dmesg - EVA
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-504.8.1.el6.x86_64 (mockbuild@c6b9.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-11) (GCC) ) #1 SMP Wed Jan 28 21:11:36 UTC 2015
Command line: ro root=/dev/mapper/vg_el6-lv_root rd_NO_LUKS rd_LVM_LV=vg_el6/lv_root rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=us rd_LVM_LV=vg_el6/lv_swap rd_NO_DM LANG=en_US.UTF-8 mem=1500M rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000096c00 (usable)
BIOS-e820: 0000000000096c00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bddcc000 (usable)
BIOS-e820: 00000000bddcc000 - 00000000bddde000 (ACPI data)
BIOS-e820: 00000000bddde000 - 00000000bdddf000 (usable)
BIOS-e820: 00000000bdddf000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000203ffff000 (usable)
e820 remove range: 000000005dc00000 - ffffffffffffffff (usable)
user-defined physical RAM map:
user: 0000000000000000 - 0000000000096c00 (usable)
user: 0000000000096c00 - 00000000000a0000 (reserved)
user: 00000000000f0000 - 0000000000100000 (reserved)
user: 0000000000100000 - 000000005dc00000 (usable)
user: 00000000bddcc000 - 00000000bddde000 (ACPI data)
user: 00000000bdddf000 - 00000000d0000000 (reserved)
user: 00000000fec00000 - 00000000fee10000 (reserved)
user: 00000000ff800000 - 0000000100000000 (reserved)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xF4F40
DMI: HP ProLiant BL460c Gen8, BIOS I31 03/01/2013
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x5dc00 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000C0000000 mask 3FFFC0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000005dc00000
0000000000 - 0040000000 page 1G
0040000000 - 005dc00000 page 2M
kernel direct mapping tables up to 5dc00000 @ 8000-a000
RAMDISK: 36d77000 - 37fef2cf
ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
ACPI: XSDT 00000000bddce880 000EC (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: FACP 00000000bddce9c0 000F4 (v03 HP ProLiant 00000002 Ò? 0000162E)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-611)
ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 (20090903/tbfadt-611)
ACPI: DSDT 00000000bddceac0 02670 (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 00000000bddcc140 00040
ACPI: SPCR 00000000bddcc180 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E)
ACPI: MCFG 00000000bddcc200 0003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 00000000bddcc240 00038 (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: FFFF 00000000bddcc280 00064 (v02 HP ProLiant 00000002 Ò? 0000162E)
ACPI: SPMI 00000000bddcc300 00040 (v05 HP ProLiant 00000001 Ò? 0000162E)
ACPI: ERST 00000000bddcc340 001D0 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: APIC 00000000bddcc540 0026A (v01 HP ProLiant 00000002 00000000)
ACPI: SRAT 00000000bddcc7c0 005C0 (v01 HP Proliant 00000001 Ò? 0000162E)
ACPI: FFFF 00000000bddccd80 00176 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: BERT 00000000bddccf00 00030 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: HEST 00000000bddccf40 000BC (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: DMAR 00000000bddcd000 0053E (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: FFFF 00000000bddce7c0 00030 (v01 HP ProLiant 00000001 00000000)
ACPI: PCCT 00000000bddce800 0006E (v01 HP Proliant 00000001 PH 0000504D)
ACPI: SSDT 00000000bddd1140 00764 (v01 HP DEV_PCI1 00000001 INTL 20120503)
ACPI: SSDT 00000000bddd18c0 00137 (v03 HP CRSPCI0 00000002 HP 00000001)
ACPI: SSDT 00000000bddd1a00 00098 (v03 HP CRSPCI1 00000002 HP 00000001)
ACPI: SSDT 00000000bddd1ac0 00413 (v03 HP embedded 00000002 INTL 20030228)
ACPI: SSDT 00000000bddd1f00 0038A (v02 HP riser0 00000002 INTL 20030228)
ACPI: SSDT 00000000bddd22c0 00263 (v03 HP embedde2 00000002 INTL 20030228)
ACPI: SSDT 00000000bddd2540 00BB9 (v01 HP pcc 00000001 INTL 20120503)
ACPI: SSDT 00000000bddd3100 00377 (v01 HP pmab 00000001 INTL 20120503)
ACPI: SSDT 00000000bddd3480 05524 (v01 HP pcc2 00000001 INTL 20120503)
ACPI: SSDT 00000000bddd89c0 04E24 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 0 -> APIC 5 -> Node 0
SRAT: PXM 0 -> APIC 6 -> Node 0
SRAT: PXM 0 -> APIC 7 -> Node 0
SRAT: PXM 0 -> APIC 8 -> Node 0
SRAT: PXM 0 -> APIC 9 -> Node 0
SRAT: PXM 0 -> APIC 10 -> Node 0
SRAT: PXM 0 -> APIC 11 -> Node 0
SRAT: PXM 0 -> APIC 12 -> Node 0
SRAT: PXM 0 -> APIC 13 -> Node 0
SRAT: PXM 0 -> APIC 14 -> Node 0
SRAT: PXM 0 -> APIC 15 -> Node 0
SRAT: PXM 1 -> APIC 32 -> Node 1
SRAT: PXM 1 -> APIC 33 -> Node 1
SRAT: PXM 1 -> APIC 34 -> Node 1
SRAT: PXM 1 -> APIC 35 -> Node 1
SRAT: PXM 1 -> APIC 36 -> Node 1
SRAT: PXM 1 -> APIC 37 -> Node 1
SRAT: PXM 1 -> APIC 38 -> Node 1
SRAT: PXM 1 -> APIC 39 -> Node 1
SRAT: PXM 1 -> APIC 40 -> Node 1
SRAT: PXM 1 -> APIC 41 -> Node 1
SRAT: PXM 1 -> APIC 42 -> Node 1
SRAT: PXM 1 -> APIC 43 -> Node 1
SRAT: PXM 1 -> APIC 44 -> Node 1
SRAT: PXM 1 -> APIC 45 -> Node 1
SRAT: PXM 1 -> APIC 46 -> Node 1
SRAT: PXM 1 -> APIC 47 -> Node 1
SRAT: Node 0 PXM 0 0-1040000000
SRAT: Node 1 PXM 1 1040000000-2040000000
NUMA: Allocated memnodemap from 9000 - 9140
NUMA: Using 30 for the hash shift.
Bootmem setup node 0 0000000000000000-000000005dc00000
NODE_DATA [0000000000009140 - 000000000003d13f]
bootmap [000000000003e000 - 0000000000049b7f] pages c
(8 early reservations) ==> bootmem [0000000000 - 005dc00000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002029be4] TEXT DATA BSS ==> [0001000000 - 0002029be4]
#3 [0036d77000 - 0037fef2cf] RAMDISK ==> [0036d77000 - 0037fef2cf]
#4 [0000096c00 - 0000100000] BIOS reserved ==> [0000096c00 - 0000100000]
#5 [000202a000 - 000202a7dd] BRK ==> [000202a000 - 000202a7dd]
#6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
#7 [0000009000 - 0000009140] MEMNODEMAP ==> [0000009000 - 0000009140]
found SMP MP-table at [ffff8800000f4f80] f4f80
crashkernel=auto resulted in zero bytes of reserved memory.
[ffffea0000000000-ffffea00015fffff] PMD -> [ffff880002600000-ffff880003bfffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000001 -> 0x00000096
0: 0x00000100 -> 0x0005dc00
On node 0 totalpages: 383893
DMA zone: 56 pages used for memmap
DMA zone: 109 pages reserved
DMA zone: 3824 pages, LIFO batch:0
DMA32 zone: 5194 pages used for memmap
DMA32 zone: 374710 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x22] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x24] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x26] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x28] lapic_id[0x28] enabled)
ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x2a] enabled)
ACPI: LAPIC (acpi_id[0x2c] lapic_id[0x2c] enabled)
ACPI: LAPIC (acpi_id[0x2e] lapic_id[0x2e] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
ACPI: LAPIC (acpi_id[0x21] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x23] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x25] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x27] lapic_id[0x27] enabled)
ACPI: LAPIC (acpi_id[0x29] lapic_id[0x29] enabled)
ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x2b] enabled)
ACPI: LAPIC (acpi_id[0x2d] lapic_id[0x2d] enabled)
ACPI: LAPIC (acpi_id[0x2f] lapic_id[0x2f] enabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x00] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 0, version 32, address 0xfec10000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec40000] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 64 CPUs, 32 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 0000000000096000 - 0000000000097000
PM: Registered nosave memory: 0000000000097000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 5dc00000 (gap: 5dc00000:601cc000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:64 nr_cpu_ids:64 nr_node_ids:2
PERCPU: Embedded 30 pages/cpu @ffff880003c00000 s90968 r8192 d23720 u131072
pcpu-alloc: s90968 r8192 d23720 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
pcpu-alloc: [0] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
pcpu-alloc: [0] 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Built 1 zonelists in Node order, mobility grouping on. Total pages: 378534
Policy zone: DMA32
Kernel command line: ro root=/dev/mapper/vg_el6-lv_root rd_NO_LUKS rd_LVM_LV=vg_el6/lv_root rd_NO_MD SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rd_LVM_LV=vg_el6/lv_swap rd_NO_DM LANG=en_US.UTF-8 mem=1500M rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
dmar: Queued invalidation will be enabled to support x2apic and Intr-remapping.
Memory: 1469384k/1536000k available (5336k kernel code, 428k absent, 66188k reserved, 7016k data, 1288k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1736
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 6291456 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
TSC: cpu family 6 model 45, tsc initial value = 7444fb2e57
Fast TSC calibration using PIT
Detected 2600.055 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.11 BogoMIPS (lpj=2600055)
pid_max: default: 65536 minimum: 512
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 20 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21918 entries in 86 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbefe000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fbefe000 ver 1:0 cap d2078c106f0462 ecap f020fe
dmar: DRHD base: 0x000000f4ffe000 flags: 0x1
dmar: IOMMU 1: reg_base_addr f4ffe000 ver 1:0 cap d2078c106f0462 ecap f020fe
dmar: RMRR base: 0x000000bdffd000 end: 0x000000bdffffff
dmar: RMRR base: 0x000000bdff6000 end: 0x000000bdffcfff
dmar: RMRR base: 0x000000bdf83000 end: 0x000000bdf84fff
dmar: RMRR base: 0x000000bdf7f000 end: 0x000000bdf82fff
dmar: RMRR base: 0x000000bdf6f000 end: 0x000000bdf7efff
dmar: RMRR base: 0x000000000f4000 end: 0x000000000f4fff
dmar: RMRR base: 0x000000000e8000 end: 0x000000000e8fff
dmar: ATSR flags: 0x0
dmar: ATSR flags: 0x0
IOAPIC id 10 under DRHD base 0xfbefe000
IOAPIC id 8 under DRHD base 0xf4ffe000
IOAPIC id 0 under DRHD base 0xf4ffe000
HPET id 0 under DRHD base 0xf4ffe000
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
APIC routing finalized to physical flat.
alloc irq_desc for 72 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 73 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27 #28 #29 #30 #31
Brought up 32 CPUs
Total of 32 processors activated (166390.94 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2656 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base c0000000 segment 0 buses 0 - 255
PCI: MCFG area at c0000000 reserved in E820
PCI: Using MMCONFIG at c0000000 - cfffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-1f])
pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xf7ffffff]
pci_root PNP0A08:00: host bridge window [io 0x1000-0x7fff]
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0x0fff]
pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfed03fff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03bb]
pci_root PNP0A08:00: host bridge window [io 0x03c0-0x03df]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:00: root bus resource [io 0x1000-0x7fff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff]
pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed03fff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb]
pci_bus 0000:00: root bus resource [io 0x03c0-0x03df]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: PME# disabled
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: PME# disabled
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: PME# disabled
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:04.0: reg 10: [mem 0xf6cf0000-0xf6cf3fff 64bit]
pci 0000:00:04.1: reg 10: [mem 0xf6ce0000-0xf6ce3fff 64bit]
pci 0000:00:04.2: reg 10: [mem 0xf6cd0000-0xf6cd3fff 64bit]
pci 0000:00:04.3: reg 10: [mem 0xf6cc0000-0xf6cc3fff 64bit]
pci 0000:00:04.4: reg 10: [mem 0xf6cb0000-0xf6cb3fff 64bit]
pci 0000:00:04.5: reg 10: [mem 0xf6ca0000-0xf6ca3fff 64bit]
pci 0000:00:04.6: reg 10: [mem 0xf6c90000-0xf6c93fff 64bit]
pci 0000:00:04.7: reg 10: [mem 0xf6c80000-0xf6c83fff 64bit]
pci 0000:00:05.4: reg 10: [mem 0xf6c70000-0xf6c70fff]
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xf6c60000-0xf6c603ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xf6c50000-0xf6c503ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:01.0: PCI bridge to [bus 11-11]
pci 0000:00:01.1: PCI bridge to [bus 02-02]
pci 0000:04:00.0: reg 10: [mem 0xf7ff0000-0xf7ff3fff 64bit]
pci 0000:04:00.0: reg 18: [mem 0xf7fc0000-0xf7fdffff 64bit]
pci 0000:04:00.0: reg 20: [mem 0xf7fa0000-0xf7fbffff 64bit]
pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10: [mem 0xf7f90000-0xf7f93fff 64bit]
pci 0000:04:00.1: reg 18: [mem 0xf7f60000-0xf7f7ffff 64bit]
pci 0000:04:00.1: reg 20: [mem 0xf7f40000-0xf7f5ffff 64bit]
pci 0000:04:00.1: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:04:00.1: PME# supported from D3hot D3cold
pci 0000:04:00.1: PME# disabled
pci 0000:04:00.2: reg 10: [mem 0xf7f30000-0xf7f33fff 64bit]
pci 0000:04:00.2: reg 18: [mem 0xf7f00000-0xf7f1ffff 64bit]
pci 0000:04:00.2: reg 20: [mem 0xf7ee0000-0xf7efffff 64bit]
pci 0000:04:00.2: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:04:00.2: PME# supported from D3hot D3cold
pci 0000:04:00.2: PME# disabled
pci 0000:04:00.3: reg 10: [mem 0xf7ed0000-0xf7ed3fff 64bit]
pci 0000:04:00.3: reg 18: [mem 0xf7ea0000-0xf7ebffff 64bit]
pci 0000:04:00.3: reg 20: [mem 0xf7e80000-0xf7e9ffff 64bit]
pci 0000:04:00.3: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:04:00.3: PME# supported from D3hot D3cold
pci 0000:04:00.3: PME# disabled
pci 0000:04:00.4: reg 10: [mem 0xf7e70000-0xf7e73fff 64bit]
pci 0000:04:00.4: reg 18: [mem 0xf7e40000-0xf7e5ffff 64bit]
pci 0000:04:00.4: reg 20: [mem 0xf7e20000-0xf7e3ffff 64bit]
pci 0000:04:00.4: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:04:00.4: PME# supported from D3hot D3cold
pci 0000:04:00.4: PME# disabled
pci 0000:04:00.5: reg 10: [mem 0xf7e10000-0xf7e13fff 64bit]
pci 0000:04:00.5: reg 18: [mem 0xf7de0000-0xf7dfffff 64bit]
pci 0000:04:00.5: reg 20: [mem 0xf7dc0000-0xf7ddffff 64bit]
pci 0000:04:00.5: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:04:00.5: PME# supported from D3hot D3cold
pci 0000:04:00.5: PME# disabled
pci 0000:04:00.6: reg 10: [mem 0xf7db0000-0xf7db3fff 64bit]
pci 0000:04:00.6: reg 18: [mem 0xf7d80000-0xf7d9ffff 64bit]
pci 0000:04:00.6: reg 20: [mem 0xf7d60000-0xf7d7ffff 64bit]
pci 0000:04:00.6: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:04:00.6: PME# supported from D3hot D3cold
pci 0000:04:00.6: PME# disabled
pci 0000:04:00.7: reg 10: [mem 0xf7d50000-0xf7d53fff 64bit]
pci 0000:04:00.7: reg 18: [mem 0xf7d20000-0xf7d3ffff 64bit]
pci 0000:04:00.7: reg 20: [mem 0xf7d00000-0xf7d1ffff 64bit]
pci 0000:04:00.7: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:04:00.7: PME# supported from D3hot D3cold
pci 0000:04:00.7: PME# disabled
pci 0000:00:02.0: PCI bridge to [bus 04-04]
pci 0000:00:02.0: bridge window [mem 0xf7d00000-0xf7ffffff]
pci 0000:00:02.1: PCI bridge to [bus 12-12]
pci 0000:03:00.0: reg 10: [mem 0xf7c00000-0xf7cfffff 64bit]
pci 0000:03:00.0: reg 18: [mem 0xf7bf0000-0xf7bf03ff 64bit]
pci 0000:03:00.0: reg 20: [io 0x4000-0x40ff]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:02.2: PCI bridge to [bus 03-03]
pci 0000:00:02.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:02.2: bridge window [mem 0xf7b00000-0xf7cfffff]
pci 0000:00:02.3: PCI bridge to [bus 13-13]
pci 0000:00:03.0: PCI bridge to [bus 05-05]
pci 0000:00:03.1: PCI bridge to [bus 14-14]
pci 0000:00:03.2: PCI bridge to [bus 15-15]
pci 0000:00:03.3: PCI bridge to [bus 16-16]
pci 0000:00:11.0: PCI bridge to [bus 18-18]
pci 0000:00:1c.0: PCI bridge to [bus 08-08]
pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 14: [mem 0xf7af0000-0xf7af01ff]
pci 0000:01:00.0: reg 18: [io 0x3400-0x34ff]
pci 0000:01:00.1: reg 10: [mem 0xf5000000-0xf5ffffff pref]
pci 0000:01:00.1: reg 14: [mem 0xf7ae0000-0xf7ae3fff]
pci 0000:01:00.1: reg 18: [mem 0xf7000000-0xf77fffff]
pci 0000:01:00.2: reg 10: [io 0x3800-0x38ff]
pci 0000:01:00.2: reg 14: [mem 0xf6ff0000-0xf6ff00ff]
pci 0000:01:00.2: reg 18: [mem 0xf6e00000-0xf6efffff]
pci 0000:01:00.2: reg 1c: [mem 0xf6d80000-0xf6dfffff]
pci 0000:01:00.2: reg 20: [mem 0xf6d70000-0xf6d77fff]
pci 0000:01:00.2: reg 24: [mem 0xf6d60000-0xf6d67fff]
pci 0000:01:00.2: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:01:00.2: PME# disabled
pci 0000:01:00.4: reg 20: [io 0x3c00-0x3c1f]
pci 0000:00:1c.7: PCI bridge to [bus 01-01]
pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.7: bridge window [mem 0xf6d00000-0xf7afffff]
pci 0000:00:1c.7: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 17-17] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed03fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03bb] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03c0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.VRP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT1A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT1B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT2A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT2B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT2C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT2D._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT3A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT3B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT3C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT3D._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Firmware did not grant requested _OSC control
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 20-3f])
pci_root PNP0A08:01: host bridge window [mem 0xf8000000-0xfbffffff]
pci_root PNP0A08:01: host bridge window [io 0x8000-0xffff]
PCI host bridge to bus 0000:20
pci_bus 0000:20: root bus resource [mem 0xf8000000-0xfbffffff]
pci_bus 0000:20: root bus resource [io 0x8000-0xffff]
pci 0000:20:00.0: PME# supported from D0 D3hot D3cold
pci 0000:20:00.0: PME# disabled
pci 0000:20:01.0: PME# supported from D0 D3hot D3cold
pci 0000:20:01.0: PME# disabled
pci 0000:20:01.1: PME# supported from D0 D3hot D3cold
pci 0000:20:01.1: PME# disabled
pci 0000:20:02.0: PME# supported from D0 D3hot D3cold
pci 0000:20:02.0: PME# disabled
pci 0000:20:02.1: PME# supported from D0 D3hot D3cold
pci 0000:20:02.1: PME# disabled
pci 0000:20:02.2: PME# supported from D0 D3hot D3cold
pci 0000:20:02.2: PME# disabled
pci 0000:20:02.3: PME# supported from D0 D3hot D3cold
pci 0000:20:02.3: PME# disabled
pci 0000:20:03.0: PME# supported from D0 D3hot D3cold
pci 0000:20:03.0: PME# disabled
pci 0000:20:03.1: PME# supported from D0 D3hot D3cold
pci 0000:20:03.1: PME# disabled
pci 0000:20:03.2: PME# supported from D0 D3hot D3cold
pci 0000:20:03.2: PME# disabled
pci 0000:20:03.3: PME# supported from D0 D3hot D3cold
pci 0000:20:03.3: PME# disabled
pci 0000:20:04.0: reg 10: [mem 0xfbff0000-0xfbff3fff 64bit]
pci 0000:20:04.1: reg 10: [mem 0xfbfe0000-0xfbfe3fff 64bit]
pci 0000:20:04.2: reg 10: [mem 0xfbfd0000-0xfbfd3fff 64bit]
pci 0000:20:04.3: reg 10: [mem 0xfbfc0000-0xfbfc3fff 64bit]
pci 0000:20:04.4: reg 10: [mem 0xfbfb0000-0xfbfb3fff 64bit]
pci 0000:20:04.5: reg 10: [mem 0xfbfa0000-0xfbfa3fff 64bit]
pci 0000:20:04.6: reg 10: [mem 0xfbf90000-0xfbf93fff 64bit]
pci 0000:20:04.7: reg 10: [mem 0xfbf80000-0xfbf83fff 64bit]
pci 0000:20:05.4: reg 10: [mem 0xfbf70000-0xfbf70fff]
pci 0000:20:00.0: PCI bridge to [bus 2d-2d]
pci 0000:20:01.0: PCI bridge to [bus 24-24]
pci 0000:20:01.1: PCI bridge to [bus 25-25]
pci 0000:20:02.0: PCI bridge to [bus 26-26]
pci 0000:20:02.1: PCI bridge to [bus 27-27]
pci 0000:20:02.2: PCI bridge to [bus 28-28]
pci 0000:20:02.3: PCI bridge to [bus 29-29]
pci 0000:20:03.0: PCI bridge to [bus 21-21]
pci 0000:20:03.1: PCI bridge to [bus 2a-2a]
pci 0000:20:03.2: PCI bridge to [bus 2b-2b]
pci 0000:20:03.3: PCI bridge to [bus 2c-2c]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PT1A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PT1B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PT2A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PT2B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PT2C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PT2D._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PT3A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PT3B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PT3C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PT3D._PRT]
pci0000:20: Requesting ACPI _OSC control (0x1d)
Firmware did not grant requested _OSC control
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled.
vgaarb: device added: PCI:0000:01:00.1,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.1
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 74 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 75 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 76 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 77 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 78 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 74, 75, 76, 77, 78, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 74 for MSI
hpet: hpet3 irq 75 for MSI
hpet: hpet4 irq 76 for MSI
hpet: hpet5 irq 77 for MSI
hpet: hpet6 irq 78 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xf4ffe000-0xf4ffffff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0070-0x0077]
pnp 00:02: [io 0x0408-0x040f]
pnp 00:02: [io 0x04d0-0x04d1]
pnp 00:02: [io 0x0020-0x003f]
pnp 00:02: [io 0x00a0-0x00bf]
pnp 00:02: [io 0x0090-0x009f]
pnp 00:02: [io 0x0050-0x0053]
pnp 00:02: [io 0x0310-0x0315]
pnp 00:02: [io 0x0316-0x0317]
pnp 00:02: [io 0x0700-0x071f]
pnp 00:02: [io 0x0880-0x08ff]
pnp 00:02: [io 0x0900-0x097f]
pnp 00:02: [io 0x0010-0x001f]
pnp 00:02: [io 0x0cd4-0x0cd7]
pnp 00:02: [io 0x0cd0-0x0cd3]
pnp 00:02: [io 0x0f50-0x0f58]
pnp 00:02: [io 0x00f0]
pnp 00:02: [io 0x0ca0-0x0ca1]
pnp 00:02: [io 0x0ca4-0x0ca5]
pnp 00:02: [mem 0xc0000000-0xcfffffff]
pnp 00:02: [mem 0xfe000000-0xfebfffff]
pnp 00:02: [mem 0xfc000000-0xfc000fff]
pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
pnp 00:02: [mem 0xfed30000-0xfed3ffff]
pnp 00:02: [mem 0xfee00000-0xfee00fff]
pnp 00:02: [mem 0xff800000-0xffffffff]
pnp 00:02: [io 0x03f8-0x03ff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io 0x0ca2-0x0ca3]
pnp 00:03: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [dma 7]
pnp 00:05: [io 0x0000-0x000f]
pnp 00:05: [io 0x0080-0x008f]
pnp 00:05: [io 0x00c0-0x00df]
pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x002e-0x002f]
pnp 00:07: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:08: [irq 3]
pnp 00:08: [io 0x02f8-0x02ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:09: [io 0x0070-0x0071]
pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:0a: [io 0x0060]
pnp 00:0a: [io 0x0064]
pnp 00:0a: [irq 1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:0b: [irq 12]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:0d: [mem 0xfbefe000-0xfbefffff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xf4ffe000-0xf4ffffff] could not be reserved
system 00:02: [io 0x0408-0x040f] has been reserved
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0310-0x0315] has been reserved
system 00:02: [io 0x0316-0x0317] has been reserved
system 00:02: [io 0x0700-0x071f] has been reserved
system 00:02: [io 0x0880-0x08ff] has been reserved
system 00:02: [io 0x0900-0x097f] has been reserved
system 00:02: [io 0x0cd4-0x0cd7] has been reserved
system 00:02: [io 0x0cd0-0x0cd3] has been reserved
system 00:02: [io 0x0f50-0x0f58] has been reserved
system 00:02: [io 0x0ca0-0x0ca1] has been reserved
system 00:02: [io 0x0ca4-0x0ca5] has been reserved
system 00:02: [io 0x03f8-0x03ff] has been reserved
system 00:02: [mem 0xc0000000-0xcfffffff] has been reserved
system 00:02: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:02: [mem 0xfc000000-0xfc000fff] has been reserved
system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:02: [mem 0xfed30000-0xfed3ffff] has been reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: [mem 0xff800000-0xffffffff] has been reserved
system 00:0d: [mem 0xfbefe000-0xfbefffff] could not be reserved
pci 0000:00:02.0: BAR 15: assigned [mem 0xf4000000-0xf41fffff pref]
pci 0000:00:02.2: BAR 15: assigned [mem 0xf4200000-0xf42fffff pref]
pci 0000:00:01.0: PCI bridge to [bus 11-11]
pci 0000:00:01.1: PCI bridge to [bus 02-02]
pci 0000:04:00.0: BAR 6: assigned [mem 0xf4000000-0xf403ffff pref]
pci 0000:04:00.1: BAR 6: assigned [mem 0xf4040000-0xf407ffff pref]
pci 0000:04:00.2: BAR 6: assigned [mem 0xf4080000-0xf40bffff pref]
pci 0000:04:00.3: BAR 6: assigned [mem 0xf40c0000-0xf40fffff pref]
pci 0000:04:00.4: BAR 6: assigned [mem 0xf4100000-0xf413ffff pref]
pci 0000:04:00.5: BAR 6: assigned [mem 0xf4140000-0xf417ffff pref]
pci 0000:04:00.6: BAR 6: assigned [mem 0xf4180000-0xf41bffff pref]
pci 0000:04:00.7: BAR 6: assigned [mem 0xf41c0000-0xf41fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 04-04]
pci 0000:00:02.0: bridge window [mem 0xf7d00000-0xf7ffffff]
pci 0000:00:02.0: bridge window [mem 0xf4000000-0xf41fffff pref]
pci 0000:00:02.1: PCI bridge to [bus 12-12]
pci 0000:03:00.0: BAR 6: assigned [mem 0xf4200000-0xf427ffff pref]
pci 0000:00:02.2: PCI bridge to [bus 03-03]
pci 0000:00:02.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:02.2: bridge window [mem 0xf7b00000-0xf7cfffff]
pci 0000:00:02.2: bridge window [mem 0xf4200000-0xf42fffff pref]
pci 0000:00:02.3: PCI bridge to [bus 13-13]
pci 0000:00:03.0: PCI bridge to [bus 05-05]
pci 0000:00:03.1: PCI bridge to [bus 14-14]
pci 0000:00:03.2: PCI bridge to [bus 15-15]
pci 0000:00:03.3: PCI bridge to [bus 16-16]
pci 0000:00:11.0: PCI bridge to [bus 18-18]
pci 0000:00:1c.0: PCI bridge to [bus 08-08]
pci 0000:01:00.2: BAR 6: assigned [mem 0xf6d00000-0xf6d0ffff pref]
pci 0000:00:1c.7: PCI bridge to [bus 01-01]
pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.7: bridge window [mem 0xf6d00000-0xf7afffff]
pci 0000:00:1c.7: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 17-17]
pci 0000:20:00.0: PCI bridge to [bus 2d-2d]
pci 0000:20:01.0: PCI bridge to [bus 24-24]
pci 0000:20:01.1: PCI bridge to [bus 25-25]
pci 0000:20:02.0: PCI bridge to [bus 26-26]
pci 0000:20:02.1: PCI bridge to [bus 27-27]
pci 0000:20:02.2: PCI bridge to [bus 28-28]
pci 0000:20:02.3: PCI bridge to [bus 29-29]
pci 0000:20:03.0: PCI bridge to [bus 21-21]
pci 0000:20:03.1: PCI bridge to [bus 2a-2a]
pci 0000:20:03.2: PCI bridge to [bus 2b-2b]
pci 0000:20:03.3: PCI bridge to [bus 2c-2c]
alloc irq_desc for 45 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:01.0: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:01.1: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:01.1: setting latency timer to 64
pci 0000:00:02.0: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.1: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:02.1: setting latency timer to 64
pci 0000:00:02.2: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:02.2: setting latency timer to 64
pci 0000:00:02.3: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:02.3: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:03.1: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:03.1: setting latency timer to 64
pci 0000:00:03.2: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:03.2: setting latency timer to 64
pci 0000:00:03.3: PCI INT A -> GSI 45 (level, low) -> IRQ 45
pci 0000:00:03.3: setting latency timer to 64
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:11.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:11.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
alloc irq_desc for 69 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:20:00.0: PCI INT A -> GSI 69 (level, low) -> IRQ 69
pci 0000:20:00.0: setting latency timer to 64
pci 0000:20:01.0: PCI INT A -> GSI 69 (level, low) -> IRQ 69
pci 0000:20:01.0: setting latency timer to 64
pci 0000:20:01.1: PCI INT A -> GSI 69 (level, low) -> IRQ 69
pci 0000:20:01.1: setting latency timer to 64
pci 0000:20:02.0: PCI INT A -> GSI 69 (level, low) -> IRQ 69
pci 0000:20:02.0: setting latency timer to 64
pci 0000:20:02.1: PCI INT A -> GSI 69 (level, low) -> IRQ 69
pci 0000:20:02.1: setting latency timer to 64
pci 0000:20:02.2: PCI INT A -> GSI 69 (level, low) -> IRQ 69
pci 0000:20:02.2: setting latency timer to 64
pci 0000:20:02.3: PCI INT A -> GSI 69 (level, low) -> IRQ 69
pci 0000:20:02.3: setting latency timer to 64
pci 0000:20:03.0: PCI INT A -> GSI 69 (level, low) -> IRQ 69
pci 0000:20:03.0: setting latency timer to 64
pci 0000:20:03.1: PCI INT A -> GSI 69 (level, low) -> IRQ 69
pci 0000:20:03.1: setting latency timer to 64
pci 0000:20:03.2: PCI INT A -> GSI 69 (level, low) -> IRQ 69
pci 0000:20:03.2: setting latency timer to 64
pci 0000:20:03.3: PCI INT A -> GSI 69 (level, low) -> IRQ 69
pci 0000:20:03.3: setting latency timer to 64
pci_bus 0000:00: resource 4 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:00: resource 5 [io 0x1000-0x7fff]
pci_bus 0000:00: resource 6 [io 0x0000-0x03af]
pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff]
pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed03fff]
pci_bus 0000:00: resource 10 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 11 [io 0x03b0-0x03bb]
pci_bus 0000:00: resource 12 [io 0x03c0-0x03df]
pci_bus 0000:00: resource 13 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 1 [mem 0xf7d00000-0xf7ffffff]
pci_bus 0000:04: resource 2 [mem 0xf4000000-0xf41fffff pref]
pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:03: resource 1 [mem 0xf7b00000-0xf7cfffff]
pci_bus 0000:03: resource 2 [mem 0xf4200000-0xf42fffff pref]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xf6d00000-0xf7afffff]
pci_bus 0000:01: resource 2 [mem 0xf5000000-0xf5ffffff 64bit pref]
pci_bus 0000:17: resource 4 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:17: resource 5 [io 0x1000-0x7fff]
pci_bus 0000:17: resource 6 [io 0x0000-0x03af]
pci_bus 0000:17: resource 7 [io 0x03e0-0x0cf7]
pci_bus 0000:17: resource 8 [io 0x0d00-0x0fff]
pci_bus 0000:17: resource 9 [mem 0xfed00000-0xfed03fff]
pci_bus 0000:17: resource 10 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:17: resource 11 [io 0x03b0-0x03bb]
pci_bus 0000:17: resource 12 [io 0x03c0-0x03df]
pci_bus 0000:17: resource 13 [mem 0x000a0000-0x000bffff]
pci_bus 0000:20: resource 4 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:20: resource 5 [io 0x8000-0xffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
alloc irq_desc for 21 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1a.0: PCI INT A disabled
alloc irq_desc for 20 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:01:00.1: Boot video device
pci 0000:01:00.4: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.4: PCI INT B disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18912k freed
dmar: Device scope device [0000:00:00.00] not found
dmar: Device scope device [0000:00:1f.02] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:00.00] not found
dmar: Device scope device [0000:00:1f.02] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:00.00] not found
dmar: Device scope device [0000:00:1f.02] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:00.00] not found
dmar: Device scope device [0000:00:1f.02] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:00.00] not found
dmar: Device scope device [0000:00:1f.02] not found
dmar: Device scope device [0000:00:1f.05] not found
futex hash table entries: 16384 (order: 8, 1048576 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1424431480.686:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 2906
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 99BA280A469ED0C1
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
[Firmware Bug]: No valid trip found
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
ERST: Failed to get Error Log Address Range.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 21, io mem 0xf6c60000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-504.8.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 20, io mem 0xf6c50000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-504.8.1.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:01:00.4: PCI INT B -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:01:00.4: setting latency timer to 64
uhci_hcd 0000:01:00.4: UHCI Host Controller
uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:00.4: irq 16, io base 0x00003c00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-504.8.1.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:01:00.4
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:09: RTC can wake from S4
rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:09: setting system clock to 2015-02-20 11:24:42 UTC (1424431482)
Initalizing network drop monitor service
Freeing unused kernel memory: 1288k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 788k freed
Freeing unused kernel memory: 1568k freed
dracut: dracut-004-356.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
usb 1-1: new high speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
Refined TSC clocksource calibration: 2599.999 MHz.
Switching to clocksource tsc
usb 2-1: new high speed USB device number 2 using ehci_hcd
STARTING CRC_T10DIF
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
Emulex LightPulse Fibre Channel SCSI driver 10.2.8020.1
Copyright(c) 2004-2014 Emulex. All rights reserved.
alloc irq_desc for 37 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
lpfc 0000:04:00.2: PCI INT C -> GSI 37 (level, low) -> IRQ 37
lpfc 0000:04:00.2: setting latency timer to 64
scsi0 : Emulex OneConnect OCe11100, FCoE Initiator on PCI bus 04 device 02 irq 37
alloc irq_desc for 79 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
lpfc 0000:04:00.2: irq 79 for MSI/MSI-X
alloc irq_desc for 80 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
lpfc 0000:04:00.2: irq 80 for MSI/MSI-X
alloc irq_desc for 81 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
lpfc 0000:04:00.2: irq 81 for MSI/MSI-X
alloc irq_desc for 82 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
lpfc 0000:04:00.2: irq 82 for MSI/MSI-X
usb 2-1.3: new high speed USB device number 3 using ehci_hcd
usb 2-1.3: New USB device found, idVendor=0424, idProduct=2660
usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1.3: configuration #1 chosen from 1 choice
hub 2-1.3:1.0: USB hub found
hub 2-1.3:1.0: 2 ports detected
lpfc 0000:04:00.2: 0:1303 Link Up Event x1 received Data: x1 x0 x40 x0 x0 x0 0
alloc irq_desc for 38 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
lpfc 0000:04:00.3: PCI INT D -> GSI 38 (level, low) -> IRQ 38
lpfc 0000:04:00.3: setting latency timer to 64
scsi1 : Emulex OneConnect OCe11100, FCoE Initiator on PCI bus 04 device 03 irq 38
alloc irq_desc for 83 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
lpfc 0000:04:00.3: irq 83 for MSI/MSI-X
alloc irq_desc for 84 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
lpfc 0000:04:00.3: irq 84 for MSI/MSI-X
alloc irq_desc for 85 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
lpfc 0000:04:00.3: irq 85 for MSI/MSI-X
alloc irq_desc for 86 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
lpfc 0000:04:00.3: irq 86 for MSI/MSI-X
scsi 0:0:0:0: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
scsi 0:0:0:1: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
scsi 0:0:0:2: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
scsi 0:0:0:3: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
scsi 0:0:0:4: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
scsi 0:0:0:5: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
scsi 0:0:0:254: Enclosure 3PARdata SES 3210 PQ: 0 ANSI: 6
scsi 0:0:1:0: RAID HP HSV400 0005 PQ: 0 ANSI: 5
scsi 0:0:1:1: Direct-Access HP HSV400 0005 PQ: 0 ANSI: 5
scsi 0:0:2:0: RAID HP HSV400 0005 PQ: 0 ANSI: 5
scsi 0:0:2:1: Direct-Access HP HSV400 0005 PQ: 0 ANSI: 5
scsi 0:0:3:0: RAID HP HSV400 0005 PQ: 0 ANSI: 5
scsi 0:0:3:1: Direct-Access HP HSV400 0005 PQ: 0 ANSI: 5
lpfc 0000:04:00.3: 1:1303 Link Up Event x1 received Data: x1 x0 x40 x0 x0 x0 0
HP HPSA Driver (v 3.4.4-1-RH2)
alloc irq_desc for 34 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
hpsa 0000:03:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
hpsa 0000:03:00.0: setting latency timer to 64
hpsa 0000:03:00.0: MSIX
alloc irq_desc for 87 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
hpsa 0000:03:00.0: irq 87 for MSI/MSI-X
alloc irq_desc for 88 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
hpsa 0000:03:00.0: irq 88 for MSI/MSI-X
alloc irq_desc for 89 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
hpsa 0000:03:00.0: irq 89 for MSI/MSI-X
alloc irq_desc for 90 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
hpsa 0000:03:00.0: irq 90 for MSI/MSI-X
alloc irq_desc for 91 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
hpsa 0000:03:00.0: irq 91 for MSI/MSI-X
alloc irq_desc for 92 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
hpsa 0000:03:00.0: irq 92 for MSI/MSI-X
alloc irq_desc for 93 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
hpsa 0000:03:00.0: irq 93 for MSI/MSI-X
alloc irq_desc for 94 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
hpsa 0000:03:00.0: irq 94 for MSI/MSI-X
hpsa 0000:03:00.0: Logical aborts not supported
hpsa 0000:03:00.0: hpsa0: at IRQ 87 using DAC
scsi2 : hpsa
hpsa 0000:03:00.0: RAID device c2b3t0l0 added.
