dmesg - rk3288
Booting Linux on physical CPU 0x500
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0 (firefly@midserver) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #40 SMP PREEMPT Tue Jan 27 16:12:04 CST 2015
CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
hdmi init vic is -1
rockchip_ion_reserve
cma: CMA: reserved 16 MiB at 2e800000
Memory policy: ECC disabled, Data cache writealloc
On node 0 totalpages: 1044480
free_area_init_node: node 0, pgdat c0d77e80, node_mem_map c0e9d000
Normal zone: 1520 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 194560 pages, LIFO batch:31
HighMem zone: 6640 pages used for memmap
HighMem zone: 849920 pages, LIFO batch:31
PERCPU: Embedded 9 pages/cpu @c2eba000 s14016 r8192 d14656 u36864
pcpu-alloc: s14016 r8192 d14656 u36864 alloc=9*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1042960
Kernel command line: console=tty0 console=ttyS2 earlyprintk root=/dev/block/mtd/by-name/linuxroot rw rootfstype=ext4 init=/sbin/init mtdparts=rk29xxnand:0x00008000@0x00002000(resource),0x00008000@0x0000A000(boot),0x00002000@0x00012000(misc),0x0001a000@0x00014000(backup),-@0x0002e000(linuxroot) storagemedia=emmc loader.timestamp=2015-01-21_17:07:53 hdmi.vic=-1 androidboot.serialno=1006120101000032
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4080MB = 4080MB total
Memory: 4110088k/4110088k available, 67832k reserved, 3399680K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0a8f73c (10782 kB)
.init : 0xc0a90000 - 0xc0cdf6c0 (2366 kB)
.data : 0xc0ce0000 - 0xc0d7f588 ( 638 kB)
.bss : 0xc0d7f588 - 0xc0e9c6c4 (1141 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16 nr_irqs:16 16
rk_clk_tree_init start! cru base = 0xfed00000
rk_get_uboot_display_flag: uboot_logo_on = 0
rkclk_init_clks: cnt_parent = 7
rkclk_init_clks: cnt_rate = 32
Architected local timer running at 24.00MHz (phys).
Switching to timer-based delay loop
sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
process version: 0
channel:0, lkg:0
target-temp:95
channel:2, lkg:0
target-temp:95
channel:0, lkg:0
target-temp:95
channel:1, lkg:0
target-temp:95
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
Console: colour dummy device 80x30
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
/cpus/cpu@0 missing clock-frequency property
/cpus/cpu@1 missing clock-frequency property
/cpus/cpu@2 missing clock-frequency property
/cpus/cpu@3 missing clock-frequency property
CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
Setting up static identity map for 0xc079e508 - 0xc079e560
last_log: 0x2e100000 map to 0xf0004000 and copy to 0xf0086000, size 0x80000 early 0x1428 (version 3.0)
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
CPU2: Booted secondary processor
CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
CPU3: Booted secondary processor
CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
Brought up 4 CPUs
SMP: Total of 4 processors activated (192.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
ion_snapshot: 0x2e1b0000 map to 0xf0107000 and copy to 0xc0e77d14 (version 0.1)
Registered FIQ tty driver
fiq-debugger is disabled in device tree
rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
gpiochip_add: registered GPIOs 0 to 31 on device: gpio0
gpiochip_add: registered GPIOs 32 to 63 on device: gpio1
gpiochip_add: registered GPIOs 64 to 95 on device: gpio2
gpiochip_add: registered GPIOs 96 to 127 on device: gpio3
gpiochip_add: registered GPIOs 128 to 159 on device: gpio4
gpiochip_add: registered GPIOs 160 to 191 on device: gpio5
gpiochip_add: registered GPIOs 192 to 223 on device: gpio6
gpiochip_add: registered GPIOs 224 to 255 on device: gpio7
gpiochip_add: registered GPIOs 256 to 287 on device: gpio8
gpiochip_add: registered GPIOs 288 to 319 on device: gpio15
rockchip_interrupts_register:bank_num=7
of_get_named_gpio_flags exited with status 256
of_get_gpio_init_config:gpio[0] = 256, value = 0
of_get_named_gpio_flags exited with status 233
of_get_gpio_init_config:gpio[1] = 233, value = 0
of_get_named_gpio_flags exited with status 136
of_get_gpio_init_config:gpio[2] = 136, value = 0
rockchip_pinctrl_probe:init ok
rk_iommu ff900800.iep_mmu: (iep) Enter
rk_iommu ff900800.iep_mmu: data->num_res_mem=1
rk_iommu ff900800.iep_mmu: data->num_res_irq=1
rk_iommu ff900800.iep_mmu: res->start = 0xff900800 ioremap to data->res_bases[0] = 0xf0114800
IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
rk_iommu ff900800.iep_mmu: (iep) Initialized
rk_iommu ff950800.vip_mmu: (vip) Enter
rk_iommu ff950800.vip_mmu: data->num_res_mem=1
rk_iommu ff950800.vip_mmu: data->num_res_irq=1
rk_iommu ff950800.vip_mmu: res->start = 0xff950800 ioremap to data->res_bases[0] = 0xf0116800
IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
rk_iommu ff950800.vip_mmu: (vip) Initialized
rk_iommu ff930300.vopb_mmu: (vopb) Enter
rk_iommu ff930300.vopb_mmu: data->num_res_mem=1
rk_iommu ff930300.vopb_mmu: data->num_res_irq=1
rk_iommu ff930300.vopb_mmu: res->start = 0xff930300 ioremap to data->res_bases[0] = 0xf011e300
IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
rk_iommu ff930300.vopb_mmu: (vopb) Initialized
rk_iommu ff940300.vopl_mmu: (vopl) Enter
rk_iommu ff940300.vopl_mmu: data->num_res_mem=1
rk_iommu ff940300.vopl_mmu: data->num_res_irq=1
rk_iommu ff940300.vopl_mmu: res->start = 0xff940300 ioremap to data->res_bases[0] = 0xf012a300
IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
rk_iommu ff940300.vopl_mmu: (vopl) Initialized
rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
rk_iommu ff9c0440.hevc_mmu: data->num_res_mem=2
rk_iommu ff9c0440.hevc_mmu: data->num_res_irq=1
rk_iommu ff9c0440.hevc_mmu: res->start = 0xff9c0440 ioremap to data->res_bases[0] = 0xf012c440
rk_iommu ff9c0440.hevc_mmu: res->start = 0xff9c0480 ioremap to data->res_bases[1] = 0xf012e480
IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
rk_iommu ff9a0800.vpu_mmu: data->num_res_mem=1
rk_iommu ff9a0800.vpu_mmu: data->num_res_irq=1
rk_iommu ff9a0800.vpu_mmu: res->start = 0xff9a0800 ioremap to data->res_bases[0] = 0xf0136800
IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
rk_iommu ff914000.isp_mmu: data->num_res_mem=2
rk_iommu ff914000.isp_mmu: data->num_res_irq=1
rk_iommu ff914000.isp_mmu: res->start = 0xff914000 ioremap to data->res_bases[0] = 0xf0138000
rk_iommu ff914000.isp_mmu: res->start = 0xff915000 ioremap to data->res_bases[1] = 0xf013a000
IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
DDR DEBUG: version 1.00 20140603
DDR DEBUG: Channel a:
DDR DEBUG: DDR3 Device
DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Total Capability=2048MB
DDR DEBUG: Channel b:
DDR DEBUG: DDR3 Device
DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Total Capability=2048MB
DDR DEBUG: addr=0xd85000
DDR DEBUG: stride=13, size=256, halfcap=80000000
DDR DEBUG: socAddr[0]=0xd85000, socAddr[1]=0xd85100
DDR DEBUG: chAddr[0]=0xd85000, chAddr[1]=0xd85000
DDR DEBUG: dtar[0]=0x501b0000, dtar[1]=0x501b0000
DDR DEBUG: init success!!! freq=200MHz
DDR DEBUG: Channel a:
DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=180,180
DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=180,180
DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=180,180
DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=180,180
DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
DDR DEBUG: Channel b:
DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=180,180
DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=180,180
DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=180,180
DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=180,180
DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
bio: create slab at 0
Enter firefly_noatx8_init
of_get_named_gpio_flags exited with status 245
firefly_noatx8_probe 51
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
of_get_named_gpio_flags exited with status 14
of_get_named_gpio_flags exited with status 12
of_get_named_gpio_flags exited with status 15
of_get_named_gpio_flags exited with status 16
rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
of_get_named_gpio_flags exited with status 260
of_get_named_gpio_flags exited with status 261
rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
of_get_named_gpio_flags exited with status 201
of_get_named_gpio_flags exited with status 202
rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
of_get_named_gpio_flags exited with status 81
of_get_named_gpio_flags exited with status 80
rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
of_get_named_gpio_flags exited with status 241
of_get_named_gpio_flags exited with status 242
rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
rockchip_temp_probe,line=362
tsadc ff280000.tsadc: initialized
rockchip_ion_parse_dt: num_heaps = 1
0: 0 3 vmalloc 0x (null)
Rockchip ion module is successfully loaded (v1.0)
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
act8846_i2c_probe,line=898
act8846_parse_dt,line=746
of_get_named_gpio_flags exited with status 238
of_get_named_gpio_flags exited with status 1
of_get_named_gpio_flags exited with status 234
of_get_named_gpio_flags exited with status 259
act8846_i2c_probe: act8846_pmic_hold=1
act8846_i2c_probe: act8846_pmic_sleep=1
act8846_i2c_probe: act8846_pmic_cpu_det_gpio=1
act8846_i2c_probe: act8846_pmic_usb_hub_reset_gpio=1
act_dcdc1: 1200 mV
vccio: 3300 mV
vdd_logic: 700 1500 mV at 1100 mV
act_dcdc4: 2000 mV
vccio_sd: 1800 3300 mV at 3300 mV
act_ldo2: 1050 mV
act_ldo3: 2800 mV
act_ldo4: 3300 mV
act_ldo5: 3300 mV
act_ldo6: 1100 mV
vcc_18: 1800 mV
act_ldo8: 1850 mV
vdd_arm: 712 1500 mV at 1000 mV
vdd_gpu: 712 1500 mV at 1000 mV
rk808_i2c_probe,line=1368
The device is not rk808 -11
rk808: probe of 0-001b failed with error -11
Switching to clocksource arch_sys_counter
rk-fb rockchip-fb: rk fb ion client create success!
rk-fb rockchip-fb: rockchip framebuffer driver probe
rk-screen rk_screen.8: rockchip screen probe success
rk32-lvds rk32-lvds: rk32 lvds driver probe success
rk32-edp ff970000.edp: screen is not edp!
rk32-edp: probe of ff970000.edp failed with error -22
rk3288-lcdc lcdc0: can't find power_ctr node for lcdc0
graphics fb0: rockchip framebuffer registerd:fb0
graphics fb1: rockchip framebuffer registerd:fb1
graphics fb2: rockchip framebuffer registerd:fb2
graphics fb3: rockchip framebuffer registerd:fb3
graphics fb4: rockchip framebuffer registerd:fb4
rk_iommu ff930300.vopb_mmu: (vopb) Enabled
rk_iommu ff930300.vopb_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x2e23b000
rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
rk3288-lcdc lcdc0: wakeup from standby!
alloc_buffer:ion_phy_addr=0x10000000
fb0:phy:10000000>>vir:f0191000>>len:0x1800000
rk3288-lcdc lcdc0: lcdc0 probe ok, iommu enabled
rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 2516K (c4bf0000 - c4e65000)
hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
probe device ff9a0000.vpu_service
vpu_service: power on
checking hw id 4831
vpu_service set to auto frequency mode
vcodec vpu_service: vcodec ion client create success!
