dmesg - LLVMpipe

Return To LLVMpipe System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.68-1+deb7u2
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
 BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bf7b0000 (usable)
 BIOS-e820: 00000000bf7b0000 - 00000000bf7cb000 (ACPI data)
 BIOS-e820: 00000000bf7cb000 - 00000000bf7cc000 (ACPI NVS)
 BIOS-e820: 00000000bf7cc000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: LENOVO 4157WK9/LENOVO, BIOS 60KT29AUS 09/17/2009
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x140000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0C0000000 mask FC0000000 uncachable
  1 base 000000000 mask F00000000 write-back
  2 base 100000000 mask FC0000000 write-back
  3 base 0BF800000 mask FFF800000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
found SMP MP-table at [c00f6940] f6940
initial memory mapped : 0 - 01a00000
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: 0000000000000000-00000000379fe000
 0000000000 - 0000200000 page 4k
 0000200000 - 0037800000 page 2M
 0037800000 - 00379fe000 page 4k
kernel direct mapping tables up to 379fe000 @ 19f9000-1a00000
RAMDISK: 36c86000 - 3763b000
ACPI: RSDP 000f6910 00024 (v02 PTLTD )
ACPI: XSDT bf7c3743 00074 (v01 LENOVO TC-60    060400D0  LTP 00000000)
ACPI: FACP bf7caa19 000F4 (v03 INTEL  TYLERBRG 060400D0 PTL  00000002)
ACPI: DSDT bf7c37b7 071DE (v01  Intel TYLERBRG 060400D0 MSFT 0100000E)
ACPI: FACS bf7cbfc0 00040
ACPI: SSDT bf7bb6f7 00C2E (v01  INTEL PPM RCM  80000001 INTL 20061109)
ACPI: TCPA bf7cab31 00032 (v01 LENOVO TC-2W    060400D0 PTL  00000000)
ACPI: SLIC bf7cab63 00176 (v01 LENOVO TC-60    060400D0  LTP 00000000)
ACPI: DMAR bf7cacd9 001C0 (v01 Intel  OEMDMAR  060400D0 LOHR 00000001)
ACPI: APIC bf7cae99 00068 (v01 PTLTD  ? APIC   060400D0  LTP 00000000)
ACPI: MCFG bf7caf01 0003C (v01 PTLTD    MCFG   060400D0  LTP 00000000)
ACPI: HPET bf7caf3d 00038 (v01 PTLTD  HPETTBL  060400D0  LTP 00000001)
ACPI: BOOT bf7caf75 00028 (v01 PTLTD  $SBFTBL$ 060400D0  LTP 00000001)
ACPI: ASF! bf7caf9d 00063 (v32 LENOVO TC-60    060400D0 PTL  00000001)
ACPI: Local APIC address 0xfee00000
4230MB HIGHMEM available.
889MB LOWMEM available.
  mapped low ram: 0 - 379fe000
  low ram: 0 - 379fe000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000379fe
  HighMem  0x000379fe -> 0x00140000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x000bf7b0
    0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1046333
free_area_init_node: node 0, pgdat c1414800, node_mem_map f4486200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3949 pages, LIFO batch:0
  Normal zone: 1748 pages used for memmap
  Normal zone: 221994 pages, LIFO batch:31
  HighMem zone: 8461 pages used for memmap
  HighMem zone: 810149 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f79cf000 s33344 r0 d24000 u57344
pcpu-alloc: s33344 r0 d24000 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1036092
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (000379fe:00140000)
Memory: 4128200k/5242880k available (2860k kernel code, 57132k reserved, 1348k data, 424k init, 3274440k highmem)
virtual kernel memory layout:
    fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
    pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
    vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
      .init : 0xc141d000 - 0xc1487000   ( 424 kB)
      .data : 0xc12cb100 - 0xc141c200   (1348 kB)
      .text : 0xc1000000 - 0xc12cb100   (2860 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f4006000 soft=f4008000
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2526.674 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.34 BogoMIPS (lpj=10106696)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110623
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU           W3505  @ 2.53GHz stepping 05
Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
CPU 1 irqstacks, hard=f40b4000 soft=f40b6000
Booting Node   0, Processors  #1 Ok.
