dmesg - compress-7zip_test_configuration
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.8-100.fc20.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 4.8.3 20140911 (Red Hat 4.8.3-7) (GCC) ) #1 SMP Tue May 12 17:08:50 UTC 2015
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bc7b8fff] usable
BIOS-e820: [mem 0x00000000bc7b9000-0x00000000bc968fff] reserved
BIOS-e820: [mem 0x00000000bc969000-0x00000000bc978fff] ACPI data
BIOS-e820: [mem 0x00000000bc979000-0x00000000bd7d5fff] ACPI NVS
BIOS-e820: [mem 0x00000000bd7d6000-0x00000000beda7fff] reserved
BIOS-e820: [mem 0x00000000beda8000-0x00000000beda8fff] usable
BIOS-e820: [mem 0x00000000beda9000-0x00000000bedcbfff] ACPI NVS
BIOS-e820: [mem 0x00000000bedcc000-0x00000000bef1dfff] usable
BIOS-e820: [mem 0x00000000bef1e000-0x00000000bf5fcfff] reserved
BIOS-e820: [mem 0x00000000bf5fd000-0x00000000bf640fff] usable
BIOS-e820: [mem 0x00000000bf641000-0x00000000bfdf1fff] reserved
BIOS-e820: [mem 0x00000000bfdf2000-0x00000000bfdfffff] usable
BIOS-e820: [mem 0x00000000fe012000-0x00000000fe012fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec3ffff] reserved
BIOS-e820: [mem 0x00000000fecc0000-0x00000000fed7ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO FFFFFFFFFF/VT8611, BIOS O09KT11PUS 07/04/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BFE00000 mask FFFE00000 uncachable
3 base 100000000 mask FC0000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: update [mem 0xbfe00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbfe00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd890-0x000fd89f] mapped at [ffff8800000fd890]
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02027000, 0x02027fff] PGTABLE
BRK [0x02028000, 0x02028fff] PGTABLE
BRK [0x02029000, 0x02029fff] PGTABLE
init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[mem 0x13fe00000-0x13fffffff] page 2M
BRK [0x0202a000, 0x0202afff] PGTABLE
init_memory_mapping: [mem 0x120000000-0x13fdfffff]
[mem 0x120000000-0x13fdfffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbc7b8fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbc5fffff] page 2M
[mem 0xbc600000-0xbc7b8fff] page 4k
init_memory_mapping: [mem 0xbeda8000-0xbeda8fff]
[mem 0xbeda8000-0xbeda8fff] page 4k
BRK [0x0202b000, 0x0202bfff] PGTABLE
init_memory_mapping: [mem 0xbedcc000-0xbef1dfff]
[mem 0xbedcc000-0xbef1dfff] page 4k
BRK [0x0202c000, 0x0202cfff] PGTABLE
init_memory_mapping: [mem 0xbf5fd000-0xbf640fff]
[mem 0xbf5fd000-0xbf640fff] page 4k
init_memory_mapping: [mem 0xbfdf2000-0xbfdfffff]
[mem 0xbfdf2000-0xbfdfffff] page 4k
init_memory_mapping: [mem 0x100000000-0x11fffffff]
[mem 0x100000000-0x11fffffff] page 2M
RAMDISK: [mem 0x35cc8000-0x36e5bfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BC96F068 000054 (v01 LENOVO TC-03 00001110 AMI 00010013)
ACPI: FACP 0x00000000BC978660 00010C (v05 LENOVO TC-03 00001110 AMI 00010013)
ACPI: DSDT 0x00000000BC96F150 00950C (v02 LENOVO TC-03 00001110 INTL 20051117)
ACPI: FACS 0x00000000BD7CC080 000040
ACPI: FPDT 0x00000000BC978770 000044 (v01 LENOVO TC-03 00001110 AMI 00010013)
ACPI: MCFG 0x00000000BC9787B8 00003C (v01 LENOVO TC-03 00001110 MSFT 00000097)
ACPI: HPET 0x00000000BC9787F8 000038 (v01 LENOVO TC-03 00001110 AMI. 00000005)
ACPI: BGRT 0x00000000BC978830 000038 (v00 LENOVO TC-03 00001110 AMI 00010013)
ACPI: APIC 0x00000000BC978868 00006E (v03 LENOVO TC-03 00001110 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
NODE_DATA(0) allocated [mem 0x13ffe6000-0x13fff9fff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xbc7b8fff]
node 0: [mem 0xbeda8000-0xbeda8fff]
node 0: [mem 0xbedcc000-0xbef1dfff]
node 0: [mem 0xbf5fd000-0xbf640fff]
node 0: [mem 0xbfdf2000-0xbfdfffff]
node 0: [mem 0x100000000-0x13fffffff]
Initmem setup node 0 [mem 0x00001000-0x13fffffff]
On node 0 totalpages: 1034491
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12006 pages used for memmap
DMA32 zone: 768350 pages, LIFO batch:31
Normal zone: 4096 pages used for memmap
Normal zone: 262144 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 9, version 3, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 10, version 3, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbc7b9000-0xbc968fff]
PM: Registered nosave memory: [mem 0xbc969000-0xbc978fff]
PM: Registered nosave memory: [mem 0xbc979000-0xbd7d5fff]
PM: Registered nosave memory: [mem 0xbd7d6000-0xbeda7fff]
PM: Registered nosave memory: [mem 0xbeda9000-0xbedcbfff]
PM: Registered nosave memory: [mem 0xbef1e000-0xbf5fcfff]
PM: Registered nosave memory: [mem 0xbf641000-0xbfdf1fff]
PM: Registered nosave memory: [mem 0xbfe00000-0xfe011fff]
PM: Registered nosave memory: [mem 0xfe012000-0xfe012fff]
PM: Registered nosave memory: [mem 0xfe013000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec3ffff]
PM: Registered nosave memory: [mem 0xfec40000-0xfecbffff]
PM: Registered nosave memory: [mem 0xfecc0000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0xbfe00000-0xfe011fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:1024 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88013fc00000 s86784 r8192 d32000 u1048576
pcpu-alloc: s86784 r8192 d32000 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1018304
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 3971124K/4137964K available (7585K kernel code, 1183K rwdata, 3284K rodata, 1504K init, 1524K bss, 166840K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:65792 nr_irqs:512 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-1.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1733.445 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3466.89 BogoMIPS (lpj=1733445)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 0 MCE banks
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81ea1000 - ffffffff81ea8000)
ftrace: allocating 27664 entries in 109 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Centaur VIA Nano X2 C4350AL @ 1.6+ GHz (fam: 06, model: 0f, stepping: 0d)
Performance Events: no PMU driver, software events only.
NMI watchdog: disabled (cpu0): hardware events not enabled
x86: Booting SMP configuration:
.... node #0, CPUs: #1
mce: CPU supports 0 MCE banks
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (6933.78 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbc979000-0xbd7d5fff] (15060992 bytes)
PM: Registering ACPI NVS region [mem 0xbeda9000-0xbedcbfff] (143360 bytes)
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 9:15:15, date: 06/25/15
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Actual Package length (8) is larger than NumElements field (6), truncated
ACPI: Actual Package length (8) is larger than NumElements field (6), truncated
ACPI: Actual Package length (8) is larger than NumElements field (6), truncated
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1106:3456] type 00 class 0x060000
pci 0000:00:00.1: [1106:31b0] type 00 class 0x060000
pci 0000:00:00.2: [1106:31b1] type 00 class 0x060000
pci 0000:00:00.3: [1106:31b2] type 00 class 0x060000
pci 0000:00:00.4: [1106:31b3] type 00 class 0x060000
pci 0000:00:00.5: [1106:31b4] type 00 class 0x060000
pci 0000:00:00.6: [1106:31b5] type 00 class 0x060000
pci 0000:00:00.7: [1106:0709] type 00 class 0x060000
pci 0000:00:02.0: [1106:070a] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [1106:070b] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [1106:070e] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0f.0: [1106:9082] type 00 class 0x010601
pci 0000:00:0f.0: reg 0x20: [io 0xf0a0-0xf0bf]
pci 0000:00:0f.0: reg 0x24: [mem 0xfd206000-0xfd2063ff]
pci 0000:00:0f.0: PME# supported from D3hot
pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.0: reg 0x20: [io 0xf080-0xf09f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.1: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.2: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: System wakeup disabled by ACPI
pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.3: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: System wakeup disabled by ACPI
pci 0000:00:10.4: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: System wakeup disabled by ACPI
pci 0000:00:10.7: [1106:3104] type 00 class 0x0c0320
pci 0000:00:10.7: reg 0x10: [mem 0xfd205000-0xfd2050ff]
pci 0000:00:10.7: supports D1 D2
pci 0000:00:10.7: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.7: System wakeup disabled by ACPI
pci 0000:00:11.0: [1106:345b] type 00 class 0x060100
pci 0000:00:11.7: [1106:31b7] type 00 class 0x060000
pci 0000:00:12.0: [1106:9201] type 00 class 0x0c0330
pci 0000:00:12.0: reg 0x10: [mem 0xfd204000-0xfd204fff 64bit]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:13.0: [1106:31b8] type 01 class 0x060400
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [1106:3288] type 00 class 0x040300
pci 0000:00:14.0: reg 0x10: [mem 0xfd200000-0xfd203fff 64bit]
pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [1002:6778] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfd120000-0xfd13ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfd100000-0xfd11ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfd140000-0xfd143fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd100000-0xfd1fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfd000000-0xfd000fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xd1000000-0xd1003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfd000000-0xfd0fffff]
pci 0000:00:03.0: bridge window [mem 0xd1000000-0xd10fffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 03-04]
pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:06.0: bridge window [mem 0xfc000000-0xfcffffff]
pci 0000:00:06.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
pci 0000:00:13.0: PCI bridge to [bus 05]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 0F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbc7b9000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbeda9000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbef1e000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf641000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfe00000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: [mem 0xfecc0000-0xfed7ffff] could not be reserved
system 00:00: [mem 0xfe012000-0xfe012fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfed01000-0xfed010ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0a00-0x0a1f] has been reserved
system 00:02: [io 0x0a20-0x0a2f] has been reserved
system 00:02: [io 0x0a30-0x0a3f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 3]
pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x0400-0x041f] has been reserved
system 00:07: [mem 0xfec00000-0xfec3ffff] could not be reserved
system 00:07: [mem 0xff800000-0xffffffff] has been reserved
system 00:07: [mem 0xff800000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd100000-0xfd1fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfd000000-0xfd0fffff]
pci 0000:00:03.0: bridge window [mem 0xd1000000-0xd10fffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 03-04]
pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:06.0: bridge window [mem 0xfc000000-0xfcffffff]
pci 0000:00:06.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
pci 0000:00:13.0: PCI bridge to [bus 05]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfd100000-0xfd1fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfd000000-0xfd0fffff]
pci_bus 0000:02: resource 2 [mem 0xd1000000-0xd10fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfc000000-0xfcffffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: disabling DAC on VIA PCI bridge
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 18000K (ffff880035cc8000 - ffff880036e5c000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb87b9000-0xbc7b9000] (64MB) mapped at [ffff8800b87b9000-ffff8800bc7b8fff]
microcode: no support for this CPU vendor
futex hash table entries: 512 (order: 3, 32768 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1435223715.827:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:06.0:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
pciehp 0000:00:06.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:0f.0: version 3.0
ahci 0000:00:0f.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:0f.0: PCI: Disallowing DAC for device
ahci 0000:00:0f.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:0f.0: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc sxs boh
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m1024@0xfd206000 port 0xfd206100 irq 30
ata2: SATA max UDMA/133 abar m1024@0xfd206000 port 0xfd206180 irq 30
libphy: Fixed MDIO Bus: probed
xhci_hcd 0000:00:12.0: xHCI Host Controller
xhci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:12.0: PCI: Disallowing DAC for device
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.8-100.fc20.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:00:12.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci_hcd 0000:00:12.0: xHCI Host Controller
xhci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.8-100.fc20.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:00:12.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:10.7: EHCI Host Controller
ehci-pci 0000:00:10.7: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:10.7: debug port 1
ehci-pci 0000:00:10.7: irq 23, io mem 0xfd205000
ehci-pci 0000:00:10.7: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.8-100.fc20.x86_64 ehci_hcd
usb usb3: SerialNumber: 0000:00:10.7
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.0: detected 2 ports
uhci_hcd 0000:00:10.0: irq 20, io base 0x0000f080
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.19.8-100.fc20.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:10.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.1: detected 2 ports
uhci_hcd 0000:00:10.1: irq 22, io base 0x0000f060
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.19.8-100.fc20.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:10.1
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:10.2: detected 2 ports
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000f040
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.19.8-100.fc20.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:10.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:10.3: detected 2 ports
uhci_hcd 0000:00:10.3: irq 23, io base 0x0000f020
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.19.8-100.fc20.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:10.3
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.4: UHCI Host Controller
uhci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:10.4: detected 2 ports
uhci_hcd 0000:00:10.4: irq 20, io base 0x0000f000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.19.8-100.fc20.x86_64 uhci_hcd
usb usb8: SerialNumber: 0000:00:10.4
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 06af36eb7b28a5ade90b021e17e6aab2b65263aa'
registered taskstats version 1
Magic number: 3:551:273
usb usb1-port1: hash matches
tty tty10: hash matches
net lo: hash matches
rtc_cmos 00:05: setting system clock to 2015-06-25 09:15:16 UTC (1435223716)
PM: Hibernation image not present or could not be loaded.
usb 4-1: new low-speed USB device number 2 using uhci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: ATA-9: SAMSUNG MZ7TD128HAFV-000L1, DXT05L0Q, max UDMA/133
ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7TD128 5L0Q PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 4-1: New USB device found, idVendor=413c, idProduct=2107
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: Dell USB Entry Keyboard
usb 4-1: Manufacturer: Dell
input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:10.0/usb4/4-1/4-1:1.0/0003:413C:2107.0001/input/input6
hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:10.0-1/input0
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVD-RAM GHB0N, JE00, max UDMA/133
ata2.00: configured for UDMA/133
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GHB0N JE00 PQ: 0 ANSI: 5
tsc: Refined TSC clocksource calibration: 1733.333 MHz
sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/8x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Freeing unused kernel memory: 1504K (ffffffff81d29000 - ffffffff81ea1000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 596K (ffff88000176b000 - ffff880001800000)
Freeing unused kernel memory: 812K (ffff880001b35000 - ffff880001c00000)
systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd urandom read with 5 bits of entropy available
usb 4-2: new low-speed USB device number 3 using uhci_hcd
systemd[1]: Starting -.slice.
systemd[1]: Created slice -.slice.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Slices.
systemd[1]: Reached target Slices.
systemd[1]: Starting Timers.
systemd[1]: Reached target Timers.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Sockets.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
usb 4-2: New USB device found, idVendor=17ef, idProduct=6019
usb 4-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-2: Product: Lenovo Optical USB Mouse
input: Lenovo Optical USB Mouse as /devices/pci0000:00/0000:00:10.0/usb4/4-2/4-2:1.0/0003:17EF:6019.0002/input/input7
hid-generic 0003:17EF:6019.0002: input,hidraw1: USB HID v1.11 Mouse [Lenovo Optical USB Mouse] on usb-0000:00:10.0-2/input0
systemd-udevd[199]: starting version 208
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI: Disallowing DAC for device
r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc9000000a000, c0:3f:d5:7d:8b:57, XID 0c000800 IRQ 33
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
r8169 0000:02:00.0 p2p1: renamed from eth0
[drm] initializing kernel modesetting (CAICOS 0x1002:0x6778 0x1462:0xB497).
radeon 0000:01:00.0: PCI: Disallowing DAC for device
radeon: No suitable DMA available.
[drm] register mmio base: 0xFD120000
[drm] register mmio size: 131072
ATOM BIOS: C26411
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 1996032 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading CAICOS Microcode
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88003610fc00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88003610fc0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010ab2118
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
Switched to clocksource tsc
systemd-udevd[205]: renamed network interface eth0 to p2p1
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] VGA-1
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xC0475000
