dmesg - system_test
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-51-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #84-Ubuntu SMP Wed Apr 15 12:11:46 UTC 2015 (Ubuntu 3.13.0-51.84-generic 3.13.11-ckt18)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ca030fff] usable
BIOS-e820: [mem 0x00000000ca031000-0x00000000ca037fff] ACPI NVS
BIOS-e820: [mem 0x00000000ca038000-0x00000000cab54fff] usable
BIOS-e820: [mem 0x00000000cab55000-0x00000000cb0c8fff] reserved
BIOS-e820: [mem 0x00000000cb0c9000-0x00000000ddb41fff] usable
BIOS-e820: [mem 0x00000000ddb42000-0x00000000ddbd9fff] reserved
BIOS-e820: [mem 0x00000000ddbda000-0x00000000ddc1afff] usable
BIOS-e820: [mem 0x00000000ddc1b000-0x00000000ddce3fff] ACPI NVS
BIOS-e820: [mem 0x00000000ddce4000-0x00000000df7fefff] reserved
BIOS-e820: [mem 0x00000000df7ff000-0x00000000df7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. Z87X-UD5H/Z87X-UD5H-CF, BIOS 10c 06/12/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41f000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FF0000000 write-back
2 base 0410000000 mask 7FF8000000 write-back
3 base 0418000000 mask 7FFC000000 write-back
4 base 041C000000 mask 7FFE000000 write-back
5 base 041E000000 mask 7FFF000000 write-back
6 base 00E0000000 mask 7FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 256MB, type WB
reg 2, base: 16640MB, range: 128MB, type WB
reg 3, base: 16768MB, range: 64MB, type WB
reg 4, base: 16832MB, range: 32MB, type WB
reg 5, base: 16864MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
total RAM covered: 16368M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 512MB, type WB
reg 6, base: 16880MB, range: 16MB, type UC
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
found SMP MP-table at [mem 0x000fd780-0x000fd78f] mapped at [c00fd780]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
[mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01b99000, 0x01b99fff] PGTABLE
RAMDISK: [mem 0x35c20000-0x36e07fff]
ACPI: RSDP 000f0490 000024 (v02 ALASKA)
ACPI: XSDT ddcb2080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP ddcbfa20 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT ddcb2190 00D889 (v02 ALASKA A M I 00000088 INTL 20091112)
ACPI: FACS ddce2080 000040
ACPI: APIC ddcbfb30 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT ddcbfbc8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT ddcbfc10 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT ddcc0150 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
ACPI: MCFG ddcc0c28 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET ddcc0c68 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT ddcc0ca0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT ddcc1010 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: DMAR ddcc44f8 000080 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: MATS ddcc4578 000034 (v02 ALASKA A M I 00000002 w?x2 00000000)
ACPI: Local APIC address 0xfee00000
15988MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
BRK [0x01b9a000, 0x01b9afff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x1effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xca030fff]
node 0: [mem 0xca038000-0xcab54fff]
node 0: [mem 0xcb0c9000-0xddb41fff]
node 0: [mem 0xddbda000-0xddc1afff]
node 0: [mem 0xdf7ff000-0xdf7fffff]
node 0: [mem 0x00000000-0x1effffff]
On node 0 totalpages: 4179365
free_area_init_node: node 0, pgdat c199f780, node_mem_map ed840020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3996 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 224254 pages, LIFO batch:31
HighMem zone: 31977 pages used for memmap
HighMem zone: 3951115 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7b7b000 s35520 r0 d21824 u57344
pcpu-alloc: s35520 r0 d21824 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4177581
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
xsave: enabled xstate_bv 0x7, cntxt size 0x340
allocated 34570232 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0041f000)
Memory: 16517040K/16717460K available (6553K kernel code, 641K rwdata, 2768K rodata, 880K init, 924K bss, 200420K reserved, 15804460K highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc19bd000 - 0xc1a99000 ( 880 kB)
.data : 0xc16667b4 - 0xc19bc600 (3415 kB)
.text : 0xc1000000 - 0xc16667b4 (6553 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:744 16
CPU 0 irqstacks, hard=f740a000 soft=f740c000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3392.220 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.44 BogoMIPS (lpj=13568880)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (c1a99000 - c1aa1000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27866 entries in 55 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1240 v3 @ 3.40GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
CPU 1 irqstacks, hard=f7550000 soft=f7552000
x86: Booting SMP configuration:
Initializing CPU#1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1
CPU 2 irqstacks, hard=f7620000 soft=f7622000
Initializing CPU#2
#2
CPU 3 irqstacks, hard=f7666000 soft=f7668000
Initializing CPU#3
#3
CPU 4 irqstacks, hard=f76aa000 soft=f76ac000
Initializing CPU#4
#4
CPU 5 irqstacks, hard=f7716000 soft=f7718000
Initializing CPU#5
#5
CPU 6 irqstacks, hard=f7760000 soft=f7762000
Initializing CPU#6
#6
CPU 7 irqstacks, hard=f77a4000 soft=f77a6000
Initializing CPU#7
#7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (54275.52 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xca031000-0xca037fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xddc1b000-0xddce3fff] (823296 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 18:21:33, date: 05/02/15
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT ddbcfc18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: SSDT ddbcf618 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: SSDT ddbced98 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7f20000-0xf7f2ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7f3b000-0xf7f3b00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7f00000-0xf7f1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7f39000-0xf7f39fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7f38000-0xf7f383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7f30000-0xf7f33fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7f37000-0xf7f373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7f36000-0xf7f367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7f35000-0xf7f350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [1002:6798] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xf7e00000-0xf7e3ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xf7e40000-0xf7e5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7e60000-0xf7e63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:1533] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xf7a00000-0xf7afffff]
pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:03:00.0: reg 0x1c: [mem 0xf7b00000-0xf7b03fff]
pci 0000:03:00.0: reg 0x30: [mem 0xf7900000-0xf79fffff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7900000-0xf7bfffff]
pci 0000:04:00.0: [1b4b:9230] type 00 class 0x010601
pci 0000:04:00.0: reg 0x10: [io 0xc050-0xc057]
pci 0000:04:00.0: reg 0x14: [io 0xc040-0xc043]
pci 0000:04:00.0: reg 0x18: [io 0xc030-0xc037]
pci 0000:04:00.0: reg 0x1c: [io 0xc020-0xc023]
pci 0000:04:00.0: reg 0x20: [io 0xc000-0xc01f]
pci 0000:04:00.0: reg 0x24: [mem 0xf7d10000-0xf7d107ff]
pci 0000:04:00.0: reg 0x30: [mem 0xf7d00000-0xf7d0ffff pref]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:05:00.0: [8086:244e] type 01 class 0x060401
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: PCI bridge to [bus 05-06]
pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:06:01.0: [1106:3044] type 00 class 0x0c0010
pci 0000:06:01.0: reg 0x10: [mem 0xf7c00000-0xf7c007ff]
pci 0000:06:01.0: reg 0x14: [io 0xb000-0xb07f]
pci 0000:06:01.0: supports D2
pci 0000:06:01.0: PME# supported from D2 D3hot D3cold
pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode)
pci 0000:05:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:05:00.0: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:05:00.0: bridge window [io 0xb000-0xbfff] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0xf7c00000-0xf7cfffff] (subtractive decode)
pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xca031000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcab55000-0xcbffffff]
e820: reserve RAM buffer [mem 0xddb42000-0xdfffffff]
e820: reserve RAM buffer [mem 0xddc1b000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x1c00-0x1cfe] has been reserved
system 00:05: [io 0x1d00-0x1dfe] has been reserved
system 00:05: [io 0x1e00-0x1efe] has been reserved
system 00:05: [io 0x1f00-0x1ffe] has been reserved
system 00:05: [io 0x1800-0x18fe] could not be reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io 0x1854-0x1857] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:08: [io 0x0a00-0x0a0f] has been reserved
system 00:08: [io 0x0a30-0x0a3f] has been reserved
system 00:08: [io 0x0a20-0x0a2f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0a: [io 0x04d0-0x04d1] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: [mem 0xf7fdf000-0xf7fdffff] has been reserved
system 00:0b: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7900000-0xf7bfffff]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:05:00.0: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.6: PCI bridge to [bus 05-06]
pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf7bfffff]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:06: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:06: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:06: resource 4 [io 0xb000-0xbfff]
pci_bus 0000:06: resource 5 [mem 0xf7c00000-0xf7cfffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18336K (f5c20000 - f6e08000)
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
dmar: RMRR base: 0x000000df50e000 end: 0x000000df51cfff
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x19
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1430590893.532:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1427
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 2560x1440x32, linelength=10240, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xf8480000, using 14400k, total 14400k
Console: switching to colour frame buffer device 320x90
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f38000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-51-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f37000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-51-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-51-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-51-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
isapnp: No Plug & Play device found
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 1f88723dce4086a12303dadd54a7ae35e9e44d58'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 15:873:391
hub 3-0:1.0: hash matches
thermal cooling_device6: hash matches
rtc_cmos 00:06: setting system clock to 2015-05-02 18:21:35 UTC (1430590895)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 880K (c19bd000 - c1a99000)
Write protecting the kernel text: 6556k
Write protecting the kernel read-only data: 2772k
NX-protecting the kernel data: 5732k
systemd-udevd[128]: starting version 204
usb 1-1: new high-speed USB device number 2 using ehci-pci
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
dca service started, version 1.12.1
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7f36000 port 0xf7f36100 irq 42
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf7f36000 port 0xf7f36200 irq 42
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ahci 0000:04:00.0: irq 43 for MSI/MSI-X
ahci 0000:04:00.0: controller can do FBS, turning on CAP_FBS
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
igb: Copyright (c) 2007-2013 Intel Corporation.
ahci 0000:04:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq fbs pio
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
scsi10 : ahci
scsi11 : ahci
scsi12 : ahci
scsi13 : ahci
ata7: SATA max UDMA/133 abar m2048@0xf7d10000 port 0xf7d10100 irq 43
ata8: SATA max UDMA/133 abar m2048@0xf7d10000 port 0xf7d10180 irq 43
ata9: SATA max UDMA/133 abar m2048@0xf7d10000 port 0xf7d10200 irq 43
ata10: SATA max UDMA/133 abar m2048@0xf7d10000 port 0xf7d10280 irq 43
ata11: SATA max UDMA/133 abar m2048@0xf7d10000 port 0xf7d10300 irq 43
ata12: SATA max UDMA/133 abar m2048@0xf7d10000 port 0xf7d10380 irq 43
ata13: SATA max UDMA/133 abar m2048@0xf7d10000 port 0xf7d10400 irq 43
ata14: SATA max UDMA/133 abar m2048@0xf7d10000 port 0xf7d10480 irq 43
firewire_ohci 0000:06:01.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
igb 0000:03:00.0: irq 45 for MSI/MSI-X
igb 0000:03:00.0: irq 46 for MSI/MSI-X
igb 0000:03:00.0: irq 47 for MSI/MSI-X
igb 0000:03:00.0: irq 48 for MSI/MSI-X
igb 0000:03:00.0: irq 49 for MSI/MSI-X
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
igb 0000:03:00.0: added PHC on eth0
igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 74:d4:35:1d:58:25
igb 0000:03:00.0: eth0: PBA No: 000200-000
igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
e1000e 0000:00:19.0 eth1: registered PHC clock
e1000e 0000:00:19.0 eth1: (PCI Express:2.5GT/s:Width x1) 74:d4:35:1b:c1:35
e1000e 0000:00:19.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth1: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
usb 2-1: new high-speed USB device number 2 using ehci-pci
tsc: Refined TSC clocksource calibration: 3392.144 MHz
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: Hitachi HUA722010CLA330, JP4OA3EA, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0AB0Q, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
scsi 2:0:0:0: Direct-Access ATA Hitachi HUA72201 JP4O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata13: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata14.00: configured for UDMA/66
scsi 13:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5
scsi 13:0:0:0: Attached scsi generic sg2 type 3
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 4-5: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-5: New USB device found, idVendor=045b, idProduct=0210
usb 4-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-5:1.0: USB hub found
hub 4-5:1.0: 4 ports detected
random: init urandom read with 53 bits of entropy available
firewire_core 0000:06:01.0: created device fw0: GUID 00342b90a4c55b00, S400
init: plymouth-upstart-bridge main process (224) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (235) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (238) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 4-6: new SuperSpeed USB device number 3 using xhci_hcd
usb 4-6: New USB device found, idVendor=045b, idProduct=0210
usb 4-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-6:1.0: USB hub found
hub 4-6:1.0: 4 ports detected
Adding 4192252k swap on /dev/sda5. Priority:-1 extents:1 across:4192252k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
systemd-udevd[393]: starting version 204
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
usb 3-9: new high-speed USB device number 2 using xhci_hcd
ppdev: user-space parallel port driver
usb 3-9: New USB device found, idVendor=045b, idProduct=0209
usb 3-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 4 ports detected
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: irq 50 for MSI/MSI-X
mei_me 0000:00:16.0: version message write failed: ret = -5
mei_me 0000:00:16.0: hbm_start failed ret = -5
mei_me 0000:00:16.0: reset failed
mei_me 0000:00:16.0: link layer initialization failed.
