dmesg - ryujin
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.18.6-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015
tseg: 0000000000
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c7e6ffff] usable
BIOS-e820: [mem 0x00000000c7e70000-0x00000000c7e87fff] ACPI data
BIOS-e820: [mem 0x00000000c7e88000-0x00000000c7ecffff] ACPI NVS
BIOS-e820: [mem 0x00000000c7ed0000-0x00000000c7efffff] reserved
BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000237ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/M4A88T-M, BIOS 2403 12/23/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF8000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000238000000 aka 9088M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xc7e70 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01b36000, 0x01b36fff] PGTABLE
BRK [0x01b37000, 0x01b37fff] PGTABLE
BRK [0x01b38000, 0x01b38fff] PGTABLE
init_memory_mapping: [mem 0x237e00000-0x237ffffff]
[mem 0x237e00000-0x237ffffff] page 2M
BRK [0x01b39000, 0x01b39fff] PGTABLE
init_memory_mapping: [mem 0x234000000-0x237dfffff]
[mem 0x234000000-0x237dfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x233ffffff]
[mem 0x200000000-0x233ffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xc7e6ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xc7dfffff] page 2M
[mem 0xc7e00000-0xc7e6ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x7fccf000-0x7fffffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FB340 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000C7E70100 00005C (v01 122310 XSDT1951 20101223 MSFT 00000097)
ACPI: FACP 0x00000000C7E70290 0000F4 (v03 122310 FACP1951 20101223 MSFT 00000097)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140926/tbfadt-649)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20140926/tbfadt-618)
ACPI: DSDT 0x00000000C7E70450 00EE09 (v01 A1580 A1580001 00000001 INTL 20060113)
ACPI: FACS 0x00000000C7E88000 000040
ACPI: APIC 0x00000000C7E70390 00007C (v01 122310 APIC1951 20101223 MSFT 00000097)
ACPI: MCFG 0x00000000C7E70410 00003C (v01 122310 OEMMCFG 20101223 MSFT 00000097)
ACPI: OEMB 0x00000000C7E88040 000072 (v01 122310 OEMB1951 20101223 MSFT 00000097)
ACPI: SRAT 0x00000000C7E7F8A0 0000E8 (v01 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET 0x00000000C7E7F990 000038 (v01 122310 OEMHPET 20101223 MSFT 00000097)
ACPI: SSDT 0x00000000C7E7F9D0 00088C (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x00100000-0xc7ffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x237ffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xc7ffffff] -> [mem 0x00000000-0xc7ffffff]
NUMA: Node 0 [mem 0x00000000-0xc7ffffff] + [mem 0x100000000-0x237ffffff] -> [mem 0x00000000-0x237ffffff]
NODE_DATA(0) allocated [mem 0x237ffa000-0x237ffdfff]
[ffffea0000000000-ffffea0008dfffff] PMD -> [ffff88022f600000-ffff8802375fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x237ffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xc7e6ffff]
node 0: [mem 0x100000000-0x237ffffff]
Initmem setup node 0 [mem 0x00001000-0x237ffffff]
On node 0 totalpages: 2096654
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 12730 pages used for memmap
DMA32 zone: 814704 pages, LIFO batch:31
Normal zone: 19968 pages used for memmap
Normal zone: 1277952 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 6 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff]
PM: Registered nosave memory: [mem 0x000e2000-0x000fffff]
PM: Registered nosave memory: [mem 0xc7e70000-0xc7e87fff]
PM: Registered nosave memory: [mem 0xc7e88000-0xc7ecffff]
PM: Registered nosave memory: [mem 0xc7ed0000-0xc7efffff]
PM: Registered nosave memory: [mem 0xc7f00000-0xff9fffff]
PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
e820: [mem 0xc7f00000-0xff9fffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880237c00000 s82880 r8192 d31808 u262144
pcpu-alloc: s82880 r8192 d31808 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2063871
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0xbc000000-0xbdffffff] (32MB)
Aperture pointing to e820 RAM. Ignoring.