vpu_service: power off...
done
init success
probe device ff9c0000.hevc_service
hevc_service: power on
checking hw id 6867
vcodec hevc_service: vcodec ion client create success!
hevc_service: power off...
done
init success
rknandbase v1.0 2014-03-31
rknand_probe clk rate = 148500000
rknand_driver:ret = 0
audit: initializing netlink socket (disabled)
type=2000 audit(1.280:1): initialized
bounce pool size: 64 pages
fuse init (API version 7.22)
msgmni has been set to 1424
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Console: switching to colour frame buffer device 240x67
rga ff920000.rga: rga ion client create success!
rga: Driver loaded succesfully
IEP Power ON
iep ion client create success!
rk_iommu ff900800.iep_mmu: (iep) Enabled
rk_iommu ff900800.iep_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x2e235000
IEP Power OFF
rk_iommu ff900800.iep_mmu: (iep) Disabled
rk_iommu ff900800.iep_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e235000
IEP Driver loaded succesfully
Module initialized.
dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
dma-pl330 ffb20000.pdma: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
dma-pl330 ff250000.pdma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
pwm-voltage-regulator pwm_regulator.22: unable to request PWM, trying legacy API
pwm-voltage-regulator pwm_regulator.22: unable to request legacy PWM
pwm_regulator_probe:error
platform pwm_regulator.22: Driver pwm-voltage-regulator requests probe deferral
rk_serial.c v1.8 2014-03-04
console [ttyS2] enabled
loop: module loaded
SCSI Media Changer driver v0.25
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
stmmac_probe_config_dt: Can not read property: pmu_regulator.
stmmac_probe_config_dt: Can not read property: pmu_enable_level.
stmmac_probe_config_dt: clock input or output? (input).
stmmac_probe_config_dt: TX delay(0x30).
stmmac_probe_config_dt: RX delay(0x20).
of_get_named_gpio_flags exited with status 136
of_get_named_gpio_flags: can't parse gpios property
stmmac_probe_config_dt: is rockchip,rk3288-gmac
stmmc_pltfr_init:
stmmc_pltfr_init: ERROR: Get power-gpio failed.
_gpio_request: gpio-136 (gmac_phy_reset) status -16
stmmc_pltfr_init: ERROR: Request gmac phy reset pin failed.
stmmc_pltfr_init: init for RGMII
tx delay=0x30
rx delay=0x20
stmmac - user ID: 0x10, Synopsys ID: 0x35
Normal descriptors
Ring mode enabled
DMA HW capability register supported
RX Checksum Offload Engine supported (type 2)
TX Checksum insertion supported
Wake-Up On Lan supported
Enable RX Mitigation via HW Watchdog Timer
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
CSLIP: code copyright 1989 Regents of the University of California.
Rockchip WiFi SYS interface (V1.00) ...
usbcore: registered new interface driver catc
usbcore: registered new interface driver kaweth
pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
usbcore: registered new interface driver rtl8150
usbcore: registered new interface driver r8152
usbcore: registered new interface driver hso
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver cdc_eem
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver dm9620
usbcore: registered new interface driver smsc75xx
usbcore: registered new interface driver smsc95xx
usbcore: registered new interface driver gl620a
usbcore: registered new interface driver net1080
usbcore: registered new interface driver plusb
usbcore: registered new interface driver rndis_host
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver MOSCHIP usb-ethernet driver
usbcore: registered new interface driver int51x1
usbcore: registered new interface driver kalmia
usbcore: registered new interface driver ipheth
usbcore: registered new interface driver sierra_net
usbcore: registered new interface driver cx82310_eth
usbcore: registered new interface driver cdc_ncm
usbcore: registered new interface driver qmi_wwan
usbcore: registered new interface driver cdc_mbim
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_rk_probe f1a00000 f1a00010
rockchip_ehci_host ff500000.usb: Rockchip On-Chip EHCI Host Controller
rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
rockchip_ehci_host ff500000.usb: USB 0.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Rockchip On-Chip EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
usb usb1: SerialNumber: ff500000.usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci_rk_probe ok
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums_eneub6250
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver option
usbcore: registered new interface driver trancevibrator
usb20_otg: version 3.10a 21-DEC-2012
f1a80040
Core Release: 3.10a
Setting default values for core params
Using Buffer DMA mode
Periodic Transfer Interrupt Enhancement - disabled
Multiprocessor Interrupt Enhancement - disabled
OTG VER PARAM: 0, OTG VER FLAG: 0
^^^^^^^^^^^^^^^^^Device Mode
Dedicated Tx FIFOs mode
pcd_init otg_dev = ee372900
usb20_otg ff580000.usb: DWC OTG Controller
usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
usb20_otg ff580000.usb: irq 55, io mem 0x00000000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: DWC OTG Controller
usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
usb usb2: SerialNumber: ff580000.usb
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usb20_host: version 3.10a 21-DEC-2012
f1b00040
Core Release: 3.10a
Setting default values for core params
Using Buffer DMA mode
Periodic Transfer Interrupt Enhancement - disabled
Multiprocessor Interrupt Enhancement - disabled
OTG VER PARAM: 0, OTG VER FLAG: 0
^^^^^^^^^^^^^^^^^^Host Mode
usb20_host ff540000.usb: DWC OTG Controller
usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
usb20_host ff540000.usb: irq 57, io mem 0x00000000
Init: Power Port (0)
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: DWC OTG Controller
usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
usb usb3: SerialNumber: ff540000.usb
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
.. rk pwm remotectl v1.0 init
remotectl probe j=0x0
input: ff680000.pwm as /devices/ff680000.pwm/input/input0
pwm enable val=0x646205
usbcore: registered new interface driver xpad
usbcore: registered new interface driver usb_acecad
usbcore: registered new interface driver aiptek
usbcore: registered new interface driver gtco
usbcore: registered new interface driver hanwang
usbcore: registered new interface driver kbtab
usbcore: registered new interface driver wacom
sensor_register_slave:mma8452,id=17
sensor_register_slave:cm3217,id=44
sensor_register_slave:cm3218,id=45
tchip_rm_init is here!
