dmesg - 192.168.122.116_apache_16_10
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@batsu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 (Ubuntu 3.13.0-24.47-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001f4fdfff] usable
BIOS-e820: [mem 0x000000001f4fe000-0x000000001f4fffff] reserved
BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Hypervisor detected: KVM
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x1f4fe max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask FF80000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
found SMP MP-table at [mem 0x000f0ad0-0x000f0adf] mapped at [ffff8800000f0ad0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x1f200000-0x1f3fffff]
[mem 0x1f200000-0x1f3fffff] page 2M
init_memory_mapping: [mem 0x1c000000-0x1f1fffff]
[mem 0x1c000000-0x1f1fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1bffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1bffffff] page 2M
init_memory_mapping: [mem 0x1f400000-0x1f4fdfff]
[mem 0x1f400000-0x1f4fdfff] page 4k
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
RAMDISK: [mem 0x1d8b4000-0x1eb10fff]
ACPI: RSDP 00000000000f0920 000014 (v00 BOCHS )
ACPI: RSDT 000000001f4ffc2a 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 000000001f4ff1c0 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 000000001f4fe040 001180 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
ACPI: FACS 000000001f4fe000 000040
ACPI: SSDT 000000001f4ff234 00093E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 000000001f4ffb72 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: HPET 000000001f4ffbf2 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000001f4fdfff]
Initmem setup node 0 [mem 0x00000000-0x1f4fdfff]
NODE_DATA [mem 0x1f4f9000-0x1f4fdfff]
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 0:1f4f5001, boot clock
[ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001d000000-ffff88001d7fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x1f4fdfff]
On node 0 totalpages: 128156
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 1940 pages used for memmap
DMA32 zone: 124158 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x1f500000-0xfeffbfff] available for PCI devices
Booting paravirtualized kernel on KVM
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88001f200000 s86336 r8192 d24256 u1048576
pcpu-alloc: s86336 r8192 d24256 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
kvm-clock: cpu 0, msr 0:1f4f5001, primary cpu clock
KVM setup async PF for cpu 0
kvm-stealtime: cpu 0, msr 1f20dfc0
Built 1 zonelists in Node order, mobility grouping on. Total pages: 126131
Policy zone: DMA32
PID hash table entries: 2048 (order: 2, 16384 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 468772K/512624K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 43852K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-1.
NR_IRQS:16640 nr_irqs:512 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 2097152 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Detected 2333.414 MHz processor
Calibrating delay loop (skipped) preset value.. 4666.82 BogoMIPS (lpj=9333656)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
mce: CPU supports 10 MCE banks
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
Enabling x2apic
Enabled x2apic
Switched APIC routing to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel QEMU Virtual CPU version 2.0.0 (fam: 06, model: 06, stepping: 03)
APIC calibration not consistent with PM-Timer: 103ms instead of 100ms
APIC delta adjusted to PM-Timer: 6250101 (6499596)
Performance Events: Broken PMU hardware detected, using software events only.
Failed to access perfctr msr (MSR c1 is 0)
NMI watchdog: disabled (cpu0): hardware events not enabled
x86: Booting SMP configuration:
kvm-clock: cpu 1, msr 0:1f4f5041, secondary cpu clock
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (9333.65 BogoMIPS)
KVM setup async PF for cpu 1
kvm-stealtime: cpu 1, msr 1f30dfc0
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 20:24:52, date: 03/03/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xadff]
pci_bus 0000:00: root bus resource [io 0xae0f-0xaeff]
pci_bus 0000:00: root bus resource [io 0xaf20-0xafdf]
pci_bus 0000:00: root bus resource [io 0xafe4-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x1f500000-0xfebfffff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
pci 0000:00:01.1: reg 0x20: [io 0xc060-0xc06f]
pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
pci 0000:00:01.2: reg 0x20: [io 0xc000-0xc01f]
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
pci 0000:00:02.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [io 0xc020-0xc03f]
pci 0000:00:03.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
pci 0000:00:04.0: [1af4:1002] type 00 class 0x00ff00
pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc05f]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
ACPI: Enabled 16 GPEs in block 00 to 0F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x1f4fe000-0x1fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 100.000000 MHz counter
Switched to clocksource kvm-clock
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:03: [dma 2]
pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp: PnP ACPI: found 6 devices
ACPI: bus type PNP unregistered
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xadff]
pci_bus 0000:00: resource 6 [io 0xae0f-0xaeff]
pci_bus 0000:00: resource 7 [io 0xaf20-0xafdf]
pci_bus 0000:00: resource 8 [io 0xafe4-0xffff]
pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 10 [mem 0x1f500000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18804K (ffff88001d8b4000 - ffff88001eb11000)
microcode: CPU0 sig=0x663, pf=0x1, revision=0x1
microcode: CPU1 sig=0x663, pf=0x1, revision=0x1
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1425432294.046:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 952
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xfc000000, mapped to 0xffffc90000100000, using 1408k, total 1408k
efifb: mode is 800x600x24, linelength=2400, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
intel_idle: does not run on family 6 model 6
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc060 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc068 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
virtio-pci 0000:00:03.0: irq 40 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 41 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 42 for MSI/MSI-X
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
ata1.01: NODEV after polling detection
ata1.00: ATA-7: QEMU HARDDISK, 2.0.0, max UDMA/100
ata1.00: 83886080 sectors, multi 16: LBA48
ata1.00: configured for MWDMA2
scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.0. PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 83886080 512-byte logical blocks: (42.9 GB/40.0 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb usb1: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
sd 0:0:0:0: Attached scsi generic sg0 type 0
usb usb1: SerialNumber: 0000:00:01.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 7:701:446
rtc_cmos 00:00: setting system clock to 2015-03-03 20:24:54 UTC (1425414294)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
tsc: Refined TSC clocksource calibration: 2333.428 MHz
systemd-udevd[101]: starting version 204
FDC 0 is a S82078B
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
random: nonblocking pool is initialized
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): 3 orphan inodes deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
init: plymouth-upstart-bridge main process (154) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (162) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (167) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (168) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 508924k swap on /dev/sda5. Priority:-1 extents:1 across:508924k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-udevd[293]: starting version 204
type=1400 audit(1425414338.269:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=336 comm="apparmor_parser"
type=1400 audit(1425414338.269:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=336 comm="apparmor_parser"
type=1400 audit(1425414338.269:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=336 comm="apparmor_parser"
type=1400 audit(1425414338.269:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=336 comm="apparmor_parser"
type=1400 audit(1425414338.269:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=336 comm="apparmor_parser"
type=1400 audit(1425414338.269:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=336 comm="apparmor_parser"
piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
lp: driver loaded but no devices found
[drm] Initialized drm 1.1.0 20060810
checking generic (fc000000 160000) vs hw (fc000000 2000000)
fb: conflicting fb hw usage cirrusdrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
[TTM] Zone kernel: Available graphics memory: 244878 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] fb mappable at 0x0
[drm] vram aper at 0x0
[drm] size 0
[drm] fb depth is 24
[drm] pitch is 3072
fbcon: cirrusdrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
cirrus 0000:00:02.0: fb0: cirrusdrmfb frame buffer device
cirrus 0000:00:02.0: registered panic notifier
[drm] Initialized cirrus 1.0.0 20110418 for 0000:00:02.0 on minor 0
init: failsafe main process (522) killed by TERM signal
type=1400 audit(1425414347.753:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=774 comm="apparmor_parser"
type=1400 audit(1425414347.753:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=774 comm="apparmor_parser"
type=1400 audit(1425414347.753:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=774 comm="apparmor_parser"
type=1400 audit(1425414347.753:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=774 comm="apparmor_parser"
type=1400 audit(1425414347.753:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=774 comm="apparmor_parser"
type=1400 audit(1425414347.785:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=774 comm="apparmor_parser"
type=1400 audit(1425414347.789:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=776 comm="apparmor_parser"
hrtimer: interrupt took 50620961 ns
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (921) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
[sched_delayed] sched: RT throttling activated