dmesg - vps1-aio
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-61-generic (buildd@lgw01-50) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #100-Ubuntu SMP Wed Jul 29 11:21:34 UTC 2015 (Ubuntu 3.13.0-61.100-generic 3.13.11-ckt22)
Command line: BOOT_IMAGE=/vmlinuz-3.13.0-61-generic root=/dev/mapper/vps1--vg-root ro quiet splash vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dfedffff] usable
BIOS-e820: [mem 0x00000000dfee0000-0x00000000dfee0fff] ACPI NVS
BIOS-e820: [mem 0x00000000dfee1000-0x00000000dfeeffff] ACPI data
BIOS-e820: [mem 0x00000000dfef0000-0x00000000dfefffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. X58A-UD3R/X58A-UD3R, BIOS FA 04/20/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CBFFF write-protect
CC000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0E0000000 mask FE0000000 uncachable
2 base 100000000 mask F00000000 write-back
3 base 200000000 mask FE0000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3584MB, range: 512MB, type UC
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 512MB, type WB
total RAM covered: 8192M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 512MB, type WB
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5e60-0x000f5e6f] mapped at [ffff8800000f5e60]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x21fe00000-0x21fffffff]
[mem 0x21fe00000-0x21fffffff] page 2M
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
init_memory_mapping: [mem 0x21c000000-0x21fdfffff]
[mem 0x21c000000-0x21fdfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21bffffff]
[mem 0x200000000-0x21bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdfedffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xdfdfffff] page 2M
[mem 0xdfe00000-0xdfedffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
RAMDISK: [mem 0x35980000-0x36cb7fff]
ACPI: RSDP 00000000000f7820 000014 (v00 GBT )
ACPI: RSDT 00000000dfee1040 000044 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000dfee10c0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000dfee1180 00596A (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 00000000dfee0000 000040
ACPI: HPET 00000000dfee6cc0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000dfee6d40 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: EUDS 00000000dfee6d80 0004D0 (v01 GBT 00000000 00000000)
ACPI: MATS 00000000dfee7250 000034 (v01 GBT 00000000 00000000)
ACPI: TAMG 00000000dfee72c0 000C7A (v01 GBT GBT B0 5455312E BG?? 53450101)
ACPI: APIC 00000000dfee6b40 00012C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 00000000dfee7f40 00290C (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
Initmem setup node 0 [mem 0x00000000-0x21fffffff]
NODE_DATA [mem 0x21fff5000-0x21fff9fff]
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217600000-ffff88021f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xdfedffff]
node 0: [mem 0x100000000-0x21fffffff]
On node 0 totalpages: 2096766
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 14268 pages used for memmap
DMA32 zone: 913120 pages, LIFO batch:31
Normal zone: 18432 pages used for memmap
Normal zone: 1179648 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdfee0000-0xdfee0fff]
PM: Registered nosave memory: [mem 0xdfee1000-0xdfeeffff]
PM: Registered nosave memory: [mem 0xdfef0000-0xdfefffff]
PM: Registered nosave memory: [mem 0xdff00000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xdff00000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88021fc00000 s81536 r8192 d20864 u131072
pcpu-alloc: s81536 r8192 d20864 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063981
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-61-generic root=/dev/mapper/vps1--vg-root ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8151868K/8387064K available (7394K kernel code, 1146K rwdata, 3416K rodata, 1336K init, 1448K bss, 235196K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-15.