hpsa 0000:03:00.0: Direct-Access device c2b0t0l0 added.
scsi 2:3:0:0: RAID HP P220i 3.54 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access HP LOGICAL VOLUME 3.54 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sd 0:0:0:1: [sdb] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sd 0:0:0:2: [sdc] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sd 0:0:0:3: [sdd] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sd 0:0:0:4: [sde] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sd 0:0:0:5: [sdf] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sd 2:0:0:0: [sdj] 390651840 512-byte logical blocks: (200 GB/186 GiB)
sd 2:0:0:0: [sdj] 4096-byte physical blocks
sd 0:0:2:1: [sdh] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sd 2:0:0:0: [sdj] Write Protect is off
sd 2:0:0:0: [sdj] Mode Sense: 73 00 00 08
sd 2:0:0:0: [sdj] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:1: [sdg] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sd 0:0:3:1: [sdi] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 8b 00 10 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:2:1: [sdh] Write Protect is off
sd 0:0:2:1: [sdh] Mode Sense: 83 00 10 08
sd 0:0:0:2: [sdc] Write Protect is off
sd 0:0:0:2: [sdc] Mode Sense: 8b 00 10 08
sd 0:0:0:4: [sde] Write Protect is off
sd 0:0:0:4: [sde] Mode Sense: 8b 00 10 08
sd 0:0:0:1: [sdb] Write Protect is off
sd 0:0:0:1: [sdb] Mode Sense: 8b 00 10 08
sd 0:0:0:3: [sdd] Write Protect is off
sd 0:0:0:3: [sdd] Mode Sense: 8b 00 10 08
sd 0:0:0:4: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:2: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:5: [sdf] Write Protect is off
sd 0:0:0:5: [sdf] Mode Sense: 8b 00 10 08
sd 0:0:0:1: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
sdj: sdj1 sdj2
sd 0:0:0:3: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:5: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 2:0:0:0: [sdj] Attached SCSI disk
sd 0:0:1:1: [sdg] Write Protect is off
sd 0:0:1:1: [sdg] Mode Sense: 83 00 10 08
sd 0:0:2:1: [sdh] Write cache: disabled, read cache: enabled, supports DPO and FUA
sda:
sd 0:0:1:1: [sdg] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:3:1: [sdi] Write Protect is off
sd 0:0:3:1: [sdi] Mode Sense: 83 00 10 08
sdb:
sdc:
sde:
sd 0:0:3:1: [sdi] Write cache: disabled, read cache: enabled, supports DPO and FUA
sdd:
sdf:
sdh:
sdg: sdb1
sdc1
sde1
sda1
sdd1
sd 0:0:0:1: [sdb] Attached SCSI disk
sdi: sdf1
sd 0:0:0:2: [sdc] Attached SCSI disk
sd 0:0:0:4: [sde] Attached SCSI disk
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:3: [sdd] Attached SCSI disk
sd 0:0:0:5: [sdf] Attached SCSI disk
sdg1
sdi1
sdh1
sd 0:0:1:1: [sdg] Attached SCSI disk
sd 0:0:3:1: [sdi] Attached SCSI disk
sd 0:0:2:1: [sdh] Attached SCSI disk
scsi 1:0:0:0: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
sd 1:0:0:0: [sdk] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sd 1:0:0:0: [sdk] Write Protect is off
sd 1:0:0:0: [sdk] Mode Sense: 8b 00 10 08
sd 1:0:0:0: [sdk] Write cache: disabled, read cache: enabled, supports DPO and FUA
scsi 1:0:0:1: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
sd 1:0:0:1: [sdl] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sdk:
sd 1:0:0:1: [sdl] Write Protect is off
sd 1:0:0:1: [sdl] Mode Sense: 8b 00 10 08
sd 1:0:0:1: [sdl] Write cache: disabled, read cache: enabled, supports DPO and FUA
scsi 1:0:0:2: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
sd 1:0:0:2: [sdm] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sdk1
sdl:
sd 1:0:0:2: [sdm] Write Protect is off
sd 1:0:0:2: [sdm] Mode Sense: 8b 00 10 08
sd 1:0:0:2: [sdm] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 1:0:0:0: [sdk] Attached SCSI disk
scsi 1:0:0:3: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
sd 1:0:0:3: [sdn] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sdl1
sd 1:0:0:3: [sdn] Write Protect is off
sd 1:0:0:3: [sdn] Mode Sense: 8b 00 10 08
sdm:
sd 1:0:0:3: [sdn] Write cache: disabled, read cache: enabled, supports DPO and FUA
scsi 1:0:0:4: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
sd 1:0:0:4: [sdo] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sd 1:0:0:1: [sdl] Attached SCSI disk
sdm1
sdn:
sd 1:0:0:4: [sdo] Write Protect is off
sd 1:0:0:4: [sdo] Mode Sense: 8b 00 10 08
sd 1:0:0:4: [sdo] Write cache: disabled, read cache: enabled, supports DPO and FUA
scsi 1:0:0:5: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
sd 1:0:0:5: [sdp] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sdn1
sdo:
sd 1:0:0:5: [sdp] Write Protect is off
sd 1:0:0:5: [sdp] Mode Sense: 8b 00 10 08
sd 1:0:0:2: [sdm] Attached SCSI disk
scsi 1:0:0:254: Enclosure 3PARdata SES 3210 PQ: 0 ANSI: 6
sd 1:0:0:5: [sdp] Write cache: disabled, read cache: enabled, supports DPO and FUA
sdo1
sd 1:0:0:3: [sdn] Attached SCSI disk
sdp:
scsi 1:0:1:0: RAID HP HSV400 0005 PQ: 0 ANSI: 5
sd 1:0:0:4: [sdo] Attached SCSI disk
sdp1
scsi 1:0:1:1: Direct-Access HP HSV400 0005 PQ: 0 ANSI: 5
sd 1:0:1:1: [sdq] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sd 1:0:1:1: [sdq] Write Protect is off
sd 1:0:1:1: [sdq] Mode Sense: 83 00 10 08
sd 1:0:1:1: [sdq] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 1:0:0:5: [sdp] Attached SCSI disk
sdq:
scsi 1:0:2:0: RAID HP HSV400 0005 PQ: 0 ANSI: 5
sdq1
scsi 1:0:2:1: Direct-Access HP HSV400 0005 PQ: 0 ANSI: 5
sd 1:0:2:1: [sdr] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sd 1:0:2:1: [sdr] Write Protect is off
sd 1:0:2:1: [sdr] Mode Sense: 83 00 10 08
sd 1:0:2:1: [sdr] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 1:0:1:1: [sdq] Attached SCSI disk
sdr:
scsi 1:0:3:0: RAID HP HSV400 0005 PQ: 0 ANSI: 5
sdr1
sd 1:0:2:1: [sdr] Attached SCSI disk
scsi 1:0:3:1: Direct-Access HP HSV400 0005 PQ: 0 ANSI: 5
sd 1:0:3:1: [sds] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sd 1:0:3:1: [sds] Write Protect is off
sd 1:0:3:1: [sds] Mode Sense: 83 00 10 08
sd 1:0:3:1: [sds] Write cache: disabled, read cache: enabled, supports DPO and FUA
sds: sds1
sd 1:0:3:1: [sds] Attached SCSI disk
dracut: Scanning devices sdj2 for LVM logical volumes vg_el6/lv_root vg_el6/lv_swap
dracut: inactive '/dev/vg_el6/lv_root' [120.00 GiB] inherit
dracut: inactive '/dev/vg_el6/lv_swap' [4.00 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_el6-lv_root
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1424431485.453:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
dca service started, version 1.12.1
ioatdma: Intel(R) QuickData Technology Driver 4.00
ioatdma 0000:00:04.0: can't derive routing for PCI INT A
ioatdma 0000:00:04.0: PCI INT A: no GSI - using IRQ 5
ioatdma 0000:00:04.0: setting latency timer to 64
alloc irq_desc for 95 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.0: irq 95 for MSI/MSI-X
ioatdma 0000:00:04.1: can't derive routing for PCI INT B
ioatdma 0000:00:04.1: PCI INT B: no GSI - using IRQ 7
ioatdma 0000:00:04.1: setting latency timer to 64
alloc irq_desc for 96 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.1: irq 96 for MSI/MSI-X
ioatdma 0000:00:04.2: can't derive routing for PCI INT C
ioatdma 0000:00:04.2: PCI INT C: no GSI - using IRQ 10
ioatdma 0000:00:04.2: setting latency timer to 64
alloc irq_desc for 97 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.2: irq 97 for MSI/MSI-X
ioatdma 0000:00:04.3: can't derive routing for PCI INT D
ioatdma 0000:00:04.3: PCI INT D: no GSI - using IRQ 10
ioatdma 0000:00:04.3: setting latency timer to 64
alloc irq_desc for 98 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.3: irq 98 for MSI/MSI-X
ioatdma 0000:00:04.4: can't derive routing for PCI INT A
ioatdma 0000:00:04.4: PCI INT A: no GSI - using IRQ 5
ioatdma 0000:00:04.4: setting latency timer to 64
alloc irq_desc for 99 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.4: irq 99 for MSI/MSI-X
ioatdma 0000:00:04.5: can't derive routing for PCI INT B
ioatdma 0000:00:04.5: PCI INT B: no GSI - using IRQ 7
ioatdma 0000:00:04.5: setting latency timer to 64
alloc irq_desc for 100 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.5: irq 100 for MSI/MSI-X
ioatdma 0000:00:04.6: can't derive routing for PCI INT C
ioatdma 0000:00:04.6: PCI INT C: no GSI - using IRQ 10
ioatdma 0000:00:04.6: setting latency timer to 64
alloc irq_desc for 101 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.6: irq 101 for MSI/MSI-X
ioatdma 0000:00:04.7: can't derive routing for PCI INT D
ioatdma 0000:00:04.7: PCI INT D: no GSI - using IRQ 10
ioatdma 0000:00:04.7: setting latency timer to 64
alloc irq_desc for 102 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ioatdma 0000:00:04.7: irq 102 for MSI/MSI-X
ioatdma 0000:20:04.0: can't derive routing for PCI INT A
ioatdma 0000:20:04.0: PCI INT A: no GSI - using IRQ 5
ioatdma 0000:20:04.0: setting latency timer to 64
alloc irq_desc for 103 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:20:04.0: irq 103 for MSI/MSI-X
ioatdma 0000:20:04.1: can't derive routing for PCI INT B
ioatdma 0000:20:04.1: PCI INT B: no GSI - using IRQ 7
ioatdma 0000:20:04.1: setting latency timer to 64
alloc irq_desc for 104 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:20:04.1: irq 104 for MSI/MSI-X
ioatdma 0000:20:04.2: can't derive routing for PCI INT C
ioatdma 0000:20:04.2: PCI INT C: no GSI - using IRQ 10
ioatdma 0000:20:04.2: setting latency timer to 64
alloc irq_desc for 105 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:20:04.2: irq 105 for MSI/MSI-X
ioatdma 0000:20:04.3: can't derive routing for PCI INT D
ioatdma 0000:20:04.3: PCI INT D: no GSI - using IRQ 10
ioatdma 0000:20:04.3: setting latency timer to 64
alloc irq_desc for 106 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:20:04.3: irq 106 for MSI/MSI-X
ioatdma 0000:20:04.4: can't derive routing for PCI INT A
ioatdma 0000:20:04.4: PCI INT A: no GSI - using IRQ 5
ioatdma 0000:20:04.4: setting latency timer to 64
alloc irq_desc for 107 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:20:04.4: irq 107 for MSI/MSI-X
ioatdma 0000:20:04.5: can't derive routing for PCI INT B
ioatdma 0000:20:04.5: PCI INT B: no GSI - using IRQ 7
ioatdma 0000:20:04.5: setting latency timer to 64
alloc irq_desc for 108 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:20:04.5: irq 108 for MSI/MSI-X
ioatdma 0000:20:04.6: can't derive routing for PCI INT C
ioatdma 0000:20:04.6: PCI INT C: no GSI - using IRQ 10
ioatdma 0000:20:04.6: setting latency timer to 64
alloc irq_desc for 109 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:20:04.6: irq 109 for MSI/MSI-X
ioatdma 0000:20:04.7: can't derive routing for PCI INT D
ioatdma 0000:20:04.7: PCI INT D: no GSI - using IRQ 10
ioatdma 0000:20:04.7: setting latency timer to 64
alloc irq_desc for 110 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:20:04.7: irq 110 for MSI/MSI-X
alloc irq_desc for 32 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:04:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
be2net 0000:04:00.0: setting latency timer to 64
be2net 0000:04:00.0: PCIe error reporting enabled
be2net 0000:04:00.0: adapter not in advanced mode
alloc irq_desc for 111 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:04:00.0: irq 111 for MSI/MSI-X
alloc irq_desc for 112 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:04:00.0: irq 112 for MSI/MSI-X
alloc irq_desc for 113 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:04:00.0: irq 113 for MSI/MSI-X
alloc irq_desc for 114 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:04:00.0: irq 114 for MSI/MSI-X
be2net 0000:04:00.0: enabled 4 MSI-x vector(s) for NIC
be2net 0000:04:00.0: created 4 TX queue(s)
be2net 0000:04:00.0: created 4 RSS queue(s) and 1 default RX queue
be2net 0000:04:00.0: Emulex OneConnect(be3): PF FLEX10 port 0
alloc irq_desc for 36 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:04:00.1: PCI INT B -> GSI 36 (level, low) -> IRQ 36
be2net 0000:04:00.1: setting latency timer to 64
be2net 0000:04:00.1: PCIe error reporting enabled
be2net 0000:04:00.1: adapter not in advanced mode
alloc irq_desc for 115 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:04:00.1: irq 115 for MSI/MSI-X
alloc irq_desc for 116 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:04:00.1: irq 116 for MSI/MSI-X
alloc irq_desc for 117 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:04:00.1: irq 117 for MSI/MSI-X
alloc irq_desc for 118 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:04:00.1: irq 118 for MSI/MSI-X
be2net 0000:04:00.1: enabled 4 MSI-x vector(s) for NIC
be2net 0000:04:00.1: created 4 TX queue(s)
be2net 0000:04:00.1: created 4 RSS queue(s) and 1 default RX queue
be2net 0000:04:00.1: Emulex OneConnect(be3): PF FLEX10 port 1
be2net 0000:04:00.4: PCI INT A -> GSI 32 (level, low) -> IRQ 32
be2net 0000:04:00.4: setting latency timer to 64
be2net 0000:04:00.4: PCIe error reporting enabled
be2net 0000:04:00.4: adapter not in advanced mode
alloc irq_desc for 119 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:04:00.4: irq 119 for MSI/MSI-X
be2net 0000:04:00.4: enabled 1 MSI-x vector(s) for NIC
be2net 0000:04:00.4: created 1 TX queue(s)
be2net 0000:04:00.4: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:04:00.4: Emulex OneConnect(be3): PF FLEX10 port 0
be2net 0000:04:00.5: PCI INT B -> GSI 36 (level, low) -> IRQ 36
be2net 0000:04:00.5: setting latency timer to 64
be2net 0000:04:00.5: PCIe error reporting enabled
be2net 0000:04:00.5: adapter not in advanced mode
alloc irq_desc for 120 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:04:00.5: irq 120 for MSI/MSI-X
be2net 0000:04:00.5: enabled 1 MSI-x vector(s) for NIC
be2net 0000:04:00.5: created 1 TX queue(s)
be2net 0000:04:00.5: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:04:00.5: Emulex OneConnect(be3): PF FLEX10 port 1
be2net 0000:04:00.6: PCI INT C -> GSI 37 (level, low) -> IRQ 37
be2net 0000:04:00.6: setting latency timer to 64
be2net 0000:04:00.6: PCIe error reporting enabled
be2net 0000:04:00.6: adapter not in advanced mode
alloc irq_desc for 121 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:04:00.6: irq 121 for MSI/MSI-X
be2net 0000:04:00.6: enabled 1 MSI-x vector(s) for NIC
be2net 0000:04:00.6: created 1 TX queue(s)
be2net 0000:04:00.6: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:04:00.6: Emulex OneConnect(be3): PF FLEX10 port 0
be2net 0000:04:00.7: PCI INT D -> GSI 38 (level, low) -> IRQ 38
be2net 0000:04:00.7: setting latency timer to 64
be2net 0000:04:00.7: PCIe error reporting enabled
be2net 0000:04:00.7: adapter not in advanced mode
alloc irq_desc for 122 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
be2net 0000:04:00.7: irq 122 for MSI/MSI-X
be2net 0000:04:00.7: enabled 1 MSI-x vector(s) for NIC
be2net 0000:04:00.7: created 1 TX queue(s)
be2net 0000:04:00.7: created 0 RSS queue(s) and 1 default RX queue
be2net 0000:04:00.7: Emulex OneConnect(be3): PF FLEX10 port 1
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:03: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si 00:03: Found new BMC (man_id: 0x00000b, prod_id: 0x2020, dev_id: 0x13)
ipmi_si 00:03: IPMI kcs interface initialized
power_meter ACPI000D:00: Found ACPI power meter.
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:1: Attached scsi generic sg1 type 0
sd 0:0:0:2: Attached scsi generic sg2 type 0
sd 0:0:0:3: Attached scsi generic sg3 type 0
sd 0:0:0:4: Attached scsi generic sg4 type 0
sd 0:0:0:5: Attached scsi generic sg5 type 0
scsi 0:0:0:254: Attached scsi generic sg6 type 13
scsi 0:0:1:0: Attached scsi generic sg7 type 12
sd 0:0:1:1: Attached scsi generic sg8 type 0
scsi 0:0:2:0: Attached scsi generic sg9 type 12
sd 0:0:2:1: Attached scsi generic sg10 type 0
scsi 0:0:3:0: Attached scsi generic sg11 type 12
sd 0:0:3:1: Attached scsi generic sg12 type 0
scsi 2:3:0:0: Attached scsi generic sg13 type 12
sd 2:0:0:0: Attached scsi generic sg14 type 0
sd 1:0:0:0: Attached scsi generic sg15 type 0
sd 1:0:0:1: Attached scsi generic sg16 type 0
sd 1:0:0:2: Attached scsi generic sg17 type 0
sd 1:0:0:3: Attached scsi generic sg18 type 0
sd 1:0:0:4: Attached scsi generic sg19 type 0
sd 1:0:0:5: Attached scsi generic sg20 type 0
scsi 1:0:0:254: Attached scsi generic sg21 type 13
scsi 1:0:1:0: Attached scsi generic sg22 type 12
sd 1:0:1:1: Attached scsi generic sg23 type 0
scsi 1:0:2:0: Attached scsi generic sg24 type 12
sd 1:0:2:1: Attached scsi generic sg25 type 0
scsi 1:0:3:0: Attached scsi generic sg26 type 12
sd 1:0:3:1: Attached scsi generic sg27 type 0
scsi 0:0:0:254: Failed to get diagnostic page 0x8000002
scsi 0:0:0:254: Failed to bind enclosure -19
scsi 1:0:0:254: Failed to get diagnostic page 0x8000002
scsi 1:0:0:254: Failed to bind enclosure -19
ses 0:0:0:254: Attached Enclosure device
ses 1:0:0:254: Attached Enclosure device
hpwdt 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
hpwdt: New timer passed in is 30 seconds.
hpwdt 0000:01:00.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 0/OFF), priority: LAST (default = 0/LAST).
hpwdt 0000:01:00.0: HP Watchdog Timer Driver: 1.3.3-rh, timer margin: 30 seconds (nowayout=0).
hpilo 0000:01:00.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
hpilo 0000:01:00.2: setting latency timer to 64
ACPI Warning: SystemIO range 0x0000000000000928-0x000000000000092f conflicts with OpRegion 0x0000000000000920-0x000000000000092f (\SGPE) (20090903/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU8 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU9 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU10 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU12 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU13 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU14 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU15 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU16 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU17 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU18 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU19 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU20 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU21 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU22 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU23 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU24 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU25 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU26 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU27 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU28 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU29 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU30 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU31 sig=0x206d7, pf=0x1, revision=0x70d
platform microcode: firmware: requesting intel-ucode/06-2d-07
Microcode Update Driver: v2.00 , Peter Oruba
microcode: CPU0 updated to revision 0x710, date = 2013-06-17
microcode: CPU1 updated to revision 0x710, date = 2013-06-17
microcode: CPU2 updated to revision 0x710, date = 2013-06-17
microcode: CPU3 updated to revision 0x710, date = 2013-06-17
microcode: CPU4 updated to revision 0x710, date = 2013-06-17
microcode: CPU5 updated to revision 0x710, date = 2013-06-17
microcode: CPU6 updated to revision 0x710, date = 2013-06-17
microcode: CPU7 updated to revision 0x710, date = 2013-06-17
microcode: CPU8 updated to revision 0x710, date = 2013-06-17
microcode: CPU9 updated to revision 0x710, date = 2013-06-17
microcode: CPU10 updated to revision 0x710, date = 2013-06-17
microcode: CPU11 updated to revision 0x710, date = 2013-06-17
microcode: CPU12 updated to revision 0x710, date = 2013-06-17
microcode: CPU13 updated to revision 0x710, date = 2013-06-17
microcode: CPU14 updated to revision 0x710, date = 2013-06-17
microcode: CPU15 updated to revision 0x710, date = 2013-06-17
microcode: CPU16 updated to revision 0x710, date = 2013-06-17
microcode: CPU17 updated to revision 0x710, date = 2013-06-17
microcode: CPU18 updated to revision 0x710, date = 2013-06-17
microcode: CPU19 updated to revision 0x710, date = 2013-06-17
microcode: CPU20 updated to revision 0x710, date = 2013-06-17
microcode: CPU21 updated to revision 0x710, date = 2013-06-17
microcode: CPU22 updated to revision 0x710, date = 2013-06-17
microcode: CPU23 updated to revision 0x710, date = 2013-06-17
microcode: CPU24 updated to revision 0x710, date = 2013-06-17
microcode: CPU25 updated to revision 0x710, date = 2013-06-17
microcode: CPU26 updated to revision 0x710, date = 2013-06-17
microcode: CPU27 updated to revision 0x710, date = 2013-06-17
microcode: CPU28 updated to revision 0x710, date = 2013-06-17
microcode: CPU29 updated to revision 0x710, date = 2013-06-17
microcode: CPU30 updated to revision 0x710, date = 2013-06-17
microcode: CPU31 updated to revision 0x710, date = 2013-06-17
device-mapper: multipath: version 1.6.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: table: 253:2: multipath: error getting device
device-mapper: ioctl: error adding target to table
EXT4-fs (sdj1): mounted filesystem with ordered data mode. Opts:
Adding 4194300k swap on /dev/mapper/vg_el6-lv_swap. Priority:-1 extents:1 across:4194300k SS
device-mapper: table: 253:16: multipath: error getting device
device-mapper: ioctl: error adding target to table
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
type=1305 audit(1424431493.411:3): audit_pid=3045 old=0 auid=4294967295 ses=4294967295 res=1
pcc-cpufreq: (v1.00.00) driver loaded with frequency limits: 1200 MHz, 2600 MHz
eth0: no IPv6 routers present
EXT4-fs (dm-15): mounted filesystem with ordered data mode. Opts:
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts:
EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts:
EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts:
EXT4-fs (dm-12): mounted filesystem with ordered data mode. Opts:
EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts:
EXT4-fs (dm-14): mounted filesystem with ordered data mode. Opts: