dmesg - AA
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.0.0-rc7-custom (foreman@comdvln64bm043) (gcc version 4.8.2 (GCC) ) #1 SMP Wed May 27 22:12:14 EDT 2015
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
tseg: 00df000000
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dd01cfff] usable
BIOS-e820: [mem 0x00000000dd01d000-0x00000000dd2fcfff] reserved
BIOS-e820: [mem 0x00000000dd2fd000-0x00000000dd30cfff] ACPI data
BIOS-e820: [mem 0x00000000dd30d000-0x00000000dd70efff] ACPI NVS
BIOS-e820: [mem 0x00000000dd70f000-0x00000000de57ffff] reserved
BIOS-e820: [mem 0x00000000de580000-0x00000000de580fff] usable
BIOS-e820: [mem 0x00000000de581000-0x00000000de786fff] ACPI NVS
BIOS-e820: [mem 0x00000000de787000-0x00000000debc0fff] usable
BIOS-e820: [mem 0x00000000debc1000-0x00000000deff3fff] reserved
BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/A88X-PLUS, BIOS 1701 06/23/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000D0000000 mask FFFFF8000000 write-back
4 base 0000D8000000 mask FFFFFC000000 write-back
5 base 0000DC000000 mask FFFFFE000000 write-back
6 base 0000DE000000 mask FFFFFF000000 write-back
7 disabled
TOM2: 000000011f000000 aka 4592M
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd760-0x000fd76f] mapped at [ffff8800000fd760]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
BRK [0x01fd8000, 0x01fd8fff] PGTABLE
init_memory_mapping: [mem 0x11ee00000-0x11effffff]
[mem 0x11ee00000-0x11effffff] page 2M
BRK [0x01fd9000, 0x01fd9fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x11edfffff]
[mem 0x100000000-0x11edfffff] page 2M
init_memory_mapping: [mem 0xc0000000-0xdd01cfff]
[mem 0xc0000000-0xdcffffff] page 2M
[mem 0xdd000000-0xdd01cfff] page 4k
BRK [0x01fda000, 0x01fdafff] PGTABLE
BRK [0x01fdb000, 0x01fdbfff] PGTABLE
init_memory_mapping: [mem 0xde580000-0xde580fff]
[mem 0xde580000-0xde580fff] page 4k
init_memory_mapping: [mem 0xde787000-0xdebc0fff]
[mem 0xde787000-0xde7fffff] page 4k
[mem 0xde800000-0xde9fffff] page 2M
[mem 0xdea00000-0xdebc0fff] page 4k
init_memory_mapping: [mem 0xdeff4000-0xdeffffff]
[mem 0xdeff4000-0xdeffffff] page 4k
init_memory_mapping: [mem 0x00100000-0xbfffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
RAMDISK: [mem 0x35e44000-0x36f19fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DD304078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DD30AF30 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150204/tbfadt-649)
ACPI: DSDT 0x00000000DD304180 006DAC (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000DD704080 000040
ACPI: APIC 0x00000000DD30B040 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DD30B0C0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000DD30B108 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: CRAT 0x00000000DD30C0F0 000500 (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: HPET 0x00000000DD30B1A0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: BGRT 0x00000000DD30B1D8 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DD30B210 000B9C (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DD30BDB0 00033B (v02 AMD BANTRY 00000002 MSFT 04000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011effffff]
NODE_DATA(0) allocated [mem 0x11eff7000-0x11effbfff]
[ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011a600000-ffff88011e5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000011effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000dd01cfff]
node 0: [mem 0x00000000de580000-0x00000000de580fff]
node 0: [mem 0x00000000de787000-0x00000000debc0fff]
node 0: [mem 0x00000000deff4000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000011effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff]
On node 0 totalpages: 1033217
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 14098 pages used for memmap
DMA32 zone: 902244 pages, LIFO batch:31
Normal zone: 1984 pages used for memmap
Normal zone: 126976 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdd01d000-0xdd2fcfff]
PM: Registered nosave memory: [mem 0xdd2fd000-0xdd30cfff]
PM: Registered nosave memory: [mem 0xdd30d000-0xdd70efff]
PM: Registered nosave memory: [mem 0xdd70f000-0xde57ffff]
PM: Registered nosave memory: [mem 0xde581000-0xde786fff]
PM: Registered nosave memory: [mem 0xdebc1000-0xdeff3fff]
PM: Registered nosave memory: [mem 0xdf000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 32 pages/cpu @ffff88011ec00000 s91096 r8192 d31784 u524288
pcpu-alloc: s91096 r8192 d31784 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1017050
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
AGP: Your BIOS doesn't leave a aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
Memory: 3901380K/4132868K available (7777K kernel code, 1178K rwdata, 3728K rodata, 1400K init, 1308K bss, 231488K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:1000 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3718.109 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7436.21 BogoMIPS (lpj=14872436)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150204
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81e86000 - ffffffff81e8d000)
ftrace: allocating 29723 entries in 117 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-7850K Radeon R7, 12 Compute Cores 4C+8G (fam: 15, model: 30, stepping: 01)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (29744.87 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xdd30d000-0xdd70efff] (4202496 bytes)
