dmesg - Dual_core
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
Command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/arcadia--vg-root ro quiet
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007fe4dfff] usable
BIOS-e820: [mem 0x000000007fe4e000-0x000000007fe55fff] ACPI data
BIOS-e820: [mem 0x000000007fe56000-0x000000007fe56fff] usable
BIOS-e820: [mem 0x000000007fe57000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000207fffefff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: HP ProLiant DL585 G2, BIOS A07 11/21/2007
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x207ffff max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000002080000000 aka 133120M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7fe57 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] mapped at [ffff8800000f4f80]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01af3000, 0x01af3fff] PGTABLE
BRK [0x01af4000, 0x01af4fff] PGTABLE
BRK [0x01af5000, 0x01af5fff] PGTABLE
init_memory_mapping: [mem 0x207fc00000-0x207fdfffff]
[mem 0x207fc00000-0x207fdfffff] page 2M
BRK [0x01af6000, 0x01af6fff] PGTABLE
init_memory_mapping: [mem 0x207c000000-0x207fbfffff]
[mem 0x207c000000-0x207fbfffff] page 2M
init_memory_mapping: [mem 0x2000000000-0x207bffffff]
[mem 0x2000000000-0x207bffffff] page 2M
BRK [0x01af7000, 0x01af7fff] PGTABLE
init_memory_mapping: [mem 0x1000000000-0x1fffffffff]
[mem 0x1000000000-0x1fffffffff] page 2M
BRK [0x01af8000, 0x01af8fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x7fe4dfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7fdfffff] page 2M
[mem 0x7fe00000-0x7fe4dfff] page 4k
init_memory_mapping: [mem 0x7fe56000-0x7fe56fff]
[mem 0x7fe56000-0x7fe56fff] page 4k
init_memory_mapping: [mem 0x100000000-0xfffffffff]
[mem 0x100000000-0xfffffffff] page 2M
init_memory_mapping: [mem 0x207fe00000-0x207fffefff]
[mem 0x207fe00000-0x207fffefff] page 4k
RAMDISK: [mem 0x3615e000-0x370a6fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F4F00 000024 (v02 HP )
ACPI: XSDT 0x000000007FE4ECC0 000074 (v01 HP ProLiant 00000002 \xffffffd2? 0000162E)
ACPI: FACP 0x000000007FE4ED40 0000F4 (v03 HP A07 00000002 \xffffffd2? 0000162E)
ACPI: DSDT 0x000000007FE4EE40 004939 (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 0x000000007FE4E100 000040
ACPI: SPCR 0x000000007FE4E140 000050 (v01 HP SPCRRBSU 00000001 \xffffffd2? 0000162E)
ACPI: HPET 0x000000007FE4E1C0 000038 (v01 HP ProLiant 00000002 \xffffffd2? 0000162E)
ACPI: SPMI 0x000000007FE4E200 000040 (v05 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: ERST 0x000000007FE4E240 0001D0 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: APIC 0x000000007FE4E440 000106 (v01 HP ProLiant 00000002 00000000)
ACPI: SRAT 0x000000007FE4E580 0001A0 (v01 AMD HAMMER 00000001 AMD 00000001)
ACPI: FFFF 0x000000007FE4E980 000176 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: BERT 0x000000007FE4EB00 000030 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: HEST 0x000000007FE4EB40 000170 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 1 -> APIC 0x02 -> Node 1
SRAT: PXM 1 -> APIC 0x03 -> Node 1
SRAT: PXM 2 -> APIC 0x04 -> Node 2
SRAT: PXM 2 -> APIC 0x05 -> Node 2
SRAT: PXM 3 -> APIC 0x06 -> Node 3
SRAT: PXM 3 -> APIC 0x07 -> Node 3
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x00100000-0x7fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x87fffffff]
SRAT: Node 1 PXM 1 [mem 0x880000000-0x107fffffff]
SRAT: Node 2 PXM 2 [mem 0x1080000000-0x187fffffff]
SRAT: Node 3 PXM 3 [mem 0x1880000000-0x207fffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x7fffffff] -> [mem 0x00000000-0x7fffffff]
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x87fffffff] -> [mem 0x00000000-0x87fffffff]
Initmem setup node 0 [mem 0x00000000-0x87fffffff]
NODE_DATA [mem 0x87fffb000-0x87fffffff]
Initmem setup node 1 [mem 0x880000000-0x107fffffff]
NODE_DATA [mem 0x107fffb000-0x107fffffff]
Initmem setup node 2 [mem 0x1080000000-0x187fffffff]
NODE_DATA [mem 0x187fffb000-0x187fffffff]
Initmem setup node 3 [mem 0x1880000000-0x207fffefff]
NODE_DATA [mem 0x207fffa000-0x207fffefff]
[ffffea0000000000-ffffea001dbfffff] PMD -> [ffff88085fe00000-ffff88087bdfffff] on node 0
[ffffea001dc00000-ffffea0039bfffff] PMD -> [ffff88105fe00000-ffff88107bdfffff] on node 1
[ffffea0039c00000-ffffea0055bfffff] PMD -> [ffff88185fe00000-ffff88187bdfffff] on node 2
[ffffea0055c00000-ffffea0071bfffff] PMD -> [ffff88205f400000-ffff88207b3fffff] on node 3
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x207fffefff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x7fe4dfff]
node 0: [mem 0x7fe56000-0x7fe56fff]
node 0: [mem 0x100000000-0x87fffffff]
node 1: [mem 0x880000000-0x107fffffff]
node 2: [mem 0x1080000000-0x187fffffff]
node 3: [mem 0x1880000000-0x207fffefff]
On node 0 totalpages: 8388077
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 7107 pages used for memmap
DMA32 zone: 519759 pages, LIFO batch:31
Normal zone: 107520 pages used for memmap
Normal zone: 7864320 pages, LIFO batch:31
On node 1 totalpages: 8388608
Normal zone: 114688 pages used for memmap
Normal zone: 8388608 pages, LIFO batch:31
On node 2 totalpages: 8388608
Normal zone: 114688 pages used for memmap
Normal zone: 8388608 pages, LIFO batch:31
On node 3 totalpages: 8388607
Normal zone: 114688 pages used for memmap
Normal zone: 8388607 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xbfbf0000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 17, address 0xbfbf0000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xd7fd0000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 17, address 0xd7fd0000, GSI 24-30
ACPI: IOAPIC (id[0x0a] address[0xd7fe0000] gsi_base[31])
IOAPIC[2]: apic_id 10, version 17, address 0xd7fe0000, GSI 31-37
ACPI: IOAPIC (id[0x0b] address[0xd7ff0000] gsi_base[38])
IOAPIC[3]: apic_id 11, version 17, address 0xd7ff0000, GSI 38-61
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
ACPI: NMI_SRC (dfl dfl global_irq 28)
ACPI: NMI_SRC (dfl dfl global_irq 35)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 78
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7fe4e000-0x7fe55fff]
PM: Registered nosave memory: [mem 0x7fe57000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee0ffff]
PM: Registered nosave memory: [mem 0xfee10000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0x80000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:4
PERCPU: Embedded 27 pages/cpu @ffff88087fc00000 s80896 r8192 d21504 u1048576
pcpu-alloc: s80896 r8192 d21504 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 4 [1] 1 5 [2] 2 6 [3] 3 7
Built 4 zonelists in Zone order, mobility grouping on. Total pages: 33095132
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/arcadia--vg-root ro quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x74000000-0x75ffffff] (32MB)
Aperture pointing to e820 RAM. Ignoring.
AGP: Your BIOS doesn't leave a aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0x74000000-0x77ffffff] (65536KB)
PM: Registered nosave memory: [mem 0x74000000-0x77ffffff]
Memory: 132219984K/134215600K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 1995616K reserved)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:1390 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3214.847 MHz processor
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 6429.69 BogoMIPS (lpj=12859388)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Mount-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mountpoint-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
ftrace: allocating 21601 entries in 85 pages
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
smpboot: CPU0: Dual-Core AMD Opteron(tm) Processor 8224 SE (fam: 0f, model: 41, stepping: 03)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
x86: Booting SMP configuration:
.... node #1, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #2, CPUs: #2
.... node #3, CPUs: #3
.... node #0, CPUs: #4
.... node #1, CPUs: #5
.... node #2, CPUs: #6
.... node #3, CPUs: #7
x86: Booted up 4 nodes, 8 CPUs
smpboot: Total of 8 processors activated (51437.56 BogoMIPS)
devtmpfs: initialized
memory block size : 128MB
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 1: io port [1000, 3fff]
node 1 link 2: io port [4000, ffff]
TOM: 0000000080000000 aka 2048M
node 0 link 1: mmio [b0000000, bfffffff]
node 1 link 2: mmio [c0000000, deffffff]
node 0 link 1: mmio [e0000000, e3ffffff]
node 1 link 2: mmio [e4000000, efffffff]
node 1 link 2: mmio [a0000, bffff]
TOM2: 0000002080000000 aka 133120M
bus: [bus 00-3f] on node 0 link 1
bus: 00 [io 0x0000-0x3fff]
bus: 00 [mem 0x80000000-0xbfffffff]
bus: 00 [mem 0xdf000000-0xe3ffffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x2080000000-0xfcffffffff]
bus: [bus 40-ff] on node 1 link 2
bus: 40 [io 0x4000-0xffff]
bus: 40 [mem 0xc0000000-0xdeffffff]
bus: 40 [mem 0xe4000000-0xefffffff]
bus: 40 [mem 0x000a0000-0x000bffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
PCI: HP ProLiant DL585 G2 detected, enabling pci=bfsort.
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88207BC83000 000AC4 (v02 HP PNOWSSDT 00000002 HP 00000001)
ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20140424/dsopcode-236)
ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff88107f827158), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: host bridge window [io 0x0000-0x03af] (ignored)
acpi PNP0A03:00: host bridge window [io 0x03e0-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io 0x1000-0x3fff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0xb0000000-0xbfffffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0xe0000000-0xe3ffffff] (ignored)
PCI: root bus 00: hardware-probed resources
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x3fff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff]
pci_bus 0000:00: root bus resource [mem 0xdf000000-0xe3ffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x2080000000-0xfcffffffff]
pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
pci 0000:00:02.0: reg 0x10: [mem 0xbfbe0000-0xbfbe0fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
pci 0000:00:02.1: reg 0x10: [mem 0xbfbd0000-0xbfbd00ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
pci 0000:00:06.0: reg 0x20: [io 0x0500-0x050f]
pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:09.0: [10de:005c] type 01 class 0x060401
pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:00:19.0: [1022:1100] type 00 class 0x060000
pci 0000:00:19.1: [1022:1101] type 00 class 0x060000
pci 0000:00:19.2: [1022:1102] type 00 class 0x060000
pci 0000:00:19.3: [1022:1103] type 00 class 0x060000
pci 0000:00:1a.0: [1022:1100] type 00 class 0x060000
pci 0000:00:1a.1: [1022:1101] type 00 class 0x060000
pci 0000:00:1a.2: [1022:1102] type 00 class 0x060000
pci 0000:00:1a.3: [1022:1103] type 00 class 0x060000
pci 0000:00:1b.0: [1022:1100] type 00 class 0x060000
pci 0000:00:1b.1: [1022:1101] type 00 class 0x060000
pci 0000:00:1b.2: [1022:1102] type 00 class 0x060000
pci 0000:00:1b.3: [1022:1103] type 00 class 0x060000
pci 0000:01:03.0: [1002:515e] type 00 class 0x030000
pci 0000:01:03.0: reg 0x10: [mem 0xb0000000-0xb7ffffff pref]
pci 0000:01:03.0: reg 0x14: [io 0x1000-0x10ff]
pci 0000:01:03.0: reg 0x18: [mem 0xbfdf0000-0xbfdfffff]
pci 0000:01:03.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:03.0: supports D1 D2
pci 0000:01:04.0: [0e11:b203] type 00 class 0x088000
pci 0000:01:04.0: reg 0x10: [io 0x2800-0x28ff]
pci 0000:01:04.0: reg 0x14: [mem 0xbfde0000-0xbfde01ff]
pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
pci 0000:01:04.2: [0e11:b204] type 00 class 0x088000
pci 0000:01:04.2: reg 0x10: [io 0x1400-0x14ff]
pci 0000:01:04.2: reg 0x14: [mem 0xbfdd0000-0xbfdd07ff]
pci 0000:01:04.2: reg 0x18: [mem 0xbfdc0000-0xbfdc1fff]
pci 0000:01:04.2: reg 0x1c: [mem 0xbfd00000-0xbfd7ffff]
pci 0000:01:04.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
pci 0000:01:04.4: [103c:3300] type 00 class 0x0c0300
pci 0000:01:04.4: reg 0x20: [io 0x1800-0x181f]
pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
pci 0000:01:04.6: [103c:3302] type 00 class 0x0c0701
pci 0000:01:04.6: reg 0x10: [mem 0xbfcf0000-0xbfcf00ff]
pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:09.0: bridge window [io 0x1000-0x2fff]
pci 0000:00:09.0: bridge window [mem 0xbfc00000-0xbfdfffff]
pci 0000:00:09.0: bridge window [mem 0xb0000000-0xb7ffffff pref]
pci 0000:00:09.0: bridge window [io 0x0000-0x3fff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x80000000-0xbfffffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0xdf000000-0xe3ffffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x2080000000-0xfcffffffff] (subtractive decode)
pci 0000:08:00.0: [103c:3230] type 00 class 0x010400
pci 0000:08:00.0: reg 0x10: [mem 0xbff00000-0xbfffffff 64bit]
pci 0000:08:00.0: reg 0x18: [io 0x3000-0x30ff]
pci 0000:08:00.0: reg 0x1c: [mem 0xbfef0000-0xbfef0fff 64bit]
pci 0000:08:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
pci 0000:08:00.0: supports D1
pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0c.0: PCI bridge to [bus 08-0a]
pci 0000:00:0c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:0c.0: bridge window [mem 0xbfe00000-0xbfffffff]
pci 0000:00:0d.0: PCI bridge to [bus 05-07]
pci 0000:00:0e.0: PCI bridge to [bus 02-04]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 40-ff])
acpi PNP0A03:01: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:01: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:01: [Firmware Bug]: no _PXM; falling back to node 1 from hardware (may be inconsistent with ACPI node numbers)
acpi PNP0A03:01: host bridge window [io 0x03b0-0x03bb] (ignored)
acpi PNP0A03:01: host bridge window [io 0x03c0-0x03df] (ignored)
acpi PNP0A03:01: host bridge window [io 0x4000-0xffff] (ignored)
acpi PNP0A03:01: host bridge window [mem 0xc0000000-0xdeffffff] (ignored)
acpi PNP0A03:01: host bridge window [mem 0xe4000000-0xefffffff] (ignored)
acpi PNP0A03:01: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
PCI: root bus 40: hardware-probed resources
acpi PNP0A03:01: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:40
pci_bus 0000:40: root bus resource [bus 40-ff]
pci_bus 0000:40: root bus resource [io 0x4000-0xffff]
pci_bus 0000:40: root bus resource [mem 0xc0000000-0xdeffffff]
pci_bus 0000:40: root bus resource [mem 0xe4000000-0xefffffff]
pci_bus 0000:40: root bus resource [mem 0x000a0000-0x000bffff]
pci 0000:40:00.0: [10de:005e] type 00 class 0x058000
pci 0000:40:01.0: [10de:00d3] type 00 class 0x058000
pci 0000:40:0b.0: [10de:005d] type 01 class 0x060400
pci 0000:40:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:0c.0: [10de:005d] type 01 class 0x060400
pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:0d.0: [10de:005d] type 01 class 0x060400
pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:0e.0: [10de:005d] type 01 class 0x060400
pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:40:10.0: [1022:7458] type 01 class 0x060400
pci 0000:40:10.0: Enabling HT MSI Mapping
pci 0000:40:10.1: [1022:7459] type 00 class 0x080010
pci 0000:40:11.0: [1022:7458] type 01 class 0x060400
pci 0000:40:11.0: Enabling HT MSI Mapping
pci 0000:40:11.1: [1022:7459] type 00 class 0x080010
pci 0000:40:0b.0: PCI bridge to [bus 4f-51]
pci 0000:40:0c.0: PCI bridge to [bus 4c-4e]
pci 0000:40:0d.0: PCI bridge to [bus 49-4b]
pci 0000:46:00.0: [10de:05fd] type 00 class 0x030000
pci 0000:46:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:46:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:46:00.0: reg 0x1c: [mem 0xdc000000-0xddffffff 64bit]
pci 0000:46:00.0: reg 0x24: [io 0x4000-0x407f]
pci 0000:46:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:40:0e.0: PCI bridge to [bus 46-48]
pci 0000:40:0e.0: bridge window [io 0x4000-0x4fff]
pci 0000:40:0e.0: bridge window [mem 0xdc000000-0xdeffffff]
pci 0000:40:0e.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:41:01.0: [14e4:164a] type 00 class 0x020000
pci 0000:41:01.0: reg 0x10: [mem 0xda000000-0xdbffffff 64bit]
pci 0000:41:01.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:41:01.0: PME# supported from D3hot D3cold
pci 0000:41:02.0: [14e4:164a] type 00 class 0x020000
pci 0000:41:02.0: reg 0x10: [mem 0xd8000000-0xd9ffffff 64bit]
pci 0000:41:02.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:41:02.0: PME# supported from D3hot D3cold
pci 0000:40:10.0: PCI bridge to [bus 41]
pci 0000:40:10.0: bridge window [mem 0xd8000000-0xdbffffff]
pci 0000:40:11.0: PCI bridge to [bus 42-45]
pci_bus 0000:40: on NUMA node 1
ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5
ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *10
ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled.
vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=none,locks=none
vgaarb: setting as boot device: PCI:0000:46:00.0
vgaarb: device added: PCI:0000:46:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:46:00.0
vgaarb: bridge control possible 0000:01:03.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
e820: reserve RAM buffer [mem 0x7fe4e000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7fe57000-0x7fffffff]
e820: reserve RAM buffer [mem 0x207ffff000-0x207fffffff]
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x0408-0x040f] has been reserved
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0700-0x073f] has been reserved
system 00:00: [io 0x0800-0x08fe] has been reserved
system 00:00: [io 0x0900-0x09fe] has been reserved
system 00:00: [io 0x09ff] has been reserved
system 00:00: [io 0x0a00-0x0afe] has been reserved
system 00:00: [io 0x0aff] has been reserved
system 00:00: [io 0x0b00-0x0bfe] has been reserved
system 00:00: [io 0x0bff] has been reserved
system 00:00: [io 0x0c80-0x0c83] has been reserved
system 00:00: [io 0x0cd4-0x0cd7] has been reserved
system 00:00: [io 0x0cf9] could not be reserved
system 00:00: [io 0x0f50-0x0f58] has been reserved
system 00:00: [io 0x0ca0-0x0ca1] has been reserved
system 00:00: [io 0x0ca4-0x0ca5] has been reserved
system 00:00: [io 0x0c00-0x0c03] has been reserved
system 00:00: [io 0x02f8-0x02ff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp: PnP ACPI: found 5 devices
ACPI: bus type PNP unregistered
pci 0000:01:03.0: BAR 6: assigned [mem 0xbfc00000-0xbfc1ffff pref]
pci 0000:01:04.2: BAR 6: assigned [mem 0xbfc20000-0xbfc2ffff pref]
pci 0000:00:09.0: PCI bridge to [bus 01]
pci 0000:00:09.0: bridge window [io 0x1000-0x2fff]
pci 0000:00:09.0: bridge window [mem 0xbfc00000-0xbfdfffff]
pci 0000:00:09.0: bridge window [mem 0xb0000000-0xb7ffffff pref]
pci 0000:08:00.0: BAR 6: assigned [mem 0xbfe00000-0xbfe3ffff pref]
pci 0000:00:0c.0: PCI bridge to [bus 08-0a]
pci 0000:00:0c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:0c.0: bridge window [mem 0xbfe00000-0xbfffffff]
pci 0000:00:0d.0: PCI bridge to [bus 05-07]
pci 0000:00:0e.0: PCI bridge to [bus 02-04]
pci_bus 0000:00: resource 4 [io 0x0000-0x3fff]
pci_bus 0000:00: resource 5 [mem 0x80000000-0xbfffffff]
pci_bus 0000:00: resource 6 [mem 0xdf000000-0xe3ffffff]
pci_bus 0000:00: resource 7 [mem 0xf0000000-0xffffffff]
pci_bus 0000:00: resource 8 [mem 0x2080000000-0xfcffffffff]
pci_bus 0000:01: resource 0 [io 0x1000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xbfc00000-0xbfdfffff]
pci_bus 0000:01: resource 2 [mem 0xb0000000-0xb7ffffff pref]
pci_bus 0000:01: resource 4 [io 0x0000-0x3fff]
pci_bus 0000:01: resource 5 [mem 0x80000000-0xbfffffff]
pci_bus 0000:01: resource 6 [mem 0xdf000000-0xe3ffffff]
pci_bus 0000:01: resource 7 [mem 0xf0000000-0xffffffff]
pci_bus 0000:01: resource 8 [mem 0x2080000000-0xfcffffffff]
pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:08: resource 1 [mem 0xbfe00000-0xbfffffff]
pci 0000:40:0b.0: PCI bridge to [bus 4f-51]
pci 0000:40:0c.0: PCI bridge to [bus 4c-4e]
pci 0000:40:0d.0: PCI bridge to [bus 49-4b]
pci 0000:46:00.0: BAR 6: can't assign mem pref (size 0x80000)
pci 0000:40:0e.0: PCI bridge to [bus 46-48]
pci 0000:40:0e.0: bridge window [io 0x4000-0x4fff]
pci 0000:40:0e.0: bridge window [mem 0xdc000000-0xdeffffff]
pci 0000:40:0e.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:41:01.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:41:02.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:40:10.0: PCI bridge to [bus 41]
pci 0000:40:10.0: bridge window [mem 0xd8000000-0xdbffffff]
pci 0000:40:11.0: PCI bridge to [bus 42-45]
pci_bus 0000:40: resource 4 [io 0x4000-0xffff]
pci_bus 0000:40: resource 5 [mem 0xc0000000-0xdeffffff]
pci_bus 0000:40: resource 6 [mem 0xe4000000-0xefffffff]
pci_bus 0000:40: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:46: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:46: resource 1 [mem 0xdc000000-0xdeffffff]
pci_bus 0000:46: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:41: resource 1 [mem 0xd8000000-0xdbffffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 65536 (order: 9, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22
ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23
pci 0000:00:0c.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Found enabled HT MSI Mapping
ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17
pci 0000:01:04.4: HCRESET not completed yet!
pci 0000:40:0b.0: Found enabled HT MSI Mapping
pci 0000:40:0c.0: Found enabled HT MSI Mapping
pci 0000:40:0d.0: Found enabled HT MSI Mapping
pci 0000:40:0e.0: Found enabled HT MSI Mapping
pci 0000:46:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 15652K (ffff88003615e000 - ffff8800370a7000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 74000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
platform rtc_cmos: registered platform RTC device (no PNP device found)
microcode: AMD CPU family 0xf not supported
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1427067416.320:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
ioapic: probe of 0000:40:10.1 failed with error -22
ioapic: probe of 0000:40:11.1 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ERST: Failed to get Error Log Address Range.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos rtc_cmos: setting system clock to 2015-03-22 23:36:56 UTC (1427067416)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
systemd-udevd[103]: starting version 215
random: systemd-udevd urandom read with 4 bits of entropy available
Floppy drive(s): fd0 is 1.44M
SCSI subsystem initialized
HP CISS Driver (v 3.6.26)
cciss 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16
cciss 0000:08:00.0: irq 78 for MSI/MSI-X
cciss 0000:08:00.0: irq 79 for MSI/MSI-X
cciss 0000:08:00.0: irq 80 for MSI/MSI-X
cciss 0000:08:00.0: irq 81 for MSI/MSI-X
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.5 (December 20, 2013)
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:02.1: EHCI Host Controller
uhci_hcd: USB Universal Host Controller Interface driver
ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci-pci 0000:00:02.1: debug port 1
ehci-pci 0000:00:02.1: cache line size of 64 is not supported
ehci-pci 0000:00:02.1: irq 23, io mem 0xbfbd0000
ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 2
uhci_hcd 0000:01:04.4: detected 8 ports
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: HCRESET not completed yet!
uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800
pata_amd 0000:00:06.0: version 0.4.1
ohci-pci: OHCI PCI platform driver
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
usb usb2: SerialNumber: 0000:01:04.4
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15
ohci-pci 0000:00:02.0: OHCI PCI host controller
ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:02.0: irq 22, io mem 0xbfbe0000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
usb usb3: SerialNumber: 0000:00:02.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 10 ports detected
cciss 0000:08:00.0: cciss0: at PCI 0000:08:00.0 IRQ 78 using DAC
cciss/c0d0: p1 p2 < p5 >
scsi2 : cciss
ata1.00: ATAPI: DW-224E-V, C.CA, max UDMA/33
ata1: nv_mode_filter: 0x739f&0x73ff->0x739f, BIOS=0x1000 (0xc2000000) ACPI=0x0
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM TEAC DW-224E-V C.CA PQ: 0 ANSI: 5
ata2: port disabled--ignoring
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
usb 2-1: new full-speed USB device number 2 using uhci_hcd
usb 2-1: New USB device found, idVendor=03f0, idProduct=1027
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: Virtual Keyboard
usb 2-1: Manufacturer: HP
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09.0/0000:01:04.4/usb2/2-1/2-1:1.0/0003:03F0:1027.0001/input/input2
hid-generic 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09.0/0000:01:04.4/usb2/2-1/2-1:1.1/0003:03F0:1027.0002/input/input3
hid-generic 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
bnx2 0000:41:01.0 eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem da000000, IRQ 31, node addr 00:1e:0b:bb:0d:d8
usb 2-2: new full-speed USB device number 3 using uhci_hcd
usb 2-2: New USB device found, idVendor=03f0, idProduct=1327
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Virtual Hub
usb 2-2: Manufacturer: HP
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 7 ports detected
usb 1-6: new high-speed USB device number 2 using ehci-pci
usb 1-6: New USB device found, idVendor=04b4, idProduct=6560
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
bnx2 0000:41:02.0 eth1: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem d8000000, IRQ 32, node addr 00:1e:0b:bb:0d:da
usb 1-6.3: new full-speed USB device number 3 using ehci-pci
usb 1-6.3: New USB device found, idVendor=046d, idProduct=c52b
usb 1-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-6.3: Product: USB Receiver
usb 1-6.3: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.1-6.3/input2
input: Logitech Unifying Device. Wireless PID:401b as /devices/pci0000:00/0000:00:02.1/usb1/1-6/1-6.3/1-6.3:1.2/0003:046D:C52B.0005/0003:046D:C52B.0006/input/input4
logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:401b] on usb-0000:00:02.1-6.3:1
input: Logitech Unifying Device. Wireless PID:4016 as /devices/pci0000:00/0000:00:02.1/usb1/1-6/1-6.3/1-6.3:1.2/0003:046D:C52B.0005/0003:046D:C52B.0007/input/input5
logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4016] on usb-0000:00:02.1-6.3:2
floppy0: no floppy controllers found
work still pending
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
PM: Starting manual resume from disk
PM: Hibernation image partition 254:1 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
fuse init (API version 7.23)
systemd-udevd[245]: starting version 215
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:1a.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:1b.3: Temperature readouts might be wrong - check erratum #141
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
ipmi message handler version 39.2
Floppy drive(s): fd0 is 1.44M
EDAC MC: Ver: 3.0.0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
IPMI System Interface driver.
ipmi_si 0000:01:04.6: probing via PCI
ipmi_si 0000:01:04.6: [mem 0xbfcf0000-0xbfcf00ff] regsize 1 spacing 1 irq 16
ipmi_si: Adding PCI-specified kcs state machine
ipmi_si: probing via ACPI
ipmi_si 00:01: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying PCI-specified kcs state machine at mem address 0xbfcf0000, slave address 0x0, irq 16
hpwdt 0000:01:04.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 0/OFF)
hpwdt 0000:01:04.0: HP Watchdog Timer Driver: 1.3.3, timer margin: 30 seconds (nowayout=0).
input: PC Speaker as /devices/platform/pcspkr/input/input7
MCE: In-kernel MCE decoding enabled.
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC enabled.
EDAC amd64: K8 revF or later detected (node 0).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 4096MB 1: 4096MB
EDAC amd64: MC: 2: 4096MB 3: 4096MB
EDAC amd64: MC: 4: 4096MB 5: 4096MB
EDAC amd64: MC: 6: 4096MB 7: 4096MB
EDAC amd64: CS0: Registered DDR2 RAM
EDAC amd64: CS1: Registered DDR2 RAM
EDAC amd64: CS2: Registered DDR2 RAM
EDAC amd64: CS3: Registered DDR2 RAM
EDAC amd64: CS4: Registered DDR2 RAM
EDAC amd64: CS5: Registered DDR2 RAM
EDAC amd64: CS6: Registered DDR2 RAM
EDAC amd64: CS7: Registered DDR2 RAM
EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
EDAC amd64: DRAM ECC enabled.
EDAC amd64: K8 revF or later detected (node 1).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 4096MB 1: 4096MB
EDAC amd64: MC: 2: 4096MB 3: 4096MB
EDAC amd64: MC: 4: 4096MB 5: 4096MB
EDAC amd64: MC: 6: 4096MB 7: 4096MB
EDAC amd64: CS0: Registered DDR2 RAM
EDAC amd64: CS1: Registered DDR2 RAM
EDAC amd64: CS2: Registered DDR2 RAM
EDAC amd64: CS3: Registered DDR2 RAM
EDAC amd64: CS4: Registered DDR2 RAM
EDAC amd64: CS5: Registered DDR2 RAM
EDAC amd64: CS6: Registered DDR2 RAM
EDAC amd64: CS7: Registered DDR2 RAM
EDAC MC1: Giving out device to module amd64_edac controller K8: DEV 0000:00:19.2 (INTERRUPT)
EDAC amd64: DRAM ECC enabled.
EDAC amd64: K8 revF or later detected (node 2).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 4096MB 1: 4096MB
EDAC amd64: MC: 2: 4096MB 3: 4096MB
EDAC amd64: MC: 4: 4096MB 5: 4096MB
EDAC amd64: MC: 6: 4096MB 7: 4096MB
EDAC amd64: CS0: Registered DDR2 RAM
EDAC amd64: CS1: Registered DDR2 RAM
EDAC amd64: CS2: Registered DDR2 RAM
EDAC amd64: CS3: Registered DDR2 RAM
EDAC amd64: CS4: Registered DDR2 RAM
EDAC amd64: CS5: Registered DDR2 RAM
EDAC amd64: CS6: Registered DDR2 RAM
EDAC amd64: CS7: Registered DDR2 RAM
EDAC MC2: Giving out device to module amd64_edac controller K8: DEV 0000:00:1a.2 (INTERRUPT)
EDAC amd64: DRAM ECC enabled.
EDAC amd64: K8 revF or later detected (node 3).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 4096MB 1: 4096MB
EDAC amd64: MC: 2: 4096MB 3: 4096MB
EDAC amd64: MC: 4: 4096MB 5: 4096MB
EDAC amd64: MC: 6: 4096MB 7: 4096MB
EDAC amd64: CS0: Registered DDR2 RAM
EDAC amd64: CS1: Registered DDR2 RAM
EDAC amd64: CS2: Registered DDR2 RAM
EDAC amd64: CS3: Registered DDR2 RAM
EDAC amd64: CS4: Registered DDR2 RAM
EDAC amd64: CS5: Registered DDR2 RAM
EDAC amd64: CS6: Registered DDR2 RAM
EDAC amd64: CS7: Registered DDR2 RAM
EDAC MC3: Giving out device to module amd64_edac controller K8: DEV 0000:00:1b.2 (INTERRUPT)
EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
random: nonblocking pool is initialized
[drm] Initialized drm 1.1.0 20060810
kvm: Nested Virtualization enabled
ipmi_si 0000:01:04.6: Using irq 16
ipmi_si 0000:01:04.6: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
ipmi_si 0000:01:04.6: IPMI kcs interface initialized
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
powernow_k8: fid 0x18 (3200 MHz), vid 0x7
powernow_k8: fid 0x16 (3000 MHz), vid 0x9
powernow_k8: fid 0x14 (2800 MHz), vid 0xb
powernow_k8: fid 0x12 (2600 MHz), vid 0xd
powernow_k8: fid 0x10 (2400 MHz), vid 0xf
powernow_k8: fid 0xe (2200 MHz), vid 0x11
powernow_k8: fid 0x2 (1000 MHz), vid 0x12
powernow_k8: fid 0x18 (3200 MHz), vid 0x7
powernow_k8: fid 0x16 (3000 MHz), vid 0x9
powernow_k8: fid 0x14 (2800 MHz), vid 0xb
powernow_k8: fid 0x12 (2600 MHz), vid 0xd
powernow_k8: fid 0x10 (2400 MHz), vid 0xf
powernow_k8: fid 0xe (2200 MHz), vid 0x11
powernow_k8: fid 0x2 (1000 MHz), vid 0x12
powernow_k8: fid 0x18 (3200 MHz), vid 0x7
powernow_k8: fid 0x16 (3000 MHz), vid 0x9
powernow_k8: fid 0x14 (2800 MHz), vid 0xb
powernow_k8: fid 0x12 (2600 MHz), vid 0xd
powernow_k8: fid 0x10 (2400 MHz), vid 0xf
powernow_k8: fid 0xe (2200 MHz), vid 0x11
powernow_k8: fid 0x2 (1000 MHz), vid 0x12
powernow_k8: fid 0x18 (3200 MHz), vid 0x7
powernow_k8: fid 0x16 (3000 MHz), vid 0x9
powernow_k8: fid 0x14 (2800 MHz), vid 0xb
powernow_k8: fid 0x12 (2600 MHz), vid 0xd
powernow_k8: fid 0x10 (2400 MHz), vid 0xf
powernow_k8: fid 0xe (2200 MHz), vid 0x11
powernow_k8: fid 0x2 (1000 MHz), vid 0x12
powernow_k8: Found 4 Dual-Core AMD Opteron(tm) Processor 8224 SE (8 cpu cores) (version 2.20.00)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 56
vgaarb: device changed decodes: PCI:0000:46:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:46:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.65 Tue Dec 2 09:50:34 PST 2014
[drm] radeon kernel modesetting enabled.
radeon 0000:01:03.0: enabling device (0180 -> 0183)
ACPI: PCI Interrupt Link [LNKY] enabled at IRQ 18
[drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x103C:0x31FB).
[drm] register mmio base: 0xBFDF0000
[drm] register mmio size: 65536
radeon 0000:01:03.0: Invalid ROM contents
radeon 0000:01:03.0: Invalid ROM contents
[drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
radeon 0000:01:03.0: Card not posted and no BIOS - ignoring
radeon 0000:01:03.0: Fatal error during GPU init
[drm] radeon: finishing device.
[TTM] Memory type 2 has not been initialized
[drm] radeon: cp finalized
radeon: probe of 0000:01:03.0 failed with error -22
Adding 19488764k swap on /dev/mapper/arcadia--vg-swap_1. Priority:-1 extents:1 across:19488764k FS
EXT4-fs (cciss!c0d0p1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (cciss!c0d0p1): mounted filesystem without journal. Opts: (null)
floppy0: no floppy controllers found
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[222]: Received request to flush runtime journal from PID 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
cfg80211: Calling CRDA to update world regulatory domain
bnx2 0000:41:01.0: firmware: direct-loading firmware bnx2/bnx2-mips-06-6.2.3.fw
bnx2 0000:41:01.0: firmware: direct-loading firmware bnx2/bnx2-rv2p-06-6.0.15.fw
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
nvidia 0000:46:00.0: irq 82 for MSI/MSI-X
bnx2 0000:41:02.0 eth1: NIC Copper Link is Up, 100 Mbps full duplex
, receive & transmit flow control ON
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready