dmesg - asx100-1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-573.3.1.el6.x86_64 (mockbuild@c6b8.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-16) (GCC) ) #1 SMP Thu Aug 13 22:55:16 UTC 2015
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000098400 (usable)
BIOS-e820: 0000000000098400 - 0000000000099c00 (reserved)
BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bddac000 (usable)
BIOS-e820: 00000000bddac000 - 00000000bddde000 (ACPI data)
BIOS-e820: 00000000bddde000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000083ffff000 (usable)
DMI 2.8 present.
SMBIOS version 2.8 @ 0xF4F40
DMI: HP ProLiant SL230s Gen8 /, BIOS P75 02/10/2014
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x83ffff max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbddac max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bddac000
0000000000 - 0080000000 page 1G
0080000000 - 00bdc00000 page 2M
00bdc00000 - 00bddac000 page 4k
kernel direct mapping tables up to bddac000 @ 8000-b000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-000000083ffff000
0100000000 - 0800000000 page 1G
0800000000 - 083fe00000 page 2M
083fe00000 - 083ffff000 page 4k
kernel direct mapping tables up to 83ffff000 @ a000-d000
RAMDISK: 36590000 - 37fef4b5
ACPI: Deleted _OSI()
ACPI: Deleted _OSI()
ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
ACPI: XSDT 00000000bddaed00 000CC (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: FACP 00000000bddaee40 000F4 (v03 HP ProLiant 00000002 Ò? 0000162E)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-611)
ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 (20090903/tbfadt-611)
ACPI: DSDT 00000000bddaef40 026DC (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 00000000bddac140 00040
ACPI: SPCR 00000000bddac180 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E)
ACPI: MCFG 00000000bddac200 0003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 00000000bddac240 00038 (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: FFFF 00000000bddac280 00064 (v02 HP ProLiant 00000002 Ò? 0000162E)
ACPI: SPMI 00000000bddac300 00040 (v05 HP ProLiant 00000001 Ò? 0000162E)
ACPI: ERST 00000000bddac340 00230 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: APIC 00000000bddac580 0025E (v01 HP ProLiant 00000002 00000000)
ACPI: SRAT 00000000bddac800 00750 (v01 HP Proliant 00000001 Ò? 0000162E)
ACPI: FFFF 00000000bddacf80 00176 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: BERT 00000000bddad100 00030 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: HEST 00000000bddad140 000BC (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: DMAR 00000000bddad200 0039C (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: FFFF 00000000bddaec40 00030 (v01 HP ProLiant 00000001 00000000)
ACPI: PCCT 00000000bddaec80 0006E (v01 HP Proliant 00000001 PH 0000504D)
ACPI: SSDT 00000000bddb1640 00103 (v03 HP CRSPCI0 00000002 HP 00000001)
ACPI: SSDT 00000000bddb1780 000E6 (v02 HP riser0a 00000002 INTL 20030228)
ACPI: SSDT 00000000bddb1880 00BB9 (v01 HP pcc 00000001 INTL 20120503)
ACPI: SSDT 00000000bddb2440 00377 (v01 HP pmab 00000001 INTL 20120503)
ACPI: SSDT 00000000bddb27c0 05524 (v01 HP pcc2 00000001 INTL 20120503)
ACPI: SSDT 00000000bddb7d00 02314 (v01 INTEL PPM RCM 00000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 0 -> APIC 5 -> Node 0
SRAT: PXM 0 -> APIC 6 -> Node 0
SRAT: PXM 0 -> APIC 7 -> Node 0
SRAT: PXM 0 -> APIC 8 -> Node 0
SRAT: PXM 0 -> APIC 9 -> Node 0
SRAT: PXM 0 -> APIC 10 -> Node 0
SRAT: PXM 0 -> APIC 11 -> Node 0
SRAT: PXM 0 -> APIC 12 -> Node 0
SRAT: PXM 0 -> APIC 13 -> Node 0
SRAT: PXM 0 -> APIC 14 -> Node 0
SRAT: PXM 0 -> APIC 15 -> Node 0
SRAT: Node 0 PXM 0 0-840000000
NUMA: Using 63 for the hash shift.
Bootmem setup node 0 0000000000000000-000000083ffff000
NODE_DATA [000000000000c000 - 000000000003ffff]
bootmap [0000000000100000 - 0000000000207fff] pages 108
(8 early reservations) ==> bootmem [0000000000 - 083ffff000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000203cb24] TEXT DATA BSS ==> [0001000000 - 000203cb24]
#3 [0036590000 - 0037fef4b5] RAMDISK ==> [0036590000 - 0037fef4b5]
#4 [0000082000 - 0000100000] BIOS reserved ==> [0000082000 - 0000100000]
#5 [000203d000 - 000203d6a1] BRK ==> [000203d000 - 000203d6a1]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000000c000] PGTABLE ==> [000000a000 - 000000c000]
found SMP MP-table at [ffff8800000f4f80] f4f80
Reserving 131MB of memory at 48MB for crashkernel (System RAM: 33791MB)
[ffffea0000000000-ffffea000ebfffff] PMD -> [ffff880028600000-ffff8800363fffff] on node 0
[ffffea000ec00000-ffffea001cdfffff] PMD -> [ffff880038000000-ffff8800461fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0083ffff
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x00000098
0: 0x00000100 -> 0x000bddac
0: 0x00100000 -> 0x0083ffff
On node 0 totalpages: 8379714
DMA zone: 56 pages used for memmap
DMA zone: 133 pages reserved
DMA zone: 3802 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 759268 pages, LIFO batch:31
Normal zone: 103936 pages used for memmap
Normal zone: 7498239 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x00] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 0, version 32, address 0xfec10000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 64 CPUs, 48 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 0000000000098000 - 0000000000099000
PM: Registered nosave memory: 0000000000099000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000bddac000 - 00000000bddde000
PM: Registered nosave memory: 00000000bddde000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fee10000
PM: Registered nosave memory: 00000000fee10000 - 00000000ff800000
PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:64 nr_cpu_ids:64 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880046200000 s91224 r8192 d23464 u131072
pcpu-alloc: s91224 r8192 d23464 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
pcpu-alloc: [0] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
pcpu-alloc: [0] 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8261309
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
dmar: Queued invalidation will be enabled to support x2apic and Intr-remapping.
Memory: 32807972k/34603004k available (5394k kernel code, 1084148k absent, 710884k reserved, 7014k data, 1296k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1328
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
TSC: cpu family 6 model 45, tsc initial value = 3a84235cd6f
Fast TSC calibration using PIT
Detected 2593.861 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.72 BogoMIPS (lpj=2593861)
pid_max: default: 65536 minimum: 512
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 20 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22128 entries in 87 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000f8ffe000 flags: 0x1
dmar: IOMMU 0: reg_base_addr f8ffe000 ver 1:0 cap d2078c106f0462 ecap f020fe
dmar: RMRR base: 0x000000bdffd000 end: 0x000000bdffffff
dmar: RMRR base: 0x000000bdff6000 end: 0x000000bdffcfff
dmar: RMRR base: 0x000000bdf83000 end: 0x000000bdf84fff
dmar: RMRR base: 0x000000bdf7f000 end: 0x000000bdf82fff
dmar: RMRR base: 0x000000bdf6f000 end: 0x000000bdf7efff
dmar: RMRR base: 0x000000bdf6e000 end: 0x000000bdf6efff
dmar: RMRR base: 0x000000000f4000 end: 0x000000000f4fff
dmar: RMRR base: 0x000000000e8000 end: 0x000000000e8fff
dmar: RMRR base: 0x000000bddde000 end: 0x000000bdddefff
dmar: ATSR flags: 0x0
IOAPIC id 8 under DRHD base 0xf8ffe000
IOAPIC id 0 under DRHD base 0xf8ffe000
HPET id 0 under DRHD base 0xf8ffe000
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
APIC routing finalized to physical flat.
alloc irq_desc for 48 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
Brought up 16 CPUs
Total of 16 processors activated (83003.55 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2672 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base c0000000 segment 0 buses 0 - 255
PCI: MCFG area at c0000000 reserved in E820
PCI: Using MMCONFIG at c0000000 - cfffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-1f])
pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xfbffffff]
pci_root PNP0A08:00: host bridge window [io 0x1000-0xffff]
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0x0fff]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03bb]
pci_root PNP0A08:00: host bridge window [io 0x03c0-0x03df]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb]
pci_bus 0000:00: root bus resource [io 0x03c0-0x03df]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: PME# disabled
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: PME# disabled
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: PME# disabled
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:04.0: reg 10: [mem 0xfacf0000-0xfacf3fff 64bit]
pci 0000:00:04.1: reg 10: [mem 0xface0000-0xface3fff 64bit]
pci 0000:00:04.2: reg 10: [mem 0xfacd0000-0xfacd3fff 64bit]
pci 0000:00:04.3: reg 10: [mem 0xfacc0000-0xfacc3fff 64bit]
pci 0000:00:04.4: reg 10: [mem 0xfacb0000-0xfacb3fff 64bit]
pci 0000:00:04.5: reg 10: [mem 0xfaca0000-0xfaca3fff 64bit]
pci 0000:00:04.6: reg 10: [mem 0xfac90000-0xfac93fff 64bit]
pci 0000:00:04.7: reg 10: [mem 0xfac80000-0xfac83fff 64bit]
pci 0000:00:05.4: reg 10: [mem 0xfac70000-0xfac70fff]
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xfac60000-0xfac603ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xfac50000-0xfac503ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0x4000-0x4007]
pci 0000:00:1f.2: reg 14: [io 0x4008-0x400b]
pci 0000:00:1f.2: reg 18: [io 0x4010-0x4017]
pci 0000:00:1f.2: reg 1c: [io 0x4018-0x401b]
pci 0000:00:1f.2: reg 20: [io 0x4020-0x403f]
pci 0000:00:1f.2: reg 24: [mem 0xfac40000-0xfac407ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:05:00.0: reg 10: [io 0x6000-0x60ff]
pci 0000:05:00.0: reg 14: [mem 0xfbff0000-0xfbffffff 64bit]
pci 0000:05:00.0: reg 1c: [mem 0xfbf80000-0xfbfbffff 64bit]
pci 0000:05:00.0: reg 30: [mem 0x00000000-0x000fffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 05-05]
pci 0000:00:01.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:01.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:01.1: PCI bridge to [bus 06-06]
pci 0000:00:02.0: PCI bridge to [bus 08-08]
pci 0000:00:02.1: PCI bridge to [bus 0a-0a]
pci 0000:00:02.2: PCI bridge to [bus 09-09]
pci 0000:00:02.3: PCI bridge to [bus 0b-0b]
pci 0000:00:03.0: PCI bridge to [bus 07-07]
pci 0000:00:03.1: PCI bridge to [bus 0c-0c]
pci 0000:00:03.2: PCI bridge to [bus 0d-0d]
pci 0000:00:03.3: PCI bridge to [bus 0e-0e]
pci 0000:00:11.0: PCI bridge to [bus 04-04]
pci 0000:02:00.0: reg 10: [mem 0xfbe00000-0xfbefffff]
pci 0000:02:00.0: reg 18: [io 0x5000-0x501f]
pci 0000:02:00.0: reg 1c: [mem 0xfbdf0000-0xfbdf3fff]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:02:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:02:00.1: reg 10: [mem 0xfbc00000-0xfbcfffff]
pci 0000:02:00.1: reg 18: [io 0x5020-0x503f]
pci 0000:02:00.1: reg 1c: [mem 0xfbbf0000-0xfbbf3fff]
pci 0000:02:00.1: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:02:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:02:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xfbb00000-0xfbefffff]
pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 14: [mem 0xfbaf0000-0xfbaf01ff]
pci 0000:01:00.0: reg 18: [io 0x3400-0x34ff]
pci 0000:01:00.1: reg 10: [mem 0xf9000000-0xf9ffffff pref]
pci 0000:01:00.1: reg 14: [mem 0xfbae0000-0xfbae3fff]
pci 0000:01:00.1: reg 18: [mem 0xfb000000-0xfb7fffff]
pci 0000:01:00.2: reg 10: [io 0x3800-0x38ff]
pci 0000:01:00.2: reg 14: [mem 0xfaff0000-0xfaff00ff]
pci 0000:01:00.2: reg 18: [mem 0xfae00000-0xfaefffff]
pci 0000:01:00.2: reg 1c: [mem 0xfad80000-0xfadfffff]
pci 0000:01:00.2: reg 20: [mem 0xfad70000-0xfad77fff]
pci 0000:01:00.2: reg 24: [mem 0xfad60000-0xfad67fff]
pci 0000:01:00.2: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:01:00.2: PME# disabled
pci 0000:01:00.4: reg 20: [io 0x3c00-0x3c1f]
pci 0000:00:1c.7: PCI bridge to [bus 01-01]
pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbafffff]
pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfbffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03bb] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03c0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.VRP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT1A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT1B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT2A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT2B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT2C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT2D._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT3A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT3B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT3C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT3D._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Firmware did not grant requested _OSC control
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled.
vgaarb: device added: PCI:0000:01:00.1,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.1
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 49 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 49, 50, 51, 52, 53, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 49 for MSI
hpet: hpet3 irq 50 for MSI
hpet: hpet4 irq 51 for MSI
hpet: hpet5 irq 52 for MSI
hpet: hpet6 irq 53 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xf8ffe000-0xf8ffffff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0070-0x0077]
pnp 00:02: [io 0x0408-0x040f]
pnp 00:02: [io 0x04d0-0x04d1]
pnp 00:02: [io 0x0020-0x003f]
pnp 00:02: [io 0x00a0-0x00bf]
pnp 00:02: [io 0x0090-0x009f]
pnp 00:02: [io 0x0050-0x0053]
pnp 00:02: [io 0x0310-0x0315]
pnp 00:02: [io 0x0316-0x0317]
pnp 00:02: [io 0x0700-0x071f]
pnp 00:02: [io 0x0880-0x08ff]
pnp 00:02: [io 0x0900-0x097f]
pnp 00:02: [io 0x0010-0x001f]
pnp 00:02: [io 0x0cd4-0x0cd7]
pnp 00:02: [io 0x0cd0-0x0cd3]
pnp 00:02: [io 0x0f50-0x0f58]
pnp 00:02: [io 0x00f0]
pnp 00:02: [io 0x0ca0-0x0ca1]
pnp 00:02: [io 0x0ca4-0x0ca5]
pnp 00:02: [mem 0xc0000000-0xcfffffff]
pnp 00:02: [mem 0xfe000000-0xfebfffff]
pnp 00:02: [mem 0xfc000000-0xfc000fff]
pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
pnp 00:02: [mem 0xfed30000-0xfed3ffff]
pnp 00:02: [mem 0xfee00000-0xfee00fff]
pnp 00:02: [mem 0xff800000-0xffffffff]
pnp 00:02: [io 0x03f8-0x03ff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io 0x0ca2-0x0ca3]
pnp 00:03: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [dma 7]
pnp 00:05: [io 0x0000-0x000f]
pnp 00:05: [io 0x0080-0x008f]
pnp 00:05: [io 0x00c0-0x00df]
pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x002e-0x002f]
pnp 00:07: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:08: [irq 3]
pnp 00:08: [io 0x02f8-0x02ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:09: [io 0x0070-0x0071]
pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:0a: [io 0x0060]
pnp 00:0a: [io 0x0064]
pnp 00:0a: [irq 1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:0b: [irq 12]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xf8ffe000-0xf8ffffff] could not be reserved
system 00:02: [io 0x0408-0x040f] has been reserved
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0310-0x0315] has been reserved
system 00:02: [io 0x0316-0x0317] has been reserved
system 00:02: [io 0x0700-0x071f] has been reserved
system 00:02: [io 0x0880-0x08ff] has been reserved
system 00:02: [io 0x0900-0x097f] has been reserved
system 00:02: [io 0x0cd4-0x0cd7] has been reserved
system 00:02: [io 0x0cd0-0x0cd3] has been reserved
system 00:02: [io 0x0f50-0x0f58] has been reserved
system 00:02: [io 0x0ca0-0x0ca1] has been reserved
system 00:02: [io 0x0ca4-0x0ca5] has been reserved
system 00:02: [io 0x03f8-0x03ff] has been reserved
system 00:02: [mem 0xc0000000-0xcfffffff] has been reserved
system 00:02: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:02: [mem 0xfc000000-0xfc000fff] has been reserved
system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:02: [mem 0xfed30000-0xfed3ffff] has been reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: [mem 0xff800000-0xffffffff] has been reserved
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 02-02] add_size 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 100000
pci 0000:00:01.0: BAR 15: assigned [mem 0xf8000000-0xf80fffff pref]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8100000-0xf82fffff pref]
pci 0000:05:00.0: BAR 6: assigned [mem 0xf8000000-0xf80fffff pref]
pci 0000:00:01.0: PCI bridge to [bus 05-05]
pci 0000:00:01.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:01.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf80fffff pref]
pci 0000:00:01.1: PCI bridge to [bus 06-06]
pci 0000:00:02.0: PCI bridge to [bus 08-08]
pci 0000:00:02.1: PCI bridge to [bus 0a-0a]
pci 0000:00:02.2: PCI bridge to [bus 09-09]
pci 0000:00:02.3: PCI bridge to [bus 0b-0b]
pci 0000:00:03.0: PCI bridge to [bus 07-07]
pci 0000:00:03.1: PCI bridge to [bus 0c-0c]
pci 0000:00:03.2: PCI bridge to [bus 0d-0d]
pci 0000:00:03.3: PCI bridge to [bus 0e-0e]
pci 0000:00:11.0: PCI bridge to [bus 04-04]
pci 0000:02:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:02:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:02:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:02:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:02:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:02:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:02:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:02:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:02:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:02:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:02:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:02:00.0: res[7]=[mem 0x00000000-0xffffffffffffffff 64bit pref] get_res_add_size add_size 20000
pci 0000:02:00.0: res[10]=[mem 0x00000000-0xffffffffffffffff 64bit pref] get_res_add_size add_size 20000
pci 0000:02:00.1: res[7]=[mem 0x00000000-0xffffffffffffffff 64bit pref] get_res_add_size add_size 20000
pci 0000:02:00.1: res[10]=[mem 0x00000000-0xffffffffffffffff 64bit pref] get_res_add_size add_size 20000
pci 0000:02:00.0: BAR 6: assigned [mem 0xf8100000-0xf817ffff pref]
pci 0000:02:00.1: BAR 6: assigned [mem 0xf8180000-0xf81fffff pref]
pci 0000:02:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:02:00.0: BAR 7: assigned [mem 0xf8200000-0xf821ffff 64bit pref]
pci 0000:02:00.0: BAR 7: set to [mem 0xf8200000-0xf821ffff 64bit pref] (PCI address [0xf8200000-0xf821ffff]
pci 0000:02:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:02:00.0: BAR 10: assigned [mem 0xf8220000-0xf823ffff 64bit pref]
pci 0000:02:00.0: BAR 10: set to [mem 0xf8220000-0xf823ffff 64bit pref] (PCI address [0xf8220000-0xf823ffff]
pci 0000:02:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:02:00.1: BAR 7: assigned [mem 0xf8240000-0xf825ffff 64bit pref]
pci 0000:02:00.1: BAR 7: set to [mem 0xf8240000-0xf825ffff 64bit pref] (PCI address [0xf8240000-0xf825ffff]
pci 0000:02:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:02:00.1: BAR 10: assigned [mem 0xf8260000-0xf827ffff 64bit pref]
pci 0000:02:00.1: BAR 10: set to [mem 0xf8260000-0xf827ffff 64bit pref] (PCI address [0xf8260000-0xf827ffff]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xfbb00000-0xfbefffff]
pci 0000:00:1c.0: bridge window [mem 0xf8100000-0xf82fffff pref]
pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref]
pci 0000:00:1c.7: PCI bridge to [bus 01-01]
pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbafffff]
pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
alloc irq_desc for 45 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:01.0: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:01.1: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:01.1: setting latency timer to 64
pci 0000:00:02.0: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.1: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:02.1: setting latency timer to 64
pci 0000:00:02.2: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:02.2: setting latency timer to 64
pci 0000:00:02.3: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:02.3: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:03.1: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:03.1: setting latency timer to 64
pci 0000:00:03.2: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:03.2: setting latency timer to 64
pci 0000:00:03.3: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:03.3: setting latency timer to 64
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:11.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:11.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff]
pci_bus 0000:00: resource 6 [io 0x0000-0x03af]
pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff]
pci_bus 0000:00: resource 9 [io 0x03b0-0x03bb]
pci_bus 0000:00: resource 10 [io 0x03c0-0x03df]
pci_bus 0000:00: resource 11 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:05: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:05: resource 2 [mem 0xf8000000-0xf80fffff pref]
pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:02: resource 1 [mem 0xfbb00000-0xfbefffff]
pci_bus 0000:02: resource 2 [mem 0xf8100000-0xf82fffff pref]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xfad00000-0xfbafffff]
pci_bus 0000:01: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref]
pci_bus 0000:03: resource 4 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:03: resource 5 [io 0x1000-0xffff]
pci_bus 0000:03: resource 6 [io 0x0000-0x03af]
pci_bus 0000:03: resource 7 [io 0x03e0-0x0cf7]
pci_bus 0000:03: resource 8 [io 0x0d00-0x0fff]
pci_bus 0000:03: resource 9 [io 0x03b0-0x03bb]
pci_bus 0000:03: resource 10 [io 0x03c0-0x03df]
pci_bus 0000:03: resource 11 [mem 0x000a0000-0x000bffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
alloc irq_desc for 21 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1a.0: PCI INT A disabled
alloc irq_desc for 20 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:01:00.1: Boot video device
pci 0000:01:00.4: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.4: PCI INT B disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 27005k freed
dmar: Device scope device [0000:00:00.00] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:00.00] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:00.00] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:00.00] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:00.00] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:00.00] not found
dmar: Device scope device [0000:00:1f.05] not found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
futex hash table entries: 16384 (order: 8, 1048576 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1440980005.988:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key C7CF5CF79F2C214F
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
ACPI: \_PR_.CP10: failed to get CPU APIC ID.
ACPI: \_PR_.CP11: failed to get CPU APIC ID.
ACPI: \_PR_.CP12: failed to get CPU APIC ID.
ACPI: \_PR_.CP13: failed to get CPU APIC ID.
ACPI: \_PR_.CP14: failed to get CPU APIC ID.
ACPI: \_PR_.CP15: failed to get CPU APIC ID.
ACPI: \_PR_.CP16: failed to get CPU APIC ID.
ACPI: \_PR_.CP17: failed to get CPU APIC ID.
ACPI: \_PR_.CP18: failed to get CPU APIC ID.
ACPI: \_PR_.CP19: failed to get CPU APIC ID.
ACPI: \_PR_.CP1A: failed to get CPU APIC ID.
ACPI: \_PR_.CP1B: failed to get CPU APIC ID.
ACPI: \_PR_.CP1C: failed to get CPU APIC ID.
ACPI: \_PR_.CP1D: failed to get CPU APIC ID.
ACPI: \_PR_.CP1E: failed to get CPU APIC ID.
ACPI: \_PR_.CP1F: failed to get CPU APIC ID.
ACPI: \_PR_.CP20: failed to get CPU APIC ID.
ACPI: \_PR_.CP21: failed to get CPU APIC ID.
ACPI: \_PR_.CP22: failed to get CPU APIC ID.
ACPI: \_PR_.CP23: failed to get CPU APIC ID.
ACPI: \_PR_.CP24: failed to get CPU APIC ID.
ACPI: \_PR_.CP25: failed to get CPU APIC ID.
ACPI: \_PR_.CP26: failed to get CPU APIC ID.
ACPI: \_PR_.CP27: failed to get CPU APIC ID.
ACPI: \_PR_.CP28: failed to get CPU APIC ID.
ACPI: \_PR_.CP29: failed to get CPU APIC ID.
ACPI: \_PR_.CP2A: failed to get CPU APIC ID.
ACPI: \_PR_.CP2B: failed to get CPU APIC ID.
ACPI: \_PR_.CP2C: failed to get CPU APIC ID.
ACPI: \_PR_.CP2D: failed to get CPU APIC ID.
ACPI: \_PR_.CP2E: failed to get CPU APIC ID.
ACPI: \_PR_.CP2F: failed to get CPU APIC ID.
ACPI: \_PR_.CP30: failed to get CPU APIC ID.
ACPI: \_PR_.CP31: failed to get CPU APIC ID.
ACPI: \_PR_.CP32: failed to get CPU APIC ID.
ACPI: \_PR_.CP33: failed to get CPU APIC ID.
ACPI: \_PR_.CP34: failed to get CPU APIC ID.
ACPI: \_PR_.CP35: failed to get CPU APIC ID.
ACPI: \_PR_.CP36: failed to get CPU APIC ID.
ACPI: \_PR_.CP37: failed to get CPU APIC ID.
ACPI: \_PR_.CP38: failed to get CPU APIC ID.
ACPI: \_PR_.CP39: failed to get CPU APIC ID.
ACPI: \_PR_.CP3A: failed to get CPU APIC ID.
ACPI: \_PR_.CP3B: failed to get CPU APIC ID.
ACPI: \_PR_.CP3C: failed to get CPU APIC ID.
ACPI: \_PR_.CP3D: failed to get CPU APIC ID.
ACPI: \_PR_.CP3E: failed to get CPU APIC ID.
ACPI: \_PR_.CP3F: failed to get CPU APIC ID.
[Firmware Bug]: No valid trip found
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 21, io mem 0xfac60000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-573.3.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 20, io mem 0xfac50000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-573.3.1.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:01:00.4: PCI INT B -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:01:00.4: setting latency timer to 64
uhci_hcd 0000:01:00.4: UHCI Host Controller
uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:00.4: irq 16, io base 0x00003c00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-573.3.1.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:01:00.4
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:09: RTC can wake from S4
rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:09: setting system clock to 2015-08-31 00:13:28 UTC (1440980008)
Initalizing network drop monitor service
Freeing unused kernel memory: 1296k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 732k freed
Freeing unused kernel memory: 1576k freed
dracut: dracut-004-388.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
udev: starting version 147
usb 1-1: new high speed USB device number 2 using ehci_hcd
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
Refined TSC clocksource calibration: 2593.747 MHz.
Switching to clocksource tsc
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ahci 0000:00:1f.2: version 3.0
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
alloc irq_desc for 54 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ahci 0000:00:1f.2: irq 54 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
hub 1-1:1.0: 6 ports detected
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfac40000 port 0xfac40100 irq 54
ata2: SATA max UDMA/133 abar m2048@0xfac40000 port 0xfac40180 irq 54
ata3: SATA max UDMA/133 abar m2048@0xfac40000 port 0xfac40200 irq 54
ata4: SATA max UDMA/133 abar m2048@0xfac40000 port 0xfac40280 irq 54
ata5: SATA max UDMA/133 abar m2048@0xfac40000 port 0xfac40300 irq 54
ata6: SATA max UDMA/133 abar m2048@0xfac40000 port 0xfac40380 irq 54
usb 2-1: new high speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata1: SATA link down (SStatus 0 SControl 300)
usb 2-1.3: new high speed USB device number 3 using ehci_hcd
usb 2-1.3: New USB device found, idVendor=0424, idProduct=2660
ata2: SATA link down (SStatus 0 SControl 300)
usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1.3: configuration #1 chosen from 1 choice
hub 2-1.3:1.0: USB hub found
hub 2-1.3:1.0: 2 ports detected
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
mpt2sas version 20.101.00.00 loaded
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mpt2sas 0000:05:00.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
mpt2sas 0000:05:00.0: setting latency timer to 64
mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (32838584 kB)
mpt2sas0: MSI-X vectors supported: 8, no of cores: 16, max_msix_vectors: 8
alloc irq_desc for 55 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mpt2sas 0000:05:00.0: irq 55 for MSI/MSI-X
alloc irq_desc for 56 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mpt2sas 0000:05:00.0: irq 56 for MSI/MSI-X
alloc irq_desc for 57 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mpt2sas 0000:05:00.0: irq 57 for MSI/MSI-X
alloc irq_desc for 58 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mpt2sas 0000:05:00.0: irq 58 for MSI/MSI-X
alloc irq_desc for 59 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mpt2sas 0000:05:00.0: irq 59 for MSI/MSI-X
alloc irq_desc for 60 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mpt2sas 0000:05:00.0: irq 60 for MSI/MSI-X
alloc irq_desc for 61 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mpt2sas 0000:05:00.0: irq 61 for MSI/MSI-X
alloc irq_desc for 62 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mpt2sas 0000:05:00.0: irq 62 for MSI/MSI-X
mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 55
mpt2sas0-msix1: PCI-MSI-X enabled: IRQ 56
mpt2sas0-msix2: PCI-MSI-X enabled: IRQ 57
mpt2sas0-msix3: PCI-MSI-X enabled: IRQ 58
mpt2sas0-msix4: PCI-MSI-X enabled: IRQ 59
mpt2sas0-msix5: PCI-MSI-X enabled: IRQ 60
mpt2sas0-msix6: PCI-MSI-X enabled: IRQ 61
mpt2sas0-msix7: PCI-MSI-X enabled: IRQ 62
mpt2sas0: iomem(0x00000000fbff0000), mapped(0xffffc90013f00000), size(65536)
mpt2sas0: ioport(0x0000000000006000), size(256)
mpt2sas0: sending message unit reset !!
mpt2sas0: message unit reset: SUCCESS
mpt2sas0: Allocated physical memory: size(16361 kB)
mpt2sas0: Current Controller Queue Depth(7931), Max Controller Queue Depth(8192)
mpt2sas0: Scatter Gather Elements per IO(128)
mpt2sas0: LSISAS2308: FWVersion(13.10.141.00), ChipRevision(0x01), BiosVersion(07.25.05.00)
mpt2sas0: HP H220i Host Bus Adapter
mpt2sas0: Protocol=(Initiator,Target), Capabilities=(TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
scsi6 : Fusion MPT SAS Host
mpt2sas0: sending port enable !!
mpt2sas0: host_add: handle(0x0001), sas_addr(0x500508b100200000), phys(8)
mpt2sas0: port enable: SUCCESS
scsi 6:0:0:0: Direct-Access ATA MM1000GBKAL HPGC PQ: 0 ANSI: 6
scsi 6:0:0:0: SATA: handle(0x000d), sas_addr(0x4433221100000000), phy(0), device_name(0x5000c500503ab467)
scsi 6:0:0:0: SATA: enclosure_logical_id(0x500508b100200000), slot(1)
scsi 6:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 6:0:0:0: qdepth(32), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
scsi 6:0:1:0: Direct-Access ATA MM1000GBKAL HPGC PQ: 0 ANSI: 6
scsi 6:0:1:0: SATA: handle(0x000e), sas_addr(0x4433221101000000), phy(1), device_name(0x5000c500502e2f70)
scsi 6:0:1:0: SATA: enclosure_logical_id(0x500508b100200000), slot(2)
scsi 6:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 6:0:1:0: qdepth(32), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
scsi 6:0:2:0: Direct-Access ATA MM1000GBKAL HPGC PQ: 0 ANSI: 6
scsi 6:0:2:0: SATA: handle(0x000f), sas_addr(0x4433221102000000), phy(2), device_name(0x5000c5005037e08e)
scsi 6:0:2:0: SATA: enclosure_logical_id(0x500508b100200000), slot(3)
scsi 6:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 6:0:2:0: qdepth(32), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
scsi 6:0:3:0: Direct-Access ATA MM1000GBKAL HPGC PQ: 0 ANSI: 6
scsi 6:0:3:0: SATA: handle(0x0010), sas_addr(0x4433221103000000), phy(3), device_name(0x5000c50050362f5d)
scsi 6:0:3:0: SATA: enclosure_logical_id(0x500508b100200000), slot(4)
scsi 6:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 6:0:3:0: qdepth(32), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
sd 6:0:1:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 6:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 6:0:3:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 6:0:2:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 6:0:2:0: [sdc] Write Protect is off
sd 6:0:2:0: [sdc] Mode Sense: 7f 00 00 08
sd 6:0:2:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:3:0: [sdd] Write Protect is off
sd 6:0:3:0: [sdd] Mode Sense: 7f 00 00 08
sd 6:0:3:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:1:0: [sdb] Write Protect is off
sd 6:0:1:0: [sdb] Mode Sense: 7f 00 00 08
sd 6:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sdb:
sdd: sdb1
sdd1
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 7f 00 00 08
sd 6:0:3:0: [sdd] Attached SCSI disk
sd 6:0:2:0: [sdc] Attached SCSI disk
sd 6:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:1:0: [sdb] Attached SCSI disk
sda: sda1 sda2
sd 6:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/sda2
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1440980014.440:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
dca service started, version 1.12.1
ioatdma: Intel(R) QuickData Technology Driver 4.00
alloc irq_desc for 31 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
ioatdma 0000:00:04.0: setting latency timer to 64
alloc irq_desc for 63 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.0: irq 63 for MSI/MSI-X
alloc irq_desc for 39 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.1: PCI INT B -> GSI 39 (level, low) -> IRQ 39
ioatdma 0000:00:04.1: setting latency timer to 64
alloc irq_desc for 64 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.1: irq 64 for MSI/MSI-X
ioatdma 0000:00:04.2: PCI INT C -> GSI 31 (level, low) -> IRQ 31
ioatdma 0000:00:04.2: setting latency timer to 64
alloc irq_desc for 65 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.2: irq 65 for MSI/MSI-X
ioatdma 0000:00:04.3: PCI INT D -> GSI 39 (level, low) -> IRQ 39
ioatdma 0000:00:04.3: setting latency timer to 64
alloc irq_desc for 66 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.3: irq 66 for MSI/MSI-X
ioatdma 0000:00:04.4: PCI INT A -> GSI 31 (level, low) -> IRQ 31
ioatdma 0000:00:04.4: setting latency timer to 64
alloc irq_desc for 67 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.4: irq 67 for MSI/MSI-X
ioatdma 0000:00:04.5: PCI INT B -> GSI 39 (level, low) -> IRQ 39
ioatdma 0000:00:04.5: setting latency timer to 64
alloc irq_desc for 68 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.5: irq 68 for MSI/MSI-X
ioatdma 0000:00:04.6: PCI INT C -> GSI 31 (level, low) -> IRQ 31
ioatdma 0000:00:04.6: setting latency timer to 64
alloc irq_desc for 69 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.6: irq 69 for MSI/MSI-X
ioatdma 0000:00:04.7: PCI INT D -> GSI 39 (level, low) -> IRQ 39
ioatdma 0000:00:04.7: setting latency timer to 64
alloc irq_desc for 70 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.7: irq 70 for MSI/MSI-X
ACPI Warning: SystemIO range 0x0000000000000928-0x000000000000092f conflicts with OpRegion 0x0000000000000920-0x000000000000092f (\SGPE) (20090903/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
igb: Copyright (c) 2007-2014 Intel Corporation.
igb 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
igb 0000:02:00.0: setting latency timer to 64
alloc irq_desc for 71 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.0: irq 71 for MSI/MSI-X
alloc irq_desc for 72 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.0: irq 72 for MSI/MSI-X
alloc irq_desc for 73 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.0: irq 73 for MSI/MSI-X
alloc irq_desc for 74 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.0: irq 74 for MSI/MSI-X
alloc irq_desc for 75 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.0: irq 75 for MSI/MSI-X
alloc irq_desc for 76 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.0: irq 76 for MSI/MSI-X
alloc irq_desc for 77 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.0: irq 77 for MSI/MSI-X
alloc irq_desc for 78 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.0: irq 78 for MSI/MSI-X
alloc irq_desc for 79 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.0: irq 79 for MSI/MSI-X
igb 0000:02:00.0: irq 71 for MSI/MSI-X
igb 0000:02:00.0: irq 72 for MSI/MSI-X
igb 0000:02:00.0: irq 73 for MSI/MSI-X
igb 0000:02:00.0: irq 74 for MSI/MSI-X
igb 0000:02:00.0: irq 75 for MSI/MSI-X
igb 0000:02:00.0: irq 76 for MSI/MSI-X
igb 0000:02:00.0: irq 77 for MSI/MSI-X
igb 0000:02:00.0: irq 78 for MSI/MSI-X
igb 0000:02:00.0: irq 79 for MSI/MSI-X
igb 0000:02:00.0: DCA enabled
igb 0000:02:00.0: added PHC on eth0
igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.0: eth0: (PCIe:5.0Gb/s:Width x4) c8:cb:b8:c5:ed:a0
igb 0000:02:00.0: eth0: PBA No: 0960FF-0FF
igb 0000:02:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
igb 0000:02:00.1: setting latency timer to 64
alloc irq_desc for 80 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.1: irq 80 for MSI/MSI-X
alloc irq_desc for 81 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.1: irq 81 for MSI/MSI-X
alloc irq_desc for 82 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.1: irq 82 for MSI/MSI-X
alloc irq_desc for 83 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.1: irq 83 for MSI/MSI-X
alloc irq_desc for 84 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.1: irq 84 for MSI/MSI-X
alloc irq_desc for 85 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.1: irq 85 for MSI/MSI-X
alloc irq_desc for 86 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.1: irq 86 for MSI/MSI-X
alloc irq_desc for 87 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.1: irq 87 for MSI/MSI-X
alloc irq_desc for 88 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:02:00.1: irq 88 for MSI/MSI-X
igb 0000:02:00.1: irq 80 for MSI/MSI-X
igb 0000:02:00.1: irq 81 for MSI/MSI-X
igb 0000:02:00.1: irq 82 for MSI/MSI-X
igb 0000:02:00.1: irq 83 for MSI/MSI-X
igb 0000:02:00.1: irq 84 for MSI/MSI-X
igb 0000:02:00.1: irq 85 for MSI/MSI-X
igb 0000:02:00.1: irq 86 for MSI/MSI-X
igb 0000:02:00.1: irq 87 for MSI/MSI-X
igb 0000:02:00.1: irq 88 for MSI/MSI-X
igb 0000:02:00.1: DCA enabled
igb 0000:02:00.1: added PHC on eth1
igb 0000:02:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.1: eth1: (PCIe:5.0Gb/s:Width x4) c8:cb:b8:c5:ed:a1
igb 0000:02:00.1: eth1: PBA No: 0960FF-0FF
igb 0000:02:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
hpwdt 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
hpwdt: New timer passed in is 30 seconds.
hpwdt 0000:01:00.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 0/OFF), priority: LAST (default = 0/LAST).
hpwdt 0000:01:00.0: HP Watchdog Timer Driver: 1.3.3-rh, timer margin: 30 seconds (nowayout=0).
hpilo 0000:01:00.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
hpilo 0000:01:00.2: setting latency timer to 64
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU8 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU9 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU10 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU12 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU13 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU14 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU15 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
Microcode Update Driver: v2.00 , Peter Oruba
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:03: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si 00:03: Found new BMC (man_id: 0x00000b, prod_id: 0x2100, dev_id: 0x13)
ipmi_si 00:03: IPMI kcs interface initialized
power_meter ACPI000D:00: Found ACPI power meter.
sd 6:0:0:0: Attached scsi generic sg0 type 0
sd 6:0:1:0: Attached scsi generic sg1 type 0
sd 6:0:2:0: Attached scsi generic sg2 type 0
sd 6:0:3:0: Attached scsi generic sg3 type 0
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
EXT4-fs (sdb1): barriers disabled
EXT4-fs (sdb1): mounted filesystem with writeback data mode. Opts:
EXT4-fs (sdc1): barriers disabled
EXT4-fs (sdc1): mounted filesystem with writeback data mode. Opts:
EXT4-fs (sdd1): barriers disabled
EXT4-fs (sdd1): mounted filesystem with writeback data mode. Opts:
igb 0000:02:00.0: eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
igb 0000:02:00.1: eth1: igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
type=1305 audit(1440994445.209:3): audit_pid=2153 old=0 auid=4294967295 ses=4294967295 res=1
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
8021q: adding VLAN 0 to HW filter on device eth0
8021q: adding VLAN 0 to HW filter on device eth1
[Firmware Warn]: ERST: Firmware does not respond in time