dmesg - 32g-tmpfs
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-30-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #40~14.04.1-Ubuntu SMP Thu Jan 15 17:43:14 UTC 2015 (Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000be11afff] usable
BIOS-e820: [mem 0x00000000be11b000-0x00000000be4eafff] reserved
BIOS-e820: [mem 0x00000000be4eb000-0x00000000be8d2fff] ACPI NVS
BIOS-e820: [mem 0x00000000be8d3000-0x00000000bee60fff] reserved
BIOS-e820: [mem 0x00000000bee61000-0x00000000bee61fff] usable
BIOS-e820: [mem 0x00000000bee62000-0x00000000bf067fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf068000-0x00000000bf462fff] usable
BIOS-e820: [mem 0x00000000bf463000-0x00000000bf7f2fff] reserved
BIOS-e820: [mem 0x00000000bf7f3000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000053fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./970 Pro3 R2.0, BIOS P1.50 10/02/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x540000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CDFFF write-protect
CE000-EAFFF uncachable
EB000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BF800000 mask FFFFFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000540000000 aka 21504M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
total RAM covered: 3064M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd880-0x000fd88f] mapped at [ffff8800000fd880]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fbe000, 0x01fbefff] PGTABLE
BRK [0x01fbf000, 0x01fbffff] PGTABLE
BRK [0x01fc0000, 0x01fc0fff] PGTABLE
init_memory_mapping: [mem 0x53fe00000-0x53fffffff]
[mem 0x53fe00000-0x53fffffff] page 1G
init_memory_mapping: [mem 0x53c000000-0x53fdfffff]
[mem 0x53c000000-0x53fdfffff] page 1G
init_memory_mapping: [mem 0x500000000-0x53bffffff]
[mem 0x500000000-0x53bffffff] page 1G
init_memory_mapping: [mem 0x00100000-0xbe11afff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xbdffffff] page 2M
[mem 0xbe000000-0xbe11afff] page 4k
init_memory_mapping: [mem 0xbee61000-0xbee61fff]
[mem 0xbee61000-0xbee61fff] page 4k
BRK [0x01fc1000, 0x01fc1fff] PGTABLE
init_memory_mapping: [mem 0xbf068000-0xbf462fff]
[mem 0xbf068000-0xbf1fffff] page 4k
[mem 0xbf200000-0xbf3fffff] page 2M
[mem 0xbf400000-0xbf462fff] page 4k
BRK [0x01fc2000, 0x01fc2fff] PGTABLE
BRK [0x01fc3000, 0x01fc3fff] PGTABLE
init_memory_mapping: [mem 0xbf7f3000-0xbf7fffff]
[mem 0xbf7f3000-0xbf7fffff] page 4k
init_memory_mapping: [mem 0x100001000-0x4ffffffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x4ffffffff] page 1G
RAMDISK: [mem 0x35a06000-0x36cfafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BE8C4070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BE8CA040 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140424/tbfadt-649)
ACPI: DSDT 0x00000000BE8C4160 005EDF (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000BE8CC080 000040
ACPI: APIC 0x00000000BE8CA150 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BE8CA1D0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BE8CA218 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: AAFT 0x00000000BE8CA258 000062 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 0x00000000BE8CA2C0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000BE8CA2F8 0008BC (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000053fffffff]
Initmem setup node 0 [mem 0x00000000-0x53fffffff]
NODE_DATA [mem 0x53fff6000-0x53fffafff]
[ffffea0000000000-ffffea0014ffffff] PMD -> [ffff88052b600000-ffff88053f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x53fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xbe11afff]
node 0: [mem 0xbee61000-0xbee61fff]
node 0: [mem 0xbf068000-0xbf462fff]
node 0: [mem 0xbf7f3000-0xbf7fffff]
node 0: [mem 0x100001000-0x53fffffff]
On node 0 totalpages: 5235904
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12117 pages used for memmap
DMA32 zone: 775460 pages, LIFO batch:31
Normal zone: 69632 pages used for memmap
Normal zone: 4456447 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 6, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbe11b000-0xbe4eafff]
PM: Registered nosave memory: [mem 0xbe4eb000-0xbe8d2fff]
PM: Registered nosave memory: [mem 0xbe8d3000-0xbee60fff]
PM: Registered nosave memory: [mem 0xbee62000-0xbf067fff]
PM: Registered nosave memory: [mem 0xbf463000-0xbf7f2fff]
PM: Registered nosave memory: [mem 0xbf800000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xbf800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88053fc00000 s82304 r8192 d24192 u524288
pcpu-alloc: s82304 r8192 d24192 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 5154070
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0xb4000000-0xb5ffffff] (32MB)
Aperture pointing to e820 RAM. Ignoring.
AGP: Your BIOS doesn't leave a aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
Memory: 20447960K/20943616K available (7615K kernel code, 1131K rwdata, 3596K rodata, 1356K init, 1300K bss, 495656K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:1024 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 83886080 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2741.578 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5483.15 BogoMIPS (lpj=10966312)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
tseg: 00bf800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6f000 - ffffffff81e77000)
ftrace: allocating 29209 entries in 115 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) II X4 635 Processor (fam: 10, model: 05, stepping: 02)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (21932.62 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbe4eb000-0xbe8d2fff] (4096000 bytes)
PM: Registering ACPI NVS region [mem 0xbee62000-0xbf067fff] (2121728 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 15:52:08, date: 03/11/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [d000, ffff]
TOM: 00000000c0000000 aka 3072M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [c0000000, fef0ffff] ==> [c0000000, dfffffff] and [f0000000, fef0ffff]
TOM2: 0000000540000000 aka 21504M
bus: [bus 00-1f] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xc0000000-0xdfffffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x540000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfd207000-0xfd2073ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfd206000-0xfd206fff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfd205000-0xfd2050ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfd204000-0xfd204fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfd203000-0xfd2030ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfd202000-0xfd202fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
pci 0000:00:15.3: supports D1 D2
pci 0000:00:15.3: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfd201000-0xfd201fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfd200000-0xfd2000ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [10de:06e0] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfcffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfd000000-0xfd01ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfd0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [1b6f:7052] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfd100000-0xfd107fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0: bridge window [mem 0xfd100000-0xfd1fffff]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:05:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.3: PCI bridge to [bus 05]
pci 0000:00:15.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.3: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbe11b000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbee62000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf463000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] could not be reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfd0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0: bridge window [mem 0xfd100000-0xfd1fffff]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci 0000:00:15.0: PCI bridge to [bus 04]
pci 0000:00:15.3: PCI bridge to [bus 05]
pci 0000:00:15.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.3: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfd0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfd100000-0xfd1fffff]
pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19412K (ffff880035a06000 - ffff880036cfb000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ b4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
microcode: CPU0: patch_level=0x010000c6
microcode: CPU1: patch_level=0x010000c6
microcode: CPU2: patch_level=0x010000c6
microcode: CPU3: patch_level=0x010000c6
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1426089128.800:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 32768
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90013600000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfd205000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-30-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfd203000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-30-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfd200000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-30-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfd206000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.16.0-30-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfd204000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.16.0-30-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfd202000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.16.0-30-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 18, io mem 0xfd201000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.16.0-30-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.16.0-30-generic xhci_hcd
usb usb8: SerialNumber: 0000:02:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 4 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.16.0-30-generic xhci_hcd
usb usb9: SerialNumber: 0000:02:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 7be2a7200f17f00ca011f70e5a874c37e3e0f6be'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 7:736:891
rtc_cmos 00:03: setting system clock to 2015-03-11 15:52:09 UTC (1426089129)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1356K (ffffffff81d1c000 - ffffffff81e6f000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 564K (ffff880001773000 - ffff880001800000)
Freeing unused kernel memory: 500K (ffff880001b83000 - ffff880001c00000)
systemd-udevd[115]: starting version 204
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfd207000 port 0xfd207100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfd207000 port 0xfd207180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfd207000 port 0xfd207200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfd207000 port 0xfd207280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfd207000 port 0xfd207300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfd207000 port 0xfd207380 irq 19
r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:05:00.0: irq 73 for MSI/MSI-X
r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000316e000, bc:5f:f4:e8:e1:a8, XID 0c900800 IRQ 73
r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
systemd-udevd[117]: renamed network interface eth0 to p17p1
tsc: Refined TSC clocksource calibration: 2741.415 MHz
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata4.00: ATA-8: KINGSTON SV300S37A60G, 525ABBF0, max UDMA/133
ata4.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-7: ST3120813AS, 2AAA, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3120813AS 2AAA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 0001 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 3:0:0:0: [sdc] Attached SCSI disk
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
raid6: sse2x1 3749 MB/s
raid6: sse2x2 5360 MB/s
raid6: sse2x4 6639 MB/s
raid6: using algorithm sse2x4 (6639 MB/s)
raid6: using intx1 recovery algorithm
Switched to clocksource tsc
xor: measuring software checksum speed
prefetch64-sse: 11227.000 MB/sec
generic_sse: 10610.000 MB/sec
xor: using function: prefetch64-sse (11227.000 MB/sec)
Btrfs loaded
random: nonblocking pool is initialized
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): 1 orphan inode deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 3906556k swap on /dev/sda2. Priority:-1 extents:1 across:3906556k FS
systemd-udevd[377]: starting version 204
lp: driver loaded but no devices found
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc9000316ab00). heartbeat=60 sec (nowayout=0)
wmi: Mapper loaded
checking generic (fb000000 130000) vs hw (c0000000 10000000)
checking generic (fb000000 130000) vs hw (fa000000 2000000)
fb: switching to nouveaufb from VESA VGA
Console: switching to colour dummy device 80x25
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x298000a2
nouveau [ DEVICE][0000:01:00.0] Chipset: G98 (NV98)
nouveau [ DEVICE][0000:01:00.0] Family : NV50
nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 62.98.1b.00.11
nouveau 0000:01:00.0: irq 74 for MSI/MSI-X
nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
nouveau [ PFB][0000:01:00.0] RAM type: DDR2
nouveau [ PFB][0000:01:00.0] RAM size: 256 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
audit: type=1400 audit(1426089140.289:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=454 comm="apparmor_parser"
audit: type=1400 audit(1426089140.289:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=454 comm="apparmor_parser"
audit: type=1400 audit(1426089140.289:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=454 comm="apparmor_parser"
audit: type=1400 audit(1426089140.289:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=423 comm="apparmor_parser"
audit: type=1400 audit(1426089140.289:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=423 comm="apparmor_parser"
audit: type=1400 audit(1426089140.289:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=423 comm="apparmor_parser"
audit: type=1400 audit(1426089140.293:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=454 comm="apparmor_parser"
audit: type=1400 audit(1426089140.293:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=454 comm="apparmor_parser"
audit: type=1400 audit(1426089140.293:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=423 comm="apparmor_parser"
audit: type=1400 audit(1426089140.293:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=423 comm="apparmor_parser"
r8169 0000:05:00.0 p17p1: link down
r8169 0000:05:00.0 p17p1: link down
IPv6: ADDRCONF(NETDEV_UP): p17p1: link is not ready
nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
nouveau [ CLK][0000:01:00.0] 0f: core 540 MHz shader 1300 MHz memory 500 MHz
nouveau [ CLK][0000:01:00.0] --: core 540 MHz shader 1300 MHz memory 499 MHz
[TTM] Zone kernel: Available graphics memory: 10267888 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 256 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000300 00000028
nouveau [ DRM] DCB outp 01: 01000302 00020010
nouveau [ DRM] DCB outp 02: 04011310 00000028
nouveau [ DRM] DCB outp 03: 02011312 00020010
nouveau [ DRM] DCB conn 00: 00001030
nouveau [ DRM] DCB conn 01: 00002130
nouveau [ DRM] DCB conn 05: 00000000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau [ DRM] MM: using M2MF for buffer copies
nouveau 0000:01:00.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff88051f3b5c00
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
r8169 0000:05:00.0 p17p1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): p17p1: link becomes ready