input: tchip_remote_key as /devices/virtual/input/input1
tchiprm_register_device is here!
input: tchip_remote_touch as /devices/virtual/input/input2
iep dpi mode inactivity
tchip_remote_abs_register_device is here!
input: tchip_remote_gsensor as /devices/virtual/input/input3
tchip_remote_gsensor_register_device is here!
rtc_hym8563 0-0051: clock/calendar information is no longer guaranteed
of_get_named_gpio_flags exited with status 228
rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
i2c /dev entries driver
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR SANYO protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
CamSys driver version: v0.19.0, CamSys head file version: v0.8.0
of_get_named_gpio_flags exited with status 236
D1:camsys_platform_probe(1061): 1-gpios-cifpower: gpio=236
of_get_named_gpio_flags exited with status 236
D1:camsys_platform_probe(1064): gpios-cifpower: gpio_request
D1:camsys_platform_probe(1066): 1-gpios-cifpower: gpio_request=0
D1:camsys_platform_probe(1075): gpios-cifpower: 236 high
D1:camsys_mipiphy_probe_cb(163): ff910000.isp mipi phy0 probe success(reg_phy: 0x0 reg_vir: 0x0 size: 0x0)
D1:camsys_mipiphy_probe_cb(160): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000 reg_vir: 0xf19b0000 size: 0x4000)
D1:camsys_platform_probe(1208): ff910000.isp memory:
D1:camsys_platform_probe(1218): Register memory (phy: 0xff910000 vir: 0xf19e0000 size: 0x10000)
D1:camsys_platform_probe(1213): I2c memory (phy: 0x2da2e000 vir: 0xeda2e000 size: 0x1000)
D1:camsys_platform_probe(1233): Probe ff910000.isp device success
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCILL protocol initialized
cpufreq version 1.0, suspend freq 1200 MHz
cpuidle: using governor ladder
cpuidle: using governor menu
Synopsys Designware Multimedia Card Interface Driver
dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
3230..dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
Line3235..dw_mci_init_slot: The rk_sdmmc Ver 1.12 2014-07-08
of_get_named_gpio_flags: can't parse gpios property
1357..dw_mci_set_ios: no card. [mmc0]
1357..dw_mci_set_ios: no card. [mmc0]
rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
3224..dw_mci_init_slot: fmin=300000, fmax=50000000 [mmc1]
of_get_named_gpio_flags: can't parse gpios property
1357..dw_mci_set_ios: no card. [mmc1]
1357..dw_mci_set_ios: no card. [mmc1]
dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
mmc0: BKOPS_EN bit is not set
dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
rk_sdmmc: BOOT Bus speed=0Hz,Bus width=8bits.[mmc0]
3230..dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
of_get_named_gpio_flags: can't parse gpios property
1357..dw_mci_set_ios: no card. [mmc2]
1357..dw_mci_set_ios: no card. [mmc2]
dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
leds-gpio leds.30: pins are not configured from the driver
of_get_named_gpio_flags exited with status 257
of_get_named_gpio_flags exited with status 258
of_get_named_gpio_flags exited with status 257
of_get_named_gpio_flags exited with status 258
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
of_get_named_gpio_flags exited with status 5
of_get_named_gpio_flags exited with status 5
input: rk29-keypad as /devices/ff100000.adc/key.33/input/input4
rockchip-pinctrl ff770000.pinctrl: pin gpio6-8 already requested by ; cannot claim for 2-0010
rockchip-pinctrl ff770000.pinctrl: pin-200 (2-0010) status -22
rockchip-pinctrl ff770000.pinctrl: could not request pin 200 on device rockchip-pinctrl
ES8323 2-0010: Error applying setting, reverse things back
of_get_named_gpio_flags exited with status 10
of_get_named_gpio_flags exited with status 239
es8323 probe i2c recv ok
i2c-core: driver [ES8323] using legacy suspend method
i2c-core: driver [ES8323] using legacy resume method
rockchip-hdmi-spdif rockchip-hdmi-spdif.26: ASoC: CPU DAI (null) not registered
rockchip_hdmi_spdif_audio_probe() register card failed:-517
platform rockchip-hdmi-spdif.26: Driver rockchip-hdmi-spdif requests probe deferral
es8323_probe
es8323_probe:register ISR (irq=194)
mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
rk_sdmmc: BOOT
execute tuning: candidates_degree = SDMMC_SHIFT_DEGREE_0 SDMMC_SHIFT_DEGREE_90 SDMMC_SHIFT_DEGREE_180 SDMMC_SHIFT_DEGREE_INVALID[mmc0]
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 BWBC3R 29.1 GiB
ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> NULL --> Left Line Mux
mtd: partition size too small (7)
resource: 0x000400000 -- 0x001400000 (16 MB)
boot: 0x001400000 -- 0x002400000 (16 MB)
misc: 0x002400000 -- 0x002800000 (4 MB)
backup: 0x002800000 -- 0x005c00000 (52 MB)
linuxroot: 0x005c00000 -- 0x747800000 (29724 MB)
mmcblk0: p1 p2 p3 p4 p51357..dw_mci_set_ios: no card. [mmc1]
1357..dw_mci_set_ios: no card. [mmc2]
ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> NULL -> Left Line Mux
ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> NULL --> Left Line Mux
ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> NULL -> Left Line Mux
dwc_otg_hcd_enable, enable host controller
ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> NULL --> Left Line Mux
ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> NULL -> Left Line Mux
ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> NULL --> Right Line Mux
ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> NULL -> Right Line Mux
ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> NULL --> Right Line Mux
ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> NULL -> Right Line Mux
ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> NULL --> Right Line Mux
ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> NULL -> Right Line Mux
ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left PGA Mux
ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left PGA Mux
ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left PGA Mux
Using Buffer DMA mode
Periodic Transfer Interrupt Enhancement - disabled
Multiprocessor Interrupt Enhancement - disabled
OTG VER PARAM: 0, OTG VER FLAG: 0
^^^^^^^^^^^^^^^^^^Host Mode
ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left PGA Mux
Init: Power Port (0)
