dmesg - 2.6.2015
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-38-generic (buildd@allspice) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #52~14.04.1-Ubuntu SMP Fri May 8 09:43:57 UTC 2015 (Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000008d316fff] usable
BIOS-e820: [mem 0x000000008d317000-0x000000008d346fff] reserved
BIOS-e820: [mem 0x000000008d347000-0x000000008d70bfff] usable
BIOS-e820: [mem 0x000000008d70c000-0x000000008dbc1fff] ACPI NVS
BIOS-e820: [mem 0x000000008dbc2000-0x000000008eb28fff] reserved
BIOS-e820: [mem 0x000000008eb29000-0x000000008eb29fff] usable
BIOS-e820: [mem 0x000000008eb2a000-0x000000008ed2ffff] ACPI NVS
BIOS-e820: [mem 0x000000008ed30000-0x000000008ee7ffff] usable
BIOS-e820: [mem 0x000000008ee80000-0x000000008f440fff] reserved
BIOS-e820: [mem 0x000000008f441000-0x000000008f480fff] usable
BIOS-e820: [mem 0x000000008f481000-0x000000008f7f1fff] reserved
BIOS-e820: [mem 0x000000008f7f2000-0x000000008f7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Micro-Star International Co., Ltd. GX60 1AC/GX60 3AE/GX60 3BE/MS-16FK, BIOS E16FKAMS.90L 01/09/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFF0000000 write-back
2 base 00008F800000 mask FFFFFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000023f000000 aka 9200M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 256MB, type WB
reg 2, base: 2296MB, range: 8MB, type UC
total RAM covered: 2296M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 256MB, type WB
reg 2, base: 2296MB, range: 8MB, type UC
e820: update [mem 0x8f800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x8f800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7c0-0x000fd7cf] mapped at [ffff8800000fd7c0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fbd000, 0x01fbdfff] PGTABLE
BRK [0x01fbe000, 0x01fbefff] PGTABLE
BRK [0x01fbf000, 0x01fbffff] PGTABLE
init_memory_mapping: [mem 0x23ee00000-0x23effffff]
[mem 0x23ee00000-0x23effffff] page 2M
BRK [0x01fc0000, 0x01fc0fff] PGTABLE
init_memory_mapping: [mem 0x23c000000-0x23edfffff]
[mem 0x23c000000-0x23edfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x23bffffff]
[mem 0x200000000-0x23bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x8d316fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x8d1fffff] page 2M
[mem 0x8d200000-0x8d316fff] page 4k
init_memory_mapping: [mem 0x8d347000-0x8d70bfff]
[mem 0x8d347000-0x8d3fffff] page 4k
[mem 0x8d400000-0x8d5fffff] page 2M
[mem 0x8d600000-0x8d70bfff] page 4k
BRK [0x01fc1000, 0x01fc1fff] PGTABLE
init_memory_mapping: [mem 0x8eb29000-0x8eb29fff]
[mem 0x8eb29000-0x8eb29fff] page 4k
BRK [0x01fc2000, 0x01fc2fff] PGTABLE
init_memory_mapping: [mem 0x8ed30000-0x8ee7ffff]
[mem 0x8ed30000-0x8ee7ffff] page 4k
init_memory_mapping: [mem 0x8f441000-0x8f480fff]
[mem 0x8f441000-0x8f480fff] page 4k
init_memory_mapping: [mem 0x8f7f2000-0x8f7fffff]
[mem 0x8f7f2000-0x8f7fffff] page 4k
init_memory_mapping: [mem 0x100001000-0x1ffffffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x35ad8000-0x36d63fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 MSI_NB)
ACPI: XSDT 0x000000008D798078 000074 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: FACP 0x000000008D7A0B68 00010C (v05 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140424/tbfadt-649)
ACPI: DSDT 0x000000008D798188 0089DB (v02 MSI_NB MEGABOOK 00000000 INTL 20051117)
ACPI: FACS 0x000000008DBB8080 000040
ACPI: APIC 0x000000008D7A0C78 000072 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: FPDT 0x000000008D7A0CF0 000044 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: MCFG 0x000000008D7A0D38 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00010013)
ACPI: SLIC 0x000000008D7A0D78 000176 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: HPET 0x000000008D7A0EF0 000038 (v01 MSI_NB MEGABOOK 01072009 AMI 00000005)
ACPI: MSFF 0x000000008D7A0F28 000029 (v01 MSI_NB MEGABOOK 00000010 AMI 00010013)
ACPI: SSDT 0x000000008D7A0F58 000A9C (v01 AMD PUMORI 00000001 AMD 00000001)
ACPI: SSDT 0x000000008D7A19F8 001F6E (v02 AMD PUMORI 00000001 MSFT 04000000)
ACPI: CRAT 0x000000008D7A3968 0002A8 (v01 AMD PUMORI 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023effffff]
Initmem setup node 0 [mem 0x00000000-0x23effffff]
NODE_DATA [mem 0x23eff3000-0x23eff7fff]
[ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237200000-ffff88023e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x23effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0x8d316fff]
node 0: [mem 0x8d347000-0x8d70bfff]
node 0: [mem 0x8eb29000-0x8eb29fff]
node 0: [mem 0x8ed30000-0x8ee7ffff]
node 0: [mem 0x8f441000-0x8f480fff]
node 0: [mem 0x8f7f2000-0x8f7fffff]
node 0: [mem 0x100001000-0x23effffff]
On node 0 totalpages: 1886231
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 8994 pages used for memmap
DMA32 zone: 575611 pages, LIFO batch:31
Normal zone: 20416 pages used for memmap
Normal zone: 1306623 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x8d317000-0x8d346fff]
PM: Registered nosave memory: [mem 0x8d70c000-0x8dbc1fff]
PM: Registered nosave memory: [mem 0x8dbc2000-0x8eb28fff]
PM: Registered nosave memory: [mem 0x8eb2a000-0x8ed2ffff]
PM: Registered nosave memory: [mem 0x8ee80000-0x8f440fff]
PM: Registered nosave memory: [mem 0x8f481000-0x8f7f1fff]
PM: Registered nosave memory: [mem 0x8f800000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0x8f800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88023ec00000 s81408 r8192 d20992 u524288
pcpu-alloc: s81408 r8192 d20992 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1856736
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
AGP: Your BIOS doesn't leave a aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0x84000000-0x87ffffff] (65536KB)
PM: Registered nosave memory: [mem 0x84000000-0x87ffffff]
Memory: 7258600K/7544924K available (7626K kernel code, 1131K rwdata, 3596K rodata, 1352K init, 1300K bss, 286324K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 30408704 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 2495.327 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.65 BogoMIPS (lpj=9981308)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
[Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
tseg: 008f800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ftrace: allocating 29244 entries in 115 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-5750M APU with Radeon(tm) HD Graphics (fam: 15, model: 13, stepping: 01)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
[Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
#2[ 0.200238] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
#3
[Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19962.61 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x8d70c000-0x8dbc1fff] (4939776 bytes)
PM: Registering ACPI NVS region [mem 0x8eb2a000-0x8ed2ffff] (2121728 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 13:01:05, date: 06/02/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI Error: No handler for Region [EC__] (ffff880236c1fc18) [EmbeddedControl] (20140424/evregion-163)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-299)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC__.EOSV] (Node ffff880236c25fa0), AE_NOT_EXIST (20140424/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC__._REG] (Node ffff880236c25fc8), AE_NOT_EXIST (20140424/psparse-536)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: platform does not support [PME]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
pci 0000:00:01.0: [1002:990b] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:03.0: [1022:1413] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfeb4a000-0xfeb4bfff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
pci 0000:00:10.1: reg 0x10: [mem 0xfeb48000-0xfeb49fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf190-0xf197]
pci 0000:00:11.0: reg 0x14: [io 0xf180-0xf183]
pci 0000:00:11.0: reg 0x18: [io 0xf170-0xf177]
pci 0000:00:11.0: reg 0x1c: [io 0xf160-0xf163]
pci 0000:00:11.0: reg 0x20: [io 0xf150-0xf15f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb51000-0xfeb517ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb50000-0xfeb50fff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb4f000-0xfeb4f0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb4e000-0xfeb4efff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb4d000-0xfeb4d0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0xf140-0xf147]
pci 0000:00:14.1: reg 0x14: [io 0xf130-0xf133]
pci 0000:00:14.1: reg 0x18: [io 0xf120-0xf127]
pci 0000:00:14.1: reg 0x1c: [io 0xf110-0xf113]
pci 0000:00:14.1: reg 0x20: [io 0xf100-0xf10f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.7: [1022:7806] type 00 class 0x080501
pci 0000:00:14.7: reg 0x10: [mem 0xfeb4c000-0xfeb4c0ff 64bit]
pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
pci 0000:01:00.0: [1002:6800] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea3ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
pci 0000:03:00.0: [1969:e091] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xfe900000-0xfe93ffff 64bit]
pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:04:00.0: [168c:0037] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xfe800000-0xfe87ffff 64bit]
pci 0000:04:00.0: reg 0x30: [mem 0xfe880000-0xfe88ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 04]
pci 0000:00:15.1: bridge window [mem 0xfe800000-0xfe8fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs *4 5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:01.0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x8d317000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8d70c000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8eb2a000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8ee80000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8f481000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8f800000-0x8fffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x034d-0x034f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs SYN1507 SYN1500 SYN0002 PNP0f13 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x040b] has been reserved
system 00:06: [io 0x04d6] has been reserved
system 00:06: [io 0x0c00-0x0c01] has been reserved
system 00:06: [io 0x0c14] has been reserved
system 00:06: [io 0x0c50-0x0c51] has been reserved
system 00:06: [io 0x0c52] has been reserved
system 00:06: [io 0x0c6c] has been reserved
system 00:06: [io 0x0c6f] has been reserved
system 00:06: [io 0x0cd0-0x0cd1] has been reserved
system 00:06: [io 0x0cd2-0x0cd3] has been reserved
system 00:06: [io 0x0cd4-0x0cd5] has been reserved
system 00:06: [io 0x0cd6-0x0cd7] has been reserved
system 00:06: [io 0x0cd8-0x0cdf] has been reserved
system 00:06: [io 0x0800-0x089f] could not be reserved
system 00:06: [io 0x0b20-0x0b3f] has been reserved
system 00:06: [io 0x0900-0x090f] has been reserved
system 00:06: [io 0x0910-0x091f] has been reserved
system 00:06: [io 0xfe00-0xfefe] has been reserved
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:06: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:06: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x90000000-0xbfffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02]
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:15.1: PCI bridge to [bus 04]
pci 0000:00:15.1: bridge window [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM
pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18992K (ffff880035ad8000 - ffff880036d64000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x89317000-0x8d317000] (64MB) mapped at [ffff880089317000-ffff88008d316fff]
perf: AMD NB counters detected
microcode: CPU0: patch_level=0x06001119
microcode: CPU1: patch_level=0x06001119
microcode: CPU2: patch_level=0x06001119
microcode: CPU3: patch_level=0x06001119
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1433250065.884:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 14214
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:03.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:03.0:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
pciehp 0000:00:03.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:07/PNP0C09:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (48 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4f000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-38-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4d000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-38-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb50000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.16.0-38-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4e000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.16.0-38-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.0-38-generic xhci_hcd
usb usb5: SerialNumber: 0000:00:10.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.16.0-38-generic xhci_hcd
usb usb6: SerialNumber: 0000:00:10.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 7
xhci_hcd 0000:00:10.1: irq 46 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 47 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 3.16.0-38-generic xhci_hcd
usb usb7: SerialNumber: 0000:00:10.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
ACPI: Battery Slot [BAT1] (battery present)
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.16.0-38-generic xhci_hcd
usb usb8: SerialNumber: 0000:00:10.1
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: c284edaccf0b473652c34d23bec356944236e63b'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 3:488:27
memory memory67: hash matches
rtc_cmos 00:01: setting system clock to 2015-06-02 13:01:06 UTC (1433250066)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Freeing unused kernel memory: 1352K (ffffffff81d1c000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 556K (ffff880001775000 - ffff880001800000)
Freeing unused kernel memory: 500K (ffff880001b83000 - ffff880001c00000)
systemd-udevd[117]: starting version 204
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: irq 51 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0xe impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51180 irq 51
ata5: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51200 irq 51
ata6: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51280 irq 51
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7806] (rev 0)
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [8c:89:a5:0a:8f:4d]
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: failed to get NCQ Send/Recv Log Emask 0x1
ata6.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT01B6Q, max UDMA/133
ata6.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata4.00: ATA-8: WDC WD7500BPKT-22PK4T0, 01.01A01, max UDMA/133
ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: failed to get NCQ Send/Recv Log Emask 0x1
ata6.00: configured for UDMA/133
ata5.00: ATAPI: TSSTcorp CDDVDW SN-208DB, TM00, max UDMA/100
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD7500BPKT-2 1A01 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 3:0:0:0: [sda] 4096-byte physical blocks
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: configured for UDMA/100
usb 3-4: new full-speed USB device number 2 using ohci-pci
scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208DB TM00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
scsi 5:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4
sd 5:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 < sda5 > sda3 sda4
sd 3:0:0:0: [sda] Attached SCSI disk
usb 3-4: New USB device found, idVendor=1770, idProduct=ff00
usb 3-4: New USB device strings: Mfr=1, Product=1, SerialNumber=1
usb 3-4: Product: MSI EPF USB
usb 3-4: Manufacturer: MSI EPF USB
usb 3-4: SerialNumber: MSI EPF USB
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hid-generic 0003:1770:FF00.0001: hiddev0,hidraw0: USB HID v1.10 Device [MSI EPF USB MSI EPF USB] on usb-0000:00:12.0-4/input0
tsc: Refined TSC clocksource calibration: 2495.337 MHz
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
Switched to clocksource tsc
init: plymouth-upstart-bridge main process (194) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (204) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (207) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 15625212k swap on /dev/sda3. Priority:-1 extents:1 across:15625212k FS
systemd-udevd[325]: starting version 204
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
acpi device:17: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
acpi device:1a: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:19/LNXVIDEO:01/input/input7
wmi: Mapper loaded
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
input: MSI WMI hotkeys as /devices/virtual/input/input8
fglrx: module verification failed: signature and/or required key missing - tainting kernel
cfg80211: Calling CRDA to update world regulatory domain
audit: type=1400 audit(1433242869.318:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=394 comm="apparmor_parser"
audit: type=1400 audit(1433242869.318:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=394 comm="apparmor_parser"
audit: type=1400 audit(1433242869.318:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=394 comm="apparmor_parser"
audit: type=1400 audit(1433242869.322:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=394 comm="apparmor_parser"
audit: type=1400 audit(1433242869.322:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=394 comm="apparmor_parser"
audit: type=1400 audit(1433242869.322:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=394 comm="apparmor_parser"
[fglrx] Maximum main memory to use for locked dma buffers: 6892 MBytes.
[fglrx] vendor: 1002 device: 990b revision: 0 count: 1
[fglrx] vendor: 1002 device: 6800 revision: 0 count: 2
[fglrx] ioport: bar 1, base 0xf000, size: 0x100
[fglrx] ioport: bar 4, base 0xe000, size: 0x100
pci 0000:01:00.0: enabling device (0000 -> 0003)
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 14.50.2 [Nov 20 2014] with 2 minors
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
AVX version of gcm_enc/dec engaged.
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90010f80000, irq=17
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
snd_hda_intel 0000:00:01.1: irq 52 for MSI/MSI-X
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
sound hdaudioC1D0: ALC892: SKU not ready 0x598301f0
sound hdaudioC1D0: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:line
sound hdaudioC1D0: speaker_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: mono: mono_out=0x0
sound hdaudioC1D0: dig-out=0x1e/0x0
sound hdaudioC1D0: inputs:
sound hdaudioC1D0: Mic=0x18
sound hdaudioC1D0: Internal Mic=0x12
sound hdaudioC1D0: Line=0x1a
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: errors=remount-ro
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: errors=remount-ro
init: failsafe main process (649) killed by TERM signal
init: samba-ad-dc main process (674) terminated with status 1
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
audit: type=1400 audit(1433242870.502:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=753 comm="apparmor_parser"
audit: type=1400 audit(1433242870.502:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=753 comm="apparmor_parser"
audit: type=1400 audit(1433242870.502:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=753 comm="apparmor_parser"
alx 0000:03:00.0: irq 53 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
fglrx_pci 0000:00:01.0: irq 54 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1273
[fglrx] Firegl kernel thread PID: 1274
[fglrx] Firegl kernel thread PID: 1275
[fglrx] IRQ 54 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fab4000, size:4000
[fglrx] Reserved FB block: Unshared offset:fab8000, size:548000
[fglrx] Reserved FB block: Unshared offset:2ffed000, size:13000
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
fglrx_pci 0000:01:00.0: irq 55 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1277
[fglrx] Firegl kernel thread PID: 1278
[fglrx] Firegl kernel thread PID: 1279
[fglrx] IRQ 55 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f7b4000, size:4000
[fglrx] Reserved FB block: Unshared offset:f7b8000, size:548000
[fglrx] Reserved FB block: Unshared offset:7fff3000, size:d000
[fglrx] ATIF platform detected with notification ID: 0x81
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.AF03] (Node ffff880236c317d0), AE_AML_INFINITE_LOOP (20140424/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATIF] (Node ffff880236c31550), AE_AML_INFINITE_LOOP (20140424/psparse-536)
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1333) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
systemd-hostnamed[1748]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
wlan0: authenticate with e8:ed:f3:c2:0c:a1
wlan0: send auth to e8:ed:f3:c2:0c:a1 (try 1/3)
wlan0: authenticated
wlan0: associate with e8:ed:f3:c2:0c:a1 (try 1/3)
wlan0: RX AssocResp from e8:ed:f3:c2:0c:a1 (capab=0x431 status=0 aid=7)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: CZ
ath: EEPROM regdomain: 0x80cb
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x36
ath: Country alpha2 being used: CZ
ath: Regpair used: 0x36
ath: regdomain 0x80cb dynamically updated by country IE
cfg80211: Regulatory domain changed to country: CZ
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
usb 5-1: new low-speed USB device number 2 using xhci_hcd
usb 5-1: New USB device found, idVendor=0458, idProduct=003a
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: Laser Mouse
usb 5-1: Manufacturer: Genius
usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Genius Laser Mouse as /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1:1.0/0003:0458:003A.0002/input/input15
hid-generic 0003:0458:003A.0002: input,hidraw1: USB HID v1.10 Mouse [Genius Laser Mouse] on usb-0000:00:10.0-1/input0
usb 7-1: new full-speed USB device number 2 using xhci_hcd
usb 7-1: New USB device found, idVendor=09da, idProduct=9090
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: USB Device
usb 7-1: Manufacturer: A4TECH
input: A4TECH USB Device as /devices/pci0000:00/0000:00:10.1/usb7/7-1/7-1:1.0/0003:09DA:9090.0003/input/input16
hid-generic 0003:09DA:9090.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:10.1-1/input0
input: A4TECH USB Device as /devices/pci0000:00/0000:00:10.1/usb7/7-1/7-1:1.1/0003:09DA:9090.0004/input/input17
hid-generic 0003:09DA:9090.0004: input,hidraw3: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:10.1-1/input1
systemd-hostnamed[4860]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
show_signal_msg: 153 callbacks suppressed
Pedestrians[5644]: segfault at 8 ip 000000000042f11e sp 00007ffd3b63c560 error 4 in Pedestrians[400000+a9000]
Pedestrians[5837]: segfault at 0 ip 000000300046d994 sp 00007ffc8e744bc0 error 4 in libc-2.19.so[3000400000+1bb000]
Pedestrians[5873]: segfault at 8 ip 000000000042f11e sp 00007fffe1b1c610 error 4 in Pedestrians[400000+a9000]
Pedestrians[5987]: segfault at 8 ip 000000000042f11e sp 00007ffe9c1ebe50 error 4 in Pedestrians[400000+a9000]
ath: phy0: Failed to stop TX DMA, queues=0x00a!
ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0002a800
ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Pedestrians[7533]: segfault at 8 ip 000000000042f11e sp 00007ffc3ff003a0 error 4 in Pedestrians[400000+a9000]
ath: phy0: Failed to stop TX DMA, queues=0x00a!
ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400
ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
UDF-fs: INFO Mounting volume 'DP_xpfudl01', timestamp 2015/05/27 12:57 (1078)
systemd-hostnamed[7610]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
Pedestrians[8644]: segfault at 8 ip 000000000042f11e sp 00007fffdc7caa80 error 4 in Pedestrians[400000+a9000]
systemd-hostnamed[10070]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
Pedestrians[10264]: segfault at 0 ip 000000300046d994 sp 00007ffc132be4a0 error 4 in libc-2.19.so[3000400000+1bb000]
Pedestrians[10340]: segfault at 10 ip 0000000000453fb6 sp 00007ffe3cee1170 error 4 in Pedestrians[400000+a9000]
Pedestrians[10377]: segfault at 8 ip 000000000042f22e sp 00007ffc398fee90 error 4 in Pedestrians[400000+a9000]
Pedestrians[10389]: segfault at 10 ip 0000000000453fb6 sp 00007ffcd1e63fa0 error 4 in Pedestrians[400000+a9000]
Pedestrians[10431]: segfault at 10 ip 0000000000453fb6 sp 00007ffd6d448390 error 4 in Pedestrians[400000+a9000]
Pedestrians[10446]: segfault at 10 ip 0000000000453fb6 sp 00007fffbe0ad560 error 4 in Pedestrians[400000+a9000]
Pedestrians[10505]: segfault at 10 ip 0000000000453fb6 sp 00007ffdf7a00480 error 4 in Pedestrians[400000+a9000]
VFS: busy inodes on changed media or resized disk sr0
ath: phy0: Failed to stop TX DMA, queues=0x00a!
ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400
ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
svetlo[12218]: segfault at 0 ip (null) sp 00007fffebb84a58 error 14 in svetlo[400000+1000]
svetlo[12238]: segfault at 0 ip (null) sp 00007ffd49744658 error 14 in svetlo[400000+1000]
sr 4:0:0:0: [sr0] Device not ready
sr 4:0:0:0: [sr0]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 4:0:0:0: [sr0]
Sense Key : Not Ready [current]
sr 4:0:0:0: [sr0]
Add. Sense: Medium not present - tray closed
sr 4:0:0:0: [sr0] CDB:
Read(10): 28 00 00 00 01 23 00 00 01 00
end_request: I/O error, dev sr0, sector 1164
Pedestrians[12561]: segfault at 10 ip 0000000000453fb6 sp 00007ffdcf27ad40 error 4 in Pedestrians[400000+a9000]
Pedestrians[12571]: segfault at 10 ip 0000000000453fb6 sp 00007fffafeca1e0 error 4 in Pedestrians[400000+a9000]
Pedestrians[12624]: segfault at 8 ip 00000030114bb5c8 sp 00007ffc1a630580 error 4 in libstdc++.so.6.0.19[3011400000+e6000]
Pedestrians[12687]: segfault at 8 ip 00000030114bb5c8 sp 00007fffd4daf910 error 4 in libstdc++.so.6.0.19[3011400000+e6000]
Pedestrians[12774]: segfault at 8 ip 00000030114bb5c8 sp 00007ffd13c6c450 error 4 in libstdc++.so.6.0.19[3011400000+e6000]
Pedestrians[12804]: segfault at 8 ip 00000030114bb5c8 sp 00007ffed3b7dc40 error 4 in libstdc++.so.6.0.19[3011400000+e6000]
Pedestrians[12824]: segfault at 8 ip 00000030114bb5c8 sp 00007ffdffda4150 error 4 in libstdc++.so.6.0.19[3011400000+e6000]
Pedestrians[12886]: segfault at 8 ip 00000030114bb5c8 sp 00007ffe2a620d80 error 4 in libstdc++.so.6.0.19[3011400000+e6000]
Pedestrians[12961]: segfault at 8 ip 00000030114bb5c8 sp 00007ffeb5a459f0 error 4 in libstdc++.so.6.0.19[3011400000+e6000]
Pedestrians[13016]: segfault at 10 ip 0000000000453a46 sp 00007fffd8a4ffa0 error 4 in Pedestrians[400000+a9000]
Pedestrians[13074]: segfault at 10 ip 0000000000453396 sp 00007ffcbd7315e0 error 4 in Pedestrians[400000+a9000]
Pedestrians[13161]: segfault at 10 ip 0000000000453396 sp 00007ffc4b662fa0 error 4 in Pedestrians[400000+a9000]
Pedestrians[13210]: segfault at 10 ip 0000000000452e86 sp 00007ffd948eac10 error 4 in Pedestrians[400000+a8000]
Pedestrians[13253]: segfault at 8 ip 000000000042f2ce sp 00007ffc3cd8c920 error 4 in Pedestrians[400000+a8000]
Pedestrians[13266]: segfault at 10 ip 0000000000452e86 sp 00007ffdc284e940 error 4 in Pedestrians[400000+a8000]
Pedestrians[13299]: segfault at 10 ip 0000000000452e86 sp 00007fff90401540 error 4 in Pedestrians[400000+a8000]
Pedestrians[13353]: segfault at 10 ip 00000000004540c6 sp 00007fff8d9034f0 error 4 in Pedestrians[400000+a9000]
Pedestrians[13380]: segfault at 10 ip 00000000004540c6 sp 00007ffec4fa6c20 error 4 in Pedestrians[400000+a9000]
Pedestrians[13444]: segfault at 10 ip 000000000045411d sp 00007ffc15afb740 error 4 in Pedestrians[400000+a9000]
Pedestrians[13472]: segfault at 10 ip 000000000045411d sp 00007ffc8e900df0 error 4 in Pedestrians[400000+a9000]
Pedestrians[13527]: segfault at 10 ip 000000000045411d sp 00007fffa95e7f10 error 4 in Pedestrians[400000+a9000]
Pedestrians[13887]: segfault at 10 ip 000000000045411d sp 00007ffc5ec6a1d0 error 4 in Pedestrians[400000+a9000]
Pedestrians[13926]: segfault at 10 ip 000000000045411d sp 00007ffda247a130 error 4 in Pedestrians[400000+a9000]
systemd-hostnamed[14021]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
ath: phy0: Failed to stop TX DMA, queues=0x00a!
ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400
ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Pedestrians[14440]: segfault at 10 ip 000000000045411d sp 00007fff8e0831e0 error 4 in Pedestrians[400000+a9000]
Pedestrians[14463]: segfault at 8 ip 000000000042f22e sp 00007fff71cf3650 error 4 in Pedestrians[400000+a9000]
Pedestrians[14476]: segfault at 10 ip 000000000045411d sp 00007fffb5359de0 error 4 in Pedestrians[400000+a9000]
Pedestrians[14503]: segfault at 10 ip 000000000045411d sp 00007ffe6a212ca0 error 4 in Pedestrians[400000+a9000]
Pedestrians[14588]: segfault at 10 ip 00000000004541ad sp 00007ffc84bf02f0 error 4 in Pedestrians[400000+a9000]
ath: phy0: Failed to stop TX DMA, queues=0x00a!
ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400
ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
sr 4:0:0:0: [sr0] Device not ready
sr 4:0:0:0: [sr0]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 4:0:0:0: [sr0]
Sense Key : Not Ready [current]
sr 4:0:0:0: [sr0]
Add. Sense: Medium not present - tray closed
sr 4:0:0:0: [sr0] CDB:
Read(10): 28 00 00 00 01 23 00 00 01 00
end_request: I/O error, dev sr0, sector 1164