PM: Registering ACPI NVS region [mem 0xde581000-0xde786fff] (2121728 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 11:07:19, date: 05/29/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A03:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff window]
pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
pci 0000:00:02.1: [1022:1425] type 01 class 0x060400
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.1: System wakeup disabled by ACPI
pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfeb06000-0xfeb07fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.1: reg 0x10: [mem 0xfeb04000-0xfeb05fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb0c000-0xfeb0c7ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb0b000-0xfeb0bfff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb0a000-0xfeb0a0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb09000-0xfeb09fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb08000-0xfeb080ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: PME# supported from D0 D3hot D3cold
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.2: PME# supported from D0 D3hot D3cold
pci 0000:00:15.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
pci 0000:01:00.0: [1002:665d] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x24: [mem 0xfea00000-0xfea3ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:0002] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
pci 0000:00:02.1: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.1: bridge window [mem 0xe0000000-0xf07fffff 64bit pref]
pci 0000:02:05.0: [10ec:8139] type 00 class 0x020000
pci 0000:02:05.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:02:05.0: reg 0x14: [mem 0xfe920000-0xfe9200ff]
pci 0000:02:05.0: reg 0x30: [mem 0xfe900000-0xfe91ffff pref]
pci 0000:02:05.0: supports D1 D2
pci 0000:02:05.0: PME# supported from D1 D2 D3hot
pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff window] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:04:00.0: reg 0x18: [mem 0xfe800000-0xfe800fff 64bit]
pci 0000:04:00.0: reg 0x20: [mem 0xf0900000-0xf0903fff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:15.2: PCI bridge to [bus 04]
pci 0000:00:15.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:15.2: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:15.2: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdd01d000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde581000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdebc1000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0300-0x031f] has been reserved
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x040b] has been reserved
system 00:08: [io 0x04d6] has been reserved
system 00:08: [io 0x0c00-0x0c01] has been reserved
system 00:08: [io 0x0c14] has been reserved
system 00:08: [io 0x0c50-0x0c51] has been reserved
system 00:08: [io 0x0c52] has been reserved
system 00:08: [io 0x0c6c] has been reserved
system 00:08: [io 0x0c6f] has been reserved
system 00:08: [io 0x0cd0-0x0cd1] has been reserved
system 00:08: [io 0x0cd2-0x0cd3] has been reserved
system 00:08: [io 0x0cd4-0x0cd5] has been reserved
system 00:08: [io 0x0cd6-0x0cd7] has been reserved
system 00:08: [io 0x0cd8-0x0cdf] has been reserved
system 00:08: [io 0x0800-0x089f] could not be reserved
system 00:08: [io 0x0b20-0x0b3f] has been reserved
system 00:08: [io 0x0900-0x090f] has been reserved
system 00:08: [io 0x0910-0x091f] has been reserved
system 00:08: [io 0xfe00-0xfefe] has been reserved
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:08: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:08: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
pci 0000:00:02.1: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.1: bridge window [mem 0xe0000000-0xf07fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02]
pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:00:15.2: PCI bridge to [bus 04]
pci 0000:00:15.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:15.2: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:15.2: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf07fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:02: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:02: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:02: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:02: resource 10 [mem 0xe0000000-0xffffffff window]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:04: resource 2 [mem 0xf0900000-0xf09fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17240K (ffff880035e44000 - ffff880036f1a000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd901d000-0xdd01d000] (64MB) mapped at [ffff8800d901d000-ffff8800dd01cfff]
perf: AMD NB counters detected
microcode: CPU0: patch_level=0x06003106
microcode: CPU1: patch_level=0x06003106
microcode: CPU2: patch_level=0x06003106
microcode: CPU3: patch_level=0x06003106
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000001ff)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1432897639.568:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004780000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.0.0-rc7-custom xhci-hcd
usb usb1: SerialNumber: 0000:00:10.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.0.0-rc7-custom xhci-hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.0.0-rc7-custom xhci-hcd
usb usb3: SerialNumber: 0000:00:10.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.0.0-rc7-custom xhci-hcd
usb usb4: SerialNumber: 0000:00:10.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb0a000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 4.0.0-rc7-custom ehci_hcd
usb usb5: SerialNumber: 0000:00:12.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb08000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 4.0.0-rc7-custom ehci_hcd
usb usb6: SerialNumber: 0000:00:13.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0b000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.0.0-rc7-custom ohci_hcd
usb usb7: SerialNumber: 0000:00:12.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb09000
usb 3-2: new full-speed USB device number 2 using xhci_hcd
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 4.0.0-rc7-custom ohci_hcd
usb usb8: SerialNumber: 0000:00:13.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 5 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 783e42ed7fe18d0854eb4049701c96a1c19e198b'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 15:403:126
acpi device:01: hash matches
rtc_cmos 00:04: setting system clock to 2015-05-29 11:07:20 UTC (1432897640)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1400K (ffffffff81d28000 - ffffffff81e86000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 404K (ffff88000179b000 - ffff880001800000)
usb 3-2: New USB device found, idVendor=046d, idProduct=c52b
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Receiver
usb 3-2: Manufacturer: Logitech
Freeing unused kernel memory: 368K (ffff880001ba4000 - ffff880001c00000)
systemd-udevd[119]: starting version 204
libahci: module verification failed: signature and/or required key missing - tainting kernel
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
hidraw: raw HID events driver (C) Jiri Kosina
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb0c000 port 0xfeb0c100 irq 34
ata2: SATA max UDMA/133 abar m2048@0xfeb0c000 port 0xfeb0c180 irq 34
ata3: SATA max UDMA/133 abar m2048@0xfeb0c000 port 0xfeb0c200 irq 34
ata4: SATA max UDMA/133 abar m2048@0xfeb0c000 port 0xfeb0c280 irq 34
ata5: SATA max UDMA/133 abar m2048@0xfeb0c000 port 0xfeb0c300 irq 34
ata6: SATA max UDMA/133 abar m2048@0xfeb0c000 port 0xfeb0c380 irq 34
ata7: SATA max UDMA/133 abar m2048@0xfeb0c000 port 0xfeb0c400 irq 34
ata8: SATA max UDMA/133 abar m2048@0xfeb0c000 port 0xfeb0c480 irq 34
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:02:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:10.1-2/input2
8139too: 8139too Fast Ethernet driver 0.9.28
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
8139too 0000:02:05.0 eth0: RealTek RTL8139 at 0x000000000001d000, 5c:63:bf:8c:a5:49, IRQ 20
r8169 0000:04:00.0 eth1: RTL8168g/8111g at 0xffffc90004766000, 10:c3:7b:9f:f7:b9, XID 0c000800 IRQ 35
r8169 0000:04:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ata2: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
tsc: Refined TSC clocksource calibration: 3718.499 MHz
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Switched to clocksource tsc
random: init urandom read with 85 bits of entropy available
init: plymouth-upstart-bridge main process (197) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (208) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (210) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (212) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (214) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
random: nonblocking pool is initialized
Adding 4135932k swap on /dev/sda5. Priority:-1 extents:1 across:4135932k FS
systemd-udevd[319]: starting version 204
8139too 0000:02:05.0 eth2: renamed from eth0
systemd-udevd[342]: renamed network interface eth0 to eth2
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI Error: [AFN7] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB21.VGA_.LCD_._BCM] (Node ffff88011a0a3ed8), AE_NOT_FOUND (20150204/psparse-536)
ACPI Error: Evaluating _BCM failed (20150204/video-387)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:03/LNXVIDEO:01/input/input4
wmi: Mapper loaded
MCE: In-kernel MCE decoding enabled.
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
asus_wmi: Disabling ACPI video driver
EDAC MC: Ver: 3.0.0
[drm] Initialized drm 1.1.0 20060810
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
audit: type=1400 audit(1432897647.221:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=409 comm="apparmor_parser"
audit: type=1400 audit(1432897647.221:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=409 comm="apparmor_parser"
audit: type=1400 audit(1432897647.221:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=409 comm="apparmor_parser"
audit: type=1400 audit(1432897647.333:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=410 comm="apparmor_parser"
audit: type=1400 audit(1432897647.333:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=410 comm="apparmor_parser"
audit: type=1400 audit(1432897647.333:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=410 comm="apparmor_parser"
audit: type=1400 audit(1432897647.337:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=408 comm="apparmor_parser"
audit: type=1400 audit(1432897647.337:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=408 comm="apparmor_parser"
audit: type=1400 audit(1432897647.337:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=408 comm="apparmor_parser"
[drm] amdgpu kernel modesetting enabled.
checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
fb: switching to amdgpudrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (BONAIRE 0x1002:0x665D 0x1002:0x0B00).
[drm] register mmio base: 0xFEA00000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xF0000000
[drm] doorbell mmio size: 8388608
ATOM BIOS: C58205
amdgpu 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
amdgpu 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 1960410 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 1024M of VRAM memory ready
[drm] amdgpu: 1024M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:01:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
input: Logitech M215 2nd Gen as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:401B.0004/input/input7
logitech-hidpp-device 0003:046D:401B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M215 2nd Gen] on usb-0000:00:10.1-2:1
input: Logitech K330 as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:4016.0005/input/input8
logitech-hidpp-device 0003:046D:4016.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K330] on usb-0000:00:10.1-2:2
[drm] probing gen 2 caps for device 1022:1425 = 733d03/e
[drm] Internal thermal controller with fan control
[drm] amdgpu: dpm initialized
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD2
[drm] DDC: 0x194c 0x194c 0x194d 0x194d 0x194e 0x194e 0x194f 0x194f
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x1954 0x1954 0x1955 0x1955 0x1956 0x1956 0x1957 0x1957
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-I-1
[drm] HPD6
[drm] DDC: 0x1960 0x1960 0x1961 0x1961 0x1962 0x1962 0x1963 0x1963
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
sound hdaudioC0D0: autoconfig for ALC887-VD: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x11/0x1e
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000014, cpu addr 0xffff8800d185e014
amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000024, cpu addr 0xffff8800d185e024
amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000034, cpu addr 0xffff8800d185e034
amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000044, cpu addr 0xffff8800d185e044
amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000054, cpu addr 0xffff8800d185e054
amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000040000064, cpu addr 0xffff8800d185e064
amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000040000074, cpu addr 0xffff8800d185e074
amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000040000084, cpu addr 0xffff8800d185e084
amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x0000000040000094, cpu addr 0xffff8800d185e094
amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x00000000400000a4, cpu addr 0xffff8800d185e0a4
amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x00000000400000b4, cpu addr 0xffff8800d185e0b4
[drm] Found UVD firmware Version: 1.55 Family ID: 9
amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x000000000027b2b0, cpu addr 0xffffc90005bb82b0
[drm] Found VCE firmware Version: 48.0 Binary ID: 2
amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x00000000400000d4, cpu addr 0xffff8800d185e0d4
amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x00000000400000e4, cpu addr 0xffff8800d185e0e4
[drm] probing gen 2 caps for device 1022:1425 = 733d03/e
[drm] PCIE gen 3 link speeds already enabled
[drm] ring test on 0 succeeded in 11 usecs
[drm] ring test on 1 succeeded in 2 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] ring test on 6 succeeded in 2 usecs
[drm] ring test on 7 succeeded in 2 usecs
[drm] ring test on 8 succeeded in 2 usecs
[drm] ring test on 9 succeeded in 4 usecs
[drm] ring test on 10 succeeded in 4 usecs
[drm] ring test on 11 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ring test on 12 succeeded in 15 usecs
[drm] ring test on 13 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] fb mappable at 0xE0528000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Console: switching to colour frame buffer device 240x67
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
amdgpu 0000:01:00.0: registered panic notifier
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded in 0 usecs
[drm] ib test on ring 6 succeeded in 0 usecs
[drm] ib test on ring 7 succeeded in 0 usecs
[drm] ib test on ring 8 succeeded in 0 usecs
[drm] ib test on ring 9 succeeded in 0 usecs
[drm] ib test on ring 10 succeeded in 0 usecs
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] ib test on ring 13 succeeded
[drm] Initialized amdgpu 3.0.0 20150101 for 0000:01:00.0 on minor 0
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input16
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input17
input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input18
input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input19
input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input20
input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input21
init: failsafe main process (673) killed by TERM signal
init: avahi-cups-reload main process (779) terminated with status 1
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
audit: type=1400 audit(1432897649.149:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=754 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
8139too 0000:02:05.0 eth2: link down
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
r8169 0000:04:00.0 eth1: link down
r8169 0000:04:00.0 eth1: link down
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
r8169 0000:04:00.0 eth1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready