dmesg - raid10n3-cfq
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-0.bpo.4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.16.7-ckt9-2~bpo70+1 (2015-04-21)
Command line: BOOT_IMAGE=/vmlinuz-3.14-0.bpo.1-amd64 root=/dev/mapper/sysvg-root ro quiet quiet
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000100-0x000000000009cbff] usable
BIOS-e820: [mem 0x000000000009cc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cf54ffff] usable
BIOS-e820: [mem 0x00000000cf550000-0x00000000cf55dfff] ACPI data
BIOS-e820: [mem 0x00000000cf55e000-0x00000000cf5dffff] ACPI NVS
BIOS-e820: [mem 0x00000000cf5e0000-0x00000000cf5fffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022bffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: System manufacturer P5E-VM DO/P5E-VM DO, BIOS 0902 02/17/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x22c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0D0000000 mask FF0000000 uncachable
1 base 0E0000000 mask FE0000000 uncachable
2 base 000000000 mask E00000000 write-back
3 base 200000000 mask FE0000000 write-back
4 base 220000000 mask FF8000000 write-back
5 base 228000000 mask FFC000000 write-back
6 base 0CF600000 mask FFFE00000 uncachable
7 disabled
x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
e820: update [mem 0xcf600000-0xcf7fffff] usable ==> reserved
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf550 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Base memory trampoline at [ffff880000096000] 96000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01af3000, 0x01af3fff] PGTABLE
BRK [0x01af4000, 0x01af4fff] PGTABLE
BRK [0x01af5000, 0x01af5fff] PGTABLE
init_memory_mapping: [mem 0x22be00000-0x22bffffff]
[mem 0x22be00000-0x22bffffff] page 2M
BRK [0x01af6000, 0x01af6fff] PGTABLE
init_memory_mapping: [mem 0x228000000-0x22bdfffff]
[mem 0x228000000-0x22bdfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x227ffffff]
[mem 0x200000000-0x227ffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcf54ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xcf3fffff] page 2M
[mem 0xcf400000-0xcf54ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
BRK [0x01af7000, 0x01af7fff] PGTABLE
BRK [0x01af8000, 0x01af8fff] PGTABLE
RAMDISK: [mem 0x7f962000-0x7fff3fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F9A80 000014 (v00 ACPIAM)
ACPI: RSDT 0x00000000CF550000 000048 (v01 A_M_I_ OEMRSDT 02000917 MSFT 00000097)
ACPI: FACP 0x00000000CF550200 000084 (v02 A_M_I_ OEMFACP 02000917 MSFT 00000097)
ACPI: DSDT 0x00000000CF5505C0 00843B (v01 A0869 A0869001 00000001 INTL 20060113)
ACPI: FACS 0x00000000CF55E000 000040
ACPI: APIC 0x00000000CF550390 00006C (v01 A_M_I_ OEMAPIC 02000917 MSFT 00000097)
ACPI: MCFG 0x00000000CF550400 00003C (v01 A_M_I_ OEMMCFG 02000917 MSFT 00000097)
ACPI: OEMB 0x00000000CF55E040 000081 (v01 A_M_I_ AMI_OEM 02000917 MSFT 00000097)
ACPI: HPET 0x00000000CF558A00 000038 (v01 A_M_I_ OEMHPET 02000917 MSFT 00000097)
ACPI: ASF! 0x00000000CF558A38 000099 (v32 LEGEND I865PASF 00000001 INTL 20060113)
ACPI: GSCI 0x00000000CF55E0D0 002024 (v01 A_M_I_ GMCHSCI 02000917 MSFT 00000097)
ACPI: iEIT 0x00000000CF560100 0000B0 (v01 A_M_I_ EITTABLE 02000917 MSFT 00000097)
ACPI: DMAR 0x00000000CF5601B0 000150 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022bffffff]
Initmem setup node 0 [mem 0x00000000-0x22bffffff]
NODE_DATA [mem 0x22bff5000-0x22bff9fff]
[ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880223600000-ffff88022a7fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x22bffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009bfff]
node 0: [mem 0x00100000-0xcf54ffff]
node 0: [mem 0x100000000-0x22bffffff]
On node 0 totalpages: 2077931
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 11555 pages used for memmap
DMA32 zone: 845136 pages, LIFO batch:31
Normal zone: 16800 pages used for memmap
Normal zone: 1228800 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xcf800000-0xcfffffff
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
PM: Registered nosave memory: [mem 0xcf550000-0xcf55dfff]
PM: Registered nosave memory: [mem 0xcf55e000-0xcf5dffff]
PM: Registered nosave memory: [mem 0xcf5e0000-0xcf5fffff]
PM: Registered nosave memory: [mem 0xcf600000-0xcf7fffff]
PM: Registered nosave memory: [mem 0xcf800000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88022bc00000 s80832 r8192 d21568 u524288
pcpu-alloc: s80832 r8192 d21568 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2049499
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.14-0.bpo.1-amd64 root=/dev/mapper/sysvg-root ro quiet quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8110164K/8311724K available (5440K kernel code, 940K rwdata, 1832K rodata, 1204K init, 840K bss, 201560K reserved)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:712 16
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2400.096 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.19 BogoMIPS (lpj=9600384)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal LVT vector (0xfa) already installed
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
ftrace: allocating 21610 entries in 85 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed91000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed91000 ver 1:0 cap c0000020230270 ecap 1000
dmar: DRHD base: 0x000000fed92000 flags: 0x0
dmar: IOMMU 1: reg_base_addr fed92000 ver 1:0 cap c0000020230270 ecap 1000
dmar: DRHD base: 0x000000fed93000 flags: 0x1
dmar: IOMMU 2: reg_base_addr fed93000 ver 1:0 cap c9008020230270 ecap 1000
dmar: RMRR base: 0x000000000ed000 end: 0x000000000effff
dmar: RMRR base: 0x000000cf600000 end: 0x000000cfffffff
dmar: RMRR base: 0x000000cf5e0000 end: 0x000000cf5effff
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz (fam: 06, model: 0f, stepping: 07)
Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
CPU1: Thermal LVT vector (0xfa) already installed
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
CPU2: Thermal LVT vector (0xfa) already installed
#3[ 0.004000] CPU3: Thermal LVT vector (0xfa) already installed
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19200.76 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xcf55e000-0xcf5dffff] (532480 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xcf600000-0xffffffff]
pci 0000:00:00.0: [8086:29b0] type 00 class 0x060000
pci 0000:00:02.0: [8086:29b2] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xfe980000-0xfe9fffff]
pci 0000:00:02.0: reg 0x14: [io 0xcc00-0xcc07]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:02.0: reg 0x1c: [mem 0xfe800000-0xfe8fffff]
pci 0000:00:03.0: [8086:29b4] type 00 class 0x078000
pci 0000:00:03.0: reg 0x10: [mem 0xfe97ac00-0xfe97ac0f 64bit]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: [8086:29b6] type 00 class 0x010185
pci 0000:00:03.2: reg 0x10: [io 0xc800-0xc807]
pci 0000:00:03.2: reg 0x14: [io 0xc480-0xc483]
pci 0000:00:03.2: reg 0x18: [io 0xc400-0xc407]
pci 0000:00:03.2: reg 0x1c: [io 0xc080-0xc083]
pci 0000:00:03.2: reg 0x20: [io 0xc000-0xc00f]
pci 0000:00:03.3: [8086:29b7] type 00 class 0x070002
pci 0000:00:03.3: reg 0x10: [io 0xc880-0xc887]
pci 0000:00:03.3: reg 0x14: [mem 0xfe97b000-0xfe97bfff]
pci 0000:00:19.0: [8086:10bd] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfe940000-0xfe95ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfe979000-0xfe979fff]
pci 0000:00:19.0: reg 0x18: [io 0xbc00-0xbc1f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xb480-0xb49f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xb800-0xb81f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xb880-0xb89f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfe97a800-0xfe97abff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xb000-0xb01f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xb080-0xb09f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xb400-0xb41f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfe97a400-0xfe97a7ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2914] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 0003)
pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xa880-0xa887]
pci 0000:00:1f.2: reg 0x14: [io 0xa800-0xa803]
pci 0000:00:1f.2: reg 0x18: [io 0xa480-0xa487]
pci 0000:00:1f.2: reg 0x1c: [io 0xa400-0xa403]
pci 0000:00:1f.2: reg 0x20: [io 0xa080-0xa09f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfe978800-0xfe978fff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfe97a000-0xfe97a0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
pci 0000:00:1f.6: [8086:2932] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:01:00.0: [197b:2368] type 00 class 0x010185
pci 0000:01:00.0: reg 0x10: [io 0xdc00-0xdc07]
pci 0000:01:00.0: reg 0x14: [io 0xd880-0xd883]
pci 0000:01:00.0: reg 0x18: [io 0xd800-0xd807]
pci 0000:01:00.0: reg 0x1c: [io 0xd480-0xd483]
pci 0000:01:00.0: reg 0x20: [io 0xd400-0xd40f]
pci 0000:01:00.0: reg 0x30: [mem 0xfeaf0000-0xfeafffff pref]
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 01]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.4: bridge window [mem 0xcf600000-0xcf7fffff 64bit pref]
pci 0000:03:01.0: [8086:107c] type 00 class 0x020000
pci 0000:03:01.0: reg 0x10: [mem 0xfebe0000-0xfebfffff]
pci 0000:03:01.0: reg 0x14: [mem 0xfebc0000-0xfebdffff]
pci 0000:03:01.0: reg 0x18: [io 0xec00-0xec3f]
pci 0000:03:01.0: reg 0x30: [mem 0xfeba0000-0xfebbffff pref]
pci 0000:03:01.0: PME# supported from D0 D3hot D3cold
pci 0000:03:02.0: [11c1:5811] type 00 class 0x0c0010
pci 0000:03:02.0: reg 0x10: [mem 0xfeb9f000-0xfeb9ffff]
pci 0000:03:02.0: supports D1 D2
pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xcf600000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15), disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15), disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 11 12 14 15), disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15), disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15), disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 *14 15), disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15), disabled.
ACPI: Enabled 4 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009cc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcf550000-0xcfffffff]
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0290-0x0297] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x0800-0x087f] could not be reserved
system 00:03: [io 0x0480-0x04bf] has been reserved
system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:03: [mem 0xfed50000-0xfed8ffff] has been reserved
system 00:03: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:03: [mem 0xff800000-0xffbfffff] has been reserved
system 00:03: [mem 0xffe80000-0xffefffff] has been reserved
system 00:03: [mem 0xffc00000-0xffffffff] could not be reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: [mem 0x00100000-0xcf5fffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 01]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.4: bridge window [mem 0xcf600000-0xcf7fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcf600000-0xffffffff]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf03fffff]
pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xcf600000-0xcf7fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xcf600000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 6728K (ffff88007f962000 - ffff88007fff4000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcb550000-0xcf550000] (64MB) mapped at [ffff8800cb550000-ffff8800cf54ffff]
microcode: CPU0 sig=0x6f7, pf=0x10, revision=0x68
microcode: CPU1 sig=0x6f7, pf=0x10, revision=0x68
microcode: CPU2 sig=0x6f7, pf=0x10, revision=0x68
microcode: CPU3 sig=0x6f7, pf=0x10, revision=0x68
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1430023884.280:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15853
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
GHES: HEST is not enabled!
0000:00:03.3: ttyS0 at I/O 0xc880 (irq = 17, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Q35 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:01: setting system clock to 2015-04-26 04:51:25 UTC (1430023885)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 692K (ffff880001553000 - ffff880001600000)
Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
systemd-udevd[71]: starting version 204
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfe978800 port 0xfe978900 irq 42
ata2: SATA max UDMA/133 abar m2048@0xfe978800 port 0xfe978980 irq 42
ata3: SATA max UDMA/133 abar m2048@0xfe978800 port 0xfe978a00 irq 42
ata4: SATA max UDMA/133 abar m2048@0xfe978800 port 0xfe978a80 irq 42
ata5: SATA max UDMA/133 abar m2048@0xfe978800 port 0xfe978b00 irq 42
ata6: SATA max UDMA/133 abar m2048@0xfe978800 port 0xfe978b80 irq 42
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-9: ST2000DM001-1CH164, CC27, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC27 PQ: 0 ANSI: 5
tsc: Refined TSC clocksource calibration: 2400.084 MHz
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-9: ST2000DM001-1CH164, CC27, max UDMA/133
ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC27 PQ: 0 ANSI: 5
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-9: ST2000DM001-1CH164, CC27, max UDMA/133
ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC27 PQ: 0 ANSI: 5
Switched to clocksource tsc
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-9: ST2000DM001-1CH164, CC27, max UDMA/133
ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC27 PQ: 0 ANSI: 5
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-9: ST2000DM001-1CH164, CC27, max UDMA/133
ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC27 PQ: 0 ANSI: 5
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-9: ST2000DM001-1CH164, CC27, max UDMA/133
ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC27 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdd] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 4:0:0:0: [sde] 4096-byte physical blocks
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 5:0:0:0: [sdf] 4096-byte physical blocks
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde:
sd 4:0:0:0: [sde] Attached SCSI disk
sdf:
sd 5:0:0:0: [sdf] Attached SCSI disk
sda:
sd 0:0:0:0: [sda] Attached SCSI disk
sdd:
sd 3:0:0:0: [sdd] Attached SCSI disk
sdc: unknown partition table
sd 2:0:0:0: [sdc] Attached SCSI disk
sdb: unknown partition table
sd 1:0:0:0: [sdb] Attached SCSI disk
md: raid1 personality registered for level 1
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
md: md126 stopped.
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: raid10 personality registered for level 10
md/raid10:md126: active with 6 out of 6 devices
md126: detected capacity change from 0 to 4000529383424
md126: unknown partition table
random: lvm urandom read with 122 bits of entropy available
random: nonblocking pool is initialized
XFS (dm-0): Mounting V4 Filesystem
XFS (dm-0): Ending clean mount
systemd-udevd[322]: starting version 204
mei_me 0000:00:03.0: irq 43 for MSI/MSI-X
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ACPI: Power Button [PWRB]
ehci-pci 0000:00:1a.7: debug port 1
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe97a800
uhci_hcd: USB Universal Host Controller Interface driver
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe97a400
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b480
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b800
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000b880
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b080
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
scsi6 : ata_generic
scsi7 : ata_generic
ata7: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 18
ata8: PATA max UDMA/100 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 18
scsi8 : pata_jmicron
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 5:0:0:0: Attached scsi generic sg5 type 0
[drm] Initialized drm 1.1.0 20060810
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
ata9.01: ATA-6: ST3120026A, 3.06, max UDMA/100
ata9.01: 234441648 sectors, multi 0: LBA48
ata9.01: configured for UDMA/100
scsi 8:0:1:0: Direct-Access ATA ST3120026A 3.06 PQ: 0 ANSI: 5
sd 8:0:1:0: [sdg] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 8:0:1:0: [sdg] Write Protect is off
sd 8:0:1:0: [sdg] Mode Sense: 00 3a 00 00
sd 8:0:1:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:1:0: Attached scsi generic sg6 type 0
sdg: sdg1 sdg2 < sdg5 sdg6 sdg7 sdg8 sdg9 >
sd 8:0:1:0: [sdg] Attached SCSI disk
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:23:54:6d:85:59
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 6, PBA No: FFFFFF-0FF
ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041f conflicts with OpRegion 0x0000000000000400-0x000000000000040f (\SMRG) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
input: PC Speaker as /devices/platform/pcspkr/input/input3
[drm] Memory usable by graphics device = 512M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 45 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initialized overlay support
i915 0000:00:02.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
e1000 0000:03:01.0 eth1: (PCI:33MHz:32-bit) 00:0e:0c:da:6c:41
e1000 0000:03:01.0 eth1: Intel(R) PRO/1000 Network Connection
i915: No ACPI video bus found
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
firewire_ohci 0000:03:02.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
ppdev: user-space parallel port driver
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a ICH9DO TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
systemd-udevd[339]: renamed network interface eth1 to eth2
systemd-udevd[338]: renamed network interface eth0 to eth3
usb 3-2: new low-speed USB device number 2 using uhci_hcd
firewire_core 0000:03:02.0: created device fw0: GUID 001e8c0001a39c8d, S400
usb 3-2: New USB device found, idVendor=0463, idProduct=ffff
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
usb 3-2: Product: Protection Station
usb 3-2: Manufacturer: EATON
usb 3-2: SerialNumber: AN2E49008
hidraw: raw HID events driver (C) Jiri Kosina
floppy0: no floppy controllers found
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hid-generic 0003:0463:FFFF.0001: hiddev0,hidraw0: USB HID v10.10 Device [EATON Protection Station] on usb-0000:00:1a.0-2/input0
loop: module loaded
vga16fb: initializing
vga16fb: mapped to 0xffff8800000a0000
fb1: VGA16 VGA frame buffer device
w83627ehf: Found W83627DHG chip at 0x290
ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_SB_.PCI0.SBRG.SIOR.HWRE) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
IPVS: Creating netns size=2048 id=0
IPVS: ipvs loaded.
IPVS: [dh] scheduler registered.
IPVS: ftp: loaded support on port[0] = 21
IPVS: [lblc] scheduler registered.
IPVS: [lblcr] scheduler registered.
IPVS: [lc] scheduler registered.
IPVS: [nq] scheduler registered.
IPVS: [rr] scheduler registered.
IPVS: [sed] scheduler registered.
IPVS: [sh] scheduler registered.
IPVS: [wlc] scheduler registered.
IPVS: [wrr] scheduler registered.
w83627ehf: Found W83627DHG chip at 0x290
ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_SB_.PCI0.SBRG.SIOR.HWRE) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Adding 1048572k swap on /dev/mapper/sysvg-swap. Priority:-1 extents:1 across:1048572k FS
EXT4-fs (sdg1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sdg1): warning: checktime reached, running e2fsck is recommended
EXT4-fs (sdg1): mounted filesystem with ordered data mode. Opts: (null)
XFS (dm-18): Mounting V4 Filesystem
XFS (dm-18): Ending clean mount
XFS (dm-5): Mounting V4 Filesystem
XFS (dm-5): Ending clean mount
XFS (dm-16): Mounting V4 Filesystem
XFS (dm-16): Ending clean mount
XFS (dm-1): Mounting V4 Filesystem
XFS (dm-1): Ending clean mount
XFS (dm-3): Mounting V4 Filesystem
XFS (dm-3): Ending clean mount
XFS (dm-6): Mounting V4 Filesystem
XFS (dm-6): Ending clean mount
XFS (dm-2): Mounting V4 Filesystem
XFS (dm-2): Ending clean mount
XFS (dm-20): Mounting V4 Filesystem
XFS (dm-20): Ending clean mount
XFS (dm-11): Mounting V4 Filesystem
XFS (dm-11): Ending clean mount
XFS (dm-21): Mounting V4 Filesystem
XFS (dm-21): Ending clean mount
XFS (dm-12): Mounting V4 Filesystem
XFS (dm-12): Ending clean mount
XFS (dm-13): Mounting V4 Filesystem
XFS (dm-13): Ending clean mount
XFS (dm-4): Mounting V4 Filesystem
XFS (dm-4): Ending clean mount
XFS (dm-27): Mounting V4 Filesystem
XFS (dm-27): Ending clean mount
Bridge firewalling registered
device eth2 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
br0: port 1(eth2) entered listening state
br0: port 1(eth2) entered listening state
br0: port 1(eth2) entered learning state
br0: topology change detected, propagating
br0: port 1(eth2) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
e1000e: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
ip_tables: (C) 2000-2006 Netfilter Core Team
e1000e 0000:00:19.0 eth3: changing MTU from 1500 to 1454
HTB: quantum of class 10002 is big. Consider r2q change.
HTB: quantum of class 10030 is big. Consider r2q change.
u32 classifier
Performance counters on
input device check on
Actions configured
systemd-udevd[2934]: starting version 204
e1000e: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff818b87c0)
floppy0: no floppy controllers found
work still pending
IPVS: Creating netns size=2048 id=1
IPVS: ftp: loaded support on port[0] = 21
floppy0: no floppy controllers found
device-mapper: thin: Data device (dm-8) discard unsupported: Disabling discard passdown.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entered listening state
br0: port 2(vnet0) entered listening state
qemu-system-x86: sending ioctl 5326 to a partition!
qemu-system-x86: sending ioctl 80200204 to a partition!
br0: port 2(vnet0) entered learning state
device vnet1 entered promiscuous mode
br0: port 3(vnet1) entered listening state
br0: port 3(vnet1) entered listening state
qemu-system-x86: sending ioctl 5326 to a partition!
qemu-system-x86: sending ioctl 80200204 to a partition!
qemu-system-x86: sending ioctl 5326 to a partition!
qemu-system-x86: sending ioctl 80200204 to a partition!
device vnet2 entered promiscuous mode
br0: port 4(vnet2) entered listening state
br0: port 4(vnet2) entered listening state
kvm: zapping shadow pages for mmio generation wraparound
qemu-system-x86: sending ioctl 5326 to a partition!
qemu-system-x86: sending ioctl 80200204 to a partition!
kvm: zapping shadow pages for mmio generation wraparound
br0: topology change detected, propagating
br0: port 2(vnet0) entered forwarding state
br0: port 3(vnet1) entered learning state
br0: port 4(vnet2) entered learning state
kvm: zapping shadow pages for mmio generation wraparound
br0: topology change detected, propagating
br0: port 3(vnet1) entered forwarding state
br0: topology change detected, propagating
br0: port 4(vnet2) entered forwarding state
kvm [6022]: vcpu0 unhandled rdmsr: 0x345
kvm [6022]: vcpu0 unhandled wrmsr: 0x40 data 0
kvm [6022]: vcpu0 unhandled wrmsr: 0x60 data 0
kvm [6022]: vcpu0 unhandled wrmsr: 0x41 data 0
kvm [6022]: vcpu0 unhandled wrmsr: 0x61 data 0
kvm [6022]: vcpu0 unhandled wrmsr: 0x42 data 0
kvm [6022]: vcpu0 unhandled wrmsr: 0x62 data 0
kvm [6022]: vcpu0 unhandled wrmsr: 0x43 data 0
kvm [6022]: vcpu0 unhandled wrmsr: 0x63 data 0
kvm [6022]: vcpu1 unhandled wrmsr: 0x40 data 0
kvm [6022]: vcpu1 unhandled wrmsr: 0x60 data 0
kvm_set_msr_common: 6 callbacks suppressed
kvm [5930]: vcpu0 unhandled wrmsr: 0x40 data 0
kvm [5930]: vcpu0 unhandled wrmsr: 0x41 data 0
kvm [5930]: vcpu0 unhandled wrmsr: 0x42 data 0
kvm [5930]: vcpu0 unhandled wrmsr: 0x43 data 0
kvm [6052]: vcpu0 unhandled wrmsr: 0x40 data 0
kvm [6052]: vcpu0 unhandled wrmsr: 0x41 data 0
kvm [6052]: vcpu0 unhandled wrmsr: 0x42 data 0
kvm [6052]: vcpu0 unhandled wrmsr: 0x43 data 0
device-mapper: thin: Data device (dm-10) discard unsupported: Disabling discard passdown.
device-mapper: thin: Data device (dm-15) discard unsupported: Disabling discard passdown.
XFS (dm-36): Mounting V4 Filesystem
XFS (dm-36): Ending clean mount
XFS (dm-37): Mounting V4 Filesystem
XFS (dm-37): Ending clean mount
XFS (dm-38): Mounting V4 Filesystem
XFS (dm-38): Ending clean mount
HTB: quantum of class 10002 is big. Consider r2q change.
HTB: quantum of class 10030 is big. Consider r2q change.
br0: port 4(vnet2) entered disabled state
device vnet2 left promiscuous mode
br0: port 4(vnet2) entered disabled state
br0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entered disabled state
br0: port 3(vnet1) entered disabled state
device vnet1 left promiscuous mode
br0: port 3(vnet1) entered disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entered listening state
br0: port 2(vnet0) entered listening state
qemu-system-x86: sending ioctl 5326 to a partition!
qemu-system-x86: sending ioctl 80200204 to a partition!
qemu-system-x86: sending ioctl 5326 to a partition!
qemu-system-x86: sending ioctl 80200204 to a partition!
br0: port 2(vnet0) entered learning state
kvm: zapping shadow pages for mmio generation wraparound
br0: topology change detected, propagating
br0: port 2(vnet0) entered forwarding state
kvm [9878]: vcpu0 unhandled rdmsr: 0x345
kvm [9878]: vcpu0 unhandled wrmsr: 0x40 data 0
kvm [9878]: vcpu0 unhandled wrmsr: 0x60 data 0
kvm [9878]: vcpu0 unhandled wrmsr: 0x41 data 0
kvm [9878]: vcpu0 unhandled wrmsr: 0x61 data 0
kvm [9878]: vcpu0 unhandled wrmsr: 0x42 data 0
kvm [9878]: vcpu0 unhandled wrmsr: 0x62 data 0
kvm [9878]: vcpu0 unhandled wrmsr: 0x43 data 0
kvm [9878]: vcpu0 unhandled wrmsr: 0x63 data 0
kvm [9878]: vcpu1 unhandled wrmsr: 0x40 data 0
kvm [9878]: vcpu1 unhandled wrmsr: 0x60 data 0
device vnet1 entered promiscuous mode
br0: port 3(vnet1) entered listening state
br0: port 3(vnet1) entered listening state
qemu-system-x86: sending ioctl 5326 to a partition!
