Xorg.0.log - test1
X.Org X Server 1.15.0
Release Date: 2013-12-27
X Protocol Version 11, Revision 0
Build Operating System: 2.6.32-220.17.1.el6.x86_64
Current Operating System: Linux moclx94 3.10.0-123.20.1.el7.x86_64 #1 SMP Thu Jan 29 18:05:33 UTC 2015 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-123.20.1.el7.x86_64 root=/dev/mapper/centos-root ro rd.lvm.lv=centos/swap vconsole.font=latarcyrheb-sun16 rd.lvm.lv=centos/root vconsole.keymap=us rhgb quiet LANG=en_US.UTF-8
Build Date: 11 December 2014 07:21:26PM
Build ID: xorg-x11-server 1.15.0-7.el7_0.3
Current version of pixman: 0.32.4
Before reporting problems, check
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 25 09:12:23 2015
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "1"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(**) Xinerama: enabled
(**) FontPath set to:
/usr/share/fonts/default/Type1,
catalogue:/etc/X11/fontpath.d,
built-ins
(==) ModulePath set to "/usr/lib64/xorg/modules"
(WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x812020
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 15.0
X.Org XInput driver : 20.0
X.Org Server Extension : 8.0
(II) xfree86: Adding drm device (/dev/dri/card0)
(--) PCI:*(0:4:0:0) 10de:103a:103c:1036 rev 161, Mem @ 0xf2000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension Present
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension SELinux
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(WW) "xwayland" is not to be loaded by default. Skipping.
(II) LoadModule: "extmod"
(II) Module "extmod" already built-in
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 340.65 Tue Dec 2 09:10:06 PST 2014
Loading extension GLX
(II) LoadModule: "dbe"
(II) Module "dbe" already built-in
(II) LoadModule: "record"
(II) Module "record" already built-in
(II) LoadModule: "nvidia"
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 340.65 Tue Dec 2 08:47:36 PST 2014
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(++) using VT number 1
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(WW) Unresolved symbol: fbGetGCPrivateKey
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib64/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(WW) NVIDIA: The Composite and Xinerama extensions are both enabled, which
(WW) NVIDIA: is an unsupported configuration. The driver will continue
(WW) NVIDIA: to load, but may behave strangely.
(WW) NVIDIA: Xinerama is enabled, so RandR has likely been disabled by the
(WW) NVIDIA: X server.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "Stereo" "0"
(**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
(**) NVIDIA(0): Option "SLI" "Mosaic"
(**) NVIDIA(0): Option "MultiGPU" "Off"
(**) NVIDIA(0): Option "BaseMosaic" "off"
(**) NVIDIA(0): Stereo disabled by request
(**) NVIDIA(0): NVIDIA SLI Mosaic mode selected.
(**) NVIDIA(0): NVIDIA Multi-GPU disabled.
(**) NVIDIA(0): Option "MetaModes" "2560x1600 +0+0, 2560x1600 +2560+0, 2560x1600 +5120+0"
(**) NVIDIA(0): Enabling 2D acceleration
(WW) NVIDIA(0): Failed to initialize SLI! Reason: Only one GPU detected.
(WW) NVIDIA(0): Only one GPU will be used for this X screen.
(II) NVIDIA(0): Display (DELL U3014 (DFP-0)) does not support NVIDIA 3D Vision
(II) NVIDIA(0): stereo.
(II) NVIDIA(0): Display (DELL U3014 (DFP-3)) does not support NVIDIA 3D Vision
(II) NVIDIA(0): stereo.
(II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
(II) NVIDIA(0): NVIDIA GPU Quadro K6000 (GK110BGL) at PCI:4:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 12582912 kBytes
(--) NVIDIA(0): VideoBIOS: 80.80.3e.00.07
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(II) NVIDIA(GPU-0): Display (DELL U3014 (DFP-5)) does not support NVIDIA 3D Vision
(II) NVIDIA(GPU-0): stereo.
(--) NVIDIA(0): Valid display device(s) on Quadro K6000 at PCI:4:0:0
(--) NVIDIA(0): CRT-0
(--) NVIDIA(0): DELL U3014 (DFP-0) (boot, connected)
(--) NVIDIA(0): DFP-1
(--) NVIDIA(0): DFP-2
(--) NVIDIA(0): DELL U3014 (DFP-3) (connected)
(--) NVIDIA(0): DFP-4
(--) NVIDIA(0): DELL U3014 (DFP-5) (connected)
(--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
(--) NVIDIA(0): DELL U3014 (DFP-0): Internal TMDS
(--) NVIDIA(GPU-0): DELL U3014 (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): DFP-1: Internal TMDS
(--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
(--) NVIDIA(0): DFP-2: Internal TMDS
(--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
(--) NVIDIA(0): DELL U3014 (DFP-3): Internal TMDS
(--) NVIDIA(GPU-0): DELL U3014 (DFP-3): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): DFP-4: Internal DisplayPort
(--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
(--) NVIDIA(0): DELL U3014 (DFP-5): Internal DisplayPort
(--) NVIDIA(GPU-0): DELL U3014 (DFP-5): 960.0 MHz maximum pixel clock
(**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) NVIDIA(0): device DELL U3014 (DFP-0) (Using EDID frequencies has been
(**) NVIDIA(0): enabled on all display devices.)
(**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) NVIDIA(0): device DELL U3014 (DFP-3) (Using EDID frequencies has been
(**) NVIDIA(0): enabled on all display devices.)
(**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) NVIDIA(0): device DELL U3014 (DFP-5) (Using EDID frequencies has been
(**) NVIDIA(0): enabled on all display devices.)
(WW) NVIDIA(GPU-0): The EDID for DELL U3014 (DFP-5) contradicts itself: mode
(WW) NVIDIA(GPU-0): "720x480" is specified in the EDID; however, the EDID's
(WW) NVIDIA(GPU-0): valid HorizSync range (29.000-113.000 kHz) would exclude
(WW) NVIDIA(GPU-0): this mode's HorizSync (15.7 kHz); ignoring HorizSync check
(WW) NVIDIA(GPU-0): for mode "720x480".
(WW) NVIDIA(GPU-0): The EDID for DELL U3014 (DFP-5) contradicts itself: mode
(WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's
(WW) NVIDIA(GPU-0): valid HorizSync range (29.000-113.000 kHz) would exclude
(WW) NVIDIA(GPU-0): this mode's HorizSync (15.6 kHz); ignoring HorizSync check
(WW) NVIDIA(GPU-0): for mode "720x576".
(WW) NVIDIA(GPU-0): The EDID for DELL U3014 (DFP-5) contradicts itself: mode
(WW) NVIDIA(GPU-0): "720x480" is specified in the EDID; however, the EDID's
(WW) NVIDIA(GPU-0): valid HorizSync range (29.000-113.000 kHz) would exclude
(WW) NVIDIA(GPU-0): this mode's HorizSync (15.7 kHz); ignoring HorizSync check
(WW) NVIDIA(GPU-0): for mode "720x480".
(WW) NVIDIA(GPU-0): The EDID for DELL U3014 (DFP-5) contradicts itself: mode
(WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; however, the EDID's
(WW) NVIDIA(GPU-0): valid HorizSync range (29.000-113.000 kHz) would exclude
(WW) NVIDIA(GPU-0): this mode's HorizSync (15.6 kHz); ignoring HorizSync check
(WW) NVIDIA(GPU-0): for mode "720x576".
(WW) NVIDIA(GPU-0): The EDID for DELL U3014 (DFP-5) contradicts itself: mode
(WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(GPU-0): valid HorizSync range (29.000-113.000 kHz) would exclude
(WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
(WW) NVIDIA(GPU-0): for mode "1920x1080".
(WW) NVIDIA(GPU-0): The EDID for DELL U3014 (DFP-5) contradicts itself: mode
(WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(GPU-0): valid HorizSync range (29.000-113.000 kHz) would exclude
(WW) NVIDIA(GPU-0): this mode's HorizSync (27.0 kHz); ignoring HorizSync check
(WW) NVIDIA(GPU-0): for mode "1920x1080".
(WW) NVIDIA(GPU-0): The EDID for DELL U3014 (DFP-5) contradicts itself: mode
(WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(GPU-0): valid VertRefresh range (49.000-86.000 Hz) would exclude
(WW) NVIDIA(GPU-0): this mode's VertRefresh (24.0 Hz); ignoring VertRefresh
(WW) NVIDIA(GPU-0): check for mode "1920x1080".
(II) NVIDIA(0): Validated MetaModes:
(II) NVIDIA(0): "2560x1600+0+0,2560x1600+2560+0,2560x1600+5120+0"
(II) NVIDIA(0): Virtual screen size determined to be 7680 x 1600
(--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
(II) NVIDIA: access.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "2560x1600+0+0,2560x1600+2560+0,2560x1600+5120+0"
Loading extension NV-GLX
(==) NVIDIA(0): Disabling shared memory pixmaps
(==) NVIDIA(0): Backing store enabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
Loading extension NV-CONTROL
(II) Loading sub module "dri2"
(II) LoadModule: "dri2"
(II) Module "dri2" already built-in
(II) NVIDIA(0): [DRI2] Setup complete
(II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
(WW) NVIDIA(0): Not registering RandR
(==) RandR enabled
(II) SELinux: Disabled on system
(II) Initializing extension GLX
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: Applying InputClass "system-keyboard"
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 2.8.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 20.0
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event1"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Power Button (/dev/input/event0)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: Applying InputClass "system-keyboard"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event0"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding drm device (/dev/dri/card0)
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event10)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event11)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event12)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HP HP Wireless KB and MS (/dev/input/event2)
(**) HP HP Wireless KB and MS: Applying InputClass "evdev keyboard catchall"
(**) HP HP Wireless KB and MS: Applying InputClass "system-keyboard"
(II) Using input driver 'evdev' for 'HP HP Wireless KB and MS'
(**) HP HP Wireless KB and MS: always reports core events
(**) evdev: HP HP Wireless KB and MS: Device: "/dev/input/event2"
(--) evdev: HP HP Wireless KB and MS: Vendor 0x3f0 Product 0x4a
(--) evdev: HP HP Wireless KB and MS: Found keys
(II) evdev: HP HP Wireless KB and MS: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.0/input/input2/event2"
(II) XINPUT: Adding extended input device "HP HP Wireless KB and MS" (type: KEYBOARD, id 8)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device HP HP Wireless KB and MS (/dev/input/event3)
(**) HP HP Wireless KB and MS: Applying InputClass "evdev pointer catchall"
(**) HP HP Wireless KB and MS: Applying InputClass "evdev keyboard catchall"
(**) HP HP Wireless KB and MS: Applying InputClass "system-keyboard"
(II) Using input driver 'evdev' for 'HP HP Wireless KB and MS'
(**) HP HP Wireless KB and MS: always reports core events
(**) evdev: HP HP Wireless KB and MS: Device: "/dev/input/event3"
(--) evdev: HP HP Wireless KB and MS: Vendor 0x3f0 Product 0x4a
(--) evdev: HP HP Wireless KB and MS: Found 3 mouse buttons
(--) evdev: HP HP Wireless KB and MS: Found scroll wheel(s)
(--) evdev: HP HP Wireless KB and MS: Found relative axes
(--) evdev: HP HP Wireless KB and MS: Found x and y relative axes
(--) evdev: HP HP Wireless KB and MS: Found absolute axes
(II) evdev: HP HP Wireless KB and MS: Forcing absolute x/y axes to exist.
(--) evdev: HP HP Wireless KB and MS: Found keys
(II) evdev: HP HP Wireless KB and MS: Configuring as mouse
(II) evdev: HP HP Wireless KB and MS: Configuring as keyboard
(II) evdev: HP HP Wireless KB and MS: Adding scrollwheel support
(**) evdev: HP HP Wireless KB and MS: YAxisMapping: buttons 4 and 5
(**) evdev: HP HP Wireless KB and MS: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.1/input/input3/event3"
(II) XINPUT: Adding extended input device "HP HP Wireless KB and MS" (type: KEYBOARD, id 9)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) evdev: HP HP Wireless KB and MS: initialized for relative axes.
(WW) evdev: HP HP Wireless KB and MS: ignoring absolute axes.
(**) HP HP Wireless KB and MS: (accel) keeping acceleration scheme 1
(**) HP HP Wireless KB and MS: (accel) acceleration profile 0
(**) HP HP Wireless KB and MS: (accel) acceleration factor: 2.000
(**) HP HP Wireless KB and MS: (accel) acceleration threshold: 4
(II) config/udev: Adding input device HP HP Wireless KB and MS (/dev/input/mouse0)
(**) HP HP Wireless KB and MS: Applying InputClass "system-keyboard"
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event5)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event6)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event7)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event8)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device PC Speaker (/dev/input/event4)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event14)
(**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
(**) HP WMI hotkeys: Applying InputClass "system-keyboard"
(II) Using input driver 'evdev' for 'HP WMI hotkeys'
(**) HP WMI hotkeys: always reports core events
(**) evdev: HP WMI hotkeys: Device: "/dev/input/event14"
(--) evdev: HP WMI hotkeys: Vendor 0 Product 0
(--) evdev: HP WMI hotkeys: Found keys
(II) evdev: HP WMI hotkeys: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event14"
(II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 10)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"