[drm] vram apper at 0xC0000000
[drm] size 7299072
[drm] fb depth is 24
[drm] pitch is 6912
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 0
PM: Starting manual resume from disk
PM: Hibernation image partition 8:3 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda2): INFO: recovery required on readonly filesystem
EXT4-fs (sda2): write access will be enabled during recovery
random: nonblocking pool is initialized
EXT4-fs (sda2): orphan cleanup on readonly fs
EXT4-fs (sda2): 52 orphan inodes deleted
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[94]: Received SIGTERM
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit: type=1404 audit(1435223719.966:2): selinux=0 auid=4294967295 ses=4294967295
systemd[1]: RTC configured in localtime, applying delta of 480 minutes to system time.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
systemd-udevd[369]: starting version 208
EXT4-fs (sda2): re-mounted. Opts: (null)
wmi: Mapper loaded
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Adding 8387580k swap on /dev/sda3. Priority:-1 extents:1 across:8387580k SSFS
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VIA RNG detected
systemd-journald[359]: Received request to flush runtime journal from PID 1
audit: type=1305 audit(1435194920.967:3): audit_pid=440 old=0 auid=4294967295 ses=4294967295 res=1
alg: skcipher: Chunk test 1 failed on encryption at page 0 for ecb-aes-padlock
00000000: 71 73 f7 db 24 93 21 6d 61 1e bb 63 42 79 db 64
00000010: 6f 82 c0 ca a3 9b fa 0b d9 08 c7 4a 90 ae 8f 5f
00000020: 5e 06 f0 5f 31 51 18 37 45 d7 ca 3a fd 6c 3f e1
00000030: dd 8d 22 65 2b 00 50 ce ba 28 67 d7 ce 0e 0d ea
00000040: 78 69 7f ae 8f 8b 69 37 75 e0 dc 96 e0 b7 f4 09
00000050: cb 6d a2 fb da af 09 f8 81 82 27 fa 45 9c 29 a4
00000060: 22 8b 78 69 5b 46 f9 39 1b cc f9 1d 09 eb bc 5c
00000070: 41 72 51 97 1d 07 49 a0 1b 8e 65 4b b2 6a 12 03
00000080: 6a 60 95 ac bd ac 1a 64 de 5a a5 f0 83 2f cb ca
00000090: 22 74 a6 6c 9b 73 ce 3f e1 8b 22 17 59 0c 47 89
000000a0: 33 a1 d6 47 03 19 4f a8 67 69 f0 5b f0 20 ad 06
000000b0: 27 81 92 d8 c5 ba 98 12 be 24 b5 2f 75 02 c2 ad
000000c0: 12 2f 07 32 ee 39 af 64 05 8f b3 d4 eb 1b 46 6e
000000d0: d9 21 f9 c4 b7 c9 45 68 b4 a1 74 9f 82 47 eb cc
000000e0: bd 0a 14 95 0f 8b a8 2f 4b 1b a7 bf 82 a6 43 0c
000000f0: b9 39 4a a8 10 6f 50 7b 25 fb 26 81 e0 2f f0 96
00000100: 8d 8b ac 92 0f f6 ed 64 63 29 4c 8e 18 13 c5 bf
00000110: fc a0 d9 bf 7c 3a 0e 29 6f d1 6c 6f a5 da bf b1
00000120: 30 ea 44 2d c3 8f 16 e1 66 fa a3 21 3e fc 13 ca
00000130: f0 f6 f0 59 bd 8f 38 50 31 cb 69 3f 96 15 d6 f5
00000140: ae ff f6 aa 41 85 4c 10 58 e3 f9 44 e6 28 da 9a
00000150: dc 6a 80 34 73 97 1b c5 ca 26 16 77 0e 60 ab 89
00000160: 0f 04 27 bd ce 3e 71 b4 a0 d7 22 7e db eb 24 70
00000170: 42 71 51 78 70 b3 e0 3d 84 8e 8d 7b d0 6d ea 92
00000180: 11 08 42 4f e5 ad 26 92 d2 00 ae a8 e3 4b 37 47
00000190: 22 c1 95 c1 63 7f cb 03 f3 e3 d7 9d 60 c7 bc ea
000001a0: 35 a2 fd 45 52 39 13 6f c1 53 f3 53 df 33 84 d7
000001b0: d2 c8 37 b0 75 e3 41 46 b3 c7 83 2e 8a bb a4 e5
000001c0: 7f 3c fd 8b eb ea 63 bd b7 46 e7 bf 09 9c 0d 0f
000001d0: 33 84 aa 1c 8d 29 b4 ac 4f ad e6 89
padlock_aes: Using VIA PadLock ACE for AES algorithm.
padlock_sha: Using VIA PadLock ACE for SHA1/SHA256 algorithms.
