dmesg - 150219_odroid-U3_MP3
Booting Linux on physical CPU 0xa00
Initializing cgroup subsys cpuset
Linux version 3.8.13.23 (root@THEserver) (gcc version 4.7.2 (crosstool-NG 1.17.0) ) #1 SMP PREEMPT Tue Jun 3 16:01:36 UTC 2014 ()
Kernel was built at commit id '884336d'
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: ODROID-U2/U3
cma: CMA: reserved 64 MiB at 43000000
cma: CMA: reserved 64 MiB at 51000000
cma: CMA: reserved 128 MiB at 67800000
Memory policy: ECC disabled, Data cache writealloc
CPU EXYNOS4412 (id 0xe4412220)
exynos4_init_clocks: initializing clocks
S3C24XX Clocks, Copyright 2004 Simtec Electronics
s3c_register_clksrc: clock armclk has no registers set
s3c_register_clksrc: clock audiocdclk has no registers set
audiocdclk: no parent clock specified
exynos4_setup_clocks: registering clocks
exynos4_setup_clocks: xtal is 24000000
EXYNOS4: PLL settings, A=1000000000, M=880000000, E=96000000 V=350000000
EXYNOS4: ARMCLK=1000000000, DMC=440000000, ACLK200=176000000
ACLK100=110000000, ACLK160=176000000, ACLK133=146666666
sclk_pwm: source is ext_xtal (0), rate is 24000000
sclk_csis: source is xusbxti (1), rate is 1500000
sclk_csis: source is xusbxti (1), rate is 1500000
sclk_cam0: source is xusbxti (1), rate is 1500000
sclk_cam1: source is xusbxti (1), rate is 1500000
sclk_fimc: source is xusbxti (1), rate is 1500000
sclk_fimc: source is xusbxti (1), rate is 1500000
sclk_fimc: source is xusbxti (1), rate is 1500000
sclk_fimc: source is xusbxti (1), rate is 1500000
sclk_fimd: source is mout_mpll_user (6), rate is 55000000
sclk_mfc: source is mout_mfc0 (0), rate is 55000000
sclk_g3d: source is mout_g3d0 (0), rate is 55000000
On node 0 totalpages: 524032
Normal zone: 1520 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 193040 pages, LIFO batch:31
HighMem zone: 2574 pages used for memmap
HighMem zone: 326898 pages, LIFO batch:31
Running under secure firmware.
PERCPU: Embedded 7 pages/cpu @c16dc000 s8000 r8192 d12480 u32768
pcpu-alloc: s8000 r8192 d12480 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519938
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Memory: 2047MB = 2047MB total
Memory: 1807052k/3614104k available, 578152k reserved, 1317888K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc05f0380 (6049 kB)
.init : 0xc05f1000 - 0xc061cf40 ( 176 kB)
.data : 0xc061e000 - 0xc0686fe0 ( 420 kB)
.bss : 0xc0686fe0 - 0xc06c6414 ( 254 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:549
MCT clocksource init timer with clk_rate=24000000 hz
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
Console: colour dummy device 80x30
console [tty1] enabled
Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
Setting up static identity map for 0x4045de60 - 0x4045deb8
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
CPU2: Booted secondary processor
CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
CPU3: Booted secondary processor
CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
Brought up 4 CPUs
SMP: Total of 4 processors activated (7969.17 BogoMIPS).
