dmesg - mytest
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.13.13-cdos (root@m17-Product) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #1 SMP Mon Jan 19 09:03:26 CST 2015 (Ubuntu 3.8.0-19.29-generic 3.8.8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bc7b8fff] usable
BIOS-e820: [mem 0x00000000bc7b9000-0x00000000bc968fff] reserved
BIOS-e820: [mem 0x00000000bc969000-0x00000000bc978fff] ACPI data
BIOS-e820: [mem 0x00000000bc979000-0x00000000bd7d5fff] ACPI NVS
BIOS-e820: [mem 0x00000000bd7d6000-0x00000000beda7fff] reserved
BIOS-e820: [mem 0x00000000beda8000-0x00000000beda8fff] usable
BIOS-e820: [mem 0x00000000beda9000-0x00000000bedcbfff] ACPI NVS
BIOS-e820: [mem 0x00000000bedcc000-0x00000000bef1dfff] usable
BIOS-e820: [mem 0x00000000bef1e000-0x00000000bf5fcfff] reserved
BIOS-e820: [mem 0x00000000bf5fd000-0x00000000bf640fff] usable
BIOS-e820: [mem 0x00000000bf641000-0x00000000bfdf1fff] reserved
BIOS-e820: [mem 0x00000000bfdf2000-0x00000000bfdfffff] usable
BIOS-e820: [mem 0x00000000fe012000-0x00000000fe012fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec3ffff] reserved
BIOS-e820: [mem 0x00000000fecc0000-0x00000000fed7ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO FFFFFFFFFF/VT8611, BIOS O09KT11PUS 07/04/2014
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x140000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D7FFF write-protect
D8000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BFE00000 mask FFFE00000 uncachable
3 base 100000000 mask FC0000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3070MB, range: 2MB, type UC
reg 3, base: 4GB, range: 1GB, type WB
total RAM covered: 4094M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3070MB, range: 2MB, type UC
reg 3, base: 4GB, range: 1GB, type WB
e820: update [mem 0xbfe00000-0xffffffff] usable ==> reserved
found SMP MP-table at [mem 0x000fd890-0x000fd89f] mapped at [c00fd890]
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009a000] 9a000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x379fffff] page 2M
[mem 0x37a00000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
RAMDISK: [mem 0x350fe000-0x36876fff]
ACPI: RSDP 000f0490 00024 (v02 LENOVO)
ACPI: XSDT bc96f068 00054 (v01 LENOVO TC-03 00001110 AMI 00010013)
ACPI: FACP bc978660 0010C (v05 LENOVO TC-03 00001110 AMI 00010013)
ACPI: DSDT bc96f150 0950C (v02 LENOVO TC-03 00001110 INTL 20051117)
ACPI: FACS bd7cc080 00040
ACPI: FPDT bc978770 00044 (v01 LENOVO TC-03 00001110 AMI 00010013)
ACPI: MCFG bc9787b8 0003C (v01 LENOVO TC-03 00001110 MSFT 00000097)
ACPI: HPET bc9787f8 00038 (v01 LENOVO TC-03 00001110 AMI. 00000005)
ACPI: BGRT bc978830 00038 (v00 LENOVO TC-03 00001110 AMI 00010013)
ACPI: APIC bc978868 0006E (v03 LENOVO TC-03 00001110 AMI 00010013)
ACPI: Local APIC address 0xfee00000
4228MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x3fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009dfff]
node 0: [mem 0x00100000-0xbc7b8fff]
node 0: [mem 0xbeda8000-0xbeda8fff]
node 0: [mem 0xbedcc000-0xbef1dfff]
node 0: [mem 0xbf5fd000-0xbf640fff]
node 0: [mem 0xbfdf2000-0xbfdfffff]
node 0: [mem 0x00000000-0x3fffffff]
On node 0 totalpages: 1034476
free_area_init_node: node 0, pgdat c18e26c0, node_mem_map f28fe200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3950 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 8457 pages used for memmap
HighMem zone: 797783 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 9, version 3, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 10, version 3, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
e820: [mem 0xbfe00000-0xfe011fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bce000 s35200 r0 d22144 u57344
pcpu-alloc: s35200 r0 d22144 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1024235
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
allocated 10485632 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:00140000)
Memory: 4050756k/5242880k available (6178k kernel code, 87148k reserved, 2968k data, 800k init, 3224960k highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc18ef000 - 0xc19b7000 ( 800 kB)
.data : 0xc1608a8e - 0xc18eeb00 (2968 kB)
.text : 0xc1000000 - 0xc1608a8e (6178 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1733.183 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3466.36 BogoMIPS (lpj=6932732)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Disabled at boot.
AppArmor: AppArmor disabled by boot time parameter
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
mce: CPU supports 0 MCE banks
process: using mwait in idle threads
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
tlb_flushall_shift: -1
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26020 entries in 51 pages
Enabling APIC mode: Flat. Using 2 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Centaur VIA Nano X2 C4350AL @ 1.6+ GHz (fam: 06, model: 0f, stepping: 0d)
Performance Events:
x86_vendor is 5
this is centaur_pmu_init
fixed PMC is 3
start exec x86_add_quirk
start exec intel_pmu_lbr_init_core
4-deep LBR,
start meecpy nano_hw_cache_event_ids
event on fixed counters
x86_pmu.lbr_nr is 0
nano PMU driver.
centaur_arch_events_quirk is exec here
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 0000007fffffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
event type is -1055620603
reserve_perfctr_nmi
reserve_evntsel_nmi
NMI watchdog: disabled (cpu0): unable to create perf event: -22
CPU 1 irqstacks, hard=f6cce000 soft=f6cd8000
smpboot: Booting Node 0, Processors #1 OK
Initializing CPU#1
mce: CPU supports 0 MCE banks
TSC synchronization [CPU#0 -> CPU#1]:
Measured 78 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
Brought up 2 CPUs
smpboot: Total of 2 processors activated (6933.00 BogoMIPS)
event type is -1055620603
reserve_perfctr_nmi
reserve_evntsel_nmi
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbc979000-0xbd7d5fff] (15060992 bytes)
PM: Registering ACPI NVS region [mem 0xbeda9000-0xbedcbfff] (143360 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Actual Package length (8) is larger than NumElements field (6), truncated
ACPI: Actual Package length (8) is larger than NumElements field (6), truncated
ACPI: Actual Package length (8) is larger than NumElements field (6), truncated
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1106:3456] type 00 class 0x060000
pci 0000:00:00.1: [1106:31b0] type 00 class 0x060000
pci 0000:00:00.2: [1106:31b1] type 00 class 0x060000
pci 0000:00:00.3: [1106:31b2] type 00 class 0x060000
pci 0000:00:00.4: [1106:31b3] type 00 class 0x060000
pci 0000:00:00.5: [1106:31b4] type 00 class 0x060000
pci 0000:00:00.6: [1106:31b5] type 00 class 0x060000
pci 0000:00:00.7: [1106:0709] type 00 class 0x060000
pci 0000:00:02.0: [1106:070a] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [1106:070b] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [1106:070e] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0f.0: [1106:9082] type 00 class 0x010601
pci 0000:00:0f.0: reg 20: [io 0xf0a0-0xf0bf]
pci 0000:00:0f.0: reg 24: [mem 0xfd206000-0xfd2063ff]
pci 0000:00:0f.0: PME# supported from D3hot
pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.0: reg 20: [io 0xf080-0xf09f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.1: reg 20: [io 0xf060-0xf07f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.2: reg 20: [io 0xf040-0xf05f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.3: reg 20: [io 0xf020-0xf03f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.4: reg 20: [io 0xf000-0xf01f]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.7: [1106:3104] type 00 class 0x0c0320
pci 0000:00:10.7: reg 10: [mem 0xfd205000-0xfd2050ff]
pci 0000:00:10.7: supports D1 D2
pci 0000:00:10.7: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:11.0: [1106:345b] type 00 class 0x060100
pci 0000:00:11.7: [1106:31b7] type 00 class 0x060000
pci 0000:00:12.0: [1106:9201] type 00 class 0x0c0330
pci 0000:00:12.0: reg 10: [mem 0xfd204000-0xfd204fff 64bit]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: [1106:31b8] type 01 class 0x060400
pci 0000:00:14.0: [1106:3288] type 00 class 0x040300
pci 0000:00:14.0: reg 10: [mem 0xfd200000-0xfd203fff 64bit]
pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [1002:6778] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfd120000-0xfd13ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xfd100000-0xfd11ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xfd140000-0xfd143fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd100000-0xfd1fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 18: [mem 0xfd000000-0xfd000fff 64bit]
pci 0000:02:00.0: reg 20: [mem 0xd1000000-0xd1003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfd000000-0xfd0fffff]
pci 0000:00:03.0: bridge window [mem 0xd1000000-0xd10fffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 03-04]
pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:06.0: bridge window [mem 0xfc000000-0xfcffffff]
pci 0000:00:06.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
pci 0000:00:13.0: PCI bridge to [bus 05]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbc7b9000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbeda9000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbef1e000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf641000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfe00000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: [mem 0xfecc0000-0xfed7ffff] could not be reserved
system 00:00: [mem 0xfe012000-0xfe012fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfed01000-0xfed010ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0a00-0x0a1f] has been reserved
system 00:02: [io 0x0a20-0x0a2f] has been reserved
system 00:02: [io 0x0a30-0x0a3f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 3]
pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:05: [dma 4]
pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:0b: [io 0x0400-0x041f] has been reserved
system 00:0b: [mem 0xfec00000-0xfec3ffff] could not be reserved
system 00:0b: [mem 0xff800000-0xffffffff] has been reserved
system 00:0b: [mem 0xff800000-0xffffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd100000-0xfd1fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfd000000-0xfd0fffff]
pci 0000:00:03.0: bridge window [mem 0xd1000000-0xd10fffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 03-04]
pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:06.0: bridge window [mem 0xfc000000-0xfcffffff]
pci 0000:00:06.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
pci 0000:00:13.0: PCI bridge to [bus 05]
pci 0000:00:13.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfd100000-0xfd1fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfd000000-0xfd0fffff]
pci_bus 0000:02: resource 2 [mem 0xd1000000-0xd10fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfc000000-0xfcffffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: disabling DAC on VIA PCI bridge
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 24036k freed
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1427280852.140:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 1659
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 64 for MSI/MSI-X
pcieport 0000:00:03.0: irq 65 for MSI/MSI-X
pcieport 0000:00:06.0: irq 66 for MSI/MSI-X
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:06.0:pcie04: HPC vendor_id 1106 device_id 70e ss_vid 1106 ss_did f456
pciehp 0000:00:06.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
uvesafb: failed to execute /sbin/v86d
uvesafb: make sure that the v86d helper is installed and executable
uvesafb: Getting VBE info block failed (eax=0x4f00, err=32512)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
vesafb: mode is 1400x1050x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xf8480000, using 5824k, total 5824k
Console: switching to colour frame buffer device 175x65
fb0: VESA VGA frame buffer device
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:10.7: EHCI Host Controller
ehci-pci 0000:00:10.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:10.7: debug port 1
ehci-pci 0000:00:10.7: irq 23, io mem 0xfd205000
ehci-pci 0000:00:10.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.13.13-cdos ehci_hcd
usb usb1: SerialNumber: 0000:00:10.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 20, io base 0x0000f080
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.13.13-cdos uhci_hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 22, io base 0x0000f060
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.13.13-cdos uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000f040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.13.13-cdos uhci_hcd
usb usb4: SerialNumber: 0000:00:10.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 23, io base 0x0000f020
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.13.13-cdos uhci_hcd
usb usb5: SerialNumber: 0000:00:10.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.4: UHCI Host Controller
uhci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:10.4: irq 20, io base 0x0000f000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.8.13.13-cdos uhci_hcd
usb usb6: SerialNumber: 0000:00:10.4
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:00:12.0: setting latency timer to 64
xhci_hcd 0000:00:12.0: xHCI Host Controller
xhci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 7
xhci_hcd 0000:00:12.0: PCI: Disallowing DAC for device
xhci_hcd 0000:00:12.0: irq 67 for MSI/MSI-X
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 3.8.13.13-cdos xhci_hcd
usb usb7: SerialNumber: 0000:00:12.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
xhci_hcd 0000:00:12.0: xHCI Host Controller
xhci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:00:12.0: PCI: Disallowing DAC for device
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.8.13.13-cdos xhci_hcd
usb usb8: SerialNumber: 0000:00:12.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 3 ports detected
isapnp: No Plug & Play device found
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 563e88b4dea85f501d1e7dc75920236bd72eb4a3'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:06: setting system clock to 2015-03-25 10:54:12 UTC (1427280852)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 800k freed
Write protecting the kernel text: 6180k
Write protecting the kernel read-only data: 2424k
NX-protecting the kernel data: 4060k
systemd-udevd[100]: starting version 204
Disabling lock debugging due to kernel taint
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI: Disallowing DAC for device
ahci 0000:00:0f.0: version 3.0
ahci 0000:00:0f.0: irq 68 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:0f.0: PCI: Disallowing DAC for device
r8169 0000:02:00.0: irq 69 for MSI/MSI-X
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
checking generic (c0000000 5b0000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf840e000, c0:3f:d5:7d:8a:93, XID 0c000800 IRQ 69
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[drm] initializing kernel modesetting (CAICOS 0x1002:0x6778 0x1462:0xB497).
radeon 0000:01:00.0: PCI: Disallowing DAC for device
radeon: No suitable DMA available.
[drm] register mmio base: 0xFD120000
[drm] register mmio size: 131072
ATOM BIOS: C26411
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 425328 kiB
[TTM] Zone highmem: Available graphics memory: 2037808 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading CAICOS Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
ahci 0000:00:0f.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:0f.0: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc sxs boh
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xf61b4c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xf61b4c0c
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 70 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
scsi0 : ahci
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] VGA-1
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller without fan control
scsi1 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfd206000 port 0xfd206100 irq 68
ata2: SATA max UDMA/133 abar m1024@0xfd206000 port 0xfd206180 irq 68
[drm] radeon: power management initialized
[drm] fb mappable at 0xC0142000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
usb 4-1: new low-speed USB device number 2 using uhci_hcd
Console: switching to colour frame buffer device 240x67
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0
usb 4-1: New USB device found, idVendor=17ef, idProduct=6019
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: Lenovo Optical USB Mouse
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-9: SAMSUNG MZ7TD128HAFV-000L1, DXT05L0Q, max UDMA/133
ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7TD128 DXT0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 4-2: new low-speed USB device number 3 using uhci_hcd
usb 4-2: New USB device found, idVendor=0461, idProduct=4e04
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: USB NETVISTA FULL WIDTH KEYBOARD
usb 4-2: Manufacturer: NOVATEK
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Lenovo Optical USB Mouse as /devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/input/input3
hid-generic 0003:17EF:6019.0001: input,hidraw0: USB HID v1.11 Mouse [Lenovo Optical USB Mouse] on usb-0000:00:10.2-1/input0
input: NOVATEK USB NETVISTA FULL WIDTH KEYBOARD as /devices/pci0000:00/0000:00:10.2/usb4/4-2/4-2:1.0/input/input4
hid-generic 0003:0461:4E04.0002: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB NETVISTA FULL WIDTH KEYBOARD] on usb-0000:00:10.2-2/input0
input: NOVATEK USB NETVISTA FULL WIDTH KEYBOARD as /devices/pci0000:00/0000:00:10.2/usb4/4-2/4-2:1.1/input/input5
hid-generic 0003:0461:4E04.0003: input,hidraw2: USB HID v1.10 Device [NOVATEK USB NETVISTA FULL WIDTH KEYBOARD] on usb-0000:00:10.2-2/input1
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVD-RAM GHB0N, JE00, max UDMA/133
ata2.00: configured for UDMA/133
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GHB0N JE00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/8x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 4136956k swap on /dev/sda5. Priority:-1 extents:1 across:4136956k SS
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[377]: starting version 204
runSAK: Module loaded.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
longhaul: Option "enable" not set. Aborting.
padlock_aes: Using VIA PadLock ACE for AES algorithm.
device-mapper: multipath: version 1.5.1 loaded
padlock_sha: Using VIA PadLock ACE for SHA1/SHA256 algorithms.
hda-intel 0000:00:14.0: Force to non-snoop mode
snd_hda_intel 0000:00:14.0: PCI: Disallowing DAC for device
input: HDA VIA VT82xx Line as /devices/pci0000:00/0000:00:14.0/sound/card0/input6
input: HDA VIA VT82xx Rear Mic as /devices/pci0000:00/0000:00:14.0/sound/card0/input7
input: HDA VIA VT82xx Front Mic as /devices/pci0000:00/0000:00:14.0/sound/card0/input8
input: HDA VIA VT82xx Front Headphone as /devices/pci0000:00/0000:00:14.0/sound/card0/input9
input: HDA VIA VT82xx Line Out CLFE as /devices/pci0000:00/0000:00:14.0/sound/card0/input10
input: HDA VIA VT82xx Line Out Surround as /devices/pci0000:00/0000:00:14.0/sound/card0/input11
input: HDA VIA VT82xx Line Out Front as /devices/pci0000:00/0000:00:14.0/sound/card0/input12
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: irq 71 for MSI/MSI-X
snd_hda_intel 0000:01:00.1: PCI: Disallowing DAC for device
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
init: samba-ad-dc main process (668) terminated with status 1
longhaul: Option "enable" not set. Aborting.
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1222) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
The process is "Default" (pid 1355)
The process of parent is "mdm" (pid 1191)
runSAK:write char 7
runSAK:write num is 7
SysRq : SAK
SAK: killed process 1223 (Xorg): task_session(p)==tty->session
SAK: killed process 1223 (Xorg): task_session(p)==tty->session
SAK: killed process 1293 (Xorg): task_session(p)==tty->session
type=1305 audit(1427252062.645:2): audit_pid=1390 old=0 auid=4294967295 ses=4294967295 res=1
init: plymouth-stop pre-start process (1461) terminated with status 1
The process is "Default" (pid 1475)
The process of parent is "mdm" (pid 1395)
runSAK:write char 7
runSAK:write num is 7
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:02:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: avahi-daemon main process (1649) killed by ABRT signal
init: avahi-daemon main process ended, respawning
init: avahi-daemon main process (2292) killed by ABRT signal
init: avahi-daemon main process ended, respawning
init: avahi-daemon main process (2305) killed by ABRT signal
init: avahi-daemon main process ended, respawning
init: avahi-daemon main process (2318) killed by ABRT signal
init: avahi-daemon main process ended, respawning
init: avahi-daemon main process (2331) killed by ABRT signal
init: avahi-daemon main process ended, respawning
init: avahi-daemon main process (2344) killed by ABRT signal
init: avahi-daemon main process ended, respawning
init: avahi-daemon main process (2357) killed by ABRT signal
init: avahi-daemon main process ended, respawning
init: avahi-daemon main process (2370) killed by ABRT signal
init: avahi-daemon main process ended, respawning
init: avahi-daemon main process (2383) killed by ABRT signal
init: avahi-daemon main process ended, respawning
init: avahi-daemon main process (2397) killed by ABRT signal
init: avahi-daemon main process ended, respawning
init: avahi-daemon main process (2410) killed by ABRT signal
init: avahi-daemon respawning too fast, stopped
longhaul: Option "enable" not set. Aborting.
init: plymouth-stop pre-start process (3182) terminated with status 1