smpboot cpu 1: start_ip = 99000
Initializing CPU#1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (10107.08 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at bf7cb000 (4096 bytes)
print_constraints: dummy: 
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-05] at [mem 0xe0000000-0xe05fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe05fffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfdffffff]
pci 0000:00:00.0: [8086:3405] type 0 class 0x000600
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
pci 0000:00:16.0: [8086:3430] type 0 class 0x000880
pci 0000:00:16.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
pci 0000:00:16.1: [8086:3431] type 0 class 0x000880
pci 0000:00:16.1: reg 10: [mem 0x00000000-0x00003fff 64bit]
pci 0000:00:16.2: [8086:3432] type 0 class 0x000880
pci 0000:00:16.2: reg 10: [mem 0x00000000-0x00003fff 64bit]
pci 0000:00:16.3: [8086:3433] type 0 class 0x000880
pci 0000:00:16.3: reg 10: [mem 0x00000000-0x00003fff 64bit]
pci 0000:00:16.4: [8086:3429] type 0 class 0x000880
pci 0000:00:16.4: reg 10: [mem 0x00000000-0x00003fff 64bit]
pci 0000:00:16.5: [8086:342a] type 0 class 0x000880
pci 0000:00:16.5: reg 10: [mem 0x00000000-0x00003fff 64bit]
pci 0000:00:16.6: [8086:342b] type 0 class 0x000880
pci 0000:00:16.6: reg 10: [mem 0x00000000-0x00003fff 64bit]
pci 0000:00:16.7: [8086:342c] type 0 class 0x000880
pci 0000:00:16.7: reg 10: [mem 0x00000000-0x00003fff 64bit]
pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io  0x1800-0x181f]
pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io  0x1820-0x183f]
pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xd4404000-0xd44043ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xd4400000-0xd4403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io  0x1840-0x185f]
pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io  0x1860-0x187f]
pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io  0x1880-0x189f]
pci 0000:00:1d.3: [8086:3a39] type 0 class 0x000c03
pci 0000:00:1d.3: reg 20: [io  0x18a0-0x18bf]
pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xd4405000-0xd44053ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io  0x18f0-0x18f7]
pci 0000:00:1f.2: reg 14: [io  0x18e4-0x18e7]
pci 0000:00:1f.2: reg 18: [io  0x18e8-0x18ef]
pci 0000:00:1f.2: reg 1c: [io  0x18e0-0x18e3]
pci 0000:00:1f.2: reg 20: [io  0x18d0-0x18df]
pci 0000:00:1f.2: reg 24: [io  0x18c0-0x18cf]
pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xd4406000-0xd44060ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x1c00-0x1c1f]
pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
pci 0000:00:1f.5: reg 10: [io  0x1c48-0x1c4f]
pci 0000:00:1f.5: reg 14: [io  0x18fc-0x18ff]
pci 0000:00:1f.5: reg 18: [io  0x1c40-0x1c47]
pci 0000:00:1f.5: reg 1c: [io  0x18f8-0x18fb]
pci 0000:00:1f.5: reg 20: [io  0x1c30-0x1c3f]
pci 0000:00:1f.5: reg 24: [io  0x1c20-0x1c2f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:02:00.0: [10de:0ffa] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: reg 24: [io  0x2000-0x207f]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:02:00.1: [10de:0e1b] type 0 class 0x000403
pci 0000:02:00.1: reg 10: [mem 0xd4000000-0xd4003fff]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:03.0:   bridge window [mem 0xd2000000-0xd40fffff]
pci 0000:00:03.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0: PCI bridge to [bus 04-04]
pci 0000:05:00.0: [14e4:167b] type 0 class 0x000200
pci 0000:05:00.0: reg 10: [mem 0xd4100000-0xd410ffff 64bit]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 05-05]
pci 0000:00:1c.4:   bridge window [mem 0xd4100000-0xd41fffff]
pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfdffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d400 - 000000000009ffff 
reserve RAM buffer: 00000000bf7b0000 - 00000000bfffffff 
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0xfed40000-0xfed44fff]
pnp 00:00: Plug and Play ACPI device, IDs BCM0102 PNP0c31 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io  0x0000-0x0cf7 window]
pnp 00:01: [io  0x0cf8-0x0cff]
pnp 00:01: [io  0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c0000-0x000c3fff window]
pnp 00:01: [mem 0x000c4000-0x000c7fff window]
pnp 00:01: [mem 0x000c8000-0x000cbfff window]
pnp 00:01: [mem 0x000cc000-0x000cffff window]
pnp 00:01: [mem 0x000d0000-0x000d3fff window]
pnp 00:01: [mem 0x000d4000-0x000d7fff window]
pnp 00:01: [mem 0x000d8000-0x000dbfff window]
pnp 00:01: [mem 0x000dc000-0x000dffff window]
pnp 00:01: [mem 0x000e0000-0x000e3fff window]
pnp 00:01: [mem 0x000e4000-0x000e7fff window]
pnp 00:01: [mem 0x000e8000-0x000ebfff window]
pnp 00:01: [mem 0x000ec000-0x000effff window]
pnp 00:01: [mem 0xc0000000-0xfdffffff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:02: [io  0x0010-0x001f]
pnp 00:02: [io  0x0024-0x0025]
pnp 00:02: [io  0x0028-0x0029]
pnp 00:02: [io  0x002c-0x002d]
pnp 00:02: [io  0x002e-0x002f]
pnp 00:02: [io  0x0030-0x0031]
pnp 00:02: [io  0x0034-0x0035]
pnp 00:02: [io  0x0038-0x0039]
pnp 00:02: [io  0x003c-0x003d]
pnp 00:02: [io  0x004e-0x004f]
pnp 00:02: [io  0x0050-0x0053]
pnp 00:02: [io  0x0063]
pnp 00:02: [io  0x0065]
pnp 00:02: [io  0x0067]
pnp 00:02: [io  0x0072-0x0077]
pnp 00:02: [io  0x0080]
pnp 00:02: [io  0x0090-0x009f]
pnp 00:02: [io  0x00a4-0x00a5]
pnp 00:02: [io  0x00a8-0x00a9]
pnp 00:02: [io  0x00ac-0x00ad]
pnp 00:02: [io  0x00b0-0x00b5]
pnp 00:02: [io  0x00b8-0x00b9]
pnp 00:02: [io  0x00bc-0x00bd]
pnp 00:02: [io  0x0290-0x029f]
pnp 00:02: [io  0x04d0-0x04d1]
pnp 00:02: [io  0x0800-0x080f]
pnp 00:02: [io  0x1000-0x107f]
pnp 00:02: [io  0x1180-0x11bf]
pnp 00:02: [io  0xfe00]
pnp 00:02: [mem 0xe0000000-0xefffffff]
pnp 00:02: [mem 0xfc000000-0xfcffffff]
pnp 00:02: [mem 0xfee00000-0xfeefffff]
pnp 00:02: [mem 0xfe800000-0xfe9fffff]
pnp 00:02: [mem 0xfeb00000-0xfebfffff]
pnp 00:02: [mem 0xfe710000-0xfe711fff]
pnp 00:02: [mem 0xfed20000-0xfed3ffff]
pnp 00:02: [mem 0xfed45000-0xfed8ffff]
system 00:02: [io  0x0290-0x029f] has been reserved
system 00:02: [io  0x04d0-0x04d1] has been reserved
system 00:02: [io  0x0800-0x080f] has been reserved
system 00:02: [io  0x1000-0x107f] has been reserved
system 00:02: [io  0x1180-0x11bf] has been reserved
system 00:02: [io  0xfe00] has been reserved
system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
system 00:02: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:02: [mem 0xfe800000-0xfe9fffff] has been reserved
system 00:02: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:02: [mem 0xfe710000-0xfe711fff] has been reserved
system 00:02: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:02: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io  0x0000-0x001f]
pnp 00:03: [io  0x0081-0x0091]
pnp 00:03: [io  0x0093-0x009f]
pnp 00:03: [io  0x00c0-0x00df]
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [io  0x00f0-0x00fe]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [irq 0 disabled]
pnp 00:05: [irq 8]
pnp 00:05: [mem 0xfed00000-0xfed003ff]
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:06: [io  0x0070-0x0071]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io  0x0061]
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:08: [io  0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io  0x03f0-0x03f5]
pnp 00:09: [io  0x03f7]
pnp 00:09: [irq 6]
pnp 00:09: [dma 2]
pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:16.0: BAR 0: assigned [mem 0xd4200000-0xd4203fff 64bit]
pci 0000:00:16.1: BAR 0: assigned [mem 0xd4204000-0xd4207fff 64bit]
pci 0000:00:16.2: BAR 0: assigned [mem 0xd4208000-0xd420bfff 64bit]
pci 0000:00:16.3: BAR 0: assigned [mem 0xd420c000-0xd420ffff 64bit]
pci 0000:00:16.4: BAR 0: assigned [mem 0xd4210000-0xd4213fff 64bit]
pci 0000:00:16.5: BAR 0: assigned [mem 0xd4214000-0xd4217fff 64bit]
pci 0000:00:16.6: BAR 0: assigned [mem 0xd4218000-0xd421bfff 64bit]
pci 0000:00:16.7: BAR 0: assigned [mem 0xd421c000-0xd421ffff 64bit]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xd4500000-0xd46fffff 64bit pref]
pci 0000:00:1c.4: BAR 13: assigned [io  0x3000-0x3fff]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xd4700000-0xd48fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xd4900000-0xd4afffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x4000-0x4fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:02:00.0: BAR 6: assigned [mem 0xd3000000-0xd307ffff pref]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:03.0:   bridge window [mem 0xd2000000-0xd40fffff]
pci 0000:00:03.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.0:   bridge window [mem 0xd4700000-0xd48fffff]
pci 0000:00:1c.0:   bridge window [mem 0xd4900000-0xd4afffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 05-05]
pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.4:   bridge window [mem 0xd4100000-0xd41fffff]
pci 0000:00:1c.4:   bridge window [mem 0xd4500000-0xd46fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 06-06]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0000 -> 0003)
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfdffffff]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xd2000000-0xd40fffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0xd4700000-0xd48fffff]
pci_bus 0000:04: resource 2 [mem 0xd4900000-0xd4afffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xd4100000-0xd41fffff]
pci_bus 0000:05: resource 2 [mem 0xd4500000-0xd46fffff 64bit pref]
pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:06: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:06: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:06: resource 10 [mem 0xc0000000-0xfdffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 9940k freed
Simple Boot Flag at 0x47 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1435580914.436:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1686
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
ERST: Table is not found!
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2015-06-29 12:28:35 UTC (1435580915)
Initializing network drop monitor service
Freeing unused kernel memory: 424k freed
Write protecting the kernel text: 2864k
Write protecting the kernel read-only data: 1084k
NX-protecting the kernel data: 3280k
udevd[50]: starting version 175
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
SCSI subsystem initialized
usbcore: registered new device driver usb
tg3.c:v3.121 (November 2, 2011)
tg3 0000:05:00.0: setting latency timer to 64
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
uhci_hcd: USB Universal Host Controller Interface driver
libata version 3.00 loaded.
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd4404000
tg3 0000:05:00.0: eth0: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 00:24:7e:70:36:b4
tg3 0000:05:00.0: eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:05:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:05:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 16, io mem 0xd4405000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001820
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001840
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001860
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: irq 19, io base 0x000018a0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.3
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
FDC 0 is a post-1991 82077
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x18f0 ctl 0x18e4 bmdma 0x18d0 irq 17
ata2: SATA max UDMA/133 cmd 0x18e8 ctl 0x18e0 bmdma 0x18d8 irq 17
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x1c48 ctl 0x18fc bmdma 0x1c30 irq 18
ata4: SATA max UDMA/133 cmd 0x1c40 ctl 0x18f8 bmdma 0x1c38 irq 18
Refined TSC clocksource calibration: 2527.000 MHz.
Switching to clocksource tsc
ata3: SATA link down (SStatus 0 SControl 300)
usb 6-2: new low-speed USB device number 2 using uhci_hcd
usb 6-2: New USB device found, idVendor=04b3, idProduct=3025
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: USB NetVista Full Width Keyboard
usb 6-2: Manufacturer: CHICONY
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 7-2: new low-speed USB device number 2 using uhci_hcd
ata1.00: ATA-8: Hitachi HDS721050CLA360, JP2OA50E, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATAPI: HL-DT-STDVD-RAM GH40N, NX05, max UDMA/100
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDS72105 JP2O PQ: 0 ANSI: 5
scsi 0:0:1:0: CD-ROM            HL-DT-ST DVD-RAM GH40N    NX05 PQ: 0 ANSI: 5
usb 7-2: New USB device found, idVendor=17ef, idProduct=6019
usb 7-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 7-2: Product: Lenovo Optical USB Mouse
input: CHICONY USB NetVista Full Width Keyboard as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input0
generic-usb 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB NetVista Full Width Keyboard] on usb-0000:00:1d.1-2/input0
ata4: failed to resume link (SControl 0)
ata4: SATA link down (SStatus 0 SControl 0)
input: Lenovo Optical USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input1
generic-usb 0003:17EF:6019.0002: input,hidraw1: USB HID v1.11 Mouse [Lenovo Optical USB Mouse] on usb-0000:00:1d.2-2/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 >
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 0:0:1:0: Attached scsi generic sg1 type 5
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
udevd[359]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
tpm_tis 00:00: 1.2 TPM (device-id 0x1002, rev-id 2)
ACPI: Requesting acpi_cpufreq
iTCO_vendor_support: vendor-support=0
dca service started, version 1.12.1
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
EDAC MC: Ver: 2.1.0
input: PC Speaker as /devices/platform/pcspkr/input/input4
ioatdma: Intel(R) QuickData Technology Driver 4.00
ioatdma 0000:00:16.0: enabling device (0000 -> 0002)
ioatdma 0000:00:16.0: can't derive routing for PCI INT A
ioatdma 0000:00:16.0: PCI INT A: no GSI
ioatdma 0000:00:16.0: setting latency timer to 64
ioatdma 0000:00:16.0: irq 42 for MSI/MSI-X
ioatdma 0000:00:16.1: enabling device (0000 -> 0002)
ioatdma 0000:00:16.1: can't derive routing for PCI INT B
ioatdma 0000:00:16.1: PCI INT B: no GSI
ioatdma 0000:00:16.1: setting latency timer to 64
ioatdma 0000:00:16.1: irq 43 for MSI/MSI-X
ioatdma 0000:00:16.2: enabling device (0000 -> 0002)
ioatdma 0000:00:16.2: can't derive routing for PCI INT C
ioatdma 0000:00:16.2: PCI INT C: no GSI
ioatdma 0000:00:16.2: setting latency timer to 64
ioatdma 0000:00:16.2: irq 44 for MSI/MSI-X
ioatdma 0000:00:16.3: enabling device (0000 -> 0002)
ioatdma 0000:00:16.3: can't derive routing for PCI INT D
ioatdma 0000:00:16.3: PCI INT D: no GSI
ioatdma 0000:00:16.3: setting latency timer to 64
ioatdma 0000:00:16.3: irq 45 for MSI/MSI-X
ioatdma 0000:00:16.4: enabling device (0000 -> 0002)
ioatdma 0000:00:16.4: can't derive routing for PCI INT A
ioatdma 0000:00:16.4: PCI INT A: no GSI
ioatdma 0000:00:16.4: setting latency timer to 64
ioatdma 0000:00:16.4: irq 46 for MSI/MSI-X
ioatdma 0000:00:16.5: enabling device (0000 -> 0002)
ioatdma 0000:00:16.5: can't derive routing for PCI INT B
ioatdma 0000:00:16.5: PCI INT B: no GSI
ioatdma 0000:00:16.5: setting latency timer to 64
ioatdma 0000:00:16.5: irq 47 for MSI/MSI-X
ioatdma 0000:00:16.6: enabling device (0000 -> 0002)
ioatdma 0000:00:16.6: can't derive routing for PCI INT C
ioatdma 0000:00:16.6: PCI INT C: no GSI
ioatdma 0000:00:16.6: setting latency timer to 64
ioatdma 0000:00:16.6: irq 48 for MSI/MSI-X
ioatdma 0000:00:16.7: enabling device (0000 -> 0002)
ioatdma 0000:00:16.7: can't derive routing for PCI INT D
ioatdma 0000:00:16.7: PCI INT D: no GSI
ioatdma 0000:00:16.7: setting latency timer to 64
ioatdma 0000:00:16.7: irq 49 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
nouveau 0000:02:00.0: setting latency timer to 64
[drm] nouveau 0000:02:00.0: Detected an NVe0 generation card (0x0e73a0a2)
[drm] nouveau 0000:02:00.0: Checking PRAMIN for VBIOS
[drm] nouveau 0000:02:00.0: ... BIOS signature not found
[drm] nouveau 0000:02:00.0: Checking PROM for VBIOS
[drm] nouveau 0000:02:00.0: ... appears to be valid
[drm] nouveau 0000:02:00.0: Using VBIOS from PROM
[drm] nouveau 0000:02:00.0: BIT BIOS found
[drm] nouveau 0000:02:00.0: Bios version 80.07.c5.00
[drm] nouveau 0000:02:00.0: TMDS table version 2.0
[drm] nouveau 0000:02:00.0: MXM: no VBIOS data, nothing to do
[drm] nouveau 0000:02:00.0: DCB version 4.0
[drm] nouveau 0000:02:00.0: DCB outp 00: 01000f02 00020030
[drm] nouveau 0000:02:00.0: DCB outp 01: 02000f00 00000000
[drm] nouveau 0000:02:00.0: DCB outp 02: 02811fa6 0f420010
[drm] nouveau 0000:02:00.0: DCB outp 03: 02011f62 00020010
[drm] nouveau 0000:02:00.0: DCB conn 00: 00001030
[drm] nouveau 0000:02:00.0: DCB conn 01: 00002146
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0x7810
[drm] nouveau 0000:02:00.0: 0x767D: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0x807C
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0x64A1
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0x91B5
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0x91B6
[drm] nouveau 0000:02:00.0: 0x7739: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 5 at offset 0x9265
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 6 at offset 0x92CB
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0x92CA
[TTM] Zone  kernel: Available graphics memory: 432062 kiB
[TTM] Zone highmem: Available graphics memory: 2069282 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] nouveau 0000:02:00.0: Detected 1024MiB VRAM (DDR3)
mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:02:00.0: voltage table 0x50 unknown
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[drm] nouveau 0000:02:00.0: 2 available performance level(s)
[drm] nouveau 0000:02:00.0: 1: core 162MHz shader 324MHz memory 648MHz voltage 30mV
[drm] nouveau 0000:02:00.0: 3: core 445MHz shader 891MHz memory 1080MHz voltage 40mV
[drm] nouveau 0000:02:00.0: c:
[drm] nouveau 0000:02:00.0: allocated 1024x768 fb: 0xe0000, bo f7123200
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 1.0.0 20120316 for 0000:02:00.0 on minor 0
hda_codec: AD1988: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
hda_intel: Disabling MSI
snd_hda_intel 0000:02:00.1: setting latency timer to 64
tpm_tis 00:00: Detected an iTPM.
HDMI status: Codec=0 Pin=4 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input6
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input7
tpm_tis 00:00: Intel iTPM workaround enabled
tpm_tis 00:00: [Hardware Error]: Adjusting reported timeouts: A 1->1000us B 300->300000us C 1->1000us D 1->1000us
tpm_tis 00:00: Adjusting TPM timeout parameters.
Adding 8368124k swap on /dev/sda5.  Priority:-1 extents:1 across:8368124k 
EXT4-fs (sda1): re-mounted. Opts: (null)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
loop: module loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
lp: driver loaded but no devices found
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
ppdev: user-space parallel port driver
tg3 0000:05:00.0: irq 51 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:05:00.0: eth0: Link is up at 100 Mbps, half duplex
tg3 0000:05:00.0: eth0: Flow control is off for TX and off for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
usb 2-7: new high-speed USB device number 4 using ehci_hcd
usb 2-7: New USB device found, idVendor=8564, idProduct=1000
usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-7: Product: Mass Storage Device
usb 2-7: Manufacturer: JetFlash
usb 2-7: SerialNumber: 08H13SBMFMMUFPA6
Initializing USB Mass Storage driver...
scsi4 : usb-storage 2-7:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 4:0:0:0: Direct-Access     JetFlash Transcend 16GB   1100 PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 30851072 512-byte logical blocks: (15.7 GB/14.7 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdb1): using internal journal
EXT3-fs (sdb1): mounted filesystem with ordered data mode
usb 2-7: USB disconnect, device number 4
sd 4:0:0:0: [sdb] Synchronizing SCSI cache
sd 4:0:0:0: [sdb]  Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
usb 2-7: new high-speed USB device number 5 using ehci_hcd
usb 2-7: New USB device found, idVendor=8564, idProduct=1000
usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-7: Product: Mass Storage Device
usb 2-7: Manufacturer: JetFlash
usb 2-7: SerialNumber: 08H13SBMFMMUFPA6
scsi5 : usb-storage 2-7:1.0
scsi 5:0:0:0: Direct-Access     JetFlash Transcend 16GB   1100 PQ: 0 ANSI: 6
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdb] 30851072 512-byte logical blocks: (15.7 GB/14.7 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI removable disk
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdb1): using internal journal
EXT3-fs (sdb1): mounted filesystem with ordered data mode

Return To LLVMpipe System Information