qemu-system-x86: sending ioctl 80200204 to a partition!
kvm: zapping shadow pages for mmio generation wraparound
br0: port 3(vnet1) entered learning state
br0: topology change detected, propagating
br0: port 3(vnet1) entered forwarding state
kvm_set_msr_common: 6 callbacks suppressed
kvm [9919]: vcpu0 unhandled wrmsr: 0x40 data 0
kvm [9919]: vcpu0 unhandled wrmsr: 0x41 data 0
kvm [9919]: vcpu0 unhandled wrmsr: 0x42 data 0
kvm [9919]: vcpu0 unhandled wrmsr: 0x43 data 0
device vnet2 entered promiscuous mode
br0: port 4(vnet2) entered listening state
br0: port 4(vnet2) entered listening state
qemu-system-x86: sending ioctl 5326 to a partition!
qemu-system-x86: sending ioctl 80200204 to a partition!
kvm: zapping shadow pages for mmio generation wraparound
br0: port 4(vnet2) entered learning state
br0: topology change detected, propagating
br0: port 4(vnet2) entered forwarding state
kvm [9946]: vcpu0 unhandled wrmsr: 0x40 data 0
kvm [9946]: vcpu0 unhandled wrmsr: 0x41 data 0
kvm [9946]: vcpu0 unhandled wrmsr: 0x42 data 0
kvm [9946]: vcpu0 unhandled wrmsr: 0x43 data 0
systemd-udevd[13022]: starting version 204
perf interrupt took too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
Key type dns_resolver registered
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -110
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -75
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -110
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.30 [Flags: R/W MODULE].
QNX4 filesystem 0.2.3 registered.
raid6: sse2x1 3970 MB/s
raid6: sse2x2 4475 MB/s
raid6: sse2x4 7098 MB/s
raid6: using algorithm sse2x4 (7098 MB/s)
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 9329.000 MB/sec
generic_sse: 8300.000 MB/sec
xor: using function: prefetch64-sse (9329.000 MB/sec)
Btrfs loaded
fuse init (API version 7.23)
EXT4-fs (sdg5): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdg5): INFO: recovery required on readonly filesystem
EXT4-fs (sdg5): write access unavailable, cannot proceed
XFS (sdg6): Mounting V4 Filesystem
XFS (sdg6): Ending clean mount
XFS (sdg8): Mounting V4 Filesystem
XFS (sdg8): recovery required on read-only device.
XFS (sdg8): write access unavailable, cannot proceed.
XFS (sdg8): log mount/recovery failed: error 30
XFS (sdg8): log mount failed
XFS (sdg9): Mounting V4 Filesystem
XFS (sdg9): Ending clean mount
XFS (dm-22): Mounting V4 Filesystem
XFS (dm-22): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-29): Mounting V4 Filesystem
XFS (dm-29): Ending clean mount
EXT4-fs (sdg5): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdg5): INFO: recovery required on readonly filesystem
EXT4-fs (sdg5): write access unavailable, cannot proceed
XFS (sdg6): Mounting V4 Filesystem
XFS (sdg6): Ending clean mount
XFS (sdg8): Mounting V4 Filesystem
XFS (sdg8): recovery required on read-only device.
XFS (sdg8): write access unavailable, cannot proceed.
XFS (sdg8): log mount/recovery failed: error 30
XFS (sdg8): log mount failed
XFS (sdg9): Mounting V4 Filesystem
XFS (sdg9): Ending clean mount
XFS (dm-22): Mounting V4 Filesystem
XFS (dm-22): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-29): Mounting V4 Filesystem
XFS (dm-29): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -110
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -75
md: data-check of RAID array md126
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
md: using 128k window, over a total of 3906766976k.
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -110
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -75
md: md126: data-check done.