ES8323 2-0010: ASoC: no dapm match for Differential Mux --> LAMP --> Left PGA Mux
ES8323 2-0010: ASoC: Failed to add route Differential Mux -> LAMP -> Left PGA Mux
ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right PGA Mux
ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right PGA Mux
ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right PGA Mux
ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right PGA Mux
ES8323 2-0010: ASoC: no dapm match for Differential Mux --> RAMP --> Right PGA Mux
ES8323 2-0010: ASoC: Failed to add route Differential Mux -> RAMP -> Right PGA Mux
ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Differential Mux
ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Differential Mux
ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Differential Mux
ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Differential Mux
ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Differential Mux
ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Differential Mux
ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Differential Mux
ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Differential Mux
Indeed it is in host mode hprt0 = 00021501
ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left Line Mux
ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left Line Mux
ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left Line Mux
ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left Line Mux
ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> LAMP --> Left Line Mux
ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> LAMP -> Left Line Mux
ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right Line Mux
ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right Line Mux
ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right Line Mux
ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right Line Mux
ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> RAMP --> Right Line Mux
ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> RAMP -> Right Line Mux
ES8323 2-0010: ASoC: mux Right Line Mux has no paths
ES8323 2-0010: ASoC: mux Left Line Mux has no paths
ES8323 2-0010: ASoC: mux Right PGA Mux has no paths
ES8323 2-0010: ASoC: mux Left PGA Mux has no paths
ES8323 2-0010: ASoC: mux Differential Mux has no paths
usb 3-1: new high-speed USB device number 2 using usb20_host
Indeed it is in host mode hprt0 = 00001101
Enter::rk29_es8323_init----135
rockchip-es8323 rockchip-es8323.28: ES8323 HiFi rockchip-i2s.0 mapping ok
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
Ebtables v2.0 registered
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
usb 3-1: New USB device found, idVendor=1a40, idProduct=0101
usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: USB 2.0 Hub [MTT]
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
l2tp_core: L2TP core driver, V2.0
l2tp_ppp: PPPoL2TP kernel driver, V2.0
[WLAN_RFKILL]: Enter rfkill_wlan_init
[WLAN_RFKILL]: Enter rfkill_wlan_probe
wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
[WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
[WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
of_get_named_gpio_flags exited with status 156
[WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
of_get_named_gpio_flags: can't parse gpios property
of_get_named_gpio_flags exited with status 158
[WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
[WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
[WLAN_RFKILL]: Exit rfkill_wlan_probe
[BT_RFKILL]: Enter rfkill_rk_init
of_get_named_gpio_flags exited with status 147
[BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
of_get_named_gpio_flags exited with status 155
[BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 155.
of_get_named_gpio_flags exited with status 157
[BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
of_get_named_gpio_flags exited with status 154
[BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
of_get_named_gpio_flags exited with status 159
[BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
[BT_RFKILL]: Request irq for bt wakeup host
[BT_RFKILL]: ** disable irq
[BT_RFKILL]: ap6335 device registered.
usb 3-1.1: new full-speed USB device number 3 using usb20_host
usb 3-1.1: New USB device found, idVendor=413c, idProduct=2101
usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.1: Product: Dell Smart Card Reader Keyboard
usb 3-1.1: Manufacturer: Dell
input: Dell Dell Smart Card Reader Keyboard as /devices/ff540000.usb/usb3/3-1/3-1.1/3-1.1:1.0/input/input5
hid-generic 0003:413C:2101.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell Dell Smart Card Reader Keyboard] on usb-ff540000.usb-1.1/input0
usb 3-1.4: new low-speed USB device number 4 using usb20_host
usb 3-1.4: New USB device found, idVendor=046d, idProduct=c045
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: USB-PS/2 Optical Mouse
usb 3-1.4: Manufacturer: Logitech
input: Logitech USB-PS/2 Optical Mouse as /devices/ff540000.usb/usb3/3-1/3-1.4/3-1.4:1.0/input/input6
hid-generic 0003:046D:C045.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-ff540000.usb-1.4/input0
******** Show Sink Info ********
Max tmds clk is 0
Support video mode:
1920x1080p@60Hz
1920x1080p@50Hz
1280x720p@60Hz
1280x720p@50Hz
720x576p@50Hz
720x480p@60Hz
Support video color mode:
RGB
YCbCr422
YCbCr444
Support video color depth:
24bit
30bit
36bit
Support audio type:
LPCM
Support max audio channel is 2
Support audio sample rate:
32000
44100
48000
Support audio word lenght:
16bit
20bit
24bit
******** Show Sink Info ********
rk_fb_switch_screen lcdc_id 0 type 6 enable 1
fb0 win id 1 state 1
rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
fb1 win id 0 state 0
fb2 win id 2 state 0
fb3 win id 3 state 0
fb4 win id 4 state 0
rk_fb_switch_screen lcdc_id 0 type 6 enable 1 done
pixel clk is 148500000 tmds clk is 148500000
rk3288-hdmi ff980000.hdmi: [hdmi_dev_config_video] sucess output HDMI.
phy_int 0x01 i2cm_int 0x00 phy_i2cm_int 0x00 cec_int 0x00 aud_int 0x02
phy_stat is 0xf3 phy_pol 0xf3 phy_int 0x02
new phy pol is 0xfd cur pol is 0xf1
audio int is 0x02
rk3288-hdmi ff980000.hdmi: rk3288 hdmi probe sucess.
VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
rk3288_init_suspend
rk3288_suspend_init enter
rk3288_suspend_init: pm_ctrbits =40017
gpio_get_dts_info suspend:8
gpio_get_dts_info resume:8
rockchip,pmic-suspend_gpios:1007c30 1007c40 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
rockchip,pmic-resume_gpios:2007c32 2007c42 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
clks_gating_suspend_init:clkgt info ok
Registering SWP/SWPB emulation handler
ddrfreq: verion 1.2 20140526
ddrfreq: normal 456MHz video_1080p 0MHz video_4k 456MHz dualview 0MHz idle 0MHz suspend 200MHz reboot 456MHz
ddrfreq: auto-freq=0
ddrfreq: auto-freq-table[0] 240MHz
ddrfreq: auto-freq-table[1] 324MHz
ddrfreq: auto-freq-table[2] 456MHz
ddrfreq: auto-freq-table[3] 528MHz
ddrfreq: change freq to 456 MHz when normal
act_ldo3: operation not allowed
vga_edid_probe: turn on ldo3 done.
act_ldo4: operation not allowed
vga_edid_probe: turn on ldo done.
act_ldo2: operation not allowed
vga_edid_probe: turn on ldo2 done.
act_ldo8: operation not allowed
vga_edid_probe: turn on ldo done.
of_get_named_gpio_flags exited with status 17
unable to read EDID block.
unable to read EDID block.
unable to read EDID block.
vga-ddc: read and parse edid failed errno:-5.
vga_edid_probe: success. 10
firefly_vga_get_enable 180, 0
firefly_vga_get_status 186
firefly_vga_set_enable 159 enable:0
regulator-dummy: disabling
rockchip-hdmi-spdif rockchip-hdmi-spdif.26: ASoC: CPU DAI (null) not registered
rockchip_hdmi_spdif_audio_probe() register card failed:-517
platform rockchip-hdmi-spdif.26: Driver rockchip-hdmi-spdif requests probe deferral
pcd_pullup, is_on 0
file system registered
android_usb gadget: Mass Storage Function, version: 2009/09/11
android_usb gadget: Number of LUNs=2
lun0: LUN: removable file: (no medium)
lun1: LUN: removable file: (no medium)
android_usb gadget: android_usb ready
sensor_init: Probe name sensors
sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
rtc_hym8563 0-0051: setting system clock to 2011-01-01 12:00:04 UTC (1293883204)
usbcore: registered new interface driver snd-usb-audio
ALSA device list:
#0: RK_ES8323
rockchip-hdmi-spdif rockchip-hdmi-spdif.26: rk-hdmi-spdif-hifi rockchip-spdif mapping ok
Freeing unused kernel memory: 2364K (c0a90000 - c0cdf000)
udevd[147]: starting version 175
EXT4-fs (mmcblk0p5): recovery complete
EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
init: plymouth-upstart-bridge main process (299) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (309) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: ureadahead main process (302) terminated with status 5
init: plymouth-upstart-bridge main process (312) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: mounted-proc main process (326) terminated with status 1
systemd-udevd[429]: starting version 204
[BT_RFKILL]: ENABLE UART_RTS
[BT_RFKILL]: DISABLE UART_RTS
[BT_RFKILL]: bt turn on power
systemd-udevd[455]: could not open moddep file '/lib/modules/3.10.0/modules.dep.bin'
[BT_RFKILL]: ENABLE UART_RTS
[BT_RFKILL]: DISABLE UART_RTS
[BT_RFKILL]: bt turn on power
init: patchram main process (571) terminated with status 5
[BT_RFKILL]: ENABLE UART_RTS
[BT_RFKILL]: DISABLE UART_RTS
[BT_RFKILL]: bt turn on power
wifi_power_write: poweren = 1
[WLAN_RFKILL]: rockchip_wifi_power: 1
[WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
[WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
init: failsafe main process (606) killed by TERM signal
[WLAN_RFKILL]: wifi turn on power. 156
mali pd enabled
clk enabled
MALI_DVFS_STEP=4,div_dvfs=10
mali_dvfs_infotbl[0].clock=198000,min_threshold=0,max_threshold=70
mali_dvfs_infotbl[1].clock=297000,min_threshold=70,max_threshold=80
mali_dvfs_infotbl[2].clock=417000,min_threshold=80,max_threshold=90
mali_dvfs_infotbl[3].clock=480000,min_threshold=94,max_threshold=100
turn on mali power
mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
mali ffa30000.gpu: Probed as mali0
init: plymouth-upstart-bridge main process ended, respawning
rk_fb_switch_screen lcdc_id 0 type 6 enable 0
rk_iommu ff930300.vopb_mmu: (vopb) Disabled
rk_iommu ff930300.vopb_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e23b000
rk3288-lcdc lcdc0: blank mode:1
rk_iommu ff930300.vopb_mmu: (vopb) Enabled
rk_iommu ff930300.vopb_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x2e23b000
rk3288-lcdc lcdc0: blank mode:0
phy_int 0x3d i2cm_int 0x00 phy_i2cm_int 0x00 cec_int 0x00 aud_int 0x00
phy_stat is 0xf2 phy_pol 0xf3 phy_int 0x02
new phy pol is 0xfd cur pol is 0xf1
******** Show Sink Info ********
Max tmds clk is 0
Support video mode:
1920x1080p@60Hz
1920x1080p@50Hz
1280x720p@60Hz
1280x720p@50Hz
720x576p@50Hz
720x480p@60Hz
Support video color mode:
RGB
YCbCr422
YCbCr444
Support video color depth:
24bit
30bit
36bit
Support audio type:
LPCM
Support max audio channel is 2
Support audio sample rate:
32000
44100
48000
Support audio word lenght:
16bit
20bit
24bit
******** Show Sink Info ********
rk_fb_switch_screen lcdc_id 0 type 6 enable 1
fb0 win id 1 state 1
rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
fb1 win id 0 state 0
fb2 win id 2 state 0
fb3 win id 3 state 0
fb4 win id 4 state 0
rk_fb_switch_screen lcdc_id 0 type 6 enable 1 done
pixel clk is 148500000 tmds clk is 148500000
rk3288-hdmi ff980000.hdmi: [hdmi_dev_config_video] sucess output HDMI.
audio int is 0x02
=======================================================
==== Launching Wi-Fi driver! (Powered by Rockchip) ====
=======================================================
WiFi driver (Powered by Rockchip,Ver 4.80.WFD.OOB) init.
======== PULL WL_REG_ON HIGH! ========
[WLAN_RFKILL]: rockchip_wifi_power: 1
[WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
[WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[WLAN_RFKILL]: wifi turn on power. 156
mmc2:mmc host rescan start!
=========== WLAN placed in POWER ON ========
bcmsdh_register: Linux Kernel SDIO/MMC Driver
Dongle Host Driver, version 1.88.45.3 (r420671)
rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc2]
mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=4bits.[mmc2]
mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
mmc2: new high speed SDIO card at address 0001
[WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
alloc static buf at edbc0000!
FW_PATH = /system/etc/firmware/fw_bcm4339a0_ag.bin
NVRAM_PATH = /system/etc/firmware/nvram_AP6335.txt
F1 signature OK, socitype:0x1 chip:0x4339 rev:0x1 pkg:0x2
DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
wl_create_event_handler(): thread:wl_event_handler:3f6 started
tsk Enter, tsk = 0xedbbe664
dhd_attach(): thread:dhd_watchdog_thread:3f7 started
dhd_attach(): thread:dhd_dpc:3f8 started
dhd_attach(): thread:dhd_sysioc:3f9 started
[WLAN_RFKILL]: rockchip_wifi_mac_addr: enter.
[WLAN_RFKILL]: falsh wifi_custom_mac_addr=[00:00:00:00:00:00]
[WLAN_RFKILL]: This mac address is not valid, ignored...
Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
======== PULL WL_REG_ON LOW! (flag = 2) ========
[WLAN_RFKILL]: rockchip_wifi_power: 0
[WLAN_RFKILL]: wifi shut off power.
[WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0
[WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
=========== WLAN placed in RESET ========
Dongle Host Driver, version 1.88.45.3 (r420671)
wl_android_wifi_on in 1
wl_android_wifi_on in 2: g_wifi_on=0
======== PULL WL_REG_ON HIGH! (flag = 2) ========
[WLAN_RFKILL]: rockchip_wifi_power: 1
[WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
[WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[WLAN_RFKILL]: wifi turn on power. 156
=========== WLAN going back to live ========
sdio_reset_comm():
mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 400000Hz for init[mmc2]
mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
es8323_create file error
mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
dhd_bus_devreset: == WLAN ON ==
dhd_bus_devreset called when dongle is not in reset
Will call dhd_bus_start instead
dhd_conf_set_fw_name_by_chip: firmware_path=/system/etc/firmware/fw_bcm4339a0_ag.bin
Final fw_path=/system/etc/firmware/fw_bcm4339a0_ag.bin
Final nv_path=/system/etc/firmware/nvram_AP6335.txt
Final conf_path=/system/etc/firmware/config.txt
NVRAM version: AP6335_NVRAM_V1.2_01092014
dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
bcmsdh_set_drvdata: Enter
bcmsdh_register_oob_intr: Enter
bcmsdh_register_oob_intr: IRQ=196 Type=414
dhd_conf_set_band: Set band 0
[WLAN_RFKILL]: rockchip_wifi_mac_addr: enter.
[WLAN_RFKILL]: falsh wifi_custom_mac_addr=[00:00:00:00:00:00]
[WLAN_RFKILL]: This mac address is not valid, ignored...
Firmware up: op_mode=0x0005, Broadcom Dongle Host Driver mac=04:e6:76:46:94:5c
dhd_conf_set_country: Set country ALL, revision 0
dhd_conf_set_country: country code setting failed -2
Country code: US (US/0)
dhd_conf_set_roam: Set roam_off 1
dhd_conf_set_bw: Enable HT40 in 2.4 GHz
Firmware version = wl0: Jul 25 2013 00:04:02 version 6.37.32.5 (r414538)
Driver: 1.88.45.3 (r420671)
Firmware: wl0: Jul 25 2013 00:04:02 version 6.37.32.5 (r414538)
wl_android_wifi_on: Success
wl_android_wifi_off in 1
wl_android_wifi_off in 2: g_wifi_on=1
bcmsdh_set_irq: Flag = 0
======== PULL WL_REG_ON LOW! (flag = 2) ========
[WLAN_RFKILL]: rockchip_wifi_power: 0
[WLAN_RFKILL]: wifi shut off power.
[WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0
[WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
=========== WLAN placed in RESET ========
wl_android_wifi_off out
wl_android_wifi_on in 1
wl_android_wifi_on in 2: g_wifi_on=0
======== PULL WL_REG_ON HIGH! (flag = 2) ========
[WLAN_RFKILL]: rockchip_wifi_power: 1
[WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
[WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[WLAN_RFKILL]: wifi turn on power. 156
=========== WLAN going back to live ========
sdio_reset_comm():
mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 400000Hz for init[mmc2]
mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
dhd_conf_set_fw_name_by_chip: firmware_path=/system/etc/firmware/fw_bcm4339a0_ag.bin
Final fw_path=/system/etc/firmware/fw_bcm4339a0_ag.bin
Final nv_path=/system/etc/firmware/nvram_AP6335.txt
Final conf_path=/system/etc/firmware/config.txt
NVRAM version: AP6335_NVRAM_V1.2_01092014
bcmsdh_set_drvdata: Enter
bcmsdh_set_irq: Flag = 1
dhd_conf_set_band: Set band 0
[WLAN_RFKILL]: rockchip_wifi_mac_addr: enter.
