dmesg - java-scimark2_test_configuration
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-15-generic (buildd@komainu) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #15-Ubuntu SMP Thu Apr 16 23:32:37 UTC 2015 (Ubuntu 3.19.0-15.15-generic 3.19.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000bc7b8fff] usable
BIOS-e820: [mem 0x00000000bc7b9000-0x00000000bc968fff] reserved
BIOS-e820: [mem 0x00000000bc969000-0x00000000bc978fff] ACPI data
BIOS-e820: [mem 0x00000000bc979000-0x00000000bd7d5fff] ACPI NVS
BIOS-e820: [mem 0x00000000bd7d6000-0x00000000bed52fff] reserved
BIOS-e820: [mem 0x00000000bed53000-0x00000000beda7fff] type 20
BIOS-e820: [mem 0x00000000beda8000-0x00000000beda8fff] usable
BIOS-e820: [mem 0x00000000beda9000-0x00000000bedcbfff] ACPI NVS
BIOS-e820: [mem 0x00000000bedcc000-0x00000000bef1dfff] usable
BIOS-e820: [mem 0x00000000bef1e000-0x00000000bf5fcfff] reserved
BIOS-e820: [mem 0x00000000bf5fd000-0x00000000bf640fff] usable
BIOS-e820: [mem 0x00000000bf641000-0x00000000bfdf1fff] reserved
BIOS-e820: [mem 0x00000000bfdf2000-0x00000000bfdfffff] usable
BIOS-e820: [mem 0x00000000fe012000-0x00000000fe012fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec3ffff] reserved
BIOS-e820: [mem 0x00000000fecc0000-0x00000000fed7ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xbc96f000 ACPI 2.0=0xbc96f000 SMBIOS=0xf04c0 MPS=0xfd5f0
efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000008000-0x000000000005f000) (0MB)
efi: mem02: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000000005f000-0x0000000000060000) (0MB)
efi: mem03: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000060000-0x00000000000a0000) (0MB)
efi: mem04: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000800000) (7MB)
efi: mem05: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000000800000-0x0000000000900000) (1MB)
efi: mem06: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000900000-0x0000000001000000) (7MB)
efi: mem07: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000001000000-0x00000000024e6000) (20MB)
efi: mem08: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000024e6000-0x00000000345e2000) (800MB)
efi: mem09: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000345e2000-0x00000000362e9000) (29MB)
efi: mem10: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000362e9000-0x0000000080b90000) (1192MB)
efi: mem11: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000080b90000-0x00000000acb8c000) (703MB)
efi: mem12: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000acb8c000-0x00000000acb92000) (0MB)
efi: mem13: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000acb92000-0x00000000acd66000) (1MB)
efi: mem14: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000acd66000-0x00000000acd67000) (0MB)
efi: mem15: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000acd67000-0x00000000acd69000) (0MB)
efi: mem16: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x00000000acd69000-0x00000000ace8c000) (1MB)
efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ace8c000-0x00000000b0185000) (50MB)
efi: mem18: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0185000-0x00000000b07f6000) (6MB)
efi: mem19: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b07f6000-0x00000000b0948000) (1MB)
efi: mem20: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0948000-0x00000000b09ae000) (0MB)
efi: mem21: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b09ae000-0x00000000b09fb000) (0MB)
efi: mem22: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b09fb000-0x00000000b0b4d000) (1MB)
efi: mem23: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0b4d000-0x00000000b0b51000) (0MB)
efi: mem24: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0b51000-0x00000000b0b5d000) (0MB)
efi: mem25: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0b5d000-0x00000000b0b5e000) (0MB)
efi: mem26: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0b5e000-0x00000000bc1b9000) (182MB)
efi: mem27: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc1b9000-0x00000000bc477000) (2MB)
efi: mem28: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000bc477000-0x00000000bc481000) (0MB)
efi: mem29: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bc481000-0x00000000bc7b9000) (3MB)
efi: mem30: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000bc7b9000-0x00000000bc80f000) (0MB)
efi: mem31: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000bc80f000-0x00000000bc969000) (1MB)
efi: mem32: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc969000-0x00000000bc96f000) (0MB)
efi: mem33: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bc96f000-0x00000000bc979000) (0MB)
efi: mem34: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000bc979000-0x00000000bcc7b000) (3MB)
efi: mem35: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000bcc7b000-0x00000000bd7d6000) (11MB)
efi: mem36: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bd7d6000-0x00000000beab1000) (18MB)
efi: mem37: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000beab1000-0x00000000becc2000) (2MB)
efi: mem38: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000becc2000-0x00000000becc3000) (0MB)
efi: mem39: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000becc3000-0x00000000bed53000) (0MB)
efi: mem40: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bed53000-0x00000000bed64000) (0MB)
efi: mem41: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bed64000-0x00000000beda8000) (0MB)
efi: mem42: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000beda8000-0x00000000beda9000) (0MB)
efi: mem43: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000beda9000-0x00000000bedcc000) (0MB)
efi: mem44: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bedcc000-0x00000000bef1e000) (1MB)
efi: mem45: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bef1e000-0x00000000bf5fd000) (6MB)
efi: mem46: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bf5fd000-0x00000000bf61e000) (0MB)
efi: mem47: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bf61e000-0x00000000bf638000) (0MB)
efi: mem48: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bf638000-0x00000000bf639000) (0MB)
efi: mem49: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bf639000-0x00000000bf63b000) (0MB)
efi: mem50: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bf63b000-0x00000000bf641000) (0MB)
efi: mem51: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bf641000-0x00000000bfdf2000) (7MB)
efi: mem52: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bfdf2000-0x00000000bfe00000) (0MB)
efi: mem53: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x0000000140000000) (1024MB)
efi: mem54: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fe012000-0x00000000fe013000) (0MB)
efi: mem55: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec40000) (0MB)
efi: mem56: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fecc0000-0x00000000fed80000) (0MB)
efi: mem57: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fee00000-0x00000000fef00000) (1MB)
efi: mem58: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ff800000-0x0000000100000000) (8MB)
SMBIOS 2.7 present.
DMI: LENOVO FFFFFFFFFF/VT8611, BIOS O09KT11PUS 07/04/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BFE00000 mask FFFE00000 uncachable
3 base 100000000 mask FC0000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3070MB, range: 2MB, type UC
reg 3, base: 4GB, range: 1GB, type WB
total RAM covered: 4094M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3070MB, range: 2MB, type UC
reg 3, base: 4GB, range: 1GB, type WB
e820: update [mem 0xbfe00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbfe00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd890-0x000fd89f] mapped at [ffff8800000fd890]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[mem 0x13fe00000-0x13fffffff] page 2M
BRK [0x01fe8000, 0x01fe8fff] PGTABLE
init_memory_mapping: [mem 0x120000000-0x13fdfffff]
[mem 0x120000000-0x13fdfffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbc7b8fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbc5fffff] page 2M
[mem 0xbc600000-0xbc7b8fff] page 4k
init_memory_mapping: [mem 0xbeda8000-0xbeda8fff]
[mem 0xbeda8000-0xbeda8fff] page 4k
BRK [0x01fe9000, 0x01fe9fff] PGTABLE
init_memory_mapping: [mem 0xbedcc000-0xbef1dfff]
[mem 0xbedcc000-0xbef1dfff] page 4k
BRK [0x01fea000, 0x01feafff] PGTABLE
init_memory_mapping: [mem 0xbf5fd000-0xbf640fff]
[mem 0xbf5fd000-0xbf640fff] page 4k
init_memory_mapping: [mem 0xbfdf2000-0xbfdfffff]
[mem 0xbfdf2000-0xbfdfffff] page 4k
init_memory_mapping: [mem 0x100000000-0x11fffffff]
[mem 0x100000000-0x11fffffff] page 2M
RAMDISK: [mem 0x345e2000-0x362e8fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000BC96F000 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BC96F068 000054 (v01 LENOVO TC-03 00001110 AMI 00010013)
ACPI: FACP 0x00000000BC978660 00010C (v05 LENOVO TC-03 00001110 AMI 00010013)
ACPI: DSDT 0x00000000BC96F150 00950C (v02 LENOVO TC-03 00001110 INTL 20051117)
ACPI: FACS 0x00000000BD7CC080 000040
ACPI: FPDT 0x00000000BC978770 000044 (v01 LENOVO TC-03 00001110 AMI 00010013)
ACPI: MCFG 0x00000000BC9787B8 00003C (v01 LENOVO TC-03 00001110 MSFT 00000097)
ACPI: HPET 0x00000000BC9787F8 000038 (v01 LENOVO TC-03 00001110 AMI. 00000005)
ACPI: APIC 0x00000000BC978830 00006E (v03 LENOVO TC-03 00001110 AMI 00010013)
ACPI: BGRT 0x00000000BC9788A0 000038 (v00 LENOVO TC-03 00001110 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
NODE_DATA(0) allocated [mem 0x13fff5000-0x13fff9fff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009ffff]
node 0: [mem 0x00100000-0xbc7b8fff]
node 0: [mem 0xbeda8000-0xbeda8fff]
node 0: [mem 0xbedcc000-0xbef1dfff]
node 0: [mem 0xbf5fd000-0xbf640fff]
node 0: [mem 0xbfdf2000-0xbfdfffff]
node 0: [mem 0x100000000-0x13fffffff]
Initmem setup node 0 [mem 0x00001000-0x13fffffff]
On node 0 totalpages: 1034493
DMA zone: 64 pages used for memmap
DMA zone: 281 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 12006 pages used for memmap
DMA32 zone: 768350 pages, LIFO batch:31
Normal zone: 4096 pages used for memmap
Normal zone: 262144 pages, LIFO batch:31
Looks like a VIA chipset. Disabling IOMMU. Override with iommu=allowed
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 9, version 3, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 10, version 3, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbc7b9000-0xbc968fff]
PM: Registered nosave memory: [mem 0xbc969000-0xbc978fff]
PM: Registered nosave memory: [mem 0xbc979000-0xbd7d5fff]
PM: Registered nosave memory: [mem 0xbd7d6000-0xbed52fff]
PM: Registered nosave memory: [mem 0xbed53000-0xbeda7fff]
PM: Registered nosave memory: [mem 0xbeda9000-0xbedcbfff]
PM: Registered nosave memory: [mem 0xbef1e000-0xbf5fcfff]
PM: Registered nosave memory: [mem 0xbf641000-0xbfdf1fff]
PM: Registered nosave memory: [mem 0xbfe00000-0xfe011fff]
PM: Registered nosave memory: [mem 0xfe012000-0xfe012fff]
PM: Registered nosave memory: [mem 0xfe013000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec3ffff]
PM: Registered nosave memory: [mem 0xfec40000-0xfecbffff]
PM: Registered nosave memory: [mem 0xfecc0000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0xbfe00000-0xfe011fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88013fc00000 s87040 r8192 d31744 u1048576
pcpu-alloc: s87040 r8192 d31744 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1018046
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3758576K/4137972K available (7993K kernel code, 1232K rwdata, 3752K rodata, 1408K init, 1300K bss, 379396K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:16640 nr_irqs:512 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-1.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1733.372 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3466.74 BogoMIPS (lpj=6933488)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 0 MCE banks
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff81e96000 - ffffffff81e9e000)
Ignoring BGRT: invalid status 0 (expected 1)
ftrace: allocating 30078 entries in 118 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Centaur VIA Nano X2 C4350AL @ 1.6+ GHz (fam: 06, model: 0f, stepping: 0d)
Performance Events: no PMU driver, software events only.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
mce: CPU supports 0 MCE banks
NMI watchdog: disabled (cpu0): hardware events not enabled
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (6933.48 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbc979000-0xbd7d5fff] (15060992 bytes)
PM: Registering ACPI NVS region [mem 0xbeda9000-0xbedcbfff] (143360 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 9:11:51, date: 07/30/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Actual Package length (8) is larger than NumElements field (6), truncated
ACPI: Actual Package length (8) is larger than NumElements field (6), truncated
ACPI: Actual Package length (8) is larger than NumElements field (6), truncated
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1106:3456] type 00 class 0x060000
pci 0000:00:00.1: [1106:31b0] type 00 class 0x060000
pci 0000:00:00.2: [1106:31b1] type 00 class 0x060000
pci 0000:00:00.3: [1106:31b2] type 00 class 0x060000
pci 0000:00:00.4: [1106:31b3] type 00 class 0x060000
pci 0000:00:00.5: [1106:31b4] type 00 class 0x060000
pci 0000:00:00.6: [1106:31b5] type 00 class 0x060000
pci 0000:00:00.7: [1106:0709] type 00 class 0x060000
pci 0000:00:02.0: [1106:070a] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [1106:070b] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [1106:070e] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0f.0: [1106:9082] type 00 class 0x010601
pci 0000:00:0f.0: reg 0x20: [io 0xf0a0-0xf0bf]
pci 0000:00:0f.0: reg 0x24: [mem 0xfd206000-0xfd2063ff]
pci 0000:00:0f.0: PME# supported from D3hot
pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.0: reg 0x20: [io 0xf080-0xf09f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.1: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.2: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: System wakeup disabled by ACPI
pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.3: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: System wakeup disabled by ACPI
pci 0000:00:10.4: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: System wakeup disabled by ACPI
pci 0000:00:10.7: [1106:3104] type 00 class 0x0c0320
pci 0000:00:10.7: reg 0x10: [mem 0xfd205000-0xfd2050ff]
pci 0000:00:10.7: supports D1 D2
pci 0000:00:10.7: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.7: System wakeup disabled by ACPI
pci 0000:00:11.0: [1106:345b] type 00 class 0x060100
pci 0000:00:11.7: [1106:31b7] type 00 class 0x060000
pci 0000:00:12.0: [1106:9201] type 00 class 0x0c0330
pci 0000:00:12.0: reg 0x10: [mem 0xfd204000-0xfd204fff 64bit]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:13.0: [1106:31b8] type 01 class 0x060400
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [1106:3288] type 00 class 0x040300
pci 0000:00:14.0: reg 0x10: [mem 0xfd200000-0xfd203fff 64bit]
pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [1002:6778] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfd120000-0xfd13ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfd100000-0xfd11ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfd140000-0xfd143fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd100000-0xfd1fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfd000000-0xfd000fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xd1000000-0xd1003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfd000000-0xfd0fffff]
pci 0000:00:03.0: bridge window [mem 0xd1000000-0xd10fffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 03-04]
pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:06.0: bridge window [mem 0xfc000000-0xfcffffff]
pci 0000:00:06.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
pci 0000:00:13.0: PCI bridge to [bus 05]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 0F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0xbc7b9000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbeda9000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbef1e000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf641000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfe00000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: [mem 0xfecc0000-0xfed7ffff] could not be reserved
system 00:00: [mem 0xfe012000-0xfe012fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfed01000-0xfed010ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0a00-0x0a1f] has been reserved
system 00:02: [io 0x0a20-0x0a2f] has been reserved
system 00:02: [io 0x0a30-0x0a3f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 3]
pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x0400-0x041f] has been reserved
system 00:07: [mem 0xfec00000-0xfec3ffff] could not be reserved
system 00:07: [mem 0xff800000-0xffffffff] has been reserved
system 00:07: [mem 0xff800000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd100000-0xfd1fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfd000000-0xfd0fffff]
pci 0000:00:03.0: bridge window [mem 0xd1000000-0xd10fffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 03-04]
pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:06.0: bridge window [mem 0xfc000000-0xfcffffff]
pci 0000:00:06.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
pci 0000:00:13.0: PCI bridge to [bus 05]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfd100000-0xfd1fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfd000000-0xfd0fffff]
pci_bus 0000:02: resource 2 [mem 0xd1000000-0xd10fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfc000000-0xfcffffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: disabling DAC on VIA PCI bridge
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 29724K (ffff8800345e2000 - ffff8800362e9000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xac185000-0xb0185000] (64MB) mapped at [ffff8800ac185000-ffff8800b0184fff]
microcode: no support for this CPU vendor
Scanning for low memory corruption every 60 seconds
futex hash table entries: 512 (order: 3, 32768 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1438247512.272:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:06.0:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
pciehp 0000:00:06.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010780000, using 3904k, total 3904k
efifb: mode is 1152x864x32, linelength=4608, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 144x54
fb0: EFI VGA frame buffer device
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:12.0: xHCI Host Controller
xhci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:12.0: PCI: Disallowing DAC for device
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-15-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:12.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci_hcd 0000:00:12.0: xHCI Host Controller
xhci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-15-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:12.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:10.7: EHCI Host Controller
ehci-pci 0000:00:10.7: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:10.7: debug port 1
ehci-pci 0000:00:10.7: irq 23, io mem 0xfd205000
ehci-pci 0000:00:10.7: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-15-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:10.7
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 10 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.0: detected 2 ports
uhci_hcd 0000:00:10.0: irq 20, io base 0x0000f080
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.19.0-15-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:10.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.1: detected 2 ports
uhci_hcd 0000:00:10.1: irq 22, io base 0x0000f060
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.19.0-15-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:10.1
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:10.2: detected 2 ports
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000f040
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.19.0-15-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:10.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:10.3: detected 2 ports
uhci_hcd 0000:00:10.3: irq 23, io base 0x0000f020
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.19.0-15-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:10.3
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.4: UHCI Host Controller
uhci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:10.4: detected 2 ports
uhci_hcd 0000:00:10.4: irq 20, io base 0x0000f000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.19.0-15-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:10.4
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 9e64807092f3a6a8f66f3b7ea4cb3767fdfae08a'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 7:829:172
rtc_cmos 00:05: setting system clock to 2015-07-30 09:11:53 UTC (1438247513)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d36000 - ffffffff81e96000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 188K (ffff8800017d1000 - ffff880001800000)
Freeing unused kernel memory: 344K (ffff880001baa000 - ffff880001c00000)
random: systemd-udevd urandom read with 2 bits of entropy available
wmi: Mapper loaded
ahci 0000:00:0f.0: version 3.0
ahci 0000:00:0f.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:0f.0: PCI: Disallowing DAC for device
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI: Disallowing DAC for device
[drm] Initialized drm 1.1.0 20060810
r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc9001073a000, c0:3f:d5:7d:8b:68, XID 0c000800 IRQ 33
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:0f.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:0f.0: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc sxs boh
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m1024@0xfd206000 port 0xfd206100 irq 31
ata2: SATA max UDMA/133 abar m1024@0xfd206000 port 0xfd206180 irq 31
[drm] radeon kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (c0000000 3d0000) vs hw (c0000000 10000000)
fb: switching to radeondrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (CAICOS 0x1002:0x6778 0x1462:0xB497).
radeon 0000:01:00.0: PCI: Disallowing DAC for device
radeon: No suitable DMA available.
[drm] register mmio base: 0xFD120000
[drm] register mmio size: 131072
ATOM BIOS: C26411
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 1995708 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading CAICOS Microcode
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880035098c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880035098c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010cb2118
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
usb 6-1: new low-speed USB device number 2 using uhci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: ATA-9: SAMSUNG MZ7TD128HAFV-000L1, DXT05L0Q, max UDMA/133
ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7TD128 5L0Q PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 6-1: New USB device found, idVendor=17ef, idProduct=6019
usb 6-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 6-1: Product: Lenovo Optical USB Mouse
tsc: Refined TSC clocksource calibration: 1733.333 MHz
usb 6-2: new low-speed USB device number 3 using uhci_hcd
usb 6-2: New USB device found, idVendor=03f0, idProduct=0325
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: HP Basic USB Keyboard
usb 6-2: Manufacturer: Lite-On Technology Corp.
hidraw: raw HID events driver (C) Jiri Kosina
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] VGA-1
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Lenovo Optical USB Mouse as /devices/pci0000:00/0000:00:10.2/usb6/6-1/6-1:1.0/0003:17EF:6019.0001/input/input6
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVD-RAM GHB0N, JE00, max UDMA/133
hid-generic 0003:17EF:6019.0001: input,hidraw0: USB HID v1.11 Mouse [Lenovo Optical USB Mouse] on usb-0000:00:10.2-1/input0
input: Lite-On Technology Corp. HP Basic USB Keyboard as /devices/pci0000:00/0000:00:10.2/usb6/6-2/6-2:1.0/0003:03F0:0325.0002/input/input7
ata2.00: configured for UDMA/133
[drm] fb mappable at 0xC0475000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GHB0N JE00 PQ: 0 ANSI: 5
Console: switching to colour frame buffer device 240x67
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/8x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
[drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 0
hid-generic 0003:03F0:0325.0002: input,hidraw1: USB HID v1.10 Keyboard [Lite-On Technology Corp. HP Basic USB Keyboard] on usb-0000:00:10.2-2/input0
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Switched to clocksource tsc
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Starting fsck to fsckd communication Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Starting Nameserver information manager...
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Read required files in advance...
systemd[1]: Mounting Debug File System...
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Mounting POSIX Message Queue File System...
lp: driver loaded but no devices found
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
ppdev: user-space parallel port driver
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Nameserver information manager.
systemd[1]: Started udev Coldplug all Devices.
lp0: using parport0 (interrupt-driven).
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted Configuration File System.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting udev Wait for Complete Device Initialization...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Starting Show Plymouth Boot Screen...
systemd[1]: Started Journal Service.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
random: nonblocking pool is initialized
snd_hda_intel 0000:00:14.0: Force to non-snoop mode
snd_hda_intel 0000:00:14.0: PCI: Disallowing DAC for device
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: PCI: Disallowing DAC for device
sound hdaudioC0D0: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x1e/0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Line=0x1a
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
input: HDA VIA VT82xx Front Mic as /devices/pci0000:00/0000:00:14.0/sound/card0/input9
input: HDA VIA VT82xx Rear Mic as /devices/pci0000:00/0000:00:14.0/sound/card0/input10
input: HDA VIA VT82xx Line as /devices/pci0000:00/0000:00:14.0/sound/card0/input11
input: HDA VIA VT82xx Line Out Front as /devices/pci0000:00/0000:00:14.0/sound/card0/input12
input: HDA VIA VT82xx Line Out Surround as /devices/pci0000:00/0000:00:14.0/sound/card0/input13
input: HDA VIA VT82xx Line Out CLFE as /devices/pci0000:00/0000:00:14.0/sound/card0/input14
input: HDA VIA VT82xx Front Headphone as /devices/pci0000:00/0000:00:14.0/sound/card0/input15
VIA RNG detected
padlock_aes: Using VIA PadLock ACE for AES algorithm.
padlock_sha: Using VIA PadLock ACE for SHA1/SHA256 algorithms.
Adding 4137980k swap on /dev/sda3. Priority:-1 extents:1 across:4137980k SSFS
WARNING! power/level is deprecated; use power/control instead
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[279]: Received request to flush runtime journal from PID 1
audit: type=1400 audit(1438247521.369:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=471 comm="apparmor_parser"
audit: type=1400 audit(1438247521.369:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=471 comm="apparmor_parser"
audit: type=1400 audit(1438247521.369:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=471 comm="apparmor_parser"
audit: type=1400 audit(1438247521.369:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=471 comm="apparmor_parser"
audit: type=1400 audit(1438247521.381:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=471 comm="apparmor_parser"
audit: type=1400 audit(1438247521.381:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=471 comm="apparmor_parser"
audit: type=1400 audit(1438247521.381:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="pxgsettings" pid=471 comm="apparmor_parser"
audit: type=1400 audit(1438247521.381:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=471 comm="apparmor_parser"
audit: type=1400 audit(1438247521.381:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=471 comm="apparmor_parser"
audit: type=1400 audit(1438247521.385:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=471 comm="apparmor_parser"
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link up
swiotlb_tbl_map_single: 18 callbacks suppressed
ahci 0000:00:0f.0: swiotlb buffer is full (sz: 65536 bytes)
DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:00:0f.0
ahci 0000:00:0f.0: swiotlb buffer is full (sz: 65536 bytes)
DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:00:0f.0
ahci 0000:00:0f.0: swiotlb buffer is full (sz: 65536 bytes)
DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:00:0f.0
ata1.00: exception Emask 0x0 SAct 0x68000 SErr 0x0 action 0x0
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/c0:78:c0:ac:63/4f:00:01:00:00/40 tag 15 ncq 10452992 out
res 40/00:b8:40:cd:5c/00:00:01:00:00/40 Emask 0x40 (internal error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/80:88:00:48:64/4a:00:01:00:00/40 tag 17 ncq 9764864 out
res 40/00:b8:40:cd:5c/00:00:01:00:00/40 Emask 0x40 (internal error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/80:90:80:92:64/4a:00:01:00:00/40 tag 18 ncq 9764864 out
res 40/00:b8:40:cd:5c/00:00:01:00:00/40 Emask 0x40 (internal error)
ata1.00: status: { DRDY }
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
ata1: EH complete
ahci 0000:00:0f.0: swiotlb buffer is full (sz: 65536 bytes)
DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:00:0f.0
ata1.00: exception Emask 0x0 SAct 0x100000 SErr 0x0 action 0x0
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/08:a0:b8:20:65/4c:00:01:00:00/40 tag 20 ncq 9965568 out
res 40/00:a8:80:92:64/00:00:01:00:00/40 Emask 0x40 (internal error)
ata1.00: status: { DRDY }
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
ata1: EH complete
ahci 0000:00:0f.0: swiotlb buffer is full (sz: 65536 bytes)
DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:00:0f.0
ahci 0000:00:0f.0: swiotlb buffer is full (sz: 65536 bytes)
DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:00:0f.0
ata1.00: exception Emask 0x0 SAct 0x18000 SErr 0x0 action 0x0
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/c0:78:40:cd:72/4f:00:01:00:00/40 tag 15 ncq 10452992 out
res 40/00:a8:b8:20:65/00:00:01:00:00/40 Emask 0x40 (internal error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/38:80:00:1d:73/4e:00:01:00:00/40 tag 16 ncq 10252288 out
res 40/00:a8:b8:20:65/00:00:01:00:00/40 Emask 0x40 (internal error)
ata1.00: status: { DRDY }
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
ata1: EH complete
ahci 0000:00:0f.0: swiotlb buffer is full (sz: 65536 bytes)
DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:00:0f.0
ata1.00: exception Emask 0x0 SAct 0x10000000 SErr 0x0 action 0x0
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/80:e0:40:4d:76/4a:00:01:00:00/40 tag 28 ncq 9764864 out
res 40/00:38:80:3c:70/00:00:01:00:00/40 Emask 0x40 (internal error)
ata1.00: status: { DRDY }
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
ata1: EH complete
ahci 0000:00:0f.0: swiotlb buffer is full (sz: 65536 bytes)
DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:00:0f.0
ata1.00: exception Emask 0x0 SAct 0x80000 SErr 0x0 action 0x0
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/40:98:00:9d:a5/45:00:01:00:00/40 tag 19 ncq 9076736 out
res 40/00:68:40:e2:a3/00:00:01:00:00/40 Emask 0x40 (internal error)
ata1.00: status: { DRDY }
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
ata1: EH complete