dmesg - gl2_2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-80-generic (buildd@batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #116-Ubuntu SMP Mon Mar 23 17:11:03 UTC 2015 (Ubuntu 3.2.0-80.116-generic 3.2.68)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000effff000 (usable)
BIOS-e820: 00000000effff000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fc001000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000010f000000 (usable)
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Xen HVM domU/HVM domU, BIOS 4.1.3-rc1-pre-xc 07/16/2013
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x10f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 0F0000000 mask FF8000000 uncachable
1 base 0F8000000 mask FFC000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xeffff max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000fd9f0] fd9f0
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
init_memory_mapping: 0000000000000000-00000000effff000
0000000000 - 00efe00000 page 2M
00efe00000 - 00effff000 page 4k
kernel direct mapping tables up to effff000 @ 1fffa000-20000000
init_memory_mapping: 0000000100000000-000000010f000000
0100000000 - 010f000000 page 2M
kernel direct mapping tables up to 10f000000 @ efffd000-effff000
RAMDISK: 36496000 - 37243000
ACPI: RSDP 00000000000fdb10 00024 (v02 Xen)
ACPI: XSDT 00000000fc00e900 00044 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: FACP 00000000fc00e6c0 000F4 (v04 Xen HVM 00000000 HVML 00000000)
ACPI: DSDT 00000000fc001440 0D1F4 (v02 Xen HVM 00000000 INTL 20100528)
ACPI: FACS 00000000fc001400 00040
ACPI: APIC 00000000fc00e7c0 000D8 (v02 Xen HVM 00000000 HVML 00000000)
ACPI: HPET 00000000fc00e8a0 00038 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: WAET 00000000fc00e8d8 00028 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000010f000000
Initmem setup node 0 0000000000000000-000000010f000000
NODE_DATA [000000010effb000 - 000000010effffff]
[ffffea0000000000-ffffea00043fffff] PMD -> [ffff88010a600000-ffff88010e5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0010f000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000effff
0: 0x00100000 -> 0x0010f000
On node 0 totalpages: 1044366
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3914 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 962623 pages, LIFO batch:31
Normal zone: 960 pages used for memmap
Normal zone: 60480 pages, LIFO batch:15
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 15 CPUs, 11 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000effff000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fc001000
PM: Registered nosave memory: 00000000fc001000 - 0000000100000000
Allocating PCI resources starting at f0000000 (gap: f0000000:c001000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:15 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88010ec00000 s79104 r8192 d23296 u131072
pcpu-alloc: s79104 r8192 d23296 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 --
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027017
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4014400k/4440064k available (6600k kernel code, 262600k absent, 163064k reserved, 6606k data, 932k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=15, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:1208 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2118.331 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4236.66 BogoMIPS (lpj=8473324)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
ACPI: Core revision 20110623
ftrace: allocating 26627 entries in 105 pages
x2apic not enabled, IRQ remapping init failed
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Core(TM) i7-3612QE CPU @ 2.10GHz stepping 09
Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
NMI watchdog disabled (cpu0): hardware events not enabled
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 9a000
NMI watchdog disabled (cpu1): hardware events not enabled
#2
smpboot cpu 2: start_ip = 9a000
NMI watchdog disabled (cpu2): hardware events not enabled
#3
smpboot cpu 3: start_ip = 9a000
NMI watchdog disabled (cpu3): hardware events not enabled
Brought up 4 CPUs
Total of 4 processors activated (16837.75 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
print_constraints: dummy:
RTC time: 15:36:59, date: 04/16/15
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff]
pci 0000:00:00.0: [8086:0154] type 0 class 0x000600
pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
pci 0000:00:01.1: reg 20: [io 0xc700-0xc70f]
pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:02.0: [1234:1111] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf0ffffff pref]
pci 0000:00:03.0: [5853:0001] type 0 class 0x00ff80
pci 0000:00:03.0: reg 10: [io 0xc400-0xc4ff]
pci 0000:00:03.0: reg 14: [mem 0xf1000000-0xf1ffffff pref]
pci 0000:00:04.0: [5853:c110] type 0 class 0x000980
pci 0000:00:04.0: reg 10: [mem 0xf2000000-0xf2003fff]
pci 0000:00:05.0: [10ec:8139] type 0 class 0x000200
pci 0000:00:05.0: reg 10: [io 0xc500-0xc5ff]
pci 0000:00:05.0: reg 14: [mem 0xf2004000-0xf20040ff]
pci 0000:00:06.0: [8086:2415] type 0 class 0x000401
pci 0000:00:06.0: reg 10: [io 0xc000-0xc3ff]
pci 0000:00:06.0: reg 14: [io 0xc600-0xc6ff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f400 - 000000000009ffff
reserve RAM buffer: 00000000effff000 - 00000000efffffff
reserve RAM buffer: 000000010f000000 - 000000010fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 62.500000 MHz counter
Freeing initrd memory: 14004k freed
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x00000000-0x0009ffff]
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0000-0x0cf7 window]
pnp 00:01: [io 0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0xf0000000-0xfbffffff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:02: [io 0x10c0-0x1141]
pnp 00:02: [io 0xb044-0xb047]
system 00:02: [io 0x10c0-0x1141] has been reserved
system 00:02: [io 0xb044-0xb047] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x0010-0x001f]
pnp 00:04: [io 0x0022-0x002d]
pnp 00:04: [io 0x0030-0x003f]
pnp 00:04: [io 0x0044-0x005f]
pnp 00:04: [io 0x0062-0x0063]
pnp 00:04: [io 0x0065-0x006f]
pnp 00:04: [io 0x0072-0x007f]
pnp 00:04: [io 0x0080]
pnp 00:04: [io 0x0084-0x0086]
pnp 00:04: [io 0x0088]
pnp 00:04: [io 0x008c-0x008e]
pnp 00:04: [io 0x0090-0x009f]
pnp 00:04: [io 0x00a2-0x00bd]
pnp 00:04: [io 0x00e0-0x00ef]
pnp 00:04: [io 0x08a0-0x08a3]
pnp 00:04: [io 0x0cc0-0x0ccf]
pnp 00:04: [io 0x04d0-0x04d1]
system 00:04: [io 0x08a0-0x08a3] has been reserved
system 00:04: [io 0x0cc0-0x0ccf] has been reserved
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 4]
pnp 00:05: [io 0x0000-0x000f]
pnp 00:05: [io 0x0081-0x0083]
pnp 00:05: [io 0x0087]
pnp 00:05: [io 0x0089-0x008b]
pnp 00:05: [io 0x008f]
pnp 00:05: [io 0x00c0-0x00df]
pnp 00:05: [io 0x0480-0x048f]
pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:06: [io 0x0070-0x0071]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0061]
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:08: [irq 12]
pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:09: [io 0x0060]
pnp 00:09: [io 0x0064]
pnp 00:09: [irq 1]
pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0a: [io 0x03f0-0x03f5]
pnp 00:0a: [io 0x03f7]
pnp 00:0a: [irq 6]
pnp 00:0a: [dma 2]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:0b: [io 0x0378-0x037f]
pnp 00:0b: [irq 7]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 0 pci_try_num: 1
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800ebffd000 - ffff8800efffd000
software IO TLB at phys 0xebffd000 - 0xefffd000
audit: initializing netlink socket (disabled)
type=2000 audit(1429198618.976:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 7867
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
ERST: Table is not found!
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc700 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc708 irq 15
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 11:361:639
rtc_cmos 00:06: setting system clock to 2015-04-16 15:36:59 UTC (1429198619)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata1.00: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100
ata1.00: 163840000 sectors, multi 16: LBA48
ata1.01: ATAPI: XenClient DVD-ROM, 0.10.2, max UDMA/100
ata1.00: configured for MWDMA2
ata2.01: NODEV after polling detection
ata2.00: ATAPI: XenClient DVD-ROM, 0.10.2, max UDMA/100
ata1.01: configured for MWDMA2
ata2.00: configured for MWDMA2
scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0.10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 163840000 512-byte logical blocks: (83.8 GB/78.1 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
scsi 0:0:1:0: CD-ROM TSSTcorp DVD-ROM TS-H353B D700 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sda: sda1 sda2 < sda5 >
sr 0:0:1:0: Attached scsi CD-ROM sr0
sr 0:0:1:0: Attached scsi generic sg1 type 5
scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 0.10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Attached SCSI disk
sr1: scsi3-mmc drive: 4x/4x xa/form2 tray
sr 1:0:0:0: Attached scsi CD-ROM sr1
sr 1:0:0:0: Attached scsi generic sg2 type 5
Freeing unused kernel memory: 932k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1572k freed
Freeing unused kernel memory: 1180k freed
udevd[99]: starting version 175
Xen version 4.1.
XEN hypercall page initialised
xc-xen-platform-pci 0000:00:03.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
Grant table initialized
XENBUS: Device with no driver: device/vbd/5632
XENBUS: Device with no driver: device/vbd/768
XENBUS: Device with no driver: device/vif/0
XENBUS: Device with no driver: device/v4v/0
xc-xen module initialized
xen_blk: trying to unplug the emulated disks
Xen Platform PCI: I/O protocol version 1
removing scsi device scsi0 (00:00:00)
sd 0:0:0:0: [sda] Stopping disk
ata1.00: disabled
Xen Platform PCI: I/O protocol version 1
xc-vbd vbd-5632: 19 xenbus_dev_probe on device/vbd/5632
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:00:05.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
xen_blk: xvda: barrier: enabled
8139cp 0000:00:05.0: eth0: RTL-8139C+ at 0xffffc9000060e000, 92:0c:d0:a1:25:5a, IRQ 36
8139cp 0000:00:05.0: setting latency timer to 64
8139too: 8139too Fast Ethernet driver 0.9.28
xvda: xvda1 xvda2 < xvda5 >
Setting capacity to 163840000
xvda: detected capacity change from 0 to 83886080000
FDC 0 is a S82078B
xen_netif: unplugging nic emulated devices
8139cp 0000:00:05.0: PCI INT A disabled
Xen Platform PCI: I/O protocol version 1
xen_netif initialized
Xen V4V device installed.
ctxusb: Citrix USB host controller
ctxusb_hcd ctxusb_hcd: Citrix USB Host Controller, driver 1.0.0
ctxusb_hcd ctxusb_hcd: Citrix USB Host Controller
ctxusb_hcd ctxusb_hcd: new USB bus registered, assigned bus number 1
ctxusb: XEN HCD start
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 31 ports detected
ctxusb: Wait bind response send it
EXT4-fs (xvda1): INFO: recovery required on readonly filesystem
EXT4-fs (xvda1): write access will be enabled during recovery
Switching to clocksource tsc
EXT4-fs (xvda1): orphan cleanup on readonly fs
EXT4-fs (xvda1): ext4_orphan_cleanup: deleting unreferenced inode 1974617
EXT4-fs (xvda1): ext4_orphan_cleanup: deleting unreferenced inode 1974614
EXT4-fs (xvda1): ext4_orphan_cleanup: deleting unreferenced inode 1979874
EXT4-fs (xvda1): ext4_orphan_cleanup: deleting unreferenced inode 1979468
EXT4-fs (xvda1): ext4_orphan_cleanup: deleting unreferenced inode 1837703
EXT4-fs (xvda1): ext4_orphan_cleanup: deleting unreferenced inode 1845946
EXT4-fs (xvda1): ext4_orphan_cleanup: deleting unreferenced inode 1974626
EXT4-fs (xvda1): ext4_orphan_cleanup: deleting unreferenced inode 1972237
EXT4-fs (xvda1): ext4_orphan_cleanup: deleting unreferenced inode 4194308
EXT4-fs (xvda1): 9 orphan inodes deleted
EXT4-fs (xvda1): recovery complete
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 2077692k swap on /dev/xvda5. Priority:-1 extents:1 across:2077692k SS
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[407]: starting version 175
EXT4-fs (xvda1): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
XenMou 0000:00:04.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
XenMou (v2) inishalised ok. OS = 0
XenMou: name Video Bus, ev_bits 0x1.
input: XenMou: Video Bus as /devices/pci0000:00/0000:00:04.0/input/input3
XenMou: name Microsoft Microsoft Basi, ev_bits 0xf a 0x0000000000000003 r 0x00000100 b 0x00000000 00000000 00070000.
input: XenMou: Microsoft Microsoft Basi as /devices/pci0000:00/0000:00:04.0/input/input4
XenMou: name Winbond Electronics Corp , ev_bits 0xf a 0x0000000000000003 r 0x00000100 b 0x00000000 00000000 00070000.
input: XenMou: Winbond Electronics Corp as /devices/pci0000:00/0000:00:04.0/input/input5
piix4_smbus 0000:00:01.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
parport_pc 00:0b: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ppdev: user-space parallel port driver
type=1400 audit(1429198620.925:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=741 comm="apparmor_parser"
type=1400 audit(1429198620.925:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=741 comm="apparmor_parser"
type=1400 audit(1429198620.925:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=741 comm="apparmor_parser"
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
lp0: using parport0 (interrupt-driven).
init: failsafe main process (807) killed by TERM signal
type=1400 audit(1429198621.037:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=867 comm="apparmor_parser"
type=1400 audit(1429198621.037:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=867 comm="apparmor_parser"
snd_intel8x0 0000:00:06.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
intel8x0: disable (unknown or VT-d) VM optimization
snd_intel8x0 0000:00:06.0: setting latency timer to 64
type=1400 audit(1429198621.081:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=910 comm="apparmor_parser"
type=1400 audit(1429198621.081:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=909 comm="apparmor_parser"
type=1400 audit(1429198621.081:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=910 comm="apparmor_parser"
type=1400 audit(1429198621.081:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=910 comm="apparmor_parser"
XENFS: not registering filesystem on non-xen platform
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
init: alsa-restore main process (1041) terminated with status 19
intel8x0: measure - unreliable DMA position..
intel8x0: measure - unreliable DMA position..
intel8x0: measure - unreliable DMA position..
intel8x0: clocking to 48000
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf0000000, mapped to 0xffffc90001300000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
init: plymouth-splash main process (1499) terminated with status 1
eth0: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A