dmesg - yoga11schess
CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-21-generic (buildd@lamiak) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #21-Ubuntu SMP Sun Jun 14 18:31:11 UTC 2015 (Ubuntu 3.19.0-21.21-generic 3.19.8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000094aaffff] usable
BIOS-e820: [mem 0x0000000094ab0000-0x0000000095eaffff] reserved
BIOS-e820: [mem 0x0000000095eb0000-0x000000009a6befff] usable
BIOS-e820: [mem 0x000000009a6bf000-0x000000009a8befff] type 20
BIOS-e820: [mem 0x000000009a8bf000-0x000000009aebefff] reserved
BIOS-e820: [mem 0x000000009aebf000-0x000000009af6dfff] ACPI NVS
BIOS-e820: [mem 0x000000009af6e000-0x000000009af71fff] ACPI data
BIOS-e820: [mem 0x000000009af72000-0x000000009afbefff] ACPI NVS
BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by INSYDE Corp.
efi: ACPI=0x9affe000 ACPI 2.0=0x9affe014 SMBIOS=0x9aebef98
efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
efi: mem01: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x000000000000e000) (0MB)
efi: mem02: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000000000e000-0x0000000000010000) (0MB)
efi: mem03: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000010000-0x000000000002e000) (0MB)
efi: mem04: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000000002e000-0x000000000002f000) (0MB)
efi: mem05: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000000002f000-0x0000000000030000) (0MB)
efi: mem06: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000030000-0x000000000006f000) (0MB)
efi: mem07: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000006f000-0x0000000000070000) (0MB)
efi: mem08: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000070000-0x0000000000088000) (0MB)
efi: mem09: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x0000000000088000-0x000000000009e000) (0MB)
efi: mem10: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009e000-0x000000000009f000) (0MB)
efi: mem11: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
efi: mem12: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x00000000014e6000) (19MB)
efi: mem13: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000014e6000-0x0000000002000000) (11MB)
efi: mem14: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000002000000-0x00000000033e6000) (19MB)
efi: mem15: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000033e6000-0x0000000035830000) (804MB)
efi: mem16: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000035830000-0x0000000036c10000) (19MB)
efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000036c10000-0x000000006db8f000) (879MB)
efi: mem18: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000006db8f000-0x0000000092ec0000) (595MB)
efi: mem19: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000092ec0000-0x0000000092ee0000) (0MB)
efi: mem20: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000092ee0000-0x0000000093a53000) (11MB)
efi: mem21: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000093a53000-0x0000000093c27000) (1MB)
efi: mem22: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000093c27000-0x0000000094ab0000) (14MB)
efi: mem23: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000094ab0000-0x0000000095eb0000) (20MB)
efi: mem24: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000095eb0000-0x0000000095ebd000) (0MB)
efi: mem25: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000095ebd000-0x0000000095ebf000) (0MB)
efi: mem26: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000095ebf000-0x0000000095f9c000) (0MB)
efi: mem27: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x0000000095f9c000-0x00000000960bf000) (1MB)
efi: mem28: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000960bf000-0x000000009713d000) (16MB)
efi: mem29: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009713d000-0x0000000097148000) (0MB)
efi: mem30: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000097148000-0x0000000097162000) (0MB)
efi: mem31: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000097162000-0x00000000971bf000) (0MB)
efi: mem32: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000971bf000-0x00000000971c1000) (0MB)
efi: mem33: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000971c1000-0x0000000097ffe000) (14MB)
efi: mem34: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000097ffe000-0x0000000098000000) (0MB)
efi: mem35: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000098000000-0x00000000981d1000) (1MB)
efi: mem36: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000981d1000-0x00000000981d2000) (0MB)
efi: mem37: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000981d2000-0x00000000981ea000) (0MB)
efi: mem38: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000981ea000-0x00000000981eb000) (0MB)
efi: mem39: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000981eb000-0x000000009824e000) (0MB)
efi: mem40: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009824e000-0x0000000098251000) (0MB)
efi: mem41: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000098251000-0x0000000098253000) (0MB)
efi: mem42: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000098253000-0x0000000098256000) (0MB)
efi: mem43: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000098256000-0x000000009a0bf000) (30MB)
efi: mem44: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a0bf000-0x000000009a2c0000) (2MB)
efi: mem45: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009a2c0000-0x000000009a2ca000) (0MB)
efi: mem46: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009a2ca000-0x000000009a6bf000) (3MB)
efi: mem47: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x000000009a6bf000-0x000000009a8bf000) (2MB)
efi: mem48: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000009a8bf000-0x000000009aabf000) (2MB)
efi: mem49: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000009aabf000-0x000000009aebf000) (4MB)
efi: mem50: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000009aebf000-0x000000009af6e000) (0MB)
efi: mem51: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x000000009af6e000-0x000000009af72000) (0MB)
efi: mem52: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000009af72000-0x000000009afbf000) (0MB)
efi: mem53: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x000000009afbf000-0x000000009afff000) (0MB)
efi: mem54: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009afff000-0x000000009b000000) (0MB)
efi: mem55: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000025f600000) (5622MB)
efi: mem56: [Reserved | | | | | | | | | ] range=[0x00000000000a0000-0x00000000000c0000) (0MB)
efi: mem57: [Reserved | | | | | | | | | ] range=[0x000000009b000000-0x000000009fa00000) (74MB)
efi: mem58: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000e0000000-0x00000000f0000000) (256MB)
efi: mem59: [Reserved | | | | | | | | | ] range=[0x00000000fe101000-0x00000000fe113000) (0MB)
efi: mem60: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000feb00000-0x00000000feb10000) (0MB)
efi: mem61: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem62: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
efi: mem63: [Memory Mapped I/O |RUN| | | | | | | | ] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem64: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed20000-0x00000000fee01000) (0MB)
efi: mem65: [Memory Mapped I/O |RUN| | | | | | | | ] range=[0x00000000ffc00000-0x0000000100000000) (4MB)
SMBIOS 2.7 present.
DMI: LENOVO 20246/Yoga2, BIOS 8FCN19WW(V1.00) 08/16/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7F80000000 write-back
1 base 0080000000 mask 7FE0000000 write-back
2 base 009B000000 mask 7FFF000000 uncachable
3 base 009C000000 mask 7FFC000000 uncachable
4 base 00FFC00000 mask 7FFFC00000 write-protect
5 base 0100000000 mask 7F00000000 write-back
6 base 0200000000 mask 7F80000000 write-back
7 base 025F600000 mask 7FFFE00000 uncachable
8 base 025F800000 mask 7FFF800000 uncachable
9 base 0260000000 mask 7FE0000000 uncachable
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000024000] 24000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02fe5000, 0x02fe5fff] PGTABLE
BRK [0x02fe6000, 0x02fe6fff] PGTABLE
BRK [0x02fe7000, 0x02fe7fff] PGTABLE
init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
[mem 0x25f400000-0x25f5fffff] page 2M
BRK [0x02fe8000, 0x02fe8fff] PGTABLE
init_memory_mapping: [mem 0x240000000-0x25f3fffff]
[mem 0x240000000-0x25f3fffff] page 2M
init_memory_mapping: [mem 0x220000000-0x23fffffff]
[mem 0x220000000-0x23fffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x94aaffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x949fffff] page 2M
[mem 0x94a00000-0x94aaffff] page 4k
init_memory_mapping: [mem 0x95eb0000-0x9a6befff]
[mem 0x95eb0000-0x95ffffff] page 4k
[mem 0x96000000-0x9a5fffff] page 2M
[mem 0x9a600000-0x9a6befff] page 4k
BRK [0x02fe9000, 0x02fe9fff] PGTABLE
BRK [0x02fea000, 0x02feafff] PGTABLE
init_memory_mapping: [mem 0x9afff000-0x9affffff]
[mem 0x9afff000-0x9affffff] page 4k
init_memory_mapping: [mem 0x100000000-0x21fffffff]
[mem 0x100000000-0x21fffffff] page 1G
RAMDISK: [mem 0x35830000-0x36c0ffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000009AFFE014 000024 (v02 LENOVO)
ACPI: XSDT 0x000000009AFFE210 0000CC (v01 LENOVO CB-01 00000001 01000013)
ACPI: FACP 0x000000009AFEC000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DSDT 0x000000009AFDA000 00ED0E (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FACS 0x000000009AFBA000 000040
ACPI: SLIC 0x000000009AFFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: UEFI 0x000000009AFFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009AFF1000 00AFA6 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FPDT 0x000000009AFEF000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: MSDM 0x000000009AFEE000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASF! 0x000000009AFED000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: HPET 0x000000009AFEB000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: APIC 0x000000009AFEA000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: MCFG 0x000000009AFE9000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009AFD7000 002028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: BOOT 0x000000009AFD5000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASPT 0x000000009AFD3000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DBGP 0x000000009AFD2000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009AFC9000 000494 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009AFC8000 000AD8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009AFC4000 00344F (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009AFC3000 000393 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: PCCT 0x000000009AFC2000 00006E (v05 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009AFC1000 000AC4 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: BGRT 0x000000009AFC0000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
NODE_DATA(0) allocated [mem 0x25f5f8000-0x25f5fcfff]
[ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256c00000-ffff88025ebfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x25f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0006efff]
node 0: [mem 0x00070000-0x00087fff]
node 0: [mem 0x00100000-0x94aaffff]
node 0: [mem 0x95eb0000-0x9a6befff]
node 0: [mem 0x9afff000-0x9affffff]
node 0: [mem 0x100000000-0x25f5fffff]
Initmem setup node 0 [mem 0x00001000-0x25f5fffff]
On node 0 totalpages: 2066502
DMA zone: 64 pages used for memmap
DMA zone: 111 pages reserved
DMA zone: 3974 pages, LIFO batch:0
DMA32 zone: 9739 pages used for memmap
DMA32 zone: 623296 pages, LIFO batch:31
Normal zone: 22488 pages used for memmap
Normal zone: 1439232 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x9ba00000-0x9f9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
PM: Registered nosave memory: [mem 0x94ab0000-0x95eaffff]
PM: Registered nosave memory: [mem 0x9a6bf000-0x9a8befff]
PM: Registered nosave memory: [mem 0x9a8bf000-0x9aebefff]
PM: Registered nosave memory: [mem 0x9aebf000-0x9af6dfff]
PM: Registered nosave memory: [mem 0x9af6e000-0x9af71fff]
PM: Registered nosave memory: [mem 0x9af72000-0x9afbefff]
PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88025f200000 s87040 r8192 d31744 u262144
pcpu-alloc: s87040 r8192 d31744 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2034100
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7962948K/8266008K available (8000K kernel code, 1232K rwdata, 3752K rodata, 1408K init, 1300K bss, 303060K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:760 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 1496.196 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2992.39 BogoMIPS (lpj=5984784)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff81e96000 - ffffffff81e9e000)
Ignoring BGRT: invalid status 0 (expected 1)
ftrace: allocating 30086 entries in 118 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i3-4020Y CPU @ 1.50GHz (fam: 06, model: 45, stepping: 01)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
#3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (11969.56 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x9aebf000-0x9af6dfff] (716800 bytes)
PM: Registering ACPI NVS region [mem 0x9af72000-0x9afbefff] (315392 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 6:04:52, date: 07/07/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880255609C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880255553000 0005AA (v01 PmRef ApIst 00003000 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802556DC000 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a1e] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xb0418000-0xb041bfff 64bit]
pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xb0410000-0xb0417fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb0400000-0xb040ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xb0420000-0xb042001f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xb041c000-0xb041ffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xb0424000-0xb04243ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1f.2: reg 0x24: [mem 0xb0423000-0xb04237ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xb0421000-0xb04210ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f]
pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xb0422000-0xb0422fff 64bit]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
e820: reserve RAM buffer [mem 0x94ab0000-0x97ffffff]
e820: reserve RAM buffer [mem 0x9a6bf000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x1800-0x18fe] could not be reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs SYN2b2d SYN2b00 SYN0002 PNP0f13 (active)
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0x9fa20000-0x9fa20fff] has been reserved
system 00:05: [mem 0xffffffff-0x10000fffe] could not be reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20352K (ffff880035830000 - ffff880036c10000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x8eec0000-0x92ec0000] (64MB) mapped at [ffff88008eec0000-ffff880092ebffff]
Simple Boot Flag at 0x44 set to 0x1
RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1436249092.832:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xa0000000, mapped to 0xffffc90010f00000, using 4160k, total 4160k
efifb: mode is 1366x768x32, linelength=5504, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 170x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ADP0] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-21-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-21-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xb0424000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-21-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Error parsing PCC subspaces from PCCT
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
ACPI: Battery Slot [BAT0] (battery present)
Loaded X.509 cert 'Magrathea: Glacier signing key: 333a84cc9705ddb26e1cdce388afcedc2deff761'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 7:677:63
rtc_cmos 00:01: setting system clock to 2015-07-07 06:04:53 UTC (1436249093)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d36000 - ffffffff81e96000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 180K (ffff8800027d3000 - ffff880002800000)
Freeing unused kernel memory: 344K (ffff880002baa000 - ffff880002c00000)
random: systemd-udevd urandom read with 4 bits of entropy available
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x2 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xb0423000 port 0xb0423180 irq 41
ata3: DUMMY
ata4: DUMMY
usb 1-1: new high-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 3-1: New USB device found, idVendor=8087, idProduct=8000
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: ATA-9: SAMSUNG MZMTD128HAFV-000L1, DXT43L0Q, max UDMA/133
ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SAMSUNG MZMTD128 3L0Q PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 1:0:0:0: [sda] Attached SCSI disk
usb 1-1: New USB device found, idVendor=5986, idProduct=053d
usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-1: Product: Lenovo EasyCamera
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 200901010001
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
usb 1-5: new high-speed USB device number 3 using xhci_hcd
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
psmouse serio1: synaptics: queried max coordinates: x [..5702], y [..4730]
psmouse serio1: synaptics: queried min coordinates: x [1242..], y [1124..]
usb 1-5: New USB device found, idVendor=0bda, idProduct=1724
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: 802.11n WLAN Adapter
usb 1-5: Manufacturer: Realtek
usb 1-5: SerialNumber: 00e04c000001
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Mounting Debug File System...
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Braille Device Support...
systemd[1]: Starting Nameserver information manager...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Starting fsck to fsckd communication Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Read required files in advance...
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Mounted POSIX Message Queue File System.
lp: driver loaded but no devices found
systemd[1]: Started Nameserver information manager.
ppdev: user-space parallel port driver
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00323/0x840300/0x126c00, board id: 2132, fw id: 1139425
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounted Configuration File System.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Starting udev Wait for Complete Device Initialization...
systemd[1]: Starting udev Kernel Device Manager...
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
usb 1-6: new full-speed USB device number 4 using xhci_hcd
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Starting Show Plymouth Boot Screen...
systemd[1]: Started Journal Service.
tsc: Refined TSC clocksource calibration: 1496.539 MHz
usb 1-6: New USB device found, idVendor=2047, idProduct=0855
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: Lenovo Yoga
usb 1-6: Manufacturer: Invensense
usb 1-6: SerialNumber: 09F9806F22000C00
usb 1-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
usb 1-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
hidraw: raw HID events driver (C) Jiri Kosina
ACPI Error: [\_SB_.PCI0.LPCB.EC0_.CFAN] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.IETM._TRT] (Node ffff8802568eb910), AE_NOT_FOUND (20141107/psparse-536)
ACPI Error: [\_SB_.PCI0.LPCB.EC0_.ECRD] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.TMEM._TMP] (Node ffff8802568e9528), AE_NOT_FOUND (20141107/psparse-536)
thermal thermal_zone0: failed to read out thermal zone 0
ACPI Error: [\_SB_.PCI0.LPCB.EC0_.ECRD] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.TAMB._TMP] (Node ffff8802568e7a78), AE_NOT_FOUND (20141107/psparse-536)
thermal thermal_zone1: failed to read out thermal zone 1
ACPI Error: [\_SB_.PCI0.LPCB.EC0_.ECRD] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.TEFN._TMP] (Node ffff8802568e7de8), AE_NOT_FOUND (20141107/psparse-536)
thermal thermal_zone2: failed to read out thermal zone 2
ACPI Error: [\_SB_.PCI0.LPCB.EC0_.SKNT] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.TSKN._TMP] (Node ffff8802568e9910), AE_NOT_FOUND (20141107/psparse-536)
thermal thermal_zone3: failed to read out thermal zone 3
ACPI Error: [\_SB_.PCI0.LPCB.EC0_.ECRD] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.T_VR._TMP] (Node ffff8802568e9cd0), AE_NOT_FOUND (20141107/psparse-536)
thermal thermal_zone4: failed to read out thermal zone 4
input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6
random: nonblocking pool is initialized
usb 1-7: new full-speed USB device number 5 using xhci_hcd
[drm] Initialized drm 1.1.0 20060810
[drm] Memory usable by graphics device = 2048M
checking generic (a0000000 410000) vs hw (a0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sound hdaudioC1D0: CX20756: BIOS auto-probing.
sound hdaudioC1D0: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: mono: mono_out=0x0
sound hdaudioC1D0: inputs:
sound hdaudioC1D0: Internal Mic=0x1a
sound hdaudioC1D0: Mic=0x19
sound hdaudioC1D0: Enable sync_write for stable communication
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
usb 1-7: New USB device found, idVendor=03eb, idProduct=8814
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7: Product: Atmel maXTouch Digitizer
usb 1-7: Manufacturer: Atmel
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
media: Linux media interface: v0.10
Linux video capture interface: v2.00
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:053d)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input13
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
hid-generic 0003:03EB:8814.0003: hiddev0,hidraw0: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-7/input1
input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:03EB:8814.0002/input/input14
hid-multitouch 0003:03EB:8814.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-7/input0
cfg80211: Calling CRDA to update world regulatory domain
Adding 8265724k swap on /dev/sda3. Priority:-1 extents:1 across:8265724k SSFS
r8723au: module is from the staging directory, the quality is unknown, you have been warned.
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
usbcore: registered new interface driver rtl8723au
Switched to clocksource tsc
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[262]: Received request to flush runtime journal from PID 1
audit: type=1400 audit(1436249096.011:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=488 comm="apparmor_parser"
audit: type=1400 audit(1436249096.011:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=488 comm="apparmor_parser"
audit: type=1400 audit(1436249096.015:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=488 comm="apparmor_parser"
audit: type=1400 audit(1436249096.015:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=488 comm="apparmor_parser"
audit: type=1400 audit(1436249096.015:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=488 comm="apparmor_parser"
audit: type=1400 audit(1436249096.015:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=488 comm="apparmor_parser"
audit: type=1400 audit(1436249096.027:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=488 comm="apparmor_parser"
audit: type=1400 audit(1436249096.027:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=488 comm="apparmor_parser"
audit: type=1400 audit(1436249096.027:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=488 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
rtl8723au: Loading firmware rtlwifi/rtl8723aufw_B.bin
RTL8723AU: Firmware Version 33, SubVersion 0, Signature 0x2302
RTL8723AU: set ssid [WLAN-Wespe] fw_state = 0x00000008
RTL8723AU: start auth
RTL8723AU: auth success, start assoc
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
acpi device:27: Cannot transition to power state D3cold for parent in (unknown)
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
cfg80211: Calling CRDA to update world regulatory domain
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
cfg80211: Calling CRDA to update world regulatory domain
sd 1:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 214.574 msecs
PM: late suspend of devices complete after 24.124 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 15.957 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
Broke affinity for irq 40
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 15.925 msecs
PM: early resume of devices complete after 0.308 msecs
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
sd 1:0:0:0: [sda] Starting disk
rtc_cmos 00:01: System wakeup disabled by ACPI
usb 3-1: reset high-speed USB device number 2 using ehci-pci
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
usb 1-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880099028d08
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880099028cc0
usb 1-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
usb 1-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
psmouse serio1: synaptics: queried max coordinates: x [..5702], y [..4730]
psmouse serio1: synaptics: queried min coordinates: x [1242..], y [1124..]
usb 1-5: reset high-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003663e600
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003663e648
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003663e690
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025250b480
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025250b4c8
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802556dfc00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802556dfc48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802556dfc90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802556dfcd8
rtl8723au: Loading firmware rtlwifi/rtl8723aufw_B.bin
usb 1-7: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880096ce2000
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880096ce2048
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880252aa1900
PM: resume of devices complete after 1138.709 msecs
PM: Finishing wakeup.
Restarting tasks ...
usb 1-1: USB disconnect, device number 2
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
done.
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
usb 1-1: new high-speed USB device number 6 using xhci_hcd
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at /build/buildd/linux-3.19.0/drivers/gpu/drm/i915/intel_display.c:9717 intel_check_page_flip+0xda/0xf0 [i915]()
Kicking stuck page flip: queued at 42968, now 42973
Modules linked in: binfmt_misc nls_iso8859_1 r8723au(C) hid_sensor_magn_3d hid_sensor_rotation hid_sensor_incl_3d hid_sensor_gyro_3d hid_sensor_accel_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio hid_sensor_iio_common cfg80211 hid_multitouch hid_generic hid_sensor_hub uvcvideo videobuf2_vmalloc videobuf2_memops snd_hda_codec_hdmi videobuf2_core v4l2_common videodev usbhid media joydev intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_conexant aesni_intel snd_hda_codec_generic aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd i915 snd_hda_intel serio_raw snd_hda_controller drm_kms_helper mei_me snd_hda_codec mei drm i2c_algo_bit lpc_ich snd_hwdep snd_soc_rt5640
snd_soc_rl6231 snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq ideapad_laptop sparse_keymap int3403_thermal 8250_fintek snd_seq_device snd_timer dw_dmac snd dw_dmac_core snd_soc_sst_acpi video int3402_thermal int3400_thermal i2c_hid acpi_thermal_rel 8250_dw hid soundcore mac_hid soc_button_array spi_pxa2xx_platform i2c_designware_platform processor_thermal_device i2c_designware_core cuse parport_pc ppdev lp parport autofs4 psmouse ahci libahci sdhci_acpi sdhci
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G C 3.19.0-21-generic #21-Ubuntu
Hardware name: LENOVO 20246/Yoga2, BIOS 8FCN19WW(V1.00) 08/16/2013
ffffffffc06b0de8 ffff88025f203d28 ffffffff817c3da8 0000000000000007
ffff88025f203d78 ffff88025f203d68 ffffffff810769aa ffff88025f203d88
ffff880252190000 ffff88003657d000 0000000000000000 ffff88003657d1a8
Call Trace:
[] dump_stack+0x45/0x57
[] warn_slowpath_common+0x8a/0xc0
[] warn_slowpath_fmt+0x46/0x50
[] intel_check_page_flip+0xda/0xf0 [i915]
[] ironlake_irq_handler+0x2e8/0xfd0 [i915]
[] ? internal_add_timer+0x80/0x80
[] ? hrtimer_get_next_event+0xac/0xd0
[] ? notifier_call_chain+0x4f/0x80
[] handle_irq_event_percpu+0x77/0x1a0
[] handle_irq_event+0x41/0x70
[] handle_edge_irq+0x6e/0x120
[] handle_irq+0x22/0x40
[] do_IRQ+0x4f/0xf0
[] common_interrupt+0x6d/0x6d
[] ? cpuidle_enter_state+0x65/0x160
[] ? cpuidle_enter_state+0x51/0x160
[] cpuidle_enter+0x17/0x20
[] cpu_startup_entry+0x311/0x3b0
[] rest_init+0x77/0x80
[] start_kernel+0x482/0x48f
[] ? early_idt_handlers+0x120/0x120
[] x86_64_start_reservations+0x2a/0x2c
[] x86_64_start_kernel+0x143/0x152
---[ end trace c66f350717912705 ]---
usb 1-1: New USB device found, idVendor=5986, idProduct=053d
usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-1: Product: Lenovo EasyCamera
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 200901010001
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:053d)
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input16
RTL8723AU: set ssid [WLAN-Wespe] fw_state = 0x00000008
RTL8723AU: start auth
RTL8723AU: auth success, start assoc
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
RTL8723AU: send eapol packet
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
acpi device:27: Cannot transition to power state D3cold for parent in (unknown)
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
RTL8723AU: sta recv deauth reason code(7) sta:00:1c:4a:a5:1f:39
RTL8723AU: sta recv deauth reason code(7) sta:00:1c:4a:a5:1f:39
RTL8723AU: sta recv deauth reason code(7) sta:00:1c:4a:a5:1f:39
RTL8723AU: sta recv deauth reason code(7) sta:00:1c:4a:a5:1f:39
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: Calling CRDA to update world regulatory domain
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
cfg80211: Calling CRDA to update world regulatory domain
sd 1:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 135.768 msecs
PM: late suspend of devices complete after 23.984 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 16.194 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
Broke affinity for irq 41
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 15.850 msecs
PM: early resume of devices complete after 0.406 msecs
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
sd 1:0:0:0: [sda] Starting disk
rtc_cmos 00:01: System wakeup disabled by ACPI
usb 3-1: reset high-speed USB device number 2 using ehci-pci
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
usb 1-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880099028d08
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880099028cc0
usb 1-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
usb 1-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
psmouse serio1: synaptics: queried max coordinates: x [..5702], y [..4730]
psmouse serio1: synaptics: queried min coordinates: x [1242..], y [1124..]
usb 1-7: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880096ce2000
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880096ce2048
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880252aa1900
usb 1-5: reset high-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003663e600
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003663e648
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003663e690
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025250b480
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025250b4c8
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802556dfc00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802556dfc48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802556dfc90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802556dfcd8
rtl8723au: Loading firmware rtlwifi/rtl8723aufw_B.bin
PM: resume of devices complete after 1498.631 msecs
PM: Finishing wakeup.
Restarting tasks ...
usb 1-1: USB disconnect, device number 6
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
done.
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
usb 1-1: new high-speed USB device number 7 using xhci_hcd
usb 1-1: New USB device found, idVendor=5986, idProduct=053d
usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-1: Product: Lenovo EasyCamera
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 200901010001
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:053d)
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input17
RTL8723AU: set ssid [WLAN-Wespe] fw_state = 0x00000008
RTL8723AU: start auth
RTL8723AU: auth success, start assoc
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
mce: [Hardware Error]: Machine check events logged
RTL8723AU: send eapol packet
perf interrupt took too long (2571 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
show_signal_msg: 45 callbacks suppressed
plugin-containe[2620]: segfault at b ip 00007f6f78f14c05 sp 00007ffc709dce40 error 4 in libflashplayer.so[7f6f78714000+1189000]
RTL8723AU: send eapol packet
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
acpi device:27: Cannot transition to power state D3cold for parent in (unknown)
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
cfg80211: Calling CRDA to update world regulatory domain
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
cfg80211: Calling CRDA to update world regulatory domain
sd 1:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 226.655 msecs
PM: late suspend of devices complete after 23.990 msecs
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 16.133 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
Broke affinity for irq 41
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 15.863 msecs
PM: early resume of devices complete after 0.304 msecs
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
sd 1:0:0:0: [sda] Starting disk
rtc_cmos 00:01: System wakeup disabled by ACPI
usb 3-1: reset high-speed USB device number 2 using ehci-pci
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
usb 1-5: reset high-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003663e600
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003663e648
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003663e690
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025250b480
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025250b4c8
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802556dfc00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802556dfc48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802556dfc90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802556dfcd8
psmouse serio1: synaptics: queried max coordinates: x [..5702], y [..4730]
rtl8723au: Loading firmware rtlwifi/rtl8723aufw_B.bin
psmouse serio1: synaptics: queried min coordinates: x [1242..], y [1124..]
usb 1-7: reset full-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880096ce2000
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880096ce2048
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880252aa1900
usb 1-6: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880099028d08
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880099028cc0
usb 1-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
usb 1-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
PM: resume of devices complete after 953.750 msecs
PM: Finishing wakeup.
Restarting tasks ...
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
usb 1-1: USB disconnect, device number 7
done.
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
usb 1-1: new high-speed USB device number 8 using xhci_hcd
usb 1-1: New USB device found, idVendor=5986, idProduct=053d
usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-1: Product: Lenovo EasyCamera
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 200901010001
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:053d)
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input18
RTL8723AU: set ssid [WLAN-Wespe] fw_state = 0x00000008
RTL8723AU: start auth
RTL8723AU: auth success, start assoc
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
mce: [Hardware Error]: Machine check events logged
RTL8723AU: send eapol packet
plugin-containe[3769]: segfault at 69 ip 00007fd1751b9c84 sp 00007ffc975277c0 error 4 in libpthread-2.21.so[7fd1751b0000+18000]
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
plugin-containe[5434]: segfault at b ip 00007fd94ed14c05 sp 00007ffc01210920 error 4 in libflashplayer.so[7fd94e514000+1189000]
RTL8723AU: send eapol packet
perf interrupt took too long (5015 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: linked_status_chk23a(wlan0): disconnect or roaming
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
RTL8723AU: nolinked power save enter
rtl8723au: Loading firmware rtlwifi/rtl8723aufw_B.bin
RTL8723AU: nolinked power save leave
RTL8723AU: nolinked power save enter
rtl8723au: Loading firmware rtlwifi/rtl8723aufw_B.bin
RTL8723AU: nolinked power save leave
RTL8723AU: nolinked power save enter
rtl8723au: Loading firmware rtlwifi/rtl8723aufw_B.bin
RTL8723AU: nolinked power save leave
RTL8723AU: nolinked power save enter
rtl8723au: Loading firmware rtlwifi/rtl8723aufw_B.bin
RTL8723AU: nolinked power save leave
RTL8723AU: nolinked power save enter
rtl8723au: Loading firmware rtlwifi/rtl8723aufw_B.bin
RTL8723AU: nolinked power save leave
RTL8723AU: nolinked power save enter
rtl8723au: Loading firmware rtlwifi/rtl8723aufw_B.bin
RTL8723AU: nolinked power save leave
RTL8723AU: nolinked power save enter
rtl8723au: Loading firmware rtlwifi/rtl8723aufw_B.bin
RTL8723AU: nolinked power save leave
RTL8723AU: nolinked power save enter
rtl8723au: Loading firmware rtlwifi/rtl8723aufw_B.bin
RTL8723AU: nolinked power save leave
RTL8723AU: set ssid [WLAN-Wespe] fw_state = 0x00000008
RTL8723AU: start auth
RTL8723AU: auth success, start assoc
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet
RTL8723AU: send eapol packet