dmesg - 1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-32-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4)
Command line: BOOT_IMAGE=/vmlinuz-3.13.0-32-generic root=/dev/mapper/ubuntuFC--vg-root ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable
BIOS-e820: [mem 0x000000000009bc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bd488fff] usable
BIOS-e820: [mem 0x00000000bd489000-0x00000000bd54afff] ACPI NVS
BIOS-e820: [mem 0x00000000bd54b000-0x00000000bf594fff] usable
BIOS-e820: [mem 0x00000000bf595000-0x00000000bf596fff] reserved
BIOS-e820: [mem 0x00000000bf597000-0x00000000bf68cfff] usable
BIOS-e820: [mem 0x00000000bf68d000-0x00000000bf6e4fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf6e5000-0x00000000bf6e9fff] usable
BIOS-e820: [mem 0x00000000bf6ea000-0x00000000bf6f2fff] ACPI data
BIOS-e820: [mem 0x00000000bf6f3000-0x00000000bf6f3fff] usable
BIOS-e820: [mem 0x00000000bf6f4000-0x00000000bf6fefff] ACPI data
BIOS-e820: [mem 0x00000000bf6ff000-0x00000000bf6fffff] usable
BIOS-e820: [mem 0x00000000bf700000-0x00000000bf7fffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: /DP35DP, BIOS DPP3510J.86A.0407.2008.0218.0923 02/18/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0xbf700 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BF800000 mask FFF800000 uncachable
3 base 0BF700000 mask FFFF00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
reg 3, base: 3063MB, range: 1MB, type UC
total RAM covered: 3063M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3063MB, range: 1MB, type UC
reg 3, base: 3064MB, range: 8MB, type UC
found SMP MP-table at [mem 0x000fe200-0x000fe20f] mapped at [ffff8800000fe200]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000095000] 95000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0xbf200000-0xbf3fffff]
[mem 0xbf200000-0xbf3fffff] page 2M
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0xbc000000-0xbd488fff]
[mem 0xbc000000-0xbd3fffff] page 2M
[mem 0xbd400000-0xbd488fff] page 4k
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0xbd54b000-0xbf1fffff]
[mem 0xbd54b000-0xbd5fffff] page 4k
[mem 0xbd600000-0xbf1fffff] page 2M
init_memory_mapping: [mem 0x80000000-0xbbffffff]
[mem 0x80000000-0xbbffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7fffffff] page 2M
init_memory_mapping: [mem 0xbf400000-0xbf594fff]
[mem 0xbf400000-0xbf594fff] page 4k
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0xbf597000-0xbf68cfff]
[mem 0xbf597000-0xbf68cfff] page 4k
init_memory_mapping: [mem 0xbf6e5000-0xbf6e9fff]
[mem 0xbf6e5000-0xbf6e9fff] page 4k
init_memory_mapping: [mem 0xbf6f3000-0xbf6f3fff]
[mem 0xbf6f3000-0xbf6f3fff] page 4k
init_memory_mapping: [mem 0xbf6ff000-0xbf6fffff]
[mem 0xbf6ff000-0xbf6fffff] page 4k
RAMDISK: [mem 0x3599c000-0x36cc5fff]
ACPI: RSDP 00000000000fe020 000014 (v00 INTEL )
ACPI: RSDT 00000000bf6fd038 00005C (v01 INTEL DP35DP 00000197 01000013)
ACPI: FACP 00000000bf6fc000 000074 (v01 INTEL DP35DP 00000197 MSFT 01000013)
ACPI: DSDT 00000000bf6f8000 003DAD (v01 INTEL DP35DP 00000197 MSFT 01000013)
ACPI: FACS 00000000bf698000 000040
ACPI: APIC 00000000bf6f7000 000078 (v01 INTEL DP35DP 00000197 MSFT 01000013)
ACPI: WDDT 00000000bf6f6000 000040 (v01 INTEL DP35DP 00000197 MSFT 01000013)
ACPI: MCFG 00000000bf6f5000 00003C (v01 INTEL DP35DP 00000197 MSFT 01000013)
ACPI: ASF! 00000000bf6f4000 0000A6 (v32 INTEL DP35DP 00000197 MSFT 01000013)
ACPI: SSDT 00000000bf6f2000 000204 (v01 INTEL CpuPm 00000197 MSFT 01000013)
ACPI: SSDT 00000000bf6f1000 0001F9 (v01 INTEL Cpu0Ist 00000197 MSFT 01000013)
ACPI: SSDT 00000000bf6f0000 0001F9 (v01 INTEL Cpu1Ist 00000197 MSFT 01000013)
ACPI: SSDT 00000000bf6ef000 0001F9 (v01 INTEL Cpu2Ist 00000197 MSFT 01000013)
ACPI: SSDT 00000000bf6ee000 0001F9 (v01 INTEL Cpu3Ist 00000197 MSFT 01000013)
ACPI: SSDT 00000000bf6ed000 0000DD (v01 INTEL Cpu0Cst 00000197 MSFT 01000013)
ACPI: SSDT 00000000bf6ec000 0000DD (v01 INTEL Cpu1Cst 00000197 MSFT 01000013)
ACPI: SSDT 00000000bf6eb000 0000DD (v01 INTEL Cpu2Cst 00000197 MSFT 01000013)
ACPI: SSDT 00000000bf6ea000 0000DD (v01 INTEL Cpu3Cst 00000197 MSFT 01000013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000000bf6fffff]
Initmem setup node 0 [mem 0x00000000-0xbf6fffff]
NODE_DATA [mem 0xbf6e5000-0xbf6e9fff]
[ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800ba400000-ffff8800bd3fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009afff]
node 0: [mem 0x00100000-0xbd488fff]