NR_IRQS:16640 nr_irqs:808 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2833.667 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5667.33 BogoMIPS (lpj=11334668)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28586 entries in 112 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz (fam: 06, model: 1a, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (45338.67 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdfee0000-0xdfee0fff] (4096 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 7:54:02, date: 08/13/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0xC6, should be 0xC5 (20131115/tbprint-214)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xdff00000-0xfebfffff]
pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
pci 0000:00:11.0: [8086:3427] type 00 class 0x080000
pci 0000:00:11.1: [8086:3428] type 00 class 0x080000
pci 0000:00:13.0: [8086:342d] type 00 class 0x080020
pci 0000:00:13.0: reg 0x10: [mem 0xfbfff000-0xfbffffff]
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:15.0: [8086:342f] type 00 class 0x080020
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xff00-0xff1f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xfe00-0xfe1f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xfd00-0xfd1f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbff8000-0xfbffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xfc00-0xfc1f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xfb00-0xfb1f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xfa00-0xfa1f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfbffd000-0xfbffd3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: address space collision: [io 0x0400-0x047f] conflicts with ACPI PM1a_EVT_BLK [??? 0x00000400-0x00000403 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xf900-0xf907]
pci 0000:00:1f.2: reg 0x14: [io 0xf800-0xf803]
pci 0000:00:1f.2: reg 0x18: [io 0xf700-0xf707]
pci 0000:00:1f.2: reg 0x1c: [io 0xf600-0xf603]
pci 0000:00:1f.2: reg 0x20: [io 0xf500-0xf50f]
pci 0000:00:1f.2: reg 0x24: [io 0xf400-0xf40f]
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbffc000-0xfbffc0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xf200-0xf207]
pci 0000:00:1f.5: reg 0x14: [io 0xf100-0xf103]
pci 0000:00:1f.5: reg 0x18: [io 0xf000-0xf007]
pci 0000:00:1f.5: reg 0x1c: [io 0xef00-0xef03]
pci 0000:00:1f.5: reg 0x20: [io 0xee00-0xee0f]
pci 0000:00:1f.5: reg 0x24: [io 0xed00-0xed0f]
pci 0000:01:00.0: [1b4b:9128] type 00 class 0x010601
pci 0000:01:00.0: reg 0x10: [io 0xdf00-0xdf07]
pci 0000:01:00.0: reg 0x14: [io 0xde00-0xde03]
pci 0000:01:00.0: reg 0x18: [io 0xdd00-0xdd07]
pci 0000:01:00.0: reg 0x1c: [io 0xdc00-0xdc03]
pci 0000:01:00.0: reg 0x20: [io 0xdb00-0xdb0f]
pci 0000:01:00.0: reg 0x24: [mem 0xfb8ff000-0xfb8ff7ff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:00.0: PME# supported from D3hot
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfbafe000-0xfbafffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:03:00.0: [10de:0403] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xf8000000-0xf8ffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xf6000000-0xf7ffffff 64bit]
pci 0000:03:00.0: reg 0x24: [io 0x9f00-0x9f7f]
pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [197b:2363] type 00 class 0x010400
pci 0000:05:00.0: reg 0x24: [mem 0xfbefe000-0xfbefffff]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:05:00.1: [197b:2363] type 00 class 0x010185
pci 0000:05:00.1: reg 0x10: [io 0xcf00-0xcf07]
pci 0000:05:00.1: reg 0x14: [io 0xce00-0xce03]
pci 0000:05:00.1: reg 0x18: [io 0xcd00-0xcd07]
pci 0000:05:00.1: reg 0x1c: [io 0xcc00-0xcc03]
pci 0000:05:00.1: reg 0x20: [io 0xcb00-0xcb0f]
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 05]
pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:06:00.0: [197b:2363] type 00 class 0x010185
pci 0000:06:00.0: reg 0x24: [mem 0xfbdfe000-0xfbdfffff]
pci 0000:06:00.0: PME# supported from D3hot
pci 0000:06:00.1: [197b:2363] type 00 class 0x010185
pci 0000:06:00.1: reg 0x10: [io 0xbf00-0xbf07]
pci 0000:06:00.1: reg 0x14: [io 0xbe00-0xbe03]
pci 0000:06:00.1: reg 0x18: [io 0xbd00-0xbd07]
pci 0000:06:00.1: reg 0x1c: [io 0xbc00-0xbc03]
pci 0000:06:00.1: reg 0x20: [io 0xbb00-0xbb0f]
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: PCI bridge to [bus 06]
pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.3: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [io 0xae00-0xaeff]
pci 0000:07:00.0: reg 0x18: [mem 0xfbbff000-0xfbbfffff 64bit pref]
pci 0000:07:00.0: reg 0x20: [mem 0xfbbf8000-0xfbbfbfff 64bit pref]
pci 0000:07:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 07]
pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.4: bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref]
pci 0000:08:06.0: [104c:8024] type 00 class 0x0c0010
pci 0000:08:06.0: reg 0x10: [mem 0xfb9ff000-0xfb9ff7ff]
pci 0000:08:06.0: reg 0x14: [mem 0xfb9f8000-0xfb9fbfff]
pci 0000:08:06.0: supports D1 D2
pci 0000:08:06.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: setting as boot device: PCI:0000:03:00.0
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
