dmesg - test_n1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-32-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4)
Command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000094caffff] usable
BIOS-e820: [mem 0x0000000094cb0000-0x00000000960affff] reserved
BIOS-e820: [mem 0x00000000960b0000-0x000000009a6befff] usable
BIOS-e820: [mem 0x000000009a6bf000-0x000000009aebefff] reserved
BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001df5fffff] usable
e820: update [mem 0x93c24018-0x93c34057] usable ==> usable
e820: update [mem 0x93c15018-0x93c23c57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable
reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] reserved
reserve setup_data: [mem 0x0000000000070000-0x0000000000087fff] usable
reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000093c15017] usable
reserve setup_data: [mem 0x0000000093c15018-0x0000000093c23c57] usable
reserve setup_data: [mem 0x0000000093c23c58-0x0000000093c24017] usable
reserve setup_data: [mem 0x0000000093c24018-0x0000000093c34057] usable
reserve setup_data: [mem 0x0000000093c34058-0x0000000094caffff] usable
reserve setup_data: [mem 0x0000000094cb0000-0x00000000960affff] reserved
reserve setup_data: [mem 0x00000000960b0000-0x000000009a6befff] usable
reserve setup_data: [mem 0x000000009a6bf000-0x000000009aebefff] reserved
reserve setup_data: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
reserve setup_data: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
reserve setup_data: [mem 0x000000009afff000-0x000000009affffff] usable
reserve setup_data: [mem 0x000000009b000000-0x000000009f9fffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
reserve setup_data: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x00000001df5fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by INSYDE Corp.
efi: ACPI=0x9affe000 ACPI 2.0=0x9affe014 SMBIOS=0x9aebef98
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000002000) (0MB)
efi: mem02: type=7, attr=0xf, range=[0x0000000000002000-0x000000000006f000) (0MB)
efi: mem03: type=0, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
efi: mem04: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
efi: mem05: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x000000000009f000) (0MB)
efi: mem06: type=0, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
efi: mem07: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem08: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002401000) (20MB)
efi: mem09: type=7, attr=0xf, range=[0x0000000002401000-0x000000003ec31000) (968MB)
efi: mem10: type=2, attr=0xf, range=[0x000000003ec31000-0x0000000040000000) (19MB)
efi: mem11: type=7, attr=0xf, range=[0x0000000040000000-0x000000006de42000) (734MB)
efi: mem12: type=2, attr=0xf, range=[0x000000006de42000-0x00000000930c0000) (594MB)
efi: mem13: type=4, attr=0xf, range=[0x00000000930c0000-0x00000000930e0000) (0MB)
efi: mem14: type=7, attr=0xf, range=[0x00000000930e0000-0x0000000093c15000) (11MB)
efi: mem15: type=2, attr=0xf, range=[0x0000000093c15000-0x0000000093d29000) (1MB)
efi: mem16: type=7, attr=0xf, range=[0x0000000093d29000-0x0000000093d2b000) (0MB)
efi: mem17: type=2, attr=0xf, range=[0x0000000093d2b000-0x0000000093d2c000) (0MB)
efi: mem18: type=7, attr=0xf, range=[0x0000000093d2c000-0x0000000093d2e000) (0MB)
efi: mem19: type=2, attr=0xf, range=[0x0000000093d2e000-0x0000000093d2f000) (0MB)
efi: mem20: type=7, attr=0xf, range=[0x0000000093d2f000-0x0000000093d30000) (0MB)
efi: mem21: type=2, attr=0xf, range=[0x0000000093d30000-0x0000000093d33000) (0MB)
efi: mem22: type=7, attr=0xf, range=[0x0000000093d33000-0x0000000093d36000) (0MB)
