dmesg - Rudolf-Pentium4-GeforceFX5600-Xubuntu1404
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-62-generic (buildd@lgw01-35) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #102-Ubuntu SMP Tue Aug 11 14:28:35 UTC 2015 (Ubuntu 3.13.0-62.102-generic 3.13.11-ckt24)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable
BIOS-e820: [mem 0x000000003fff0000-0x000000003fff2fff] ACPI NVS
BIOS-e820: [mem 0x000000003fff3000-0x000000003fffffff] ACPI data
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection missing in CPU!
SMBIOS 2.3 present.
DMI: /875-Series, BIOS 6.00 PG 09/01/2004
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x3fff0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-F7FFF uncachable
F8000-FBFFF write-through
FC000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000f5820-0x000f582f] mapped at [c00f5820]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009a000] 9a000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
[mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01b9d000, 0x01b9dfff] PGTABLE
RAMDISK: [mem 0x35c1e000-0x36e06fff]
ACPI: RSDP 000f71d0 000014 (v00 IntelR)
ACPI: RSDT 3fff3000 00002C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 3fff3040 000074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 3fff30c0 0043A5 (v01 INTELR AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 3fff0000 000040
ACPI: APIC 3fff7480 000068 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
131MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
BRK [0x01b9e000, 0x01b9efff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x3ffeffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0x3ffeffff]
On node 0 totalpages: 262029
free_area_init_node: node 0, pgdat c19a3780, node_mem_map f73fe020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3997 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 224254 pages, LIFO batch:31
HighMem zone: 264 pages used for memmap
HighMem zone: 33778 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x40000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f73db000 s35520 r0 d21824 u57344
pcpu-alloc: s35520 r0 d21824 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260245
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 2097016 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0003fff0)
Memory: 1006624K/1048116K available (6559K kernel code, 645K rwdata, 2772K rodata, 880K init, 924K bss, 41492K reserved, 135112K highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc19c1000 - 0xc1a9d000 ( 880 kB)
.data : 0xc16680b4 - 0xc19c0640 (3425 kB)
.text : 0xc1000000 - 0xc16680b4 (6560 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f5808000 soft=f580a000
Console: colour dummy device 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 2624.404 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5248.80 BogoMIPS (lpj=10497616)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (c1a9d000 - c1aa5000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27884 entries in 55 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz (fam: 0f, model: 02, stepping: 09)
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version: 0
... bit width: 40
... generic registers: 18
... value mask: 000000ffffffffff
... max period: 0000007fffffffff
... fixed-purpose events: 0
... event mask: 000000000003ffff
CPU 1 irqstacks, hard=f58f4000 soft=f58f6000
x86: Booting SMP configuration:
Initializing CPU#1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (10498.20 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x3fff0000-0x3fff2fff] (12288 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 19:23:13, date: 08/23/15
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: PCI BIOS revision 2.10 entry at 0xfb1a0, last bus=3
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
PCI: root bus 00: using default resources
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [8086:2578] type 00 class 0x060000
pci 0000:00:00.0: Enabling MCH 'Overflow' Device
pci 0000:00:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:01.0: [8086:2579] type 01 class 0x060400
pci 0000:00:03.0: [8086:257b] type 01 class 0x060400
pci 0000:00:06.0: [8086:257e] type 00 class 0x088000
pci 0000:00:06.0: reg 0x10: [mem 0xe2300000-0xe2300fff]
pci 0000:00:1d.0: [8086:24d2] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xbc00-0xbc1f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:24d4] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xb000-0xb01f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:24d7] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xb400-0xb41f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:24de] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0xb800-0xb81f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:24dd] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xe2301000-0xe23013ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:24d0] type 00 class 0x060100
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: address space collision: [io 0x0400-0x047f] conflicts with ACPI PM1a_EVT_BLK [??? 0x00000400-0x00000403 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH4 GPIO
pci 0000:00:1f.2: [8086:24d1] type 00 class 0x01018a
pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:1f.3: [8086:24d3] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
pci 0000:01:00.0: [10de:0312] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xe0ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe1ffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
pci 0000:02:01.0: [8086:1019] type 00 class 0x020000
pci 0000:02:01.0: reg 0x10: [mem 0xe2000000-0xe201ffff]
pci 0000:02:01.0: reg 0x18: [io 0xa000-0xa01f]
pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
pci 0000:00:03.0: bridge window [mem 0xe2000000-0xe20fffff]
pci 0000:03:02.0: [109e:036e] type 00 class 0x040000
pci 0000:03:02.0: reg 0x10: [mem 0xe2200000-0xe2200fff pref]
pci 0000:03:02.1: [109e:0878] type 00 class 0x048000
pci 0000:03:02.1: reg 0x10: [mem 0xe2201000-0xe2201fff pref]
pci 0000:03:05.0: [1102:0007] type 00 class 0x040100
pci 0000:03:05.0: reg 0x10: [io 0x8000-0x801f]
pci 0000:03:05.0: supports D1 D2
pci 0000:03:06.0: [1186:1300] type 00 class 0x020000
pci 0000:03:06.0: reg 0x10: [io 0x8400-0x84ff]
pci 0000:03:06.0: reg 0x14: [mem 0xe2121000-0xe21210ff]
pci 0000:03:06.0: supports D1 D2
pci 0000:03:06.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:0a.0: [105a:3373] type 00 class 0x010400
pci 0000:03:0a.0: reg 0x10: [io 0x8800-0x883f]
pci 0000:03:0a.0: reg 0x14: [io 0x8c00-0x8c0f]
pci 0000:03:0a.0: reg 0x18: [io 0x9000-0x907f]
pci 0000:03:0a.0: reg 0x1c: [mem 0xe2120000-0xe2120fff]
pci 0000:03:0a.0: reg 0x20: [mem 0xe2100000-0xe211ffff]
pci 0000:03:0a.0: supports D1
pci 0000:03:0b.0: [1106:3044] type 00 class 0x0c0010
pci 0000:03:0b.0: reg 0x10: [mem 0xe2122000-0xe21227ff]
pci 0000:03:0b.0: reg 0x14: [io 0x9400-0x947f]
pci 0000:03:0b.0: supports D2
pci 0000:03:0b.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x8000-0x9fff]
pci 0000:00:1e.0: bridge window [mem 0xe2100000-0xe21fffff]
pci 0000:00:1e.0: bridge window [mem 0xe2200000-0xe22fffff pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x0b78-0x0b7b] has been reserved
system 00:00: [io 0x0f78-0x0f7b] has been reserved
system 00:00: [io 0x0a78-0x0a7b] has been reserved
system 00:00: [io 0x0e78-0x0e7b] has been reserved
system 00:00: [io 0x0bbc-0x0bbf] has been reserved
system 00:00: [io 0x0fbc-0x0fbf] has been reserved
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0294-0x0297] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
system 00:09: [io 0x0400-0x04bf] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
system 00:0b: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:0b: [mem 0x000db000-0x000dbfff] has been reserved
system 00:0b: [mem 0x000f0000-0x000fbfff] could not be reserved
system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0b: [mem 0x3fff0000-0x3fffffff] could not be reserved
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x00100000-0x3ffeffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfec01000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:01:00.0: BAR 6: assigned [mem 0xe1000000-0xe101ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe1ffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
pci 0000:00:03.0: bridge window [mem 0xe2000000-0xe20fffff]
pci 0000:00:1e.0: PCI bridge to [bus 03]
pci 0000:00:1e.0: bridge window [io 0x8000-0x9fff]
pci 0000:00:1e.0: bridge window [mem 0xe2100000-0xe21fffff]
pci 0000:00:1e.0: bridge window [mem 0xe2200000-0xe22fffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe1ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xe2000000-0xe20fffff]
pci_bus 0000:03: resource 0 [io 0x8000-0x9fff]
pci_bus 0000:03: resource 1 [mem 0xe2100000-0xe21fffff]
pci_bus 0000:03: resource 2 [mem 0xe2200000-0xe22fffff pref]
pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS mismatch (32 != 580), using 64 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18340K (f5c1e000 - f6e07000)
microcode: CPU0 sig=0xf29, pf=0x4, revision=0x21
microcode: CPU1 sig=0xf29, pf=0x4, revision=0x21
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1440357793.800:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1738
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xf8480000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (27 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel i875 Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xe2301000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-62-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bc00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-62-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-62-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-62-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-62-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 807921e456d366426ffd401f8cd73672ba8d4288'
registered taskstats version 1
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 11:579:395
rtc_cmos 00:02: setting system clock to 2015-08-23 19:23:14 UTC (1440357794)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata2.00: ATAPI: ATAPI iHAS524 B, AL2A, max UDMA/100
ata2.00: configured for UDMA/100
isapnp: No Plug & Play device found
scsi 1:0:0:0: CD-ROM ATAPI iHAS524 B AL2A PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 880K (c19c1000 - c1a9d000)
Write protecting the kernel text: 6564k
Write protecting the kernel read-only data: 2776k
systemd-udevd[99]: starting version 204
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
sata_promise 0000:03:0a.0: version 2.12
8139too: 8139too Fast Ethernet driver 0.9.28
scsi2 : sata_promise
scsi3 : sata_promise
scsi4 : sata_promise
ata3: SATA max UDMA/133 mmio m4096@0xe2120000 ata 0xe2120200 irq 22
ata4: SATA max UDMA/133 mmio m4096@0xe2120000 ata 0xe2120280 irq 22
ata5: PATA max UDMA/133 mmio m4096@0xe2120000 ata 0xe2120300 irq 22
8139too 0000:03:06.0 eth0: RealTek RTL8139 at 0x00018400, 00:11:95:61:af:6a, IRQ 20
firewire_ohci 0000:03:0b.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
input: GenPS/2 Genius Mouse as /devices/platform/i8042/serio1/input/input4
tsc: Refined TSC clocksource calibration: 2624.522 MHz
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-8: ST3750330AS, SD15, max UDMA/133
ata3.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3750330AS SD15 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
firewire_core 0000:03:0b.0: created device fw0: GUID 0030186600012204, S400
e1000 0000:02:01.0 eth1: (PCI:33MHz:32-bit) 00:30:18:00:30:14
e1000 0000:02:01.0 eth1: Intel(R) PRO/1000 Network Connection
ata4: SATA link down (SStatus 0 SControl 300)
Switched to clocksource tsc
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 97 bits of entropy available
random: nonblocking pool is initialized
Adding 1998844k swap on /dev/sda6. Priority:-1 extents:1 across:1998844k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
systemd-udevd[282]: starting version 204
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
EDAC i82875p: i82875p init one
EDAC MC0: Giving out device to module i82875p_edac controller i82875p: DEV 0000:00:00.0 (POLLED)
EDAC PCI0: Giving out device to module i82875p_edac controller EDAC PCI controller: DEV 0000:00:00.0 (POLLED)
intel_rng: FWH not detected
ACPI Warning: 0x000004b0-0x000004bf SystemIO conflicts with Region \GPO2 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \GPO_ 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
Linux video capture interface: v2.00
[drm] Initialized drm 1.1.0 20060810
type=1400 audit(1440350608.776:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=425 comm="apparmor_parser"
type=1400 audit(1440350608.776:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=425 comm="apparmor_parser"
type=1400 audit(1440350608.776:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=425 comm="apparmor_parser"
type=1400 audit(1440350608.776:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=425 comm="apparmor_parser"
type=1400 audit(1440350608.776:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=425 comm="apparmor_parser"
type=1400 audit(1440350608.776:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=425 comm="apparmor_parser"
type=1400 audit(1440350608.796:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=436 comm="apparmor_parser"
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1440350609.368:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=472 comm="apparmor_parser"
type=1400 audit(1440350609.368:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=472 comm="apparmor_parser"
type=1400 audit(1440350609.388:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=472 comm="apparmor_parser"
wmi: Mapper loaded
checking generic (d0000000 500000) vs hw (d0000000 10000000)
fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] hdmi device not found 1 0 1
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x031200a1
nouveau [ DEVICE][0000:01:00.0] Chipset: NV31 (NV31)
nouveau [ DEVICE][0000:01:00.0] Family : NV30
bttv: driver version 0.9.19 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0)
bttv: 0: Bt878 (rev 17) at 0000:03:02.0, irq: 17, latency: 32, mmio: 0xe2200000
nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:01:00.0] BMP version 5.28
nouveau [ VBIOS][0000:01:00.0] version 04.31.20.68.00
bttv: 0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
nouveau W[ PTIMER][0000:01:00.0] unknown input clock freq
nouveau [ PFB][0000:01:00.0] RAM type: DDR1
nouveau [ PFB][0000:01:00.0] RAM size: 256 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 262144 tags
tveeprom 1-0050: Huh, no eeprom present (err=-6)?
bttv: 0: tuner type unset
bttv: 0: registered device video0
bttv: 0: registered device vbi0
nouveau [ CLK][0000:01:00.0] --:
agpgart-intel 0000:00:00.0: AGP 3.0 bridge
agpgart: systemd-udevd tried to set rate=x12. Setting to AGP3 x8 mode.
agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[TTM] Zone kernel: Available graphics memory: 445382 kiB
[TTM] Zone highmem: Available graphics memory: 512938 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 255 MiB
nouveau [ DRM] GART: 256 MiB
nouveau [ DRM] BMP version 5.40
nouveau [ DRM] DCB version 2.2
nouveau [ DRM] DCB outp 00: 01000300 00009c40
nouveau [ DRM] DCB outp 01: 02010310 00009c40
nouveau [ DRM] DCB outp 02: 03010312 00000000
nouveau [ DRM] DCB outp 03: 02020321 00000003
nouveau [ DRM] Loading NV17 power sequencing microcode
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] 0xE3CB: Parsing digital output script table
nouveau [ DRM] MM: using M2MF for buffer copies
nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 3)
nouveau [ DRM] allocated 1680x1050 fb: 0x9000, bo f5967a00
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
snd-ca0106: Model 1012 Rev 00000000 Serial 10121102
init: failsafe main process (561) killed by TERM signal
e1000: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
8139too 0000:03:06.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth1 changing MTU from 1500 to 1492
e1000 0000:02:01.0 eth1: Reset adapter
audit_printk_skb: 3 callbacks suppressed
type=1400 audit(1440350616.420:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=895 comm="apparmor_parser"
type=1400 audit(1440350616.420:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=895 comm="apparmor_parser"
type=1400 audit(1440350616.420:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=895 comm="apparmor_parser"
type=1400 audit(1440350616.420:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=896 comm="apparmor_parser"
type=1400 audit(1440350616.424:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=896 comm="apparmor_parser"
type=1400 audit(1440350616.424:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=896 comm="apparmor_parser"
type=1400 audit(1440350616.424:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=896 comm="apparmor_parser"
type=1400 audit(1440350616.424:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=896 comm="apparmor_parser"
type=1400 audit(1440350616.424:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=896 comm="apparmor_parser"
type=1400 audit(1440350616.452:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=899 comm="apparmor_parser"
e1000: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1282) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
perf samples too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf samples too long (5035 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
perf samples too long (10067 > 10000), lowering kernel.perf_event_max_sample_rate to 12500