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -110
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -110
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -75
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -110
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -75
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb usb3-port2: disabled by hub (EMI?), re-enabling...
usb 3-2: USB disconnect, device number 2
usb 3-2: new low-speed USB device number 3 using uhci_hcd
usb 3-2: new low-speed USB device number 4 using uhci_hcd
usb 3-2: New USB device found, idVendor=0463, idProduct=ffff
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
usb 3-2: Product: Protection Station
usb 3-2: Manufacturer: EATON
usb 3-2: SerialNumber: AN2E49008
hid-generic 0003:0463:FFFF.0002: hiddev0,hidraw0: USB HID v10.10 Device [EATON Protection Station] on usb-0000:00:1a.0-2/input0
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
hrtimer: interrupt took 8021 ns
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
nf_conntrack: falling back to vmalloc.
IPVS: Creating netns size=2048 id=2
nf_conntrack: falling back to vmalloc.
IPVS: ftp: loaded support on port[0] = 21
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-39): Mounting V4 Filesystem
XFS (dm-39): Ending clean mount
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -110
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -75
e1000e: eth3 NIC Link is Down
e1000: eth2 NIC Link is Down
br0: port 1(eth2) entered disabled state
e1000e: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
br0: port 1(eth2) entered listening state
br0: port 1(eth2) entered listening state
br0: port 1(eth2) entered learning state
br0: topology change detected, propagating
br0: port 1(eth2) entered forwarding state
e1000e: eth3 NIC Link is Down
e1000: eth2 NIC Link is Down
br0: port 1(eth2) entered disabled state
e1000e: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
br0: port 1(eth2) entered listening state
br0: port 1(eth2) entered listening state
br0: port 1(eth2) entered learning state
br0: topology change detected, propagating
br0: port 1(eth2) entered forwarding state
e1000e: eth3 NIC Link is Down
e1000: eth2 NIC Link is Down
br0: port 1(eth2) entered disabled state
e1000e: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
br0: port 1(eth2) entered listening state
br0: port 1(eth2) entered listening state
br0: port 1(eth2) entered learning state
br0: topology change detected, propagating
br0: port 1(eth2) entered forwarding state
e1000e: eth3 NIC Link is Down
e1000: eth2 NIC Link is Down
br0: port 1(eth2) entered disabled state
e1000e: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
br0: port 1(eth2) entered listening state
br0: port 1(eth2) entered listening state
br0: port 1(eth2) entered learning state
br0: topology change detected, propagating
br0: port 1(eth2) entered forwarding state
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
device vnet3 entered promiscuous mode
virbr0: port 2(vnet3) entered listening state
virbr0: port 2(vnet3) entered listening state
virbr0: port 2(vnet3) entered learning state
virbr0: topology change detected, propagating
virbr0: port 2(vnet3) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): virbr0: link becomes ready
device virbr0-nic left promiscuous mode
virbr0: port 1(virbr0-nic) entered disabled state
virbr0: port 2(vnet3) entered disabled state
device vnet3 left promiscuous mode
virbr0: port 2(vnet3) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic left promiscuous mode
virbr0: port 1(virbr0-nic) entered disabled state
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
TCP: TCP: Possible SYN flooding on port 80. Sending cookies. Check SNMP counters.
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -110
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -75
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -84
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 2 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 2 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
usb 3-2: USB disconnect, device number 4
usb 3-2: new low-speed USB device number 5 using uhci_hcd
usb 3-2: New USB device found, idVendor=0463, idProduct=ffff
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
usb 3-2: Product: Protection Station
usb 3-2: Manufacturer: EATON
usb 3-2: SerialNumber: AN2E49008
hid-generic 0003:0463:FFFF.0003: hiddev0,hidraw0: USB HID v10.10 Device [EATON Protection Station] on usb-0000:00:1a.0-2/input0
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
JFS: nTxBlock = 8192, nTxLock = 65536
fuse exit
Key type id_resolver unregistered
Key type id_legacy unregistered
Key type dns_resolver unregistered
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
Key type dns_resolver registered
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount
XFS (dm-40): Mounting V4 Filesystem
XFS (dm-40): Ending clean mount
XFS (dm-40): Mounting V4 Filesystem
XFS (dm-40): Ending clean mount
XFS (dm-40): Mounting V4 Filesystem
XFS (dm-40): Ending clean mount
usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -110
XFS (dm-19): Mounting V4 Filesystem
XFS (dm-19): Ending clean mount