devtmpfs: initialized
regulator-dummy: no parameters
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
s5p_hdmi_cec_set_platdata()
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
S3C Power Management, Copyright 2004 Simtec Electronics
EXYNOS4x12 PMU Initialize
EXYNOS: Initializing architecture
s3c24xx-pwm s3c24xx-pwm.0: tin at 110000000, tdiv at 110000000, tin=divclk, base 0
s3c24xx-pwm s3c24xx-pwm.1: tin at 110000000, tdiv at 110000000, tin=divclk, base 8
bio: create slab at 0
hdmi_5v: 5000 mV
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-gpio i2c-gpio.2: using pins 6 (SDA) and 7 (SCL)
s3c-i2c s3c2440-i2c.0: slave address 0x10
s3c-i2c s3c2440-i2c.0: bus frequency set to 214 KHz
max77686 0-0009: device found
LDO1 VDD_ALIVE: 1000 mV
LDO2 VDDQ_M1_1V8: 1800 mV
LDO3 VDDQ_AUD_1V8: 1800 mV
LDO4 VDDQ_MMC2_2V8: 2800 mV
LDO5 VDDQ_MMC1_1V8: 1800 mV
LDO6 VDD10_MPLL_1V0: 1000 mV
LDO7 VDD10_EPLL_1V0: 1000 mV
LDO8 VDD10_MIPI_1V0: 1000 mV
LDO9 VT_CORE_1V0: ODROIDU2: Disabled regulator
LDO9 VT_CORE_1V0: 1000 mV
LDO10 VDD18_MIPI_1V8: 1800 mV
LDO11 VDD18_ABB1_1V8: 1800 mV
vdd_ldo12 range: 3300 mV
LDO13 VDD18_MIPIHSI_1V8: 1800 mV
LDO14 VDD18_ADC_1V8: 1800 mV
vdd_ldo15 range: 1000 mV
LDO16 VDD18_HSIC: 1800 mV
LDO17 VDDQ_CAM_1V8: 1800 mV
LDO18 VDDQ_ISP_1V8: ODROIDU2: Disabled regulator
LDO18 VDDQ_ISP_1V8: 1800 mV
LDO19 VT_CAM_1V8: ODROIDU2: Disabled regulator
LDO19 VT_CAM_1V8: 1800 mV
vddq_emmc_1V8: 1800 3000 mV at 1800 mV
LDO21 TFLASH_2V8: 2800 mV
vddf_emmc_2V85: 2850 mV
LDO23 VDD_TOUCH_2V8: ODROIDU2: Disabled regulator
LDO23 VDD_TOUCH_2V8: 2800 mV
LDO24 VDD_TOUCHLED_3V3: ODROIDU2: Disabled regulator
LDO24 VDD_TOUCHLED_3V3: 3300 mV
LDO25 VDDQ_LCD_3V0: 1800 mV
LDO26 VDD_MOTOR_3V0: ODROIDU2: Disabled regulator
LDO26 VDD_MOTOR_3V0: 3000 mV
BUCK1 vdd_mif: 1100 mV
BUCK2 vdd_arm: 800 1500 mV at 1100 mV
BUCK3 vdd_int: 1125 mV
BUCK4 vdd_g3d: 850 1200 mV at 1000 mV
BUCK5 VDDQ_CKEM1_2: 1200 mV
BUCK6 1V35: 1350 mV
BUCK7 2V0: 2000 mV
ODROIDU2: Regulator BUCK8
BUCK8 3V0: 3300 mV
BUCK9 1V2: ODROIDU2: Disabled regulator
BUCK9 1V2: 1200 mV
s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
s3c-i2c s3c2440-i2c.1: slave address 0x10
s3c-i2c s3c2440-i2c.1: bus frequency set to 214 KHz
s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
s3c-i2c s3c2440-i2c.3: slave address 0x10
s3c-i2c s3c2440-i2c.3: bus frequency set to 214 KHz
s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
s3c-i2c s3c2440-i2c.7: slave address 0x10
s3c-i2c s3c2440-i2c.7: bus frequency set to 214 KHz
s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 214 KHz
s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource mct-frc
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 24576 bytes)
UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 2040K
CPU PMU: probing PMU on CPU 0
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
bounce pool size: 64 pages
msgmni has been set to 1471
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
SoftPWM v0.2-acme initializing.
