dmesg - awe-hp2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-33-generic (buildd@brownie) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #44-Ubuntu SMP Thu Mar 12 12:25:57 UTC 2015 (Ubuntu 3.16.0-33.44-generic 3.16.7-ckt7)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
Disabled fast string operations
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000ef000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000075b43fff] usable
BIOS-e820: [mem 0x0000000075b44000-0x0000000075b45fff] reserved
BIOS-e820: [mem 0x0000000075b46000-0x000000007696ffff] usable
BIOS-e820: [mem 0x0000000076970000-0x000000007697ffff] ACPI NVS
BIOS-e820: [mem 0x0000000076980000-0x00000000790bafff] usable
BIOS-e820: [mem 0x00000000790bb000-0x00000000792bafff] ACPI NVS
BIOS-e820: [mem 0x00000000792bb000-0x000000007aa92fff] usable
BIOS-e820: [mem 0x000000007aa93000-0x000000007aa9afff] reserved
BIOS-e820: [mem 0x000000007aa9b000-0x000000007aabefff] usable
BIOS-e820: [mem 0x000000007aabf000-0x000000007aacefff] reserved
BIOS-e820: [mem 0x000000007aacf000-0x000000007abcefff] ACPI NVS
BIOS-e820: [mem 0x000000007abcf000-0x000000007abfefff] ACPI data
BIOS-e820: [mem 0x000000007abff000-0x000000007abfffff] usable
BIOS-e820: [mem 0x000000007ac00000-0x000000007effffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Hewlett-Packard HP EliteBook 6930p /30DB, BIOS 68PCU Ver. F.0F 03/05/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7ac00 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFE00000 mask FFFE00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 07F000000 mask FFF000000 uncachable
3 base 076970000 mask FFFFF0000 uncachable
4 disabled
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x021fffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37400000-0x375fffff]
[mem 0x37400000-0x375fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x373fffff]
[mem 0x34000000-0x373fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37600000-0x377fdfff]
[mem 0x37600000-0x377fdfff] page 4k
BRK [0x01c08000, 0x01c08fff] PGTABLE
BRK [0x01c09000, 0x01c09fff] PGTABLE
RAMDISK: [mem 0x34a54000-0x36521fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000F6810 000024 (v02 HPQOEM)
ACPI: XSDT 0x7ABFE120 00008C (v01 HPQOEM SLIC-MPC 0000000F 01000013)
ACPI: FACP 0x7ABFC000 0000F4 (v03 HPQOEM 30DB 0000000F HP 00000001)
ACPI: DSDT 0x7ABDD000 019523 (v01 HPQOEM 30DB 00000001 INTL 20060912)
ACPI: FACS 0x7AB9D000 000040
ACPI: HPET 0x7ABFB000 000038 (v01 HPQOEM 30DB 00000001 HP 00000001)
ACPI: APIC 0x7ABFA000 000084 (v01 HPQOEM 30DB 00000001 HP 00000001)
ACPI: MCFG 0x7ABF9000 00003C (v01 HPQOEM 30DB 00000001 HP 00000001)
ACPI: TCPA 0x7ABF7000 000032 (v02 HPQOEM 30DB 00000000 HP 00000001)
ACPI: SSDT 0x7ABDC000 00064F (v01 HPQOEM SataPri 00001000 INTL 20060912)
ACPI: SSDT 0x7ABDB000 00069C (v01 HPQOEM SataSec 00001000 INTL 20060912)
ACPI: SLIC 0x7ABD8000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: DMAR 0x7ABD7000 0000C0 (v01 ? 00000001 00000000)
ACPI: ASF! 0x7ABF8000 000095 (v32 HPQOEM 30DB 00000001 HP 00000001)
ACPI: SSDT 0x7ABD6000 00066C (v01 PmRef CpuPm 00003000 INTL 20060912)
ACPI: SSDT 0x7ABD5000 000288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
ACPI: SSDT 0x7ABD4000 000225 (v01 PmRef ApTst 00003000 INTL 20060912)
ACPI: Local APIC address 0xfee00000
1076MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
BRK [0x01c0a000, 0x01c0afff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x377fdfff]
HighMem [mem 0x377fe000-0x7abfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x75b43fff]
node 0: [mem 0x75b46000-0x7696ffff]
node 0: [mem 0x76980000-0x790bafff]
node 0: [mem 0x792bb000-0x7aa92fff]
node 0: [mem 0x7aa9b000-0x7aabefff]
node 0: [mem 0x7abff000-0x7abfffff]
On node 0 totalpages: 501828
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3998 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 223230 pages, LIFO batch:31
HighMem zone: 2153 pages used for memmap
HighMem zone: 274600 pages, LIFO batch:31
Using APIC driver default
Reserving Intel graphics stolen memory at 0x7b000000-0x7effffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000eefff]
PM: Registered nosave memory: [mem 0x000ef000-0x000fffff]
e820: [mem 0x7f000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f679f000 s35840 r0 d21504 u57344
pcpu-alloc: s35840 r0 d21504 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 500052
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at /build/buildd/linux-3.16.0/drivers/iommu/dmar.c:760 warn_invalid_dmar+0x63/0x75()
Your BIOS is broken; DMAR reported at address 0!
