dmesg - phpbench1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.0.76-0.11-default (geeko@buildhost) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP Fri Jun 14 08:21:43 UTC 2013 (ccab990)
Command line: root=/dev/sda1 resume=/dev/sda2 splash=silent crashkernel=512M-2G:128M,2G-12G:256M,12G-128G:512M,128G-512G:1G,512G-768G:2G,768G-1024G:3G console=ttyS1,115200n8 vga=0x317
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bfef0000 (usable)
BIOS-e820: 00000000bfef0000 - 00000000bff03000 (ACPI data)
BIOS-e820: 00000000bff03000 - 00000000bff04000 (ACPI NVS)
BIOS-e820: 00000000bff04000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
NX (Execute Disable) protection: active
DMI present.
DMI: SGI.COM AltixXE250/X7DWN, BIOS 1.1b 10/01/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x240000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E3FFF uncachable
E4000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 3FC0000000 uncachable
1 base 0000000000 mask 3E00000000 write-back
2 base 0200000000 mask 3FC0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbfef0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f6850] f6850
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000096000] 96000 size 20480
init_memory_mapping: 0000000000000000-00000000bfef0000
0000000000 - 00bfe00000 page 2M
00bfe00000 - 00bfef0000 page 4k
kernel direct mapping tables up to 0xbfeeffff @ [mem 0x1fffb000-0x1fffffff]
init_memory_mapping: 0000000100000000-0000000240000000
0100000000 - 0240000000 page 2M
kernel direct mapping tables up to 0x23fffffff @ [mem 0xbfeea000-0xbfeeffff]
RAMDISK: 377d0000 - 37ff0000
Reserving 256MB of memory at 624MB for crashkernel (System RAM: 9216MB)
ACPI: RSDP 00000000000f6820 00024 (v02 PTLTD )
ACPI: XSDT 00000000bfefbe9a 000D4 (v01 SMCSLP SUPERMIC 06040000 LTP 00000000)
ACPI: FACP 00000000bff0239c 000F4 (v03 INTEL STOAKLEY 06040000 PTL 00000003)
ACPI: DSDT 00000000bfefda5c 048CC (v01 Intel SEABURG 06040000 MSFT 03000001)
ACPI: FACS 00000000bff03fc0 00040
ACPI: _MAR 00000000bff02490 00030 (v01 Intel OEMDMAR 06040000 LOHR 00000001)
ACPI: TCPA 00000000bff024c0 00032 (v01 Intel STOAKLEY 06040000 LOHR 0000005A)
ACPI: APIC 00000000bff024f2 000D4 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: MCFG 00000000bff025c6 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: HPET 00000000bff02602 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
ACPI: BOOT 00000000bff0263a 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SPCR 00000000bff02662 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
ACPI: ERST 00000000bff026b2 00590 (v01 SMCI ERSTTBL 06040000 SMCI 00000001)
ACPI: HEST 00000000bff02c42 000A8 (v01 SMCI HESTTBL 06040000 SMCI 00000001)
ACPI: BERT 00000000bff02cea 00030 (v01 SMCI BERTTBL 06040000 SMCI 00000001)
ACPI: EINJ 00000000bff02d1a 00170 (v01 SMCI EINJTBL 06040000 SMCI 00000001)
ACPI: SLIC 00000000bff02e8a 00176 (v01 SMCSLP SUPERMIC 06040000 LTP 00000000)
ACPI: SSDT 00000000bfefd7fd 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000bfefd757 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000bfefd6b1 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000bfefd60b 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000bfefd565 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000bfefd4bf 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000bfefd419 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000bfefd373 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000bfefbf6e 01405 (v01 PmRef CpuPm 00003000 INTL 20050228)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000240000000
Initmem setup node 0 0000000000000000-0000000240000000
NODE_DATA [000000023ffd9000 - 000000023fffffff]
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237600000-ffff88023e5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00240000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009b
0: 0x00000100 -> 0x000bfef0
0: 0x00100000 -> 0x00240000
On node 0 totalpages: 2096763
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3918 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 767784 pages, LIFO batch:31
Normal zone: 17920 pages used for memmap
Normal zone: 1292800 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec86000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec86000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec89000] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec89000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 88
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bfef0000 - 00000000bff03000
PM: Registered nosave memory: 00000000bff03000 - 00000000bff04000
PM: Registered nosave memory: 00000000bff04000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff88023fc00000 s75264 r8192 d23040 u262144
pcpu-alloc: s75264 r8192 d23040 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064502
Policy zone: Normal
Kernel command line: root=/dev/sda1 resume=/dev/sda2 splash=silent crashkernel=512M-2G:128M,2G-12G:256M,12G-128G:512M,128G-512G:1G,512G-768G:2G,768G-1024G:3G console=ttyS1,115200n8 vga=0x317
bootsplash: silent mode.
