dmesg - HDD1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-504.8.1.el6.x86_64 (mockbuild@x86-002.build.bos.redhat.com) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-9) (GCC) ) #1 SMP Fri Dec 19 12:09:25 EST 2014
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
Disabled fast string operations
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fffe000 (ACPI data)
BIOS-e820: 000000003fffe000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fd000000 - 00000000fd800000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xF6100
DMI: Parallels Software International Inc. Parallels Virtual Platform/Parallels Virtual Platform, BIOS 6.8.23717.1100559 01/16/2015
Hypervisor detected: KVM
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FFC0000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000003fff0000
0000000000 - 003fe00000 page 2M
003fe00000 - 003fff0000 page 4k
kernel direct mapping tables up to 3fff0000 @ 8000-b000
RAMDISK: 37066000 - 37fef7c7
ACPI: RSDP 00000000000e8000 00024 (v02 PRLS )
ACPI: XSDT 000000003fff4ac0 00054 (v01 PRLS PRLS_OEM 00000001 INTL 20051216)
ACPI: FACP 000000003fff00c0 000F4 (v03 PRLS PRLS_OEM 00000001 INTL 20051216)
ACPI: DSDT 000000003fff0440 044AF (v02 PRLS PRLSACPI 00001001 INTL 20051216)
ACPI: FACS 000000003fff01c0 00040
ACPI: APIC 000000003fff0200 00216 (v01 PRLS PRLS_OEM 00000001 INTL 20051216)
ACPI: SRAT 000000003fff4900 000D0 (v02 PRLS PRLS_OEM 00000001 INTL 20051216)
ACPI: SSDT 000000003fff4a00 00024 (v02 PRLS PRLSACPI 00001001 INTL 20051216)
ACPI: HPET 000000003fff4a40 00038 (v00 PRLS PRLS_OEM 00000001 INTL 20051216)
ACPI: MCFG 000000003fff4a80 0003C (v01 PRLS PRLS_OEM 00000001 INTL 20051216)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-40000000
SRAT: Node 0 PXM 0 40000000-b0000000
SRAT: hot plug zone found 40000000 - b0000000
SRAT: Node 0 PXM 0 100000000-2100000000
SRAT: Hotplug zone not continuous. Partly ignored
No NUMA configuration found
Faking a node at 0000000000000000-000000003fff0000
Bootmem setup node 0 0000000000000000-000000003fff0000
NODE_DATA [0000000000009000 - 000000000003cfff]
bootmap [000000000003d000 - 0000000000044fff] pages 8
(7 early reservations) ==> bootmem [0000000000 - 003fff0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000202abe4] TEXT DATA BSS ==> [0001000000 - 000202abe4]
#3 [0037066000 - 0037fef7c7] RAMDISK ==> [0037066000 - 0037fef7c7]
#4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#5 [000202b000 - 000202b2d0] BRK ==> [000202b000 - 000202b2d0]
#6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
found SMP MP-table at [ffff8800000ff100] ff100
crashkernel=auto resulted in zero bytes of reserved memory.
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 0:1c27841, boot clock
[ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880002600000-ffff8800033fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000001 -> 0x0000009f
0: 0x00000100 -> 0x0003fff0
On node 0 totalpages: 262030
DMA zone: 56 pages used for memmap
DMA zone: 101 pages reserved
DMA zone: 3841 pages, LIFO batch:0
DMA32 zone: 3528 pages used for memmap
DMA32 zone: 254504 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x10] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x11] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x13] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x15] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x17] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x18] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x19] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x1a] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1b] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x1c] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x1d] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x1e] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x1f] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 dfl edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 32 CPUs, 31 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:bd000000)
Booting paravirtualized kernel on KVM
NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880003400000 s90968 r8192 d23720 u131072
pcpu-alloc: s90968 r8192 d23720 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
kvm-clock: cpu 0, msr 0:3415841, primary cpu clock
Built 1 zonelists in Node order, mobility grouping on. Total pages: 258345
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 996972k/1048512k available (5336k kernel code, 392k absent, 51148k reserved, 7016k data, 1292k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:664
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 4194304 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
TSC: cpu family 6 model 62, tsc initial value = 3947f6103
Detected 2793.268 MHz processor.
Calibrating delay loop (skipped) preset value.. 5586.53 BogoMIPS (lpj=2793268)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 0 MCE banks
alternatives: switching to unfair spinlock
SMP alternatives: switching to UP code
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21918 entries in 86 pages
Enabling x2apic
Enabled x2apic
APIC routing finalized to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.30GHz stepping 04
Performance Events: 16-deep LBR, IvyBridge events, Broken PMU hardware detected, using software events only.
