dmesg - 3.18.0-10-exton
CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.18.0-10-exton (root@mate-u) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #11 SMP Fri Jan 23 17:09:14 CET 2015 (Ubuntu 3.18.0-10.11-exton 3.18.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000a8a7efff] usable
BIOS-e820: [mem 0x00000000a8a7f000-0x00000000a917efff] type 20
BIOS-e820: [mem 0x00000000a917f000-0x00000000a9d7efff] reserved
BIOS-e820: [mem 0x00000000a9d7f000-0x00000000a9e7efff] ACPI NVS
BIOS-e820: [mem 0x00000000a9e7f000-0x00000000a9efefff] ACPI data
BIOS-e820: [mem 0x00000000a9eff000-0x00000000a9efffff] usable
BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ffa50000-0x00000000ffa6efff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000024f5fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.10 by HPQ
efi: ACPI=0xa9efe000 ACPI 2.0=0xa9efe014 SMBIOS=0xa922f298
efi: mem00: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000058000) (0MB)
efi: mem01: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000000058000-0x0000000000059000) (0MB)
efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000059000-0x000000000009d000) (0MB)
efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009d000-0x00000000000a0000) (0MB)
efi: mem04: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x00000000014d7000) (19MB)
efi: mem05: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000014d7000-0x0000000002000000) (11MB)
efi: mem06: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000002000000-0x00000000033d7000) (19MB)
efi: mem07: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000033d7000-0x000000003457e000) (785MB)
efi: mem08: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000003457e000-0x00000000362b7000) (29MB)
efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000362b7000-0x0000000073d96000) (986MB)
efi: mem10: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000073d96000-0x000000009ca80000) (652MB)
efi: mem11: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009ca80000-0x000000009caa0000) (0MB)
efi: mem12: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009caa0000-0x000000009da63000) (15MB)
efi: mem13: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x000000009da63000-0x000000009db4d000) (0MB)
efi: mem14: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009db4d000-0x000000009e28e000) (7MB)
efi: mem15: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009e28e000-0x000000009fa70000) (23MB)
efi: mem16: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009fa70000-0x000000009fa7f000) (0MB)
efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009fa7f000-0x00000000a53cd000) (89MB)
efi: mem18: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a53cd000-0x00000000a5c81000) (8MB)
efi: mem19: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5c81000-0x00000000a5c8d000) (0MB)
efi: mem20: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5c8d000-0x00000000a5cf4000) (0MB)
efi: mem21: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5cf4000-0x00000000a5cfa000) (0MB)
efi: mem22: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5cfa000-0x00000000a5cfe000) (0MB)
efi: mem23: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5cfe000-0x00000000a5cff000) (0MB)
efi: mem24: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5cff000-0x00000000a5ddf000) (0MB)
efi: mem25: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5ddf000-0x00000000a5de0000) (0MB)
efi: mem26: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5de0000-0x00000000a5deb000) (0MB)
efi: mem27: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5deb000-0x00000000a5def000) (0MB)
efi: mem28: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5def000-0x00000000a5df0000) (0MB)
efi: mem29: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5df0000-0x00000000a5df2000) (0MB)
efi: mem30: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5df2000-0x00000000a5df3000) (0MB)
efi: mem31: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5df3000-0x00000000a5df4000) (0MB)
efi: mem32: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5df4000-0x00000000a5e2a000) (0MB)
efi: mem33: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5e2a000-0x00000000a5ecc000) (0MB)
efi: mem34: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5ecc000-0x00000000a6008000) (1MB)
efi: mem35: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a6008000-0x00000000a6044000) (0MB)
efi: mem36: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a6044000-0x00000000a6063000) (0MB)
efi: mem37: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a6063000-0x00000000a6064000) (0MB)
efi: mem38: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a6064000-0x00000000a607e000) (0MB)
efi: mem39: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a607e000-0x00000000a607f000) (0MB)
efi: mem40: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a607f000-0x00000000a6478000) (3MB)
efi: mem41: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a6478000-0x00000000a647f000) (0MB)
efi: mem42: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a647f000-0x00000000a6480000) (0MB)
efi: mem43: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a6480000-0x00000000a648a000) (0MB)
efi: mem44: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000a648a000-0x00000000a6494000) (0MB)
efi: mem45: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a6494000-0x00000000a6495000) (0MB)
efi: mem46: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a6495000-0x00000000a649a000) (0MB)
efi: mem47: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a649a000-0x00000000a649c000) (0MB)
efi: mem48: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a649c000-0x00000000a649d000) (0MB)
efi: mem49: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a649d000-0x00000000a64a3000) (0MB)
efi: mem50: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a64a3000-0x00000000a64a4000) (0MB)
efi: mem51: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a64a4000-0x00000000a659f000) (0MB)
efi: mem52: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a659f000-0x00000000a65a1000) (0MB)
efi: mem53: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a65a1000-0x00000000a65a2000) (0MB)
efi: mem54: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a65a2000-0x00000000a65a3000) (0MB)
efi: mem55: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a65a3000-0x00000000a8a7f000) (36MB)
efi: mem56: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000a8a7f000-0x00000000a8f89000) (5MB)
efi: mem57: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000a8f89000-0x00000000a917f000) (1MB)
efi: mem58: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000a917f000-0x00000000a921c000) (0MB)
efi: mem59: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000a921c000-0x00000000a937f000) (1MB)
efi: mem60: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000a937f000-0x00000000a9c60000) (8MB)
efi: mem61: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000a9c60000-0x00000000a9cfe000) (0MB)
efi: mem62: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000a9cfe000-0x00000000a9d01000) (0MB)
efi: mem63: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000a9d01000-0x00000000a9d7f000) (0MB)
efi: mem64: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000a9d7f000-0x00000000a9e5b000) (0MB)
efi: mem65: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000a9e5b000-0x00000000a9e7f000) (0MB)
efi: mem66: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a9e7f000-0x00000000a9ec0000) (0MB)
efi: mem67: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a9ec0000-0x00000000a9eff000) (0MB)
efi: mem68: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a9eff000-0x00000000a9f00000) (0MB)
efi: mem69: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000024f600000) (5366MB)
efi: mem70: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
efi: mem71: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem72: [Memory Mapped I/O |RUN| | | | | | | | ] range=[0x00000000ffa50000-0x00000000ffa6f000) (0MB)
SMBIOS 2.7 present.
DMI: Hewlett-Packard HP ProBook 450 G2/2248, BIOS M74 Ver. 01.05 09/20/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x24f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00FF800000 mask 7FFF800000 write-protect
1 base 0000000000 mask 7F80000000 write-back
2 base 0080000000 mask 7FC0000000 write-back
3 base 00B0000000 mask 7FF0000000 uncachable
4 base 00AC000000 mask 7FFC000000 uncachable
5 base 00AB800000 mask 7FFF800000 uncachable
6 base 0100000000 mask 7F00000000 write-back
7 base 0200000000 mask 7FC0000000 write-back
8 base 0240000000 mask 7FE0000000 write-back
9 base 0250000000 mask 7FF0000000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xa9f00 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02fe4000, 0x02fe4fff] PGTABLE
BRK [0x02fe5000, 0x02fe5fff] PGTABLE
BRK [0x02fe6000, 0x02fe6fff] PGTABLE
init_memory_mapping: [mem 0x24f400000-0x24f5fffff]
[mem 0x24f400000-0x24f5fffff] page 2M
BRK [0x02fe7000, 0x02fe7fff] PGTABLE
init_memory_mapping: [mem 0x24c000000-0x24f3fffff]
[mem 0x24c000000-0x24f3fffff] page 2M
init_memory_mapping: [mem 0x200000000-0x24bffffff]
[mem 0x200000000-0x23fffffff] page 1G
[mem 0x240000000-0x24bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xa8a7efff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xa89fffff] page 2M
[mem 0xa8a00000-0xa8a7efff] page 4k
init_memory_mapping: [mem 0xa9eff000-0xa9efffff]
[mem 0xa9eff000-0xa9efffff] page 4k
BRK [0x02fe8000, 0x02fe8fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x3457e000-0x362b6fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000A9EFE014 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000A9EFD0E8 0000AC (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP 0x00000000A9EFB000 00010C (v05 HPQOEM 2248 00000001 HP 00000001)
ACPI: DSDT 0x00000000A9ED0000 0250CF (v02 HPQOEM 2248 00000001 INTL 20130927)
ACPI: FACS 0x00000000A9E66000 000040
ACPI: HPET 0x00000000A9EFA000 000038 (v01 HPQOEM 2248 00000001 HP 00000001)
ACPI: APIC 0x00000000A9EF9000 0000BC (v01 HPQOEM 2248 00000001 HP 00000001)
ACPI: MCFG 0x00000000A9EF8000 00003C (v01 HPQOEM 2248 00000001 HP 00000001)
ACPI: ASF! 0x00000000A9EF7000 0000A5 (v32 HPQOEM 2248 00000001 HP 00000001)
ACPI: TCPA 0x00000000A9EF6000 000032 (v02 HPQOEM 2248 00000000 HP 00000001)
ACPI: SSDT 0x00000000A9ECD000 0003D4 (v01 HPQOEM SataAhci 00001000 INTL 20130927)
ACPI: SSDT 0x00000000A9ECC000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20130927)
ACPI: SLIC 0x00000000A9ECB000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: MSDM 0x00000000A9ECA000 000055 (v03 HPQOEM SLIC-MPC 00000000 HP 00000001)
ACPI: FPDT 0x00000000A9EC9000 000044 (v01 HPQOEM 2248 00000001 HP 00000001)
ACPI: BGRT 0x00000000A9EC8000 000038 (v00 HPQOEM 2248 00000001 HP 00000001)
ACPI: SSDT 0x00000000A9EC4000 00041E (v01 Isct IsctAsl 00003000 INTL 20130927)
ACPI: SSDT 0x00000000A9EC3000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20130927)
ACPI: SSDT 0x00000000A9EC2000 000B8F (v01 CpuRef CpuSsdt 00003000 INTL 20130927)
ACPI: SSDT 0x00000000A9EC1000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20130927)
ACPI: SSDT 0x00000000A9EC0000 000921 (v01 SaSsdt SaSsdt 00003000 INTL 20130927)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000024f5fffff]
NODE_DATA(0) allocated [mem 0x24f5f9000-0x24f5fdfff]
Reserving 128MB of memory at 704MB for crashkernel (System RAM: 8064MB)
[ffffea0000000000-ffffea00093fffff] PMD -> [ffff880246c00000-ffff88024ebfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x24f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00057fff]
node 0: [mem 0x00059000-0x0009cfff]
node 0: [mem 0x00100000-0xa8a7efff]
node 0: [mem 0xa9eff000-0xa9efffff]
node 0: [mem 0x100000000-0x24f5fffff]
Initmem setup node 0 [mem 0x00001000-0x24f5fffff]
On node 0 totalpages: 2064411
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 10730 pages used for memmap
DMA32 zone: 686720 pages, LIFO batch:31
Normal zone: 21464 pages used for memmap
Normal zone: 1373696 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xada00000-0xaf9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xa8a7f000-0xa917efff]
PM: Registered nosave memory: [mem 0xa917f000-0xa9d7efff]
PM: Registered nosave memory: [mem 0xa9d7f000-0xa9e7efff]
PM: Registered nosave memory: [mem 0xa9e7f000-0xa9efefff]
PM: Registered nosave memory: [mem 0xa9f00000-0xad9fffff]
PM: Registered nosave memory: [mem 0xada00000-0xaf9fffff]
PM: Registered nosave memory: [mem 0xafa00000-0xe00f7fff]
PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xffa4ffff]
PM: Registered nosave memory: [mem 0xffa50000-0xffa6efff]
PM: Registered nosave memory: [mem 0xffa6f000-0xffffffff]
e820: [mem 0xafa00000-0xe00f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff88024f200000 s83904 r8192 d30784 u262144
pcpu-alloc: s83904 r8192 d30784 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2032131
Policy zone: Normal
PCIe ASPM is forcibly enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7794968K/8257644K available (7907K kernel code, 1220K rwdata, 3688K rodata, 1392K init, 1324K bss, 462676K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:760 0
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.426 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.85 BogoMIPS (lpj=9577704)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140926
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff82e8f000 - ffffffff82e97000)
ftrace: allocating 29649 entries in 116 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (fam: 06, model: 45, stepping: 01)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
#3[ 0.167567] x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19155.40 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xa9d7f000-0xa9e7efff] (1048576 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 11:37:10, date: 02/25/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880243591C00 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20130927)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88024355B000 0005DB (v01 PmRef ApIst 00003000 INTL 20130927)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880243664800 000119 (v01 PmRef ApCst 00003000 INTL 20130927)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [APPR] (off)
ACPI: Power Resource [COMP] (on)
ACPI: Power Resource [LPP] (on)
ACPI: Power Resource [PXP2] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xafa00000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfedfffff]
pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x7000-0x703f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xc0810000-0xc0813fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xc0800000-0xc080ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xc0819000-0xc081901f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xc0814000-0xc0817fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:9c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xc081d000-0xc081d3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x7088-0x708f]
pci 0000:00:1f.2: reg 0x14: [io 0x7094-0x7097]
pci 0000:00:1f.2: reg 0x18: [io 0x7080-0x7087]
pci 0000:00:1f.2: reg 0x1c: [io 0x7090-0x7093]
pci 0000:00:1f.2: reg 0x20: [io 0x7060-0x707f]
pci 0000:00:1f.2: reg 0x24: [mem 0xc081c000-0xc081c7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xc081b000-0xc081bfff 64bit]
pci 0000:00:1c.0: PCI bridge to [bus 01-06]
pci 0000:00:1c.0: bridge window [mem 0xc0700000-0xc07fffff]
pci 0000:07:00.0: [10ec:5227] type 00 class 0xff0000
pci 0000:07:00.0: reg 0x10: [mem 0xc0600000-0xc0600fff]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 07]
pci 0000:00:1c.1: bridge window [io 0x5000-0x6fff]
pci 0000:00:1c.1: bridge window [mem 0xc0600000-0xc06fffff]
pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [io 0x4000-0x40ff]
pci 0000:08:00.0: reg 0x18: [mem 0xc0504000-0xc0504fff 64bit]
pci 0000:08:00.0: reg 0x20: [mem 0xc0500000-0xc0503fff 64bit]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xc0500000-0xc05fffff]
pci 0000:09:00.0: [10ec:b723] type 00 class 0x028000
pci 0000:09:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:09:00.0: reg 0x18: [mem 0xc0400000-0xc0403fff 64bit]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc04fffff]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xa8a7f000-0xabffffff]
e820: reserve RAM buffer [mem 0xa9f00000-0xabffffff]
e820: reserve RAM buffer [mem 0x24f600000-0x24fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xafa10000-0xafa1ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0200-0x020f] has been reserved
system 00:01: [io 0x0220-0x027f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1800-0x18fe] could not be reserved
system 00:01: [io 0xef80-0xef9f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs SYN301e SYN0100 SYN0002 PNP0f13 (active)
pnp 00:05: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
pnp: PnP ACPI: found 6 devices
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: BAR 15: assigned [mem 0xafb00000-0xafcfffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01-06]
pci 0000:00:1c.0: bridge window [mem 0xc0700000-0xc07fffff]
pci 0000:00:1c.1: PCI bridge to [bus 07]
pci 0000:00:1c.1: bridge window [io 0x5000-0x6fff]
pci 0000:00:1c.1: bridge window [mem 0xc0600000-0xc06fffff]
pci 0000:00:1c.1: bridge window [mem 0xafb00000-0xafcfffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xc0500000-0xc05fffff]
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc04fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xafa00000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed3ffff]
pci_bus 0000:00: resource 9 [mem 0xfed45000-0xfedfffff]
pci_bus 0000:00: resource 10 [mem 0xfee01000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xc0700000-0xc07fffff]
pci_bus 0000:07: resource 0 [io 0x5000-0x6fff]
pci_bus 0000:07: resource 1 [mem 0xc0600000-0xc06fffff]
pci_bus 0000:07: resource 2 [mem 0xafb00000-0xafcfffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:08: resource 1 [mem 0xc0500000-0xc05fffff]
pci_bus 0000:09: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:09: resource 1 [mem 0xc0400000-0xc04fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
pci 0000:00:14.0: enabling device (0000 -> 0002)
pci 0000:00:1d.0: enabling device (0000 -> 0002)
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 29924K (ffff88003457e000 - ffff8800362b7000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa13cd000-0xa53cd000] (64MB) mapped at [ffff8800a13cd000-ffff8800a53ccfff]
RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1424864234.264:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 15452
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xb0000000, mapped to 0xffffc90010f00000, using 4160k, total 4160k
efifb: mode is 1366x768x32, linelength=5464, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 170x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [CPUZ] (40 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [GFXZ] (0 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [EXTZ] (0 C)
thermal LNXTHERM:03: registered as thermal_zone3
ACPI: Thermal Zone [LOCZ] (0 C)
thermal LNXTHERM:04: registered as thermal_zone4
ACPI: Thermal Zone [BATZ] (24 C)
thermal LNXTHERM:05: registered as thermal_zone5
ACPI: Thermal Zone [PCHZ] (0 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
tpm_tis 00:05: 1.2 TPM (device-id 0x1A, rev-id 16)
ACPI: Battery Slot [BAT0] (battery present)
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.18.0-10-exton xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 9 ports detected
ACPI Warning: \_SB_.PCI0.XHC_.RHUB.HS04._UPC: Return Package is too small - found 1 elements, expected 4 (20140926/nsprepkg-378)
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.18.0-10-exton xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb: failed to peer usb2-port3 and usb1-port1 by location (usb2-port3:none) (usb1-port1:usb2-port1)
usb usb2-port3: failed to peer to usb1-port1 (-16)
usb: port power management may be unreliable
usb: failed to peer usb2-port4 and usb1-port1 by location (usb2-port4:none) (usb1-port1:usb2-port1)
usb usb2-port4: failed to peer to usb1-port1 (-16)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 17, io mem 0xc081d000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.18.0-10-exton ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: [email protected]
Intel P-state driver initializing.
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: b20b238d13ac30a56f736590db60d00bce9f2c45'
registered taskstats version 1
zswap: loading zswap
zpool: creating pool type zbud
zpool: created zbud pool
zswap: using zbud pool
zswap: lz4 compressor not available
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
usb 1-2: new low-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 3-1: New USB device found, idVendor=8087, idProduct=8000
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
usb 1-2: New USB device found, idVendor=09da, idProduct=000a
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: USB Mouse
usb 1-2: Manufacturer: A4Tech
usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
tsc: Refined TSC clocksource calibration: 2394.457 MHz
usb 1-4: new full-speed USB device number 3 using xhci_hcd
evm: HMAC attrs: 0x1
Magic number: 3:600:631
rtc_cmos 00:02: setting system clock to 2015-02-25 11:37:15 UTC (1424864235)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1392K (ffffffff82d33000 - ffffffff82e8f000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 272K (ffff8800027bc000 - ffff880002800000)
Freeing unused kernel memory: 408K (ffff880002b9a000 - ffff880002c00000)
systemd-udevd[124]: starting version 204
wmi: Mapper loaded
usb 1-4: No LPM exit latency info found, disabling LPM.
usb 1-4: New USB device found, idVendor=0bda, idProduct=b001
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: Bluetooth Radio
usb 1-4: Manufacturer: Realtek
usb 1-4: SerialNumber: 00e04c000001
rtsx_pci 0000:07:00.0: enabling device (0000 -> 0002)
rtsx_pci 0000:07:00.0: irq 45 for MSI/MSI-X
rtsx_pci 0000:07:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 45
[drm] Initialized drm 1.1.0 20060810
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
r8169 0000:08:00.0: irq 47 for MSI/MSI-X
r8169 0000:08:00.0 eth0: RTL8168g/8111g at 0xffffc90000cb8000, 64:51:06:a5:40:82, XID 10900800 IRQ 47
r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Setting dangerous option enable_rc6 - tainting kernel
Setting dangerous option enable_fbc - tainting kernel
Setting dangerous option semaphores - tainting kernel
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xc081c000 port 0xc081c100 irq 46
ata2: SATA max UDMA/133 abar m2048@0xc081c000 port 0xc081c180 irq 46
ata3: DUMMY
ata4: DUMMY
[drm] Memory usable by graphics device = 2048M
checking generic (b0000000 410000) vs hw (b0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] ACPI BIOS requests an excessive sleep of 5000 ms, using 1500 ms instead
i915 0000:00:02.0: irq 48 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
usb 1-5: new full-speed USB device number 4 using xhci_hcd
usb 1-5: New USB device found, idVendor=138a, idProduct=003f
usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-5: SerialNumber: 0030da2fc492
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0CB6Q, max UDMA/133
ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 CB6Q PQ: 0 ANSI: 5
ata2.00: ATAPI: hp DVDRAM GU90N, U900, max UDMA/100
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
ata2.00: configured for UDMA/100
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM hp DVDRAM GU90N U900 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 1-7: new high-speed USB device number 5 using xhci_hcd
usb 1-7: New USB device found, idVendor=04ca, idProduct=7032
usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-7: Product: HP HD Webcam
usb 1-7: Manufacturer: DDZLE019I6Q12D
usb 1-7: SerialNumber: 200901010001
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:09DA:000A.0001/input/input12
a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:14.0-2/input0
Switched to clocksource tsc
psmouse serio3: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x640000/0xa2400, board id: 2654, fw id: 1323623
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input10
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
raid6: sse2x1 8553 MB/s
raid6: sse2x2 10791 MB/s
raid6: sse2x4 12424 MB/s
raid6: avx2x1 16566 MB/s
raid6: avx2x2 19069 MB/s
raid6: avx2x4 22228 MB/s
raid6: using algorithm avx2x4 (22228 MB/s)
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 23542.000 MB/sec
Btrfs loaded
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 72 bits of entropy available
random: nonblocking pool is initialized
Adding 124924k swap on /dev/sda6. Priority:-1 extents:1 across:124924k SSFS
EXT4-fs (sda5): re-mounted. Opts: discard,errors=remount-ro
systemd-udevd[408]: starting version 204
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Initializing HPQ6001 module
input: HP Wireless hotkeys as /devices/virtual/input/input14
hp_accel: laptop model unknown, using default axes configuration
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
audit: type=1400 audit(1424860638.416:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=560 comm="apparmor_parser"
audit: type=1400 audit(1424860638.416:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=560 comm="apparmor_parser"
audit: type=1400 audit(1424860638.420:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=560 comm="apparmor_parser"
mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
usbcore: registered new interface driver btusb
media: Linux media interface: v0.10
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux video capture interface: v2.00
lis3lv02d: 8 bits 3DC sensor found
uvcvideo: Found UVC 1.00 device HP HD Webcam (04ca:7032)
input: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input15
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
cfg80211: Calling CRDA to update world regulatory domain
[drm] GMBUS [i915 gmbus ssc] timed out, falling back to bit banging on pin 1
audit: type=1400 audit(1424860638.536:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=606 comm="apparmor_parser"
audit: type=1400 audit(1424860638.536:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=606 comm="apparmor_parser"
audit: type=1400 audit(1424860638.536:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=606 comm="apparmor_parser"
audit: type=1400 audit(1424860638.536:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=606 comm="apparmor_parser"
audit: type=1400 audit(1424860638.536:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=606 comm="apparmor_parser"
audit: type=1400 audit(1424860638.536:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=606 comm="apparmor_parser"
rtl8723be 0000:09:00.0: enabling device (0000 -> 0003)
rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
device-mapper: multipath: version 1.7.0 loaded
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: rtlwifi: wireless switch is on
snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 51 for MSI/MSI-X
sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: mono: mono_out=0x0
sound hdaudioC1D0: inputs:
sound hdaudioC1D0: Mic=0x19
sound hdaudioC1D0: Internal Mic=0x12
[drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
[drm] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
init: failsafe main process (769) killed by TERM signal
[drm] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6
r8169 0000:08:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
audit_printk_skb: 99 callbacks suppressed
audit: type=1400 audit(1424860639.372:44): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/skype" pid=940 comm="apparmor_parser"
init: alsa-restore main process (1042) terminated with status 99
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
input: HP WMI hotkeys as /devices/virtual/input/input21
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1227) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-stop pre-start process (1352) terminated with status 1
wlan0: authenticate with 9c:d2:4b:54:0e:b3
wlan0: send auth to 9c:d2:4b:54:0e:b3 (try 1/3)
wlan0: authenticated
wlan0: associate with 9c:d2:4b:54:0e:b3 (try 1/3)
wlan0: RX AssocResp from 9c:d2:4b:54:0e:b3 (capab=0x431 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: PL
cfg80211: Regulatory domain changed to country: PL
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
audit: type=1400 audit(1424860640.752:45): apparmor="DENIED" operation="file_inherit" profile="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1521 comm="nm-dhcp-client." lport=6838 family="inet" sock_type="dgram" protocol=17
audit: type=1400 audit(1424860640.752:46): apparmor="DENIED" operation="file_inherit" profile="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1521 comm="nm-dhcp-client." lport=57962 family="inet6" sock_type="dgram" protocol=17
audit: type=1400 audit(1424860640.876:47): apparmor="DENIED" operation="file_inherit" profile="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1540 comm="nm-dhcp-client." lport=6838 family="inet" sock_type="dgram" protocol=17
audit: type=1400 audit(1424860640.876:48): apparmor="DENIED" operation="file_inherit" profile="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1540 comm="nm-dhcp-client." lport=57962 family="inet6" sock_type="dgram" protocol=17
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input22
EXT4-fs (sda5): re-mounted. Opts: discard,errors=remount-ro,commit=0
EXT4-fs (sda5): re-mounted. Opts: discard,errors=remount-ro,commit=0
EXT4-fs (sda5): re-mounted. Opts: discard,errors=remount-ro,commit=0