dmesg - xrender_vidyut_boss
Booting Linux on physical CPU 0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.5 (srikant@gnu-linux-org) (gcc version 4.5.2 (Sourcery G++ Lite 2011.03-41) ) #85 SMP PREEMPT Fri Jan 30 20:34:07 IST 2015
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: WMT
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 229888
free_area_init_node: node 0, pgdat c09e5ec0, node_mem_map c0b16000
Normal zone: 1520 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 193040 pages, LIFO batch:31
HighMem zone: 276 pages used for memmap
HighMem zone: 35052 pages, LIFO batch:7
PERCPU: Embedded 7 pages/cpu @c1226000 s8000 r8192 d12480 u32768
pcpu-alloc: s8000 r8192 d12480 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 228092
Kernel command line: elevator=noop mem=898M initrd=0x02000000,0x894379 ubi.mtd=5 root=ubi0_0 rw rootfstype=ubifs console=ttyS0,115200n8
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 1839104 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 898MB = 898MB total
Memory: 889532k/889532k available, 30020k reserved, 141312K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0948000 (9472 kB)
.init : 0xc0948000 - 0xc0982f40 ( 236 kB)
.data : 0xc0984000 - 0xc09e8e58 ( 404 kB)
.bss : 0xc09e8e7c - 0xc0b1516c (1201 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:192
wmt_sfc_init id0 is a13113, id1 is ffffff
un-know id0 = 0xa13113
sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms
Console: colour dummy device 80x30
console [ttyS0] enabled
Calibrating delay loop... 1578.52 BogoMIPS (lpj=2629632)
pid_max: default: 32768 minimum: 301
Security Framework initialized
wmt.selinux.param = 1
SELinux: Initializing.
SELinux: Starting in permissive mode
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x75d8d8 - 0x75d930
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU1: Unknown IPI message 0x1
Brought up 2 CPUs
SMP: Total of 2 processors activated (3156.04 BogoMIPS).
devtmpfs: initialized
dummy:
NET: Registered protocol family 16
gpiochip_add: registered GPIOs 0 to 158 on device: wmt-gpio
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x410000c9, AUX_CTRL 0x3e450000, Cache size: 524288 B
wmt_pci_init
PCI: WonderMidia Technology PCI Bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci 0000:00:01.0: [1106:1359] type 00 class 0x01018f
pci 0000:00:01.0: reg 10: [io 0xfe008100-0xfe008107]
pci 0000:00:01.0: reg 14: [io 0xfe008144-0xfe008147]
pci 0000:00:01.0: reg 20: [io 0xfe008180-0xfe00818f]
pci 0000:00:02.0: [1106:3106] type 00 class 0x020000
pci 0000:00:02.0: reg 10: [io 0xfe004000-0xfe0040ff]
pci 0000:00:02.0: reg 14: [mem 0xd8004000-0xd80040ff]
pci 0000:00:04.0: [1106:3104] type 00 class 0x0c0320
pci 0000:00:04.0: reg 10: [mem 0xd8007900-0xd80079ff]
pci 0000:00:05.0: [1106:3038] type 00 class 0x0c0300
pci 0000:00:05.0: reg 20: [io 0xfe007b00-0xfe007b1f]
pci 0000:00:06.0: [1106:3038] type 00 class 0x0c0300
pci 0000:00:06.0: reg 20: [io 0xfe008d00-0xfe008d1f]
PCI: bus0: Fast back to back transfers disabled
bio: create slab at 0
VCC_1.8V_PDA: 1800 mV
V_BAT: 3700 mV
SCSI subsystem initialized
*** uhci_hcd_init usb_param[0] =1 ,usb_param[1]=70c000 ,usb_param[2]=44000000 ,usb_param[3]=0 ,usb_param[4]=600000, usb_param[5]=0, usb_param[6]=ef05bf5c
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PORT 0 speed_mode = 1
i2c: adding wmt_i2c_adapter.
register i2c0 syscore ops
i2c: successfully added bus
PORT 1 speed_mode = 1
i2c: adding wmt_i2c_adapter1.
i2c: successfully added bus
PORT 2 speed_mode = 1
i2c: adding wmt_i2c2_adapter.
i2c: successfully added bus
PORT 3 speed_mode = 1
pllb_freq = 19885714
i2c: adding wmt_i2c3_adapter.
i2c: successfully added bus
I2C4 turn off
Advanced Linux Sound Architecture Driver Version 1.0.25.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
[WMT-MB] Set MB total size 115712 KB
cfg80211: Calling CRDA to update world regulatory domain
[WMT-MB] Preparing VIDEO BUFFER (SIZE 115712 kB) ...
[WMT-MB] MB version: 1.0.0.3
[WMT-MB] MAX MB Area size: Max 4194304 Kb Min 256 Kb
[WMT-MB] prob /dev/Memory Block major 242, minor 0
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: enabling device 0000:00:04.0 (0040 -> 0042)
pci 0000:00:04.0: EHCI: unrecognized capability 00
PCI: enabling device 0000:00:05.0 (0000 -> 0001)
pci 0000:00:05.0: uhci_check_and_reset_hc: cmd = 0x0000
pci 0000:00:05.0: Performing full reset
PCI: enabling device 0000:00:06.0 (0000 -> 0001)
pci 0000:00:06.0: uhci_check_and_reset_hc: cmd = 0x0000
pci 0000:00:06.0: Performing full reset
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 8784K
mmfreq disable
have not set wmt.gpo.printer
Can not find uboot env wmt.cpuidle.param
wmt_cpuidle check env failed!
audit: initializing netlink socket (disabled)
type=2000 audit(946685162.223:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.30 [Flags: R/W].
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.18)
yaffs: yaffs built Jan 30 2015 20:08:34 Installing.
msgmni has been set to 1478
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered (default)
io scheduler deadline registered
io scheduler cfq registered
backlight param: pwm0(4kHz), invert 1, brightness 180(0~256)
gpio11 (active 1)
backlight delay: 0ms
[ssd2828] lcd for ssd2828 not found
lcd power: gpio-0, active 1
maligp: version = 0x0b070101
malipp: version = 0xcd070101
Please add 'mbsize=113M' in bootargs![VPP] HDMI video mode 0
mb colfmt : 0x20,ARGB
display dual : 1
[VPP] govrh preinit 1
ACR TV Name:
TCL,RTD2662
boot parm vo 2 opt 0,24, 1024x600@60
boot parm vo 4 opt 0,24, 1280x720@60
[HDMI] HDMI plugout,hotplug 0
[VOUT] info 0,mask 0x2,GOVRH2,1024x600@61
[VOUT] info 1,mask 0x1,GOVRH,1280x720@60
preinit not match (1024x600) --> (1280x720)
Detected RAM size 1024 MB
gefb: phys 0x38300000, virt 0xf9000000, total 12288 KB
hdmi config (1024x600@60)
{vpp_pan_display,1923} uboot copy fb0
hdmi config (1024x600@60)
Console: switching to colour frame buffer device 128x37
[WMT-MB *W*] mb_find_mb fail. unknow type 1 addr (null)
[WMT-MB *W*] VPP-MB do phys to virt fail. addr 0 not found
wmtfb: framebuffer at 0x0, mapped to 0xc0000000, using 0, total 0
hdmi config (1024x600@60)
fb1: wmtfb frame buffer device
No upi pmic
GMT2214_PMIC_INIT
wmt_corepower: 1000 1400 mV at 1400 mV normal standby
wmt_vdd: 1000 1400 mV at 1250 mV normal standby
ldo2: 1050 1500 mV normal standby
ldo3: 1050 1500 mV normal standby
ldo4: 1050 1500 mV normal standby
ldo5: 1500 3300 mV normal standby
ldo6: 1500 3300 mV normal standby
GMT PMIC ver:0x1
gmt-pmic gmt-pmic: GMT regulator driver loaded
uart.0: ttyS0 at MMIO 0xfe200000 (irq = 64) is a wmt serial
uart.1: ttyS1 at MMIO 0xfe2b0000 (irq = 65) is a wmt serial
uart.2: ttyS2 at MMIO 0xfe210000 (irq = 79) is a wmt serial
uart.3: ttyS3 at MMIO 0xfe2c0000 (irq = 82) is a wmt serial
WMT Serial driver initialized: ok
RocketPort device driver module, version 2.09, 12-June-2003
init_r_port 895
init_r_port 895
init_r_port 895
init_r_port 895
Enter pwm_init
wmt.gpo.vibrator isn't set in u-boot env! -> Use default
Wrong vabrating u-boot parameter!
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
nbd: registered device at major 43
Warnning:viatel gpio not set.