NMI watchdog disabled (cpu0): hardware events not enabled
Brought up 1 CPUs
Total of 1 processors activated (5586.53 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2656 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at 3fffe000 (8192 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 15
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
_OSC request data:1 1f
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 15
PCI: MCFG area at fc000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at fc000000 - fcffffff
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000cffff]
pci_root PNP0A08:00: host bridge window [mem 0xb0000000-0xfbffffff]
pci_root PNP0A08:00: host bridge window [mem 0xfd000000-0xfd7fffff]
pci_root PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with reserved [mem 0x000dc000-0x000fffff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000cffff]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfbffffff]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfd7fffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: reg 10: [io 0x8000-0x801f]
pci 0000:00:05.0: reg 10: [mem 0xee000000-0xee01ffff]
pci 0000:00:05.0: reg 1c: [io 0x8200-0x821f]
pci 0000:00:06.0: reg 10: [mem 0xee040000-0xee05ffff]
pci 0000:00:06.0: reg 1c: [io 0x8400-0x841f]
pci 0000:00:0e.0: reg 10: [io 0xb000-0xb01f]
pci 0000:00:1f.0: quirk: [io 0x4000-0x407f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.1: reg 20: [io 0xe000-0xe00f]
pci 0000:00:1f.2: reg 10: [io 0xe200-0xe207]
pci 0000:00:1f.2: reg 14: [io 0xe400-0xe403]
pci 0000:00:1f.2: reg 18: [io 0xe600-0xe607]
pci 0000:00:1f.2: reg 1c: [io 0xe800-0xe803]
pci 0000:00:1f.2: reg 20: [io 0xea00-0xea0f]
pci 0000:00:1f.2: reg 24: [mem 0xf0100000-0xf0101fff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:01:00.0: reg 10: [io 0x6000-0x601f]
pci 0000:01:00.0: reg 14: [mem 0xb0000000-0xb01fffff pref]
pci 0000:01:00.0: reg 30: [mem 0xe2000000-0xe200ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:01.0: bridge window [io 0x6000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xe2000000-0xedffffff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xdfffffff 64bit pref]
pci 0000:00:01.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:01.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:01.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:01.0: bridge window [mem 0x000c0000-0x000cffff] (subtractive decode)
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xfbffffff] (subtractive decode)
pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfd7fffff] (subtractive decode)
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io 0x9000-0xafff]
pci 0000:00:0a.0: bridge window [mem 0xee100000-0xef0fffff]
pci 0000:00:0a.0: bridge window [mem 0xe0000000-0xe0ffffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xef100000-0xf00fffff]
pci 0000:00:1e.0: bridge window [mem 0xe1000000-0xe1ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000cffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xb0000000-0xfbffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfd000000-0xfd7fffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PX16._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIN._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20090903/pci_link-184)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
hpet0: 8 comparators, 64-bit 16.000000 MHz counter
hpet: hpet2 irq 24 for MSI
Switching to clocksource kvm-clock
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [mem 0xfd000000-0xfd7fffff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0060]
pnp 00:01: [io 0x0064]
pnp 00:01: [irq 1]
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:02: [irq 12]
pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 (active)
pnp 00:03: [io 0x0070-0x0075]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [mem 0xffc00000-0xffffffff]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:06: [io 0x0000-0x000f]
pnp 00:06: [io 0x0080-0x0090]
pnp 00:06: [io 0x0094-0x009f]
pnp 00:06: [io 0x00c0-0x00df]
pnp 00:06: [dma 4]
pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:07: [io 0x0092-0x0093]
pnp 00:07: [io 0x04d0-0x04d1]
pnp 00:07: [io 0x1000-0x107f]
pnp 00:07: [io 0x1300-0x133f]
pnp 00:07: [mem 0xfc000000-0xfcffffff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x00f0-0x00ff]
pnp 00:08: [irq 13]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:09: [mem 0xffc00000-0xffffffff]
pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:0a: [mem 0xfed00000-0xfed003ff]
pnp 00:0a: [irq 0 disabled]
pnp 00:0a: [irq 8]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: [mem 0xffc00000-0xffffffff] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x1000-0x107f] has been reserved
system 00:07: [io 0x1300-0x133f] has been reserved
system 00:07: [mem 0xfc000000-0xfcffffff] has been reserved
pci 0000:01:00.0: address space collision: [mem 0xe2000000-0xe200ffff pref] conflicts with PCI Bus 0000:01 [mem 0xe2000000-0xedffffff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xb0200000-0xb020ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x6000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xe2000000-0xedffffff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xdfffffff 64bit pref]
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io 0x9000-0xafff]
pci 0000:00:0a.0: bridge window [mem 0xee100000-0xef0fffff]
pci 0000:00:0a.0: bridge window [mem 0xe0000000-0xe0ffffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xef100000-0xf00fffff]
pci 0000:00:1e.0: bridge window [mem 0xe1000000-0xe1ffffff 64bit pref]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:0a.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000cffff]
pci_bus 0000:00: resource 8 [mem 0xb0000000-0xfbffffff]
pci_bus 0000:00: resource 9 [mem 0xfd000000-0xfd7fffff]
pci_bus 0000:01: resource 0 [io 0x6000-0x7fff]
pci_bus 0000:01: resource 1 [mem 0xe2000000-0xedffffff]
pci_bus 0000:01: resource 2 [mem 0xb0000000-0xdfffffff 64bit pref]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000cffff]
pci_bus 0000:01: resource 8 [mem 0xb0000000-0xfbffffff]
pci_bus 0000:01: resource 9 [mem 0xfd000000-0xfd7fffff]
pci_bus 0000:02: resource 0 [io 0x9000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xee100000-0xef0fffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe0ffffff pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xef100000-0xf00fffff]
pci_bus 0000:03: resource 2 [mem 0xe1000000-0xe1ffffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000cffff]
pci_bus 0000:03: resource 8 [mem 0xb0000000-0xfbffffff]
pci_bus 0000:03: resource 9 [mem 0xfd000000-0xfd7fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15909k freed
futex hash table entries: 8192 (order: 7, 524288 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1424715148.837:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 1978
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key B874F50D334924E4
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
- Added public key CB445E0DA3EA1F65
- User ID: Red Hat Enterprise Linux Driver Update Program (key 4)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
ACPI: acpi_idle registered with cpuidle
[Firmware Bug]: No valid trip found
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:KBC,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2015-02-23 18:12:29 UTC (1424715149)
Initalizing network drop monitor service
Freeing unused kernel memory: 1292k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 788k freed
Freeing unused kernel memory: 1568k freed
dracut: dracut-004-356.el6
udev: starting version 147
dracut: Starting plymouth daemon
virtio-pci 0000:00:0e.0: enabling device (0000 -> 0001)
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:0e.0: PCI INT B -> GSI 22 (level, low) -> IRQ 22
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
ata2: port disabled. ignoring.
