dmesg - FFTW
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.18.6-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf7affff] usable
BIOS-e820: [mem 0x00000000bf7b0000-0x00000000bf7c53ff] reserved
BIOS-e820: [mem 0x00000000bf7c5400-0x00000000bf7e7fb7] ACPI NVS
BIOS-e820: [mem 0x00000000bf7e7fb8-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed20000-0x00000000fed99fff] reserved
BIOS-e820: [mem 0x00000000feda0000-0x00000000fedbffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Hewlett-Packard HP 550/3618, BIOS 68MVU Ver. F.02 08/20/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0xbf7b0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BF800000 mask FFF800000 uncachable
3 base 0FEDA0000 mask FFFFE0000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01b36000, 0x01b36fff] PGTABLE
BRK [0x01b37000, 0x01b37fff] PGTABLE
BRK [0x01b38000, 0x01b38fff] PGTABLE
init_memory_mapping: [mem 0xbf400000-0xbf5fffff]
[mem 0xbf400000-0xbf5fffff] page 2M
BRK [0x01b39000, 0x01b39fff] PGTABLE
init_memory_mapping: [mem 0xbc000000-0xbf3fffff]
[mem 0xbc000000-0xbf3fffff] page 2M
init_memory_mapping: [mem 0x80000000-0xbbffffff]
[mem 0x80000000-0xbbffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7fffffff] page 2M
init_memory_mapping: [mem 0xbf600000-0xbf7affff]
[mem 0xbf600000-0xbf7affff] page 4k
BRK [0x01b3a000, 0x01b3afff] PGTABLE
RAMDISK: [mem 0x3798c000-0x37cbdfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FC600 000024 (v02 HP )
ACPI: XSDT 0x00000000BF7C81C8 00007C (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: FACP 0x00000000BF7C8084 0000F4 (v04 HP 3618 00000003 HP 00000001)
ACPI: DSDT 0x00000000BF7C84CC 012BC7 (v01 HP nc6xxxs 00010000 MSFT 03000001)
ACPI: FACS 0x00000000BF7E7D80 000040
ACPI: SLIC 0x00000000BF7C8244 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: HPET 0x00000000BF7C83BC 000038 (v01 HP 3618 00000001 HP 00000001)
ACPI: APIC 0x00000000BF7C83F4 000068 (v01 HP 3618 00000001 HP 00000001)
ACPI: MCFG 0x00000000BF7C845C 00003C (v01 HP 3618 00000001 HP 00000001)
ACPI: TCPA 0x00000000BF7C8498 000032 (v02 HP 3618 00000001 HP 00000001)
ACPI: SSDT 0x00000000BF7DB093 000328 (v01 HP HPQSAT 00000001 MSFT 03000001)
ACPI: SSDT 0x00000000BF7DB3BB 00017D (v01 HP HPQMRM 00000001 MSFT 03000001)
ACPI: SSDT 0x00000000BF7DBEBC 00025F (v01 HP Cpu0Tst 00003000 INTL 20060317)
ACPI: SSDT 0x00000000BF7DC11B 0000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317)
ACPI: SSDT 0x00000000BF7DC1C1 0004D7 (v01 HP CpuPm 00003000 INTL 20060317)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000000bf7affff]
NODE_DATA(0) allocated [mem 0xbf7ac000-0xbf7affff]
[ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bbc00000-ffff8800bebfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xbf7affff]
Initmem setup node 0 [mem 0x00001000-0xbf7affff]
On node 0 totalpages: 784206
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 12191 pages used for memmap
DMA32 zone: 780208 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xbf800000-0xbfffffff
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff8800bf200000 s82880 r8192 d31808 u1048576
pcpu-alloc: s82880 r8192 d31808 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 771930
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3072304K/3136824K available (5481K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 64520K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
Dump stacks of tasks blocking RCU-preempt GP.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:8448 nr_irqs:440 0
Console: colour dummy device 80x25
console [tty0] enabled
allocated 12582912 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1396.464 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2794.30 BogoMIPS (lpj=4654880)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140926
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
ftrace: allocating 20931 entries in 82 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T5270 @ 1.40GHz (fam: 06, model: 0f, stepping: 0d)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
CPU1: Thermal monitoring handled by SMI
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (5588.60 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbf7c5400-0xbf7e7fb7] (142264 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 8:33:56, date: 02/15/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8800BA501800 00023D (v01 HP Cpu0Ist 00003000 INTL 20060317)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8800BAA9E000 0005FA (v01 HP Cpu0Cst 00003001 INTL 20060317)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8800BA532400 0000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8800BA505780 000085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [C272] (on)
ACPI: Power Resource [C27F] (on)
ACPI: Power Resource [C29B] (on)
ACPI: Power Resource [C1C6] (off)
ACPI: Power Resource [C3B2] (off)
ACPI: Power Resource [C3B3] (off)
ACPI: Power Resource [C3B4] (off)
ACPI: Power Resource [C3B5] (off)
ACPI: Power Resource [C3B6] (off)
ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xbf800000-0xfedfffff]
pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000dffff]
pci 0000:00:00.0: [8086:2a10] type 00 class 0x060000
pci 0000:00:02.0: [8086:2a12] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe4400000-0xe44fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4000-0x4007]
pci 0000:00:02.1: [8086:2a13] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0xe4500000-0xe45fffff 64bit]
pci 0000:00:19.0: [8086:10c4] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xe4600000-0xe461ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xe4620000-0xe4620fff]
pci 0000:00:19.0: reg 0x18: [io 0x4020-0x403f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x4040-0x405f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xe4621000-0xe46213ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xe4624000-0xe4627fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x4060-0x407f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x4080-0x409f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x40a0-0x40bf]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xe4628000-0xe46283ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io 0x1000-0x107f]: address conflict with ACPI CPU throttle [io 0x1010-0x1015]
pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x20: [io 0x40c0-0x40cf]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x13f0-0x13f7]
pci 0000:00:1f.2: reg 0x14: [io 0x15f4-0x15f7]
pci 0000:00:1f.2: reg 0x18: [io 0x1370-0x1377]
pci 0000:00:1f.2: reg 0x1c: [io 0x1574-0x1577]
pci 0000:00:1f.2: reg 0x20: [io 0x4100-0x411f]
pci 0000:00:1f.2: reg 0x24: [mem 0xe4629000-0xe46297ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1c.0: PCI bridge to [bus 08]
pci 0000:10:00.0: [8086:4229] type 00 class 0x028000
pci 0000:10:00.0: reg 0x10: [mem 0xe4000000-0xe4001fff 64bit]
pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
pci 0000:10:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 10]
pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff]
acpiphp: Slot [1] registered
pci 0000:00:1c.4: PCI bridge to [bus 28]
pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe3ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xbf800000-0xfedfffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000dffff] (subtractive decode)
ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
ACPI: PCI Interrupt Link [C12F] (IRQs *10 11)
ACPI: PCI Interrupt Link [C130] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C131] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C141] (IRQs *10 11)
ACPI: PCI Interrupt Link [C142] (IRQs *10 11)
ACPI: PCI Interrupt Link [C143] (IRQs 10 11) *5
ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20140926/pci_link-178)
ACPI: Enabled 8 GPEs in block 00 to 1F
ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf7b0000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbf7fffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs SYN0159 SYN0100 SYN0002 PNP0f13 (active)
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x0800-0x080f] has been reserved
system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:04: [mem 0xfff00000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x1000-0x107f] could not be reserved
system 00:05: [io 0x1100-0x113f] has been reserved
system 00:05: [io 0x1200-0x121f] has been reserved
system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:05: [mem 0xfec00000-0xfec000ff] could not be reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed99fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0x000cee00-0x000cffff] has been reserved
system 00:06: [mem 0x000d2000-0x000d3fff] has been reserved
system 00:06: [mem 0xfeda0000-0xfedbffff] has been reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 10] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 10] add_size 200000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 28] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:00:1c.0: PCI bridge to [bus 08]
pci 0000:00:1c.1: PCI bridge to [bus 10]
pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff]
pci 0000:00:1c.1: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 28]
pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe3ffffff]
pci 0000:00:1c.4: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 02]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xbf800000-0xfedfffff]
pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff]
pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000dffff]
pci_bus 0000:10: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:10: resource 1 [mem 0xe4000000-0xe40fffff]
pci_bus 0000:10: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
pci_bus 0000:28: resource 0 [io 0x2000-0x3fff]
pci_bus 0000:28: resource 1 [mem 0xe0000000-0xe3ffffff]
pci_bus 0000:28: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 7 [mem 0xbf800000-0xfedfffff]
pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff]
pci_bus 0000:02: resource 9 [mem 0x000d4000-0x000dffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 3272K (ffff88003798c000 - ffff880037cbe000)
microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3
microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 512 (order: 3, 32768 bytes)
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 6007
Key type big_key registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004780000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 15
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
registered taskstats version 1
Magic number: 3:976:573
rtc_cmos 00:01: setting system clock to 2015-02-15 08:33:57 UTC (1423989237)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
random: systemd-tmpfile urandom read with 3 bits of entropy available
i8042: PNP: PS/2 Controller [PNP0303:C298,PNP0f13:C299] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
SCSI subsystem initialized
libata version 3.00 loaded.
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xe4621000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 20, io mem 0xe4628000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004040
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004080
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ata_piix 0000:00:1f.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc
scsi host2: ahci
ata2: port disabled--ignoring
scsi host3: ahci
scsi host4: ahci
ata3: SATA max UDMA/133 abar m2048@0xe4629000 port 0xe4629100 irq 27
ata4: SATA max UDMA/133 abar m2048@0xe4629000 port 0xe4629180 irq 27
ata5: SATA max UDMA/133 abar m2048@0xe4629000 port 0xe4629200 irq 27
ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T40L, KC07, max MWDMA2
ata1.00: configured for MWDMA2
scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T40L KC07 PQ: 0 ANSI: 5
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ATA-8: TOSHIBA MK1252GSX, LV011C, max UDMA/100
ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1252GS 1C PQ: 0 ANSI: 5
usb 3-1: new full-speed USB device number 2 using uhci_hcd
usb 5-1: new full-speed USB device number 2 using uhci_hcd
ata4: SATA link down (SStatus 0 SControl 300)
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/0003:045E:07A5.0001/input/input5
hid-generic 0003:045E:07A5.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:00:1d.1-1/input0
input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.1/0003:045E:07A5.0002/input/input6
hid-generic 0003:045E:07A5.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:00:1d.1-1/input1
input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.2/0003:045E:07A5.0003/input/input7
hid-generic 0003:045E:07A5.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:00:1d.1-1/input2
tsc: Refined TSC clocksource calibration: 1396.499 MHz
ata5: SATA link down (SStatus 0 SControl 300)
sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
Switched to clocksource tsc
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
EXT4-fs (sda3): re-mounted. Opts: data=ordered
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
Switched to clocksource hpet
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8
ACPI: Sleep Button [C2B4]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input9
ACPI: Lid Switch [C154]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input10
ACPI: Power Button [PWRF]
ACPI: AC Adapter [C23A] (on-line)
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ACPI: Battery Slot [C23B] (battery present)
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
PTP clock support registered
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ3] (22 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ4] (21 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [TZ5] (28 C)
thermal LNXTHERM:03: registered as thermal_zone3
ACPI: Thermal Zone [TZ0] (30 C)
agpgart-intel 0000:00:00.0: Intel 965GME/GLE Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
thermal LNXTHERM:04: registered as thermal_zone4
ACPI: Thermal Zone [TZ1] (28 C)
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:64:4f:2b:e7
e1000e 0000:00:19.0 eth0: Intel(R) PRO/10/100 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 7, PBA No: FFFFFF-0FF
ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102f conflicts with OpRegion 0x0000000000001000-0x0000000000001042 (\_SB_.C003.C004.C0D3) (20140926/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001130-0x000000000000113f conflicts with OpRegion 0x0000000000001100-0x000000000000113b (\_SB_.C003.C004.C0E5) (20140926/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001100-0x000000000000112f conflicts with OpRegion 0x0000000000001100-0x000000000000113b (\_SB_.C003.C004.C0E5) (20140926/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
cfg80211: Calling CRDA to update world regulatory domain
[drm] Memory usable by graphics device = 512M
checking generic (d0000000 300000) vs hw (d0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
i915 0000:00:02.0: irq 29 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initialized overlay support
ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000004) is beyond end of object (length 0x4) (20140926/exoparg2-420)
ACPI Error: Method parse/execution failed [\_SB_.C003.C099._DOD] (Node ffff8800bec29960), AE_AML_PACKAGE_LIMIT (20140926/psparse-536)
ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20140926/video-1220)
ACPI: Video Device [C099] (multi-head: yes rom: no post: no)
acpi device:01: registered as cooling_device7
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 30 for MSI/MSI-X
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
iwl4965: Copyright(c) 2003-2011 Intel Corporation
iwl4965 0000:10:00.0: can't disable ASPM; OS doesn't have ASPM control
iwl4965 0000:10:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
iwl4965 0000:10:00.0: device EEPROM VER=0x36, CALIB=0x5
iwl4965 0000:10:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
iwl4965 0000:10:00.0: irq 31 for MSI/MSI-X
input: PC Speaker as /devices/platform/pcspkr/input/input16
iwl4965 0000:10:00.0: loaded firmware version 228.61.2.24
[drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
ppdev: user-space parallel port driver
e1000e 0000:00:19.0 enp0s25: renamed from eth0
sound hdaudioC0D0: autoconfig: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x6/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Mic=0x8
sound hdaudioC0D0: Internal Mic=0x18
sound hdaudioC0D0: Line=0x9
input: HP WMI hotkeys as /devices/virtual/input/input17
iTCO_vendor_support: vendor-support=0
[drm] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input18
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
iwl4965 0000:10:00.0 wlp16s0: renamed from wlan0
systemd-journald[145]: Received request to flush runtime journal from PID 1
mousedev: PS/2 mouse device common for all mice
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
cfg80211: Calling CRDA to update world regulatory domain
wlp16s0: authenticate with 00:26:44:6e:64:91
wlp16s0: send auth to 00:26:44:6e:64:91 (try 1/3)
wlp16s0: authenticated
wlp16s0: waiting for beacon from 00:26:44:6e:64:91
wlp16s0: associate with 00:26:44:6e:64:91 (try 1/3)
wlp16s0: RX AssocResp from 00:26:44:6e:64:91 (capab=0x431 status=0 aid=1)
wlp16s0: associated
perf interrupt took too long (2501 > 2495), lowering kernel.perf_event_max_sample_rate to 50100
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
perf interrupt took too long (4993 > 4960), lowering kernel.perf_event_max_sample_rate to 25200
cfg80211: Calling CRDA to update world regulatory domain