dmesg - test2
Initializing cgroup subsys cpuset
Linux version 4.1.3-nrjQL-desktop-1omv (mockbuild@rosa2012.1-base) (gcc version 4.8.3 20140106 (OpenMandriva Association) (Linaro GCC 4.8-2014.01) ) #1 SMP PREEMPT Wed Jul 22 17:44:23 UTC 2015
Command line: BOOT_IMAGE=/boot/vmlinuz-4.1.3-nrjQL-desktop-1omv root=/dev/sda1 ro quiet audit=0 splash=silent logo.nologo acpi_osi=Linux video.use_native_backlight=1 radeon.dpm=1 vconsole.keymap=it-latin1 locale.lang=en_GB.UTF-8
tseg: 007ff00000
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007faa8fff] usable
BIOS-e820: [mem 0x000000007faa9000-0x000000007faf1fff] ACPI NVS
BIOS-e820: [mem 0x000000007faf2000-0x000000007fafcfff] ACPI data
BIOS-e820: [mem 0x000000007fafd000-0x000000007fafffff] ACPI NVS
BIOS-e820: [mem 0x000000007fb00000-0x000000007fb00fff] usable
BIOS-e820: [mem 0x000000007fb01000-0x000000007fb04fff] reserved
BIOS-e820: [mem 0x000000007fb05000-0x000000007fb13fff] ACPI NVS
BIOS-e820: [mem 0x000000007fb14000-0x000000007fb33fff] reserved
BIOS-e820: [mem 0x000000007fb34000-0x000000007fb34fff] usable
BIOS-e820: [mem 0x000000007fb35000-0x000000007fb45fff] reserved
BIOS-e820: [mem 0x000000007fb46000-0x000000007fb4dfff] ACPI NVS
BIOS-e820: [mem 0x000000007fb4e000-0x000000007fb74fff] reserved
BIOS-e820: [mem 0x000000007fb75000-0x000000007fd77fff] ACPI NVS
BIOS-e820: [mem 0x000000007fd78000-0x000000007fefffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x00000001deffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: SAMSUNG ELECTRONICS CO., LTD. 305V4A/305V5A/305V4A/305V4A, BIOS 04PW.ME99.20110908.SKK 09/08/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x1df000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CEFFF write-protect
CF000-DFFFF uncachable
E0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 007FF00000 mask FFFFF00000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 00000001df000000 aka 7664M
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: update [mem 0x7ff00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7ff00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd010-0x000fd01f] mapped at [ffff8800000fd010]
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01f3e000, 0x01f3efff] PGTABLE
BRK [0x01f3f000, 0x01f3ffff] PGTABLE
BRK [0x01f40000, 0x01f40fff] PGTABLE
init_memory_mapping: [mem 0x1dee00000-0x1deffffff]
[mem 0x1dee00000-0x1deffffff] page 2M
BRK [0x01f41000, 0x01f41fff] PGTABLE
init_memory_mapping: [mem 0x1c0000000-0x1dedfffff]
[mem 0x1c0000000-0x1dedfffff] page 2M
init_memory_mapping: [mem 0x1a0000000-0x1bfffffff]
[mem 0x1a0000000-0x1bfffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x7faa8fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7f9fffff] page 2M
[mem 0x7fa00000-0x7faa8fff] page 4k
init_memory_mapping: [mem 0x7fb00000-0x7fb00fff]
[mem 0x7fb00000-0x7fb00fff] page 4k
init_memory_mapping: [mem 0x7fb34000-0x7fb34fff]
[mem 0x7fb34000-0x7fb34fff] page 4k
init_memory_mapping: [mem 0x7fd78000-0x7fefffff]
[mem 0x7fd78000-0x7fefffff] page 4k
BRK [0x01f42000, 0x01f42fff] PGTABLE
BRK [0x01f43000, 0x01f43fff] PGTABLE
init_memory_mapping: [mem 0x100001000-0x19fffffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x19fffffff] page 1G
RAMDISK: [mem 0x338c2000-0x35c58fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0450 000024 (v02 SECCSD)
ACPI: XSDT 0x000000007FAF2070 00005C (v01 SECCSD LH43STAR 01072009 AMI 00010013)
ACPI: FACP 0x000000007FAFA070 0000F4 (v04 SECCSD LH43STAR 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150410/tbfadt-649)
ACPI: DSDT 0x000000007FAF2158 007F17 (v02 SECCSD LH43STAR 00000000 INTL 20051117)
ACPI: FACS 0x000000007FB48F80 000040
ACPI: APIC 0x000000007FAFA168 000072 (v03 SECCSD LH43STAR 01072009 AMI 00010013)
ACPI: MCFG 0x000000007FAFA1E0 00003C (v01 A M I GMCH945. 01072009 MSFT 00000097)
ACPI: SLIC 0x000000007FAFA220 000176 (v01 SECCSD LH43STAR 01072009 AMI 00010013)
ACPI: HPET 0x000000007FAFA398 000038 (v01 SECCSD LH43STAR 01072009 AMI 00000004)
ACPI: SSDT 0x000000007FAFA3D0 000E34 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: SSDT 0x000000007FAFB208 00190A (v02 AMD ALIB 00000001 MSFT 04000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001deffffff]