ahci 0000:00:1f.2: version 3.0
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led only slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m8192@0xf0100000 port 0xf0100100 irq 29
ata4: SATA max UDMA/133 abar m8192@0xf0100000 port 0xf0100180 irq 29
ata5: SATA max UDMA/133 abar m8192@0xf0100000 port 0xf0100200 irq 29
ata6: SATA max UDMA/133 abar m8192@0xf0100000 port 0xf0100280 irq 29
ata7: SATA max UDMA/133 abar m8192@0xf0100000 port 0xf0100300 irq 29
ata8: SATA max UDMA/133 abar m8192@0xf0100000 port 0xf0100380 irq 29
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-6: harddisk1, F.3N9K30, max UDMA/100
ata3.00: 104857600 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA harddisk1 F.3N PQ: 0 ANSI: 5
Refined TSC clocksource calibration: 2793.251 MHz.
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
STARTING CRC_T10DIF
sd 2:0:0:0: [sda] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 2:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/sda1
dracut: Loading SELinux policy
type=1404 audit(1424715152.149:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 294969 rules.
SELinux: 2048 avtab hash slots, 294969 rules.
SELinux: 9 users, 12 roles, 4142 types, 228 bools, 1 sens, 1024 cats
SELinux: 81 classes, 294969 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda1, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1424715152.848:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
udev: starting version 147
prl_tg: module license 'Parallels' taints kernel.
Disabling lock debugging due to kernel taint
Parallels Toolgate driver 1.0.0 loaded
prl_tg 0000:00:03.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
detected Parallels ToolGate, base addr 00008000, IRQ 22
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
prl_tg 0000:01:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
detected Parallels Video ToolGate, base addr 00006000, IRQ 21
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
e1000 0000:00:05.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
e1000 0000:00:05.0: setting latency timer to 64
e1000 0000:00:05.0: eth0: (PCI:33MHz:32-bit) 00:1c:42:6f:ea:25
e1000 0000:00:05.0: eth0: Intel(R) PRO/1000 Network Connection
e1000 0000:00:06.0: PCI INT A -> GSI 10 (level, low) -> IRQ 10
e1000 0000:00:06.0: setting latency timer to 64
e1000 0000:00:06.0: eth1: (PCI:33MHz:32-bit) 00:1c:42:6c:5e:c6
e1000 0000:00:06.0: eth1: Intel(R) PRO/1000 Network Connection
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
lpc_ich 0000:00:1f.0: RCBA is disabled by hardware/BIOS, device disabled
ACPI Warning: SystemIO range 0x0000000000004028-0x000000000000402f conflicts with OpRegion 0x0000000000004000-0x000000000000404e (\PMIO) (20090903/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
lpc_ich: Resource conflict(s) found affecting gpio_ich
lpc_ich 0000:00:1f.0: No MFD cells added
sd 2:0:0:0: Attached scsi generic sg0 type 0
udev: renamed network interface eth1 to eth3
udev: renamed network interface eth0 to eth4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
Parallels Linux shared folders filesystem driver 1.0.0 loaded
SELinux: initialized (dev prl_fs, type prl_fs), uses mountpoint labeling
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (7941 buckets, 31764 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
ADDRCONF(NETDEV_UP): eth3: link is not ready
e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
ADDRCONF(NETDEV_UP): eth4: link is not ready
e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
type=1305 audit(1424715160.256:4): audit_pid=1018 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
ADDRCONF(NETDEV_UP): eth3: link is not ready
e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
ADDRCONF(NETDEV_UP): eth4: link is not ready
e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
ADDRCONF(NETDEV_UP): eth3: link is not ready
e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
ADDRCONF(NETDEV_UP): eth4: link is not ready
e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
ADDRCONF(NETDEV_UP): eth4: link is not ready
e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready