dmesg - fio_8GMLC
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-46-generic (buildd@tipua) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #77-Ubuntu SMP Mon Mar 2 18:23:39 UTC 2015 (Ubuntu 3.13.0-46.77-generic 3.13.11-ckt15)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dd7a173f] usable
BIOS-e820: [mem 0x00000000dd7a1740-0x00000000dd7a379f] ACPI NVS
BIOS-e820: [mem 0x00000000dd7a37a0-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011bffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Hewlett-Packard HP Compaq 6000 Pro MT PC/3048h, BIOS 786G2 v01.09 08/25/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x11c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E3FFF write-protect
E4000-EFFFF write-back
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 0DD800000 mask FFF800000 uncachable
2 base 0DE000000 mask FFE000000 uncachable
3 base 0E0000000 mask FE0000000 uncachable
4 disabled
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 3544MB, range: 8MB, type UC
reg 2, base: 3552MB, range: 32MB, type UC
reg 3, base: 3584MB, range: 512MB, type UC
total RAM covered: 7640M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 1G num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3544MB, range: 8MB, type UC
reg 2, base: 3552MB, range: 32MB, type UC
reg 3, base: 3584MB, range: 512MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
e820: update [mem 0xdd800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdd7a1 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f9bf0-0x000f9bff] mapped at [ffff8800000f9bf0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0x11be00000-0x11bffffff]
[mem 0x11be00000-0x11bffffff] page 2M
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x118000000-0x11bdfffff]
[mem 0x118000000-0x11bdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x117ffffff]
[mem 0x100000000-0x117ffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdd7a0fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xdd5fffff] page 2M
[mem 0xdd600000-0xdd7a0fff] page 4k
RAMDISK: [mem 0x35b48000-0x36d9bfff]
ACPI: RSDP 00000000000e5810 000014 (v00 COMPAQ)
ACPI: RSDT 00000000dd7c5840 000040 (v01 HPQOEM SLIC-BPC 20090825 00000000)
ACPI: FACP 00000000dd7c58e8 000074 (v01 COMPAQ EAGLLAKE 00000001 00000000)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000050/0x0 (20131115/tbfadt-603)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20131115/tbfadt-653)
ACPI: DSDT 00000000dd7c5c5f 009F6C (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
ACPI: FACS 00000000dd7c5800 000040
ACPI: APIC 00000000dd7c595c 000084 (v01 COMPAQ EAGLLAKE 00000001 00000000)
ACPI: ASF! 00000000dd7c59e0 000063 (v32 COMPAQ EAGLLAKE 00000001 00000000)
ACPI: MCFG 00000000dd7c5a43 00003C (v01 COMPAQ EAGLLAKE 00000001 00000000)
ACPI: TCPA 00000000dd7c5a7f 000032 (v01 COMPAQ EAGLLAKE 00000001 00000000)
ACPI: SLIC 00000000dd7c5ab1 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
ACPI: HPET 00000000dd7c5c27 000038 (v01 COMPAQ EAGLLAKE 00000001 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011bffffff]
Initmem setup node 0 [mem 0x00000000-0x11bffffff]
NODE_DATA [mem 0x11bff7000-0x11bffbfff]
[ffffea0000000000-ffffea00047fffff] PMD -> [ffff880117600000-ffff88011b5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x11bffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xdd7a0fff]
node 0: [mem 0x100000000-0x11bffffff]
On node 0 totalpages: 1021759
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 14111 pages used for memmap
DMA32 zone: 903073 pages, LIFO batch:31
Normal zone: 1792 pages used for memmap
Normal zone: 114688 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
PM: Registered nosave memory: [mem 0xdd7a1000-0xdd7a1fff]
PM: Registered nosave memory: [mem 0xdd7a2000-0xdd7a2fff]
PM: Registered nosave memory: [mem 0xdd7a3000-0xdd7a3fff]
PM: Registered nosave memory: [mem 0xdd7a4000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xffffffff]
e820: [mem 0xe0000000-0xf3ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88011bc00000 s82368 r8192 d24128 u524288
pcpu-alloc: s82368 r8192 d24128 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1005771
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3919580K/4087036K available (7384K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 167456K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:712 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3158.887 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6317.77 BogoMIPS (lpj=12635548)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28563 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz (fam: 06, model: 17, stepping: 0a)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (12635.54 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdd7a1740-0xdd7a379f] (8288 bytes)
reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 17:06:07, date: 05/08/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: SSDT 00000000dd7d1127 0003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
ACPI: SSDT 00000000dd7d0e77 0002B0 (v01 COMPAQ CST 00000001 MSFT 0100000E)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0002B0 (v01 COMPAQ CST 00000001 MSFT 0100000E)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
acpi LNXCPU:00: Invalid PBLK length [7]
acpi LNXCPU:01: Invalid PBLK length [7]
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20131115/nsarguments-189)
ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dsfield-211)
ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880115a65de8), AE_ALREADY_EXISTS (20131115/psparse-536)
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x1000-0x2fff]
pci_bus 0000:00: root bus resource [io 0x3000-0x6fff]
pci_bus 0000:00: root bus resource [io 0x7000-0xafff]
pci_bus 0000:00: root bus resource [io 0xb000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf3ffffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x1230-0x1237]
pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0xf0400000-0xf04fffff 64bit]
pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000
pci 0000:00:03.0: reg 0x10: [mem 0xf0527100-0xf052710f 64bit]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185
pci 0000:00:03.2: reg 0x10: [io 0x1238-0x123f]
pci 0000:00:03.2: reg 0x14: [io 0x1260-0x1263]
pci 0000:00:03.2: reg 0x18: [io 0x1240-0x1247]
pci 0000:00:03.2: reg 0x1c: [io 0x1264-0x1267]
pci 0000:00:03.2: reg 0x20: [io 0x1220-0x122f]
pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002
pci 0000:00:03.3: reg 0x10: [io 0x1248-0x124f]
pci 0000:00:03.3: reg 0x14: [mem 0xf0524000-0xf0524fff]
pci 0000:00:19.0: [8086:10de] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf0500000-0xf051ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf0525000-0xf0525fff]
pci 0000:00:19.0: reg 0x18: [io 0x1100-0x111f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x1120-0x113f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x1140-0x115f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0x1160-0x117f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf0526800-0xf0526bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf0520000-0xf0523fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:3a72] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x1180-0x119f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x11a0-0x11bf]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x11c0-0x11df]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf0526c00-0xf0526fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a1a] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3a02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x1250-0x1257]
pci 0000:00:1f.2: reg 0x14: [io 0x1268-0x126b]
pci 0000:00:1f.2: reg 0x18: [io 0x1258-0x125f]
pci 0000:00:1f.2: reg 0x1c: [io 0x126c-0x126f]
pci 0000:00:1f.2: reg 0x20: [io 0x11e0-0x11ff]
pci 0000:00:1f.2: reg 0x24: [mem 0xf0526000-0xf05267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1c.0: PCI bridge to [bus 20]
pci 0000:00:1c.1: PCI bridge to [bus 30]
pci 0000:00:1e.0: PCI bridge to [bus 10] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfebfffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x2fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x3000-0x6fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x7000-0xafff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xb000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf3ffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdd7a1740-0xdfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 8 timers in total, 4 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 40 for MSI
hpet: hpet3 irq 41 for MSI
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: [dma 3]
pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:09: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [io 0x04d0-0x04d1] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0d: [io 0x0400-0x041f] has been reserved
system 00:0d: [io 0x0420-0x043f] has been reserved
system 00:0d: [io 0x0440-0x045f] has been reserved
system 00:0d: [io 0x0460-0x047f] has been reserved
system 00:0d: [io 0x0800-0x087f] has been reserved
system 00:0d: [io 0x0880-0x08ff] has been reserved
system 00:0d: [io 0xf800-0xf81f] has been reserved
system 00:0d: [io 0xf820-0xf83f] has been reserved
system 00:0d: [io 0xf840-0xf85f] has been reserved
system 00:0d: [io 0xf860-0xf87f] has been reserved
system 00:0d: [io 0xfa00-0xfa3f] has been reserved
system 00:0d: [io 0xfc00-0xfc7f] has been reserved