Bridge firewalling registered
device p17p1 entered promiscuous mode
br0: port 1(p17p1) entered forwarding state
br0: port 1(p17p1) entered forwarding state
init: avahi-cups-reload main process (988) terminated with status 1
init: failsafe main process (847) killed by TERM signal
audit_printk_skb: 15 callbacks suppressed
audit: type=1400 audit(1426089149.212:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd" pid=1162 comm="apparmor_parser"
audit: type=1400 audit(1426089149.212:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/libvirt/virt-aa-helper" pid=1161 comm="apparmor_parser"
audit: type=1400 audit(1426089149.212:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1160 comm="apparmor_parser"
audit: type=1400 audit(1426089149.212:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1160 comm="apparmor_parser"
audit: type=1400 audit(1426089149.212:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1160 comm="apparmor_parser"
audit: type=1400 audit(1426089149.216:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1160 comm="apparmor_parser"
audit: type=1400 audit(1426089149.216:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1160 comm="apparmor_parser"
audit: type=1400 audit(1426089149.216:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1160 comm="apparmor_parser"
audit: type=1400 audit(1426089149.216:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/ntpd" pid=1163 comm="apparmor_parser"
audit: type=1400 audit(1426089149.216:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1165 comm="apparmor_parser"
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
XFS (sdb1): Mounting V4 Filesystem
XFS (sdb1): Starting recovery (logdev: internal)
XFS (sdb1): Ending recovery (logdev: internal)
init: ceph-osd-all-starter main process (1253) terminated with status 1
XFS (sdb1): Mounting V4 Filesystem
XFS (sdb1): Ending clean mount
init: plymouth-upstart-bridge main process ended, respawning
Ebtables v2.0 registered
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
audit: type=1400 audit(1426089156.172:27): apparmor="DENIED" operation="open" profile="/usr/sbin/ntpd" name="/etc/leap.seconds" pid=1811 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
audit: type=1400 audit(1426089156.964:28): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirt-78e2c5dc-814f-6f7b-6e58-c81884bf94ea" pid=1888 comm="apparmor_parser"
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entered forwarding state
br0: port 2(vnet0) entered forwarding state
cgroup: libvirtd (1586) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: "memory" requires setting use_hierarchy to 1 on the root
kvm: zapping shadow pages for mmio generation wraparound
audit: type=1400 audit(1426089157.604:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirt-55afccc2-d056-45f2-95ec-1bfef7bb6d96" pid=1922 comm="apparmor_parser"
device vnet1 entered promiscuous mode
br0: port 3(vnet1) entered forwarding state
br0: port 3(vnet1) entered forwarding state
kvm: zapping shadow pages for mmio generation wraparound
br0: port 1(p17p1) entered forwarding state
kvm [1915]: vcpu0 unhandled rdmsr: 0xc0010001
kvm [1949]: vcpu0 unhandled rdmsr: 0xc0010001
audit: type=1400 audit(1426089170.976:30): apparmor="DENIED" operation="open" profile="/usr/sbin/ntpd" name="/etc/leap.seconds" pid=2145 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
br0: port 2(vnet0) entered forwarding state
br0: port 3(vnet1) entered forwarding state
EXT4-fs (sdc1): recovery complete
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
br0: Multicast hash table chain limit reached: p17p1
br0: Multicast hash table chain limit reached: p17p1
br0: Cannot rehash multicast hash table, disabling snooping: p17p1, 251, -22
ata2.00: exception Emask 0x0 SAct 0x7000 SErr 0x0 action 0x0
ata2.00: irq_stat 0x40000008
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/00:60:60:a0:0e/01:00:3c:00:00/40 tag 12 ncq 131072 in
res 41/40:00:7a:a0:0e/00:00:3c:00:00/40 Emask 0x409 (media error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { UNC }
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] Unhandled sense code
sd 1:0:0:0: [sdb]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb]
Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
3c 0e a0 7a
sd 1:0:0:0: [sdb]
Add. Sense: Unrecovered read error - auto reallocate failed
sd 1:0:0:0: [sdb] CDB:
Read(10): 28 00 3c 0e a0 60 00 01 00 00
end_request: I/O error, dev sdb, sector 1007591546
Buffer I/O error on device sdb, logical block 125948943
Buffer I/O error on device sdb, logical block 125948944
Buffer I/O error on device sdb, logical block 125948945
Buffer I/O error on device sdb, logical block 125948946
Buffer I/O error on device sdb, logical block 125948947
Buffer I/O error on device sdb, logical block 125948948
Buffer I/O error on device sdb, logical block 125948949
Buffer I/O error on device sdb, logical block 125948950
Buffer I/O error on device sdb, logical block 125948951
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x1800000 SErr 0x0 action 0x0
ata2.00: irq_stat 0x40000008
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/08:b8:78:a0:0e/00:00:3c:00:00/40 tag 23 ncq 4096 in
res 41/40:00:7a:a0:0e/00:00:3c:00:00/40 Emask 0x409 (media error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { UNC }
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] Unhandled sense code
