dmesg - test
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-32-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000a59edfff] usable
BIOS-e820: [mem 0x00000000a59ee000-0x00000000a6176fff] ACPI NVS
BIOS-e820: [mem 0x00000000a6177000-0x00000000a6199fff] usable
BIOS-e820: [mem 0x00000000a619a000-0x00000000a619efff] ACPI NVS
BIOS-e820: [mem 0x00000000a619f000-0x00000000aa7befff] usable
BIOS-e820: [mem 0x00000000aa7bf000-0x00000000aaebefff] reserved
BIOS-e820: [mem 0x00000000aaebf000-0x00000000aafbefff] ACPI NVS
BIOS-e820: [mem 0x00000000aafbf000-0x00000000aaffefff] ACPI data
BIOS-e820: [mem 0x00000000aafff000-0x00000000aaffffff] usable
BIOS-e820: [mem 0x00000000ab000000-0x00000000af9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000014f5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: TOSHIBA SATELLITE PRO C850-10L/Type2 - Board Product Name1, BIOS 6.80 10/01/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x14f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0AB000000 mask FFF000000 uncachable
3 base 0AC000000 mask FFC000000 uncachable
4 base 0B0000000 mask FF0000000 uncachable
5 base 0FFC00000 mask FFFC00000 write-protect
6 base 100000000 mask FC0000000 write-back
7 base 140000000 mask FF0000000 write-back
8 base 14F600000 mask FFFE00000 uncachable
9 base 14F800000 mask FFF800000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xab000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe200-0x000fe20f] mapped at [ffff8800000fe200]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
reserving inaccessible SNB gfx pages
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x14f400000-0x14f5fffff]
[mem 0x14f400000-0x14f5fffff] page 2M
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0x14c000000-0x14f3fffff]
[mem 0x14c000000-0x14f3fffff] page 2M
init_memory_mapping: [mem 0x100000000-0x14bffffff]
[mem 0x100000000-0x14bffffff] page 2M
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x3fffffff]
[mem 0x20200000-0x3fffffff] page 2M
init_memory_mapping: [mem 0x40200000-0xa59edfff]
[mem 0x40200000-0xa57fffff] page 2M
[mem 0xa5800000-0xa59edfff] page 4k
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0xa6177000-0xa6199fff]
[mem 0xa6177000-0xa6199fff] page 4k
init_memory_mapping: [mem 0xa619f000-0xaa7befff]
[mem 0xa619f000-0xa61fffff] page 4k
[mem 0xa6200000-0xaa5fffff] page 2M
[mem 0xaa600000-0xaa7befff] page 4k
init_memory_mapping: [mem 0xaafff000-0xaaffffff]
[mem 0xaafff000-0xaaffffff] page 4k
RAMDISK: [mem 0x35b62000-0x36da8fff]
ACPI: RSDP 00000000000fe020 000024 (v02 TOSASU)
ACPI: XSDT 00000000aaffe210 00009C (v01 TOSASU TOSASU00 00000100 01000013)
ACPI: FACP 00000000aaffa000 00010C (v05 TOSASU TOSASU00 00000100 ACPI 00040000)
ACPI: DSDT 00000000aafdf000 017D26 (v01 TOSASU TOSASU00 00000000 ACPI 00040000)
ACPI: FACS 00000000aafb2000 000040
ACPI: ECDT 00000000aaffd000 0000C1 (v01 TOSASU TOSASU00 00000001 ACPI 00040000)
ACPI: UEFI 00000000aaffc000 000236 (v01 TOSASU TOSASU00 00000001 ACPI 00040000)
ACPI: ASF! 00000000aaffb000 0000A5 (v32 TOSASU TOSASU00 00000001 ACPI 00040000)
ACPI: HPET 00000000aaff9000 000038 (v01 TOSASU TOSASU00 00000001 ACPI 00040000)
ACPI: APIC 00000000aaff8000 00008C (v03 TOSASU TOSASU00 00000001 ACPI 00040000)
ACPI: MCFG 00000000aaff7000 00003C (v01 TOSASU TOSASU00 00000001 ACPI 00040000)
ACPI: SLIC 00000000aafde000 000176 (v01 TOSASU TOSASU00 00000001 ACPI 00040000)
ACPI: WDAT 00000000aafdd000 000224 (v01 TOSASU TOSASU00 00000001 ACPI 00040000)
ACPI: SSDT 00000000aafdb000 001068 (v01 INSYDE CR CRB 00001000 ACPI 00040000)
ACPI: BOOT 00000000aafd9000 000028 (v01 TOSASU TOSASU00 00000001 ACPI 00040000)
ACPI: ASPT 00000000aafd4000 000034 (v07 TOSASU TOSASU00 00000001 ACPI 00040000)
ACPI: FPDT 00000000aafd2000 000044 (v01 TOSASU TOSASU00 00000001 ACPI 00040000)
ACPI: SSDT 00000000aafd1000 0007ED (v01 INSYDE CR CRB 00003000 ACPI 00040000)
ACPI: SSDT 00000000aafd0000 000A92 (v01 INSYDE CR CRB 00003000 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000014f5fffff]
Initmem setup node 0 [mem 0x00000000-0x14f5fffff]
NODE_DATA [mem 0x14f5f6000-0x14f5fafff]
[ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ac00000-ffff88014ebfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x14f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x3fffffff]
node 0: [mem 0x40200000-0xa59edfff]