Clock resolution is 1ns
SoftPWM initialized.
dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
console [ttySAC1] enabled
exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
[drm] Initialized drm 1.1.0 20060810
i2c i2c-2: attached s5p_ddc into i2c adapter successfully
i2c i2c-8: attached s5p_hdmiphy into i2c adapter successfully
exynos-mixer s5p-mixer: probe start
s5p-g2d s5p-g2d.0: The exynos g2d(ver 4.1) successfully probed
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
exynos-drm exynos-drm: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
Console: switching to colour frame buffer device 128x48
exynos-drm exynos-drm: fb0: frame buffer device
exynos-drm exynos-drm: registered panic notifier
[drm] Initialized exynos 1.0.0 20110530 on minor 0
mali-utgard mali-utgard.0: start latency exceeded, new value 584 ns
mali-utgard mali-utgard.0: state restore latency exceeded, new value 4333 ns
Mali: init_mali_clock mali_clock c0645ba8
mali-utgard mali-utgard.0: stop latency exceeded, new value 500 ns
mali-utgard mali-utgard.0: state save latency exceeded, new value 2625 ns
pd-g3d: Power-off latency exceeded, new value 232583 ns
Mali: Mali device driver loaded
brd: module loaded
loop: module loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
s5p-ehci s5p-ehci: S5P EHCI Host Controller
s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: S5P EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.13.23 ehci_hcd
usb usb1: SerialNumber: s5p-ehci
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
exynos-ohci exynos-ohci: Already power on PHY
exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EXYNOS OHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.13.23 ohci_hcd
usb usb2: SerialNumber: exynos-ohci
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb3503 0-0008: USB3503_SP_ILOCK = 0x32
usb 1-2: new high-speed USB device number 2 using s5p-ehci
usb3503 0-0008: switched to HUB mode
usb3503 0-0008: usb3503_probe: probed on hub mode
s3c-hsotg s3c-hsotg: regs f0080000, irq 103
s3c-hsotg s3c-hsotg: Already power on PHY
s3c-hsotg s3c-hsotg: EPs:15
s3c-hsotg s3c-hsotg: dedicated fifos
s3c-hsotg s3c-hsotg: still being used
max77686-rtc max77686-rtc: max77686_rtc_probe
usb 1-2: New USB device found, idVendor=0424, idProduct=9730
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0
s5p-fimc exynos4-fimc.0: sclk_fimc rate is 176000000
s5p-fimc exynos4-fimc.0: start latency exceeded, new value 625 ns
s5p-fimc exynos4-fimc.0: state restore latency exceeded, new value 15833 ns
s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 500 ns
s5p-fimc exynos4-fimc.0: state save latency exceeded, new value 3125 ns
s5p-fimc exynos4-fimc.1: sclk_fimc rate is 176000000
s5p-fimc exynos4-fimc.1: start latency exceeded, new value 375 ns
s5p-fimc exynos4-fimc.1: state restore latency exceeded, new value 15042 ns
s5p-fimc exynos4-fimc.1: stop latency exceeded, new value 500 ns
s5p-fimc exynos4-fimc.1: start latency exceeded, new value 416 ns
s5p-fimc exynos4-fimc.2: sclk_fimc rate is 176000000
s5p-fimc exynos4-fimc.1: state save latency exceeded, new value 2666 ns
s5p-fimc exynos4-fimc.2: start latency exceeded, new value 416 ns
s5p-fimc exynos4-fimc.2: state restore latency exceeded, new value 14791 ns
s5p-fimc exynos4-fimc.2: stop latency exceeded, new value 458 ns
s5p-fimc exynos4-fimc.2: start latency exceeded, new value 458 ns
s5p-fimc exynos4-fimc.3: sclk_fimc rate is 176000000
s5p-fimc exynos4-fimc.2: state save latency exceeded, new value 2417 ns
s5p-fimc exynos4-fimc.3: start latency exceeded, new value 416 ns
s5p-fimc exynos4-fimc.3: state restore latency exceeded, new value 14917 ns
s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 500 ns
s5p-fimc exynos4-fimc.3: start latency exceeded, new value 459 ns
s5p-fimc-md: Registered fimc.0.m2m as /dev/video10
s5p-fimc-md: Registered fimc.0.capture as /dev/video11
s5p-fimc-md: Registered fimc.1.m2m as /dev/video12
s5p-fimc-md: Registered fimc.1.capture as /dev/video13
s5p-fimc-md: Registered fimc.2.m2m as /dev/video14
s5p-fimc-md: Registered fimc.2.capture as /dev/video15
s5p-fimc-md: Registered fimc.3.m2m as /dev/video16
s5p-fimc-md: Registered fimc.3.capture as /dev/video17
s5p-jpeg s5p-jpeg.0: encoder device registered as /dev/video20
s5p-jpeg s5p-jpeg.0: decoder device registered as /dev/video21
s5p-jpeg s5p-jpeg.0: Samsung S5P JPEG codec
sclk_mfc rate is: 220
s5p-mfc s5p-mfc: decoder registered as /dev/video8
s5p-mfc s5p-mfc: encoder registered as /dev/video9
Exynos: Kernel Thermal management registered
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (440000000 Hz)
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA
usb 1-3: new high-speed USB device number 3 using s5p-ehci
s5p-fimc exynos4-fimc.3: state save latency exceeded, new value 2834 ns
s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 625 ns
dw_mmc dw_mmc: Using internal DMA controller.
pd-cam: Power-off latency exceeded, new value 234458 ns
usb 1-3: New USB device found, idVendor=0424, idProduct=3503
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 3 ports detected
DWMMC: Div 2 = 130
dw_mmc dw_mmc: Version ID is 240a
dw_mmc dw_mmc: DW MMC controller at irq 109, 32 bit host data width, 128 deep fifo
mmc_host mmc1: Bus speed (slot 0) = 104000000Hz (slot req 400000Hz, actual 400000HZ div = 130)
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
cec: Probe start
s5p_cec_probe: pdata=e70da900
s5p_cec_mem_probe(): mapped cec_base to f007c000, size 0x1000
cec: Requesting irq 146 for s5p-cec
cec: probe successful
mmc1: BKOPS_EN bit is not set
DWMMC: Div 2 = 1
mmc_host mmc1: Bus speed (slot 0) = 104000000Hz (slot req 52000000Hz, actual 52000000HZ div = 1)
max98090 1-0010: MAX98090 REVID=0x43
mmc1: new high speed DDR MMC card at address 0001
mmcblk0: mmc1:0001 008G92 7.28 GiB
mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB
mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB
mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB
mmcblk0: p1 p2
mmcblk0boot1: unknown partition table
mmcblk0boot0: unknown partition table
hkdk-snd-max98090 hkdk-snd-max98090: HiFi samsung-i2s.0 mapping ok
hkdk-snd-max98090 hkdk-snd-max98090: HiFi samsung-i2s.0 mapping ok
TCP: cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
NET: Registered protocol family 35
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
ThumbEE CPU extension supported.
pd-gps: Power-off latency exceeded, new value 4304833 ns
Registering SWP/SWPB emulation handler
registered taskstats version 1
LDO10 VDD18_MIPI_1V8: incomplete constraints, leaving on
pd-lcd0: Power-off latency exceeded, new value 750 ns
pd-lcd1: Power-off latency exceeded, new value 6041833 ns
max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:06 UTC (946688406)
pd-tv: Power-off latency exceeded, new value 12469334 ns
pd-mfc: Power-off latency exceeded, new value 236416 ns
exynos4_dvfs_hotplug_init, max(2000000),min(0)
ALSA device list:
#0: Built-in Audio
Freeing init memory: 172K
usb 1-3.1: new high-speed USB device number 4 using s5p-ehci
systemd-udevd[92]: starting version 204
usb 1-3.1: New USB device found, idVendor=0b95, idProduct=7720
usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.1: Product: AX88772
usb 1-3.1: Manufacturer: ASIX Elec. Corp.
usb 1-3.1: SerialNumber: 000001
EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
init: plymouth-upstart-bridge main process (147) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (157) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: ureadahead main process (150) terminated with status 5
init: plymouth-upstart-bridge main process (160) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
systemd-udevd[267]: starting version 204
input: gpio-keys as /devices/platform/gpio-keys.0/input/input0
pd-cam: Power-on latency exceeded, new value 2321667 ns
s5p-fimc exynos4-fimc.1: start latency exceeded, new value 625 ns
s5p-fimc exynos4-fimc.1: state restore latency exceeded, new value 18917 ns
s5p-fimc exynos4-fimc.1: stop latency exceeded, new value 625 ns
s5p-fimc exynos4-fimc.0: start latency exceeded, new value 709 ns
s5p-fimc exynos4-fimc.0: state restore latency exceeded, new value 17958 ns
s5p-fimc exynos4-fimc.1: start latency exceeded, new value 750 ns
s5p-fimc exynos4-fimc.1: state save latency exceeded, new value 4000 ns
pd-cam: Power-off latency exceeded, new value 1033333 ns
s5p-fimc exynos4-fimc.2: state restore latency exceeded, new value 21667 ns
s5p-fimc exynos4-fimc.2: state save latency exceeded, new value 3000 ns
s5p-fimc exynos4-fimc.3: start latency exceeded, new value 834 ns
s5p-fimc exynos4-fimc.3: state restore latency exceeded, new value 17625 ns
s5p-fimc exynos4-fimc.3: state save latency exceeded, new value 3042 ns
pd-mfc: Power-on latency exceeded, new value 640209 ns
s5p-mfc s5p-mfc: start latency exceeded, new value 583 ns
s5p-mfc s5p-mfc: state restore latency exceeded, new value 2583 ns
smsc95xx v1.0.4
[smsc95xx_read_mac_addr] Mac address = 36:E6:6A:0E:97:B1
s5p-mfc s5p-mfc: stop latency exceeded, new value 1083 ns
s5p-mfc s5p-mfc: state save latency exceeded, new value 1792 ns
pd-mfc: Power-off latency exceeded, new value 1464125 ns
smsc95xx 1-2:1.0 eth0: register 'smsc95xx' at usb-s5p-ehci-2, smsc95xx USB 2.0 Ethernet, 36:e6:6a:0e:97:b1
usbcore: registered new interface driver smsc95xx
asix 1-3.1:1.0 eth1: register 'asix' at usb-s5p-ehci-3.1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:00:65:9b
usbcore: registered new interface driver asix
systemd-udevd[295]: renamed network interface eth1 to eth2
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
smsc95xx 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
init: failsafe main process (587) killed by TERM signal
init: plymouth-upstart-bridge main process ended, respawning
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
asix 1-3.1:1.0 eth2: link down
asix 1-3.1:1.0 eth2: link up, 10Mbps, half-duplex, lpa 0x0000
asix 1-3.1:1.0 eth2: link up, 10Mbps, half-duplex, lpa 0x0000
asix 1-3.1:1.0 eth2: link up, 10Mbps, half-duplex, lpa 0x0000
asix 1-3.1:1.0 eth2: link up, 10Mbps, half-duplex, lpa 0x0000
asix 1-3.1:1.0 eth2: link up, 10Mbps, half-duplex, lpa 0x0000
asix 1-3.1:1.0 eth2: link up, 10Mbps, half-duplex, lpa 0x0000
asix 1-3.1:1.0 eth2: link up, 10Mbps, half-duplex, lpa 0x0000
asix 1-3.1:1.0 eth2: link up, 10Mbps, half-duplex, lpa 0x0000
asix 1-3.1:1.0 eth2: link up, 10Mbps, half-duplex, lpa 0x0000
asix 1-3.1:1.0 eth2: link up, 10Mbps, half-duplex, lpa 0x0000
asix 1-3.1:1.0 eth2: link up, 10Mbps, half-duplex, lpa 0x0000
asix 1-3.1:1.0 eth2: link up, 10Mbps, half-duplex, lpa 0x0000
asix 1-3.1:1.0 eth2: link up, 10Mbps, half-duplex, lpa 0x0000
smsc95xx 1-2:1.0 eth0: link down
smsc95xx 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
asix 1-3.1:1.0 eth2: link up, 10Mbps, half-duplex, lpa 0x0000
UDP: short packet: From 104.130.201.212:0 49251/1480 to 208.47.186.48:0