[WLAN_RFKILL]: falsh wifi_custom_mac_addr=[00:00:00:00:00:00]
[WLAN_RFKILL]: This mac address is not valid, ignored...
dhd_conf_set_country: Set country ALL, revision 0
dhd_conf_set_country: country code setting failed -2
Country code: US (US/0)
dhd_conf_set_roam: Set roam_off 1
dhd_conf_set_bw: Enable HT40 in 2.4 GHz
Driver: 1.88.45.3 (r420671)
Firmware: wl0: Jul 25 2013 00:04:02 version 6.37.32.5 (r414538)
wl_android_wifi_on: Success
phy_power_on: enable = 1
Read the Ethernet MAC address from IDB:00:00:00:00:00:00
eth0: device MAC address 76:b9:0c:0c:e8:15
libphy: stmmac: probed
eth0: PHY ID 001cc915 at 0 IRQ 0 (stmmac-0:00) active
eth0: PHY ID 001cc915 at 1 IRQ 0 (stmmac-0:01) active
phy_power_on: enable = 0
phy_power_on: enable = 1
eth0: device MAC address 76:b9:0c:0c:e8:15
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
wl_bss_connect_done succeeded with 6c:70:9f:e2:bb:2e
wl_notify_connect_status nothing
wl_bss_connect_done succeeded with 6c:70:9f:e2:bb:2e
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
bcmsdh_sdmmc: Failed to Read byte F1:@0x1001f=ff, Err: -84
init: upstart-udev-bridge main process (423) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (868) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (871) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
rk3288-lcdc lcdc0: blank mode:0
rk_fb_switch_screen lcdc_id 0 type 6 enable 0
rk_iommu ff930300.vopb_mmu: (vopb) Disabled
rk_iommu ff930300.vopb_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e23b000
rk3288-lcdc lcdc0: blank mode:1
rk3288-lcdc lcdc0: blank mode:4
ddrfreq: change auto self refresh to 1 when suspend
ddrfreq: change freq to 200 MHz when suspend
ddrfreq: change auto self refresh to 0 when normal
ddrfreq: change freq to 456 MHz when normal
rk_iommu ff930300.vopb_mmu: (vopb) Enabled
rk_iommu ff930300.vopb_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x2e23b000
rk3288-lcdc lcdc0: blank mode:0
rk3288-lcdc lcdc0: blank mode:0
phy_int 0x3d i2cm_int 0x02 phy_i2cm_int 0x00 cec_int 0x00 aud_int 0x00
phy_stat is 0xf2 phy_pol 0xf3 phy_int 0x02
new phy pol is 0xfd cur pol is 0xf1
******** Show Sink Info ********
Max tmds clk is 0
Support video mode:
1920x1080p@60Hz
1920x1080p@50Hz
1280x720p@60Hz
1280x720p@50Hz
720x576p@50Hz
720x480p@60Hz
Support video color mode:
RGB
YCbCr422
YCbCr444
Support video color depth:
24bit
30bit
36bit
Support audio type:
LPCM
Support max audio channel is 2
Support audio sample rate:
32000
44100
48000
Support audio word lenght:
16bit
20bit
24bit
******** Show Sink Info ********
rk_fb_switch_screen lcdc_id 0 type 6 enable 1
fb0 win id 1 state 1
rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
fb1 win id 0 state 0
fb2 win id 2 state 0
fb3 win id 3 state 0
fb4 win id 4 state 0
rk_fb_switch_screen lcdc_id 0 type 6 enable 1 done
pixel clk is 148500000 tmds clk is 148500000
rk3288-hdmi ff980000.hdmi: [hdmi_dev_config_video] sucess output HDMI.
audio int is 0x02
rk3288-lcdc lcdc0: blank mode:0
rk_fb_switch_screen lcdc_id 0 type 6 enable 0
rk_iommu ff930300.vopb_mmu: (vopb) Disabled
rk_iommu ff930300.vopb_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e23b000
rk3288-lcdc lcdc0: blank mode:1
rk3288-lcdc lcdc0: blank mode:4
ddrfreq: change auto self refresh to 1 when suspend
ddrfreq: change freq to 200 MHz when suspend
ddrfreq: change auto self refresh to 0 when normal
ddrfreq: change freq to 456 MHz when normal
rk_iommu ff930300.vopb_mmu: (vopb) Enabled
rk_iommu ff930300.vopb_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x2e23b000
rk3288-lcdc lcdc0: blank mode:0
rk3288-lcdc lcdc0: blank mode:0
phy_int 0x3d i2cm_int 0x00 phy_i2cm_int 0x00 cec_int 0x00 aud_int 0x00
phy_stat is 0xf2 phy_pol 0xf3 phy_int 0x02
new phy pol is 0xfd cur pol is 0xf1
******** Show Sink Info ********
Max tmds clk is 0
Support video mode:
1920x1080p@60Hz
1920x1080p@50Hz
1280x720p@60Hz
1280x720p@50Hz
720x576p@50Hz
720x480p@60Hz
Support video color mode:
RGB
YCbCr422
YCbCr444
Support video color depth:
24bit
30bit
36bit
Support audio type:
LPCM
Support max audio channel is 2
Support audio sample rate:
32000
44100
48000
Support audio word lenght:
16bit
20bit
24bit
******** Show Sink Info ********
rk_fb_switch_screen lcdc_id 0 type 6 enable 1
fb0 win id 1 state 1
rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
fb1 win id 0 state 0
fb2 win id 2 state 0
fb3 win id 3 state 0
fb4 win id 4 state 0
rk_fb_switch_screen lcdc_id 0 type 6 enable 1 done
pixel clk is 148500000 tmds clk is 148500000
rk3288-hdmi ff980000.hdmi: [hdmi_dev_config_video] sucess output HDMI.
audio int is 0x02