dmesg - iotest
Reserving virtual address space above 0xff800000
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-49-generic (buildd@toyol) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #81-Ubuntu SMP Tue Mar 24 19:29:15 UTC 2015 (Ubuntu 3.13.0-49.81-generic 3.13.11-ckt17)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
Freeing 9d-100 pfn range: 99 pages freed
1-1 mapping on 9d->100
Freeing 20000-20200 pfn range: 512 pages freed
1-1 mapping on 20000->20200
Freeing 40004-40005 pfn range: 1 pages freed
1-1 mapping on 40004->40005
1-1 mapping on 72fe5->73d66
1-1 mapping on 73db0->751b0
1-1 mapping on 79abf->79fff
1-1 mapping on 7a000->100000
Released 612 pages of unused memory
Set 559397 page(s) to 1-1 mapping
Populating 6e973-6ebd7 pfn range: 612 pages added
e820: BIOS-provided physical RAM map:
Xen: [mem 0x0000000000000000-0x000000000009cfff] usable
Xen: [mem 0x000000000009d400-0x00000000000fffff] reserved
Xen: [mem 0x0000000000100000-0x000000001fffffff] usable
Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved
Xen: [mem 0x0000000020200000-0x0000000040003fff] usable
Xen: [mem 0x0000000040004000-0x0000000040004fff] reserved
Xen: [mem 0x0000000040005000-0x0000000072fe4fff] usable
Xen: [mem 0x0000000072fe5000-0x0000000073d65fff] reserved
Xen: [mem 0x0000000073d66000-0x0000000073daffff] usable
Xen: [mem 0x0000000073db0000-0x00000000751affff] reserved
Xen: [mem 0x00000000751b0000-0x0000000079abefff] usable
Xen: [mem 0x0000000079abf000-0x0000000079ebefff] reserved
Xen: [mem 0x0000000079ebf000-0x0000000079fbefff] ACPI NVS
Xen: [mem 0x0000000079fbf000-0x0000000079ffefff] ACPI data
Xen: [mem 0x0000000079fff000-0x0000000079ffffff] usable
Xen: [mem 0x000000007a000000-0x000000007e9fffff] reserved
Xen: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
Xen: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Xen: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
Xen: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
Xen: [mem 0x0000000100000000-0x00000001005fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 20195/INVALID, BIOS 6DCN97WW(V8.10) 09/23/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x100600 max_arch_pfn = 0x1000000
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x03bfefff]
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37000000-0x371fffff]
[mem 0x37000000-0x371fffff] page 4k
BRK [0x01b9f000, 0x01b9ffff] PGTABLE
init_memory_mapping: [mem 0x34000000-0x36ffffff]
[mem 0x34000000-0x36ffffff] page 4k
BRK [0x01ba0000, 0x01ba0fff] PGTABLE
BRK [0x01ba1000, 0x01ba1fff] PGTABLE
BRK [0x01ba2000, 0x01ba2fff] PGTABLE
BRK [0x01ba3000, 0x01ba3fff] PGTABLE
BRK [0x01ba4000, 0x01ba4fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x1fffffff] page 4k
init_memory_mapping: [mem 0x20200000-0x33ffffff]
[mem 0x20200000-0x33ffffff] page 4k
init_memory_mapping: [mem 0x37200000-0x373fdfff]
[mem 0x37200000-0x373fdfff] page 4k
RAMDISK: [mem 0x01deb000-0x03094fff]
ACPI: RSDP 000fe020 000024 (v02 LENOVO)
ACPI: XSDT 79ffe210 00009C (v01 LENOVO CB-01 00000001 01000013)
ACPI: FACP 79ffa000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DSDT 79fec000 00A524 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FACS 79fbb000 000040
ACPI: SLIC 79ffd000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: UEFI 79ffc000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASF! 79ffb000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: HPET 79ff9000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: APIC 79ff8000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: MCFG 79ff7000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 79feb000 0006FE (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: BOOT 79fe9000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASPT 79fe7000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DBGP 79fe6000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FPDT 79fe4000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 79fe2000 0008E4 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 79fe1000 000A92 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 79fde000 001F61 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
3218MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 0 - 373fe000
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x373fdfff]
HighMem [mem 0x373fe000-0x005fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x40003fff]
node 0: [mem 0x40005000-0x72fe4fff]
node 0: [mem 0x73d66000-0x73daffff]
node 0: [mem 0x751b0000-0x79abefff]
node 0: [mem 0x79fff000-0x79ffffff]
node 0: [mem 0x00000000-0x005fffff]
On node 0 totalpages: 490714
free_area_init_node: node 0, pgdat c199f740, node_mem_map f505b020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3996 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 221694 pages, LIFO batch:31
HighMem zone: 6437 pages used for memmap
HighMem zone: 265024 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0 already used, trying 4
IOAPIC[0]: Unable to change apic_id!
IOAPIC[0]: apic_id 255, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
e820: [mem 0x7ea00000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on Xen
Xen version: 4.4.1 (preserve-AD)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f737a000 s36160 r0 d21184 u57344
pcpu-alloc: s36160 r0 d21184 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
xen: PV spinlocks enabled
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 488946
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
xsave: enabled xstate_bv 0x7, cntxt size 0x340
allocated 8400888 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
software IO TLB [mem 0x30858000-0x34858000] (64MB) mapped at [f0858000-f4857fff]
Initializing HighMem for node 0 (000373fe:00100600)
Memory: 1668984K/1962856K available (6551K kernel code, 641K rwdata, 2768K rodata, 880K init, 924K bss, 293872K reserved, 909152K highmem)
virtual kernel memory layout:
fixmap : 0xff714000 - 0xff7ff000 ( 940 kB)
pkmap : 0xff400000 - 0xff600000 (2048 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc19bd000 - 0xc1a99000 ( 880 kB)
.data : 0xc1665f74 - 0xc19bc5c0 (3417 kB)
.text : 0xc1000000 - 0xc1665f74 (6551 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f0410000 soft=f0412000
xen: sci override: global_irq=9 trigger=0 polarity=0
xen: registering gsi 9 triggering 0 polarity 0
xen: --> pirq=9 -> irq=9 (gsi=9)
xen: acpi sci 9
xen: --> pirq=1 -> irq=1 (gsi=1)
xen: --> pirq=2 -> irq=2 (gsi=2)
xen: --> pirq=3 -> irq=3 (gsi=3)
xen: --> pirq=4 -> irq=4 (gsi=4)
xen: --> pirq=5 -> irq=5 (gsi=5)
xen: --> pirq=6 -> irq=6 (gsi=6)
xen: --> pirq=7 -> irq=7 (gsi=7)
xen: --> pirq=8 -> irq=8 (gsi=8)
xen: --> pirq=10 -> irq=10 (gsi=10)
xen: --> pirq=11 -> irq=11 (gsi=11)
xen: --> pirq=12 -> irq=12 (gsi=12)
xen: --> pirq=13 -> irq=13 (gsi=13)
xen: --> pirq=14 -> irq=14 (gsi=14)
xen: --> pirq=15 -> irq=15 (gsi=15)
Console: colour VGA+ 80x25
console [tty0] enabled
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
tsc: Detected 1795.978 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.95 BogoMIPS (lpj=7183912)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 2 MCE banks
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 2
Freeing SMP alternatives memory: 32K (c1a99000 - c1aa1000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27857 entries in 55 pages
cpu 0 spinlock event irq 41
Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
NMI watchdog: disabled (cpu0): hardware events not enabled
CPU 1 irqstacks, hard=f0524000 soft=f0526000
installing Xen timer for CPU 1
cpu 1 spinlock event irq 48
Initializing CPU#1
CPU 2 irqstacks, hard=f0542000 soft=f0544000
installing Xen timer for CPU 2
cpu 2 spinlock event irq 55
Initializing CPU#2
CPU 3 irqstacks, hard=f0568000 soft=f056a000
installing Xen timer for CPU 3
cpu 3 spinlock event irq 62
Initializing CPU#3
x86: Booted up 1 node, 4 CPUs
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x79ebf000-0x79fbefff] (1048576 bytes)
pinctrl core: initialized pinctrl subsystem
xen:grant_table: Grant tables using version 2 layout
Grant table initialized
regulator-dummy: no parameters
RTC time: 18:38:20, date: 04/20/15
NET: Registered protocol family 16
EISA bus registered
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 79bf5018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
ACPI: SSDT 79bf6a98 000303 (v01 PmRef ApIst 00003000 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20121220)
ACPI: SSDT 79bf4d98 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x7ea00000-0xfeafffff]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xa0700000-0xa070ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xa0714000-0xa071400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xa0719000-0xa07193ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xa0710000-0xa0713fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xa0718000-0xa07183ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
pci 0000:00:1f.2: reg 0x24: [mem 0xa0717000-0xa07177ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xa0715000-0xa07150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
pci 0000:01:00.0: [1002:6760] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xa0600000-0xa061ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xa0600000-0xa06fffff]
pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
pci 0000:02:00.0: reg 0x18: [mem 0xa0404000-0xa0404fff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xa0400000-0xa0403fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xa0400000-0xa04fffff 64bit pref]
pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xa0500000-0xa057ffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xa0500000-0xa05fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
xen:balloon: Initialising balloon driver
xen_balloon: Initialising balloon driver
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0x72fe5000-0x73ffffff]
e820: reserve RAM buffer [mem 0x73db0000-0x73ffffff]
e820: reserve RAM buffer [mem 0x79abf000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
e820: reserve RAM buffer [mem 0x100600000-0x103ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to clocksource xen
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
xen: registering gsi 13 triggering 1 polarity 0
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1100-0x110f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] could not be reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: [io 0xfd60-0xfd63] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
xen: registering gsi 8 triggering 1 polarity 0
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
xen: registering gsi 1 triggering 1 polarity 0
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
xen: registering gsi 12 triggering 1 polarity 0
pnp 00:08: Plug and Play ACPI device, IDs SYN2b04 SYN2b00 SYN0002 PNP0f13 (active)
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:09: [mem 0xff000000-0xff000fff] has been reserved
system 00:09: [mem 0xff010000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:09: [mem 0x7ea00000-0x7ea00fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled
PM-Timer failed consistency check (0xffffff) - aborting.
pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0x7eb00000-0x7ebfffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xa0620000-0xa063ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xa0600000-0xa06fffff]
pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xa0400000-0xa04fffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0x7eb00000-0x7eb0ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xa0500000-0xa05fffff]
pci 0000:00:1c.1: bridge window [mem 0x7eb00000-0x7ebfffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x7ea00000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xa0600000-0xa06fffff]
pci_bus 0000:01: resource 2 [mem 0x80000000-0x8fffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 2 [mem 0xa0400000-0xa04fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xa0500000-0xa05fffff]
pci_bus 0000:03: resource 2 [mem 0x7eb00000-0x7ebfffff pref]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
xen: registering gsi 21 triggering 0 polarity 1
xen: --> pirq=21 -> irq=21 (gsi=21)
xen: registering gsi 16 triggering 0 polarity 1
xen: --> pirq=16 -> irq=16 (gsi=16)
pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
xen: registering gsi 23 triggering 0 polarity 1
xen: --> pirq=23 -> irq=23 (gsi=23)
pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19112K (c1deb000 - c3095000)
Simple Boot Flag at 0x44 set to 0x1
microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1429555104.984:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1521
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
xen: registering gsi 17 triggering 0 polarity 1
xen: --> pirq=17 -> irq=17 (gsi=17)
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
intel_idle: intel_idle yielding to none
ipmi message handler version 39.2
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ACAD] (off-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Warning: Processor Platform Limit not supported.
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (44 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
xen_acpi_processor: Uploading Xen processor PM info
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery present)
hpet_acpi_add: no address or irqs in _CRS
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xen_netfront: Initialising Xen virtual ethernet driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xa0719000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-49-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xen: registering gsi 23 triggering 0 polarity 1
Already setup the GSI :23
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xa0718000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-49-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xen: registering gsi 21 triggering 0 polarity 1
Already setup the GSI :21
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-49-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-49-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
isapnp: No Plug & Play device found
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: ed1ab58bc04668a88959b0bd09ae8b94c1fa0f45'
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Key type trusted registered
usb 1-1: new high-speed USB device number 2 using ehci-pci
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 11:979:645
rtc_cmos 00:05: setting system clock to 2015-04-20 18:38:25 UTC (1429555105)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 880K (c19bd000 - c1a99000)
Write protecting the kernel text: 6552k
Write protecting the kernel read-only data: 2776k
NX-protecting the kernel data: 5736k
systemd-udevd[112]: starting version 204
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
r8169 0000:02:00.0 eth0: RTL8105e at 0xf7c20000, 20:1a:06:7d:66:ac, XID 00c00000 IRQ 73
ahci 0000:00:1f.2: version 3.0
xen: registering gsi 19 triggering 0 polarity 1
xen: --> pirq=19 -> irq=19 (gsi=19)
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x2 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xa0717000 port 0xa0717180 irq 74
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: WDC WD5000LPVT-24G33T1, 02.01A02, max UDMA/133
ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD5000LPVT-2 02.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 3-3: new full-speed USB device number 2 using xhci_hcd
usb 3-3: New USB device found, idVendor=0cf3, idProduct=3004
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3: Product: Bluetooth USB Host Controller
usb 3-3: Manufacturer: Atheros Communications
usb 3-3: SerialNumber: Alaska Day 2006
sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3 sda4
sd 1:0:0:0: [sda] Attached SCSI disk
usb 1-1.3: new high-speed USB device number 3 using ehci-pci
usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0129
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: USB2.0-CRW
usb 1-1.3: Manufacturer: Generic
usb 1-1.3: SerialNumber: 20100201396000000
usb 1-1.4: new high-speed USB device number 4 using ehci-pci
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x127c00, board id: 2133, fw id: 1468684
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
usb 1-1.4: New USB device found, idVendor=13d3, idProduct=5721
usb 1-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-1.4: Product: Lenovo EasyCamera
usb 1-1.4: Manufacturer: Azurewave
usb 1-1.4: SerialNumber: NULL
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
init: plymouth-upstart-bridge main process (181) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (192) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (194) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (195) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 1952764k swap on /dev/sda4. Priority:-1 extents:1 across:1952764k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[342]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
parport_pc parport_pc.956: Unable to set coherent dma mask: disabling DMA
parport_pc parport_pc.888: Unable to set coherent dma mask: disabling DMA
parport_pc parport_pc.632: Unable to set coherent dma mask: disabling DMA
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
[drm] Initialized drm 1.1.0 20060810
input: Ideapad extra buttons as /devices/platform/VPC2004:00/input/input6
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
[drm] Memory usable by graphics device = 2048M
Failed to add WC MTRR for [90000000-9fffffff]; performance may suffer.
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
cfg80211: Calling CRDA to update world regulatory domain
[drm] radeon kernel modesetting enabled.
VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
radeon 0000:01:00.0: enabling device (0000 -> 0003)
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
[drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
xen: registering gsi 17 triggering 0 polarity 1
Already setup the GSI :17
ath: phy0: Set BT/WLAN RX diversity capability
type=1400 audit(1429555121.025:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=410 comm="apparmor_parser"
type=1400 audit(1429555121.025:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=410 comm="apparmor_parser"
type=1400 audit(1429555121.025:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=410 comm="apparmor_parser"
type=1400 audit(1429555121.029:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=410 comm="apparmor_parser"
type=1400 audit(1429555121.029:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=410 comm="apparmor_parser"
type=1400 audit(1429555121.029:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=410 comm="apparmor_parser"
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xf8680000, irq=17
Linux video capture interface: v2.00
rts5139: module is from the staging directory, the quality is unknown, you have been warned.
usbcore: registered new interface driver ath3k
usb 3-3: USB disconnect, device number 2
scsi6 : SCSI emulation for RTS5139 USB card reader
scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
intel_rapl: domain uncore energy ctr 6737:6737 not working, skip
sd 6:0:0:0: Attached scsi generic sg1 type 0
usbcore: registered new interface driver rts5139
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (13d3:5721)
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
sd 6:0:0:0: [sdb] Attached SCSI removable disk
fbcon: inteldrmfb (fb0) is primary device
usb 3-3: new full-speed USB device number 3 using xhci_hcd
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
acpi device:3a: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:38/LNXVIDEO:00/input/input8
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:47: registered as cooling_device6
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x17AA:0x3977).
[drm] register mmio base: 0xA0600000
[drm] register mmio size: 131072
vga_switcheroo: enabled
ATPX version 1, functions 0x00000033
ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
xen: registering gsi 22 triggering 0 polarity 1
xen: --> pirq=22 -> irq=22 (gsi=22)
SKU: Nid=0x1d sku_cfg=0x4015812d
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000005
SKU: customization=0x00000081
SKU: external_amp=0x5
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0x18
Internal Mic=0x12
realtek: No valid SSID, checking pincfg 0x4015812d for NID 0x1d
realtek: Enabling init ASM_ID=0x812d CODEC_ID=10ec0269
[drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1429555123.865:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=779 comm="apparmor_parser"
type=1400 audit(1429555123.865:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=779 comm="apparmor_parser"
type=1400 audit(1429555123.865:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=779 comm="apparmor_parser"
init: cups main process (780) killed by HUP signal
init: cups main process ended, respawning
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
xhci_hcd 0000:00:14.0: Timeout while waiting for address device command
usb 3-3: Device not responding to set address.
usb 3-3: device not accepting address 3, error -71
ATOM BIOS: Lenovo
usb 3-3: new full-speed USB device number 4 using xhci_hcd
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
Failed to add WC MTRR for [80000000-8fffffff]; performance may suffer.
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 389928 kiB
[TTM] Zone highmem: Available graphics memory: 844504 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading CAICOS Microcode
usb 3-3: New USB device found, idVendor=0cf3, idProduct=3004
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3: Product: Bluetooth USB Host Controller
usb 3-3: Manufacturer: Atheros Communications
usb 3-3: SerialNumber: Alaska Day 2006
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xe5c32c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xe5c32c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf9032118
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 9 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Internal thermal controller with fan control
[drm] radeon: dpm initialized
radeon 0000:01:00.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
[drm] fb mappable at 0x80474000
[drm] vram apper at 0x80000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 1
Bridge firewalling registered
device eth0 entered promiscuous mode
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready
[drm] Disabling audio 0 support
type=1400 audit(1429555154.233:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1876 comm="apparmor_parser"
type=1400 audit(1429555154.233:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1876 comm="apparmor_parser"
type=1400 audit(1429555154.233:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1876 comm="apparmor_parser"
type=1400 audit(1429555154.801:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1908 comm="apparmor_parser"
r8169 0000:02:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
xenbr0: port 1(eth0) entered forwarding state
xenbr0: port 1(eth0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready
init: failsafe main process (721) killed by TERM signal
type=1400 audit(1429555179.813:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=2512 comm="apparmor_parser"
type=1400 audit(1429555179.813:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2512 comm="apparmor_parser"
type=1400 audit(1429555179.813:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2512 comm="apparmor_parser"
type=1400 audit(1429555179.817:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2512 comm="apparmor_parser"
type=1400 audit(1429555179.817:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2512 comm="apparmor_parser"
type=1400 audit(1429555179.817:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2512 comm="apparmor_parser"
type=1400 audit(1429555179.817:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=2511 comm="apparmor_parser"
type=1400 audit(1429555179.817:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=2511 comm="apparmor_parser"
type=1400 audit(1429555179.817:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=2511 comm="apparmor_parser"
type=1400 audit(1429555179.825:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/libvirt/virt-aa-helper" pid=2515 comm="apparmor_parser"
init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
xen:xen_evtchn: Event-channel device installed
Ebtables v2.0 registered
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
xenbr0: port 1(eth0) entered forwarding state
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xe5c32c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xe5c32c0c
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf9032118
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 9 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (3471) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
cgroup: systemd-logind (789) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: "memory" requires setting use_hierarchy to 1 on the root.
[drm] Disabling audio 0 support
init: anacron main process (2656) killed by TERM signal
systemd-hostnamed[6422]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[32459]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 1-1.1: new low-speed USB device number 5 using ehci-pci
usb 1-1.1: New USB device found, idVendor=0000, idProduct=0538
usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.1: Product: USB OPTICAL MOUSE
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input13
hid-generic 0003:0000:0538.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.1/input0
systemd-hostnamed[3616]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!