff] page 2M
BRK [0x01fe8000, 0x01fe8fff] PGTABLE
init_memory_mapping: [mem 0x260000000-0x26f3fffff]
[mem 0x260000000-0x26f3fffff] page 2M
init_memory_mapping: [mem 0x240000000-0x25fffffff]
[mem 0x240000000-0x25fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x838bffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x837fffff] page 2M
[mem 0x83800000-0x838bffff] page 4k
init_memory_mapping: [mem 0x84cc0000-0x8cabefff]
[mem 0x84cc0000-0x84dfffff] page 4k
[mem 0x84e00000-0x8c9fffff] page 2M
[mem 0x8ca00000-0x8cabefff] page 4k
BRK [0x01fe9000, 0x01fe9fff] PGTABLE
BRK [0x01fea000, 0x01feafff] PGTABLE
init_memory_mapping: [mem 0x8cfff000-0x8cffffff]
[mem 0x8cfff000-0x8cffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x23fffffff]
[mem 0x100000000-0x23fffffff] page 1G
RAMDISK: [mem 0x7e25f000-0x7fffffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
ACPI: XSDT 0x000000008CFFE210 0000AC (v01 LENOVO CB-01 00000001 01000013)
ACPI: FACP 0x000000008CFF7000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DSDT 0x000000008CFE7000 00C690 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FACS 0x000000008CFBA000 000040
ACPI: SLIC 0x000000008CFFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: UEFI 0x000000008CFFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FPDT 0x000000008CFFA000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: MSDM 0x000000008CFF9000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASF! 0x000000008CFF8000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: HPET 0x000000008CFF6000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: APIC 0x000000008CFF5000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: MCFG 0x000000008CFF4000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000008CFE6000 000838 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: BOOT 0x000000008CFE4000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASPT 0x000000008CFE2000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DBGP 0x000000008CFE1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000008CFD9000 000539 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000008CFD8000 000AD8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000008CFD4000 00326E (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000008CFCF000 003864 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000026f5fffff]
NODE_DATA(0) allocated [mem 0x26f5f8000-0x26f5fcfff]
[ffffea0000000000-ffffea0009bfffff] PMD -> [ffff880266c00000-ffff88026ebfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x26f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x838bffff]
node 0: [mem 0x84cc0000-0x8cabefff]
node 0: [mem 0x8cfff000-0x8cffffff]
node 0: [mem 0x100000000-0x26f5fffff]
Initmem setup node 0 [mem 0x00001000-0x26f5fffff]
On node 0 totalpages: 2075740
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 8859 pages used for memmap
DMA32 zone: 566976 pages, LIFO batch:31
Normal zone: 23512 pages used for memmap
Normal zone: 1504768 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x8da00000-0x8f9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x838c0000-0x84cbffff]
PM: Registered nosave memory: [mem 0x8cabf000-0x8cebefff]
PM: Registered nosave memory: [mem 0x8cebf000-0x8cfbefff]
PM: Registered nosave memory: [mem 0x8cfbf000-0x8cffefff]
PM: Registered nosave memory: [mem 0x8d000000-0x8f9fffff]
PM: Registered nosave memory: [mem 0x8fa00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
e820: [mem 0x8fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88026f200000 s87040 r8192 d31744 u262144
pcpu-alloc: s87040 r8192 d31744 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2043284
Policy zone: Normal
Kernel command line: BOOT_IMAGE=s_img/casper/vmlinuz root=/dev/nfs boot=casper netboot=nfs nfsroot=192.168.10.1:/tftpboot/s_img initrd=s_img/casper/initrd.gz quiet splash --
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8057836K/8302960K available (7993K kernel code, 1232K rwdata, 3752K rodata, 1408K init, 1300K bss, 245124K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2494.341 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.68 BogoMIPS (lpj=9977364)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff81e96000 - ffffffff81e9e000)
ftrace: allocating 30078 entries in 118 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-4200M CPU @ 2.50GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19954.72 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x8cebf000-0x8cfbefff] (1048576 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 10:27:22, date: 10/03/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802655D2400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880265513000 0005AA (v01 PmRef ApIst 00003000 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880265638000 000119 (v01 PmRef ApCst 00003000 INTL 20130117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [NVP3] (on)
ACPI: Power Resource [NVP2] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x8fa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xc2000000-0xc23fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xc2610000-0xc2613fff 64bit]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xc2600000-0xc260ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xc2618000-0xc261800f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xc261d000-0xc261d3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xc2614000-0xc2617fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xc261c000-0xc261c3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
pci 0000:00:1f.2: reg 0x24: [mem 0xc261b000-0xc261b7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xc2619000-0xc26190ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
pci 0000:01:00.0: [10de:0fcd] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xc0ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-06]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc1ffffff]
pci 0000:00:01.0: bridge window [mem 0x90000000-0xafffffff 64bit pref]
pci 0000:07:00.0: [1969:10a1] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [mem 0xc2500000-0xc253ffff 64bit]
pci 0000:07:00.0: reg 0x18: [io 0x3000-0x307f]
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xc2500000-0xc25fffff]
pci 0000:08:00.0: [8086:0888] type 00 class 0x028000
pci 0000:08:00.0: reg 0x10: [mem 0xc2400000-0xc2401fff 64bit]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 08]
pci 0000:00:1c.4: bridge window [mem 0xc2400000-0xc24fffff]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0x838c0000-0x83ffffff]
e820: reserve RAM buffer [mem 0x8cabf000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8d000000-0x8fffffff]
e820: reserve RAM buffer [mem 0x26f600000-0x26fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x0400-0x0453] has been reserved
system 00:00: [io 0x0800-0x08fe] has been reserved
system 00:00: [io 0x0900-0x09fe] has been reserved
system 00:00: [io 0x0a00-0x0afe] has been reserved
system 00:00: [io 0x0b00-0x0bfe] has been reserved
system 00:00: [io 0x1800-0x18fe] could not be reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: [io 0x0d60-0x0d63] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs ETD060b PNP0f13 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0x8fa20000-0x8fa20fff] has been reserved
system 00:06: [mem 0x8fa10000-0x8fa1ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:01:00.0: BAR 6: assigned [mem 0xc1000000-0xc107ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-06]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc1ffffff]
pci 0000:00:01.0: bridge window [mem 0x90000000-0xafffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xc2500000-0xc25fffff]
pci 0000:00:1c.4: PCI bridge to [bus 08]
pci 0000:00:1c.4: bridge window [mem 0xc2400000-0xc24fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x8fa00000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc1ffffff]
pci_bus 0000:01: resource 2 [mem 0x90000000-0xafffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:07: resource 1 [mem 0xc2500000-0xc25fffff]
pci_bus 0000:08: resource 1 [mem 0xc2400000-0xc24fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
pci 0000:07:00.0: set MSI_INTX_DISABLE_BUG flag
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 30340K (ffff88007e25f000 - ffff880080000000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x88abf000-0x8cabf000] (64MB) mapped at [ffff880088abf000-ffff88008cabefff]
Simple Boot Flag at 0x44 set to 0x1
RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x12
microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x12
microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x12
microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x12
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1443868042.916:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (0 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT1] (battery present)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-15-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-15-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xc261d000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-15-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xc261c000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.19.0-15-generic ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 9e64807092f3a6a8f66f3b7ea4cb3767fdfae08a'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 3:235:476
rtc_cmos 00:02: setting system clock to 2015-10-03 10:27:23 UTC (1443868043)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d36000 - ffffffff81e96000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 188K (ffff8800017d1000 - ffff880001800000)
Freeing unused kernel memory: 344K (ffff880001baa000 - ffff880001c00000)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
random: systemd-udevd urandom read with 13 bits of entropy available
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
alx 0000:07:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [28:d2:44:21:5c:30]
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4c/LNXVIDEO:00/input/input7
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x24 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e70d0a2
nouveau [ DEVICE][0000:01:00.0] Chipset: GK107 (NVE7)
nouveau [ DEVICE][0000:01:00.0] Family : NVE0
nouveau [ VBIOS][0000:01:00.0] using image from ACPI
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 80.07.a8.00.0f
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xc261b000 port 0xc261b200 irq 29
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xc261b000 port 0xc261b380 irq 29
nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
nouveau [ VBIOS][0000:01:00.0] running init tables
fbcon: inteldrmfb (fb0) is primary device
usb 1-1: new high-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
nouveau [ PFB][0000:01:00.0] RAM type: GDDR5
nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000002 FAULT at 0x4188ac [ IBUS ]
nouveau [ VOLT][0000:01:00.0] GPU voltage: 600000uv
nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
nouveau [ CLK][0000:01:00.0] 07: core 405 MHz memory 810 MHz
nouveau [ CLK][0000:01:00.0] 0a: core 405-1097 MHz memory 1600 MHz
nouveau [ CLK][0000:01:00.0] 0f: core 405-1097 MHz memory 5400 MHz
nouveau [ CLK][0000:01:00.0] --: core 405 MHz memory 810 MHz
nouveau E[ PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x500c30 [ IBUS ]
vga_switcheroo: enabled
[TTM] Zone kernel: Available graphics memory: 4045074 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau W[ DRM] Pointer to TMDS table invalid
nouveau [ DRM] DCB version 4.0
nouveau W[ DRM] Pointer to flat panel table invalid
nouveau [ DRM] MM: using COPY for buffer copies
[drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 1
usb 3-1: New USB device found, idVendor=8087, idProduct=8008
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
usb 4-1: New USB device found, idVendor=8087, idProduct=8000
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
usb 1-1: New USB device found, idVendor=174f, idProduct=1474
usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-1: Product: Lenovo EasyCamera
usb 1-1: Manufacturer: Lenovo EasyCamera
usb 1-1: SerialNumber: Lenovo EasyCamera
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: MATSHITA DVD-RAM UJ8DB, 8.51, max UDMA/100
ata6.00: ATA-9: ST1000LM014-1EJ164, LVD1, max UDMA/133
ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/100
ata6.00: configured for UDMA/133
usb 1-7: new full-speed USB device number 3 using xhci_hcd
usb 1-7: New USB device found, idVendor=8087, idProduct=07da
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f01)
psmouse serio1: elantech: Synaptics capabilities query result 0x50, 0x15, 0x0e.
tsc: Refined TSC clocksource calibration: 2494.223 MHz
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8DB 8.51 PQ: 0 ANSI: 5
sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg0 type 5
scsi 5:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 LVD1 PQ: 0 ANSI: 5
sd 5:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 5:0:0:0: [sda] 4096-byte physical blocks
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
sd 5:0:0:0: [sda] Attached SCSI disk
ata6.00: exception Emask 0x0 SAct 0x38 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/38:20:40:00:00/00:00:00:00:00/40 tag 4 ncq 28672 in
res 41/84:38:40:00:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
Switched to clocksource tsc
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: configured for UDMA/133
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x1c0 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/80:30:80:00:00/01:00:00:00:00/40 tag 6 ncq 196608 in
res 41/84:80:40:01:00/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: configured for UDMA/133
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x20000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:88:28:03:00/00:00:00:00:00/40 tag 17 ncq 4096 in
res 41/84:08:28:03:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: configured for UDMA/133
ata6: EH complete
ata6: limiting SATA link speed to 3.0 Gbps
ata6.00: exception Emask 0x0 SAct 0x7f0000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:98:80:a7:81/00:00:6f:00:00/40 tag 19 ncq 4096 in
res 41/84:08:80:a7:81/00:00:6f:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
ata6.00: configured for UDMA/133
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x4000003f SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:28:f0:a7:81/00:00:6f:00:00/40 tag 5 ncq 4096 in
res 41/84:08:f0:a7:81/00:00:6f:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
ata6.00: configured for UDMA/133
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0xf38 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:58:00:b0:a1/00:00:72:00:00/40 tag 11 ncq 4096 in
res 41/84:08:00:b0:a1/00:00:72:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
ata6.00: configured for UDMA/133
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x7e01000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:a8:f8:a6:81/00:00:6f:00:00/40 tag 21 ncq 4096 in
res 41/84:08:f8:a6:81/00:00:6f:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
ata6.00: configured for UDMA/133
ata6: EH complete
ata6: limiting SATA link speed to 1.5 Gbps
ata6.00: exception Emask 0x0 SAct 0x4000003f SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:f0:00:b0:81/00:00:6f:00:00/40 tag 30 ncq 4096 in
res 41/84:08:00:b0:81/00:00:6f:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ata6.00: configured for UDMA/133
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x1fc0 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:38:18:08:00/00:00:00:00:00/40 tag 7 ncq 4096 in
res 41/84:08:18:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/133
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0xfe0000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:88:38:48:1f/00:00:00:00:00/40 tag 17 ncq 4096 in
res 41/84:08:38:48:1f/00:00:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/133
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x403fd05e SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:70:10:08:00/00:00:00:00:00/40 tag 14 ncq 4096 in
res 41/84:08:10:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/133
ata6: EH complete
ata6.00: limiting speed to UDMA/100:PIO4
ata6.00: exception Emask 0x0 SAct 0x48007fc0 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:38:00:ab:81/00:00:6f:00:00/40 tag 7 ncq 4096 in
res 41/84:08:00:ab:81/00:00:6f:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/100
ata6: EH complete
random: nonblocking pool is initialized
ata6.00: exception Emask 0x0 SAct 0x71000fbd SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/18:38:20:48:1f/00:00:00:00:00/40 tag 7 ncq 12288 in
res 41/84:18:32:48:1f/00:00:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/100
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0xffe0000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:88:08:0b:00/00:00:00:00:00/40 tag 17 ncq 4096 in
res 41/84:08:08:0b:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/100
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x7d80 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:50:00:ab:a1/00:00:72:00:00/40 tag 10 ncq 4096 in
res 41/84:08:00:ab:a1/00:00:72:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/100
ata6: EH complete
ata6.00: limiting speed to UDMA/33:PIO4
ata6.00: exception Emask 0x0 SAct 0x6108000d SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:10:00:aa:81/00:00:6f:00:00/40 tag 2 ncq 4096 in
res 41/84:08:00:aa:81/00:00:6f:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x114e0200 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:e0:00:aa:a1/00:00:72:00:00/40 tag 28 ncq 4096 in
res 41/84:08:00:aa:a1/00:00:72:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x200007e0 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:28:00:18:00/00:00:00:00:00/40 tag 5 ncq 4096 in
res 41/84:08:00:18:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x40074000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:90:00:b8:a1/00:00:72:00:00/40 tag 18 ncq 4096 in
res 41/84:08:00:b8:a1/00:00:72:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000002 FAULT at 0x4188ac [ IBUS ]
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
alx 0000:07:00.0 eth0: NIC Up: 1 Gbps Full
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
squashfs: version 4.0 (2009/01/31) Phillip Lougher
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: [/lib/systemd/system/casper.service:10] Failed to parse input specifier, ignoring: force-tty
systemd[1]: Mounted /rofs.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Read required files in advance...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Starting Nameserver information manager...
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Starting Various fixups to make systemd work better on Debian...
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Started Rebuild Hardware Database.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Nameserver information manager.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Starting udev Wait for Complete Device Initialization...
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started Various fixups to make systemd work better on Debian.
lp: driver loaded but no devices found
systemd[1]: Started Journal Service.
systemd-journald[457]: Received request to flush runtime journal from PID 1
ppdev: user-space parallel port driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
EDAC ie31200: No ECC support
nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000002 FAULT at 0x4188ac [ IBUS ]
cfg80211: Calling CRDA to update world regulatory domain
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003- 2014 Intel Corporation
iwlwifi 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input9
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
iwlwifi 0000:08:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
media: Linux media interface: v0.10
Linux video capture interface: v2.00
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: mono: mono_out=0x0
sound hdaudioC1D0: dig-out=0x1e/0x0
sound hdaudioC1D0: inputs:
sound hdaudioC1D0: Mic=0x18
sound hdaudioC1D0: Internal Mic=0x12
kvm: disabled by bios
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (174f:1474)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input15
iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:08:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
iwlwifi 0000:08:00.0: L1 Disabled - LTR Disabled
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000002 FAULT at 0x4188ac [ IBUS ]
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
iwlwifi 0000:08:00.0: L1 Disabled - LTR Disabled
iwlwifi 0000:08:00.0: Radio type=0x2-0x0-0x0
iwlwifi 0000:08:00.0: L1 Disabled - LTR Disabled
iwlwifi 0000:08:00.0: Radio type=0x2-0x0-0x0
nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000000 FAULT at 0x418880 [ IBUS ]
nouveau E[ PIBUS][0000:01:00.0] GPC0: 0x419eb4 0xbadf1000 (0x3800820c)
nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000000 FAULT at 0x405804 [ IBUS ]
nouveau E[ PIBUS][0000:01:00.0] HUB0: 0x404170 0x00000012 (0x0e008201)
nouveau E[ PGRAPH][0000:01:00.0] HUB_INIT timed out
nouveau E[ PGRAPH][0000:01:00.0] 409000 - done 0x00000204
nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000002 0x00000009
nouveau E[ PGRAPH][0000:01:00.0] 502000 - done 0x00000300
nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
nouveau E[ PGRAPH][0000:01:00.0] init failed, -16
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ata6.00: exception Emask 0x0 SAct 0x40000006 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:f0:68:7a:27/01:00:00:00:00/40 tag 30 ncq 131072 in
res 41/84:00:a8:7a:27/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x68 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:28:68:7b:27/01:00:00:00:00/40 tag 5 ncq 131072 in
res 41/84:00:a8:7b:27/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x6000000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:c8:68:7d:27/01:00:00:00:00/40 tag 25 ncq 131072 in
res 41/84:00:a8:7d:27/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x829e038 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:18:00:d9:a9/01:00:00:00:00/40 tag 3 ncq 131072 in
res 41/84:00:00:d9:a9/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0xfe000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:68:00:da:a9/01:00:00:00:00/40 tag 13 ncq 131072 in
res 41/84:00:00:da:a9/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x4200001f SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:f0:00:db:a9/01:00:00:00:00/40 tag 30 ncq 131072 in
res 41/84:00:00:db:a9/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x1f60 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:40:00:dc:a9/01:00:00:00:00/40 tag 8 ncq 131072 in
res 41/84:00:00:dc:a9/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x380 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:38:00:e1:a9/01:00:00:00:00/40 tag 7 ncq 131072 in
res 41/84:00:00:e1:a9/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x1c00 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:50:00:e2:a9/01:00:00:00:00/40 tag 10 ncq 131072 in
res 41/84:00:00:e2:a9/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:00:00:e3:a9/01:00:00:00:00/40 tag 0 ncq 131072 in
res 41/84:00:00:e3:a9/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x3ff100 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:60:00:ea:a9/01:00:00:00:00/40 tag 12 ncq 131072 in
res 41/84:00:00:ea:a9/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x7f800007 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:b8:00:eb:a9/01:00:00:00:00/40 tag 23 ncq 131072 in
res 41/84:00:0a:eb:a9/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x3800 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:58:00:ec:a9/01:00:00:00:00/40 tag 11 ncq 131072 in
res 41/84:00:00:ec:a9/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x1c000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:70:00:ed:a9/01:00:00:00:00/40 tag 14 ncq 131072 in
res 41/84:00:06:ed:a9/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x6000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:68:00:52:ab/01:00:00:00:00/40 tag 13 ncq 131072 in
res 41/84:00:00:52:ab/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x18000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:78:00:53:ab/01:00:00:00:00/40 tag 15 ncq 131072 in
res 41/84:00:00:53:ab/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x3000000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:c8:00:b5:ab/01:00:00:00:00/40 tag 25 ncq 131072 in
res 41/84:00:00:b5:ab/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x30000000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:e8:00:b7:ab/01:00:00:00:00/40 tag 29 ncq 131072 in
res 41/84:00:5e:b7:ab/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x40000002 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:08:00:b8:ab/01:00:00:00:00/40 tag 1 ncq 131072 in
res 41/84:00:00:b8:ab/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x3000000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:c0:00:cc:ab/01:00:00:00:00/40 tag 24 ncq 131072 in
res 41/84:00:00:cc:ab/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0xc000000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:d0:00:cd:ab/01:00:00:00:00/40 tag 26 ncq 131072 in
res 41/84:00:00:cd:ab/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:00:00:05:ac/01:00:00:00:00/40 tag 0 ncq 131072 in
res 41/84:00:00:05:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0xe00 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:48:00:08:ac/01:00:00:00:00/40 tag 9 ncq 131072 in
res 41/84:00:00:08:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x7000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:60:00:09:ac/01:00:00:00:00/40 tag 12 ncq 131072 in
res 41/84:00:00:09:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x1c00000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:b0:00:0a:ac/01:00:00:00:00/40 tag 22 ncq 131072 in
res 41/84:00:00:0a:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x70000000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:e8:00:0b:ac/01:00:00:00:00/40 tag 29 ncq 131072 in
res 41/84:00:00:0b:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:00:00:0c:ac/01:00:00:00:00/40 tag 0 ncq 131072 in
res 41/84:00:00:0c:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x1c0 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:38:00:0d:ac/01:00:00:00:00/40 tag 7 ncq 131072 in
res 41/84:00:00:0d:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0xe00 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:48:00:0e:ac/01:00:00:00:00/40 tag 9 ncq 131072 in
res 41/84:00:00:0e:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x38000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:80:00:0f:ac/01:00:00:00:00/40 tag 16 ncq 131072 in
res 41/84:00:00:0f:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x1c0000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:90:00:10:ac/01:00:00:00:00/40 tag 18 ncq 131072 in
res 41/84:00:00:10:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x1c000000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:d8:00:12:ac/01:00:00:00:00/40 tag 27 ncq 131072 in
res 41/84:00:00:12:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x60000001 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:e8:00:13:ac/01:00:00:00:00/40 tag 29 ncq 131072 in
res 41/84:00:00:13:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x38 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:28:00:15:ac/01:00:00:00:00/40 tag 5 ncq 131072 in
res 41/84:00:00:15:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0xc00 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:50:00:16:ac/01:00:00:00:00/40 tag 10 ncq 131072 in
res 41/84:00:00:16:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x3000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:60:00:17:ac/01:00:00:00:00/40 tag 12 ncq 131072 in
res 41/84:00:00:17:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x1a0000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:98:00:1a:ac/01:00:00:00:00/40 tag 19 ncq 131072 in
res 41/84:00:00:1a:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0xe00000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:a8:00:1b:ac/01:00:00:00:00/40 tag 21 ncq 131072 in
res 41/84:00:00:1b:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x78000000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:e8:00:1c:ac/01:00:00:00:00/40 tag 29 ncq 131072 in
res 41/84:00:00:1c:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:00:00:1d:ac/01:00:00:00:00/40 tag 0 ncq 131072 in
res 41/84:00:00:1d:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x1c00 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:58:00:20:ac/01:00:00:00:00/40 tag 11 ncq 131072 in
res 41/84:00:00:20:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0xe000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:68:00:21:ac/01:00:00:00:00/40 tag 13 ncq 131072 in
res 41/84:00:00:21:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0xc00000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:b8:00:25:ac/01:00:00:00:00/40 tag 23 ncq 131072 in
res 41/84:00:00:25:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0xc SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:10:00:2c:ac/01:00:00:00:00/40 tag 2 ncq 131072 in
res 41/84:00:e0:2c:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x30 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:20:00:2d:ac/01:00:00:00:00/40 tag 4 ncq 131072 in
res 41/84:00:60:2d:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x6000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/00:68:00:32:ac/01:00:00:00:00/40 tag 13 ncq 131072 in
res 41/84:00:5e:32:ac/00:01:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x380000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/80:98:40:63:ad/00:00:00:00:00/40 tag 19 ncq 65536 in
res 41/84:80:80:63:ad/00:00:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x1c00000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/d0:b0:c0:63:ad/00:00:00:00:00/40 tag 22 ncq 106496 in
res 41/84:d0:00:64:ad/00:00:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0xe000000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/40:d0:90:62:ad/00:00:00:00:00/40 tag 26 ncq 32768 in
res 41/84:40:a2:62:ad/00:00:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x3000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/d8:60:b8:6e:ad/00:00:00:00:00/40 tag 12 ncq 110592 in
res 41/84:d8:d8:6e:ad/00:00:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x18000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:80:70:70:ad/00:00:00:00:00/40 tag 16 ncq 4096 in
res 41/84:08:70:70:ad/00:00:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x30 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/e0:20:b0:75:ad/00:00:00:00:00/40 tag 4 ncq 114688 in
res 41/84:e0:b0:75:ad/00:00:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x280 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:48:78:77:ad/00:00:00:00:00/40 tag 9 ncq 4096 in
res 41/84:08:78:77:ad/00:00:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x1800 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:60:88:77:ad/00:00:00:00:00/40 tag 12 ncq 4096 in
res 41/84:08:8a:77:ad/00:00:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0xc000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:78:a0:77:ad/00:00:00:00:00/40 tag 15 ncq 4096 in
res 41/84:08:a0:77:ad/00:00:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x60000 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/20:90:a8:77:ad/00:00:00:00:00/40 tag 18 ncq 16384 in
res 41/84:20:ae:77:ad/00:00:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x7000000f SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/50:e0:f0:76:ad/00:00:00:00:00/40 tag 28 ncq 40960 in
res 41/84:50:fc:76:ad/00:00:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0x7c0 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/10:48:90:77:ad/00:00:00:00:00/40 tag 9 ncq 8192 in
res 41/84:10:90:77:ad/00:00:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
ata6.00: exception Emask 0x0 SAct 0xf800 SErr 0x0 action 0x6
ata6.00: irq_stat 0x40000008
ata6.00: failed command: READ FPDMA QUEUED
ata6.00: cmd 60/08:58:80:77:ad/00:00:00:00:00/40 tag 11 ncq 4096 in
res 41/84:08:80:77:ad/00:00:00:00:00/00 Emask 0x410 (ATA bus error)
ata6.00: status: { DRDY ERR }
ata6.00: error: { ICRC ABRT }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: configured for UDMA/33
ata6: EH complete
sda: sda2 sda3 sda4 sda5 sda6 sda7
sda: sda3 sda4 sda5 sda6 sda7
sda: sda4 sda5 sda6 sda7
sda: sda5 sda6 sda7
sda: sda6 sda7
sda: sda7
sda:
sda:
sda:
nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000002 FAULT at 0x4188ac [ IBUS ]
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000002 FAULT at 0x4188ac [ IBUS ]
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000002 FAULT at 0x4188ac [ IBUS ]
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000002 FAULT at 0x4188ac [ IBUS ]
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000002 FAULT at 0x4188ac [ IBUS ]
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000002 FAULT at 0x4188ac [ IBUS ]
mce: [Hardware Error]: Machine check events logged
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x00000002 FAULT at 0x4188ac [ IBUS ]