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Memory: 7918268k/9437184k available (4512k kernel code, 1050132k absent, 468784k reserved, 7623k data, 1360k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:262400 nr_irqs:1560 16
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [ttyS1] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2992.534 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.06 BogoMIPS (lpj=11970136)
pid_max: default: 32768 minimum: 301
kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20110413
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5472 @ 3.00GHz stepping 0a
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 96000
NMI watchdog enabled, takes one hw-pmu counter.
#2
smpboot cpu 2: start_ip = 96000
NMI watchdog enabled, takes one hw-pmu counter.
#3
smpboot cpu 3: start_ip = 96000
NMI watchdog enabled, takes one hw-pmu counter.
#4
smpboot cpu 4: start_ip = 96000
NMI watchdog enabled, takes one hw-pmu counter.
#5
smpboot cpu 5: start_ip = 96000
NMI watchdog enabled, takes one hw-pmu counter.
#6
smpboot cpu 6: start_ip = 96000
NMI watchdog enabled, takes one hw-pmu counter.
#7 Ok.
smpboot cpu 7: start_ip = 96000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 8 CPUs
Total of 8 processors activated (47880.27 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at bff03000 (4096 bytes)
print_constraints: dummy:
Time: 10:45:28 Date: 02/20/15
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-0a] at [mem 0xe0000000-0xe0afffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe0afffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
\_SB_:_OSC evaluation returned wrong type
_OSC request data:1 17
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfebfffff]
pci 0000:00:00.0: [8086:4003] type 0 class 0x000600
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: [8086:4021] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: [8086:4023] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:05.0: [8086:4025] type 1 class 0x000604
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:07.0: [8086:4027] type 1 class 0x000604
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:09.0: [8086:4029] type 1 class 0x000604
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0f.0: [8086:402f] type 0 class 0x000880
pci 0000:00:0f.0: reg 10: [mem 0xfe700000-0xfe703fff 64bit]
pci 0000:00:10.0: [8086:4030] type 0 class 0x000600
pci 0000:00:10.1: [8086:4030] type 0 class 0x000600
pci 0000:00:10.2: [8086:4030] type 0 class 0x000600
pci 0000:00:10.3: [8086:4030] type 0 class 0x000600
pci 0000:00:10.4: [8086:4030] type 0 class 0x000600
pci 0000:00:11.0: [8086:4031] type 0 class 0x000600
pci 0000:00:15.0: [8086:4035] type 0 class 0x000600
pci 0000:00:15.1: [8086:4035] type 0 class 0x000600
pci 0000:00:16.0: [8086:4036] type 0 class 0x000600
pci 0000:00:16.1: [8086:4036] type 0 class 0x000600
pci 0000:00:1c.0: [8086:2690] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: [8086:2688] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0x1800-0x181f]
pci 0000:00:1d.1: [8086:2689] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0x1820-0x183f]
pci 0000:00:1d.2: [8086:268a] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0x1840-0x185f]
pci 0000:00:1d.7: [8086:268c] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xd8604000-0xd86043ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2670] type 0 class 0x000601
pci 0000:00:1f.1: [8086:269e] type 0 class 0x000101
pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io 0x1860-0x186f]
pci 0000:00:1f.3: [8086:269b] type 0 class 0x000c05
pci 0000:00:1f.3: reg 20: [io 0x1100-0x111f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: [1000:0058] type 0 class 0x000100
pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
pci 0000:02:00.0: reg 14: [mem 0xd8310000-0xd8313fff 64bit]
pci 0000:02:00.0: reg 1c: [mem 0xd8300000-0xd830ffff 64bit]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x001fffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:03.0: bridge window [mem 0xd8300000-0xd83fffff]
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:05.0: PCI bridge to [bus 03-03]
pci 0000:00:05.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: [8086:3500] type 1 class 0x000604
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.3: [8086:350c] type 1 class 0x000604
pci 0000:04:00.3: PME# supported from D0 D3hot D3cold
pci 0000:04:00.3: PME# disabled
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:07.0: PCI bridge to [bus 04-07]
pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:07.0: bridge window [mem 0xd8500000-0xd85fffff]
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: [8086:3510] type 1 class 0x000604
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:04:00.0: PCI bridge to [bus 05-06]
pci 0000:04:00.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:04:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:04:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: PCI bridge to [bus 06-06]
pci 0000:05:00.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:05:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:05:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.3: PCI bridge to [bus 07-07]
pci 0000:04:00.3: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:04:00.3: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:04:00.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:08:00.0: [8086:10a7] type 0 class 0x000200
pci 0000:08:00.0: reg 10: [mem 0xd8220000-0xd823ffff]
pci 0000:08:00.0: reg 14: [mem 0xd8200000-0xd821ffff]
pci 0000:08:00.0: reg 18: [io 0x3000-0x301f]
pci 0000:08:00.0: reg 1c: [mem 0xd8280000-0xd8283fff]
pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:08:00.1: [8086:10a7] type 0 class 0x000200
pci 0000:08:00.1: reg 10: [mem 0xd8260000-0xd827ffff]
pci 0000:08:00.1: reg 14: [mem 0xd8240000-0xd825ffff]
pci 0000:08:00.1: reg 18: [io 0x3020-0x303f]
pci 0000:08:00.1: reg 1c: [mem 0xd8284000-0xd8287fff]
pci 0000:08:00.1: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:08:00.1: PME# supported from D0 D3hot D3cold
pci 0000:08:00.1: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 08-08]
pci 0000:00:09.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:09.0: bridge window [mem 0xd8200000-0xd82fffff]
pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.0: PCI bridge to [bus 09-09]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0a:01.0: [1002:515e] type 0 class 0x000300
pci 0000:0a:01.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
pci 0000:0a:01.0: reg 14: [io 0x4000-0x40ff]
pci 0000:0a:01.0: reg 18: [mem 0xd8400000-0xd840ffff]
pci 0000:0a:01.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:0a:01.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1e.0: bridge window [mem 0xd8400000-0xd84fffff]
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.BMF0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.BMF0.BPD0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.BMF3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *9
vgaarb: device added: PCI:0000:0a:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009bc00 - 000000000009ffff
reserve RAM buffer: 00000000bfef0000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #4
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #6
Switched to NOHz mode on CPU #3
Switched to NOHz mode on CPU #5
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #7
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0xc0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0024-0x0025]
pnp 00:01: [io 0x0028-0x0029]
pnp 00:01: [io 0x002c-0x002d]
pnp 00:01: [io 0x002e-0x002f]
pnp 00:01: [io 0x0030-0x0031]
pnp 00:01: [io 0x0034-0x0035]
pnp 00:01: [io 0x0038-0x0039]
pnp 00:01: [io 0x003c-0x003d]
pnp 00:01: [io 0x004e-0x004f]
pnp 00:01: [io 0x0050-0x0053]
pnp 00:01: [io 0x0063]
pnp 00:01: [io 0x0065]
pnp 00:01: [io 0x0067]
pnp 00:01: [io 0x0072-0x0077]
pnp 00:01: [io 0x0080]
pnp 00:01: [io 0x0090-0x009f]
pnp 00:01: [io 0x00a4-0x00a5]
pnp 00:01: [io 0x00a8-0x00a9]
pnp 00:01: [io 0x00ac-0x00ad]
pnp 00:01: [io 0x00b0-0x00b5]
pnp 00:01: [io 0x00b8-0x00b9]
pnp 00:01: [io 0x00bc-0x00bd]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0295-0x0296]
pnp 00:01: [io 0x0ca2-0x0ca3]
pnp 00:01: [io 0x0ca8-0x0caf]
pnp 00:01: [io 0x0800-0x080f]
pnp 00:01: [io 0x1000-0x107f]
pnp 00:01: [io 0x1180-0x11bf]
pnp 00:01: [io 0xfe00]
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: [mem 0xfee00000-0xfee0ffff]
pnp 00:01: [mem 0xfec86000-0xfec86fff]
pnp 00:01: [mem 0xfec89000-0xfec89fff]
pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
pnp 00:01: [mem 0xfe000000-0xfe01ffff]
pnp 00:01: [mem 0xfe600000-0xfe6fffff]
pnp 00:01: [mem 0xfed20000-0xfed44fff]
pnp 00:01: [mem 0xfed45000-0xfed8ffff]
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0295-0x0296] has been reserved
system 00:01: [io 0x0ca2-0x0ca3] has been reserved
system 00:01: [io 0x0ca8-0x0caf] has been reserved
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x1000-0x107f] has been reserved
system 00:01: [io 0x1180-0x11bf] has been reserved
system 00:01: [io 0xfe00] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee0ffff] could not be reserved
system 00:01: [mem 0xfec86000-0xfec86fff] could not be reserved
system 00:01: [mem 0xfec89000-0xfec89fff] could not be reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfe000000-0xfe01ffff] has been reserved
system 00:01: [mem 0xfe600000-0xfe6fffff] has been reserved
system 00:01: [mem 0xfed20000-0xfed44fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x0081-0x0091]
pnp 00:02: [io 0x0093-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x00f0-0x00fe]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x0070-0x0071]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [mem 0xff000000-0xffffffff]
pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:0a: [io 0x03f8-0x03ff]
pnp 00:0a: [irq 4]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0b: [io 0x02f8-0x02ff]
pnp 00:0b: [irq 3]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 3 pci_try_num: 4
pci 0000:00:03.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff pref]
pci 0000:00:09.0: BAR 15: assigned [mem 0xc0200000-0xc02fffff pref]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0300000-0xc04fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0500000-0xc06fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:02:00.0: BAR 6: assigned [mem 0xc0000000-0xc01fffff pref]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:03.0: bridge window [mem 0xd8300000-0xd83fffff]
pci 0000:00:03.0: bridge window [mem 0xc0000000-0xc01fffff pref]
pci 0000:00:05.0: PCI bridge to [bus 03-03]
pci 0000:00:05.0: bridge window [io disabled]
pci 0000:00:05.0: bridge window [mem disabled]
pci 0000:00:05.0: bridge window [mem pref disabled]
pci 0000:05:00.0: PCI bridge to [bus 06-06]
pci 0000:05:00.0: bridge window [io disabled]
pci 0000:05:00.0: bridge window [mem disabled]
pci 0000:05:00.0: bridge window [mem pref disabled]
pci 0000:04:00.0: PCI bridge to [bus 05-06]
pci 0000:04:00.0: bridge window [io disabled]
pci 0000:04:00.0: bridge window [mem disabled]
pci 0000:04:00.0: bridge window [mem pref disabled]
pci 0000:04:00.3: PCI bridge to [bus 07-07]
pci 0000:04:00.3: bridge window [io disabled]
pci 0000:04:00.3: bridge window [mem disabled]
pci 0000:04:00.3: bridge window [mem pref disabled]
pci 0000:00:07.0: PCI bridge to [bus 04-07]
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem 0xd8500000-0xd85fffff]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:08:00.0: BAR 6: assigned [mem 0xc0200000-0xc021ffff pref]
pci 0000:08:00.1: BAR 6: assigned [mem 0xc0220000-0xc023ffff pref]
pci 0000:00:09.0: PCI bridge to [bus 08-08]
pci 0000:00:09.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:09.0: bridge window [mem 0xd8200000-0xd82fffff]
pci 0000:00:09.0: bridge window [mem 0xc0200000-0xc02fffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 09-09]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xc0300000-0xc04fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0500000-0xc06fffff 64bit pref]
pci 0000:0a:01.0: BAR 6: assigned [mem 0xd8420000-0xd843ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1e.0: bridge window [mem 0xd8400000-0xd84fffff]
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:00:01.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:07.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
pci 0000:00:07.0: setting latency timer to 64
pci 0000:04:00.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
pci 0000:04:00.0: setting latency timer to 64
pci 0000:05:00.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
pci 0000:05:00.0: setting latency timer to 64
pci 0000:04:00.3: setting latency timer to 64
pci 0000:00:09.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xd8300000-0xd83fffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff pref]
pci_bus 0000:04: resource 1 [mem 0xd8500000-0xd85fffff]
pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:08: resource 1 [mem 0xd8200000-0xd82fffff]
pci_bus 0000:08: resource 2 [mem 0xc0200000-0xc02fffff pref]
pci_bus 0000:09: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:09: resource 1 [mem 0xc0300000-0xc04fffff]
pci_bus 0000:09: resource 2 [mem 0xc0500000-0xc06fffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:0a: resource 1 [mem 0xd8400000-0xd84fffff]
pci_bus 0000:0a: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0a: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0a: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0a: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:0a: resource 10 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.7: PCI INT D disabled
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
PCI: CLS mismatch (32 != 64), using 64 bytes
pci 0000:08:00.0: Disabling L0s
pci 0000:08:00.1: Disabling L0s
pci 0000:0a:01.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 8320k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800bbeea000 - ffff8800bfeea000
software IO TLB at phys 0xbbeea000 - 0xbfeea000
Simple Boot Flag at 0x41 set to 0x80
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1424429127.560:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 3870
alg: No test for stdrng (krng)
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 88 for MSI/MSI-X
vesafb: mode is 1024x768x16, linelength=2048, pages=20
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90002300000, using 3072k, total 32768k
bootsplash 3.2.0-2010/03/31: looking for picture...
bootsplash: silentjpeg size 59221 bytes
bootsplash: ...found (1024x768, 31358 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x2220
intel_idle: does not run on family 6 model 23
ERST pstore disabled, enforce via pstore.backend=erst
ERST: Could not register with persistent store
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Fixed MDIO Bus: probed
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
Registering the dns_resolver key type
Loading module verification certificates
MODSIGN: Loaded cert 'SUSE Linux Enterprise Secure Boot Signkey: 3fb077b6cebc6ff2522e1c148c57c777c788e3e7'
MODSIGN: Loaded cert 'SUSE Linux Enterprise Secure Boot Signkey: 3fb077b6cebc6ff2522e1c148c57c777c788e3e7'
PM: Checking hibernation image partition /dev/sda2
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 3:772:780
Freeing unused kernel memory: 1360k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1612k freed
Freeing unused kernel memory: 948k freed
SCSI subsystem initialized
Fusion MPT base driver 4.28.00.01suse
Copyright (c) 1999-2010 LSI Corporation
Fusion MPT SAS Host driver 4.28.00.01suse
mptsas 0000:02:00.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50
mptbase: ioc0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total memory = 7930508 kB
mptbase: ioc0: Initiating bringup
Refined TSC clocksource calibration: 2992.499 MHz.
Switching to clocksource tsc
ioc0: LSISAS1068E B3: Capabilities={Initiator}
mptsas 0000:02:00.0: setting latency timer to 64
scsi0 : ioc0: LSISAS1068E B3, FwRev=01170400h, Ports=1, MaxQ=286, IRQ=50
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 0, phy 7, sas_addr 0x5000c50004f2eca9
scsi target0:0:0: mptsas: ioc0: add device: fw_channel 0, fw_id 0, phy 7, sas_addr 0x5000c50004f2eca9
scsi 0:0:0:0: Direct-Access SEAGATE ST3146356SS 0004 PQ: 0 ANSI: 5
scsi 0:0:0:0: mptscsih: ioc0: qdepth=64, tagged=1, simple=1, ordered=0, scsi_level=6, cmd_que=1
sdev dma_alignment 511
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata2: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
ata3: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
ata3: port disabled. ignoring.
alua: device handler registered
emc: device handler registered
hp_sw: device handler registered
rdac: device handler registered
udev: starting version 147
ACPI: acpi_idle registered with cpuidle
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8604000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.0.76-0.11-default ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.0.76-0.11-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.0.76-0.11-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.0.76-0.11-default uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-6: new high-speed USB device number 3 using ehci_hcd
usb 1-6: device descriptor read/64, error -71
usb 1-6: device descriptor read/64, error -71
usb 1-6: new high-speed USB device number 4 using ehci_hcd
usb 1-6: device descriptor read/64, error -71
usb 1-6: device descriptor read/64, error -71
usb 1-6: new high-speed USB device number 5 using ehci_hcd
usb 1-6: device not accepting address 5, error -71
usb 1-6: new high-speed USB device number 6 using ehci_hcd
sd 0:0:0:0: [sda] 286749488 512-byte logical blocks: (146 GB/136 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: b3 00 10 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 10, phy 6, sas_addr 0x5000c50004f2f2a9
sda: sda1 sda2
scsi target0:0:1: mptsas: ioc0: add device: fw_channel 0, fw_id 10, phy 6, sas_addr 0x5000c50004f2f2a9
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 0:0:1:0: Direct-Access SEAGATE ST3146356SS 0004 PQ: 0 ANSI: 5
scsi 0:0:1:0: mptscsih: ioc0: qdepth=64, tagged=1, simple=1, ordered=0, scsi_level=6, cmd_que=1
sdev dma_alignment 511
sd 0:0:1:0: [sdb] 286749488 512-byte logical blocks: (146 GB/136 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: b3 00 10 08
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
sdb: sdb1 sdb2
sd 0:0:1:0: [sdb] Attached SCSI disk
usb 1-6: device not accepting address 6, error -71
hub 1-0:1.0: unable to enumerate USB device on port 6
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
checking generic (d0000000 2000000) vs hw (d0000000 8000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
radeon 0000:0a:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x15D9:0xA280).
usb 2-1: new low-speed USB device number 2 using uhci_hcd
[drm] register mmio base: 0xD8400000
[drm] register mmio size: 65536
radeon 0000:0a:01.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (32M used)
radeon 0000:0a:01.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
mtrr: type mismatch for d0000000,8000000 old: write-back new: write-combining
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone kernel: Available graphics memory: 3965254 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 32M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCI GART of 512M enabled (table at 0x0000000037880000).
radeon 0000:0a:01.0: WB disabled
radeon 0000:0a:01.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff88003785f000
[drm] Loading R100 Microcode
[drm] radeon: ring at 0x00000000B0001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] No TV DAC info found in BIOS
[drm] No valid Ext TMDS info found in BIOS
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
usb 2-1: New USB device found, idVendor=04b3, idProduct=3025
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB NetVista Full Width Keyboard.
usb 2-1: Manufacturer: LITE-ON Technology
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] DVI-I-1
[drm] HPD2
[drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[drm] Encoders:
[drm] CRT2: INTERNAL_DAC2
[drm] DFP2: INTERNAL_DVO1
input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input0
generic-usb 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-0000:00:1d.0-1/input0
composite sync not supported
composite sync not supported
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
[drm] fb mappable at 0xD0040000
[drm] vram apper at 0xD0000000
[drm] size 1572864
[drm] fb depth is 16
[drm] pitch is 2048
fbcon: radeondrmfb (fb0) is primary device
usb 4-2: new full-speed USB device number 2 using uhci_hcd
usb 4-2: not running at top speed; connect to a high speed hub
usb 4-2: New USB device found, idVendor=14dd, idProduct=0002
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-2: Product: Multidevice
usb 4-2: Manufacturer: Peppercon AG
usb 4-2: SerialNumber: 0f26aa01c346a4362DFD5493FE193F22
input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.2/input/input1
generic-usb 0003:14DD:0002.0002: input,hidraw1: USB HID v1.01 Mouse [Peppercon AG Multidevice] on usb-0000:00:1d.2-2/input2
input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.3/input/input2
generic-usb 0003:14DD:0002.0003: input,hidraw2: USB HID v1.01 Keyboard [Peppercon AG Multidevice] on usb-0000:00:1d.2-2/input3
Console: switching to colour frame buffer device 124x44
radeon 0000:0a:01.0: fb0: radeondrmfb frame buffer device
radeon 0000:0a:01.0: registered panic notifier
[drm] Initialized radeon 2.24.0 20080528 for 0000:0a:01.0 on minor 0
PM: Marking nosave pages: 000000000009b000 - 0000000000100000
PM: Marking nosave pages: 00000000bfef0000 - 0000000100000000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
PM: Starting manual resume from disk
PM: Hibernation image partition 8:2 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
Disabling lock debugging due to kernel taint
SGI Enhanced XFS with ACLs, realtime, large block/inode numbers, no debug enabled
SGI Enhanced XFS compiled Jan 29 2014 07:00:33
SGI Enhanced XFS with CXFS support
SGI Enhanced XFS with DMAPI support
SGI Enhanced XFS Quota Management subsystem
XFS (sda1): Mounting Filesystem
XFS (sda1): Ending clean mount
udev: starting version 147
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
input: PC Speaker as /devices/platform/pcspkr/input/input5
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
NET: Registered protocol family 10
dca service started, version 1.12.1
Fusion MPT misc device (ioctl) driver 4.28.00.01suse
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Initializing USB Mass Storage driver...