system 00:0d: [io 0xfc80-0xfcff] has been reserved
system 00:0d: [io 0xfe00-0xfe7f] has been reserved
system 00:0d: [io 0xfe80-0xfeff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x00100000-0xdfffffff] could not be reserved
system 00:0e: [mem 0x000e4000-0x000fffff] could not be reserved
system 00:0e: [mem 0xfec01000-0xfecfffff] has been reserved
system 00:0e: [mem 0xfed00400-0xfed3ffff] has been reserved
system 00:0e: [mem 0xfed45000-0xffffffff] has been reserved
system 00:0e: [mem 0xf4000000-0xf7ffffff] has been reserved
system 00:0e: [mem 0x000ce600-0x000e3fff] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 15 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 20] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 20] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 20] add_size 200000
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 30] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 30] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 30] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
pci 0000:00:1c.1: BAR 14: assigned [mem 0xf8400000-0xf85fffff]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8600000-0xf87fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:1c.0: PCI bridge to [bus 20]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff]
pci 0000:00:1c.0: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 30]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xf8400000-0xf85fffff]
pci 0000:00:1c.1: bridge window [mem 0xf8600000-0xf87fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 10]
pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfebfffff]
pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x1000-0x2fff]
pci_bus 0000:00: resource 7 [io 0x3000-0x6fff]
pci_bus 0000:00: resource 8 [io 0x7000-0xafff]
pci_bus 0000:00: resource 9 [io 0xb000-0xffff]
pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 11 [mem 0xe0000000-0xf3ffffff]
pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:20: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:20: resource 1 [mem 0xf8000000-0xf81fffff]
pci_bus 0000:20: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
pci_bus 0000:30: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:30: resource 1 [mem 0xf8400000-0xf85fffff]
pci_bus 0000:30: resource 2 [mem 0xf8600000-0xf87fffff 64bit pref]
pci_bus 0000:10: resource 4 [mem 0xf8000000-0xfebfffff]
pci_bus 0000:10: resource 5 [io 0x0000-0x0cf7]
pci_bus 0000:10: resource 6 [io 0x1000-0x2fff]
pci_bus 0000:10: resource 7 [io 0x3000-0x6fff]
pci_bus 0000:10: resource 8 [io 0x7000-0xafff]
pci_bus 0000:10: resource 9 [io 0xb000-0xffff]
pci_bus 0000:10: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:10: resource 11 [mem 0xe0000000-0xf3ffffff]
pci_bus 0000:10: resource 12 [mem 0xfed40000-0xfed44fff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18768K (ffff880035b48000 - ffff880036d9c000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd97a1000-0xdd7a1000] (64MB) mapped at [ffff8800d97a1000-ffff8800dd7a0fff]
microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1431104767.420:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 7692
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 45 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004780000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
0000:00:03.3: ttyS4 at I/O 0x1248 (irq = 17, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
tpm_tis 00:09: 1.2 TPM (device-id 0xB, rev-id 16)
tpm_tis 00:09: TPM is disabled/deactivated (0x7)
brd: module loaded
loop: module loaded
scsi0 : ata_generic
scsi1 : ata_generic
ata1: PATA max UDMA/100 cmd 0x1238 ctl 0x1260 bmdma 0x1220 irq 18
ata2: PATA max UDMA/100 cmd 0x1240 ctl 0x1264 bmdma 0x1228 irq 18
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 22, io mem 0xf0526800
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-46-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 20, io mem 0xf0526c00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-46-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001120
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-46-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001140
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-46-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 22, io base 0x00001160
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-46-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001180
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.13.0-46-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 21, io base 0x000011a0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.13.0-46-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 22, io base 0x000011c0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.13.0-46-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: c2951ce2b9dbcf2b98197db08caea2d68b7acbe8'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
tpm_tis 00:09: A TPM error (7) occurred attempting to read a pcr value
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 15:461:137
block ram2: hash matches
serial 0000:00:03.3: hash matches
rtc_cmos 00:02: setting system clock to 2015-05-08 17:06:08 UTC (1431104768)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
systemd-udevd[106]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 64:31:50:3d:7c:9f
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: FFFFFF-0FF
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526100 irq 47
ata4: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526180 irq 47
ata5: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526200 irq 47
ata6: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526280 irq 47
ata7: DUMMY
ata8: DUMMY
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
ata4.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata4.00: ATAPI: hp DVD-RAM GH60L, RD01, max UDMA/100
ata3.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded
ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
ata3.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded
ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 >
sd 2:0:0:0: [sda] Attached SCSI disk
ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
ata4.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM hp DVD-RAM GH60L RD01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 57 bits of entropy available
init: plymouth-upstart-bridge main process (168) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (176) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (181) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (184) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (187) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (188) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (190) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (192) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 3-1: new low-speed USB device number 2 using uhci_hcd
Adding 4086780k swap on /dev/sda6. Priority:-1 extents:1 across:4086780k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 3-1: New USB device found, idVendor=046d, idProduct=c016
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Optical USB Mouse
usb 3-1: Manufacturer: Logitech
systemd-udevd[299]: starting version 204
lp: driver loaded but no devices found
mei_me 0000:00:03.0: irq 48 for MSI/MSI-X
ppdev: user-space parallel port driver
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 500000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
------------[ cut here ]------------
WARNING: CPU: 0 PID: 330 at /build/buildd/linux-3.13.0/drivers/gpu/drm/i915/intel_opregion.c:266 swsci+0x2ec/0x300 [i915]()
excessive driver sleep timeout (DSPL) 3288616980
Modules linked in: tpm_infineon(+) soundcore mac_hid i915(+) wmi video drm_kms_helper parport_pc(+) drm i2c_algo_bit mei_me mei ppdev lp parport psmouse ahci libahci e1000e ptp pps_core pata_acpi
CPU: 0 PID: 330 Comm: systemd-udevd Not tainted 3.13.0-46-generic #77-Ubuntu
Hardware name: Hewlett-Packard HP Compaq 6000 Pro MT PC/3048h, BIOS 786G2 v01.09 08/25/2009
0000000000000009 ffff8800d492d810 ffffffff817212c6 ffff8800d492d858
ffff8800d492d848 ffffffff810677dd ffffc9000473c940 ffff880036ea0800
00000000000001f4 0000000000000008 ffff8800d492d920 ffff8800d492d8a8
Call Trace:
[] dump_stack+0x45/0x56
[] warn_slowpath_common+0x7d/0xa0
[] warn_slowpath_fmt+0x4c/0x50
[] swsci+0x2ec/0x300 [i915]
[] intel_opregion_setup+0x204/0x3f0 [i915]
[] i915_driver_load+0x58d/0xe70 [i915]
[] drm_dev_register+0xa2/0x1e0 [drm]
[] drm_get_pci_dev+0x92/0x140 [drm]
[] i915_pci_probe+0x3c/0x90 [i915]
[] local_pci_probe+0x45/0xa0
[] ? pci_match_device+0xc5/0xd0
[] pci_device_probe+0xd9/0x130
[] driver_probe_device+0x12d/0x3e0
[] __driver_attach+0x93/0xa0
[] ? __device_attach+0x40/0x40
[] bus_for_each_dev+0x63/0xa0
[] driver_attach+0x1e/0x20
[] bus_add_driver+0x180/0x250
[] ? 0xffffffffa020afff
[] driver_register+0x64/0xf0
[] ? 0xffffffffa020afff
[] __pci_register_driver+0x4c/0x50
[] drm_pci_init+0x11a/0x130 [drm]
[] ? 0xffffffffa020afff
[] i915_init+0x6a/0x6c [i915]
[] do_one_initcall+0xfa/0x1b0
[] ? set_memory_nx+0x43/0x50
[] load_module+0x12dd/0x1b40
[] ? store_uevent+0x40/0x40
[] SyS_finit_module+0x86/0xb0
[] system_call_fastpath+0x1a/0x1f
---[ end trace b07b0858042c8f40 ]---
usb 3-2: new low-speed USB device number 3 using uhci_hcd
i915 0000:00:02.0: irq 49 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
lp0: using parport0 (interrupt-driven).
type=1400 audit(1431104770.068:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=378 comm="apparmor_parser"
type=1400 audit(1431104770.068:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=378 comm="apparmor_parser"
type=1400 audit(1431104770.068:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=378 comm="apparmor_parser"
type=1400 audit(1431104770.068:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=378 comm="apparmor_parser"
type=1400 audit(1431104770.068:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=378 comm="apparmor_parser"
type=1400 audit(1431104770.076:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=378 comm="apparmor_parser"
random: nonblocking pool is initialized
fbcon: inteldrmfb (fb0) is primary device
kvm: disabled by bios
usb 3-2: New USB device found, idVendor=17ef, idProduct=6018
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Lenovo USB Keyboard
usb 3-2: Manufacturer: Lite-On Technology Corp.
kvm: disabled by bios
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20131115/video-1286)
ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
hidraw: raw HID events driver (C) Jiri Kosina
SKU: Nid=0x1d sku_cfg=0x40028201
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000002
SKU: customization=0x00000082
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0x19
Line=0x18
realtek: No valid SSID, checking pincfg 0x40028201 for NID 0x1d
realtek: Enabling init ASM_ID=0x8201 CODEC_ID=10ec0662
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
type=1400 audit(1431104770.388:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=540 comm="apparmor_parser"
type=1400 audit(1431104770.388:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=540 comm="apparmor_parser"
type=1400 audit(1431104770.388:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=540 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
usb 4-2: new full-speed USB device number 2 using uhci_hcd
init: cups main process (542) killed by HUP signal
init: cups main process ended, respawning
gpio_ich: GPIO from 184 to 255 on gpio_ich
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input11
hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.0-1/input0
input: Lite-On Technology Corp. Lenovo USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input12
hid-generic 0003:17EF:6018.0002: input,hidraw1: USB HID v1.10 Keyboard [Lite-On Technology Corp. Lenovo USB Keyboard] on usb-0000:00:1a.0-2/input0
input: Lite-On Technology Corp. Lenovo USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input13
hid-generic 0003:17EF:6018.0003: input,hidraw2: USB HID v1.10 Device [Lite-On Technology Corp. Lenovo USB Keyboard] on usb-0000:00:1a.0-2/input1
input: HP WMI hotkeys as /devices/virtual/input/input10
init: failsafe main process (582) killed by TERM signal
usb 4-2: New USB device found, idVendor=0403, idProduct=6001
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-2: Product: TTL232R-3V3
usb 4-2: Manufacturer: FTDI
usb 4-2: SerialNumber: FTG9ZQJW
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver ftdi_sio
ftdi_sio 4-2:1.0: FTDI USB Serial Device converter detected
usb 4-2: Detected FT232RL
usb 4-2: Number of endpoints 2
usb 4-2: Endpoint 1 MaxPacketSize 64
usb 4-2: Endpoint 2 MaxPacketSize 64
usb 4-2: Setting MaxPacketSize 64
usb 4-2: FTDI USB Serial Device converter now attached to ttyUSB0
usb 2-3: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
usb 2-3: New USB device found, idVendor=148f, idProduct=5572
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: Product: 802.11 n WLAN
usb 2-3: Manufacturer: Ralink
usb 2-3: SerialNumber: 1.0
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
usb 2-6: new high-speed USB device number 4 using ehci-pci
usb 2-6: New USB device found, idVendor=11b0, idProduct=6348
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: USB3.0 Media Reader
usb 2-6: Manufacturer: Kingston
usb 2-6: SerialNumber: 08735315100214
usb-storage 2-6:1.0: USB Mass Storage device detected
scsi8 : usb-storage 2-6:1.0
usbcore: registered new interface driver usb-storage
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usb 2-3: reset high-speed USB device number 2 using ehci-pci
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 000f detected
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
usbcore: registered new interface driver rt2800usb
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
usb 8-1: new full-speed USB device number 2 using uhci_hcd
usb 8-1: New USB device found, idVendor=0403, idProduct=6001
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1: Product: TTL232R-3V3
usb 8-1: Manufacturer: FTDI
usb 8-1: SerialNumber: FTAJUFKF
ftdi_sio 8-1:1.0: FTDI USB Serial Device converter detected
usb 8-1: Detected FT232RL
usb 8-1: Number of endpoints 2
usb 8-1: Endpoint 1 MaxPacketSize 64
usb 8-1: Endpoint 2 MaxPacketSize 64
usb 8-1: Setting MaxPacketSize 64
usb 8-1: FTDI USB Serial Device converter now attached to ttyUSB1
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
scsi 8:0:0:0: Direct-Access FCR-HS3 -0 1.00 PQ: 0 ANSI: 4
scsi 8:0:0:1: Direct-Access FCR-HS3 -1 1.00 PQ: 0 ANSI: 4
scsi 8:0:0:2: Direct-Access FCR-HS3 -2 1.00 PQ: 0 ANSI: 4
scsi 8:0:0:3: Direct-Access FCR-HS3 -3 1.00 PQ: 0 ANSI: 4
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:1: Attached scsi generic sg3 type 0
sd 8:0:0:2: Attached scsi generic sg4 type 0
sd 8:0:0:3: Attached scsi generic sg5 type 0
sd 8:0:0:0: [sdb] Attached SCSI removable disk
sd 8:0:0:2: [sdd] Attached SCSI removable disk
sd 8:0:0:3: [sde] Attached SCSI removable disk
sd 8:0:0:1: [sdc] Attached SCSI removable disk
wlan0: authenticate with 00:12:5f:03:58:20
wlan0: send auth to 00:12:5f:03:58:20 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:12:5f:03:58:20 (try 1/3)
wlan0: RX AssocResp from 00:12:5f:03:58:20 (capab=0x411 status=0 aid=4)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: TW
cfg80211: Regulatory domain changed to country: TW
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlan0: deauthenticating from 00:12:5f:03:58:20 by local choice (reason=2)
wlan0: authenticate with 00:12:5f:03:58:20
wlan0: send auth to 00:12:5f:03:58:20 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticated
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: associate with 00:12:5f:03:58:20 (try 1/3)
wlan0: associate with 00:12:5f:03:58:20 (try 2/3)
wlan0: associate with 00:12:5f:03:58:20 (try 3/3)
wlan0: association with 00:12:5f:03:58:20 timed out
wlan0: authenticate with 00:12:5f:03:58:20
wlan0: send auth to 00:12:5f:03:58:20 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:12:5f:03:58:20 (try 1/3)
wlan0: RX AssocResp from 00:12:5f:03:58:20 (capab=0x411 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA for country: TW
cfg80211: Regulatory domain changed to country: TW
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
audit_printk_skb: 153 callbacks suppressed
type=1400 audit(1431104845.449:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2213 comm="apparmor_parser"
type=1400 audit(1431104845.449:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2213 comm="apparmor_parser"
type=1400 audit(1431104845.449:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2213 comm="apparmor_parser"
sd 8:0:0:1: [sdc] 14942208 512-byte logical blocks: (7.65 GB/7.12 GiB)
sdc: sdc1
EXT4-fs (sdc1): recovery complete
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
systemd-hostnamed[5788]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
sdc: detected capacity change from 7650410496 to 0
usb 2-6: USB disconnect, device number 4
usb 2-6: new high-speed USB device number 5 using ehci-pci
usb 2-6: New USB device found, idVendor=11b0, idProduct=6348
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: USB3.0 Media Reader
usb 2-6: Manufacturer: Kingston
usb 2-6: SerialNumber: 08735315100214
usb-storage 2-6:1.0: USB Mass Storage device detected
scsi9 : usb-storage 2-6:1.0
scsi 9:0:0:0: Direct-Access FCR-HS3 -0 1.00 PQ: 0 ANSI: 4
scsi 9:0:0:1: Direct-Access FCR-HS3 -1 1.00 PQ: 0 ANSI: 4
scsi 9:0:0:2: Direct-Access FCR-HS3 -2 1.00 PQ: 0 ANSI: 4
scsi 9:0:0:3: Direct-Access FCR-HS3 -3 1.00 PQ: 0 ANSI: 4
sd 9:0:0:0: Attached scsi generic sg2 type 0
sd 9:0:0:1: Attached scsi generic sg3 type 0
sd 9:0:0:2: Attached scsi generic sg4 type 0
sd 9:0:0:3: Attached scsi generic sg5 type 0
sd 9:0:0:1: [sdc] 14942208 512-byte logical blocks: (7.65 GB/7.12 GiB)
sd 9:0:0:1: [sdc] Write Protect is off
sd 9:0:0:1: [sdc] Mode Sense: 2f 00 00 00
sd 9:0:0:1: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 9:0:0:3: [sde] Attached SCSI removable disk
sd 9:0:0:0: [sdb] Attached SCSI removable disk
sdc: sdc1
sd 9:0:0:2: [sdd] Attached SCSI removable disk
sd 9:0:0:1: [sdc] Attached SCSI removable disk
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:12:5f:03:58:20
wlan0: send auth to 00:12:5f:03:58:20 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:12:5f:03:58:20 (try 1/3)
wlan0: RX AssocResp from 00:12:5f:03:58:20 (capab=0x411 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA for country: TW
cfg80211: Regulatory domain changed to country: TW
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
JBD2: Error -5 detected when updating journal superblock for sdc1-8.
JBD2: Error -5 detected when updating journal superblock for sdc1-8.
JBD2: Error -5 detected when updating journal superblock for sdc1-8.
sdc: detected capacity change from 7650410496 to 0
sd 9:0:0:1: [sdc] 14942208 512-byte logical blocks: (7.65 GB/7.12 GiB)
sdc: sdc1
EXT4-fs (sdc1): recovery complete
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
systemd-hostnamed[11491]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
perf samples too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
sdc: detected capacity change from 7650410496 to 0
sd 9:0:0:1: [sdc] 7471104 512-byte logical blocks: (3.82 GB/3.56 GiB)
sdc:
sdc: detected capacity change from 3825205248 to 0
sd 9:0:0:1: [sdc] 14942208 512-byte logical blocks: (7.65 GB/7.12 GiB)
sdc: sdc1
EXT4-fs (sdc1): recovery complete
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
systemd-hostnamed[14363]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:12:5f:03:58:20
wlan0: send auth to 00:12:5f:03:58:20 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:12:5f:03:58:20 (try 1/3)
wlan0: RX AssocResp from 00:12:5f:03:58:20 (capab=0x411 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA for country: TW
cfg80211: Regulatory domain changed to country: TW
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
sdc: detected capacity change from 7650410496 to 0
sd 9:0:0:1: [sdc] 14942208 512-byte logical blocks: (7.65 GB/7.12 GiB)
sdc: unknown partition table
EXT4-fs (sdc): VFS: Can't find ext4 filesystem
EXT4-fs (sdc): VFS: Can't find ext4 filesystem
EXT4-fs (sdc): VFS: Can't find ext4 filesystem
FAT-fs (sdc): bogus number of reserved sectors
FAT-fs (sdc): Can't find a valid FAT filesystem
sdc: sdc1
sdc: sdc1
sdc: detected capacity change from 7650410496 to 0
sd 9:0:0:1: [sdc] 14942208 512-byte logical blocks: (7.65 GB/7.12 GiB)
sdc: sdc1
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
systemd-hostnamed[15090]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
wlan0: AP 00:12:5f:03:58:20 changed bandwidth, new config is 2432 MHz, width 1 (2432/0 MHz)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:12:5f:03:58:20
wlan0: send auth to 00:12:5f:03:58:20 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:12:5f:03:58:20 (try 1/3)
wlan0: RX AssocResp from 00:12:5f:03:58:20 (capab=0x411 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA for country: TW
cfg80211: Regulatory domain changed to country: TW
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:12:5f:03:58:20
wlan0: send auth to 00:12:5f:03:58:20 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:12:5f:03:58:20 (try 1/3)
wlan0: RX AssocResp from 00:12:5f:03:58:20 (capab=0x411 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA for country: TW
cfg80211: Regulatory domain changed to country: TW
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
usb 2-3: USB disconnect, device number 2
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff]
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
systemd-hostnamed[22791]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
JBD2: Error -5 detected when updating journal superblock for sdc1-8.
JBD2: Error -5 detected when updating journal superblock for sdc1-8.
JBD2: Error -5 detected when updating journal superblock for sdc1-8.
JBD2: Error -5 detected when updating journal superblock for sdc1-8.
sd 9:0:0:1: [sdc] 14942208 512-byte logical blocks: (7.65 GB/7.12 GiB)
sdc: unknown partition table
sdc: sdc1
sdc: detected capacity change from 7650410496 to 0
sd 9:0:0:1: [sdc] 14942208 512-byte logical blocks: (7.65 GB/7.12 GiB)
sdc: sdc1
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
systemd-hostnamed[23255]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
systemd-hostnamed[23423]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
sd 9:0:0:1: [sdc] 14942208 512-byte logical blocks: (7.65 GB/7.12 GiB)
EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdc1): recovery complete
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc1): unable to read superblock
EXT4-fs (sdc1): unable to read superblock
EXT4-fs (sdc1): unable to read superblock
EXT4-fs (sdc1): unable to read superblock
sd 9:0:0:1: [sdc] 14942208 512-byte logical blocks: (7.65 GB/7.12 GiB)
EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
sd 9:0:0:1: [sdc] 14942208 512-byte logical blocks: (7.65 GB/7.12 GiB)
EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc1): unable to read superblock
EXT4-fs (sdc1): unable to read superblock
EXT4-fs (sdc1): unable to read superblock
EXT4-fs (sdc1): unable to read superblock
EXT4-fs (sdc1): unable to read superblock
EXT4-fs (sdc1): unable to read superblock
EXT4-fs (sdc1): unable to read superblock
EXT4-fs (sdc1): unable to read superblock
EXT4-fs (sdc1): unable to read superblock
EXT4-fs (sdc1): unable to read superblock
EXT4-fs (sdc1): unable to read superblock
EXT4-fs (sdc1): unable to read superblock
EXT4-fs (sdc1): unable to read superblock
sd 9:0:0:1: [sdc] 14942208 512-byte logical blocks: (7.65 GB/7.12 GiB)
EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
usb 2-6: USB disconnect, device number 5
usb 2-6: new high-speed USB device number 6 using ehci-pci
usb 2-6: New USB device found, idVendor=11b0, idProduct=6348
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: USB3.0 Media Reader
usb 2-6: Manufacturer: Kingston
usb 2-6: SerialNumber: 08735315100214
usb-storage 2-6:1.0: USB Mass Storage device detected
scsi10 : usb-storage 2-6:1.0
scsi 10:0:0:0: Direct-Access FCR-HS3 -0 1.00 PQ: 0 ANSI: 4
scsi 10:0:0:1: Direct-Access FCR-HS3 -1 1.00 PQ: 0 ANSI: 4
scsi 10:0:0:2: Direct-Access FCR-HS3 -2 1.00 PQ: 0 ANSI: 4
scsi 10:0:0:3: Direct-Access FCR-HS3 -3 1.00 PQ: 0 ANSI: 4
sd 10:0:0:0: Attached scsi generic sg2 type 0
sd 10:0:0:1: Attached scsi generic sg3 type 0
sd 10:0:0:2: Attached scsi generic sg4 type 0
sd 10:0:0:3: Attached scsi generic sg5 type 0
sd 10:0:0:1: [sdd] 14942208 512-byte logical blocks: (7.65 GB/7.12 GiB)
sd 10:0:0:1: [sdd] Write Protect is off
sd 10:0:0:1: [sdd] Mode Sense: 2f 00 00 00
sd 10:0:0:1: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 10:0:0:3: [sdf] Attached SCSI removable disk
sdd: sdd1
sd 10:0:0:0: [sdb] Attached SCSI removable disk
sd 10:0:0:2: [sde] Attached SCSI removable disk
sd 10:0:0:1: [sdd] Attached SCSI removable disk
EXT4-fs (sdd1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
sdd: detected capacity change from 7650410496 to 0
usb 2-6: USB disconnect, device number 6
usb 2-6: new high-speed USB device number 7 using ehci-pci
usb 2-6: New USB device found, idVendor=11b0, idProduct=6348
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: USB3.0 Media Reader
usb 2-6: Manufacturer: Kingston
usb 2-6: SerialNumber: 08735315100214
usb-storage 2-6:1.0: USB Mass Storage device detected
scsi11 : usb-storage 2-6:1.0
scsi 11:0:0:0: Direct-Access FCR-HS3 -0 1.00 PQ: 0 ANSI: 4
scsi 11:0:0:1: Direct-Access FCR-HS3 -1 1.00 PQ: 0 ANSI: 4
scsi 11:0:0:2: Direct-Access FCR-HS3 -2 1.00 PQ: 0 ANSI: 4
scsi 11:0:0:3: Direct-Access FCR-HS3 -3 1.00 PQ: 0 ANSI: 4
sd 11:0:0:0: Attached scsi generic sg2 type 0
sd 11:0:0:1: Attached scsi generic sg3 type 0
sd 11:0:0:2: Attached scsi generic sg4 type 0
sd 11:0:0:3: Attached scsi generic sg5 type 0
sd 11:0:0:1: [sdd] 14942208 512-byte logical blocks: (7.65 GB/7.12 GiB)
sd 11:0:0:1: [sdd] Write Protect is off
sd 11:0:0:1: [sdd] Mode Sense: 2f 00 00 00
sd 11:0:0:1: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 11:0:0:3: [sdf] Attached SCSI removable disk
sdd: sdd1
sd 11:0:0:0: [sdb] Attached SCSI removable disk
sd 11:0:0:2: [sde] Attached SCSI removable disk
sd 11:0:0:1: [sdd] Attached SCSI removable disk
EXT4-fs (sdd1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
sdd: detected capacity change from 7650410496 to 0
usb 2-6: USB disconnect, device number 7
usb 2-6: new high-speed USB device number 8 using ehci-pci
usb 2-6: New USB device found, idVendor=11b0, idProduct=6348
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: USB3.0 Media Reader
usb 2-6: Manufacturer: Kingston
usb 2-6: SerialNumber: 08735315100214
usb-storage 2-6:1.0: USB Mass Storage device detected
scsi12 : usb-storage 2-6:1.0
scsi 12:0:0:0: Direct-Access FCR-HS3 -0 1.00 PQ: 0 ANSI: 4
scsi 12:0:0:1: Direct-Access FCR-HS3 -1 1.00 PQ: 0 ANSI: 4
scsi 12:0:0:2: Direct-Access FCR-HS3 -2 1.00 PQ: 0 ANSI: 4
scsi 12:0:0:3: Direct-Access FCR-HS3 -3 1.00 PQ: 0 ANSI: 4
sd 12:0:0:0: Attached scsi generic sg2 type 0
sd 12:0:0:1: Attached scsi generic sg3 type 0
sd 12:0:0:2: Attached scsi generic sg4 type 0
sd 12:0:0:3: Attached scsi generic sg5 type 0
sd 12:0:0:1: [sdd] 14942208 512-byte logical blocks: (7.65 GB/7.12 GiB)
sd 12:0:0:1: [sdd] Write Protect is off
sd 12:0:0:1: [sdd] Mode Sense: 2f 00 00 00
sd 12:0:0:1: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 12:0:0:3: [sdf] Attached SCSI removable disk
sdd: sdd1
sd 12:0:0:0: [sdb] Attached SCSI removable disk
sd 12:0:0:2: [sde] Attached SCSI removable disk
sd 12:0:0:1: [sdd] Attached SCSI removable disk
EXT4-fs (sdd1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
sdd: detected capacity change from 7650410496 to 0
usb 2-6: USB disconnect, device number 8
usb 2-6: new high-speed USB device number 9 using ehci-pci
usb 2-6: New USB device found, idVendor=11b0, idProduct=6348
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: USB3.0 Media Reader
usb 2-6: Manufacturer: Kingston
usb 2-6: SerialNumber: 08735315100214
usb-storage 2-6:1.0: USB Mass Storage device detected
scsi13 : usb-storage 2-6:1.0
scsi 13:0:0:0: Direct-Access FCR-HS3 -0 1.00 PQ: 0 ANSI: 4
scsi 13:0:0:1: Direct-Access FCR-HS3 -1 1.00 PQ: 0 ANSI: 4
scsi 13:0:0:2: Direct-Access FCR-HS3 -2 1.00 PQ: 0 ANSI: 4
scsi 13:0:0:3: Direct-Access FCR-HS3 -3 1.00 PQ: 0 ANSI: 4
sd 13:0:0:0: Attached scsi generic sg2 type 0
sd 13:0:0:1: Attached scsi generic sg3 type 0
sd 13:0:0:2: Attached scsi generic sg4 type 0
sd 13:0:0:3: Attached scsi generic sg5 type 0
sd 13:0:0:1: [sdd] 14942208 512-byte logical blocks: (7.65 GB/7.12 GiB)
sd 13:0:0:1: [sdd] Write Protect is off
sd 13:0:0:1: [sdd] Mode Sense: 2f 00 00 00
sd 13:0:0:1: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 13:0:0:3: [sdf] Attached SCSI removable disk
sd 13:0:0:0: [sdb] Attached SCSI removable disk
sdd: sdd1
sd 13:0:0:2: [sde] Attached SCSI removable disk
sd 13:0:0:1: [sdd] Attached SCSI removable disk
EXT4-fs (sdd1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
sdd: detected capacity change from 7650410496 to 0
usb 2-6: USB disconnect, device number 9
usb 2-6: new high-speed USB device number 10 using ehci-pci
usb 2-6: New USB device found, idVendor=11b0, idProduct=6348
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: USB3.0 Media Reader
usb 2-6: Manufacturer: Kingston
usb 2-6: SerialNumber: 08735315100214
usb-storage 2-6:1.0: USB Mass Storage device detected
scsi14 : usb-storage 2-6:1.0
scsi 14:0:0:0: Direct-Access FCR-HS3 -0 1.00 PQ: 0 ANSI: 4
scsi 14:0:0:1: Direct-Access FCR-HS3 -1 1.00 PQ: 0 ANSI: 4
scsi 14:0:0:2: Direct-Access FCR-HS3 -2 1.00 PQ: 0 ANSI: 4
scsi 14:0:0:3: Direct-Access FCR-HS3 -3 1.00 PQ: 0 ANSI: 4
sd 14:0:0:0: Attached scsi generic sg2 type 0
sd 14:0:0:1: Attached scsi generic sg3 type 0
sd 14:0:0:2: Attached scsi generic sg4 type 0
sd 14:0:0:3: Attached scsi generic sg5 type 0
sd 14:0:0:1: [sdd] 14942208 512-byte logical blocks: (7.65 GB/7.12 GiB)
sd 14:0:0:1: [sdd] Write Protect is off
sd 14:0:0:1: [sdd] Mode Sense: 2f 00 00 00
sd 14:0:0:1: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 14:0:0:2: [sde] Attached SCSI removable disk
sd 14:0:0:3: [sdf] Attached SCSI removable disk
sdd: sdd1
sd 14:0:0:0: [sdb] Attached SCSI removable disk
sd 14:0:0:1: [sdd] Attached SCSI removable disk
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
sdd: detected capacity change from 7650410496 to 0
usb 2-6: USB disconnect, device number 10
usb 2-6: new high-speed USB device number 11 using ehci-pci
usb 2-6: New USB device found, idVendor=11b0, idProduct=6348
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: USB3.0 Media Reader
usb 2-6: Manufacturer: Kingston
usb 2-6: SerialNumber: 08735315100214
usb-storage 2-6:1.0: USB Mass Storage device detected
scsi15 : usb-storage 2-6:1.0
scsi 15:0:0:0: Direct-Access FCR-HS3 -0 1.00 PQ: 0 ANSI: 4
scsi 15:0:0:1: Direct-Access FCR-HS3 -1 1.00 PQ: 0 ANSI: 4
scsi 15:0:0:2: Direct-Access FCR-HS3 -2 1.00 PQ: 0 ANSI: 4
scsi 15:0:0:3: Direct-Access FCR-HS3 -3 1.00 PQ: 0 ANSI: 4
sd 15:0:0:0: Attached scsi generic sg2 type 0
sd 15:0:0:1: Attached scsi generic sg3 type 0
sd 15:0:0:2: Attached scsi generic sg4 type 0
sd 15:0:0:3: Attached scsi generic sg5 type 0
sd 15:0:0:1: [sdd] 14942208 512-byte logical blocks: (7.65 GB/7.12 GiB)
sd 15:0:0:1: [sdd] Write Protect is off
sd 15:0:0:1: [sdd] Mode Sense: 2f 00 00 00
sd 15:0:0:1: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 15:0:0:2: [sde] Attached SCSI removable disk
sd 15:0:0:0: [sdb] Attached SCSI removable disk
sdd: sdd1
sd 15:0:0:3: [sdf] Attached SCSI removable disk
sd 15:0:0:1: [sdd] Attached SCSI removable disk
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
systemd-hostnamed[25170]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
INFO: task tiotest:26669 blocked for more than 120 seconds.
Tainted: G W 3.13.0-46-generic #77-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
tiotest D ffff88011bc934c0 0 26669 26657 0x00000000
ffff8800c9ddfb78 0000000000000086 ffff8800c3ecc800 ffff8800c9ddffd8
00000000000134c0 00000000000134c0 ffff8800c3ecc800 ffff88011bc93d58
ffff88011bfd8ee8 0000000000000002 ffffffff8114eef0 ffff8800c9ddfbf0
Call Trace:
[] ? wait_on_page_read+0x60/0x60
[] io_schedule+0x9d/0x140
[] sleep_on_page+0xe/0x20
[] __wait_on_bit+0x62/0x90
[] wait_on_page_bit+0x7f/0x90
[] ? autoremove_wake_function+0x40/0x40
[] filemap_fdatawait_range+0xf9/0x190
[] ? do_writepages+0x1e/0x40
[] ? __filemap_fdatawrite_range+0x59/0x60
[] filemap_write_and_wait_range+0x3f/0x70
[] ext4_sync_file+0xba/0x320
[] generic_write_sync+0x48/0x60
[] generic_file_aio_write+0x76/0xa0
[] ext4_file_write+0x99/0x400
[] ? thread_group_cputime+0x7b/0xb0
[] ? thread_group_cputime_adjusted+0x41/0x50
[] ? get_task_mm+0x41/0x60
[] do_sync_write+0x5a/0x90
[] vfs_write+0xb4/0x1f0
[] SyS_write+0x49/0xa0
[] system_call_fastpath+0x1a/0x1f
INFO: task tiotest:26669 blocked for more than 120 seconds.