pci 0000:3f:00.0: [8086:2c41] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:3f:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:3f:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:3f:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:3f:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:3f:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:3f:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:3f:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:3f:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:3f:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:3f:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:3f:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:3f:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:3f:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:3f:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:3f:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
e820: reserve RAM buffer [mem 0xdfee0000-0xdfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x0800-0x087f] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: [io 0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [dma 2]
pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
system 00:07: [io 0x0400-0x04cf] could not be reserved
system 00:07: [io 0x04d2-0x04ff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0x000d3000-0x000d3fff] has been reserved
system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:09: [mem 0xdfee0000-0xdfeeffff] could not be reserved
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x00100000-0xdfedffff] could not be reserved
system 00:09: [mem 0xdfef0000-0xdfefffff] has been reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
system 00:09: [mem 0x000e0000-0x000effff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:01.0: BAR 15: assigned [mem 0xdff00000-0xdfffffff pref]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf4000000-0xf41fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4200000-0xf43fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xf4400000-0xf45fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xf4600000-0xf47fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xdff00000-0xdff0ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:01.0: bridge window [mem 0xdff00000-0xdfffffff pref]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:03:00.0: BAR 6: assigned [mem 0xf9000000-0xf901ffff pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf41fffff]
pci 0000:00:1c.0: bridge window [mem 0xf4200000-0xf43fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 05]
pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.1: bridge window [mem 0xf4400000-0xf45fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 06]
pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.3: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.3: bridge window [mem 0xf4600000-0xf47fffff 64bit pref]
pci 0000:07:00.0: BAR 6: assigned [mem 0xfbb00000-0xfbb1ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 07]
pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.4: bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 08]
pci 0000:00:1e.0: bridge window [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfb800000-0xfb8fffff]
pci_bus 0000:01: resource 2 [mem 0xdff00000-0xdfffffff pref]
pci_bus 0000:02: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf9ffffff]
pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf41fffff]
pci_bus 0000:04: resource 2 [mem 0xf4200000-0xf43fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:05: resource 2 [mem 0xf4400000-0xf45fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:06: resource 2 [mem 0xf4600000-0xf47fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xa000-0xafff]
pci_bus 0000:07: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:07: resource 2 [mem 0xfbb00000-0xfbbfffff 64bit pref]
pci_bus 0000:08: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:08: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:08: resource 8 [mem 0xdff00000-0xfebfffff]
pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19680K (ffff880035980000 - ffff880036cb8000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdbee0000-0xdfee0000] (64MB) mapped at [ffff8800dbee0000-ffff8800dfedffff]
microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x11
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1439452442.528:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15960
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
ioapic: probe of 0000:00:13.0 failed with error -22
ioapic: probe of 0000:00:15.0 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf7000000, mapped to 0xffffc90004e80000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19
ata2: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf200 ctl 0xf100 bmdma 0xee00 irq 19
ata4: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xee08 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbffe000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-61-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffd000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-61-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-61-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-61-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-61-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.13.0-61-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.13.0-61-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.13.0-61-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 51 for MSI/MSI-X
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.13.0-61-generic xhci_hcd
usb usb9: SerialNumber: 0000:02:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10
usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.13.0-61-generic xhci_hcd
usb usb10: SerialNumber: 0000:02:00.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: b2626663385c770ec7e384a8909ccd47c2d200e1'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 11:619:925
rtc_cmos 00:03: setting system clock to 2015-08-13 07:54:03 UTC (1439452443)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1.00: SATA link down (SStatus 0 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3EA, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 1:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 788K (ffff88000173b000 - ffff880001800000)
Freeing unused kernel memory: 680K (ffff880001b56000 - ffff880001c00000)
systemd-udevd[173]: starting version 204
Floppy drive(s): fd0 is 1.44M
ahci 0000:01:00.0: version 3.0
ahci 0000:01:00.0: irq 52 for MSI/MSI-X
scsi4 : pata_jmicron
scsi5 : pata_jmicron
ata5: PATA max UDMA/100 cmd 0xcf00 ctl 0xce00 bmdma 0xcb00 irq 18
ata6: PATA max UDMA/100 cmd 0xcd00 ctl 0xcc00 bmdma 0xcb08 irq 18
pata_jmicron 0000:06:00.1: enabling device (0000 -> 0001)
scsi6 : pata_jmicron
scsi7 : pata_jmicron
ata7: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 16
ata8: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 16
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:07:00.0: irq 53 for MSI/MSI-X
r8169 0000:07:00.0 eth0: RTL8168e/8111e at 0xffffc90000c76000, 6c:f0:49:ed:f4:af, XID 0c100000 IRQ 53
r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:01:00.0: flags: 64bit ncq pio
scsi8 : ahci
scsi9 : ahci
scsi10 : ahci
scsi11 : ahci
scsi12 : ahci
scsi13 : ahci
scsi14 : ahci
scsi15 : ahci
ata9: SATA max UDMA/133 abar m2048@0xfb8ff000 port 0xfb8ff100 irq 52
ata10: SATA max UDMA/133 abar m2048@0xfb8ff000 port 0xfb8ff180 irq 52
ata11: SATA max UDMA/133 abar m2048@0xfb8ff000 port 0xfb8ff200 irq 52
ata12: SATA max UDMA/133 abar m2048@0xfb8ff000 port 0xfb8ff280 irq 52
ata13: SATA max UDMA/133 abar m2048@0xfb8ff000 port 0xfb8ff300 irq 52
ata14: SATA max UDMA/133 abar m2048@0xfb8ff000 port 0xfb8ff380 irq 52
ata15: SATA max UDMA/133 abar m2048@0xfb8ff000 port 0xfb8ff400 irq 52
ata16: SATA max UDMA/133 abar m2048@0xfb8ff000 port 0xfb8ff480 irq 52
FDC 0 is a post-1991 82077
ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi16 : ahci
scsi17 : ahci
ata17: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe100 irq 17
ata18: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe180 irq 17
ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi18 : ahci
scsi19 : ahci
ata19: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 19
ata20: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 19
firewire_ohci 0000:08:06.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
tsc: Refined TSC clocksource calibration: 2833.698 MHz
random: lvm urandom read with 28 bits of entropy available
bio: create slab at 1
ata14: SATA link down (SStatus 0 SControl 300)
ata13: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata15: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata16.00: configured for UDMA/66
ata10: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata17: SATA link down (SStatus 0 SControl 300)
ata18: SATA link down (SStatus 0 SControl 300)
ata19: SATA link down (SStatus 0 SControl 300)
ata20: SATA link down (SStatus 0 SControl 300)
EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
EXT4-fs (dm-0): write access will be enabled during recovery
scsi 15:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
scsi 15:0:0:0: Attached scsi generic sg1 type 3
firewire_core 0000:08:06.0: created device fw0: GUID 00ebb32f006cf049, S400
EXT4-fs (dm-0): orphan cleanup on readonly fs
EXT4-fs (dm-0): 1 orphan inode deleted
EXT4-fs (dm-0): recovery complete
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Switched to clocksource tsc
random: nonblocking pool is initialized
Adding 8388604k swap on /dev/mapper/vps1--vg-swap_1. Priority:-1 extents:1 across:8388604k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[400]: starting version 204
lp: driver loaded but no devices found
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
[drm] Initialized drm 1.1.0 20060810
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
MXM: GUID detected in BIOS
checking generic (f7000000 130000) vs hw (e0000000 10000000)
checking generic (f7000000 130000) vs hw (f6000000 2000000)
fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] hdmi device not found 3 0 1
nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x084300a2
nouveau [ DEVICE][0000:03:00.0] Chipset: G84 (NV84)
nouveau [ DEVICE][0000:03:00.0] Family : NV50
nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
SKU: Nid=0x1d sku_cfg=0x4005e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
dig-in=0x1f
realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
gpio_ich: GPIO from 195 to 255 on gpio_ich
nouveau [ VBIOS][0000:03:00.0] ... checksum invalid
nouveau [ VBIOS][0000:03:00.0] checking PROM for image...
type=1400 audit(1439452452.760:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=481 comm="apparmor_parser"
type=1400 audit(1439452452.760:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=481 comm="apparmor_parser"
type=1400 audit(1439452452.760:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=481 comm="apparmor_parser"
type=1400 audit(1439452452.760:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=455 comm="apparmor_parser"
type=1400 audit(1439452452.760:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=455 comm="apparmor_parser"
type=1400 audit(1439452452.760:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=455 comm="apparmor_parser"
type=1400 audit(1439452452.760:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=481 comm="apparmor_parser"
type=1400 audit(1439452452.760:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=481 comm="apparmor_parser"
type=1400 audit(1439452452.760:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=455 comm="apparmor_parser"
type=1400 audit(1439452452.760:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=455 comm="apparmor_parser"
nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
nouveau [ VBIOS][0000:03:00.0] using image from PROM
nouveau [ VBIOS][0000:03:00.0] BIT signature found
nouveau [ VBIOS][0000:03:00.0] version 60.84.43.00.18
nouveau 0000:03:00.0: irq 55 for MSI/MSI-X
nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
nouveau [ PFB][0000:03:00.0] RAM type: DDR2
nouveau [ PFB][0000:03:00.0] RAM size: 512 MiB
nouveau [ PFB][0000:03:00.0] ZCOMP: 1892 tags
nouveau [ VOLT][0000:03:00.0] GPU voltage: 1320000uv
nouveau [ PTHERM][0000:03:00.0] FAN control: PWM
nouveau [ PTHERM][0000:03:00.0] fan management: automatic
nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
nouveau [ CLK][0000:03:00.0] 20: core 540 MHz shader 1188 MHz memory 405 MHz
nouveau [ CLK][0000:03:00.0] --: core 540 MHz shader 1188 MHz memory 399 MHz
[TTM] Zone kernel: Available graphics memory: 4087192 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 512 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 04000310 00000028
nouveau [ DRM] DCB outp 01: 01011302 00020030
nouveau [ DRM] DCB outp 02: 02011300 00000028
nouveau [ DRM] DCB outp 03: 010223f1 00c0c083
nouveau [ DRM] DCB conn 00: 0000
nouveau [ DRM] DCB conn 01: 1130
nouveau [ DRM] DCB conn 02: 0210
nouveau [ DRM] DCB conn 03: 0211
nouveau [ DRM] DCB conn 04: 0213
nouveau W[ DRM] failed to create encoder 0/1/0: -19
nouveau W[ DRM] TV-1 has no encoders, removing
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] MM: using CRYPT for buffer copies
nouveau 0000:03:00.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
nouveau [ DRM] allocated 1024x768 fb: 0x70000, bo ffff88020f786c00
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:03:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.2 20120801 for 0000:03:00.0 on minor 0
r8169 0000:07:00.0 eth0: link down
r8169 0000:07:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
r8169 0000:07:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: failsafe main process (655) killed by TERM signal
init: plymouth-upstart-bridge main process ended, respawning
r8169 0000:07:00.0 eth0: link down
r8169 0000:07:00.0 eth0: link up
perf samples too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000