snd_hda_intel 0000:00:14.0: Force to non-snoop mode
snd_hda_intel 0000:00:14.0: PCI: Disallowing DAC for device
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: PCI: Disallowing DAC for device
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
sound hdaudioC0D0: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x1e/0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Line=0x1a
input: HDA VIA VT82xx Front Mic as /devices/pci0000:00/0000:00:14.0/sound/card0/input9
input: HDA VIA VT82xx Rear Mic as /devices/pci0000:00/0000:00:14.0/sound/card0/input10
input: HDA VIA VT82xx Line as /devices/pci0000:00/0000:00:14.0/sound/card0/input11
input: HDA VIA VT82xx Line Out Front as /devices/pci0000:00/0000:00:14.0/sound/card0/input12
input: HDA VIA VT82xx Line Out Surround as /devices/pci0000:00/0000:00:14.0/sound/card0/input13
input: HDA VIA VT82xx Line Out CLFE as /devices/pci0000:00/0000:00:14.0/sound/card0/input14
input: HDA VIA VT82xx Front Headphone as /devices/pci0000:00/0000:00:14.0/sound/card0/input15
ppdev: user-space parallel port driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
r8169 0000:02:00.0 p2p1: link down
r8169 0000:02:00.0 p2p1: link down
IPv6: ADDRCONF(NETDEV_UP): p2p1: link is not ready
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
r8169 0000:02:00.0 p2p1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): p2p1: link becomes ready
fuse init (API version 7.23)
usb 3-8: new high-speed USB device number 4 using ehci-pci
usb 3-8: New USB device found, idVendor=1567, idProduct=8902
usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-8: Product: DT 101 G2
usb 3-8: Manufacturer: Kingston
usb 3-8: SerialNumber: 500838A777D44565
usb-storage 3-8:1.0: USB Mass Storage device detected
scsi host2: usb-storage 3-8:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 2:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 4
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdb] 15577063 512-byte logical blocks: (7.97 GB/7.42 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] No Caching mode page found
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb4
sd 2:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb4): Invalid FSINFO signature: 0x00000000, 0x00000000 (sector = 1)
FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
FAT-fs (sdb4): Invalid FSINFO signature: 0x00000000, 0x00000000 (sector = 1)
usb 3-8: USB disconnect, device number 4
usb 4-1: USB disconnect, device number 2
usb 4-2: USB disconnect, device number 3
usb 7-2: new low-speed USB device number 2 using uhci_hcd
usb 7-2: New USB device found, idVendor=17ef, idProduct=6019
usb 7-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 7-2: Product: Lenovo Optical USB Mouse
input: Lenovo Optical USB Mouse as /devices/pci0000:00/0000:00:10.3/usb7/7-2/7-2:1.0/0003:17EF:6019.0003/input/input16
hid-generic 0003:17EF:6019.0003: input,hidraw0: USB HID v1.11 Mouse [Lenovo Optical USB Mouse] on usb-0000:00:10.3-2/input0
usb 3-1: new high-speed USB device number 7 using ehci-pci
usb 3-1: New USB device found, idVendor=1567, idProduct=8902
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: DT 101 G2
usb 3-1: Manufacturer: Kingston
usb 3-1: SerialNumber: 500838A777D44565
usb-storage 3-1:1.0: USB Mass Storage device detected
scsi host3: usb-storage 3-1:1.0
scsi 3:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 4
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdb] 15577063 512-byte logical blocks: (7.97 GB/7.42 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 3:0:0:0: [sdb] No Caching mode page found
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb4
sd 3:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb4): Invalid FSINFO signature: 0x00000000, 0x00000000 (sector = 1)
FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
FAT-fs (sdb4): Invalid FSINFO signature: 0x00000000, 0x00000000 (sector = 1)
usb 3-1: USB disconnect, device number 7
usb 7-2: USB disconnect, device number 2
usb 6-1: new low-speed USB device number 2 using uhci_hcd
usb 6-1: New USB device found, idVendor=17ef, idProduct=6019
usb 6-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 6-1: Product: Lenovo Optical USB Mouse
input: Lenovo Optical USB Mouse as /devices/pci0000:00/0000:00:10.2/usb6/6-1/6-1:1.0/0003:17EF:6019.0004/input/input17
hid-generic 0003:17EF:6019.0004: input,hidraw0: USB HID v1.11 Mouse [Lenovo Optical USB Mouse] on usb-0000:00:10.2-1/input0
usb 6-2: new low-speed USB device number 3 using uhci_hcd
usb 6-2: New USB device found, idVendor=413c, idProduct=2107
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: Dell USB Entry Keyboard
usb 6-2: Manufacturer: Dell
input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:10.2/usb6/6-2/6-2:1.0/0003:413C:2107.0005/input/input18
hid-generic 0003:413C:2107.0005: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:10.2-2/input0
ahci 0000:00:0f.0: swiotlb buffer is full (sz: 65536 bytes)
DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:00:0f.0
ahci 0000:00:0f.0: swiotlb buffer is full (sz: 65536 bytes)
DMA: Out of SW-IOMMU space for 65536 bytes at device 0000:00:0f.0
ata1.00: exception Emask 0x0 SAct 0x180000 SErr 0x0 action 0x0
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/80:98:c0:ec:3d/4a:00:00:00:00/40 tag 19 ncq 9764864 out
res 40/00:78:d0:b6:3c/00:00:00:00:00/40 Emask 0x40 (internal error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/80:a0:40:37:3e/4a:00:00:00:00/40 tag 20 ncq 9764864 out
res 40/00:78:d0:b6:3c/00:00:00:00:00/40 Emask 0x40 (internal error)
ata1.00: status: { DRDY }
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
ata1: EH complete
TCP: lp registered