node 0: [mem 0xa6177000-0xa6199fff]
node 0: [mem 0xa619f000-0xaa7befff]
node 0: [mem 0xaafff000-0xaaffffff]
node 0: [mem 0x100000000-0x14f5fffff]
On node 0 totalpages: 1020366
DMA zone: 64 pages used for memmap
DMA zone: 156 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 10801 pages used for memmap
DMA32 zone: 691250 pages, LIFO batch:31
Normal zone: 5080 pages used for memmap
Normal zone: 325120 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 6 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
PM: Registered nosave memory: [mem 0xa59ee000-0xa6176fff]
PM: Registered nosave memory: [mem 0xa619a000-0xa619efff]
PM: Registered nosave memory: [mem 0xaa7bf000-0xaaebefff]
PM: Registered nosave memory: [mem 0xaaebf000-0xaafbefff]
PM: Registered nosave memory: [mem 0xaafbf000-0xaaffefff]
PM: Registered nosave memory: [mem 0xab000000-0xaf9fffff]
PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88014f200000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1004265
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3913040K/4081464K available (7363K kernel code, 1142K rwdata, 3400K rodata, 1336K init, 1440K bss, 168424K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1596.369 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.73 BogoMIPS (lpj=6385476)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28495 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Celeron(R) CPU B815 @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (6385.47 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xa59ee000-0xa6176fff] (7901184 bytes)
PM: Registering ACPI NVS region [mem 0xa619a000-0xa619efff] (20480 bytes)
PM: Registering ACPI NVS region [mem 0xaaebf000-0xaafbefff] (1048576 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 10:43:24, date: 02/25/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000aae28018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20120111)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20120111)
ACPI: SSDT 00000000aae29a98 000303 (v01 PmRef ApIst 00003000 INTL 20120111)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20120111)
ACPI: SSDT 00000000aae27d98 000119 (v01 PmRef ApCst 00003000 INTL 20120111)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20120111)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xc2000000-0xc23fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xc2500000-0xc250ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xc2514000-0xc251400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xc2519000-0xc25193ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xc2510000-0xc2513fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xc2518000-0xc25183ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
pci 0000:00:1f.2: reg 0x24: [mem 0xc2517000-0xc25177ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xc2515000-0xc25150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8723] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:02:00.0: reg 0x18: [mem 0xc2400000-0xc2403fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc24fffff]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
pci 0000:03:00.0: reg 0x18: [mem 0xc0004000-0xc0004fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xc0000000-0xc0003fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03-08]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0xc1000000-0xc1ffffff]
pci 0000:00:1c.2: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xa59ee000-0xa7ffffff]
e820: reserve RAM buffer [mem 0xa619a000-0xa7ffffff]
e820: reserve RAM buffer [mem 0xaa7bf000-0xabffffff]
e820: reserve RAM buffer [mem 0xab000000-0xabffffff]
e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:04: [io 0x025c-0x025d] has been reserved
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x100f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] could not be reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: Plug and Play ACPI device, IDs TOS0310 TOS0220 TTP0100 PNP0f13 (active)
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: [mem 0xafa00000-0xafa00fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
system 00:0a: [mem 0x40000000-0x401fffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc24fffff]
pci 0000:00:1c.2: PCI bridge to [bus 03-08]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0xc1000000-0xc1ffffff]
pci 0000:00:1c.2: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xc2400000-0xc24fffff]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc1ffffff]
pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc0ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18716K (ffff880035b62000 - ffff880036da9000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa67bf000-0xaa7bf000] (64MB) mapped at [ffff8800a67bf000-ffff8800aa7befff]
Simple Boot Flag at 0x44 set to 0x1
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x26
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x26
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1424861005.392:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 7679
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1366x768x32, linelength=5504, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90010780000, using 4160k, total 4160k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
ACPI: AC Adapter [AC0] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: duty_cycle spans bit 4
ACPI: duty_cycle spans bit 4
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (36 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xc2519000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xc2518000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 5e3c0f9ca6e36543535fa2bb5b709e84f16da7c7'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 3:597:730
rtc_cmos 00:05: setting system clock to 2015-02-25 10:43:26 UTC (1424861006)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)
systemd-udevd[111]: starting version 204
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0: irq 41 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000063a000, e8:40:f2:89:9c:e1, XID 0c900800 IRQ 41
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1d impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xc2517000 port 0xc2517100 irq 42
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xc2517000 port 0xc2517200 irq 42
ata4: SATA max UDMA/133 abar m2048@0xc2517000 port 0xc2517280 irq 42
ata5: SATA max UDMA/133 abar m2048@0xc2517000 port 0xc2517300 irq 42
ata6: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: TOSHIBA MQ01ABD100, AX101U, max UDMA/100
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD1 AX10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 2-1: new high-speed USB device number 2 using ehci-pci
sda: sda1 < sda5 sda6 sda7 > sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
tsc: Refined TSC clocksource calibration: 1596.373 MHz
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: TSSTcorp CDDVDW SN-208AB, TO03, max UDMA/100
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208AB TO03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
usb 3-2: new full-speed USB device number 2 using xhci_hcd
usb 3-2: New USB device found, idVendor=046d, idProduct=c52f
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Receiver
usb 3-2: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input10
hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/input/input11
hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input1
usb 3-3: new full-speed USB device number 3 using xhci_hcd
usb 3-3: New USB device found, idVendor=0930, idProduct=021d
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3: Product: RT Bluetooth Radio
usb 3-3: Manufacturer: Realtek
usb 3-3: SerialNumber: 00e04c000001
usb 1-1.1: new high-speed USB device number 3 using ehci-pci
psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 582762
ata4: SATA link down (SStatus 0 SControl 300)
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
usb 1-1.1: New USB device found, idVendor=0bda, idProduct=0138
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: USB2.0-CRW
usb 1-1.1: Manufacturer: Generic
usb 1-1.1: SerialNumber: 20090516388200000
usbcore: registered new interface driver usb-storage
ums-realtek 1-1.1:1.0: USB Mass Storage device detected
scsi6 : usb-storage 1-1.1:1.0
usbcore: registered new interface driver ums-realtek
usb 1-1.3: new high-speed USB device number 4 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b307
usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-1.3: Product: TOSHIBA Web Camera - HD
usb 1-1.3: Manufacturer: Chicony Electronics Co.,Ltd.
usb 1-1.3: SerialNumber: 0x0001
usb 1-1.1: USB disconnect, device number 3
Switched to clocksource tsc
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 122 bits of entropy available
random: nonblocking pool is initialized
Adding 2047996k swap on /dev/sda5. Priority:-1 extents:1 across:2047996k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[290]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
[drm] Memory usable by graphics device = 2048M
checking generic (b0000000 410000) vs hw (b0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
wmi: Mapper loaded
toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler
toshiba_bluetooth: Re-enabling Toshiba Bluetooth
cfg80211: Calling CRDA to update world regulatory domain
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
i915 0000:00:02.0: irq 44 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usbcore: registered new interface driver btusb
[drm] Wrong MCH_SSKPD value: 0x16040307
[drm] This can cause pipe underruns and display issues.
[drm] Please upgrade your BIOS to fix this.
rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin
fbcon: inteldrmfb (fb0) is primary device
type=1400 audit(1424857418.338:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=364 comm="apparmor_parser"
type=1400 audit(1424857418.342:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=364 comm="apparmor_parser"
type=1400 audit(1424857418.342:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=364 comm="apparmor_parser"
type=1400 audit(1424857418.342:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=364 comm="apparmor_parser"
type=1400 audit(1424857418.342:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=364 comm="apparmor_parser"
type=1400 audit(1424857418.342:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=364 comm="apparmor_parser"
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: wireless switch is on
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b307)
input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input15
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:3e: registered as cooling_device3
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input16
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPXX 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPXX 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
SKU: Nid=0x1d sku_cfg=0x4005822d
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x00000082
SKU: external_amp=0x5
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0x18
Internal Mic=0x12
realtek: No valid SSID, checking pincfg 0x4005822d for NID 0x1d
realtek: Enabling init ASM_ID=0x822d CODEC_ID=10ec0269
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
init: failsafe main process (639) killed by TERM signal
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1424857422.498:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=745 comm="apparmor_parser"
type=1400 audit(1424857422.498:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=745 comm="apparmor_parser"
type=1400 audit(1424857422.498:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=745 comm="apparmor_parser"
type=1400 audit(1424857422.630:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=756 comm="apparmor_parser"
init: cups main process (746) killed by HUP signal
init: cups main process ended, respawning
vmmon: module verification failed: signature and/or required key missing - tainting kernel
/dev/vmmon[985]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[985]: Module vmmon: initialized
audit_printk_skb: 147 callbacks suppressed
type=1400 audit(1424857424.334:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1011 comm="apparmor_parser"
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=56)
Initialized host personality
NET: Registered protocol family 40
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: samba-ad-dc main process (1068) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
/dev/vmnet: open called by PID 1168 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 1172 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 1188 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 1189 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 1192 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
init: plymouth-stop pre-start process (1277) terminated with status 1
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
/dev/vmnet: open called by PID 1135 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
userif-2: sent link down event.
userif-2: sent link up event.
userif-2: sent link down event.
userif-2: sent link up event.
type=1400 audit(1424857453.038:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2498 comm="apparmor_parser"
type=1400 audit(1424857453.038:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2498 comm="apparmor_parser"
type=1400 audit(1424857453.038:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2498 comm="apparmor_parser"
init: anacron main process (917) killed by TERM signal
r8169 0000:03:00.0 eth0: link down
bridge-eth0: disabling the bridge
bridge-eth0: down
bridge-eth0: detached
userif-2: sent link down event.
userif-2: sent link up event.
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
userif-2: sent link down event.
userif-2: sent link up event.
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
/dev/vmnet: open called by PID 1135 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
userif-2: sent link down event.
userif-2: sent link up event.
r8169 0000:03:00.0 eth0: link down
bridge-eth0: disabling the bridge
bridge-eth0: down
bridge-eth0: detached
userif-2: sent link down event.
userif-2: sent link up event.
r8169 0000:03:00.0 eth0: link up
/dev/vmnet: open called by PID 1135 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
userif-2: sent link down event.
userif-2: sent link up event.
usb 3-2: USB disconnect, device number 2
usb 3-2: new full-speed USB device number 4 using xhci_hcd
usb 3-2: New USB device found, idVendor=046d, idProduct=c52f
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Receiver
usb 3-2: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input20
hid-generic 0003:046D:C52F.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/input/input21
hid-generic 0003:046D:C52F.0004: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input1
bridge-eth0: disabling the bridge
bridge-eth0: down
bridge-eth0: detached
userif-2: sent link down event.
userif-2: sent link up event.
init: anacron main process (3391) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 561.178 msecs
PM: late suspend of devices complete after 15.932 msecs
r8169 0000:03:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 95.942 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 40
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
CPU1 is up
ACPI: Waking up from system sleep state S3
toshiba_bluetooth: Re-enabling Toshiba Bluetooth
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 143.697 msecs
PM: early resume of devices complete after 0.135 msecs
mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
rtlwifi: wireless switch is on
r8169 0000:03:00.0: System wakeup disabled by ACPI
toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[drm] Wrong MCH_SSKPD value: 0x16040307
[drm] This can cause pipe underruns and display issues.
[drm] Please upgrade your BIOS to fix this.
/dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445319216285286266 new 18445319214262286265 attempts 1
usb 3-3: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014525d480
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014525d4c0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014525d500
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880036b3f980
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880036b3f9c0
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/100
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 3303.471 msecs
PM: Finishing wakeup.
rtl8723ae 0000:02:00.0: no hotplug settings from platform
r8169 0000:03:00.0: no hotplug settings from platform
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
usb 1-1.1: new high-speed USB device number 5 using ehci-pci
usb 1-1.1: New USB device found, idVendor=0bda, idProduct=0138
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: USB2.0-CRW
usb 1-1.1: Manufacturer: Generic
usb 1-1.1: SerialNumber: 20090516388200000
ums-realtek 1-1.1:1.0: USB Mass Storage device detected
scsi7 : usb-storage 1-1.1:1.0
usb 1-1.1: USB disconnect, device number 5
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
/dev/vmnet: open called by PID 1135 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
bridge-eth0: attached
bridge-eth0: disabling the bridge
bridge-eth0: down
bridge-eth0: detached
userif-2: sent link down event.
userif-2: sent link up event.
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
/dev/vmnet: open called by PID 1135 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
userif-2: sent link down event.
userif-2: sent link up event.
userif-2: sent link down event.
userif-2: sent link up event.
usb 3-2: USB disconnect, device number 4
usb 3-2: new full-speed USB device number 5 using xhci_hcd
usb 3-2: New USB device found, idVendor=046d, idProduct=c52f
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Receiver
usb 3-2: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input28
hid-generic 0003:046D:C52F.0005: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/input/input29
hid-generic 0003:046D:C52F.0006: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input1
init: upstart-udev-bridge main process (285) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (602) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (662) terminated with status 1
init: upstart-file-bridge main process ended, respawning
r8169 0000:03:00.0 eth0: link down
bridge-eth0: disabling the bridge
bridge-eth0: down
bridge-eth0: detached
userif-2: sent link down event.
userif-2: sent link up event.
r8169 0000:03:00.0 eth0: link up
/dev/vmnet: open called by PID 1135 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
userif-2: sent link down event.
userif-2: sent link up event.
r8169 0000:03:00.0 eth0: link down
bridge-eth0: disabling the bridge
bridge-eth0: down
bridge-eth0: detached
userif-2: sent link down event.
userif-2: sent link up event.
r8169 0000:03:00.0 eth0: link up
/dev/vmnet: open called by PID 1135 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
userif-2: sent link down event.
userif-2: sent link up event.
r8169 0000:03:00.0 eth0: link down
bridge-eth0: disabling the bridge
bridge-eth0: down
bridge-eth0: detached
userif-2: sent link down event.
userif-2: sent link up event.
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
userif-2: sent link down event.
userif-2: sent link up event.
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
/dev/vmnet: open called by PID 1135 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
userif-2: sent link down event.
userif-2: sent link up event.
userif-2: sent link down event.
userif-2: sent link up event.
perf samples too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000