Tainted: G W 3.13.0-46-generic #77-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
tiotest D ffff88011bc934c0 0 26669 26657 0x00000000
ffff8800c9ddfb78 0000000000000086 ffff8800c3ecc800 ffff8800c9ddffd8
00000000000134c0 00000000000134c0 ffff8800c3ecc800 ffff88011bc93d58
ffff88011bfd8ee8 0000000000000002 ffffffff8114eef0 ffff8800c9ddfbf0
Call Trace:
[] ? wait_on_page_read+0x60/0x60
[] io_schedule+0x9d/0x140
[] sleep_on_page+0xe/0x20
[] __wait_on_bit+0x62/0x90
[] wait_on_page_bit+0x7f/0x90
[] ? autoremove_wake_function+0x40/0x40
[] filemap_fdatawait_range+0xf9/0x190
[] ? do_writepages+0x1e/0x40
[] ? __filemap_fdatawrite_range+0x59/0x60
[] filemap_write_and_wait_range+0x3f/0x70
[] ext4_sync_file+0xba/0x320
[] generic_write_sync+0x48/0x60
[] generic_file_aio_write+0x76/0xa0
[] ext4_file_write+0x99/0x400
[] ? thread_group_cputime+0x7b/0xb0
[] ? thread_group_cputime_adjusted+0x41/0x50
[] ? get_task_mm+0x41/0x60
[] do_sync_write+0x5a/0x90
[] vfs_write+0xb4/0x1f0
[] SyS_write+0x49/0xa0
[] system_call_fastpath+0x1a/0x1f
INFO: task tiotest:26669 blocked for more than 120 seconds.
Tainted: G W 3.13.0-46-generic #77-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
tiotest D ffff88011bc934c0 0 26669 26657 0x00000000
ffff8800c9ddfb78 0000000000000086 ffff8800c3ecc800 ffff8800c9ddffd8
00000000000134c0 00000000000134c0 ffff8800c3ecc800 ffff88011bc93d58
ffff88011bfd8ee8 0000000000000002 ffffffff8114eef0 ffff8800c9ddfbf0
Call Trace:
[] ? wait_on_page_read+0x60/0x60
[] io_schedule+0x9d/0x140
[] sleep_on_page+0xe/0x20
[] __wait_on_bit+0x62/0x90
[] wait_on_page_bit+0x7f/0x90
[] ? autoremove_wake_function+0x40/0x40
[] filemap_fdatawait_range+0xf9/0x190
[] ? do_writepages+0x1e/0x40
[] ? __filemap_fdatawrite_range+0x59/0x60
[] filemap_write_and_wait_range+0x3f/0x70
[] ext4_sync_file+0xba/0x320
[] generic_write_sync+0x48/0x60
[] generic_file_aio_write+0x76/0xa0
[] ext4_file_write+0x99/0x400
[] ? thread_group_cputime+0x7b/0xb0
[] ? thread_group_cputime_adjusted+0x41/0x50
[] ? get_task_mm+0x41/0x60
[] do_sync_write+0x5a/0x90
[] vfs_write+0xb4/0x1f0
[] SyS_write+0x49/0xa0
[] system_call_fastpath+0x1a/0x1f
INFO: task tiotest:26669 blocked for more than 120 seconds.
Tainted: G W 3.13.0-46-generic #77-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
tiotest D ffff88011bc934c0 0 26669 26657 0x00000000
ffff8800c9ddfb78 0000000000000086 ffff8800c3ecc800 ffff8800c9ddffd8
00000000000134c0 00000000000134c0 ffff8800c3ecc800 ffff88011bc93d58
ffff88011bfd8ee8 0000000000000002 ffffffff8114eef0 ffff8800c9ddfbf0
Call Trace:
[] ? wait_on_page_read+0x60/0x60
[] io_schedule+0x9d/0x140
[] sleep_on_page+0xe/0x20
[] __wait_on_bit+0x62/0x90
[] wait_on_page_bit+0x7f/0x90
[] ? autoremove_wake_function+0x40/0x40
[] filemap_fdatawait_range+0xf9/0x190
[] ? do_writepages+0x1e/0x40
[] ? __filemap_fdatawrite_range+0x59/0x60
[] filemap_write_and_wait_range+0x3f/0x70
[] ext4_sync_file+0xba/0x320
[] generic_write_sync+0x48/0x60
[] generic_file_aio_write+0x76/0xa0
[] ext4_file_write+0x99/0x400
[] ? thread_group_cputime+0x7b/0xb0
[] ? thread_group_cputime_adjusted+0x41/0x50
[] ? get_task_mm+0x41/0x60
[] do_sync_write+0x5a/0x90
[] vfs_write+0xb4/0x1f0
[] SyS_write+0x49/0xa0
[] system_call_fastpath+0x1a/0x1f
INFO: task tiotest:26669 blocked for more than 120 seconds.
Tainted: G W 3.13.0-46-generic #77-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
tiotest D ffff88011bc934c0 0 26669 26657 0x00000000
ffff8800c9ddfb78 0000000000000086 ffff8800c3ecc800 ffff8800c9ddffd8
00000000000134c0 00000000000134c0 ffff8800c3ecc800 ffff88011bc93d58
ffff88011bfd8ee8 0000000000000002 ffffffff8114eef0 ffff8800c9ddfbf0
Call Trace:
[] ? wait_on_page_read+0x60/0x60
[] io_schedule+0x9d/0x140
[] sleep_on_page+0xe/0x20
[] __wait_on_bit+0x62/0x90
[] wait_on_page_bit+0x7f/0x90
[] ? autoremove_wake_function+0x40/0x40
[] filemap_fdatawait_range+0xf9/0x190
[] ? do_writepages+0x1e/0x40
[] ? __filemap_fdatawrite_range+0x59/0x60
[] filemap_write_and_wait_range+0x3f/0x70
[] ext4_sync_file+0xba/0x320
[] generic_write_sync+0x48/0x60
[] generic_file_aio_write+0x76/0xa0
[] ext4_file_write+0x99/0x400
[] ? thread_group_cputime+0x7b/0xb0
[] ? thread_group_cputime_adjusted+0x41/0x50
[] ? get_task_mm+0x41/0x60
[] do_sync_write+0x5a/0x90
[] vfs_write+0xb4/0x1f0
[] SyS_write+0x49/0xa0
[] system_call_fastpath+0x1a/0x1f
INFO: task tiotest:26669 blocked for more than 120 seconds.
Tainted: G W 3.13.0-46-generic #77-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
tiotest D ffff88011bc934c0 0 26669 26657 0x00000000
ffff8800c9ddfb78 0000000000000086 ffff8800c3ecc800 ffff8800c9ddffd8
00000000000134c0 00000000000134c0 ffff8800c3ecc800 ffff88011bc93d58
ffff88011bfd8ee8 0000000000000002 ffffffff8114eef0 ffff8800c9ddfbf0
Call Trace:
[] ? wait_on_page_read+0x60/0x60
[] io_schedule+0x9d/0x140
[] sleep_on_page+0xe/0x20
[] __wait_on_bit+0x62/0x90
[] wait_on_page_bit+0x7f/0x90
[] ? autoremove_wake_function+0x40/0x40
[] filemap_fdatawait_range+0xf9/0x190
[] ? do_writepages+0x1e/0x40
[] ? __filemap_fdatawrite_range+0x59/0x60
[] filemap_write_and_wait_range+0x3f/0x70
[] ext4_sync_file+0xba/0x320
[] generic_write_sync+0x48/0x60
[] generic_file_aio_write+0x76/0xa0
[] ext4_file_write+0x99/0x400
[] ? thread_group_cputime+0x7b/0xb0
[] ? thread_group_cputime_adjusted+0x41/0x50
[] ? get_task_mm+0x41/0x60
[] do_sync_write+0x5a/0x90
[] vfs_write+0xb4/0x1f0
[] SyS_write+0x49/0xa0
[] system_call_fastpath+0x1a/0x1f
INFO: task tiotest:26669 blocked for more than 120 seconds.
Tainted: G W 3.13.0-46-generic #77-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
tiotest D ffff88011bc934c0 0 26669 26657 0x00000000
ffff8800c9ddfb78 0000000000000086 ffff8800c3ecc800 ffff8800c9ddffd8
00000000000134c0 00000000000134c0 ffff8800c3ecc800 ffff88011bc93d58
ffff88011bfd8ee8 0000000000000002 ffffffff8114eef0 ffff8800c9ddfbf0
Call Trace:
[] ? wait_on_page_read+0x60/0x60
[] io_schedule+0x9d/0x140
[] sleep_on_page+0xe/0x20
[] __wait_on_bit+0x62/0x90
[] wait_on_page_bit+0x7f/0x90
[] ? autoremove_wake_function+0x40/0x40
[] filemap_fdatawait_range+0xf9/0x190
[] ? do_writepages+0x1e/0x40
[] ? __filemap_fdatawrite_range+0x59/0x60
[] filemap_write_and_wait_range+0x3f/0x70
[] ext4_sync_file+0xba/0x320
[] generic_write_sync+0x48/0x60
[] generic_file_aio_write+0x76/0xa0
[] ext4_file_write+0x99/0x400
[] ? thread_group_cputime+0x7b/0xb0
[] ? thread_group_cputime_adjusted+0x41/0x50
[] ? get_task_mm+0x41/0x60
[] do_sync_write+0x5a/0x90
[] vfs_write+0xb4/0x1f0
[] SyS_write+0x49/0xa0
[] system_call_fastpath+0x1a/0x1f
INFO: task tiotest:26669 blocked for more than 120 seconds.
Tainted: G W 3.13.0-46-generic #77-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
tiotest D ffff88011bc934c0 0 26669 26657 0x00000000
ffff8800c9ddfb78 0000000000000086 ffff8800c3ecc800 ffff8800c9ddffd8
00000000000134c0 00000000000134c0 ffff8800c3ecc800 ffff88011bc93d58
ffff88011bfd8ee8 0000000000000002 ffffffff8114eef0 ffff8800c9ddfbf0
Call Trace:
[] ? wait_on_page_read+0x60/0x60
[] io_schedule+0x9d/0x140
[] sleep_on_page+0xe/0x20
[] __wait_on_bit+0x62/0x90
[] wait_on_page_bit+0x7f/0x90
[] ? autoremove_wake_function+0x40/0x40
[] filemap_fdatawait_range+0xf9/0x190
[] ? do_writepages+0x1e/0x40
[] ? __filemap_fdatawrite_range+0x59/0x60
[] filemap_write_and_wait_range+0x3f/0x70
[] ext4_sync_file+0xba/0x320
[] generic_write_sync+0x48/0x60
[] generic_file_aio_write+0x76/0xa0
[] ext4_file_write+0x99/0x400
[] ? thread_group_cputime+0x7b/0xb0
[] ? thread_group_cputime_adjusted+0x41/0x50
[] ? get_task_mm+0x41/0x60
[] do_sync_write+0x5a/0x90
[] vfs_write+0xb4/0x1f0
[] SyS_write+0x49/0xa0
[] system_call_fastpath+0x1a/0x1f
INFO: task tiotest:26669 blocked for more than 120 seconds.
Tainted: G W 3.13.0-46-generic #77-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
tiotest D ffff88011bc934c0 0 26669 26657 0x00000000
ffff8800c9ddfb78 0000000000000086 ffff8800c3ecc800 ffff8800c9ddffd8
00000000000134c0 00000000000134c0 ffff8800c3ecc800 ffff88011bc93d58
ffff88011bfd8ee8 0000000000000002 ffffffff8114eef0 ffff8800c9ddfbf0
Call Trace:
[] ? wait_on_page_read+0x60/0x60
[] io_schedule+0x9d/0x140
[] sleep_on_page+0xe/0x20
[] __wait_on_bit+0x62/0x90
[] wait_on_page_bit+0x7f/0x90
[] ? autoremove_wake_function+0x40/0x40
[] filemap_fdatawait_range+0xf9/0x190
[] ? do_writepages+0x1e/0x40
[] ? __filemap_fdatawrite_range+0x59/0x60
[] filemap_write_and_wait_range+0x3f/0x70
[] ext4_sync_file+0xba/0x320
[] generic_write_sync+0x48/0x60
[] generic_file_aio_write+0x76/0xa0
[] ext4_file_write+0x99/0x400
[] ? thread_group_cputime+0x7b/0xb0
[] ? thread_group_cputime_adjusted+0x41/0x50
[] ? get_task_mm+0x41/0x60
[] do_sync_write+0x5a/0x90
[] vfs_write+0xb4/0x1f0
[] SyS_write+0x49/0xa0
[] system_call_fastpath+0x1a/0x1f
INFO: task tiotest:26669 blocked for more than 120 seconds.
Tainted: G W 3.13.0-46-generic #77-Ubuntu
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
tiotest D ffff88011bc934c0 0 26669 26657 0x00000000
ffff8800c9ddfb78 0000000000000086 ffff8800c3ecc800 ffff8800c9ddffd8
00000000000134c0 00000000000134c0 ffff8800c3ecc800 ffff88011bc93d58
ffff88011bfd8ee8 0000000000000002 ffffffff8114eef0 ffff8800c9ddfbf0
Call Trace:
[] ? wait_on_page_read+0x60/0x60
[] io_schedule+0x9d/0x140
[] sleep_on_page+0xe/0x20
[] __wait_on_bit+0x62/0x90
[] wait_on_page_bit+0x7f/0x90
[] ? autoremove_wake_function+0x40/0x40
[] filemap_fdatawait_range+0xf9/0x190
[] ? do_writepages+0x1e/0x40
[] ? __filemap_fdatawrite_range+0x59/0x60
[] filemap_write_and_wait_range+0x3f/0x70
[] ext4_sync_file+0xba/0x320
[] generic_write_sync+0x48/0x60
[] generic_file_aio_write+0x76/0xa0
[] ext4_file_write+0x99/0x400
[] ? thread_group_cputime+0x7b/0xb0
[] ? thread_group_cputime_adjusted+0x41/0x50
[] ? get_task_mm+0x41/0x60
[] do_sync_write+0x5a/0x90
[] vfs_write+0xb4/0x1f0
[] SyS_write+0x49/0xa0
[] system_call_fastpath+0x1a/0x1f
type=1400 audit(1431183495.231:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=27237 comm="apparmor_parser"
type=1400 audit(1431183495.231:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=27237 comm="apparmor_parser"
type=1400 audit(1431183495.231:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=27237 comm="apparmor_parser"
type=1400 audit(1431268841.886:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=28750 comm="apparmor_parser"
type=1400 audit(1431268841.886:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=28750 comm="apparmor_parser"
type=1400 audit(1431268841.886:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=28750 comm="apparmor_parser"
type=1400 audit(1431356475.705:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=30245 comm="apparmor_parser"
type=1400 audit(1431356475.705:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=30245 comm="apparmor_parser"
type=1400 audit(1431356475.705:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=30245 comm="apparmor_parser"