efi: mem23: type=2, attr=0xf, range=[0x0000000093d36000-0x0000000093e29000) (0MB)
efi: mem24: type=4, attr=0xf, range=[0x0000000093e29000-0x0000000094cb0000) (14MB)
efi: mem25: type=0, attr=0xf, range=[0x0000000094cb0000-0x00000000960b0000) (20MB)
efi: mem26: type=7, attr=0xf, range=[0x00000000960b0000-0x00000000960b2000) (0MB)
efi: mem27: type=2, attr=0xf, range=[0x00000000960b2000-0x00000000960b4000) (0MB)
efi: mem28: type=7, attr=0xf, range=[0x00000000960b4000-0x00000000960b7000) (0MB)
efi: mem29: type=2, attr=0xf, range=[0x00000000960b7000-0x00000000960b8000) (0MB)
efi: mem30: type=7, attr=0xf, range=[0x00000000960b8000-0x00000000960ba000) (0MB)
efi: mem31: type=2, attr=0xf, range=[0x00000000960ba000-0x00000000960bf000) (0MB)
efi: mem32: type=7, attr=0xf, range=[0x00000000960bf000-0x000000009618b000) (0MB)
efi: mem33: type=1, attr=0xf, range=[0x000000009618b000-0x00000000962bf000) (1MB)
efi: mem34: type=7, attr=0xf, range=[0x00000000962bf000-0x00000000970b5000) (13MB)
efi: mem35: type=4, attr=0xf, range=[0x00000000970b5000-0x0000000097f82000) (14MB)
efi: mem36: type=7, attr=0xf, range=[0x0000000097f82000-0x0000000097f89000) (0MB)
efi: mem37: type=4, attr=0xf, range=[0x0000000097f89000-0x0000000097f91000) (0MB)
efi: mem38: type=7, attr=0xf, range=[0x0000000097f91000-0x0000000097f92000) (0MB)
efi: mem39: type=4, attr=0xf, range=[0x0000000097f92000-0x0000000097fba000) (0MB)
efi: mem40: type=7, attr=0xf, range=[0x0000000097fba000-0x0000000097fbb000) (0MB)
efi: mem41: type=4, attr=0xf, range=[0x0000000097fbb000-0x00000000980fb000) (1MB)
efi: mem42: type=3, attr=0xf, range=[0x00000000980fb000-0x0000000098108000) (0MB)
efi: mem43: type=4, attr=0xf, range=[0x0000000098108000-0x0000000098113000) (0MB)
efi: mem44: type=3, attr=0xf, range=[0x0000000098113000-0x0000000098114000) (0MB)
efi: mem45: type=4, attr=0xf, range=[0x0000000098114000-0x0000000098115000) (0MB)
efi: mem46: type=7, attr=0xf, range=[0x0000000098115000-0x0000000098117000) (0MB)
efi: mem47: type=4, attr=0xf, range=[0x0000000098117000-0x000000009811b000) (0MB)
efi: mem48: type=3, attr=0xf, range=[0x000000009811b000-0x0000000098123000) (0MB)
efi: mem49: type=4, attr=0xf, range=[0x0000000098123000-0x0000000098126000) (0MB)
efi: mem50: type=7, attr=0xf, range=[0x0000000098126000-0x0000000098128000) (0MB)
efi: mem51: type=4, attr=0xf, range=[0x0000000098128000-0x0000000098154000) (0MB)
efi: mem52: type=7, attr=0xf, range=[0x0000000098154000-0x0000000098155000) (0MB)
efi: mem53: type=4, attr=0xf, range=[0x0000000098155000-0x0000000098156000) (0MB)
efi: mem54: type=3, attr=0xf, range=[0x0000000098156000-0x000000009815d000) (0MB)
efi: mem55: type=4, attr=0xf, range=[0x000000009815d000-0x0000000098164000) (0MB)
efi: mem56: type=3, attr=0xf, range=[0x0000000098164000-0x0000000098169000) (0MB)
efi: mem57: type=4, attr=0xf, range=[0x0000000098169000-0x000000009816c000) (0MB)
efi: mem58: type=3, attr=0xf, range=[0x000000009816c000-0x000000009816e000) (0MB)
efi: mem59: type=4, attr=0xf, range=[0x000000009816e000-0x0000000098172000) (0MB)
efi: mem60: type=3, attr=0xf, range=[0x0000000098172000-0x0000000098175000) (0MB)
efi: mem61: type=4, attr=0xf, range=[0x0000000098175000-0x0000000098178000) (0MB)
efi: mem62: type=3, attr=0xf, range=[0x0000000098178000-0x000000009817d000) (0MB)
efi: mem63: type=4, attr=0xf, range=[0x000000009817d000-0x000000009817e000) (0MB)
efi: mem64: type=3, attr=0xf, range=[0x000000009817e000-0x0000000098181000) (0MB)
efi: mem65: type=4, attr=0xf, range=[0x0000000098181000-0x0000000098182000) (0MB)
efi: mem66: type=3, attr=0xf, range=[0x0000000098182000-0x0000000098184000) (0MB)
efi: mem67: type=4, attr=0xf, range=[0x0000000098184000-0x0000000098185000) (0MB)
efi: mem68: type=3, attr=0xf, range=[0x0000000098185000-0x000000009818c000) (0MB)
efi: mem69: type=4, attr=0xf, range=[0x000000009818c000-0x000000009818d000) (0MB)
efi: mem70: type=3, attr=0xf, range=[0x000000009818d000-0x0000000098192000) (0MB)
efi: mem71: type=4, attr=0xf, range=[0x0000000098192000-0x0000000098194000) (0MB)
efi: mem72: type=3, attr=0xf, range=[0x0000000098194000-0x0000000098199000) (0MB)
efi: mem73: type=4, attr=0xf, range=[0x0000000098199000-0x000000009819b000) (0MB)
efi: mem74: type=7, attr=0xf, range=[0x000000009819b000-0x000000009819c000) (0MB)
efi: mem75: type=3, attr=0xf, range=[0x000000009819c000-0x000000009819e000) (0MB)
efi: mem76: type=4, attr=0xf, range=[0x000000009819e000-0x00000000981a1000) (0MB)
efi: mem77: type=7, attr=0xf, range=[0x00000000981a1000-0x00000000981a4000) (0MB)
efi: mem78: type=4, attr=0xf, range=[0x00000000981a4000-0x00000000981a7000) (0MB)
efi: mem79: type=7, attr=0xf, range=[0x00000000981a7000-0x00000000981aa000) (0MB)
efi: mem80: type=4, attr=0xf, range=[0x00000000981aa000-0x00000000981ae000) (0MB)
efi: mem81: type=7, attr=0xf, range=[0x00000000981ae000-0x00000000981b2000) (0MB)
efi: mem82: type=4, attr=0xf, range=[0x00000000981b2000-0x00000000981b3000) (0MB)
efi: mem83: type=3, attr=0xf, range=[0x00000000981b3000-0x00000000981c6000) (0MB)
efi: mem84: type=4, attr=0xf, range=[0x00000000981c6000-0x00000000981c9000) (0MB)
efi: mem85: type=3, attr=0xf, range=[0x00000000981c9000-0x00000000981d5000) (0MB)
efi: mem86: type=4, attr=0xf, range=[0x00000000981d5000-0x00000000981f4000) (0MB)
efi: mem87: type=3, attr=0xf, range=[0x00000000981f4000-0x0000000098238000) (0MB)
efi: mem88: type=4, attr=0xf, range=[0x0000000098238000-0x00000000983d6000) (1MB)
efi: mem89: type=3, attr=0xf, range=[0x00000000983d6000-0x00000000983da000) (0MB)
efi: mem90: type=4, attr=0xf, range=[0x00000000983da000-0x00000000983db000) (0MB)
efi: mem91: type=3, attr=0xf, range=[0x00000000983db000-0x00000000983dc000) (0MB)
efi: mem92: type=4, attr=0xf, range=[0x00000000983dc000-0x00000000983dd000) (0MB)
efi: mem93: type=3, attr=0xf, range=[0x00000000983dd000-0x00000000983df000) (0MB)
efi: mem94: type=4, attr=0xf, range=[0x00000000983df000-0x000000009a2bf000) (30MB)
efi: mem95: type=3, attr=0xf, range=[0x000000009a2bf000-0x000000009a6bf000) (4MB)
efi: mem96: type=5, attr=0x800000000000000f, range=[0x000000009a6bf000-0x000000009a8bf000) (2MB)
efi: mem97: type=6, attr=0x800000000000000f, range=[0x000000009a8bf000-0x000000009aabf000) (2MB)
efi: mem98: type=0, attr=0xf, range=[0x000000009aabf000-0x000000009aebf000) (4MB)
efi: mem99: type=10, attr=0xf, range=[0x000000009aebf000-0x000000009afbf000) (1MB)
efi: mem100: type=9, attr=0xf, range=[0x000000009afbf000-0x000000009afff000) (0MB)
efi: mem101: type=4, attr=0xf, range=[0x000000009afff000-0x000000009b000000) (0MB)
efi: mem102: type=7, attr=0xf, range=[0x0000000100000000-0x00000001df600000) (3574MB)
efi: mem103: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
efi: mem104: type=0, attr=0x0, range=[0x000000009b000000-0x000000009fa00000) (74MB)
efi: mem105: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
efi: mem106: type=0, attr=0x0, range=[0x00000000fe101000-0x00000000fe113000) (0MB)
efi: mem107: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb10000) (0MB)
efi: mem108: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem109: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fee01000) (1MB)
efi: mem110: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x0000000100000000) (4MB)
SMBIOS 2.7 present.
DMI: Acer Aspire E1-572G/EA50_HW , BIOS V2.10 10/07/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x1df600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7F80000000 write-back
1 base 0080000000 mask 7FE0000000 write-back
2 base 009B000000 mask 7FFF000000 uncachable
3 base 009C000000 mask 7FFC000000 uncachable
4 base 00FFC00000 mask 7FFFC00000 write-protect
5 base 0100000000 mask 7F00000000 write-back
6 base 01DF600000 mask 7FFFE00000 uncachable
7 base 01DF800000 mask 7FFF800000 uncachable
8 base 01E0000000 mask 7FE0000000 uncachable
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000082000] 82000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x1df400000-0x1df5fffff]
[mem 0x1df400000-0x1df5fffff] page 2M
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0x1dc000000-0x1df3fffff]
[mem 0x1dc000000-0x1df3fffff] page 2M
init_memory_mapping: [mem 0x180000000-0x1dbffffff]
[mem 0x180000000-0x1bfffffff] page 1G
[mem 0x1c0000000-0x1dbffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x94caffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x94bfffff] page 2M
[mem 0x94c00000-0x94caffff] page 4k
init_memory_mapping: [mem 0x960b0000-0x9a6befff]
[mem 0x960b0000-0x961fffff] page 4k
[mem 0x96200000-0x9a5fffff] page 2M
[mem 0x9a600000-0x9a6befff] page 4k
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x9afff000-0x9affffff]
[mem 0x9afff000-0x9affffff] page 4k
init_memory_mapping: [mem 0x100000000-0x17fffffff]
[mem 0x100000000-0x17fffffff] page 1G
RAMDISK: [mem 0x3ec31000-0x3fffafff]
ACPI: RSDP 000000009affe014 000024 (v02 ACRSYS)
ACPI: XSDT 000000009affe210 0000AC (v01 ACRSYS ACRPRDCT 00000001 01000013)
ACPI: FACP 000000009aff8000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20131115/tbfadt-202)
ACPI: DSDT 000000009afe4000 0102D4 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: FACS 000000009afb9000 000040
ACPI: UEFI 000000009affd000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: FPDT 000000009affb000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MSDM 000000009affa000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: ASF! 000000009aff9000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: HPET 000000009aff7000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: APIC 000000009aff6000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MCFG 000000009aff5000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 000000009afe1000 002028 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: BOOT 000000009afdf000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: ASPT 000000009afdd000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: DBGP 000000009afdc000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 000000009afdb000 000539 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 000000009afda000 000AD8 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 000000009afd6000 003B45 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 000000009afd3000 001DDA (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: BGRT 000000009afd5000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001df5fffff]
Initmem setup node 0 [mem 0x00000000-0x1df5fffff]
NODE_DATA [mem 0x1df5f8000-0x1df5fcfff]
[ffffea0000000000-ffffea00077fffff] PMD -> [ffff8801d8c00000-ffff8801debfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x1df5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0006efff]
node 0: [mem 0x00070000-0x00087fff]
node 0: [mem 0x00100000-0x94caffff]
node 0: [mem 0x960b0000-0x9a6befff]
node 0: [mem 0x9afff000-0x9affffff]
node 0: [mem 0x100000000-0x1df5fffff]
On node 0 totalpages: 1542214
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3974 pages, LIFO batch:0
DMA32 zone: 9739 pages used for memmap
DMA32 zone: 623296 pages, LIFO batch:31
Normal zone: 14296 pages used for memmap
Normal zone: 914944 pages, LIFO batch:31
tboot: non-0 tboot_addr but it is not of type E820_RESERVED
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
PM: Registered nosave memory: [mem 0x93c15000-0x93c15fff]
PM: Registered nosave memory: [mem 0x93c23000-0x93c23fff]
PM: Registered nosave memory: [mem 0x93c24000-0x93c24fff]
PM: Registered nosave memory: [mem 0x93c34000-0x93c34fff]
PM: Registered nosave memory: [mem 0x94cb0000-0x960affff]
PM: Registered nosave memory: [mem 0x9a6bf000-0x9aebefff]
PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff8801df200000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1518094
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 5896284K/6168856K available (7363K kernel code, 1142K rwdata, 3400K rodata, 1336K init, 1440K bss, 272572K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:1016 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 25165824 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.528 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.05 BogoMIPS (lpj=9578112)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28495 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (fam: 06, model: 45, stepping: 01)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19156.22 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 13:59:37, date: 02/17/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 000000009ae3dc18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: SSDT 000000009ae3d618 0005AA (v01 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20120913)
ACPI: SSDT 000000009ae3cd98 000119 (v01 PmRef ApCst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xc0710000-0xc0713fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xc0700000-0xc070ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xc0718000-0xc071801f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xc0714000-0xc0717fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xc071c000-0xc071c3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
pci 0000:00:1f.2: reg 0x24: [mem 0xc071b000-0xc071b7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xc0719000-0xc07190ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
pci 0000:01:00.0: [14e4:16b3] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xc0410000-0xc041ffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xc0420000-0xc042ffff 64bit pref]
pci 0000:01:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [14e4:16bc] type 00 class 0x080501
pci 0000:01:00.1: reg 0x10: [mem 0xc0400000-0xc040ffff 64bit pref]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xc0600000-0xc067ffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xc0600000-0xc06fffff]
pci 0000:03:00.0: [1002:6600] type 00 class 0x038000
pci 0000:03:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xc0500000-0xc053ffff 64bit]
pci 0000:03:00.0: reg 0x20: [io 0x3000-0x30ff]
pci 0000:03:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x22, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
e820: reserve RAM buffer [mem 0x93c15018-0x93ffffff]
e820: reserve RAM buffer [mem 0x93c24018-0x93ffffff]
e820: reserve RAM buffer [mem 0x94cb0000-0x97ffffff]
e820: reserve RAM buffer [mem 0x9a6bf000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
e820: reserve RAM buffer [mem 0x1df600000-0x1dfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:03: [io 0x0680-0x069f] has been reserved
system 00:03: [io 0xfd60-0xfd63] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0x1800-0x18fe] could not be reserved
system 00:03: [io 0x164e-0x164f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs ETD0500 PNP0f13 (active)
pnp 00:08: disabling [mem 0xffffffff-0x10000fffe] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfffff800-0xffffffff pref]
pnp 00:08: disabling [mem 0xffffffff-0x10000fffe disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0xffff0000-0xffffffff pref]
pnp 00:08: disabling [mem 0xffffffff-0x10000fffe disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0xfffe0000-0xffffffff pref]
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:08: [mem 0xff000000-0xff000fff] has been reserved
system 00:08: [mem 0xff010000-0xffffffff] could not be reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: [mem 0x9fa20000-0x9fa20fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xfffff800-0xffffffff pref]
pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fbfffff]
pci 0000:00:1c.3: BAR 15: assigned [mem 0x9fc00000-0x9fcfffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xc0430000-0xc04307ff pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fbfffff]
pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0x9fc00000-0x9fc0ffff pref]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xc0600000-0xc06fffff]
pci 0000:00:1c.3: bridge window [mem 0x9fc00000-0x9fcfffff pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xc0540000-0xc055ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff]
pci_bus 0000:01: resource 1 [mem 0x9fb00000-0x9fbfffff]
pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xc0600000-0xc06fffff]
pci_bus 0000:02: resource 2 [mem 0x9fc00000-0x9fcfffff pref]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff]
pci_bus 0000:03: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20264K (ffff88003ec31000 - ffff88003fffb000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x8f0c0000-0x930c0000] (64MB) mapped at [ffff88008f0c0000-ffff8800930bffff]
Simple Boot Flag at 0x44 set to 0x1
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x15
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x15
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x15
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x15
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1424181581.272:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 11693
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: device [8086:9c14] has invalid IRQ; check vendor BIOS
pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X
pcieport 0000:00:1c.3: device [8086:9c16] has invalid IRQ; check vendor BIOS
pcieport 0000:00:1c.3: irq 57 for MSI/MSI-X
pcieport 0000:00:1c.4: device [8086:9c18] has invalid IRQ; check vendor BIOS
pcieport 0000:00:1c.4: irq 58 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xb0000000, mapped to 0xffffc90010f00000, using 4128k, total 4128k
efifb: mode is 1366x768x32, linelength=5504, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 170x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
ACPI: AC Adapter [ACAD] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
[Firmware Bug]: battery: (dis)charge rate invalid.
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery present)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xc071c000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 59 for MSI/MSI-X
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 5e3c0f9ca6e36543535fa2bb5b709e84f16da7c7'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 3:74:989
machinecheck machinecheck2: hash matches
memory memory32: hash matches
rtc_cmos 00:04: setting system clock to 2015-02-17 13:59:42 UTC (1424181582)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)
Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)
systemd-udevd[124]: starting version 204
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.134 (Sep 16, 2013)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
[drm] Memory usable by graphics device = 2048M
checking generic (b0000000 408000) vs hw (b0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] radeon kernel modesetting enabled.
VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
radeon 0000:03:00.0: enabling device (0000 -> 0003)
i915 0000:00:02.0: irq 60 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM57786) rev 57766001] (PCI Express) MAC address 20:1a:06:6f:83:35
tg3 0000:01:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
sdhci-pci 0000:01:00.1: SDHCI controller found [14e4:16bc] (rev 1)
sdhci-pci 0000:01:00.1: dummy supplies not allowed
mmc0: no vqmmc regulator found
sdhci-pci 0000:01:00.1: dummy supplies not allowed
mmc0: no vmmc regulator found
mmc0: SDHCI controller on PCI [0000:01:00.1] using ADMA
[drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
usb 1-1: new high-speed USB device number 2 using ehci-pci
fbcon: inteldrmfb (fb0) is primary device
usb 1-1: New USB device found, idVendor=8087, idProduct=8000
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
usb 2-3: new high-speed USB device number 2 using xhci_hcd
usb 2-3: New USB device found, idVendor=13fe, idProduct=3600
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: Product: USB DISK 2.0
usb 2-3: Manufacturer:
usb 2-3: SerialNumber: 07AA18013A502DB1
usb-storage 2-3:1.0: USB Mass Storage device detected
usb-storage 2-3:1.0: Quirks match for vid 13fe pid 3600: 4000
scsi0 : usb-storage 2-3:1.0
usbcore: registered new interface driver usb-storage
usb 2-5: new full-speed USB device number 3 using xhci_hcd
usb 2-5: New USB device found, idVendor=04ca, idProduct=300b
usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x454f00)
tsc: Refined TSC clocksource calibration: 2394.456 MHz
psmouse serio1: elantech: Synaptics capabilities query result 0x79, 0x16, 0x0c.
usb 2-8: new high-speed USB device number 4 using xhci_hcd
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
usb 2-8: New USB device found, idVendor=1bcf, idProduct=2c54
usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-8: Product: HD WebCam
usb 2-8: Manufacturer: NC.21411.01X335121DDLM0006
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk
Switched to clocksource tsc
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.RP05.PEGP.DD02._BCL] (Node ffff8801d6159870), AE_NOT_FOUND (20131115/psparse-536)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2e/LNXVIDEO:00/input/input7
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:54: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
ahci 0000:00:1f.2: version 3.0
[drm] initializing kernel modesetting (OLAND 0x1002:0x6600 0x1025:0x0776).
[drm] register mmio base: 0xC0500000
[drm] register mmio size: 262144
vga_switcheroo: enabled
ahci 0000:00:1f.2: irq 61 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ATPX version 1, functions 0x00000033
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata1: SATA max UDMA/133 abar m2048@0xc071b000 port 0xc071b100 irq 61
ata2: SATA max UDMA/133 abar m2048@0xc071b000 port 0xc071b180 irq 61
ata3: DUMMY
ata4: DUMMY
ATOM BIOS: Acer/Compal
[drm] GPU not posted. posting now...
radeon 0000:03:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:03:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 2994836 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading OLAND Microcode
[drm] radeon/OLAND_mc2.bin: 31452 bytes
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
radeon 0000:03:00.0: WB enabled
radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88003fb30c00
radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88003fb30c04
radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88003fb30c08
radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88003fb30c0c
radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88003fb30c10
radeon 0000:03:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90021b35a18
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:03:00.0: irq 62 for MSI/MSI-X
radeon 0000:03:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 1 usecs
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: TOSHIBA MQ01ABD075, AX003J, max UDMA/100
ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD0 AX00 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] Enabling audio 1 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 1 usecs
sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6
sd 1:0:0:0: [sdb] Attached SCSI disk
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Internal thermal controller without fan control
[drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: MATSHITADVD-RAM UJ8D2Q, 1.10, max UDMA/133
ata2.00: configured for UDMA/133
scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8D2Q 1.10 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
[drm] radeon: dpm initialized
radeon 0000:03:00.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
[drm] fb mappable at 0xA1480000
[drm] vram apper at 0xA0000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
radeon 0000:03:00.0: fb1: radeondrmfb frame buffer device
[drm] Initialized radeon 2.36.0 20080528 for 0000:03:00.0 on minor 1
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
random: nonblocking pool is initialized
squashfs: version 4.0 (2009/01/31) Phillip Lougher
[drm] Disabling audio 0 support
[drm] Disabling audio 1 support
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[1041]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
init: cups main process (1114) killed by HUP signal
init: cups main process ended, respawning
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
usbcore: registered new interface driver btusb
cfg80211: Calling CRDA to update world regulatory domain
mei_me 0000:00:16.0: irq 63 for MSI/MSI-X
device-mapper: multipath: version 1.6.0 loaded
Linux video capture interface: v2.00
HDA driver get symbol successfully from i915 module
snd_hda_intel 0000:00:1b.0: irq 64 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 65 for MSI/MSI-X
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
SKU: Nid=0x1d sku_cfg=0x40589b2d
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000008
SKU: customization=0x0000009b
SKU: external_amp=0x5
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0x1b
realtek: No valid SSID, checking pincfg 0x40589b2d for NID 0x1d
realtek: Enabling init ASM_ID=0x9b2d CODEC_ID=10ec0282
uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c54)
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input13
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Button: 0x801
acer_wmi: Brightness must be controlled by acpi video driver
init: failsafe main process (1286) killed by TERM signal
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
input: Acer WMI hotkeys as /devices/virtual/input/input14
input: Acer BMA150 accelerometer as /devices/virtual/input/input15
ath: phy0: WB335 1-ANT card detected
ath: phy0: Enable LNA combining
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90022180000, irq=19
intel_rapl: domain uncore energy ctr 11802:11802 not working, skip
tg3 0000:01:00.0: irq 66 for MSI/MSI-X
tg3 0000:01:00.0: irq 67 for MSI/MSI-X
tg3 0000:01:00.0: irq 68 for MSI/MSI-X
tg3 0000:01:00.0: irq 69 for MSI/MSI-X
tg3 0000:01:00.0: irq 70 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: alsa-restore main process (1645) terminated with status 99
[drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000478000).
radeon 0000:03:00.0: WB enabled
radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88003fb30c00
radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88003fb30c04
radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88003fb30c08
radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88003fb30c0c
radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88003fb30c10
radeon 0000:03:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90021b35a18
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 1 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] Enabling audio 1 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (2081) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
[drm] Disabling audio 0 support
[drm] Disabling audio 1 support
systemd-hostnamed[3897]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
wlan0: authenticate with a4:b1:e9:ed:8b:e4
wlan0: send auth to a4:b1:e9:ed:8b:e4 (try 1/3)
wlan0: authenticated
wlan0: associate with a4:b1:e9:ed:8b:e4 (try 1/3)
wlan0: RX AssocResp from a4:b1:e9:ed:8b:e4 (capab=0x411 status=0 aid=6)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticating from a4:b1:e9:ed:8b:e4 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
[drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000478000).
radeon 0000:03:00.0: WB enabled
radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88003fb30c00
radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88003fb30c04
radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88003fb30c08
radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88003fb30c0c
radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88003fb30c10
radeon 0000:03:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90021b35a18
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 1 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] Enabling audio 1 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Stopping disk
[drm] Disabling audio 0 support
[drm] Disabling audio 1 support
PM: suspend of devices complete after 1086.691 msecs
PM: late suspend of devices complete after 14.121 msecs
tg3 0000:01:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 80.186 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 175.476 msecs
PM: early resume of devices complete after 0.089 msecs
mei_me 0000:00:16.0: irq 63 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 64 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 65 for MSI/MSI-X
tg3 0000:01:00.0: System wakeup disabled by ACPI
[drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000478000).
radeon 0000:03:00.0: WB enabled
radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88003fb30c00
radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88003fb30c04
radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88003fb30c08
radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88003fb30c0c
radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88003fb30c10
radeon 0000:03:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90021b35a18
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:06 failed to resume: error -19
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 0 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 1 usecs
usb 2-5: reset full-speed USB device number 3 using xhci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003f5f2a80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003f5f2b00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003f5f2ac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801d5dcde40
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801d5dcde00
ata2.00: configured for UDMA/133
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] Enabling audio 1 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
usb 2-3: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801d4fbab00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801d4fbab40
[drm] ib test on ring 5 succeeded
usb 2-8: reset high-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003f53f780
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/100
sd 1:0:0:0: [sdb] Starting disk
PM: resume of devices complete after 2610.364 msecs
PM: Finishing wakeup.
tg3 0000:01:00.0: no hotplug settings from platform
sdhci-pci 0000:01:00.1: no hotplug settings from platform
pci_bus 0000:01: Allocating resources
pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci_bus 0000:02: Allocating resources
pcieport 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci_bus 0000:03: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pcieport 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pcieport 0000:00:1c.3: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
i915 0000:00:02.0: no hotplug settings from platform
i915 0000:00:02.0: using default PCI settings
snd_hda_intel 0000:00:03.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: using default PCI settings
mei_me 0000:00:16.0: no hotplug settings from platform
mei_me 0000:00:16.0: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
tg3 0000:01:00.0: no hotplug settings from platform
sdhci-pci 0000:01:00.1: no hotplug settings from platform
pcieport 0000:00:1c.3: no hotplug settings from platform
ath9k 0000:02:00.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
radeon 0000:03:00.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
pci 0000:00:1f.3: no hotplug settings from platform
pci 0000:00:1f.3: using default PCI settings
pci_bus 0000:01: Allocating resources
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
i915 0000:00:02.0: no hotplug settings from platform
i915 0000:00:02.0: using default PCI settings
snd_hda_intel 0000:00:03.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: using default PCI settings
mei_me 0000:00:16.0: no hotplug settings from platform
mei_me 0000:00:16.0: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
tg3 0000:01:00.0: no hotplug settings from platform
sdhci-pci 0000:01:00.1: no hotplug settings from platform
pcieport 0000:00:1c.3: no hotplug settings from platform
ath9k 0000:02:00.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
radeon 0000:03:00.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
pci 0000:00:1f.3: no hotplug settings from platform
pci 0000:00:1f.3: using default PCI settings
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
tg3 0000:01:00.0: irq 66 for MSI/MSI-X
tg3 0000:01:00.0: irq 67 for MSI/MSI-X
tg3 0000:01:00.0: irq 68 for MSI/MSI-X
tg3 0000:01:00.0: irq 69 for MSI/MSI-X
tg3 0000:01:00.0: irq 70 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:01:00.0: irq 66 for MSI/MSI-X
tg3 0000:01:00.0: irq 67 for MSI/MSI-X
tg3 0000:01:00.0: irq 68 for MSI/MSI-X
tg3 0000:01:00.0: irq 69 for MSI/MSI-X
tg3 0000:01:00.0: irq 70 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with a4:b1:e9:ed:8b:e4
wlan0: send auth to a4:b1:e9:ed:8b:e4 (try 1/3)
wlan0: authenticated
wlan0: associate with a4:b1:e9:ed:8b:e4 (try 1/3)
wlan0: RX AssocResp from a4:b1:e9:ed:8b:e4 (capab=0x411 status=0 aid=6)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[drm] Disabling audio 0 support
[drm] Disabling audio 1 support
mce: [Hardware Error]: Machine check events logged
wlan0: deauthenticating from a4:b1:e9:ed:8b:e4 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
[drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000478000).
radeon 0000:03:00.0: WB enabled
radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88003fb30c00
radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88003fb30c04
radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88003fb30c08
radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88003fb30c0c
radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88003fb30c10
radeon 0000:03:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90021b35a18
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 1 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] Enabling audio 1 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Stopping disk
[drm] Disabling audio 0 support
[drm] Disabling audio 1 support
PM: suspend of devices complete after 1130.250 msecs
PM: late suspend of devices complete after 14.754 msecs
tg3 0000:01:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 80.159 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
Broke affinity for irq 23
Broke affinity for irq 61
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 174.177 msecs
PM: early resume of devices complete after 0.088 msecs
snd_hda_intel 0000:00:03.0: irq 63 for MSI/MSI-X
mei_me 0000:00:16.0: irq 64 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 65 for MSI/MSI-X
tg3 0000:01:00.0: System wakeup disabled by ACPI
[drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000478000).
radeon 0000:03:00.0: WB enabled
radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88003fb30c00
radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88003fb30c04
radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88003fb30c08
radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88003fb30c0c
radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88003fb30c10
radeon 0000:03:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90021b35a18
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:06 failed to resume: error -19
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 1 usecs
usb 2-3: reset high-speed USB device number 2 using xhci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/133
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801d4fbab00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801d4fbab40
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] Enabling audio 1 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
usb 2-5: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003f5f2a80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003f5f2b00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003f5f2ac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801d5dcde40
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801d5dcde00
[drm] ib test on ring 5 succeeded
usb 2-8: reset high-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003f53f780
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/100
sd 1:0:0:0: [sdb] Starting disk
PM: resume of devices complete after 2610.026 msecs
PM: Finishing wakeup.
tg3 0000:01:00.0: no hotplug settings from platform
sdhci-pci 0000:01:00.1: no hotplug settings from platform
pci_bus 0000:01: Allocating resources
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
i915 0000:00:02.0: no hotplug settings from platform
i915 0000:00:02.0: using default PCI settings
snd_hda_intel 0000:00:03.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: using default PCI settings
mei_me 0000:00:16.0: no hotplug settings from platform
mei_me 0000:00:16.0: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
tg3 0000:01:00.0: no hotplug settings from platform
sdhci-pci 0000:01:00.1: no hotplug settings from platform
pcieport 0000:00:1c.3: no hotplug settings from platform
ath9k 0000:02:00.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
radeon 0000:03:00.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
pci 0000:00:1f.3: no hotplug settings from platform
pci 0000:00:1f.3: using default PCI settings
pci_bus 0000:01: Allocating resources
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
i915 0000:00:02.0: no hotplug settings from platform
i915 0000:00:02.0: using default PCI settings
snd_hda_intel 0000:00:03.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: using default PCI settings
mei_me 0000:00:16.0: no hotplug settings from platform
mei_me 0000:00:16.0: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
tg3 0000:01:00.0: no hotplug settings from platform
sdhci-pci 0000:01:00.1: no hotplug settings from platform
pcieport 0000:00:1c.3: no hotplug settings from platform
ath9k 0000:02:00.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
radeon 0000:03:00.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
pci 0000:00:1f.3: no hotplug settings from platform
pci 0000:00:1f.3: using default PCI settings
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
tg3 0000:01:00.0: irq 66 for MSI/MSI-X
tg3 0000:01:00.0: irq 67 for MSI/MSI-X
tg3 0000:01:00.0: irq 68 for MSI/MSI-X
tg3 0000:01:00.0: irq 69 for MSI/MSI-X
tg3 0000:01:00.0: irq 70 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:01:00.0: irq 66 for MSI/MSI-X
tg3 0000:01:00.0: irq 67 for MSI/MSI-X
tg3 0000:01:00.0: irq 68 for MSI/MSI-X
tg3 0000:01:00.0: irq 69 for MSI/MSI-X
tg3 0000:01:00.0: irq 70 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with a4:b1:e9:ed:8b:e4
wlan0: send auth to a4:b1:e9:ed:8b:e4 (try 1/3)
wlan0: authenticated
wlan0: associate with a4:b1:e9:ed:8b:e4 (try 1/3)
wlan0: RX AssocResp from a4:b1:e9:ed:8b:e4 (capab=0x411 status=0 aid=6)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[drm] Disabling audio 0 support
[drm] Disabling audio 1 support
mce: [Hardware Error]: Machine check events logged
ath: phy0: Failed to stop TX DMA, queues=0x004!
ath: phy0: Failed to stop TX DMA, queues=0x001!
systemd-hostnamed[14732]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
ath: phy0: Failed to stop TX DMA, queues=0x005!
ath: phy0: Failed to stop TX DMA, queues=0x001!