dmesg - ck-kernel
CPU0 microcode updated early to revision 0xd1, date = 2010-10-01
Initializing cgroup subsys cpuset
Linux version 4.0.9-2-ck (squishy@ease) (gcc version 5.2.0 (GCC) ) #1 SMP PREEMPT Fri Jul 24 16:08:56 EDT 2015
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007fe5ffff] usable
BIOS-e820: [mem 0x000000007fe60000-0x000000007fe72fff] ACPI data
BIOS-e820: [mem 0x000000007fe73000-0x000000007fefffff] ACPI NVS
BIOS-e820: [mem 0x000000007ff00000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: COMPAL HEL80C /HEL8X, BIOS 123B 08/24/2007
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x7fe60 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07FF00000 mask FFFF00000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
found SMP MP-table at [mem 0x000f81e0-0x000f81ef] mapped at [ffff8800000f81e0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01b19000, 0x01b19fff] PGTABLE
BRK [0x01b1a000, 0x01b1afff] PGTABLE
BRK [0x01b1b000, 0x01b1bfff] PGTABLE
init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[mem 0x7fc00000-0x7fdfffff] page 2M
BRK [0x01b1c000, 0x01b1cfff] PGTABLE
init_memory_mapping: [mem 0x60000000-0x7fbfffff]
[mem 0x60000000-0x7fbfffff] page 2M
init_memory_mapping: [mem 0x40000000-0x5fffffff]
[mem 0x40000000-0x5fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x3fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
init_memory_mapping: [mem 0x7fe00000-0x7fe5ffff]
[mem 0x7fe00000-0x7fe5ffff] page 4k
BRK [0x01b1d000, 0x01b1dfff] PGTABLE
RAMDISK: [mem 0x375a6000-0x37acafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F8150 000014 (v00 Compal)
ACPI: RSDT 0x000000007FE6C2BF 000058 (v01 Compal CALISTGA 06040000 LTP 00000000)
ACPI: FACP 0x000000007FE72C78 000074 (v01 Compal CALISTGA 06040000 LOHR 0000005A)
ACPI: DSDT 0x000000007FE6DFE6 004C92 (v01 Compal CALISTGA 06040000 INTL 20050624)
ACPI: FACS 0x000000007FE73FC0 000040
ACPI: APIC 0x000000007FE72CEC 000068 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: HPET 0x000000007FE72D54 000038 (v01 Compal CALISTGA 06040000 LOHR 0000005A)
ACPI: MCFG 0x000000007FE72D8C 00003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: TCPA 0x000000007FE72DC8 000032 (v01 COMPAL Phoenix 06040000 TL 00000000)
ACPI: SLIC 0x000000007FE72DFA 000176 (v01 Compal CALISTGA 06040000 TBD 00000001)
ACPI: APIC 0x000000007FE72F70 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 0x000000007FE72FD8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT 0x000000007FE6D997 00064F (v01 SataRe SataPri 00001000 INTL 20050624)
ACPI: SSDT 0x000000007FE6D305 000692 (v01 SataRe SataSec 00001000 INTL 20050624)
ACPI: SSDT 0x000000007FE6C889 00025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 0x000000007FE6C7E3 0000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
ACPI: SSDT 0x000000007FE6C317 0004CC (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007fe5ffff]
NODE_DATA(0) allocated [mem 0x7fe5c000-0x7fe5ffff]
[ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x000000007fe5ffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000007fe5ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007fe5ffff]
On node 0 totalpages: 523774
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 8122 pages used for memmap
DMA32 zone: 519776 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff88007fc00000 s83672 r8192 d31016 u1048576
pcpu-alloc: s83672 r8192 d31016 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 515567
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2045076K/2095096K available (5531K kernel code, 833K rwdata, 1776K rodata, 1156K init, 1148K bss, 50020K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:8448 nr_irqs:440 16
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 1994.993 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.98 BogoMIPS (lpj=1994993)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150204
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys bfqio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 20K (ffffffff819f3000 - ffffffff819f8000)
ftrace: allocating 21117 entries in 83 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (fam: 06, model: 0f, stepping: 06)
Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
CPU1 microcode updated early to revision 0xd1, date = 2010-10-01
CPU1: Thermal monitoring handled by SMI
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (7979.97 BogoMIPS)
BFS LOCALITY CPU 0 to 1: 2
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x7fe73000-0x7fefffff] (577536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 14:22:49, date: 08/02/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88007CA15000 000231 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88007C989800 0004B6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88007CA10900 0000B1 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88007CA109C0 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
pci 0000:00:01.0: [8086:27a1] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd2500000-0xd2503fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x1800-0x181f]
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x1820-0x183f]
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x1840-0x185f]
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0x1860-0x187f]
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xd2504000-0xd25043ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io 0x1000-0x107f]: address conflict with ACPI PM1a_EVT_BLK [io 0x1000-0x1003]
pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 007f)
pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 0x20: [io 0x18b0-0x18bf]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0x18c0-0x18df]
pci 0000:01:00.0: [10de:0398] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd1000000-0xd1ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd0ffffff 64bit]
pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd1ffffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [8086:4229] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xd2000000-0xd2001fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xd2000000-0xd20fffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:04:00.0: reg 0x18: [mem 0xd2200000-0xd2200fff 64bit]
pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0xd2200000-0xd22fffff]
acpiphp: Slot [1] registered
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0x0000-0x0fff]
pci 0000:00:1c.3: bridge window [mem 0x00000000-0x000fffff]
pci 0000:06:00.0: [1106:3044] type 00 class 0x0c0010
pci 0000:06:00.0: reg 0x10: [mem 0xd2100000-0xd21007ff]
pci 0000:06:00.0: reg 0x14: [io 0x4000-0x407f]
pci 0000:06:00.0: supports D2
pci 0000:06:00.0: PME# supported from D2 D3hot D3cold
pci 0000:06:04.0: [1524:1412] type 02 class 0x060700
pci 0000:06:04.0: reg 0x10: [mem 0xd2101000-0xd2101fff]
pci 0000:06:04.0: supports D1 D2
pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:04.1: [1524:0530] type 00 class 0x050100
pci 0000:06:04.1: reg 0x10: [mem 0xd2100800-0xd210087f]
pci 0000:06:04.1: supports D1 D2
pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.2: [1524:0550] type 00 class 0x080501
pci 0000:06:04.2: reg 0x10: [mem 0xd2100c00-0xd2100cff]
pci 0000:06:04.2: supports D1 D2
pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.4: [1524:0551] type 00 class 0x050100
pci 0000:06:04.4: reg 0x10: [mem 0x00000000-0x000000ff]
pci 0000:06:04.4: supports D1 D2
pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1e.0: bridge window [mem 0xd2100000-0xd21fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 06-07] (conflicts with (null) [bus 06-07])
pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 0a
pci_bus 0000:07: busn_res: can not insert [bus 07-0a] under [bus 06-07] (conflicts with (null) [bus 06-07])
pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07]
pci 0000:00:1e.0: bridge has subordinate 07 but max busn 0a
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: Enabled 9 GPEs in block 00 to 1F
ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0x7fe60000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [io 0xfe00-0xfe7f] has been reserved
system 00:00: [io 0xfe80-0xfeff] has been reserved
system 00:00: [io 0xff00-0xff7f] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
system 00:03: [io 0x0800-0x080f] has been reserved
system 00:03: [io 0x1000-0x107f] could not be reserved
system 00:03: [io 0x1180-0x11bf] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp: PnP ACPI: found 7 devices
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:1c.3: BAR 14: assigned [mem 0x80400000-0x805fffff]
pci 0000:00:1c.3: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:00:1c.3: BAR 13: assigned [io 0x6000-0x6fff]
pci 0000:01:00.0: BAR 6: no space for [mem size 0x00020000 pref]
pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd1ffffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xd2000000-0xd20fffff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xd2220000-0xd223ffff pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0xd2200000-0xd22fffff]
pci 0000:00:1c.2: bridge window [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.3: bridge window [mem 0x80400000-0x805fffff]
pci 0000:00:1c.3: bridge window [mem 0x80600000-0x807fffff 64bit pref]
pci 0000:06:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:06:04.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
pci 0000:06:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:06:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:06:04.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
pci 0000:06:04.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
pci 0000:06:04.0: BAR 13: assigned [io 0x4400-0x44ff]
pci 0000:06:04.0: BAR 14: assigned [io 0x4800-0x48ff]
pci 0000:06:04.4: BAR 0: assigned [mem 0xd2100900-0xd21009ff]
pci 0000:06:04.0: CardBus bridge to [bus 07-0a]
pci 0000:06:04.0: bridge window [io 0x4400-0x44ff]
pci 0000:06:04.0: bridge window [io 0x4800-0x48ff]
pci 0000:06:04.0: bridge window [mem 0x84000000-0x87ffffff pref]
pci 0000:06:04.0: bridge window [mem 0x88000000-0x8bffffff]
pci 0000:00:1e.0: PCI bridge to [bus 06-07]
pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1e.0: bridge window [mem 0xd2100000-0xd21fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x80000000-0xfebfffff window]
pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd1ffffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:02: resource 1 [mem 0xd2000000-0xd20fffff]
pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0xd2200000-0xd22fffff]
pci_bus 0000:04: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:05: resource 1 [mem 0x80400000-0x805fffff]
pci_bus 0000:05: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:06: resource 1 [mem 0xd2100000-0xd21fffff]
pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:06: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:06: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:06: resource 10 [mem 0x80000000-0xfebfffff window]
pci_bus 0000:06: resource 11 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:07: resource 0 [io 0x4400-0x44ff]
pci_bus 0000:07: resource 1 [io 0x4800-0x48ff]
pci_bus 0000:07: resource 2 [mem 0x84000000-0x87ffffff pref]
pci_bus 0000:07: resource 3 [mem 0x88000000-0x8bffffff]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS mismatch (64 != 32), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 5268K (ffff8800375a6000 - ffff880037acb000)
Simple Boot Flag at 0x36 set to 0x1
microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xd1
microcode: CPU1 sig=0x6f6, pf=0x20, revision=0xd1
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 512 (order: 3, 32768 bytes)
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
BFQ I/O-scheduler: v7r8
pcieport 0000:00:1c.3: enabling device (0000 -> 0003)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010400000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 15
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
registered taskstats version 1
Magic number: 11:468:383
rtc_cmos 00:04: setting system clock to 2015-08-02 14:22:50 UTC (1438525370)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1156K (ffffffff818d2000 - ffffffff819f3000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
Freeing unused kernel memory: 272K (ffff8800017bc000 - ffff880001800000)
BFS CPU scheduler v0.462 by Con Kolivas.
random: systemd-tmpfile urandom read with 5 bits of entropy available
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
ehci-pci: EHCI PCI platform driver
pci 0000:00:1e.0: enabling device (0004 -> 0007)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
SCSI subsystem initialized
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xd2504000
libata version 3.00 loaded.
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
firewire_ohci 0000:06:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1)
sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002)
sdhci-pci 0000:06:04.2: No vmmc regulator found
sdhci-pci 0000:06:04.2: No vqmmc regulator found
mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO
sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1)
sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002)
sdhci-pci 0000:06:04.4: No vmmc regulator found
sdhci-pci 0000:06:04.4: No vqmmc regulator found
mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
ata1.00: ATA-8: TOSHIBA MK3259GSXP, GN001U, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: ATAPI: MATSHITABD-MLT UJ-220S, 1.01, max UDMA/33
ata1.00: configured for UDMA/100
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3259GS 1U PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM MATSHITA BD-MLT UJ-220S 1.01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr 1:0:0:0: [sr0] scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
usb 1-1: new low-speed USB device number 2 using uhci_hcd
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
firewire_core 0000:06:00.0: created device fw0: GUID 00023f6b93400a2d, S400
tsc: Refined TSC clocksource calibration: 1995.021 MHz
usb 2-3: new high-speed USB device number 4 using ehci-pci
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CHICONY Compaq USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/0003:049F:0051.0001/input/input5
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 2 ports detected
hid-generic 0003:049F:0051.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY Compaq USB Keyboard] on usb-0000:00:1d.0-1/input0
input: CHICONY Compaq USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:049F:0051.0002/input/input6
hid-generic 0003:049F:0051.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [CHICONY Compaq USB Keyboard] on usb-0000:00:1d.0-1/input1
usb 2-4: new high-speed USB device number 5 using ehci-pci
usb 1-2: new full-speed USB device number 3 using uhci_hcd
random: nonblocking pool is initialized
usb 4-1: new low-speed USB device number 2 using uhci_hcd
input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/0003:09DA:000E.0003/input/input7
hid-generic 0003:09DA:000E.0003: input,hidraw2: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.2-1/input0
Switched to clocksource tsc
usb 4-2: new full-speed USB device number 3 using uhci_hcd
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
systemd[1]: systemd 222 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd-fstab-generator[143]: Mount point swap is not a valid path, ignoring.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Reached target Login Prompts.
systemd[1]: Starting Login Prompts.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting Remote File Systems.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting LVM2 metadata daemon socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Starting Device-mapper event daemon FIFOs.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Starting Set Up Additional Binary Formats...
systemd[1]: Started File System Check on Root Device.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Journal Service...
systemd[1]: Mounting Temporary Directory...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Debug File System...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 147 (systemd-binfmt)
systemd[1]: Mounting Arbitrary Executable File Formats File System...
media: Linux media interface: v0.10
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Temporary Directory.
systemd[1]: Mounted Arbitrary Executable File Formats File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Set Up Additional Binary Formats.
Linux video capture interface: v2.00
[drm] Initialized drm 1.1.0 20060810
EXT4-fs (sda1): re-mounted. Opts: data=ordered
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Started Rebuild Hardware Database.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Started First Boot Wizard.
systemd[1]: Started Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Started Rebuild Dynamic Linker Cache.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Starting Local File Systems (Pre).
systemd[1]: Mounted Virtual Machine and Container Storage.
systemd[1]: Started udev Kernel Device Manager.
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
tsc: Marking TSC unstable due to TSC halts in idle
Switched to clocksource hpet
ACPI: acpi_idle registered with cpuidle
systemd[1]: Started Setup Virtual Console.
systemd[1]: Starting Show Plymouth Boot Screen...
systemd[1]: Starting Setup keyboard layout...
systemd[1]: Started Journal Service.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input8
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input9
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input10
ACPI: Power Button [PWRF]
ACPI: Battery Slot [BAT1] (battery present)
tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16)
tpm_tis 00:01: [Hardware Error]: Adjusting reported timeouts: A 750->750000us B 2000->2000000us C 750->750000us D 750->750000us
tpm_tis 00:01: Adjusting TPM timeout parameters.
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
acpi device:02: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input11
systemd-journald[151]: Received request to flush runtime journal from PID 1
yenta_cardbus 0000:06:04.0: CardBus bridge found [14c0:0020]
yenta_cardbus 0000:06:04.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:06:04.0: TI: mfunc 0x88501212, devctl 0x44
ACPI: AC Adapter [ACAD] (on-line)
intel_rng: FWH not detected
sound hdaudioC0D0: autoconfig for ALC883: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x1e/0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Mic=0x18
yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0cf8, PCI irq 16
yenta_cardbus 0000:06:04.0: Socket status: 30000006
pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [io 0x4000-0x4fff]
yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0xd2100000-0xd21fffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xd2100000-0xd21fffff:
excluding 0xd2100000-0xd210ffff
ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\PMIO) (20150204/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20150204/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20150204/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
leds_ss4200: no LED devices found
ACPI Warning: SystemIO range 0x00000000000018C0-0x00000000000018DF conflicts with OpRegion 0x00000000000018C0-0x00000000000018CF (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0xffffc90000376000, 00:16:d4:60:f3:94, XID 18000000 IRQ 29
r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input12
psmouse serio4: elantech: assuming hardware version 1 (with firmware version 0x020004)
psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x02, 0x64.
EXT4-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input16
mousedev: PS/2 mouse device common for all mice
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
cfg80211: Calling CRDA to update world regulatory domain
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xcffff 0xdc000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
excluding 0x60000000-0x60ffffff
r8169 0000:04:00.0 enp4s0: renamed from eth0
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: unknown parameter 'NVreg_EnablePCIeGen3' ignored
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20140818 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.125 Mon Dec 1 19:58:28 PST 2014
gspca_main: v2.14.0 registered
Non-volatile memory driver v1.3
gspca_main: gspca_sn9c20x-2.14.0 probing 0c45:624f
iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
iwl4965: Copyright(c) 2003-2011 Intel Corporation
iwl4965 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
iwl4965 0000:02:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
iwl4965 0000:02:00.0: device EEPROM VER=0x36, CALIB=0x5
iwl4965 0000:02:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
iwl4965 0000:02:00.0: loaded firmware version 228.61.2.24
ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
iwl4965 0000:02:00.0 wlp2s0: renamed from wlan0
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
gspca_sn9c20x: OV9650 sensor detected
input: gspca_sn9c20x as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/input/input17
usbcore: registered new interface driver gspca_sn9c20x
gspca_sn9c20x 2-4:1.0: Unknown packet received
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
r8169 0000:04:00.0 enp4s0: link down
cfg80211: Calling CRDA to update world regulatory domain
wlp2s0: authenticate with 78:8d:f7:da:e0:38
wlp2s0: send auth to 78:8d:f7:da:e0:38 (try 1/3)
wlp2s0: send auth to 78:8d:f7:da:e0:38 (try 2/3)
wlp2s0: authenticated
wlp2s0: waiting for beacon from 78:8d:f7:da:e0:38
wlp2s0: associate with 78:8d:f7:da:e0:38 (try 1/3)
wlp2s0: associate with 78:8d:f7:da:e0:38 (try 2/3)
wlp2s0: RX AssocResp from 78:8d:f7:da:e0:38 (capab=0xc11 status=0 aid=4)
wlp2s0: associated
cfg80211: Calling CRDA to update world regulatory domain
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
fuse init (API version 7.23)
vboxdrv: Found 2 processor cores
vboxdrv: fAsync=0 offMin=0x3f0 offMax=0xa5c
vboxdrv: TSC mode is Synchronous, tentative frequency 1994983382 Hz
vboxdrv: Successfully loaded version 5.0.0_OSE (interface 0x00230001)
VBoxNetAdp: Successfully started.
VBoxNetFlt: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
Chrome_ChildThr[13257]: segfault at 0 ip 00007fde2fcfbfc4 sp 00007fde19c52520 error 6 in libmozalloc.so[7fde2fcfb000+2000]
input: 58:51:00:4C:E0:FC as /devices/virtual/input/input18
plugin-containe[18096]: segfault at 0 ip 00007f6d567e0fc4 sp 00007ffc1ac92cf0 error 6 in libmozalloc.so[7f6d567e0000+2000]
plugin-containe[23730]: segfault at 0 ip 00007f093993efc4 sp 00007ffde9117d30 error 6 in libmozalloc.so[7f093993e000+2000]
snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.