BIOS vendor: Hewlett-Packard; Ver: 68PCU Ver. F.0F; Product Version: F.0F
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 3.16.0-33-generic #44-Ubuntu
Hardware name: Hewlett-Packard HP EliteBook 6930p /30DB, BIOS 68PCU Ver. F.0F 03/05/2009
00000000 00000000 c19a3f00 c16bfb9a c19a3f44 c19a3f34 c105ef12 c194bdb4
c19a3f64 00000000 c194be1c 000002f8 c16c1336 000002f8 c16c1336 c18e5baf
00000000 00000000 c19a3f4c c105efa2 0000000b c19a3f44 c194bdb4 c19a3f64
Call Trace:
[] dump_stack+0x41/0x52
[] warn_slowpath_common+0x82/0xa0
[] ? warn_invalid_dmar+0x63/0x75
[] ? warn_invalid_dmar+0x63/0x75
[] warn_slowpath_fmt_taint+0x32/0x40
[] warn_invalid_dmar+0x63/0x75
[] detect_intel_iommu+0x79/0x193
[] pci_iommu_alloc+0x3b/0x5a
[] mem_init+0x14/0x19c
[] start_kernel+0x1bb/0x3c2
[] i386_start_kernel+0x82/0x86
---[ end trace adb5c6a95d4529fc ]---
Initializing HighMem for node 0 (000377fe:0007ac00)
Initializing Movable for node 0 (00000000:00000000)
Memory: 1949900K/2007312K available (6945K kernel code, 693K rwdata, 2912K rodata, 852K init, 796K bss, 57412K reserved, 1098400K highmem)
virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xff800000 - 0xffa00000 (2048 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1a51000 - 0xc1b26000 ( 852 kB)
.data : 0xc16c8870 - 0xc1a4f4c0 (3611 kB)
.text : 0xc1000000 - 0xc16c8870 (6946 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f4408000 soft=f440a000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 4194304 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2260.988 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.97 BogoMIPS (lpj=9043952)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 36K (c1b26000 - c1b2f000)
ftrace: allocating 28656 entries in 56 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz (fam: 06, model: 17, stepping: 06)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
CPU 1 irqstacks, hard=f3d6a000 soft=f3d6c000
x86: Booting SMP configuration:
.... node #0, CPUs: #1
Initializing CPU#1
CPU1: Thermal monitoring handled by SMI
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (9043.95 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x76970000-0x7697ffff] (65536 bytes)
PM: Registering ACPI NVS region [mem 0x790bb000-0x792bafff] (2097152 bytes)
PM: Registering ACPI NVS region [mem 0x7aacf000-0x7abcefff] (1048576 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 18:35:53, date: 06/04/15
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xF3D72C00 000275 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xF3EE0000 00057B (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xF3E27E00 0001D7 (v01 PmRef ApIst 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xF3E17780 00008D (v01 PmRef ApCst 00003000 INTL 20060912)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [APPR] (off)
ACPI: Power Resource [COMP] (on)
ACPI: Power Resource [LPP] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x7f000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x7168-0x716f]
pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0x90400000-0x904fffff 64bit]
pci 0000:00:03.0: [8086:2a44] type 00 class 0x078000
pci 0000:00:03.0: reg 0x10: [mem 0x98826800-0x9882680f 64bit]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: [8086:2a46] type 00 class 0x010185
pci 0000:00:03.2: reg 0x10: [io 0x7160-0x7167]
pci 0000:00:03.2: reg 0x14: [io 0x7184-0x7187]
pci 0000:00:03.2: reg 0x18: [io 0x7158-0x715f]
pci 0000:00:03.2: reg 0x1c: [io 0x7180-0x7183]
pci 0000:00:03.2: reg 0x20: [io 0x7120-0x712f]
pci 0000:00:03.3: [8086:2a47] type 00 class 0x070002
pci 0000:00:03.3: reg 0x10: [io 0x7150-0x7157]
pci 0000:00:03.3: reg 0x14: [mem 0x98825000-0x98825fff]
pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0x98800000-0x9881ffff]
pci 0000:00:19.0: reg 0x14: [mem 0x98824000-0x98824fff]
pci 0000:00:19.0: reg 0x18: [io 0x70c0-0x70df]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x70a0-0x70bf]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x7080-0x709f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0x7060-0x707f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0x98826400-0x988267ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0x98820000-0x98823fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x7040-0x705f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x7020-0x703f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x7000-0x701f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0x98826000-0x988263ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018a
pci 0000:00:1f.2: reg 0x10: [io 0x7148-0x714f]
pci 0000:00:1f.2: reg 0x14: [io 0x717c-0x717f]
pci 0000:00:1f.2: reg 0x18: [io 0x7140-0x7147]
pci 0000:00:1f.2: reg 0x1c: [io 0x7178-0x717b]
pci 0000:00:1f.2: reg 0x20: [io 0x7110-0x711f]
pci 0000:00:1f.2: reg 0x24: [io 0x7100-0x710f]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.5: [8086:292d] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0x7138-0x713f]
pci 0000:00:1f.5: reg 0x14: [io 0x7174-0x7177]
pci 0000:00:1f.5: reg 0x18: [io 0x7130-0x7137]
pci 0000:00:1f.5: reg 0x1c: [io 0x7170-0x7173]
pci 0000:00:1f.5: reg 0x20: [io 0x70f0-0x70ff]
pci 0000:00:1f.5: reg 0x24: [io 0x70e0-0x70ef]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0x98700000-0x987fffff]
pci 0000:02:00.0: [14e4:4315] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0x98600000-0x98603fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0x98600000-0x986fffff]
pci 0000:00:1c.2: PCI bridge to [bus 03-43]
pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff]
pci 0000:00:1c.2: bridge window [mem 0x94600000-0x985fffff]
pci 0000:00:1c.4: PCI bridge to [bus 44-84]
pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
pci 0000:00:1c.4: bridge window [mem 0x90600000-0x945fffff]
pci 0000:85:09.0: [1180:0832] type 00 class 0x0c0010
pci 0000:85:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
pci 0000:85:09.0: MMC cards are now supported by standard SDHCI controller
pci 0000:85:09.0: reg 0x10: [mem 0x90501000-0x905017ff]
pci 0000:85:09.0: supports D1 D2
pci 0000:85:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:85:09.1: [1180:0822] type 00 class 0x080500
pci 0000:85:09.1: reg 0x10: [mem 0x90501900-0x905019ff]
pci 0000:85:09.1: supports D1 D2
pci 0000:85:09.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:85:09.2: [1180:0476] type 02 class 0x060700
pci 0000:85:09.2: reg 0x10: [mem 0x90500000-0x90500fff]
pci 0000:85:09.2: supports D1 D2
pci 0000:85:09.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 85-86] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1e.0: bridge window [mem 0x90500000-0x905fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x7f000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfedfffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
pci_bus 0000:86: busn_res: can not insert [bus 86-ff] under [bus 85-86] (conflicts with (null) [bus 85-86])
pci_bus 0000:86: busn_res: [bus 86-ff] end is updated to 89
pci_bus 0000:86: busn_res: can not insert [bus 86-89] under [bus 85-86] (conflicts with (null) [bus 85-86])
pci_bus 0000:86: [bus 86-89] partially hidden behind transparent bridge 0000:85 [bus 85-86]
pci 0000:00:1e.0: bridge has subordinate 86 but max busn 89
pci_bus 0000:00: on NUMA node 0
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x75b44000-0x77ffffff]
e820: reserve RAM buffer [mem 0x76970000-0x77ffffff]
e820: reserve RAM buffer [mem 0x790bb000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7aa93000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7aabf000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7ac00000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
system 00:03: [io 0x0200-0x027f] has been reserved
system 00:03: [io 0x1000-0x1003] has been reserved
system 00:03: [io 0x1010-0x101f] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0x0400-0x047f] could not be reserved
system 00:03: [io 0x0500-0x057f] has been reserved
system 00:03: [io 0xef80-0xef9f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: Plug and Play ACPI device, IDs SYN0147 SYN0100 SYN0002 PNP0f13 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-43] add_size 200000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 44-84] add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0x7f000000-0x7f1fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0x7f200000-0x7f3fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0x7f400000-0x7f5fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0x7f600000-0x7f7fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x8000-0x8fff]
pci 0000:00:1c.1: BAR 13: assigned [io 0x9000-0x9fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:1c.0: bridge window [mem 0x98700000-0x987fffff]
pci 0000:00:1c.0: bridge window [mem 0x7f000000-0x7f1fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.1: bridge window [mem 0x98600000-0x986fffff]
pci 0000:00:1c.1: bridge window [mem 0x7f200000-0x7f3fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 03-43]
pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff]
pci 0000:00:1c.2: bridge window [mem 0x94600000-0x985fffff]
pci 0000:00:1c.2: bridge window [mem 0x7f400000-0x7f5fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 44-84]
pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
pci 0000:00:1c.4: bridge window [mem 0x90600000-0x945fffff]
pci 0000:00:1c.4: bridge window [mem 0x7f600000-0x7f7fffff 64bit pref]
pci 0000:85:09.2: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:85:09.2: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
pci 0000:85:09.2: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:85:09.2: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:85:09.2: BAR 15: assigned [mem 0x9c000000-0x9fffffff pref]
pci 0000:85:09.2: BAR 16: assigned [mem 0xa0000000-0xa3ffffff]
pci 0000:85:09.2: BAR 13: assigned [io 0x2000-0x20ff]
pci 0000:85:09.2: BAR 14: assigned [io 0x2400-0x24ff]
pci 0000:85:09.2: CardBus bridge to [bus 86-89]
pci 0000:85:09.2: bridge window [io 0x2000-0x20ff]
pci 0000:85:09.2: bridge window [io 0x2400-0x24ff]
pci 0000:85:09.2: bridge window [mem 0x9c000000-0x9fffffff pref]
pci 0000:85:09.2: bridge window [mem 0xa0000000-0xa3ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 85-86]
pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1e.0: bridge window [mem 0x90500000-0x905fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x7f000000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:01: resource 1 [mem 0x98700000-0x987fffff]
pci_bus 0000:01: resource 2 [mem 0x7f000000-0x7f1fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:02: resource 1 [mem 0x98600000-0x986fffff]
pci_bus 0000:02: resource 2 [mem 0x7f200000-0x7f3fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x5000-0x6fff]
pci_bus 0000:03: resource 1 [mem 0x94600000-0x985fffff]
pci_bus 0000:03: resource 2 [mem 0x7f400000-0x7f5fffff 64bit pref]
pci_bus 0000:44: resource 0 [io 0x3000-0x4fff]
pci_bus 0000:44: resource 1 [mem 0x90600000-0x945fffff]
pci_bus 0000:44: resource 2 [mem 0x7f600000-0x7f7fffff 64bit pref]
pci_bus 0000:85: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:85: resource 1 [mem 0x90500000-0x905fffff]
pci_bus 0000:85: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:85: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:85: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:85: resource 7 [mem 0x7f000000-0xdfffffff]
pci_bus 0000:85: resource 8 [mem 0xf0000000-0xfedfffff]
pci_bus 0000:85: resource 9 [mem 0xfee01000-0xffffffff]
pci_bus 0000:86: resource 0 [io 0x2000-0x20ff]
pci_bus 0000:86: resource 1 [io 0x2400-0x24ff]
pci_bus 0000:86: resource 2 [mem 0x9c000000-0x9fffffff pref]
pci_bus 0000:86: resource 3 [mem 0xa0000000-0xa3ffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 27448K (f4a54000 - f6522000)
microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1433442954.160:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 1716
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.2:pcie04: Slot #2 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.4:pcie04: Slot #4 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0x80000000, mapped to 0xf8080000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
ACPI: AC Adapter [AC] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [DTSZ] (64 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [BATZ] (28 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [CPUZ] (66 C)
thermal LNXTHERM:03: registered as thermal_zone3
ACPI: Thermal Zone [LOCZ] (35 C)
thermal LNXTHERM:04: registered as thermal_zone4
ACPI: Thermal Zone [SKNZ] (49 C)
GHES: HEST is not enabled!
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
isapnp: Scanning for PnP cards...
0000:00:03.3: ttyS4 at I/O 0x7150 (irq = 17, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel GM45 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 65536K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
tpm_tis 00:01: [Hardware Error]: Adjusting reported timeouts: A 750->750000us B 2000->2000000us C 750->750000us D 750->750000us
tpm_tis 00:01: Adjusting TPM timeout parameters.
isapnp: No Plug & Play device found
tpm_tis 00:01: TPM is disabled/deactivated (0x7)
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x7110 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x7118 irq 15
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x7138 ctl 0x7174 bmdma 0x70f0 irq 18
ata4: SATA max UDMA/133 cmd 0x7130 ctl 0x7170 bmdma 0x70f8 irq 18
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 19, io mem 0x98826400
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-33-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 20, io mem 0x98826000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-33-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000070a0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-33-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 17, io base 0x00007080
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-33-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 18, io base 0x00007060
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.0-33-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00007040
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.16.0-33-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 22, io base 0x00007020
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.16.0-33-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00007000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.16.0-33-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: c4bc0227a8f54e9e2d9beaeee396f08bbf31775a'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
tpm_tis 00:01: A TPM error (7) occurred attempting to read a pcr value
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 3:239:594
rtc_cmos 00:04: setting system clock to 2015-06-04 18:35:56 UTC (1433442956)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: SanDisk SDSSDXP240G, R1311, max UDMA/133
ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDXP2 1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: ATAPI: Optiarc DVD RW AD-7561S, AH03, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7561S AH03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Freeing unused kernel memory: 852K (c1a51000 - c1b26000)