AGP: Your BIOS doesn't leave a aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xbc000000-0xbfffffff] (65536KB)
PM: Registered nosave memory: [mem 0xbc000000-0xbfffffff]
Memory: 8108108K/8386616K available (5481K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 278508K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
Dump stacks of tasks blocking RCU-preempt GP.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=6.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
NR_IRQS:8448 nr_irqs:472 0
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3013.187 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6028.47 BogoMIPS (lpj=10043956)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140926
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
ftrace: allocating 20931 entries in 82 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) II X4 640 Processor (fam: 10, model: 05, stepping: 03)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
process: System has AMD C1E enabled
process: Switch to broadcast mode on CPU0
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
process: Switch to broadcast mode on CPU1
#2
process: Switch to broadcast mode on CPU2
#3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (24115.89 BogoMIPS)
process: Switch to broadcast mode on CPU3
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xc7e88000-0xc7ecffff] (294912 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 1:13:44, date: 03/07/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [1000, ffffff]
TOM: 00000000c8000000 aka 3200M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c8000000, dfffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffdfffff]
TOM2: 0000000238000000 aka 9088M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xc8000000-0xdfffffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x238000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc7f00000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
pci 0000:00:11.0: reg 0x24: [mem 0xfcfffc00-0xfcffffff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfcffe000-0xfcffefff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 0x10: [mem 0xfcffd000-0xfcffdfff]
pci 0000:00:12.1: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfcfff800-0xfcfff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfcffc000-0xfcffcfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xfcffb000-0xfcffbfff]
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfcfff400-0xfcfff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfcff4000-0xfcff7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfcffa000-0xfcffafff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [10de:0ca3] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xdc00-0xdc7f]
pci 0000:01:00.0: reg 0x30: [mem 0xfeb00000-0xfeb7ffff pref]
pci 0000:01:00.1: [10de:0be4] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfebf8000-0xfebfbfff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfebfffff]
pci 0000:00:02.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfbfff000-0xfbffffff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xfbff8000-0xfbffbfff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: PCI bridge to [bus 02]
pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0a.0: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc7f00000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 1F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xc7e70000-0xc7ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x040b] has been reserved
system 00:05: [io 0x04d6] has been reserved
system 00:05: [io 0x0c00-0x0c01] has been reserved
system 00:05: [io 0x0c14] has been reserved
system 00:05: [io 0x0c50-0x0c51] has been reserved
system 00:05: [io 0x0c52] has been reserved
system 00:05: [io 0x0c6c] has been reserved
system 00:05: [io 0x0c6f] has been reserved
system 00:05: [io 0x0cd0-0x0cd1] has been reserved
system 00:05: [io 0x0cd2-0x0cd3] has been reserved
system 00:05: [io 0x0cd4-0x0cd5] has been reserved
system 00:05: [io 0x0cd6-0x0cd7] has been reserved
system 00:05: [io 0x0cd8-0x0cdf] has been reserved
system 00:05: [io 0x0b00-0x0b3f] has been reserved
system 00:05: [io 0x0800-0x089f] could not be reserved
system 00:05: [io 0x0b00-0x0b0f] has been reserved
system 00:05: [io 0x0b20-0x0b3f] has been reserved
system 00:05: [io 0x0900-0x090f] has been reserved
system 00:05: [io 0x0910-0x091f] has been reserved
system 00:05: [io 0xfe00-0xfefe] has been reserved
system 00:05: [mem 0xc7f00000-0xc7ffffff] has been reserved
system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:05: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:05: [mem 0x6ff00000-0x6fffffff] could not be reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x0230-0x023f] has been reserved
system 00:06: [io 0x0290-0x029f] has been reserved
system 00:06: [io 0x0300-0x030f] has been reserved
system 00:06: [io 0x0a30-0x0a3f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:08: [mem 0x00100000-0xc7efffff] could not be reserved
system 00:08: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfebfffff]
pci 0000:00:02.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:00:0a.0: PCI bridge to [bus 02]
pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0a.0: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc7f00000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfebfffff]
pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 2 [mem 0xfbf00000-0xfbffffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xc7f00000-0xdfffffff]
pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 3268K (ffff88007fccf000 - ffff880080000000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ bc000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
microcode: CPU0: patch_level=0x010000b6
microcode: CPU1: patch_level=0x010000b6
microcode: CPU2: patch_level=0x010000b6
microcode: CPU3: patch_level=0x010000b6
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15971
Key type big_key registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
pcieport 0000:00:0a.0: irq 25 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
registered taskstats version 1
Magic number: 7:775:204
rtc_cmos 00:01: setting system clock to 2015-03-07 01:13:46 UTC (1425690826)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
random: systemd-tmpfile urandom read with 3 bits of entropy available
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
libata version 3.00 loaded.
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci-pci 0000:00:12.2: irq 17, io mem 0xfcfff800
ohci-pci: OHCI PCI platform driver
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xfcfff400
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 16, io mem 0xfcffe000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci-pci 0000:00:12.1: OHCI PCI host controller
ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.1: irq 16, io mem 0xfcffd000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfcffc000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: irq 18, io mem 0xfcffb000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 18, io mem 0xfcffa000
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd00 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd80 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe80 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcffff00 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcffff80 irq 22
scsi host6: pata_atiixp
scsi host7: pata_atiixp
ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
usb 2-2: new high-speed USB device number 2 using ehci-pci
usb 3-1: new low-speed USB device number 2 using ohci-pci
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: TSSTcorp CDDVDW SH-222AB, SB01, max UDMA/100
ata2.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/100
ata2.00: configured for UDMA/133
ata4.00: ATA-7: SAMSUNG HD502IJ, 1AA01110, max UDMA7
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 3-2: new low-speed USB device number 3 using ohci-pci
ata4.00: configured for UDMA/133
ata1.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1110 PQ: 0 ANSI: 5
scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-222AB SB01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 3:0:0:0: [sdc] Attached SCSI disk
sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3013.530 MHz
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Wired Keyboard 400 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:045E:0752.0001/input/input2
hid-generic 0003:045E:0752.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 400] on usb-0000:00:12.0-1/input0
input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:045E:00CB.0002/input/input3
hid-generic 0003:045E:00CB.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:12.0-2/input0
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
Switched to clocksource tsc
systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture 'x86-64'.
systemd[1]: Set hostname to .
systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory.
systemd[1]: Cannot add dependency job for unit cups.path, ignoring: Unit cups.path failed to load: No such file or directory.
systemd[1]: Cannot add dependency job for unit ntpdate.service, ignoring: Unit ntpdate.service failed to load: No such file or directory.
systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Root Slice.
systemd[1]: Created slice Root Slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Device-mapper event daemon FIFOs.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting Temporary Directory...
systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting User and Session Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Remote File Systems.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting Swap.
systemd[1]: Reached target Swap.
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Service...
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting LVM2 metadata daemon socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting Slices.
systemd[1]: Reached target Slices.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Paths.
systemd[1]: Reached target Paths.
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Started Rebuild Hardware Database.
systemd[1]: Started First Boot Wizard.
systemd[1]: Started Create System Users.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Started Rebuild Dynamic Linker Cache.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Temporary Directory.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Starting Create Static Device Nodes in /dev...
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting Configuration File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Configuration File System.
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Journal Service.
systemd-journald[154]: Received request to flush runtime journal from PID 1
microcode: CPU0: new patch_level=0x010000c8
microcode: CPU1: new patch_level=0x010000c8
microcode: CPU2: new patch_level=0x010000c8
microcode: CPU3: new patch_level=0x010000c8
ACPI: processor limited to max C-state 1
acpi-cpufreq: overriding BIOS provided _PSD data
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
parport_pc 00:02: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SOR1) (20140926/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b2f (\SMRG) (20140926/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b2f (\_SB_.PCI0.SBRG.ASOC.SMRG) (20140926/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
wmi: Mapper loaded
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x3c
sp5100_tco: failed to find MMIO address, giving up.
MCE: In-kernel MCE decoding enabled.
input: PC Speaker as /devices/platform/pcspkr/input/input7
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0: irq 26 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168e/8111e at 0xffffc9000001a000, f4:6d:04:76:86:f5, XID 0c200000 IRQ 26
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
[drm] Initialized drm 1.1.0 20060810
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
raid6: sse2x1 2542 MB/s
raid6: sse2x2 4414 MB/s
raid6: sse2x4 4875 MB/s
raid6: using algorithm sse2x4 (4875 MB/s)
raid6: using intx1 recovery algorithm
ppdev: user-space parallel port driver
xor: measuring software checksum speed
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
prefetch64-sse: 3172.800 MB/sec
generic_sse: 3056.400 MB/sec
xor: using function: prefetch64-sse (3172.800 MB/sec)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
sound hdaudioC0D0: autoconfig: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x20/0x21
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Rear Mic=0x1a
sound hdaudioC0D0: Front Mic=0x1e
sound hdaudioC0D0: Line=0x1b
Btrfs loaded
BTRFS: device fsid 6b08ebbd-9b9e-4fd1-82ce-edb76b062f3f devid 1 transid 1367 /dev/sdc1
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.76 Thu Jan 22 12:11:08 PST 2015
BTRFS: device fsid 3a9efaa6-d2eb-4849-86b8-69bf0b430b96 devid 1 transid 14874 /dev/sda1
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19
mousedev: PS/2 mouse device common for all mice
cfg80211: Calling CRDA to update world regulatory domain
rtl8192cu: Chip version 0x10
rtl8192cu: MAC address: 80:1f:02:ee:81:4f
rtl8192cu: Board Type 0
rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
usbcore: registered new interface driver rtl8192cu
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: authenticated
wlan0: associate with 00:1a:3f:86:73:eb (try 1/3)
wlan0: RX AssocResp from 00:1a:3f:86:73:eb (capab=0x411 status=0 aid=2)
wlan0: associated
usb 3-2: USB disconnect, device number 3
usb 3-2: new low-speed USB device number 4 using ohci-pci
input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:045E:00CB.0003/input/input20
hid-generic 0003:045E:00CB.0003: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:12.0-2/input0
usb 3-2: USB disconnect, device number 4
nvidia 0000:01:00.0: irq 27 for MSI/MSI-X
usb 3-2: new low-speed USB device number 5 using ohci-pci
input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:045E:00CB.0004/input/input21
hid-generic 0003:045E:00CB.0004: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:12.0-2/input0
fuse init (API version 7.23)
wlan0: deauthenticating from 00:1a:3f:86:73:eb by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: authenticated
wlan0: associate with 00:1a:3f:86:73:eb (try 1/3)
wlan0: RX AssocResp from 00:1a:3f:86:73:eb (capab=0x411 status=0 aid=2)
wlan0: associated
wlan0: deauthenticating from 00:1a:3f:86:73:eb by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: authenticated
wlan0: associate with 00:1a:3f:86:73:eb (try 1/3)
wlan0: RX AssocResp from 00:1a:3f:86:73:eb (capab=0x411 status=0 aid=2)
wlan0: associated
wlan0: deauthenticating from 00:1a:3f:86:73:eb by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: send auth to 00:1a:3f:86:73:eb (try 2/3)
wlan0: authenticated
wlan0: associate with 00:1a:3f:86:73:eb (try 1/3)
wlan0: RX AssocResp from 00:1a:3f:86:73:eb (capab=0x411 status=0 aid=2)
wlan0: associated
wlan0: deauthenticating from 00:1a:3f:86:73:eb by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: authenticated
wlan0: associate with 00:1a:3f:86:73:eb (try 1/3)
wlan0: RX AssocResp from 00:1a:3f:86:73:eb (capab=0x411 status=0 aid=2)
wlan0: associated
wlan0: deauthenticating from 00:1a:3f:86:73:eb by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: authenticated
wlan0: associate with 00:1a:3f:86:73:eb (try 1/3)
wlan0: RX AssocResp from 00:1a:3f:86:73:eb (capab=0x411 status=0 aid=2)
wlan0: associated
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
wlan0: deauthenticating from 00:1a:3f:86:73:eb by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
sd 3:0:0:0: [sdc] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 3:0:0:0: [sdc] Stopping disk
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
serial 00:03: disabled
serial 00:03: System wakeup disabled by ACPI
parport_pc 00:02: disabled
sd 1:0:0:0: [sdb] Stopping disk
PM: suspend of devices complete after 1253.102 msecs
PM: late suspend of devices complete after 0.907 msecs
r8169 0000:02:00.0: System wakeup enabled by ACPI
ohci-pci 0000:00:14.5: System wakeup enabled by ACPI
ohci-pci 0000:00:13.1: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
ohci-pci 0000:00:12.1: System wakeup enabled by ACPI
ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 12.555 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
microcode: CPU0: new patch_level=0x010000c8
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
kvm: enabling virtualization on CPU1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000c8
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
kvm: enabling virtualization on CPU2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000c8
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
kvm: enabling virtualization on CPU3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000c8
CPU3 is up
ACPI: Waking up from system sleep state S3
ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
ohci-pci 0000:00:12.1: System wakeup disabled by ACPI
ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
ohci-pci 0000:00:13.1: System wakeup disabled by ACPI
ohci-pci 0000:00:14.5: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.615 msecs
PM: early resume of devices complete after 0.442 msecs
rtc_cmos 00:01: System wakeup disabled by ACPI
r8169 0000:02:00.0: System wakeup disabled by ACPI
parport_pc 00:02: activated
serial 00:03: activated
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
sd 3:0:0:0: [sdc] Starting disk
PM: resume of devices complete after 210.541 msecs
rtl8192cu: Chip version 0x10
rtl8192cu: MAC address: 80:1f:02:ee:81:4f
rtl8192cu: Board Type 0
rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
ieee80211 phy1: Selected rate control algorithm 'rtl_rc'
PM: Finishing wakeup.
Restarting tasks ... done.
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: configured for UDMA/100
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: send auth to 00:1a:3f:86:73:eb (try 2/3)
wlan0: send auth to 00:1a:3f:86:73:eb (try 3/3)
wlan0: authentication with 00:1a:3f:86:73:eb timed out
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: authenticated
wlan0: associate with 00:1a:3f:86:73:eb (try 1/3)
wlan0: associate with 00:1a:3f:86:73:eb (try 2/3)
wlan0: associate with 00:1a:3f:86:73:eb (try 3/3)
wlan0: association with 00:1a:3f:86:73:eb timed out
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: direct probe to 00:1a:3f:86:73:eb (try 1/3)
wlan0: direct probe to 00:1a:3f:86:73:eb (try 2/3)
wlan0: direct probe to 00:1a:3f:86:73:eb (try 3/3)
wlan0: authentication with 00:1a:3f:86:73:eb timed out
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: send auth to 00:1a:3f:86:73:eb (try 2/3)
wlan0: send auth to 00:1a:3f:86:73:eb (try 3/3)
wlan0: authentication with 00:1a:3f:86:73:eb timed out
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: authenticated
wlan0: associate with 00:1a:3f:86:73:eb (try 1/3)
wlan0: RX AssocResp from 00:1a:3f:86:73:eb (capab=0x411 status=0 aid=2)
wlan0: associated
usb 2-2: USB disconnect, device number 2
wlan0: deauthenticating from 00:1a:3f:86:73:eb by local choice (Reason: 3=DEAUTH_LEAVING)
rtl_usb: reg 0x102, usbctrl_vendorreq TimeOut! status:0xffffffed value=0xd3c000
rtl_usb: reg 0x422, usbctrl_vendorreq TimeOut! status:0xffffffed value=0xd30000
rtl_usb: reg 0x542, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x80390004
rtl_usb: reg 0xe08, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x1000100
cfg80211: Calling CRDA to update world regulatory domain
usb 2-2: new high-speed USB device number 3 using ehci-pci
rtl8192cu: Chip version 0x10
rtl8192cu: MAC address: 80:1f:02:ee:81:4f
rtl8192cu: Board Type 0
rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
ieee80211 phy2: Selected rate control algorithm 'rtl_rc'
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: authenticated
wlan0: associate with 00:1a:3f:86:73:eb (try 1/3)
wlan0: RX AssocResp from 00:1a:3f:86:73:eb (capab=0x411 status=0 aid=2)
wlan0: associated
wlan0: deauthenticating from 00:1a:3f:86:73:eb by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: authenticated
wlan0: associate with 00:1a:3f:86:73:eb (try 1/3)
wlan0: RX AssocResp from 00:1a:3f:86:73:eb (capab=0x411 status=0 aid=2)
wlan0: associated
wlan0: deauthenticating from 00:1a:3f:86:73:eb by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
usb 2-2: USB disconnect, device number 3
usb 2-2: new high-speed USB device number 4 using ehci-pci
rtl8192cu: Chip version 0x10
rtl8192cu: MAC address: 80:1f:02:ee:81:4f
rtl8192cu: Board Type 0
rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
ieee80211 phy3: Selected rate control algorithm 'rtl_rc'
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: authenticated
wlan0: associate with 00:1a:3f:86:73:eb (try 1/3)
wlan0: RX AssocResp from 00:1a:3f:86:73:eb (capab=0x411 status=0 aid=2)
wlan0: associated
wlan0: deauthenticating from 00:1a:3f:86:73:eb by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: authenticated
wlan0: associate with 00:1a:3f:86:73:eb (try 1/3)
wlan0: RX AssocResp from 00:1a:3f:86:73:eb (capab=0x411 status=0 aid=2)
wlan0: associated
wlan0: deauthenticating from 00:1a:3f:86:73:eb by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
usb 2-2: USB disconnect, device number 4
usbcore: deregistering interface driver rtl8192cu
usb 2-2: new high-speed USB device number 5 using ehci-pci
cfg80211: Calling CRDA to update world regulatory domain
rtl8192cu: Chip version 0x10
rtl8192cu: MAC address: 80:1f:02:ee:81:4f
rtl8192cu: Board Type 0
rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
usbcore: registered new interface driver rtl8192cu
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: authenticated
wlan0: associate with 00:1a:3f:86:73:eb (try 1/3)
wlan0: RX AssocResp from 00:1a:3f:86:73:eb (capab=0x411 status=0 aid=2)
wlan0: associated
wlan0: deauthenticating from 00:1a:3f:86:73:eb by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: send auth to 00:1a:3f:86:73:eb (try 2/3)
wlan0: send auth to 00:1a:3f:86:73:eb (try 3/3)
wlan0: authentication with 00:1a:3f:86:73:eb timed out
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: authenticated
wlan0: associate with 00:1a:3f:86:73:eb (try 1/3)
wlan0: associate with 00:1a:3f:86:73:eb (try 2/3)
wlan0: associate with 00:1a:3f:86:73:eb (try 3/3)
wlan0: association with 00:1a:3f:86:73:eb timed out
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: authenticated
wlan0: associate with 00:1a:3f:86:73:eb (try 1/3)
wlan0: associate with 00:1a:3f:86:73:eb (try 2/3)
wlan0: associate with 00:1a:3f:86:73:eb (try 3/3)
wlan0: association with 00:1a:3f:86:73:eb timed out
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: authenticated
wlan0: associate with 00:1a:3f:86:73:eb (try 1/3)
wlan0: RX AssocResp from 00:1a:3f:86:73:eb (capab=0x411 status=0 aid=2)
wlan0: associated
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
usb 2-1: new high-speed USB device number 6 using ehci-pci
usb-storage 2-1:1.0: USB Mass Storage device detected
usb-storage 2-1:1.0: Quirks match for vid 05e3 pid 0723: 8000
scsi host8: usb-storage 2-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 8:0:0:0: Direct-Access Generic STORAGE DEVICE 9451 PQ: 0 ANSI: 0
sd 8:0:0:0: [sdd] 7626752 512-byte logical blocks: (3.90 GB/3.63 GiB)
sd 8:0:0:0: [sdd] Write Protect is off
sd 8:0:0:0: [sdd] Mode Sense: 03 00 00 00
sd 8:0:0:0: [sdd] No Caching mode page found
sd 8:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1 sdd2
sd 8:0:0:0: [sdd] Attached SCSI removable disk
wlan0: deauthenticating from 00:1a:3f:86:73:eb by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: send auth to 00:1a:3f:86:73:eb (try 2/3)
wlan0: send auth to 00:1a:3f:86:73:eb (try 3/3)
wlan0: authentication with 00:1a:3f:86:73:eb timed out
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: send auth to 00:1a:3f:86:73:eb (try 2/3)
wlan0: send auth to 00:1a:3f:86:73:eb (try 3/3)
wlan0: authentication with 00:1a:3f:86:73:eb timed out
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: authenticated
wlan0: associate with 00:1a:3f:86:73:eb (try 1/3)
wlan0: RX AssocResp from 00:1a:3f:86:73:eb (capab=0x411 status=0 aid=2)
wlan0: associated
wlan0: deauthenticated from 00:1a:3f:86:73:eb (Reason: 2=PREV_AUTH_NOT_VALID)
cfg80211: Calling CRDA to update world regulatory domain
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: authenticated
wlan0: associate with 00:1a:3f:86:73:eb (try 1/3)
wlan0: RX AssocResp from 00:1a:3f:86:73:eb (capab=0x411 status=0 aid=2)
wlan0: associated
smpboot: Booting Node 0 Processor 2 APIC 0x2
LVT offset 1 assigned for vector 0x400
kvm: enabling virtualization on CPU2
process: Switch to broadcast mode on CPU2
smpboot: Booting Node 0 Processor 3 APIC 0x3
kvm: enabling virtualization on CPU3
process: Switch to broadcast mode on CPU3
usb 4-1: new full-speed USB device number 2 using ohci-pci
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver pl2303
pl2303 4-1:1.0: pl2303 converter detected
usb 4-1: pl2303 converter now attached to ttyUSB0
usb 4-1: USB disconnect, device number 2
pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
pl2303 4-1:1.0: device disconnected
usb 4-1: new full-speed USB device number 3 using ohci-pci
pl2303 4-1:1.0: pl2303 converter detected
usb 4-1: pl2303 converter now attached to ttyUSB0
sdd: unknown partition table
sd 8:0:0:0: [sdd]
Result: hostbyte=0x00 driverbyte=0x08
sd 8:0:0:0: [sdd]
Sense Key : 0x2 [current]
sd 8:0:0:0: [sdd]
ASC=0x3a ASCQ=0x0
sd 8:0:0:0: [sdd] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sdd, sector 0
Buffer I/O error on dev sdd, logical block 0, async page read
sd 8:0:0:0: [sdd]
Result: hostbyte=0x00 driverbyte=0x08
sd 8:0:0:0: [sdd]
Sense Key : 0x2 [current]
sd 8:0:0:0: [sdd]
ASC=0x3a ASCQ=0x0
sd 8:0:0:0: [sdd] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sdd, sector 0
Buffer I/O error on dev sdd, logical block 0, async page read
ldm_validate_partition_table(): Disk read failed.
sd 8:0:0:0: [sdd]
Result: hostbyte=0x00 driverbyte=0x08
sd 8:0:0:0: [sdd]
Sense Key : 0x2 [current]
sd 8:0:0:0: [sdd]
ASC=0x3a ASCQ=0x0
sd 8:0:0:0: [sdd] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sdd, sector 0
Buffer I/O error on dev sdd, logical block 0, async page read
sd 8:0:0:0: [sdd]
Result: hostbyte=0x00 driverbyte=0x08
sd 8:0:0:0: [sdd]
Sense Key : 0x2 [current]
sd 8:0:0:0: [sdd]
ASC=0x3a ASCQ=0x0
sd 8:0:0:0: [sdd] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sdd, sector 0
Buffer I/O error on dev sdd, logical block 0, async page read
sd 8:0:0:0: [sdd]
Result: hostbyte=0x00 driverbyte=0x08
sd 8:0:0:0: [sdd]
Sense Key : 0x2 [current]
sd 8:0:0:0: [sdd]
ASC=0x3a ASCQ=0x0
sd 8:0:0:0: [sdd] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sdd, sector 0
Buffer I/O error on dev sdd, logical block 0, async page read
sdd: unable to read partition table
usb 2-1: USB disconnect, device number 6
usb 2-1: new high-speed USB device number 7 using ehci-pci
usb-storage 2-1:1.0: USB Mass Storage device detected
usb-storage 2-1:1.0: Quirks match for vid 05e3 pid 0723: 8000
scsi host9: usb-storage 2-1:1.0
scsi 9:0:0:0: Direct-Access Generic STORAGE DEVICE 9451 PQ: 0 ANSI: 0
sd 9:0:0:0: [sdd] 124735488 512-byte logical blocks: (63.8 GB/59.4 GiB)
sd 9:0:0:0: [sdd] Write Protect is off
sd 9:0:0:0: [sdd] Mode Sense: 03 00 00 00
sd 9:0:0:0: [sdd] No Caching mode page found
sd 9:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
sd 9:0:0:0: [sdd] Attached SCSI removable disk
usb 2-1: USB disconnect, device number 7
usb 3-2: USB disconnect, device number 5
usb 3-2: new low-speed USB device number 6 using ohci-pci
input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:045E:00CB.0005/input/input25
hid-generic 0003:045E:00CB.0005: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:12.0-2/input0
usb 3-1: USB disconnect, device number 2
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
wlan0: deauthenticating from 00:1a:3f:86:73:eb by local choice (Reason: 3=DEAUTH_LEAVING)
sd 3:0:0:0: [sdc] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 3:0:0:0: [sdc] Stopping disk
cfg80211: Calling CRDA to update world regulatory domain
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
serial 00:03: disabled
serial 00:03: System wakeup disabled by ACPI
parport_pc 00:02: disabled
PM: suspend of devices complete after 1038.620 msecs
PM: late suspend of devices complete after 0.511 msecs
r8169 0000:02:00.0: System wakeup enabled by ACPI
ohci-pci 0000:00:14.5: System wakeup enabled by ACPI
ohci-pci 0000:00:13.1: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
ohci-pci 0000:00:12.1: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 12.902 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
microcode: CPU0: new patch_level=0x010000c8
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
kvm: enabling virtualization on CPU1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000c8
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
kvm: enabling virtualization on CPU2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000c8
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
kvm: enabling virtualization on CPU3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000c8
CPU3 is up
ACPI: Waking up from system sleep state S3
ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
ohci-pci 0000:00:12.1: System wakeup disabled by ACPI
ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
ohci-pci 0000:00:13.1: System wakeup disabled by ACPI
ohci-pci 0000:00:14.5: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.563 msecs
PM: early resume of devices complete after 0.444 msecs
rtc_cmos 00:01: System wakeup disabled by ACPI
r8169 0000:02:00.0: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
parport_pc 00:02: activated
serial 00:03: activated
sd 1:0:0:0: [sdb] Starting disk
sd 3:0:0:0: [sdc] Starting disk
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 3-2: reset low-speed USB device number 6 using ohci-pci
ata6.00: configured for UDMA/100
PM: resume of devices complete after 801.632 msecs
rtl8192cu: Chip version 0x10
rtl8192cu: MAC address: 80:1f:02:ee:81:4f
rtl8192cu: Board Type 0
rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
ieee80211 phy1: Selected rate control algorithm 'rtl_rc'
PM: Finishing wakeup.
Restarting tasks ... done.
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
usb 3-1: new low-speed USB device number 7 using ohci-pci
input: Microsoft Wired Keyboard 400 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:045E:0752.0006/input/input29
hid-generic 0003:045E:0752.0006: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 400] on usb-0000:00:12.0-1/input0
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
wlan0: authenticate with 00:1a:3f:86:73:eb
wlan0: send auth to 00:1a:3f:86:73:eb (try 1/3)
wlan0: authenticated
wlan0: associate with 00:1a:3f:86:73:eb (try 1/3)
wlan0: RX AssocResp from 00:1a:3f:86:73:eb (capab=0x411 status=0 aid=2)
wlan0: associated
wlan0: deauthenticating from 00:1a:3f:86:73:eb by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link up
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link up
usb 2-1: new high-speed USB device number 8 using ehci-pci
usb-storage 2-1:1.0: USB Mass Storage device detected
usb-storage 2-1:1.0: Quirks match for vid 05e3 pid 0723: 8000
scsi host10: usb-storage 2-1:1.0
scsi 10:0:0:0: Direct-Access Generic STORAGE DEVICE 9451 PQ: 0 ANSI: 0
sd 10:0:0:0: [sdd] 7626752 512-byte logical blocks: (3.90 GB/3.63 GiB)
sd 10:0:0:0: [sdd] Write Protect is off
sd 10:0:0:0: [sdd] Mode Sense: 03 00 00 00
sd 10:0:0:0: [sdd] No Caching mode page found
sd 10:0:0:0: [sdd] Assuming drive cache: write through
sdd: unknown partition table
sd 10:0:0:0: [sdd] Attached SCSI removable disk
sdd: unknown partition table
sdd: sdd1
sdd: sdd1
usb 2-1: USB disconnect, device number 8
usb 2-1: new high-speed USB device number 9 using ehci-pci
usb-storage 2-1:1.0: USB Mass Storage device detected
usb-storage 2-1:1.0: Quirks match for vid 05e3 pid 0723: 8000
scsi host11: usb-storage 2-1:1.0
scsi 11:0:0:0: Direct-Access Generic STORAGE DEVICE 9451 PQ: 0 ANSI: 0
sd 11:0:0:0: [sdd] 7626752 512-byte logical blocks: (3.90 GB/3.63 GiB)
sd 11:0:0:0: [sdd] Write Protect is off
sd 11:0:0:0: [sdd] Mode Sense: 03 00 00 00
sd 11:0:0:0: [sdd] No Caching mode page found
sd 11:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1 sdd2 sdd3 < sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13 >
sd 11:0:0:0: [sdd] Attached SCSI removable disk
sdd: sdd1 sdd2 sdd3 < sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13 >
usb 2-1: USB disconnect, device number 9
r8169 0000:02:00.0 eth0: link down
usb 3-1: USB disconnect, device number 7
usb 3-2: USB disconnect, device number 6
usb 3-2: new low-speed USB device number 8 using ohci-pci
input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:045E:00CB.0007/input/input30
hid-generic 0003:045E:00CB.0007: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:12.0-2/input0
usb 3-1: new low-speed USB device number 9 using ohci-pci
input: Microsoft Wired Keyboard 400 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:045E:0752.0008/input/input31
hid-generic 0003:045E:0752.0008: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 400] on usb-0000:00:12.0-1/input0
r8169 0000:02:00.0 eth0: link up
usb 5-1: new full-speed USB device number 2 using ohci-pci
usbcore: registered new interface driver ftdi_sio
ftdi_sio 5-1:1.0: FTDI USB Serial Device converter detected
usb 5-1: Detected FT232RL
usb 5-1: FTDI USB Serial Device converter now attached to ttyUSB1
ttyUSB1: 2 input overrun(s)
ttyUSB1: 3684 input overrun(s)
usb 2-2: USB disconnect, device number 5
usb 2-2: new high-speed USB device number 11 using ehci-pci
usb-storage 2-2:1.0: USB Mass Storage device detected
usb-storage 2-2:1.0: Quirks match for vid 05e3 pid 0723: 8000
scsi host12: usb-storage 2-2:1.0
scsi 12:0:0:0: Direct-Access Generic STORAGE DEVICE 9451 PQ: 0 ANSI: 0
sd 12:0:0:0: [sdd] 7626752 512-byte logical blocks: (3.90 GB/3.63 GiB)
sd 12:0:0:0: [sdd] Write Protect is off
sd 12:0:0:0: [sdd] Mode Sense: 03 00 00 00
sd 12:0:0:0: [sdd] No Caching mode page found
sd 12:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1 sdd2 sdd3 < sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13 >
sd 12:0:0:0: [sdd] Attached SCSI removable disk
ftdi_sio ttyUSB1: usb_serial_generic_read_bulk_callback - nonzero urb status: -62
ftdi_sio ttyUSB1: usb_serial_generic_read_bulk_callback - nonzero urb status: -62
ftdi_sio ttyUSB1: usb_serial_generic_read_bulk_callback - nonzero urb status: -62
ftdi_sio ttyUSB1: usb_serial_generic_read_bulk_callback - nonzero urb status: -62
ftdi_sio ttyUSB1: usb_serial_generic_read_bulk_callback - nonzero urb status: -84
ftdi_sio ttyUSB1: usb_serial_generic_read_bulk_callback - nonzero urb status: -62
ftdi_sio ttyUSB1: usb_serial_generic_read_bulk_callback - nonzero urb status: -62
usb usb5-port1: disabled by hub (EMI?), re-enabling...
usb 5-1: USB disconnect, device number 2
ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
ftdi_sio 5-1:1.0: device disconnected
usb 5-1: new full-speed USB device number 3 using ohci-pci
usb 5-1: new full-speed USB device number 4 using ohci-pci
ftdi_sio 5-1:1.0: FTDI USB Serial Device converter detected
usb 5-1: Detected FT232RL
usb 5-1: FTDI USB Serial Device converter now attached to ttyUSB1
ftdi_sio ttyUSB1: usb_serial_generic_read_bulk_callback - nonzero urb status: -62
usb 5-1: USB disconnect, device number 4
ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
ftdi_sio 5-1:1.0: device disconnected
sdd: sdd1 sdd2
sdd: detected capacity change from 3904897024 to 0
usb 2-2: USB disconnect, device number 11
usb 5-2: new full-speed USB device number 5 using ohci-pci
ftdi_sio 5-2:1.0: FTDI USB Serial Device converter detected
usb 5-2: Detected FT232RL
usb 5-2: FTDI USB Serial Device converter now attached to ttyUSB1
ttyUSB1: 1 input overrun(s)
ttyUSB1: 5 input overrun(s)
usb 2-1: new high-speed USB device number 14 using ehci-pci
usb-storage 2-1:1.0: USB Mass Storage device detected
usb-storage 2-1:1.0: Quirks match for vid 05e3 pid 0723: 8000
scsi host13: usb-storage 2-1:1.0
scsi 13:0:0:0: Direct-Access Generic STORAGE DEVICE 9451 PQ: 0 ANSI: 0
sd 13:0:0:0: [sdd] 7626752 512-byte logical blocks: (3.90 GB/3.63 GiB)
sd 13:0:0:0: [sdd] Write Protect is off
sd 13:0:0:0: [sdd] Mode Sense: 03 00 00 00
sd 13:0:0:0: [sdd] No Caching mode page found
sd 13:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1 sdd2
sd 13:0:0:0: [sdd] Attached SCSI removable disk
EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1: USB disconnect, device number 14
usb 2-1: new high-speed USB device number 15 using ehci-pci
usb-storage 2-1:1.0: USB Mass Storage device detected
usb-storage 2-1:1.0: Quirks match for vid 05e3 pid 0723: 8000
scsi host14: usb-storage 2-1:1.0
scsi 14:0:0:0: Direct-Access Generic STORAGE DEVICE 9451 PQ: 0 ANSI: 0
sd 14:0:0:0: [sdd] 7626752 512-byte logical blocks: (3.90 GB/3.63 GiB)
sd 14:0:0:0: [sdd] Write Protect is off
sd 14:0:0:0: [sdd] Mode Sense: 03 00 00 00
sd 14:0:0:0: [sdd] No Caching mode page found
sd 14:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1 sdd2
sd 14:0:0:0: [sdd] Attached SCSI removable disk
EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1: USB disconnect, device number 15
usb 2-1: new high-speed USB device number 16 using ehci-pci
usb-storage 2-1:1.0: USB Mass Storage device detected
usb-storage 2-1:1.0: Quirks match for vid 05e3 pid 0723: 8000
scsi host15: usb-storage 2-1:1.0
scsi 15:0:0:0: Direct-Access Generic STORAGE DEVICE 9451 PQ: 0 ANSI: 0
sd 15:0:0:0: [sdd] 7626752 512-byte logical blocks: (3.90 GB/3.63 GiB)
sd 15:0:0:0: [sdd] Write Protect is off
sd 15:0:0:0: [sdd] Mode Sense: 03 00 00 00
sd 15:0:0:0: [sdd] No Caching mode page found
sd 15:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1 sdd2
sd 15:0:0:0: [sdd] Attached SCSI removable disk
sdd: sdd1 sdd2
sdd: sdd1 sdd2
sdd: sdd1 sdd2
sdd: sdd1 sdd2
sdd: sdd1 sdd2
sdd: sdd1 sdd2
usb 2-1: USB disconnect, device number 16
usb 5-2: USB disconnect, device number 5
ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
ftdi_sio 5-2:1.0: device disconnected