NODE_DATA(0) allocated [mem 0x1deff7000-0x1deffbfff]
[ffffea0000000000-ffffea00077fffff] PMD -> [ffff8801d8e00000-ffff8801de5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000001deffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x000000007faa8fff]
node 0: [mem 0x000000007fb00000-0x000000007fb00fff]
node 0: [mem 0x000000007fb34000-0x000000007fb34fff]
node 0: [mem 0x000000007fd78000-0x000000007fefffff]
node 0: [mem 0x0000000100001000-0x00000001deffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000001deffffff]
On node 0 totalpages: 1436623
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 8113 pages used for memmap
DMA32 zone: 519219 pages, LIFO batch:31
Normal zone: 14272 pages used for memmap
Normal zone: 913407 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7faa9000-0x7faf1fff]
PM: Registered nosave memory: [mem 0x7faf2000-0x7fafcfff]
PM: Registered nosave memory: [mem 0x7fafd000-0x7fafffff]
PM: Registered nosave memory: [mem 0x7fb01000-0x7fb04fff]
PM: Registered nosave memory: [mem 0x7fb05000-0x7fb13fff]
PM: Registered nosave memory: [mem 0x7fb14000-0x7fb33fff]
PM: Registered nosave memory: [mem 0x7fb35000-0x7fb45fff]
PM: Registered nosave memory: [mem 0x7fb46000-0x7fb4dfff]
PM: Registered nosave memory: [mem 0x7fb4e000-0x7fb74fff]
PM: Registered nosave memory: [mem 0x7fb75000-0x7fd77fff]
PM: Registered nosave memory: [mem 0x7ff00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0x7ff00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff8801dec00000 s96344 r8192 d30632 u524288
pcpu-alloc: s96344 r8192 d30632 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1414153
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.1.3-nrjQL-desktop-1omv root=/dev/sda1 ro quiet audit=0 splash=silent logo.nologo acpi_osi=Linux video.use_native_backlight=1 radeon.dpm=1 vconsole.keymap=it-latin1 locale.lang=en_GB.UTF-8
audit: disabled (until reboot)
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 5537352K/5746492K available (7230K kernel code, 1127K rwdata, 3440K rodata, 1332K init, 820K bss, 209140K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
RCU kthread priority: 1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:4352 nr_irqs:456 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1796.614 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3593.22 BogoMIPS (lpj=1796614)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150410
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
TOMOYO Linux initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys bfqio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 1024, 2MB 128, 4MB 64, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff81e68000 - ffffffff81e6e000)
ftrace: allocating 26571 entries in 104 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A8-3510MX APU with Radeon(tm) HD Graphics (fam: 12, model: 01, stepping: 00)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
MCE: In-kernel MCE decoding enabled.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
Renew affinity for 11 processes to cpu 1
#2
Renew affinity for 10 processes to cpu 2
#3
Renew affinity for 10 processes to cpu 3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (14372.91 BogoMIPS)
BFS LOCALITY CPU 0 to 1: 2
BFS LOCALITY CPU 0 to 2: 2
BFS LOCALITY CPU 0 to 3: 2
BFS LOCALITY CPU 1 to 2: 2
BFS LOCALITY CPU 1 to 3: 2
BFS LOCALITY CPU 2 to 3: 2
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x7faa9000-0x7faf1fff] (299008 bytes)
PM: Registering ACPI NVS region [mem 0x7fafd000-0x7fafffff] (12288 bytes)
PM: Registering ACPI NVS region [mem 0x7fb05000-0x7fb13fff] (61440 bytes)
PM: Registering ACPI NVS region [mem 0x7fb46000-0x7fb4dfff] (32768 bytes)
PM: Registering ACPI NVS region [mem 0x7fb75000-0x7fd77fff] (2109440 bytes)
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
xor: automatically using best checksumming function:
prefetch64-sse: 8220.000 MB/sec
pinctrl core: initialized pinctrl subsystem
RTC time: 10:40:48, date: 07/27/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
raid6: sse2x1 gen() 2984 MB/s
raid6: sse2x1 xor() 3337 MB/s
raid6: sse2x2 gen() 4335 MB/s
raid6: sse2x2 xor() 4693 MB/s
raid6: sse2x4 gen() 5121 MB/s
raid6: sse2x4 xor() 2857 MB/s
raid6: using algorithm sse2x4 gen() 5121 MB/s
raid6: .... xor() 2857 MB/s, rmw enabled
raid6: using intx1 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x1778-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xa0000000-0xffffffff window]
pci 0000:00:00.0: [1022:1705] type 00 class 0x060000
pci 0000:00:01.0: [1002:9641] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xa0000000-0xafffffff pref]
pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:1714] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:1707] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [1022:1708] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1709] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb50000-0xfeb507ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb4f000-0xfeb4ffff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb4e000-0xfeb4e0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb4d000-0xfeb4dfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb4c000-0xfeb4c0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb4b000-0xfeb4bfff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:14.7: [1022:7806] type 00 class 0x080501
pci 0000:00:14.7: reg 0x10: [mem 0xfeb4a000-0xfeb4a0ff 64bit]
pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.2: System wakeup disabled by ACPI
pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfeb49000-0xfeb49fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfeb48000-0xfeb480ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [1002:6760] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:02:00.0: reg 0x18: [mem 0xfea20000-0xfea3ffff 64bit]
pci 0000:02:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:03.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 03]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x1778-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xa0000000-0xffffffff window] (subtractive decode)
pci 0000:05:00.0: [168c:002b] type 00 class 0x028000
pci 0000:05:00.0: reg 0x10: [mem 0xfe900000-0xfe90ffff 64bit]
pci 0000:05:00.0: supports D1
pci 0000:05:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:15.2: PCI bridge to [bus 06-08]
pci 0000:00:15.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:15.2: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:15.2: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
ACPI: PCI Interrupt Link [LN24] (IRQs *24)
ACPI: PCI Interrupt Link [LN25] (IRQs *25)
ACPI: PCI Interrupt Link [LN26] (IRQs *26)
ACPI: PCI Interrupt Link [LN27] (IRQs *27)
ACPI: PCI Interrupt Link [LN28] (IRQs *28)
ACPI: PCI Interrupt Link [LN29] (IRQs *29)
ACPI: PCI Interrupt Link [LN30] (IRQs *30)
ACPI: PCI Interrupt Link [LN31] (IRQs *31)
ACPI: PCI Interrupt Link [LN32] (IRQs *32)
ACPI: PCI Interrupt Link [LN33] (IRQs *33)
ACPI: PCI Interrupt Link [LN34] (IRQs *34)
ACPI: PCI Interrupt Link [LN35] (IRQs *35)
ACPI: PCI Interrupt Link [LN36] (IRQs *36)
ACPI: PCI Interrupt Link [LN37] (IRQs *37)
ACPI: PCI Interrupt Link [LN38] (IRQs *38)
ACPI: PCI Interrupt Link [LN39] (IRQs *39)
ACPI: PCI Interrupt Link [LN40] (IRQs *40)
ACPI: PCI Interrupt Link [LN41] (IRQs *41)
ACPI: PCI Interrupt Link [LN42] (IRQs *42)
ACPI: PCI Interrupt Link [LN43] (IRQs *43)
ACPI: PCI Interrupt Link [LN44] (IRQs *44)
ACPI: PCI Interrupt Link [LN45] (IRQs *45)
ACPI: PCI Interrupt Link [LN46] (IRQs *46)
ACPI: PCI Interrupt Link [LN47] (IRQs *47)
ACPI: PCI Interrupt Link [LN48] (IRQs *48)
ACPI: PCI Interrupt Link [LN49] (IRQs *49)
ACPI: PCI Interrupt Link [LN50] (IRQs *50)
ACPI: PCI Interrupt Link [LN51] (IRQs *51)
ACPI: PCI Interrupt Link [LN52] (IRQs *52)
ACPI: PCI Interrupt Link [LN53] (IRQs *53)
ACPI: PCI Interrupt Link [LN54] (IRQs *54)
ACPI: PCI Interrupt Link [LN55] (IRQs *55)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
ACPI : EC: 0 stale EC events cleared
vgaarb: setting as boot device: PCI:0000:00:01.0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
vgaarb: no bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7faa9000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7fb01000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7fb35000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7ff00000-0x7fffffff]
e820: reserve RAM buffer [mem 0x1df000000-0x1dfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x040b] has been reserved
system 00:02: [io 0x04d6] has been reserved
system 00:02: [io 0x0c00-0x0c01] has been reserved
system 00:02: [io 0x0c14] has been reserved
system 00:02: [io 0x0c50-0x0c51] has been reserved
system 00:02: [io 0x0c52] has been reserved
system 00:02: [io 0x0c6c] has been reserved
system 00:02: [io 0x0c6f] has been reserved
system 00:02: [io 0x0cd0-0x0cd1] has been reserved
system 00:02: [io 0x0cd2-0x0cd3] has been reserved
system 00:02: [io 0x0cd4-0x0cd5] has been reserved
system 00:02: [io 0x0cd6-0x0cd7] has been reserved
system 00:02: [io 0x0cd8-0x0cdf] has been reserved
system 00:02: [io 0x0800-0x089f] could not be reserved
system 00:02: [io 0x0b20-0x0b3f] has been reserved
system 00:02: [io 0x0900-0x090f] has been reserved
system 00:02: [io 0x0910-0x091f] has been reserved
system 00:02: [io 0xfe00-0xfefe] has been reserved
system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:02: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:02: [mem 0xff000000-0xffffffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x1770-0x1777] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:07: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
pnp: PnP ACPI: found 8 devices
clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:02.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:02.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:02.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:02.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:02.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:02.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:02.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
pci 0000:00:02.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
pci 0000:00:02.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.0: bridge window [mem 0xd0100000-0xd02fffff]
pci 0000:00:02.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:03.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 03]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 04]
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:15.2: PCI bridge to [bus 06-08]
pci 0000:00:15.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:15.2: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:15.2: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x1778-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xa0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:02: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:04: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:04: resource 7 [io 0x1778-0xffff window]
pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:04: resource 10 [mem 0xa0000000-0xffffffff window]
pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:06: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:06: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 36444K (ffff8800338c2000 - ffff880035c59000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x7baa9000-0x7faa9000] (64MB) mapped at [ffff88007baa9000-ffff88007faa8fff]
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
futex hash table entries: 1024 (order: 4, 65536 bytes)
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
BFQ I/O-scheduler: v7r8
pcieport 0000:00:15.2: enabling device (0006 -> 0007)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xa0000000, mapped to 0xffffc90001000000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50100 irq 24
ata2: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50180 irq 24
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50380 irq 24
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
Key type dns_resolver registered
mpls_gso: MPLS GSO support
TuxOnIce 3.3 ()
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
UKSM: relative memcmp_cost = 163 hash=1617587279 cmp_ret=0.
Btrfs loaded
Magic number: 7:228:680
rtc_cmos 00:03: setting system clock to 2015-07-27 10:40:53 UTC (1437993653)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Scanning swap devices for TuxOnIce signature...
TuxOnIce scan: No image found.
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: ATA-9: Samsung SSD 840 Series, DXT06B0Q, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: failed to get Identify Device Data, Emask 0x1
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: failed to get Identify Device Data, Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 5
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: Enabling discard_zeroes_data
sda: sda1 sda2 < sda5 sda6 >
ata2.00: ATAPI: SlimtypeDVD A DS8A5SH, XS21, max UDMA/100
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A5SH XS21 PQ: 0 ANSI: 5
psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x350f00)
psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
tsc: Refined TSC clocksource calibration: 1796.732 MHz
clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x19e61a4d4b1, max_idle_ns: 440795220284 ns
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input2
Scanning swap devices for TuxOnIce signature...
- Trying 8:5.
TuxOnIce scan: No image found.
TuxOnIce: No image found.
PM: Checking hibernation image partition 8:5
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1b000 - ffffffff81e68000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 952K (ffff880001712000 - ffff880001800000)
Freeing unused kernel memory: 656K (ffff880001b5c000 - ffff880001c00000)
BFS CPU scheduler v0.462 by Con Kolivas.
BFS enhancement patch set by Alfred Chen.
systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Running in initial RAM disk.
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
systemd[1]: Inserted module 'ipv6'
systemd[1]: No hostname configured.
systemd[1]: Set hostname to .
random: systemd urandom read with 9 bits of entropy available
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Expecting device dev-sda1.device...
systemd[1]: Starting -.slice.
systemd[1]: Created slice -.slice.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Slices.
systemd[1]: Reached target Slices.
systemd[1]: Starting Timers.
systemd[1]: Reached target Timers.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Started dracut ask for additional cmdline parameters.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
systemd-udevd[230]: starting version 208
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:0c: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
acpi device:0f: registered as cooling_device1
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0e/LNXVIDEO:01/input/input7
[drm] Initialized drm 1.1.0 20060810
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7806] (rev 0)
sdhci-pci 0000:00:14.7: No vmmc regulator found
sdhci-pci 0000:00:14.7: No vqmmc regulator found
usbcore: registered new device driver usb
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci-pci: EHCI PCI platform driver
mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4e000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.1.3-nrjQL-desktop-1omv ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4c000
sr 1:0:0:0: [sr0] scsi3-mmc drive: 8x/8x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
[drm] radeon kernel modesetting enabled.
VGA switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.1.3-nrjQL-desktop-1omv ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb48000
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.1.3-nrjQL-desktop-1omv ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
checking generic (a0000000 300000) vs hw (a0000000 10000000)
fb: switching to radeondrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (SUMO 0x1002:0x9641 0x144D:0xC609).