Write protecting the kernel text: 6948k
Write protecting the kernel read-only data: 2916k
NX-protecting the kernel data: 5340k
systemd-udevd[110]: starting version 208
random: systemd-udevd urandom read with 16 bits of entropy available
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
pata_acpi 0000:00:03.2: enabling device (0000 -> 0001)
[drm] Initialized drm 1.1.0 20060810
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
wmi: Mapper loaded
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:85:09.1: SDHCI controller found [1180:0822] (rev 25)
sdhci-pci 0000:85:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
sdhci-pci 0000:85:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: SDHCI controller on PCI [0000:85:09.1] using DMA
usb 1-4: new high-speed USB device number 3 using ehci-pci
firewire_ohci 0000:85:09.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:24:81:02:a2:a5
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1052FF-0FF
[drm] Memory usable by graphics device = 2048M
checking generic (80000000 300000) vs hw (80000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
i915 0000:00:02.0: irq 45 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 1-4: New USB device found, idVendor=0424, idProduct=2514
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
usb 4-1: new full-speed USB device number 2 using uhci_hcd
------------[ cut here ]------------
WARNING: CPU: 0 PID: 116 at /build/buildd/linux-3.16.0/drivers/gpu/drm/i915/intel_display.c:861 intel_wait_for_vblank+0x1a0/0x1f0 [i915]()
vblank wait timed out
Modules linked in: psmouse firewire_ohci firewire_core i915(+) sdhci_pci crc_itu_t sdhci wmi video i2c_algo_bit drm_kms_helper e1000e drm pata_acpi ptp pps_core
CPU: 0 PID: 116 Comm: systemd-udevd Tainted: G I 3.16.0-33-generic #44-Ubuntu
Hardware name: Hewlett-Packard HP EliteBook 6930p /30DB, BIOS 68PCU Ver. F.0F 03/05/2009
00000000 00000000 f61eb7d8 c16bfb9a f61eb81c f61eb80c c105ef12 f894b3bc
f61eb838 00000074 f89418dc 0000035d f88f05e0 0000035d f88f05e0 f5e00000
00070040 00000008 f61eb824 c105ef63 00000009 f61eb81c f894b3bc f61eb838
Call Trace:
[] dump_stack+0x41/0x52
[] warn_slowpath_common+0x82/0xa0
[] ? intel_wait_for_vblank+0x1a0/0x1f0 [i915]
[] ? intel_wait_for_vblank+0x1a0/0x1f0 [i915]
[] warn_slowpath_fmt+0x33/0x40
[] intel_wait_for_vblank+0x1a0/0x1f0 [i915]
[] intel_enable_tv+0x22/0x60 [i915]
[] i9xx_crtc_enable+0x36d/0x410 [i915]
[] __intel_set_mode+0x705/0x9a0 [i915]
[] ? drm_framebuffer_init+0x80/0x90 [drm]
[] intel_set_mode+0x23/0x40 [i915]
[] intel_get_load_detect_pipe+0x1dd/0x470 [i915]
[] intel_tv_detect+0x10a/0x5e0 [i915]
[] ? ftrace_raw_event_tick_stop+0xd0/0xd0
[] drm_helper_probe_single_connector_modes_merge_bits+0x268/0x350 [drm_kms_helper]
[] drm_helper_probe_single_connector_modes+0x17/0x20 [drm_kms_helper]
[] drm_fb_helper_probe_connector_modes.isra.3+0x41/0x60 [drm_kms_helper]
[] drm_fb_helper_initial_config+0x15a/0x490 [drm_kms_helper]
[] ? gen4_write32+0x49/0xc0 [i915]
[] ? gen4_read32+0x3f/0xc0 [i915]
[] ? intel_pin_and_fence_fb_obj+0x123/0x130 [i915]
[] intel_fbdev_initial_config+0x1c/0x20 [i915]
[] i915_driver_load+0xef8/0xf50 [i915]
[] ? i915_switcheroo_set_state+0x90/0x90 [i915]
[] ? cleanup_uevent_env+0x10/0x10
[] ? sysfs_add_file+0x23/0x30
[] ? get_device+0x14/0x30
[] ? klist_class_dev_get+0x12/0x20
[] ? klist_add_tail+0x34/0x40
[] ? device_add+0x1a4/0x600
[] ? kobject_set_name_vargs+0x42/0x60
[] ? drm_sysfs_device_add+0xba/0x100 [drm]
[] drm_dev_register+0x8e/0xd0 [drm]
[] drm_get_pci_dev+0x79/0x1d0 [drm]
[] ? kernfs_new_node+0x35/0x50
[] i915_pci_probe+0x35/0x60 [i915]
[] pci_device_probe+0x6f/0xd0
[] ? sysfs_create_link+0x25/0x50
[] driver_probe_device+0x93/0x3c0
[] ? __mutex_lock_slowpath+0xfc/0x1b0
[] ? __device_attach+0x40/0x40
[] __driver_attach+0x79/0x80
[] ? __device_attach+0x40/0x40
[] bus_for_each_dev+0x4f/0x80
[] driver_attach+0x1e/0x20
[] ? __device_attach+0x40/0x40
[] bus_add_driver+0x167/0x240
[] ? 0xf84b2fff
[] ? 0xf84b2fff
[] driver_register+0x5d/0xf0
[] __pci_register_driver+0x33/0x40
[] drm_pci_init+0xed/0x110 [drm]
[] ? 0xf84b2fff
[] i915_init+0x83/0x85 [i915]
[] do_one_initcall+0xc6/0x200
[] ? 0xf84b2fff
[] ? lazy_max_pages+0x1b/0x30
[] ? __vunmap+0xa5/0xf0
[] ? __vunmap+0xa5/0xf0
[] load_module+0x1333/0x1910
[] SyS_finit_module+0x7d/0xc0
[] ? vm_mmap_pgoff+0x7b/0xa0
[] sysenter_do_call+0x12/0x12
---[ end trace adb5c6a95d4529fe ]---
firewire_core 0000:85:09.0: created device fw0: GUID 5566778811223344, S400
usb 4-1: New USB device found, idVendor=08ff, idProduct=2810
usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 4-1: Product: Fingerprint Sensor
------------[ cut here ]------------
WARNING: CPU: 0 PID: 116 at /build/buildd/linux-3.16.0/drivers/gpu/drm/i915/intel_display.c:861 intel_wait_for_vblank+0x1a0/0x1f0 [i915]()
vblank wait timed out
Modules linked in: psmouse firewire_ohci firewire_core i915(+) sdhci_pci crc_itu_t sdhci wmi video i2c_algo_bit drm_kms_helper e1000e drm pata_acpi ptp pps_core
CPU: 0 PID: 116 Comm: systemd-udevd Tainted: G W I 3.16.0-33-generic #44-Ubuntu
Hardware name: Hewlett-Packard HP EliteBook 6930p /30DB, BIOS 68PCU Ver. F.0F 03/05/2009
00000000 00000000 f61eb920 c16bfb9a f61eb964 f61eb954 c105ef12 f894b3bc
f61eb980 00000074 f89418dc 0000035d f88f05e0 0000035d f88f05e0 f5e00000
00070040 0000000b f61eb96c c105ef63 00000009 f61eb964 f894b3bc f61eb980
Call Trace:
[] dump_stack+0x41/0x52
[] warn_slowpath_common+0x82/0xa0
[] ? intel_wait_for_vblank+0x1a0/0x1f0 [i915]
[] ? intel_wait_for_vblank+0x1a0/0x1f0 [i915]
[] warn_slowpath_fmt+0x33/0x40
[] intel_wait_for_vblank+0x1a0/0x1f0 [i915]
[] intel_tv_detect+0x2cf/0x5e0 [i915]
[] ? ftrace_raw_event_tick_stop+0xd0/0xd0
[] drm_helper_probe_single_connector_modes_merge_bits+0x268/0x350 [drm_kms_helper]
[] drm_helper_probe_single_connector_modes+0x17/0x20 [drm_kms_helper]
[] drm_fb_helper_probe_connector_modes.isra.3+0x41/0x60 [drm_kms_helper]
[] drm_fb_helper_initial_config+0x15a/0x490 [drm_kms_helper]
[] ? gen4_write32+0x49/0xc0 [i915]
[] ? gen4_read32+0x3f/0xc0 [i915]
[] ? intel_pin_and_fence_fb_obj+0x123/0x130 [i915]
[] intel_fbdev_initial_config+0x1c/0x20 [i915]
[] i915_driver_load+0xef8/0xf50 [i915]
[] ? i915_switcheroo_set_state+0x90/0x90 [i915]
[] ? cleanup_uevent_env+0x10/0x10
[] ? sysfs_add_file+0x23/0x30
[] ? get_device+0x14/0x30
[] ? klist_class_dev_get+0x12/0x20
[] ? klist_add_tail+0x34/0x40
[] ? device_add+0x1a4/0x600
[] ? kobject_set_name_vargs+0x42/0x60
[] ? drm_sysfs_device_add+0xba/0x100 [drm]
[] drm_dev_register+0x8e/0xd0 [drm]
[] drm_get_pci_dev+0x79/0x1d0 [drm]
[] ? kernfs_new_node+0x35/0x50
[] i915_pci_probe+0x35/0x60 [i915]
[] pci_device_probe+0x6f/0xd0
[] ? sysfs_create_link+0x25/0x50
[] driver_probe_device+0x93/0x3c0
[] ? __mutex_lock_slowpath+0xfc/0x1b0
[] ? __device_attach+0x40/0x40
[] __driver_attach+0x79/0x80
[] ? __device_attach+0x40/0x40
[] bus_for_each_dev+0x4f/0x80
[] driver_attach+0x1e/0x20
[] ? __device_attach+0x40/0x40
[] bus_add_driver+0x167/0x240
[] ? 0xf84b2fff
[] ? 0xf84b2fff
[] driver_register+0x5d/0xf0
[] __pci_register_driver+0x33/0x40
[] drm_pci_init+0xed/0x110 [drm]
[] ? 0xf84b2fff
[] i915_init+0x83/0x85 [i915]
[] do_one_initcall+0xc6/0x200
[] ? 0xf84b2fff
[] ? lazy_max_pages+0x1b/0x30
[] ? __vunmap+0xa5/0xf0
[] ? __vunmap+0xa5/0xf0
[] load_module+0x1333/0x1910
[] SyS_finit_module+0x7d/0xc0
[] ? vm_mmap_pgoff+0x7b/0xa0
[] sysenter_do_call+0x12/0x12
---[ end trace adb5c6a95d4529ff ]---
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x56
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x5) (20140424/exoparg2-420)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DOD] (Node f44203f0), AE_AML_PACKAGE_LIMIT (20140424/psparse-536)
ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20140424/video-1376)
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:03: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
psmouse serio4: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04791/0xb00000/0x20000, board id: 71, fw id: 504136
psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
usb 6-1: new full-speed USB device number 2 using uhci_hcd
usb 6-1: New USB device found, idVendor=046d, idProduct=c51a
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: USB Receiver
usb 6-1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/0003:046D:C51A.0001/input/input14
hid-generic 0003:046D:C51A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/0003:046D:C51A.0002/input/input15
hid-generic 0003:046D:C51A.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
usb 1-4.1: new low-speed USB device number 4 using ehci-pci
usb 1-4.1: New USB device found, idVendor=046a, idProduct=0023
usb 1-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 046a:0023 as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/1-4.1:1.0/0003:046A:0023.0003/input/input16
cherry 0003:046A:0023.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1a.7-4.1/input0
input: HID 046a:0023 as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/1-4.1:1.1/0003:046A:0023.0004/input/input17
cherry 0003:046A:0023.0004: input,hidraw3: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1a.7-4.1/input1
usb 1-4.2: new high-speed USB device number 5 using ehci-pci
usb 1-4.2: New USB device found, idVendor=0ccd, idProduct=008e
usb 1-4.2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-4.2: Product: Cinergy HTC USB XS
usb 1-4.2: Manufacturer: TerraTec Electronic GmbH
usb 1-4.2: SerialNumber: 080502009730
usb 1-4.3: new high-speed USB device number 6 using ehci-pci
usb 1-4.3: New USB device found, idVendor=046d, idProduct=0809
usb 1-4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 1-4.3: SerialNumber: 5060CD80
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
init: plymouth-upstart-bridge main process (199) killed by TERM signal
Adding 2006012k swap on /dev/sda5. Priority:-1 extents:1 across:2006012k SSFS
systemd-udevd[331]: starting version 208
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
hp_accel: hardware type NC693xx found
lis3lv02d: 8 bits sensor found
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
lp0: using parport0 (interrupt-driven).
mei_me 0000:00:03.0: irq 46 for MSI/MSI-X
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input18
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
cfg80211: Calling CRDA to update world regulatory domain
ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000047f (\PMIO) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000530-0x0000053f conflicts with OpRegion 0x00000500-0x0000053b (\GPIO) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000500-0x0000052f conflicts with OpRegion 0x00000500-0x0000053b (\GPIO) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
audit: type=1400 audit(1433442960.616:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=439 comm="apparmor_parser"
audit: type=1400 audit(1433442960.616:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=439 comm="apparmor_parser"
audit: type=1400 audit(1433442960.616:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=439 comm="apparmor_parser"
audit: type=1400 audit(1433442960.620:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=458 comm="apparmor_parser"
yenta_cardbus 0000:85:09.2: CardBus bridge found [103c:30db]
media: Linux media interface: v0.10
Linux video capture interface: v2.00
yenta_cardbus 0000:85:09.2: ISA IRQ mask 0x0c98, PCI irq 22
yenta_cardbus 0000:85:09.2: Socket status: 30000810
pci_bus 0000:85: Raising subordinate bus# of parent bus (#85) from #86 to #89
yenta_cardbus 0000:85:09.2: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff:
excluding 0x2000-0x20ff 0x2400-0x24ff
yenta_cardbus 0000:85:09.2: pcmcia: parent PCI bridge window: [mem 0x90500000-0x905fffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0x90500000-0x905fffff:
excluding 0x90500000-0x9050ffff
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl: module verification failed: signature and/or required key missing - tainting kernel
random: nonblocking pool is initialized
wlan0: Broadcom BCM4315 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
kvm: disabled by bios
kvm: disabled by bios
psmouse serio5: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
audit: type=1400 audit(1433442961.444:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=668 comm="apparmor_parser"
audit: type=1400 audit(1433442961.444:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=668 comm="apparmor_parser"
audit: type=1400 audit(1433442961.444:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="third_party" pid=668 comm="apparmor_parser"
sound hdaudioC0D0: autoconfig: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line
sound hdaudioC0D0: speaker_outs=1 (0x16/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Internal Mic=0x15
sound hdaudioC0D0: Mic=0x14
sound hdaudioC0D0: Line=0x1c
usb 1-4.3: set resolution quirk: cval->res = 384
uvcvideo: Found UVC 1.00 device (046d:0809)
usbcore: registered new interface driver snd-usb-audio
input: UVC Camera (046d:0809) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.3/1-4.3:1.0/input/input20
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
init: cups main process (678) killed by HUP signal
init: cups main process ended, respawning
pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
pcmcia_socket pcmcia_socket0: cs: memory probe 0x90510000-0x905fffff:
excluding 0x905fe000-0x9060bfff
pcmcia 0.0: pcmcia: registering new device pcmcia0.0 (IRQ: 3)
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
excluding 0x170-0x177 0x1f0-0x1f7 0x200-0x27f 0x370-0x37f
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
excluding 0x3f0-0x47f 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
excluding 0xa0000000-0xa0ffffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
excluding 0x60000000-0x60ffffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
clean.
init: failsafe main process (691) killed by TERM signal
em28xx: New device TerraTec Electronic GmbH Cinergy HTC USB XS @ 480 Mbps (0ccd:008e, interface 0, class 0)
em28xx: Audio interface 0 found (Vendor Class)
em28xx: Video interface 0 found: isoc
em28xx: DVB interface 0 found: isoc
em28xx: chip ID is em2884
scsi4 : pata_pcmcia
ata5: PATA max PIO0 cmd 0x2100 ctl 0x210e irq 3
input: HP WMI hotkeys as /devices/virtual/input/input19
em2884 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x58369b8e
em2884 #0: EEPROM info:
em2884 #0: microcode start address = 0x0004, boot configuration = 0x01
em2884 #0: I2S audio, 5 sample rates
em2884 #0: 500mA max power
em2884 #0: Table at offset 0x36, strings=0x269c, 0x326a, 0x1ac2
em2884 #0: Identified as Terratec Cinergy HTC USB XS (card=87)
em2884 #0: analog set to isoc mode.
em2884 #0: dvb set to isoc mode.
usbcore: registered new interface driver em28xx
em2884 #0: Registering V4L2 extension
em2884 #0: Config register raw data: 0x67
em2884 #0: I2S Audio (3 sample rate(s))
em2884 #0: No AC97 audio processor
em2884 #0: V4L2 video device registered as video1
em2884 #0: V4L2 extension successfully initialized
em28xx: Registered (Em28xx v4l2 Extension) extension
em2884 #0: Binding audio extension
em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
em28xx-audio.c: Copyright (C) 2007-2014 Mauro Carvalho Chehab
em2884 #0: Endpoint 0x83 high-speed on intf 0 alt 7 interval = 8, size 196
em2884 #0: Number of URBs: 1, with 64 packets and 192 size
em2884 #0: Audio extension successfully initialized
em28xx: Registered (Em28xx Audio Extension) extension
init: samba-ad-dc main process (806) terminated with status 1
em2884 #0: Binding DVB extension
audit: type=1400 audit(1433442962.260:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=908 comm="apparmor_parser"
audit: type=1400 audit(1433442962.260:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=908 comm="apparmor_parser"
audit: type=1400 audit(1433442962.272:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=908 comm="apparmor_parser"
systemd-logind[885]: New seat seat0.
systemd-logind[885]: Watching system buttons on /dev/input/event2 (Power Button)
systemd-logind[885]: Watching system buttons on /dev/input/event4 (Video Bus)
systemd-logind[885]: Watching system buttons on /dev/input/event1 (Lid Switch)
systemd-logind[885]: Watching system buttons on /dev/input/event0 (Sleep Button)
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
drxk: status = 0x039260d9
drxk: detected a drx-3926k, spin A1, xtal 20.250 MHz
/dev/vmmon[1616]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[1616]: Module vmmon: initialized
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=55)
Initialized host personality
NET: Registered protocol family 40
systemd-logind[885]: Failed to start unit user@108.service: Unknown unit: user@108.service
systemd-logind[885]: Failed to start user service: Unknown unit: user@108.service
systemd-logind[885]: New session c1 of user lightdm.
systemd-logind[885]: Linked /tmp/.X11-unix/X0 to /run/user/108/X11-display.
input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input13
hp_wmi: Unknown event_id - 0 - 0x0
/dev/vmnet: open called by PID 1733 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 1736 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 1746 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 1747 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 1751 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
/dev/vmnet: open called by PID 1724 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
userif-2: sent link down event.
userif-2: sent link up event.
drxk: DRXK driver version 0.9.4300
drxk: frontend initialized.
tda18271 9-0060: creating new instance
TDA18271HD/C2 detected @ 9-0060
DVB: registering new adapter (em2884 #0)
usb 1-4.2: DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)...
em2884 #0: DVB extension successfully initialized
em28xx: Registered (Em28xx dvb Extension) extension
em2884 #0: Registering input extension
Registered IR keymap rc-nec-terratec-cinergy-xs
input: em28xx IR (em2884 #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/rc/rc0/input25
rc0: em28xx IR (em2884 #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/rc/rc0
em2884 #0: Input extension successfully initalized
em28xx: Registered (Em28xx Input Extension) extension
userif-2: sent link down event.
userif-2: sent link up event.
init: mediatomb main process (2637) terminated with status 127
init: mediatomb main process ended, respawning
userif-2: sent link down event.
userif-2: sent link up event.
init: mythtv-backend main process (2671) terminated with status 127
init: mythtv-backend main process ended, respawning
init: mediatomb main process (2692) terminated with status 127
init: mediatomb main process ended, respawning
init: mediatomb main process (2711) terminated with status 127
init: mediatomb main process ended, respawning
init: mediatomb main process (2716) terminated with status 127
init: mediatomb main process ended, respawning
init: mediatomb main process (2719) terminated with status 127
init: mediatomb main process ended, respawning
init: mediatomb main process (2722) terminated with status 127
init: mediatomb main process ended, respawning
init: mediatomb main process (2725) terminated with status 127
init: mediatomb main process ended, respawning
init: mediatomb main process (2728) terminated with status 127
init: mediatomb main process ended, respawning
init: mediatomb main process (2731) terminated with status 127
init: mediatomb main process ended, respawning
init: mediatomb main process (2734) terminated with status 127
init: mediatomb main process ended, respawning
init: mediatomb main process (2737) terminated with status 127
init: mediatomb respawning too fast, stopped
systemd-logind[885]: Failed to start unit user@1000.service: Unknown unit: user@1000.service
systemd-logind[885]: Failed to start user service: Unknown unit: user@1000.service
systemd-logind[885]: New session c2 of user awe.
systemd-logind[885]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
audit_printk_skb: 84 callbacks suppressed
audit: type=1400 audit(1433442991.670:40): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3206 comm="apparmor_parser"
audit: type=1400 audit(1433442991.670:41): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3206 comm="apparmor_parser"
audit: type=1400 audit(1433442991.690:42): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="third_party" pid=3206 comm="apparmor_parser"
systemd-hostnamed[3642]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
perf interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5007 > 5000), lowering kernel.perf_event_max_sample_rate to 25000