dmesg - X7DB8-2xE5420
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-31-generic (buildd@toyol) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #43~14.04.1-Ubuntu SMP Tue Mar 10 20:13:38 UTC 2015 (Ubuntu 3.16.0-31.43~14.04.1-generic 3.16.7-ckt5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000097bff] usable
BIOS-e820: [mem 0x0000000000097c00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000cc000-0x00000000000d3fff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bff4ffff] usable
BIOS-e820: [mem 0x00000000bff50000-0x00000000bff64fff] ACPI data
BIOS-e820: [mem 0x00000000bff65000-0x00000000bff7ffff] ACPI NVS
BIOS-e820: [mem 0x00000000bff80000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000083fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Supermicro X7DB8/X7DB8, BIOS 2.1a 12/20/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x840000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E3FFF uncachable
E4000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 3FC0000000 uncachable
1 base 0000000000 mask 3800000000 write-back
2 base 0800000000 mask 3FC0000000 write-back
3 base 00BFF80000 mask 3FFFF80000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 3GB, range: 1GB, type UC
reg 1, base: 0GB, range: 32GB, type WB
reg 2, base: 32GB, range: 1GB, type WB
reg 3, base: 3145216KB, range: 512KB, type UC
total RAM covered: 32767M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 1M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3145216KB, range: 512KB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 16GB, type WB
reg 6, base: 32GB, range: 1GB, type WB
e820: update [mem 0xbff80000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbff50 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f6150-0x000f615f] mapped at [ffff8800000f6150]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000091000] 91000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fbe000, 0x01fbefff] PGTABLE
BRK [0x01fbf000, 0x01fbffff] PGTABLE
BRK [0x01fc0000, 0x01fc0fff] PGTABLE
init_memory_mapping: [mem 0x83fe00000-0x83fffffff]
[mem 0x83fe00000-0x83fffffff] page 2M
BRK [0x01fc1000, 0x01fc1fff] PGTABLE
init_memory_mapping: [mem 0x83c000000-0x83fdfffff]
[mem 0x83c000000-0x83fdfffff] page 2M
init_memory_mapping: [mem 0x800000000-0x83bffffff]
[mem 0x800000000-0x83bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbff4ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbfdfffff] page 2M
[mem 0xbfe00000-0xbff4ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x7ffffffff]
[mem 0x100000000-0x7ffffffff] page 2M
BRK [0x01fc2000, 0x01fc2fff] PGTABLE
BRK [0x01fc3000, 0x01fc3fff] PGTABLE
RAMDISK: [mem 0x357b4000-0x36bd1fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F6120 000014 (v00 PTLTD )
ACPI: RSDT 0x00000000BFF5E42E 000078 (v01 PTLTD RSDT 06040000 LTP 00000000)
ACPI: FACP 0x00000000BFF643D2 000074 (v01 INTEL TUMWATER 06040000 PTL 00000003)
ACPI: DSDT 0x00000000BFF5FF78 00445A (v01 Intel BLAKFORD 06040000 MSFT 03000001)
ACPI: FACS 0x00000000BFF65FC0 000040
ACPI: APIC 0x00000000BFF64446 0000C8 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: SSDT 0x00000000BFF6450E 0000AF (v05 PTLTD PTL-MI0 06040000 PTEC 00000001)
ACPI: SPMI 0x00000000BFF645BD 000041 (v05 PTLTD PTL-SPMI 06040000 PTL 00000001)
ACPI: MCFG 0x00000000BFF645FE 00003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: BOOT 0x00000000BFF6463A 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SPCR 0x00000000BFF64662 000050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
ACPI: SLIC 0x00000000BFF646B2 000176 (v01 OEMID_ OEMTABLE 06040000 LTP 00000000)
ACPI: ERST 0x00000000BFF64828 000590 (v01 SMCI ERSTTBL 06040000 SMCI 00000001)
ACPI: HEST 0x00000000BFF64DB8 0000A8 (v01 SMCI HESTTBL 06040000 SMCI 00000001)
ACPI: BERT 0x00000000BFF64E60 000030 (v01 SMCI BERTTBL 06040000 SMCI 00000001)
ACPI: EINJ 0x00000000BFF64E90 000170 (v01 SMCI EINJTBL 06040000 SMCI 00000001)
ACPI: SSDT 0x00000000BFF5FD19 00025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
ACPI: SSDT 0x00000000BFF5FC73 0000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
ACPI: SSDT 0x00000000BFF5FBCD 0000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
ACPI: SSDT 0x00000000BFF5FB27 0000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
ACPI: SSDT 0x00000000BFF5FA81 0000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
ACPI: SSDT 0x00000000BFF5F9DB 0000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
ACPI: SSDT 0x00000000BFF5F935 0000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
ACPI: SSDT 0x00000000BFF5F88F 0000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
ACPI: SSDT 0x00000000BFF5E4A6 0013E9 (v01 PmRef CpuPm 00003000 INTL 20050228)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000083fffffff]
Initmem setup node 0 [mem 0x00000000-0x83fffffff]
NODE_DATA [mem 0x83ffde000-0x83ffe2fff]
[ffffea0000000000-ffffea0020ffffff] PMD -> [ffff88081f600000-ffff88083f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x83fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00096fff]
node 0: [mem 0x00100000-0xbff4ffff]
node 0: [mem 0x100000000-0x83fffffff]
On node 0 totalpages: 8388326
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3990 pages, LIFO batch:0
DMA32 zone: 12222 pages used for memmap
DMA32 zone: 782160 pages, LIFO batch:31
Normal zone: 118784 pages used for memmap
Normal zone: 7602176 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x00097000-0x00097fff]
PM: Registered nosave memory: [mem 0x00098000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000cbfff]
PM: Registered nosave memory: [mem 0x000cc000-0x000d3fff]
PM: Registered nosave memory: [mem 0x000d4000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
PM: Registered nosave memory: [mem 0xbff50000-0xbff64fff]
PM: Registered nosave memory: [mem 0xbff65000-0xbff7ffff]
PM: Registered nosave memory: [mem 0xbff80000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88083fc00000 s82304 r8192 d24192 u262144
pcpu-alloc: s82304 r8192 d24192 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8257235
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32924844K/33553304K available (7617K kernel code, 1131K rwdata, 3596K rodata, 1356K init, 1300K bss, 628460K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:1152 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Fast TSC calibration failed
tsc: PIT calibration matches PMTIMER. 1 loops
tsc: Detected 2499.992 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.98 BogoMIPS (lpj=9999968)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 32K (ffffffff81e6f000 - ffffffff81e77000)
ftrace: allocating 29221 entries in 115 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz (fam: 06, model: 17, stepping: 06)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
CPU1: Thermal monitoring handled by SMI
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
CPU2: Thermal monitoring handled by SMI
#3[ 0.204042] CPU3: Thermal monitoring handled by SMI
#4
CPU4: Thermal monitoring handled by SMI
#5
CPU5: Thermal monitoring handled by SMI
#6
CPU6: Thermal monitoring handled by SMI
#7
CPU7: Thermal monitoring handled by SMI
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (40001.64 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbff65000-0xbff7ffff] (110592 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 11:12:47, date: 03/23/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-0a] at [mem 0xe0000000-0xe0afffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe0afffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
\_SB_:_OSC evaluation returned wrong type
_OSC request data:1 1f
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-0a] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
pci 0000:00:00.0: [8086:25d8] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:25f7] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:25f8] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [8086:25f9] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:08.0: [8086:1a38] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xd8b00000-0xd8b003ff 64bit]
pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [8086:25f0] type 00 class 0x060000
pci 0000:00:10.1: [8086:25f0] type 00 class 0x060000
pci 0000:00:10.2: [8086:25f0] type 00 class 0x060000
pci 0000:00:11.0: [8086:25f1] type 00 class 0x060000
pci 0000:00:13.0: [8086:25f3] type 00 class 0x060000
pci 0000:00:15.0: [8086:25f5] type 00 class 0x060000
pci 0000:00:16.0: [8086:25f6] type 00 class 0x060000
pci 0000:00:1c.0: [8086:2690] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x1800-0x181f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x1820-0x183f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x1840-0x185f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xd8b00400-0xd8b007ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.1: [8086:269e] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x20: [io 0x1860-0x186f]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.2: [8086:2682] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0x18a0-0x18a7]
pci 0000:00:1f.2: reg 0x14: [io 0x1874-0x1877]
pci 0000:00:1f.2: reg 0x18: [io 0x1878-0x187f]
pci 0000:00:1f.2: reg 0x1c: [io 0x1870-0x1873]
pci 0000:00:1f.2: reg 0x20: [io 0x1880-0x189f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd8b00800-0xd8b00bff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:269b] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0x1100-0x111f]
pci 0000:01:00.0: [8086:3500] type 01 class 0x060400
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.3: [8086:350c] type 01 class 0x060400
pci 0000:01:00.3: PME# supported from D0 D3hot D3cold
pci 0000:01:00.3: System wakeup disabled by ACPI
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: PCI bridge to [bus 01-07]
pci 0000:00:02.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.0: bridge window [mem 0xd8200000-0xd87fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [8086:3510] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:02:02.0: [8086:3518] type 01 class 0x060400
pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
pci 0000:02:02.0: System wakeup disabled by ACPI
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:01:00.0: PCI bridge to [bus 02-06]
pci 0000:01:00.0: bridge window [io 0x2000-0x2fff]
pci 0000:01:00.0: bridge window [mem 0xd8200000-0xd86fffff]
pci 0000:01:00.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:03:00.0: [8086:0329] type 01 class 0x060400
pci 0000:03:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:03:00.2: [8086:032a] type 01 class 0x060400
pci 0000:03:00.2: PXH quirk detected; SHPC device MSI disabled
pci 0000:03:00.2: PME# supported from D0 D3hot D3cold
pci 0000:03:00.2: System wakeup disabled by ACPI
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:02:00.0: PCI bridge to [bus 03-05]
pci 0000:02:00.0: bridge window [mem 0xd8200000-0xd85fffff]
pci 0000:02:00.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:04:01.0: [9005:0285] type 00 class 0x010400
pci 0000:04:01.0: reg 0x10: [mem 0xd8400000-0xd85fffff 64bit]
pci 0000:04:01.0: reg 0x18: [mem 0xd8200000-0xd83fffff]
pci 0000:04:01.0: reg 0x20: [mem 0xc0000000-0xcfffffff pref]
pci 0000:04:01.0: reg 0x30: [mem 0x00000000-0x00007fff pref]
pci 0000:04:01.0: supports D1
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:00.0: bridge window [mem 0xd8200000-0xd85fffff]
pci 0000:03:00.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:03:00.2: PCI bridge to [bus 05]
pci 0000:06:00.0: [8086:1096] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xd8600000-0xd861ffff]
pci 0000:06:00.0: reg 0x18: [io 0x2000-0x201f]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.1: [8086:1096] type 00 class 0x020000
pci 0000:06:00.1: reg 0x10: [mem 0xd8620000-0xd863ffff]
pci 0000:06:00.1: reg 0x18: [io 0x2020-0x203f]
pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:02:02.0: PCI bridge to [bus 06]
pci 0000:02:02.0: bridge window [io 0x2000-0x2fff]
pci 0000:02:02.0: bridge window [mem 0xd8600000-0xd86fffff]
pci 0000:01:00.3: PCI bridge to [bus 07]
pci 0000:00:04.0: PCI bridge to [bus 08]
pci 0000:00:06.0: PCI bridge to [bus 09]
pci 0000:0a:00.0: [8086:10fb] type 00 class 0x020000
pci 0000:0a:00.0: reg 0x10: [mem 0xd8000000-0xd807ffff 64bit pref]
pci 0000:0a:00.0: reg 0x18: [io 0x3000-0x301f]
pci 0000:0a:00.0: reg 0x20: [mem 0xd8100000-0xd8103fff 64bit pref]
pci 0000:0a:00.0: PME# supported from D0 D3hot
pci 0000:0a:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:0a:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:0a:00.1: [8086:10fb] type 00 class 0x020000
pci 0000:0a:00.1: reg 0x10: [mem 0xd8080000-0xd80fffff 64bit pref]
pci 0000:0a:00.1: reg 0x18: [io 0x3020-0x303f]
pci 0000:0a:00.1: reg 0x20: [mem 0xd8104000-0xd8107fff 64bit pref]
pci 0000:0a:00.1: PME# supported from D0 D3hot
pci 0000:0a:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:0a:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:00:1c.0: PCI bridge to [bus 0a]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xd8000000-0xd81fffff 64bit pref]
pci 0000:00:1c.0: bridge has subordinate 0a but max busn 0b
pci 0000:0b:01.0: [1002:515e] type 00 class 0x030000
pci 0000:0b:01.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
pci 0000:0b:01.0: reg 0x14: [io 0x4000-0x40ff]
pci 0000:0b:01.0: reg 0x18: [mem 0xd8800000-0xd880ffff]
pci 0000:0b:01.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:0b:01.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1e.0: bridge window [mem 0xd8800000-0xd88fffff]
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
vgaarb: setting as boot device: PCI:0000:0b:01.0
vgaarb: device added: PCI:0000:0b:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:0b:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00097c00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbff50000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0295-0x0296] has been reserved
system 00:00: [io 0x0ca0-0x0ca1] has been reserved
system 00:00: [io 0x1000-0x107f] could not be reserved
system 00:00: [io 0x1180-0x11bf] has been reserved
system 00:00: [io 0x0800-0x080f] has been reserved
system 00:00: [io 0xfe00] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] could not be reserved
system 00:00: [mem 0xfec80000-0xfec80fff] could not be reserved
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
system 00:00: [mem 0xfe600000-0xfe6fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: Plug and Play ACPI device, IDs IPI0001 (active)
pnp: PnP ACPI: found 7 devices
ACPI: bus type PNP unregistered
pci_bus 0000:00: max bus depth: 4 pci_try_num: 5
pci 0000:0a:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:0a:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:0a:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:0a:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xd8c00000-0xd8ffffff]
pci 0000:04:01.0: BAR 6: can't assign mem pref (size 0x8000)
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:00.0: bridge window [mem 0xd8200000-0xd85fffff]
pci 0000:03:00.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:03:00.2: PCI bridge to [bus 05]
pci 0000:02:00.0: PCI bridge to [bus 03-05]
pci 0000:02:00.0: bridge window [mem 0xd8200000-0xd85fffff]
pci 0000:02:00.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:02.0: PCI bridge to [bus 06]
pci 0000:02:02.0: bridge window [io 0x2000-0x2fff]
pci 0000:02:02.0: bridge window [mem 0xd8600000-0xd86fffff]
pci 0000:01:00.0: PCI bridge to [bus 02-06]
pci 0000:01:00.0: bridge window [io 0x2000-0x2fff]
pci 0000:01:00.0: bridge window [mem 0xd8200000-0xd86fffff]
pci 0000:01:00.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.3: PCI bridge to [bus 07]
pci 0000:00:02.0: PCI bridge to [bus 01-07]
pci 0000:00:02.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.0: bridge window [mem 0xd8200000-0xd87fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 08]
pci 0000:00:06.0: PCI bridge to [bus 09]
pci 0000:0a:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:0a:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:0a:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:0a:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:0a:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:0a:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:0a:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:0a:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:0a:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:0a:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:0a:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:0a:00.0: BAR 7: assigned [mem 0xd8c00000-0xd8cfffff 64bit]
pci 0000:0a:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:0a:00.0: BAR 10: assigned [mem 0xd8d00000-0xd8dfffff 64bit]
pci 0000:0a:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:0a:00.1: BAR 7: assigned [mem 0xd8e00000-0xd8efffff 64bit]
pci 0000:0a:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:0a:00.1: BAR 10: assigned [mem 0xd8f00000-0xd8ffffff 64bit]
pci 0000:00:1c.0: PCI bridge to [bus 0a]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xd8c00000-0xd8ffffff]
pci 0000:00:1c.0: bridge window [mem 0xd8000000-0xd81fffff 64bit pref]
pci 0000:0b:01.0: BAR 6: assigned [mem 0xd8820000-0xd883ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 0b]
pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1e.0: bridge window [mem 0xd8800000-0xd88fffff]
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 11 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xd8200000-0xd87fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xd8200000-0xd86fffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xd8200000-0xd85fffff]
pci_bus 0000:03: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xd8200000-0xd85fffff]
pci_bus 0000:04: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:06: resource 1 [mem 0xd8600000-0xd86fffff]
pci_bus 0000:0a: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:0a: resource 1 [mem 0xd8c00000-0xd8ffffff]
pci_bus 0000:0a: resource 2 [mem 0xd8000000-0xd81fffff 64bit pref]
pci_bus 0000:0b: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:0b: resource 1 [mem 0xd8800000-0xd88fffff]
pci_bus 0000:0b: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0b: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0b: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0b: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:0b: resource 10 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:0b: resource 11 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
PCI: CLS mismatch (32 != 64), using 64 bytes
pci 0000:03:00.0: rerouting interrupts for [8086:0329]
pci 0000:03:00.2: rerouting interrupts for [8086:032a]
pci 0000:0b:01.0: Video device with shadowed ROM
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20600K (ffff8800357b4000 - ffff880036bd2000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbf50000-0xbff50000] (64MB) mapped at [ffff8800bbf50000-ffff8800bff4ffff]
Simple Boot Flag at 0x38 set to 0x1
microcode: CPU0 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU1 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU2 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU3 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU4 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU5 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU6 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU7 sig=0x10676, pf=0x40, revision=0x60c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1427109167.704:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 32768
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004100000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Can not request [mem 0xbff69000-0xbff69fff] for ERST.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
libphy: Fixed MDIO Bus: probed
ata2: port disabled--ignoring
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 17, io mem 0xd8b00400
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-31-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
tsc: Refined TSC clocksource calibration: 2499.999 MHz
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
usb 1-6: new high-speed USB device number 3 using ehci-pci
uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001800
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb 1-6: New USB device found, idVendor=14dd, idProduct=0002
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: Multidevice
usb 1-6: Manufacturer: Peppercon AG
usb 1-6: SerialNumber: 0785ae017e46a82b7CE4F555C62C01B7
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-31-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
Switched to clocksource tsc
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-31-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-31-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 6a63e8ef0c63abdb145fd17caaa97b8c69734584'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 7:44:227
acpi PNP0200:00: hash matches
memory memory109: hash matches
usb 2-2: new low-speed USB device number 2 using uhci_hcd
usb 2-2: New USB device found, idVendor=04f3, idProduct=0103
usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
rtc_cmos 00:01: setting system clock to 2015-03-23 11:12:50 UTC (1427109170)
[sched_delayed] sched: RT throttling activated
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1356K (ffffffff81d1c000 - ffffffff81e6f000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 564K (ffff880001773000 - ffff880001800000)
Freeing unused kernel memory: 500K (ffff880001b83000 - ffff880001c00000)
systemd-udevd[153]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
md: linear personality registered for level -1
Adaptec aacraid driver 1.2-0[30300]-ms
PTP clock support registered
aacraid 0000:04:01.0: PCI IRQ 16 -> rerouted to legacy IRQ 16
AAC0: kernel 5.1-0[8464] Oct 18 2007
AAC0: monitor 5.1-0[8464]
AAC0: bios 5.1-0[8464]
AAC0: 64bit support enabled.
AAC0: 64 Bit DAC enabled
scsi2 : aacraid
dca service started, version 1.12.1
scsi 2:0:0:0: Direct-Access Adaptec HDD3 V1.0 PQ: 0 ANSI: 2
scsi 2:0:1:0: Direct-Access Adaptec HDD1 V1.0 PQ: 0 ANSI: 2
scsi 2:0:2:0: Direct-Access Adaptec HDD2 V1.0 PQ: 0 ANSI: 2
scsi 2:0:3:0: Direct-Access Adaptec HDD0 V1.0 PQ: 0 ANSI: 2
scsi 2:0:4:0: Direct-Access Adaptec SSD0 V1.0 PQ: 0 ANSI: 2
scsi 2:0:5:0: Direct-Access Adaptec SSD1 V1.0 PQ: 0 ANSI: 2
md: multipath personality registered for level -4
scsi 2:0:6:0: Direct-Access Adaptec SSD2 V1.0 PQ: 0 ANSI: 2
hidraw: raw HID events driver (C) Jiri Kosina
md: raid0 personality registered for level 0
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports ? Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit led
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
ata3: SATA max UDMA/133 abar m1024@0xd8b00800 port 0xd8b00900 irq 19
ata4: SATA max UDMA/133 abar m1024@0xd8b00800 port 0xd8b00980 irq 19
ata5: SATA max UDMA/133 abar m1024@0xd8b00800 port 0xd8b00a00 irq 19
ata6: SATA max UDMA/133 abar m1024@0xd8b00800 port 0xd8b00a80 irq 19
ata7: SATA max UDMA/133 abar m1024@0xd8b00800 port 0xd8b00b00 irq 19
ata8: SATA max UDMA/133 abar m1024@0xd8b00800 port 0xd8b00b80 irq 19
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:06:00.0: irq 65 for MSI/MSI-X
md: raid1 personality registered for level 1
scsi 2:1:0:0: Direct-Access WDC WD10EFRX-68PJCN0 82.0 PQ: 0 ANSI: 5
scsi 2:1:1:0: Direct-Access WDC WD10EFRX-68PJCN0 82.0 PQ: 0 ANSI: 5
e1000e 0000:06:00.0 eth0: (PCI Express:2.5GT/s:Width x4) 00:30:48:32:cf:ca
e1000e 0000:06:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:06:00.0 eth0: MAC: 5, PHY: 5, PBA No: FFFFFF-0FF
e1000e 0000:06:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:06:00.1: irq 66 for MSI/MSI-X
e1000e 0000:06:00.1 eth1: (PCI Express:2.5GT/s:Width x4) 00:30:48:32:cf:cb
e1000e 0000:06:00.1 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:06:00.1 eth1: MAC: 5, PHY: 5, PBA No: FFFFFF-0FF
ata5: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.19.1-k
ixgbe: Copyright (c) 1999-2014 Intel Corporation.
scsi 2:1:2:0: Direct-Access WDC WD10EFRX-68PJCN0 82.0 PQ: 0 ANSI: 5
scsi 2:1:3:0: Direct-Access WDC WD10EFRX-68PJCN0 82.0 PQ: 0 ANSI: 5
input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/0003:14DD:0002.0001/input/input5
scsi 2:1:4:0: Direct-Access INTEL SSDSC2BA200G3 5DV1 PQ: 0 ANSI: 5
raid6: sse2x1 3014 MB/s
raid6: sse2x2 6252 MB/s
scsi 2:1:5:0: Direct-Access INTEL SSDSC2BA200G3 5DV1 PQ: 0 ANSI: 5
hid-generic 0003:14DD:0002.0001: input,hidraw0: USB HID v1.01 Mouse [Peppercon AG Multidevice] on usb-0000:00:1d.7-6/input0
input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.1/0003:14DD:0002.0002/input/input6
raid6: sse2x4 6951 MB/s
raid6: using algorithm sse2x4 (6951 MB/s)
raid6: using ssse3x2 recovery algorithm
hid-generic 0003:14DD:0002.0002: input,hidraw1: USB HID v1.01 Keyboard [Peppercon AG Multidevice] on usb-0000:00:1d.7-6/input1
input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/0003:04F3:0103.0003/input/input7
hid-generic 0003:04F3:0103.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 04f3:0103] on usb-0000:00:1d.0-2/input0
floppy0: no floppy controllers found
work still pending
input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/0003:04F3:0103.0004/input/input8
hid-generic 0003:04F3:0103.0004: input,hidraw3: USB HID v1.11 Device [HID 04f3:0103] on usb-0000:00:1d.0-2/input1
xor: measuring software checksum speed
scsi 2:1:6:0: Direct-Access INTEL SSDSC2BA200G3 5DV1 PQ: 0 ANSI: 5
prefetch64-sse: 10229.000 MB/sec
generic_sse: 9036.000 MB/sec
xor: using function: prefetch64-sse (10229.000 MB/sec)
ixgbe 0000:0a:00.0: irq 67 for MSI/MSI-X
ixgbe 0000:0a:00.0: irq 68 for MSI/MSI-X
ixgbe 0000:0a:00.0: irq 69 for MSI/MSI-X
ixgbe 0000:0a:00.0: irq 70 for MSI/MSI-X
ixgbe 0000:0a:00.0: irq 71 for MSI/MSI-X
ixgbe 0000:0a:00.0: irq 72 for MSI/MSI-X
ixgbe 0000:0a:00.0: irq 73 for MSI/MSI-X
ixgbe 0000:0a:00.0: irq 74 for MSI/MSI-X
ixgbe 0000:0a:00.0: irq 75 for MSI/MSI-X
ixgbe 0000:0a:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8
ixgbe 0000:0a:00.0: PCI Express bandwidth of 8GT/s available
ixgbe 0000:0a:00.0: (Speed:2.5GT/s, Width: x4, Encoding Loss:20%)
ixgbe 0000:0a:00.0: This is not sufficient for optimal performance of this card.
ixgbe 0000:0a:00.0: For optimal performance, at least 10GT/s of bandwidth is required.
ixgbe 0000:0a:00.0: A slot with more lanes and/or higher speed is suggested.
ixgbe 0000:0a:00.0: MAC: 2, PHY: 1, PBA No: E68793-005
ixgbe 0000:0a:00.0: 90:e2:ba:3d:a0:f4
ixgbe 0000:0a:00.0: Intel(R) 10 Gigabit Network Connection
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
scsi 2:3:0:0: Enclosure AMI MG9072 0003 PQ: 0 ANSI: 5
ixgbe 0000:0a:00.1: irq 76 for MSI/MSI-X
ixgbe 0000:0a:00.1: irq 77 for MSI/MSI-X
ixgbe 0000:0a:00.1: irq 78 for MSI/MSI-X
ixgbe 0000:0a:00.1: irq 79 for MSI/MSI-X
ixgbe 0000:0a:00.1: irq 80 for MSI/MSI-X
ixgbe 0000:0a:00.1: irq 81 for MSI/MSI-X
ixgbe 0000:0a:00.1: irq 82 for MSI/MSI-X
ixgbe 0000:0a:00.1: irq 83 for MSI/MSI-X
ixgbe 0000:0a:00.1: irq 84 for MSI/MSI-X
ixgbe 0000:0a:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8
ixgbe 0000:0a:00.1: PCI Express bandwidth of 8GT/s available
ixgbe 0000:0a:00.1: (Speed:2.5GT/s, Width: x4, Encoding Loss:20%)
ixgbe 0000:0a:00.1: This is not sufficient for optimal performance of this card.
ixgbe 0000:0a:00.1: For optimal performance, at least 10GT/s of bandwidth is required.
ixgbe 0000:0a:00.1: A slot with more lanes and/or higher speed is suggested.
ixgbe 0000:0a:00.1: MAC: 2, PHY: 1, PBA No: E68793-005
ixgbe 0000:0a:00.1: 90:e2:ba:3d:a0:f5
ixgbe 0000:0a:00.1: Intel(R) 10 Gigabit Network Connection
scsi 2:3:1:0: Enclosure AMI MG9072 0003 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 1953157120 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 06 00 10 00
sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 2:0:1:0: [sdb] 1953157120 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 06 00 10 00
sd 2:0:1:0: Attached scsi generic sg1 type 0
sd 2:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 2:0:2:0: Attached scsi generic sg2 type 0
sd 2:0:2:0: [sdc] 1953157120 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:2:0: [sdc] Write Protect is off
sd 2:0:2:0: [sdc] Mode Sense: 06 00 10 00
sd 2:0:3:0: [sdd] 1953157120 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 2:0:3:0: [sdd] Write Protect is off
sd 2:0:3:0: [sdd] Mode Sense: 06 00 10 00
sd 2:0:3:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 2:0:3:0: Attached scsi generic sg3 type 0
sd 2:0:4:0: [sde] 390328320 512-byte logical blocks: (199 GB/186 GiB)
sd 2:0:4:0: [sde] Write Protect is off
sd 2:0:4:0: [sde] Mode Sense: 06 00 10 00
sd 2:0:4:0: Attached scsi generic sg4 type 0
sd 2:0:4:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 2:0:5:0: [sdf] 390328320 512-byte logical blocks: (199 GB/186 GiB)
sd 2:0:5:0: [sdf] Write Protect is off
sd 2:0:5:0: [sdf] Mode Sense: 06 00 10 00
sd 2:0:5:0: Attached scsi generic sg5 type 0
sd 2:0:5:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 2:0:6:0: [sdg] 390328320 512-byte logical blocks: (199 GB/186 GiB)
sd 2:0:6:0: Attached scsi generic sg6 type 0
sd 2:0:6:0: [sdg] Write Protect is off
sd 2:0:6:0: [sdg] Mode Sense: 06 00 10 00
sd 2:0:6:0: [sdg] Write cache: disabled, read cache: enabled, supports DPO and FUA
scsi 2:1:0:0: Attached scsi generic sg7 type 0
scsi 2:1:1:0: Attached scsi generic sg8 type 0
scsi 2:1:2:0: Attached scsi generic sg9 type 0
scsi 2:1:3:0: Attached scsi generic sg10 type 0
scsi 2:1:4:0: Attached scsi generic sg11 type 0
scsi 2:1:5:0: Attached scsi generic sg12 type 0
sda: sda1 sda2 sda3
scsi 2:1:6:0: Attached scsi generic sg13 type 0
scsi 2:3:0:0: Attached scsi generic sg14 type 13
sd 2:0:0:0: [sda] Attached SCSI removable disk
scsi 2:3:1:0: Attached scsi generic sg15 type 13
random: nonblocking pool is initialized
sdb: unknown partition table
sd 2:0:1:0: [sdb] Attached SCSI removable disk
sdd: unknown partition table
sdc: unknown partition table
sde: unknown partition table
sd 2:0:4:0: [sde] Attached SCSI removable disk
sd 2:0:3:0: [sdd] Attached SCSI removable disk
sd 2:0:2:0: [sdc] Attached SCSI removable disk
sdf: unknown partition table
sd 2:0:5:0: [sdf] Attached SCSI removable disk
sdg: unknown partition table
sd 2:0:6:0: [sdg] Attached SCSI removable disk
Btrfs loaded
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
ses 2:3:0:0: Attached Enclosure device
ses 2:3:1:0: Attached Enclosure device
Adding 3905532k swap on /dev/sda1. Priority:-1 extents:1 across:3905532k FS
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
XFS (sdb): Mounting V4 Filesystem
XFS (sdb): Ending clean mount
XFS (sdc): Mounting V4 Filesystem
XFS (sdc): Ending clean mount
XFS (sdd): Mounting V4 Filesystem
XFS (sdd): Ending clean mount
systemd-udevd[512]: starting version 204
lp: driver loaded but no devices found
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:06: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
EDAC MC: Ver: 3.0.0
Intel 82802 RNG detected
ioatdma: Intel(R) QuickData Technology Driver 4.00
ioatdma 0000:00:08.0: irq 85 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
checking generic (d0000000 300000) vs hw (d0000000 8000000)
fb: switching to radeondrmfb from VESA VGA
Console: switching to colour dummy device 80x25
EDAC MC0: Giving out device to module i5000_edac.c controller I5000: DEV 0000:00:10.0 (POLLED)
EDAC PCI0: Giving out device to module i5000_edac controller EDAC PCI controller: DEV 0000:00:10.0 (POLLED)
[drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x15D9:0x8080).
[drm] register mmio base: 0xD8800000
[drm] register mmio size: 65536
radeon 0000:0b:01.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (16M used)
radeon 0000:0b:01.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone kernel: Available graphics memory: 16473948 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 16M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
ppdev: user-space parallel port driver
gpio_ich: ACPI BAR is busy, GPI 0 - 15 unavailable
gpio_ich: GPIO from 206 to 255 on gpio_ich
[drm] PCI GART of 512M enabled (table at 0x0000000036580000).
radeon 0000:0b:01.0: WB disabled
radeon 0000:0b:01.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff8800bb10f000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Loading R100 Microcode
ipmi_si 00:06: Found new BMC (man_id: 0x0028c5, prod_id: 0x0004, dev_id: 0x22)
ipmi_si 00:06: IPMI kcs interface initialized
[drm] radeon: ring at 0x00000000B0001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] No TV DAC info found in BIOS
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] DVI-I-1
[drm] HPD2
[drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[drm] Encoders:
[drm] CRT2: INTERNAL_DAC2
[drm] DFP2: INTERNAL_DVO1
[drm] fb mappable at 0xD0040000
[drm] vram apper at 0xD0000000
[drm] size 786432
[drm] fb depth is 8
[drm] pitch is 1024
fbcon: radeondrmfb (fb0) is primary device
audit: type=1400 audit(1427109189.684:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=764 comm="apparmor_parser"
audit: type=1400 audit(1427109189.684:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=764 comm="apparmor_parser"
audit: type=1400 audit(1427109189.684:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=764 comm="apparmor_parser"
audit: type=1400 audit(1427109189.684:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=766 comm="apparmor_parser"
audit: type=1400 audit(1427109189.684:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=766 comm="apparmor_parser"
audit: type=1400 audit(1427109189.684:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=766 comm="apparmor_parser"
audit: type=1400 audit(1427109189.684:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=764 comm="apparmor_parser"
audit: type=1400 audit(1427109189.684:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=764 comm="apparmor_parser"
audit: type=1400 audit(1427109189.684:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=766 comm="apparmor_parser"
audit: type=1400 audit(1427109189.684:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=766 comm="apparmor_parser"
Console: switching to colour frame buffer device 128x48
radeon 0000:0b:01.0: fb0: radeondrmfb frame buffer device
radeon 0000:0b:01.0: registered panic notifier
[drm] Initialized radeon 2.39.0 20080528 for 0000:0b:01.0 on minor 0
e1000e 0000:06:00.0: irq 65 for MSI/MSI-X
enhanceio: module verification failed: signature and/or required key missing - tainting kernel
register_policy: policy 1 added
register_policy: policy 2 added[ 22.192073] e1000e 0000:06:00.0: irq 65 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
register_policy: policy 3 added
enhanceio: Slow (clean) shutdown detectedenhanceio: Only clean blocks exist in cache
get_policy: policy 2 foundenhanceio_lru: eio_lru_instance_init: created new instance of LRU
enhanceio: Setting replacement policy to lru (2)enhanceio: Allocate 189845KB (4B per) mem for 48600320-entry cache (capacity:190586MB, associativity:256, block size:4096 bytes)
enhanceio: Slow (clean) shutdown detectedenhanceio: Only clean blocks exist in cache
get_policy: policy 2 foundenhanceio_lru: eio_lru_instance_init: created new instance of LRU
enhanceio: Setting replacement policy to lru (2)enhanceio: Allocate 189845KB (4B per) mem for 48600320-entry cache (capacity:190586MB, associativity:256, block size:4096 bytes)
enhanceio: Slow (clean) shutdown detectedenhanceio: Only clean blocks exist in cache
get_policy: policy 2 foundenhanceio_lru: eio_lru_instance_init: created new instance of LRU
enhanceio: Setting replacement policy to lru (2)enhanceio: Allocate 189845KB (4B per) mem for 48600320-entry cache (capacity:190586MB, associativity:256, block size:4096 bytes)
enhanceio: Slow (clean) shutdown detected
enhanceio: Only clean blocks exist in cache
get_policy: policy 2 found
enhanceio_lru: eio_lru_instance_init: created new instance of LRU
enhanceio: Setting replacement policy to lru (2)
enhanceio: Allocate 189845KB (4B per) mem for 48600320-entry cache (capacity:190586MB, associativity:256, block size:4096 bytes)
init: failsafe main process (824) killed by TERM signal
floppy0: no floppy controllers found
work still pending
init: plymouth-upstart-bridge main process ended, respawning
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
enhanceio: Cache metadata loaded from disk with 0 valid 0 dirty blocks
enhanceio: Setting mode to read only enhanceio_lru: Initialized 189845 sets in LRU
enhanceio: Cache metadata loaded from disk with 0 valid 0 dirty blocksenhanceio: Setting mode to read only
enhanceio_lru: Initialized 189845 sets in LRUenhanceio: Cache metadata loaded from disk with 0 valid 0 dirty blocks
enhanceio: Setting mode to read only enhanceio: Cache metadata loaded from disk with 0 valid 0 dirty blocks
enhanceio: Setting mode to read only enhanceio_lru: Initialized 189845 sets in LRU
enhanceio_lru: Initialized 189845 sets in LRU[ 37.859794] ------------[ cut here ]------------
WARNING: CPU: 0 PID: 752 at /build/buildd/linux-lts-utopic-3.16.0/fs/proc/generic.c:315 proc_register+0xc0/0x140()
proc_dir_entry 'enhanceio/cache0' already registered
Modules linked in: enhanceio_rand(OE) enhanceio_lru(OE) enhanceio_fifo(OE) enhanceio(OE) gpio_ich ppdev coretemp kvm_intel radeon kvm serio_raw joydev ttm drm_kms_helper i5000_edac drm lpc_ich i2c_algo_bit intel_rng edac_core ioatdma i5k_amb parport_pc ipmi_si ipmi_msghandler mac_hid shpchp lp parport xfs libcrc32c btrfs ses enclosure raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq hid_generic raid1 usbhid ixgbe ahci raid0 e1000e multipath dca libahci ptp psmouse pata_acpi aacraid hid mdio linear pps_core
CPU: 0 PID: 752 Comm: eio_cli Tainted: G OE 3.16.0-31-generic #43~14.04.1-Ubuntu
Hardware name: Supermicro X7DB8/X7DB8, BIOS 2.1a 12/20/2008
0000000000000009 ffff88081268bc78 ffffffff81762f10 ffff88081268bcc0
ffff88081268bcb0 ffffffff8106dd6d ffff880811a34e00 ffff88081279b075
ffff88081279b000 ffff8800bbab0d80 ffff880811a34e00 ffff88081268bd10
Call Trace:
[] dump_stack+0x45/0x56
[] warn_slowpath_common+0x7d/0xa0
[] warn_slowpath_fmt+0x4c/0x50
[] ? proc_alloc_inum+0x36/0x140
[] proc_register+0xc0/0x140
[] proc_mkdir_data+0x52/0x80
[] proc_mkdir+0x15/0x20
[] eio_procfs_ctr+0x2e/0x220 [enhanceio]
[] eio_cache_create+0x1104/0x1760 [enhanceio]
[] eio_ioctl+0x2cf/0x2f0 [enhanceio]
[] do_vfs_ioctl+0x2e0/0x4c0
[] SyS_ioctl+0x81/0xa0
[] system_call_fastpath+0x1a/0x1f
---[ end trace 9dba3716d6df40d2 ]---
sysctl duplicate entry: /dev/enhanceio/cache0//zero_stats
CPU: 0 PID: 752 Comm: eio_cli Tainted: G W OE 3.16.0-31-generic #43~14.04.1-Ubuntu
Hardware name: Supermicro X7DB8/X7DB8, BIOS 2.1a 12/20/2008
ffff880811509c00 ffff88081268bcb8 ffffffff81762f10 ffff880810587780
ffff88081268bd20 ffffffff8124302c 0000000000000000 ffff88081268bcf8
ffffffff812413a1 ffff880810587780 ffff880811509c00 ffff880811509c00
Call Trace:
[] dump_stack+0x45/0x56
[] __register_sysctl_table+0x42c/0x5a0
[] ? count_subheaders+0x31/0x70
[] __register_sysctl_paths+0x19d/0x1c0
[] ? eio_cons_sysctl_devname+0x32/0x70 [enhanceio]
[] register_sysctl_table+0x1f/0x30
[] eio_procfs_ctr+0x18f/0x220 [enhanceio]
[] eio_cache_create+0x1104/0x1760 [enhanceio]
[] eio_ioctl+0x2cf/0x2f0 [enhanceio]
[] do_vfs_ioctl+0x2e0/0x4c0
[] SyS_ioctl+0x81/0xa0
[] system_call_fastpath+0x1a/0x1f
Failed to register common sysctl
cache_create: A partition of this device is already cached.
perf interrupt took too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 50000