mei_me 0000:00:16.0: init hw failure.
mei_me 0000:00:16.0: initialization failed.
ACPI Warning: 0x00001828-0x0000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00001c30-0x00001c3f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x00001c30-0x00001c3f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00001c00-0x00001c2f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x00001c00-0x00001c2f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
[drm] Initialized drm 1.1.0 20060810
type=1400 audit(1430590896.393:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=513 comm="apparmor_parser"
type=1400 audit(1430590896.393:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=513 comm="apparmor_parser"
type=1400 audit(1430590896.393:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=513 comm="apparmor_parser"
type=1400 audit(1430590896.393:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=508 comm="apparmor_parser"
type=1400 audit(1430590896.393:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=508 comm="apparmor_parser"
type=1400 audit(1430590896.393:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=508 comm="apparmor_parser"
type=1400 audit(1430590896.393:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=513 comm="apparmor_parser"
type=1400 audit(1430590896.393:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=513 comm="apparmor_parser"
type=1400 audit(1430590896.393:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=508 comm="apparmor_parser"
random: nonblocking pool is initialized
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
SKU: Nid=0x1d sku_cfg=0x4045e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
dig-in=0x1f
realtek: No valid SSID, checking pincfg 0x4045e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0899
[drm] radeon kernel modesetting enabled.
checking generic (e0000000 e10000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
usb 3-10: new high-speed USB device number 3 using xhci_hcd
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
usb 3-10: New USB device found, idVendor=045b, idProduct=0209
usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-10:1.0: USB hub found
hub 3-10:1.0: 4 ports detected
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
usb 3-9.3: new high-speed USB device number 4 using xhci_hcd
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (TAHITI 0x1002:0x6798 0x1043:0x0448).
[drm] register mmio base: 0xF7E00000
[drm] register mmio size: 262144
ATOM BIOS: 6798.15.23.0.2.AS01.U2
radeon 0000:01:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used)
radeon 0000:01:00.0: GTT: 1024M 0x00000000C0000000 - 0x00000000FFFFFFFF
[drm] Detected VRAM RAM=3072M, BAR=256M
[drm] RAM width 384bits DDR
[TTM] Zone kernel: Available graphics memory: 365914 kiB
[TTM] Zone highmem: Available graphics memory: 8268144 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 3072M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading TAHITI Microcode
[drm] radeon/TAHITI_mc2.bin: 31232 bytes
usb 3-9.3: New USB device found, idVendor=0424, idProduct=2514
usb 3-9.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-9.3:1.0: USB hub found
hub 3-9.3:1.0: 3 ports detected
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
[drm] PCIE gen 3 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0xffdb5c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0xffdb5c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0xffdb5c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0xffdb5c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0xffdb5c10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xfa235a18
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: irq 51 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 2 usecs
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
usb 3-10.3: new full-speed USB device number 5 using xhci_hcd
Switched to clocksource tsc
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] Enabling audio 1 support
[drm] Enabling audio 2 support
[drm] Enabling audio 3 support
[drm] Enabling audio 4 support
[drm] Enabling audio 5 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
usb 3-10.3: New USB device found, idVendor=046d, idProduct=c52b
usb 3-10.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-10.3: Product: USB Receiver
usb 3-10.3: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-10.3/input2
usb 3-10.4: new high-speed USB device number 6 using xhci_hcd
usb 3-10.4: New USB device found, idVendor=07ab, idProduct=fc05
usb 3-10.4: New USB device strings: Mfr=56, Product=77, SerialNumber=99
usb 3-10.4: Product: Classic SL Hard Drive
usb 3-10.4: Manufacturer: Freecom Technologies
usb 3-10.4: SerialNumber: DEF10A00FBCE
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
init: cups main process (895) killed by HUP signal
init: cups main process ended, respawning
usb-storage 3-10.4:1.0: USB Mass Storage device detected
scsi14 : usb-storage 3-10.4:1.0
usbcore: registered new interface driver usb-storage
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD6
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DP-2
[drm] HPD1
[drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm] DP-3
[drm] HPD5
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY2
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD4
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY2
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 4:
[drm] DVI-D-1
[drm] HPD3
[drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[drm] Encoders:
[drm] DFP5: INTERNAL_UNIPHY
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
usb 3-9.3.1: new high-speed USB device number 7 using xhci_hcd
usb 3-9.3.1: New USB device found, idVendor=0424, idProduct=2640
usb 3-9.3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-9.3.1:1.0: USB hub found
hub 3-9.3.1:1.0: 3 ports detected
usb 3-9.3.1.1: new high-speed USB device number 8 using xhci_hcd
usb 3-9.3.1.1: New USB device found, idVendor=0424, idProduct=4063
usb 3-9.3.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9.3.1.1: Product: Ultra Fast Media Reader
usb 3-9.3.1.1: Manufacturer: Generic
usb 3-9.3.1.1: SerialNumber: 000000264001
usb-storage 3-9.3.1.1:1.0: USB Mass Storage device detected
scsi15 : usb-storage 3-9.3.1.1:1.0
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
scsi 14:0:0:0: Direct-Access HDS72808 0PLAT20 PQ: 0 ANSI: 0
sd 14:0:0:0: Attached scsi generic sg3 type 0
sd 14:0:0:0: [sdc] 160836480 512-byte logical blocks: (82.3 GB/76.6 GiB)
sd 14:0:0:0: [sdc] Write Protect is off
sd 14:0:0:0: [sdc] Mode Sense: 33 00 00 00
sd 14:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 14:0:0:0: [sdc] Attached SCSI disk
[drm] radeon: dpm initialized
e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth1: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[drm] fb mappable at 0xE1480000
[drm] vram apper at 0xE0000000
[drm] size 14745600
[drm] fb depth is 24
[drm] pitch is 10240
fbcon: radeondrmfb (fb0) is primary device
scsi 15:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.91 PQ: 0 ANSI: 0
sd 15:0:0:0: Attached scsi generic sg4 type 0
sd 15:0:0:0: [sdd] Attached SCSI removable disk
Console: switching to colour frame buffer device 320x90
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Using LPIB position fix
hda-intel 0000:01:00.1: Force to non-snoop mode
snd_hda_intel 0000:01:00.1: irq 52 for MSI/MSI-X
hda-intel 0000:01:00.1: Enable sync_write for stable communication
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
init: failsafe main process (830) killed by TERM signal
audit_printk_skb: 18 callbacks suppressed
type=1400 audit(1430590901.183:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1251 comm="apparmor_parser"
type=1400 audit(1430590901.183:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1251 comm="apparmor_parser"
type=1400 audit(1430590901.183:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1251 comm="apparmor_parser"
type=1400 audit(1430590901.183:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1251 comm="apparmor_parser"
type=1400 audit(1430590901.183:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1251 comm="apparmor_parser"
type=1400 audit(1430590901.183:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1251 comm="apparmor_parser"
type=1400 audit(1430590901.187:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1257 comm="apparmor_parser"
type=1400 audit(1430590901.187:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1257 comm="apparmor_parser"
type=1400 audit(1430590901.187:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1257 comm="apparmor_parser"
type=1400 audit(1430590901.187:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/libvirt/virt-aa-helper" pid=1254 comm="apparmor_parser"
Ebtables v2.0 registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
Bridge firewalling registered
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1760) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
cgroup: systemd-logind (889) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: "memory" requires setting use_hierarchy to 1 on the root.
init: plymouth-stop pre-start process (1827) terminated with status 1
input: Logitech Unifying Device. Wireless PID:1024 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3/3-10.3:1.2/0003:046D:C52B.0003/input/input19
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1024] on usb-0000:00:14.0-10.3:1
input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3/3-10.3:1.2/0003:046D:C52B.0003/input/input20
logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:14.0-10.3:2
input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3/3-10.3:1.2/0003:046D:C52B.0003/input/input21
logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:14.0-10.3:3
audit_printk_skb: 135 callbacks suppressed
type=1400 audit(1430590926.596:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2348 comm="apparmor_parser"
type=1400 audit(1430590926.596:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2348 comm="apparmor_parser"
type=1400 audit(1430590926.596:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2348 comm="apparmor_parser"
systemd-hostnamed[4358]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 3-9.3: USB disconnect, device number 4
usb 3-9.3.1: USB disconnect, device number 7
usb 3-9.3.1.1: USB disconnect, device number 8
usb 3-9.3: new high-speed USB device number 9 using xhci_hcd
usb 3-9.3: New USB device found, idVendor=0424, idProduct=2514
usb 3-9.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-9.3:1.0: USB hub found
hub 3-9.3:1.0: 3 ports detected
usb 3-9.3.1: new high-speed USB device number 10 using xhci_hcd
usb 3-9.3.1: New USB device found, idVendor=0424, idProduct=2640
usb 3-9.3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-9.3.1:1.0: USB hub found
hub 3-9.3.1:1.0: 3 ports detected
usb 3-9.3.1.1: new high-speed USB device number 11 using xhci_hcd
usb 3-9.3.1.1: New USB device found, idVendor=0424, idProduct=4063
usb 3-9.3.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9.3.1.1: Product: Ultra Fast Media Reader
usb 3-9.3.1.1: Manufacturer: Generic
usb 3-9.3.1.1: SerialNumber: 000000264001
usb-storage 3-9.3.1.1:1.0: USB Mass Storage device detected
scsi16 : usb-storage 3-9.3.1.1:1.0
scsi 16:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.91 PQ: 0 ANSI: 0
sd 16:0:0:0: Attached scsi generic sg4 type 0
sd 16:0:0:0: [sdd] Attached SCSI removable disk
systemd-udevd[19373]: inotify_add_watch(6, /dev/sdd, 10) failed: No space left on device
systemd-udevd[19373]: inotify_add_watch(6, /dev/sdd, 10) failed: No space left on device
usb 3-9.3: USB disconnect, device number 9
usb 3-9.3.1: USB disconnect, device number 10
usb 3-9.3.1.1: USB disconnect, device number 11
usb 3-9.3: new high-speed USB device number 12 using xhci_hcd
usb 3-9.3: New USB device found, idVendor=0424, idProduct=2514
usb 3-9.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-9.3:1.0: USB hub found
hub 3-9.3:1.0: 3 ports detected
usb 3-9.3.1: new high-speed USB device number 13 using xhci_hcd
usb 3-9.3.1: New USB device found, idVendor=0424, idProduct=2640
usb 3-9.3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-9.3.1:1.0: USB hub found
hub 3-9.3.1:1.0: 3 ports detected
usb 3-9.3.1.1: new high-speed USB device number 14 using xhci_hcd
usb 3-9.3.1.1: New USB device found, idVendor=0424, idProduct=4063
usb 3-9.3.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9.3.1.1: Product: Ultra Fast Media Reader
usb 3-9.3.1.1: Manufacturer: Generic
usb 3-9.3.1.1: SerialNumber: 000000264001
usb-storage 3-9.3.1.1:1.0: USB Mass Storage device detected
scsi17 : usb-storage 3-9.3.1.1:1.0
scsi 17:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.91 PQ: 0 ANSI: 0
sd 17:0:0:0: Attached scsi generic sg4 type 0
sd 17:0:0:0: [sdd] Attached SCSI removable disk
systemd-udevd[19592]: inotify_add_watch(6, /dev/sdd, 10) failed: No space left on device
systemd-udevd[19592]: inotify_add_watch(6, /dev/sdd, 10) failed: No space left on device