scsi3 : usb-storage 4-2:1.0
scsi4 : usb-storage 4-2:1.1
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
ioatdma: Intel(R) QuickData Technology Driver 4.00
ioatdma 0000:00:0f.0: PCI INT A -> GSI 57 (level, low) -> IRQ 57
ioatdma 0000:00:0f.0: setting latency timer to 64
ioatdma 0000:00:0f.0: channel enumeration error
ioatdma 0000:00:0f.0: Intel(R) I/OAT DMA Engine init failed
ioatdma 0000:00:0f.0: PCI INT A disabled
PTP clock support registered
intel_rng: FWH not detected
igb: Intel(R) Gigabit Ethernet Network Driver - version 4.1.2-k
igb: Copyright (c) 2007-2012 Intel Corporation.
igb 0000:08:00.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
igb 0000:08:00.0: setting latency timer to 64
igb 0000:08:00.0: irq 89 for MSI/MSI-X
igb 0000:08:00.0: irq 90 for MSI/MSI-X
igb 0000:08:00.0: irq 91 for MSI/MSI-X
igb 0000:08:00.0: irq 92 for MSI/MSI-X
igb 0000:08:00.0: irq 93 for MSI/MSI-X
igb 0000:08:00.0: irq 94 for MSI/MSI-X
igb 0000:08:00.0: irq 95 for MSI/MSI-X
igb 0000:08:00.0: irq 96 for MSI/MSI-X
igb 0000:08:00.0: irq 97 for MSI/MSI-X
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:08:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:c6:0e:aa
igb 0000:08:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:08:00.1: PCI INT B -> GSI 70 (level, low) -> IRQ 70
igb 0000:08:00.1: setting latency timer to 64
igb 0000:08:00.1: irq 98 for MSI/MSI-X
igb 0000:08:00.1: irq 99 for MSI/MSI-X
igb 0000:08:00.1: irq 100 for MSI/MSI-X
igb 0000:08:00.1: irq 101 for MSI/MSI-X
igb 0000:08:00.1: irq 102 for MSI/MSI-X
igb 0000:08:00.1: irq 103 for MSI/MSI-X
igb 0000:08:00.1: irq 104 for MSI/MSI-X
igb 0000:08:00.1: irq 105 for MSI/MSI-X
igb 0000:08:00.1: irq 106 for MSI/MSI-X
igb 0000:08:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:08:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:c6:0e:ab
igb 0000:08:00.1: eth1: PBA No: FFFFFF-0FF
igb 0000:08:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
scsi 4:0:0:0: CD-ROM PepperC Virtual Disc 2 0.01 PQ: 0 ANSI: 3
scsi 4:0:0:0: Attached scsi generic sg2 type 5
scsi 3:0:0:0: CD-ROM PepperC Virtual Disc 1 0.01 PQ: 0 ANSI: 3
scsi 3:0:0:0: Attached scsi generic sg3 type 5
sr0: scsi-1 drive
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi-1 drive
sr 3:0:0:0: Attached scsi CD-ROM sr1
Adding 37752828k swap on /dev/sda2. Priority:-1 extents:1 across:37752828k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
sgi_os_lib: module license 'Proprietary' taints kernel.
SGI os-lib starting
sgiapi minor 59
Systune static_dummy is set to 0 (Default)
Systune run_dummy is set to 0 (Default)
Systune sgitrc_dbgtrc_def_level is set to 255 (Default)
Systune sgitrc_dbgtrc_entries is set to 1024 (Default)
SGI path manager starting; drain elevator workaround
Systune pm_debug_path_ref_count is set to 1 (Default)
Systune pm_debug_pmdev_ref_count is set to 1 (Default)
Systune pm_small_io_size_limit is set to 32768 (Default)
Systune pm_debug_verbose_log is set to 0 (Default)
Systune pm_debug_teardown_flag is set to 0 (Default)
PM init pm_major:fc
XVM starting ... T10PI
Systune xvm_distribution_size is set to 2097152 (Default)
Systune xvm_defeat_stripe_unit_in_min_io is set to 0 (Default)
Systune xvm_multicast_pri is set to 90 (Default)
Systune xvm_drl_pri is set to 90 (Default)
Systune xvm_io_pri is set to 90 (Default)
Systune xvm_revive_pri is set to 90 (Default)
Systune xvm_max_revive_threads is set to 4 (Default)
Systune xvm_max_revive_rsc is set to 5 (Default)
Systune xvm_revive_win_factor is set to 2 (Default)
Systune xvm_maxfs_revive is set to 1 (Default)
Systune xvm_mr_daemon_min is set to 1 (Default)
Systune xvm_mr_daemon_max is set to 25 (Default)
Systune xvm_congestion_check is set to 0 (Default)
Systune xvm_verbose_debug is set to 0 (Default)
XVM hostname: cz-issp1
XVM: ready
loop: module loaded
fuse init (API version 7.16)
microcode: CPU0 sig=0x1067a, pf=0x40, revision=0xa07
microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
microcode: CPU1 sig=0x1067a, pf=0x40, revision=0xa07
microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
microcode: CPU2 sig=0x1067a, pf=0x40, revision=0xa07
microcode: CPU2 updated to revision 0xa0b, date = 2010-09-28
microcode: CPU3 sig=0x1067a, pf=0x40, revision=0xa07
microcode: CPU3 updated to revision 0xa0b, date = 2010-09-28
microcode: CPU4 sig=0x1067a, pf=0x40, revision=0xa07
microcode: CPU4 updated to revision 0xa0b, date = 2010-09-28
microcode: CPU5 sig=0x1067a, pf=0x40, revision=0xa07
microcode: CPU5 updated to revision 0xa0b, date = 2010-09-28
microcode: CPU6 sig=0x1067a, pf=0x40, revision=0xa07
microcode: CPU6 updated to revision 0xa0b, date = 2010-09-28
microcode: CPU7 sig=0x1067a, pf=0x40, revision=0xa07
microcode: CPU7 updated to revision 0xa0b, date = 2010-09-28
microcode: Microcode Update Driver: v2.00 , Peter Oruba
ts: loaded
st: Version 20101219, fixed bufsize 32768, s/g segs 256
NET: Registered protocol family 27
NET: Registered protocol family 28
ADDRCONF(NETDEV_UP): eth0: link is not ready
NET: Registered protocol family 17
ADDRCONF(NETDEV_UP): eth1: link is not ready
igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0028c5, prod_id: 0x0004, dev_id: 0x22)
ipmi_si ipmi_si.0: IPMI kcs interface initialized
ipmi device interface
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
usb 4-2: reset full-speed USB device number 2 using uhci_hcd
usb 4-2: reset full-speed USB device number 2 using uhci_hcd
ADDRCONF(NETDEV_UP): eth0: link is not ready
igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
usb 2-1: USB disconnect, device number 2
usb 2-2: new low-speed USB device number 3 using uhci_hcd
usb 2-2: New USB device found, idVendor=04b3, idProduct=3025
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB NetVista Full Width Keyboard.
usb 2-2: Manufacturer: LITE-ON Technology
input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
generic-usb 0003:04B3:3025.0004: input,hidraw0: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-0000:00:1d.0-2/input0
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A