dmesg - test1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-7-generic (buildd@lgw01-60) (gcc version 5.2.1 20150825 (Ubuntu 5.2.1-15ubuntu5) ) #7-Ubuntu SMP Tue Sep 1 16:43:10 UTC 2015 (Ubuntu 4.2.0-7.7-generic 4.2.0)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
Disabled fast string operations
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf19efff] usable
BIOS-e820: [mem 0x00000000bf19f000-0x00000000bf69efff] reserved
BIOS-e820: [mem 0x00000000bf69f000-0x00000000bf79efff] ACPI NVS
BIOS-e820: [mem 0x00000000bf79f000-0x00000000bf7fefff] ACPI data
BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd20000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043dffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: LENOVO 4270CTO/4270CTO, BIOS 8BET62WW (1.42 ) 07/26/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x43e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0BF800000 mask FFF800000 uncachable
4 base 100000000 mask F00000000 write-back
5 base 200000000 mask E00000000 write-back
6 base 400000000 mask FC0000000 write-back
7 base 43E000000 mask FFE000000 uncachable
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fed000, 0x01fedfff] PGTABLE
BRK [0x01fee000, 0x01feefff] PGTABLE
BRK [0x01fef000, 0x01feffff] PGTABLE
init_memory_mapping: [mem 0x43de00000-0x43dffffff]
[mem 0x43de00000-0x43dffffff] page 2M
BRK [0x01ff0000, 0x01ff0fff] PGTABLE
init_memory_mapping: [mem 0x420000000-0x43ddfffff]
[mem 0x420000000-0x43ddfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x41fffffff]
[mem 0x400000000-0x41fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbf19efff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbeffffff] page 2M
[mem 0xbf000000-0xbf19efff] page 4k
init_memory_mapping: [mem 0xbf7ff000-0xbf7fffff]
[mem 0xbf7ff000-0xbf7fffff] page 4k
BRK [0x01ff1000, 0x01ff1fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 2M
BRK [0x01ff2000, 0x01ff2fff] PGTABLE
RAMDISK: [mem 0x3416a000-0x360acfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F00E0 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BF7FE120 0000AC (v01 LENOVO TP-8B 00001420 PTEC 00000002)
ACPI: FACP 0x00000000BF7E8000 0000F4 (v04 LENOVO TP-8B 00001420 PTL 00000002)
ACPI: DSDT 0x00000000BF7EB000 00EA91 (v01 LENOVO TP-8B 00001420 INTL 20061109)
ACPI: FACS 0x00000000BF72D000 000040
ACPI: FACS 0x00000000BF72D000 000040
ACPI: SLIC 0x00000000BF7FD000 000176 (v01 LENOVO TP-8B 00001420 PTEC 00000001)
ACPI: SSDT 0x00000000BF7FC000 000249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
ACPI: SSDT 0x00000000BF7FB000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
ACPI: SSDT 0x00000000BF7FA000 000797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
ACPI: HPET 0x00000000BF7E7000 000038 (v01 LENOVO TP-8B 00001420 PTL 00000002)
ACPI: APIC 0x00000000BF7E6000 000098 (v01 LENOVO TP-8B 00001420 PTL 00000002)
ACPI: MCFG 0x00000000BF7E5000 00003C (v01 LENOVO TP-8B 00001420 PTL 00000002)
ACPI: ECDT 0x00000000BF7E4000 000052 (v01 LENOVO TP-8B 00001420 PTL 00000002)
ACPI: ASF! 0x00000000BF7EA000 0000A5 (v32 LENOVO TP-8B 00001420 PTL 00000002)
ACPI: TCPA 0x00000000BF7E3000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
ACPI: SSDT 0x00000000BF7E2000 000AD7 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 0x00000000BF7E1000 000996 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: DMAR 0x00000000BF7E0000 0000B0 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: UEFI 0x00000000BF7DF000 00003E (v01 LENOVO TP-8B 00001420 PTL 00000002)
ACPI: UEFI 0x00000000BF7DE000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: UEFI 0x00000000BF7DD000 000292 (v01 LENOVO TP-8B 00001420 PTL 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043dffffff]
NODE_DATA(0) allocated [mem 0x43dfed000-0x43dff1fff]
[ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042d600000-ffff88043d5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000043dffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000bf19efff]
node 0: [mem 0x00000000bf7ff000-0x00000000bf7fffff]
node 0: [mem 0x0000000100000000-0x000000043dffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000043dffffff]
On node 0 totalpages: 4182332
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12167 pages used for memmap
DMA32 zone: 778656 pages, LIFO batch:31
Normal zone: 53120 pages used for memmap
Normal zone: 3399680 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbf19f000-0xbf69efff]
PM: Registered nosave memory: [mem 0xbf69f000-0xbf79efff]
PM: Registered nosave memory: [mem 0xbf79f000-0xbf7fefff]
PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffd1ffff]
PM: Registered nosave memory: [mem 0xffd20000-0xffffffff]
e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88043dc00000 s96344 r8192 d30632 u262144
pcpu-alloc: s96344 r8192 d30632 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4116960
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16351324K/16729328K available (7919K kernel code, 1233K rwdata, 3800K rodata, 1452K init, 1292K bss, 378004K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2392.308 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4784.61 BogoMIPS (lpj=9569232)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81ea1000 - ffffffff81ea8000)
ftrace: allocating 30878 entries in 121 pages
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar0: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
DMAR: RMRR base: 0x000000bf4d5000 end: 0x000000bf4ebfff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz (fam: 06, model: 2a, stepping: 07)
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
Disabled fast string operations
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
Disabled fast string operations
#3
Disabled fast string operations
#4
Disabled fast string operations
#5
Disabled fast string operations
#6
Disabled fast string operations
#7
Disabled fast string operations
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (38276.92 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbf69f000-0xbf79efff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 19:26:53, date: 09/10/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
ACPI : EC: EC started
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88042ADAA000 0008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88042AD3D800 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88042AD4B200 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PUBS] (on)
acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xd8325000-0xd832500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0x6070-0x6077]
pci 0000:00:16.3: reg 0x14: [mem 0xd832c000-0xd832cfff]
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xd8300000-0xd831ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xd832b000-0xd832bfff]
pci 0000:00:19.0: reg 0x18: [io 0x6040-0x605f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xd832a000-0xd832a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd8320000-0xd8323fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xd8329000-0xd83293ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x6068-0x606f]
pci 0000:00:1f.2: reg 0x14: [io 0x607c-0x607f]
pci 0000:00:1f.2: reg 0x18: [io 0x6060-0x6067]
pci 0000:00:1f.2: reg 0x1c: [io 0x6078-0x607b]
pci 0000:00:1f.2: reg 0x20: [io 0x6020-0x603f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd8328000-0xd83287ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd8324000-0xd83240ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:01:00.0: [10de:0dda] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd4000000-0xd5ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd3ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.1: [10de:0be9] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xd6000000-0xd6003fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd60fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd3ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xd8200000-0xd8201fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xd8200000-0xd82fffff]
acpiphp: Slot [1] registered
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xd7a00000-0xd81fffff]
pci 0000:00:1c.3: bridge window [mem 0xd6100000-0xd68fffff 64bit pref]
pci 0000:0d:00.0: [1180:e822] type 00 class 0x088001
pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
pci 0000:0d:00.0: reg 0x10: [mem 0xd7201000-0xd72010ff]
pci 0000:0d:00.0: supports D1 D2
pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0d:00.3: [1180:e832] type 00 class 0x0c0010
pci 0000:0d:00.3: reg 0x10: [mem 0xd7200000-0xd72007ff]
pci 0000:0d:00.3: supports D1 D2
pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 0d]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xd7200000-0xd79fffff]
pci 0000:00:1c.4: bridge window [mem 0xd6900000-0xd70fffff 64bit pref]
pci 0000:0e:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:0e:00.0: reg 0x10: [mem 0xd7100000-0xd7101fff 64bit]
pci 0000:0e:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 0e]
pci 0000:00:1c.6: bridge window [mem 0xd7100000-0xd71fffff]
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf19f000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
e820: reserve RAM buffer [mem 0x43e000000-0x43fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0400-0x047f] could not be reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1600-0x167f] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xd8400000-0xd85fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xd8600000-0xd87fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xd6080000-0xd60fffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd60fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd3ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xd8400000-0xd85fffff]
pci 0000:00:1c.0: bridge window [mem 0xd8600000-0xd87fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xd8200000-0xd82fffff]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xd7a00000-0xd81fffff]
pci 0000:00:1c.3: bridge window [mem 0xd6100000-0xd68fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0d]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xd7200000-0xd79fffff]
pci 0000:00:1c.4: bridge window [mem 0xd6900000-0xd70fffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 0e]
pci 0000:00:1c.6: bridge window [mem 0xd7100000-0xd71fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:01: resource 1 [mem 0xd4000000-0xd60fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd3ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xd8400000-0xd85fffff]
pci_bus 0000:02: resource 2 [mem 0xd8600000-0xd87fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xd8200000-0xd82fffff]
pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:05: resource 1 [mem 0xd7a00000-0xd81fffff]
pci_bus 0000:05: resource 2 [mem 0xd6100000-0xd68fffff 64bit pref]
pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:0d: resource 1 [mem 0xd7200000-0xd79fffff]
pci_bus 0000:0d: resource 2 [mem 0xd6900000-0xd70fffff 64bit pref]
pci_bus 0000:0e: resource 1 [mem 0xd7100000-0xd71fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 32012K (ffff88003416a000 - ffff8800360ad000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbb19f000-0xbf19f000] (64MB) mapped at [ffff8800bb19f000-ffff8800bf19efff]
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
hw unit of domain pp0-core 2^-16 Joules
hw unit of domain package 2^-16 Joules
hw unit of domain pp1-gpu 2^-16 Joules
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x29
microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x29
microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x29
microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x29
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1441913213.704:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90001c00000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (56 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery present)
0000:00:16.3: ttyS4 at I/O 0x6070 (irq = 19, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
tpm_tis 00:05: TPM is disabled/deactivated (0x6)
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:0e:00.0: xHCI Host Controller
xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:0e:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-7-generic xhci-hcd
usb usb1: SerialNumber: 0000:0e:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:0e:00.0: xHCI Host Controller
xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-7-generic xhci-hcd
usb usb2: SerialNumber: 0000:0e:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xd832a000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-7-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xd8329000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-7-generic ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.32.0-ioctl (2015-6-26) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Loaded X.509 cert 'Build time autogenerated kernel key: d2e63c2280b772eadede58ce52636af7d08e040a'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
tpm_tis 00:05: A TPM error (6) occurred attempting to read a pcr value
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 15:160:445
pcieport 0000:00:1c.6: hash matches
rtc_cmos 00:02: setting system clock to 2015-09-10 19:26:53 UTC (1441913213)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1452K (ffffffff81d36000 - ffffffff81ea1000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
Freeing unused kernel memory: 296K (ffff880001bb6000 - ffff880001c00000)
random: systemd-udevd urandom read with 5 bits of entropy available
ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no)
acpi device:0a: registered as cooling_device8
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input5
wmi: Mapper loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 8)
[drm] Initialized drm 1.1.0 20060810
sdhci-pci 0000:0d:00.0: No vmmc regulator found
sdhci-pci 0000:0d:00.0: No vqmmc regulator found
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1e impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG_.VID_ handle
checking generic (d1000000 130000) vs hw (c0000000 10000000)
checking generic (d1000000 130000) vs hw (d0000000 4000000)
fb: switching to nouveaufb from VESA VGA
Console: switching to colour dummy device 80x25
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0c3d00a1
nouveau [ DEVICE][0000:01:00.0] Chipset: GF106 (NVC3)
nouveau [ DEVICE][0000:01:00.0] Family : NVC0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xd8328000 port 0xd8328180 irq 34
ata3: SATA max UDMA/133 abar m2048@0xd8328000 port 0xd8328200 irq 34
ata4: SATA max UDMA/133 abar m2048@0xd8328000 port 0xd8328280 irq 34
ata5: SATA max UDMA/133 abar m2048@0xd8328000 port 0xd8328300 irq 34
ata6: DUMMY
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 70.06.33.00.04
firewire_ohci 0000:0d:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
nouveau W[ PFB][0000:01:00.0][0x00000000] reclocking of this ram type unsupported
nouveau [ PFB][0000:01:00.0] RAM type: DDR3
nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:01:00.0] GPU voltage: 880000uv
nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
nouveau [ CLK][0000:01:00.0] 03: core 50 MHz memory 135 MHz
nouveau [ CLK][0000:01:00.0] 07: core 202 MHz memory 324 MHz
nouveau [ CLK][0000:01:00.0] 0f: core 550 MHz memory 900 MHz
nouveau [ CLK][0000:01:00.0] --: core 202 MHz memory 324 MHz
[TTM] Zone kernel: Available graphics memory: 8192686 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 01800323 00010034
nouveau [ DRM] DCB outp 01: 02011300 00000000
nouveau [ DRM] DCB outp 02: 028423a6 0f220010
nouveau [ DRM] DCB outp 03: 02842362 00020010
nouveau [ DRM] DCB outp 04: 048233b6 0f220010
nouveau [ DRM] DCB outp 05: 04823372 00020010
nouveau [ DRM] DCB outp 06: 088343c6 0f220010
nouveau [ DRM] DCB outp 07: 08834382 00020010
nouveau [ DRM] DCB conn 00: 00000040
nouveau [ DRM] DCB conn 01: 00000100
nouveau [ DRM] DCB conn 02: 00001246
nouveau [ DRM] DCB conn 03: 00002346
nouveau [ DRM] DCB conn 04: 00010446
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau [ DRM] MM: using COPY0 for buffer copies
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:d1:dd:0c
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
e1000e 0000:00:19.0 enp0s25: renamed from eth0
usb 3-1: New USB device found, idVendor=8087, idProduct=0024
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
usb 4-1: New USB device found, idVendor=8087, idProduct=0024
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ata2.00: ATAPI: Optiarc DVD RW AD-7740H, 1.S0, max UDMA/100
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7740H 1.S0 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
firewire_core 0000:0d:00.3: created device fw0: GUID f0def1ffd1dd0cff, S400
usb 3-1.1: new low-speed USB device number 3 using ehci-pci
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: ATA-10: Crucial_CT500MX200SSD3, MU02, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Crucial_CT500MX2 MU02 PQ: 0 ANSI: 5
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: Enabling discard_zeroes_data
sda: sda1 sda2 < sda5 >
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sda] Attached SCSI disk
usb 3-1.1: New USB device found, idVendor=0765, idProduct=5001
usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hid-generic 0003:0765:5001.0001: hiddev0,hidraw0: USB HID v1.00 Device [HID 0765:5001] on usb-0000:00:1a.0-1.1/input0
tsc: Refined TSC clocksource calibration: 2392.229 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x227b8a85aa5, max_idle_ns: 440795284834 ns
usb 3-1.2: new full-speed USB device number 4 using ehci-pci
usb 3-1.2: New USB device found, idVendor=046d, idProduct=c52b
usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.2: Product: USB Receiver
usb 3-1.2: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input2
usb 3-1.3: new full-speed USB device number 5 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
input: Logitech M510 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.2/0003:046D:C52B.0004/0003:046D:1025.0005/input/input7
logitech-hidpp-device 0003:046D:1025.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech M510] on usb-0000:00:1a.0-1.2:1
ata4: SATA link down (SStatus 0 SControl 300)
usb 3-1.3: New USB device found, idVendor=147e, idProduct=2016
usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.3: Product: Biometric Coprocessor
usb 3-1.3: Manufacturer: UPEK
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
usb 3-1.4: new full-speed USB device number 6 using ehci-pci
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=217f
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.4: Product: Broadcom Bluetooth Device
usb 3-1.4: Manufacturer: Broadcom Corp
usb 3-1.4: SerialNumber: 60D819ABB3FC
usb 3-1.6: new high-speed USB device number 7 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
usb 3-1.6: New USB device found, idVendor=04f2, idProduct=b217
usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.6: Product: Integrated Camera
usb 3-1.6: Manufacturer: Chicony Electronics Co., Ltd.
nouveau [ DRM] allocated 1920x1080 fb: 0x60000, bo ffff880425c8dc00
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.2.2 20120801 for 0000:01:00.0 on minor 0
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
systemd[1]: Created slice Root Slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Reached target Slices.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Started Read required files in advance.
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Journal Service.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[287]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
clocksource: Switched to clocksource tsc
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB_.PCI0.LPC_.PMIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPC_.LPIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPC_.LPIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPC_.LPIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
Non-volatile memory driver v1.3
media: Linux media interface: v0.10
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS 8BET62WW (1.42 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad W520, model 4270CTO
thinkpad_acpi: detected a 16-level brightness capable ThinkPad
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
Linux video capture interface: v2.00
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
audit: type=1400 audit(1441913215.383:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=442 comm="apparmor_parser"
audit: type=1400 audit(1441913215.383:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=442 comm="apparmor_parser"
snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_conexant hdaudioC0D0: inputs:
snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23
snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b
snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a
snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
usbcore: registered new interface driver btusb
audit: type=1400 audit(1441913215.399:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=442 comm="apparmor_parser"
audit: type=1400 audit(1441913215.399:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=442 comm="apparmor_parser"
audit: type=1400 audit(1441913215.399:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=442 comm="apparmor_parser"
audit: type=1400 audit(1441913215.399:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=442 comm="apparmor_parser"
uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
audit: type=1400 audit(1441913215.423:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=442 comm="apparmor_parser"
audit: type=1400 audit(1441913215.423:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=442 comm="apparmor_parser"
audit: type=1400 audit(1441913215.423:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=442 comm="apparmor_parser"
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Adding 16727036k swap on /dev/sda5. Priority:-1 extents:1 across:16727036k SSFS
cgroup: new mount options do not match the existing superblock, will be ignored
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
random: nonblocking pool is initialized
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
show_signal_msg: 42 callbacks suppressed
glmark2[16366]: segfault at 0 ip (null) sp 00007ffec1ba5448 error 14 in glmark2[400000+139000]
perf interrupt took too long (2518 > 2500), lowering kernel.perf_event_max_sample_rate to 50000