sd 1:0:0:0: [sdb]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb]
Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
3c 0e a0 7a
sd 1:0:0:0: [sdb]
Add. Sense: Unrecovered read error - auto reallocate failed
sd 1:0:0:0: [sdb] CDB:
Read(10): 28 00 3c 0e a0 78 00 00 08 00
end_request: I/O error, dev sdb, sector 1007591546
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x4000000 SErr 0x0 action 0x0
ata2.00: irq_stat 0x40000008
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/08:d0:78:a0:0e/00:00:3c:00:00/40 tag 26 ncq 4096 in
res 41/40:00:7a:a0:0e/00:00:3c:00:00/40 Emask 0x409 (media error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { UNC }
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] Unhandled sense code
sd 1:0:0:0: [sdb]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb]
Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
3c 0e a0 7a
sd 1:0:0:0: [sdb]
Add. Sense: Unrecovered read error - auto reallocate failed
sd 1:0:0:0: [sdb] CDB:
Read(10): 28 00 3c 0e a0 78 00 00 08 00
end_request: I/O error, dev sdb, sector 1007591546
quiet_error: 21 callbacks suppressed
Buffer I/O error on device sdb, logical block 125948943
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x20000000 SErr 0x0 action 0x0
ata2.00: irq_stat 0x40000008
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/08:e8:78:a0:0e/00:00:3c:00:00/40 tag 29 ncq 4096 in
res 41/40:00:7a:a0:0e/00:00:3c:00:00/40 Emask 0x409 (media error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { UNC }
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] Unhandled sense code
sd 1:0:0:0: [sdb]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb]
Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
3c 0e a0 7a
sd 1:0:0:0: [sdb]
Add. Sense: Unrecovered read error - auto reallocate failed
sd 1:0:0:0: [sdb] CDB:
Read(10): 28 00 3c 0e a0 78 00 00 08 00
end_request: I/O error, dev sdb, sector 1007591546
Buffer I/O error on device sdb, logical block 125948943
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x40000000 SErr 0x0 action 0x0
ata2.00: irq_stat 0x40000008
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/08:f0:78:a0:0e/00:00:3c:00:00/40 tag 30 ncq 4096 in
res 41/40:00:7a:a0:0e/00:00:3c:00:00/40 Emask 0x409 (media error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { UNC }
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] Unhandled sense code
sd 1:0:0:0: [sdb]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb]
Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
3c 0e a0 7a
sd 1:0:0:0: [sdb]
Add. Sense: Unrecovered read error - auto reallocate failed
sd 1:0:0:0: [sdb] CDB:
Read(10): 28 00 3c 0e a0 78 00 00 08 00
end_request: I/O error, dev sdb, sector 1007591546
Buffer I/O error on device sdb, logical block 125948943
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata2.00: irq_stat 0x40000008
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/08:00:78:a0:0e/00:00:3c:00:00/40 tag 0 ncq 4096 in
res 41/40:00:7a:a0:0e/00:00:3c:00:00/40 Emask 0x409 (media error)
ata2.00: status: { DRDY ERR }
ata2.00: error: { UNC }
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] Unhandled sense code
sd 1:0:0:0: [sdb]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 1:0:0:0: [sdb]
Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
3c 0e a0 7a
sd 1:0:0:0: [sdb]
Add. Sense: Unrecovered read error - auto reallocate failed
sd 1:0:0:0: [sdb] CDB:
Read(10): 28 00 3c 0e a0 78 00 00 08 00
end_request: I/O error, dev sdb, sector 1007591546
Buffer I/O error on device sdb, logical block 125948943
ata2: EH complete
perf interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Key type ceph registered
libceph: loaded (mon/osd proto 15/24)
rbd: loaded (major 251)
libceph: client4999 fsid 66b04cae-2f84-4a40-8259-43a76db3c60d
libceph: mon1 10.0.0.6:6789 session established
rbd0: unknown partition table
rbd: rbd0: added with size 0x9c4000000
EXT4-fs (rbd0): recovery complete
EXT4-fs (rbd0): mounted filesystem with ordered data mode. Opts: (null)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket error on write
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket error on write
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket error on write
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket error on write
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket error on write
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket error on write
libceph: osd0 10.0.1.4:6800 socket error on write
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket error on write
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket error on write
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket error on write
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket error on write
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket error on write
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket error on write
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket error on write
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd1 10.0.1.3:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
Adding 58614676k swap on /dev/sdc1. Priority:-1 extents:1 across:58614676k SSFS
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 10.0.1.4:6800 socket closed (con state OPEN)
libceph: osd0 down
libceph: osd2 10.0.1.2:6800 socket closed (con state OPEN)
libceph: osd0 up
libceph: osd0 down
libceph: osd0 up