dmesg - 1
Booting Linux on physical CPU 0xf00
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.18.5-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #225 SMP PREEMPT Fri Jan 30 18:53:55 GMT 2015
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Raspberry Pi 2 Model B
Truncating RAM at 0x00000000-0x3b000000 to -0x2f800000
cma: Reserved 8 MiB at 0x2f000000
Memory policy: Data cache writealloc
On node 0 totalpages: 194560
free_area_init_node: node 0, pgdat c0820440, node_mem_map eea03000
Normal zone: 1520 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 194560 pages, LIFO batch:31
[bcm2709_smp_init_cpus] enter (8620->f3003010)
[bcm2709_smp_init_cpus] ncores=4
PERCPU: Embedded 11 pages/cpu @ee9cd000 s12864 r8192 d24000 u45056
pcpu-alloc: s12864 r8192 d24000 u45056 alloc=11*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 193040
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 753796K/778240K available (5785K kernel code, 377K rwdata, 1760K rodata, 396K init, 771K bss, 24444K reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc076670c (7546 kB)
.init : 0xc0767000 - 0xc07ca000 ( 396 kB)
.data : 0xc07ca000 - 0xc08287ac ( 378 kB)
.bss : 0xc08287ac - 0xc08e9694 ( 772 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:480
Architected cp15 timer(s) running at 19.20MHz (virt).
sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
Switching to timer-based delay loop, resolution 52ns
Console: colour dummy device 80x30
console [tty1] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Testing write buffer coherency: ok
ftrace: allocating 19967 entries in 59 pages
CPU0: update cpu_capacity 1024
CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[bcm2709_smp_prepare_cpus] enter
Setting up static identity map for 0x5366f8 - 0x536750
[bcm2709_boot_secondary] cpu:1 started (0) 17
CPU1: Booted secondary processor
[bcm2709_secondary_init] enter cpu:1
CPU1: update cpu_capacity 1024
CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[bcm2709_boot_secondary] cpu:2 started (0) 18
CPU2: Booted secondary processor
[bcm2709_secondary_init] enter cpu:2
CPU2: update cpu_capacity 1024
CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[bcm2709_boot_secondary] cpu:3 started (0) 17
CPU3: Booted secondary processor
[bcm2709_secondary_init] enter cpu:3
CPU3: update cpu_capacity 1024
CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
Brought up 4 CPUs
SMP: Total of 4 processors activated (153.60 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 4096 KiB pool for atomic coherent allocations
cpuidle: using governor ladder
cpuidle: using governor menu
bcm2709.uart_clock = 3000000
No ATAGs?
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
mailbox: Broadcom VideoCore Mailbox driver
bcm2708_vcio: mailbox at f300b880
bcm_power: Broadcom power driver
bcm_power_open() -> 0
bcm_power_request(0, 8)
bcm_mailbox_read -> 00000080, 0
bcm_power_request -> 0
dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3
console [ttyAMA0] enabled
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switched to clocksource arch_sys_counter
FS-Cache: Loaded
CacheFiles: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
bcm2708_dma: DMA manager at f3007000
vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1.299:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
msgmni has been set to 1488
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
BCM2708FB: allocated DMA memory ef400000
BCM2708FB: allocated DMA channel 0 @ f3007000
Console: switching to colour frame buffer device 240x67
bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
uart-pl011 dev:f1: no DMA platform data
vc-cma: Videocore CMA driver
vc-cma: vc_cma_base = 0x00000000
vc-cma: vc_cma_size = 0x00000000 (0 MiB)
vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
brd: module loaded
loop: module loaded
vchiq: vchiq_init_state: slot_zero = 0xef000000, is_master = 0
Loading iSCSI transport class v2.0-870.
usbcore: registered new interface driver smsc95xx
dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Core Release: 2.80a
Setting default values for core params
Finished setting default values for core params
Using Buffer DMA mode
Periodic Transfer Interrupt Enhancement - disabled
Multiprocessor Interrupt Enhancement - disabled
OTG VER PARAM: 0, OTG VER FLAG: 0
Dedicated Tx FIFOs mode
WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xef414000 dma = 0xef414000 len=9024
FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
dwc_otg: Microframe scheduler enabled
WARN::hcd_init_fiq:412: FIQ on core 1 at 0xc03e3cb8
WARN::hcd_init_fiq:413: FIQ ASM at 0xc03e4014 length 36
WARN::hcd_init_fiq:438: MPHI regs_base at 0xf0006000
dwc_otg bcm2708_usb: DWC OTG Controller
dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
Init: Port Power? op_state=1
Init: Power Port (0)
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: DWC OTG Controller
usb usb1: Manufacturer: Linux 3.18.5-v7+ dwc_otg_hcd
usb usb1: SerialNumber: bcm2708_usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
dwc_otg: FIQ enabled
dwc_otg: NAK holdoff enabled
dwc_otg: FIQ split-transaction FSM enabled
Module dwc_common_port init
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
bcm2835-cpufreq: min=600000 max=900000
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
DMA channels allocated for the MMC driver
Load BCM2835 MMC driver
sdhci-pltfm: SDHCI platform and OF driver helper
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Key type dns_resolver registered
Indeed it is in host mode hprt0 = 00021501
Registering SWP/SWPB emulation handler
registered taskstats version 1
vc-sm: Videocore shared memory driver
[vc_sm_connected_init]: start
[vc_sm_connected_init]: end - returning 0
Waiting for root device /dev/sda3...
mmc0: host does not support reading read-only switch, assuming write-enable
mmc0: new high speed SDHC card at address 0007
mmcblk0: mmc0:0007 SD16G 14.4 GiB
mmcblk0: p1 p2
usb 1-1: new high-speed USB device number 2 using dwc_otg
Indeed it is in host mode hprt0 = 00001101
usb 1-1: New USB device found, idVendor=0424, idProduct=9514
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 5 ports detected
usb 1-1.1: new high-speed USB device number 3 using dwc_otg
usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
smsc95xx v1.0.4
smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:44:3c:89
usb 1-1.2: new high-speed USB device number 4 using dwc_otg
usb 1-1.2: New USB device found, idVendor=05e3, idProduct=0606
usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.2: Product: USB2.0 Hub
hub 1-1.2:1.0: USB hub found
hub 1-1.2:1.0: 4 ports detected
usb 1-1.4: new full-speed USB device number 5 using dwc_otg
usb 1-1.4: New USB device found, idVendor=046d, idProduct=c52b
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: USB Receiver
usb 1-1.4: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C52B.0001/input/input0
hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-bcm2708_usb-1.4/input0
usb 1-1.2.3: new high-speed USB device number 6 using dwc_otg
input: Logitech USB Receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0002/input/input1
hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-bcm2708_usb-1.4/input1
hid-generic 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-bcm2708_usb-1.4/input2
usb 1-1.2.3: New USB device found, idVendor=14cd, idProduct=6116
usb 1-1.2.3: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-1.2.3: Product: USB Mass Storage Device
usb 1-1.2.3: Manufacturer: Generic
usb 1-1.2.3: SerialNumber: 116AC2101219
usb-storage 1-1.2.3:1.0: USB Mass Storage device detected
scsi host0: usb-storage 1-1.2.3:1.0
scsi 0:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0
sd 0:0:0:0: [sda] 312581806 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda3): INFO: recovery required on readonly filesystem
EXT4-fs (sda3): write access will be enabled during recovery
random: nonblocking pool is initialized
EXT4-fs (sda3): recovery complete
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
devtmpfs: mounted
Freeing unused kernel memory: 396K (c0767000 - c07ca000)
init: plymouth-upstart-bridge main process (65) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: ureadahead main process (67) terminated with status 5
systemd-udevd[184]: starting version 208
fuse init (API version 7.23)
usbcore: registered new interface driver uas
sd 0:0:0:0: Attached scsi generic sg0 type 0
EXT4-fs (sda3): re-mounted. Opts: (null)
NET: Registered protocol family 10
smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: Error while reading from descriptor: Broken pipe
init: failsafe main process (411) killed by TERM signal
smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth main process (80) killed by USR2 signal
init: plymouth-stop pre-start process (666) terminated with status 2
init: plymouth-stop pre-start process (984) terminated with status 1
init: tty1 main process (985) killed by TERM signal
systemd-logind[1013]: New seat seat0.
systemd-logind[1013]: Failed to start unit user@0.service: Unknown unit: user@0.service
systemd-logind[1013]: Failed to start user service: Unknown unit: user@0.service
systemd-logind[1013]: New session c1 of user root.
systemd-logind[1013]: New session c2 of user root.
systemd-logind[1013]: New session c3 of user root.