[drm] register mmio base: 0xFEB00000
[drm] register mmio size: 262144
ATOM BIOS: General
radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 2788380 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading SUMO Microcode
ohci-pci: OHCI PCI platform driver
[drm] Internal thermal controller without fan control
== power state 0 ==
ui class: none
internal class: uvd_mvc
caps:
uvd vclk: 66667 dclk: 55173
power level 0 sclk: 44445 vddc: 1025
status:
== power state 1 ==
ui class: none
internal class: uvd_hd
caps:
uvd vclk: 40000 dclk: 30770
power level 0 sclk: 27587 vddc: 875
status:
== power state 2 ==
ui class: none
internal class: uvd
caps:
uvd vclk: 66667 dclk: 55173
power level 0 sclk: 44445 vddc: 1025
status:
== power state 3 ==
ui class: battery
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 27587 vddc: 875
status:
== power state 4 ==
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 27587 vddc: 875
power level 1 sclk: 44445 vddc: 1025
status:
== power state 5 ==
ui class: none
internal class: boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 20000 vddc: 1025
status: c r b
== power state 6 ==
ui class: none
internal class: thermal
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 20000 vddc: 875
status:
[drm] Found smc ucode version: 0x00010d00
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801d3315c00
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801d3315c0c
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001832118
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: radeon: MSI limited to 32-bit
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 2-2: new high-speed USB device number 2 using ehci-pci
usb 2-2: New USB device found, idVendor=2232, idProduct=1008
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: WebCam SCB-1100N
usb 2-2: Manufacturer: 123
[drm] ib test on ring 5 succeeded
Switched to clocksource tsc
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] HPD2
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] CRT1: INTERNAL_UNIPHY2
[drm] CRT1: NUTMEG
[drm] Connector 1:
[drm] LVDS-1
[drm] HPD1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY2
[drm] LCD1: TRAVIS
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
switching from power state:
ui class: none
internal class: boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 20000 vddc: 1025
status: c b
switching to power state:
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 27587 vddc: 875
power level 1 sclk: 44445 vddc: 1025
status: r
[drm] fb mappable at 0xA0478000
[drm] vram apper at 0xA0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
radeon 0000:00:01.0: registered panic notifier
[drm] Initialized radeon 2.42.0 20080528 for 0000:00:01.0 on minor 0
radeon 0000:02:00.0: enabling device (0000 -> 0003)
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4f000
[drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x144D:0xC609).
[drm] register mmio base: 0xFEA20000
[drm] register mmio size: 131072
vga_switcheroo: enabled
ATPX version 1, functions 0x00000181
ATOM BIOS: Samsung_Petronas_DE_SeymourXT_PX
radeon 0000:02:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:02:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 64bits DDR
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading CAICOS Microcode
[drm] Internal thermal controller with fan control
== power state 0 ==
ui class: none
internal class: boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 1 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 2 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
status: c r b
== power state 1 ==
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 1 sclk: 40000 mclk: 80000 vddc: 1050 vddci: 0
power level 2 sclk: 80000 mclk: 80000 vddc: 1150 vddci: 0
status:
== power state 2 ==
ui class: none
internal class: uvd
caps: video
uvd vclk: 70000 dclk: 56000
power level 0 sclk: 70000 mclk: 80000 vddc: 1150 vddci: 0
power level 1 sclk: 70000 mclk: 80000 vddc: 1150 vddci: 0
power level 2 sclk: 70000 mclk: 80000 vddc: 1150 vddci: 0
status:
== power state 3 ==
ui class: battery
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 1 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 2 sclk: 30000 mclk: 30000 vddc: 900 vddci: 0
status:
== power state 4 ==
ui class: battery
internal class: uvd_hd
caps: video
uvd vclk: 40000 dclk: 30000
power level 0 sclk: 40000 mclk: 65000 vddc: 900 vddci: 0
power level 1 sclk: 40000 mclk: 65000 vddc: 900 vddci: 0
power level 2 sclk: 40000 mclk: 65000 vddc: 900 vddci: 0
status:
== power state 5 ==
ui class: battery
internal class: uvd_sd
caps: video
uvd vclk: 10000 dclk: 10000
power level 0 sclk: 30000 mclk: 30000 vddc: 900 vddci: 0
power level 1 sclk: 30000 mclk: 30000 vddc: 900 vddci: 0
power level 2 sclk: 30000 mclk: 30000 vddc: 900 vddci: 0
status:
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.1.3-nrjQL-desktop-1omv ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4d000
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
radeon 0000:02:00.0: WB enabled
radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801d1457c00
radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801d1457c0c
radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90002432118
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:02:00.0: radeon: MSI limited to 32-bit
radeon 0000:02:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 7 usecs
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 4.1.3-nrjQL-desktop-1omv ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb4b000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.1.3-nrjQL-desktop-1omv ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb49000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.1.3-nrjQL-desktop-1omv ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
switching from power state:
ui class: none
internal class: boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 1 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 2 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
status: c b
switching to power state:
ui class: performance
internal class: none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 10000 mclk: 15000 vddc: 900 vddci: 0
power level 1 sclk: 40000 mclk: 80000 vddc: 1050 vddci: 0
power level 2 sclk: 80000 mclk: 80000 vddc: 1150 vddci: 0
status: r
radeon 0000:02:00.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
[drm] fb mappable at 0xB0475000
[drm] vram apper at 0xB0000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
radeon 0000:02:00.0: fb1: radeondrmfb frame buffer device
[drm] Initialized radeon 2.42.0 20080528 for 0000:02:00.0 on minor 1
systemd-journald[117]: Received SIGTERM
systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Non-volatile memory driver v1.3
EXT4-fs (sda1): re-mounted. Opts: (null)
systemd-udevd[473]: starting version 208
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: acpi_idle registered with cpuidle
acpi-cpufreq: overriding BIOS provided _PSD data
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Mic=0x18
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (76 C)
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000e78000, e8:11:32:df:02:75, XID 0c900800 IRQ 28
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
random: nonblocking pool is initialized
Adding 4087092k swap on /dev/sda5. Priority:-1 extents:1 across:4087092k SSFS
cfg80211: Calling CRDA to update world regulatory domain
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[436]: Received request to flush runtime journal from PID 1
microcode: CPU0: patch_level=0x03000025
microcode: CPU0: new patch_level=0x03000027
microcode: CPU1: patch_level=0x03000025
microcode: CPU1: new patch_level=0x03000027
microcode: CPU2: patch_level=0x03000025
microcode: CPU2: new patch_level=0x03000027
microcode: CPU3: patch_level=0x03000025
microcode: CPU3: new patch_level=0x03000027
microcode: Microcode Update Driver: v2.00 , Peter Oruba
media: Linux media interface: v0.10
Linux video capture interface: v2.00
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
uvcvideo: Found UVC 1.00 device WebCam SCB-1100N (2232:1008)
input: WebCam SCB-1100N as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
ath: phy0: Enable LNA combining
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900012c0000, irq=16
samsung_laptop: detected SABI interface: SwSmi@
samsung_laptop: Backlight controlled by ACPI video driver
snmpd[3710]: segfault at 0 ip 0000558840d14002 sp 00007fff8c4d64d8 error 4 in snmpd[558840d14000+6000]
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 17
cfg80211: Calling CRDA to update world regulatory domain
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
vgaarb: device changed decodes: PCI:0000:00:01.0,olddecodes=io+mem,decodes=none:owns=io+mem
wlan0: authenticate with a0:f3:c1:45:cc:14
wlan0: send auth to a0:f3:c1:45:cc:14 (try 1/3)
wlan0: authenticated
wlan0: associate with a0:f3:c1:45:cc:14 (try 1/3)
wlan0: RX AssocResp from a0:f3:c1:45:cc:14 (capab=0x411 status=0 aid=1)
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
Adjusting tsc more than 11% (10386120 vs 10364768)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
fuse init (API version 7.23)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
sh (20573): drop_caches: 3
Adding 4087092k swap on /dev/sda5. Priority:-1 extents:1 across:4087092k SSFS
sh (19533): drop_caches: 3
Adding 4087092k swap on /dev/sda5. Priority:-1 extents:1 across:4087092k SSFS