node 0: [mem 0xbd54b000-0xbf594fff]
node 0: [mem 0xbf597000-0xbf68cfff]
node 0: [mem 0xbf6e5000-0xbf6e9fff]
node 0: [mem 0xbf6f3000-0xbf6f3fff]
node 0: [mem 0xbf6ff000-0xbf6fffff]
On node 0 totalpages: 783722
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3994 pages, LIFO batch:0
DMA32 zone: 12188 pages used for memmap
DMA32 zone: 779728 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbd489000-0xbd54afff]
PM: Registered nosave memory: [mem 0xbf595000-0xbf596fff]
PM: Registered nosave memory: [mem 0xbf68d000-0xbf6e4fff]
PM: Registered nosave memory: [mem 0xbf6ea000-0xbf6f2fff]
PM: Registered nosave memory: [mem 0xbf6f4000-0xbf6fefff]
e820: [mem 0xbf800000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff8800bf000000 s86336 r8192 d24256 u524288
pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 771449
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-32-generic root=/dev/mapper/ubuntuFC--vg-root ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3049008K/3134888K available (7363K kernel code, 1142K rwdata, 3400K rodata, 1336K init, 1440K bss, 85880K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:712 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 12582912 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Fast TSC calibration using PIT
tsc: Detected 2999.623 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.24 BogoMIPS (lpj=11998492)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28495 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (fam: 06, model: 17, stepping: 06)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (11998.49 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbd489000-0xbd54afff] (794624 bytes)
PM: Registering ACPI NVS region [mem 0xbf68d000-0xbf6e4fff] (360448 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 12:45:11, date: 02/03/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfeafffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff]
pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:29c4] type 00 class 0x078000
pci 0000:00:03.0: reg 0x10: [mem 0xc4326100-0xc432610f 64bit]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:294c] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xc4300000-0xc431ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xc4324000-0xc4324fff]
pci 0000:00:19.0: reg 0x18: [io 0x4400-0x441f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x40e0-0x40ff]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x40c0-0x40df]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0x40a0-0x40bf]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xc4325c00-0xc4325fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xc4320000-0xc4323fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x4080-0x409f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x4060-0x407f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x4040-0x405f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xc4325800-0xc4325bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: address space collision: [io 0x0400-0x047f] conflicts with ACPI CPU throttle [??? 0x00000410-0x00000415 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f)
pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x4428-0x442f]
pci 0000:00:1f.2: reg 0x14: [io 0x4434-0x4437]
pci 0000:00:1f.2: reg 0x18: [io 0x4420-0x4427]
pci 0000:00:1f.2: reg 0x1c: [io 0x4430-0x4433]
pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f]
pci 0000:00:1f.2: reg 0x24: [mem 0xc4325000-0xc43257ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xc4326000-0xc43260ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f]
pci 0000:01:00.0: [1077:2432] type 00 class 0x0c0400
pci 0000:01:00.0: reg 0x10: [io 0x3400-0x34ff]
pci 0000:01:00.0: reg 0x14: [mem 0xc4200000-0xc4203fff 64bit]
pci 0000:01:00.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref]
pci 0000:01:00.1: [1077:2432] type 00 class 0x0c0400
pci 0000:01:00.1: reg 0x10: [io 0x3000-0x30ff]
pci 0000:01:00.1: reg 0x14: [mem 0xc4204000-0xc4207fff 64bit]
pci 0000:01:00.1: reg 0x30: [mem 0xfffc0000-0xffffffff pref]
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xc4200000-0xc42fffff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [11ab:6101] type 00 class 0x01018f
pci 0000:03:00.0: reg 0x10: [io 0x2018-0x201f]
pci 0000:03:00.0: reg 0x14: [io 0x2024-0x2027]
pci 0000:03:00.0: reg 0x18: [io 0x2010-0x2017]
pci 0000:03:00.0: reg 0x1c: [io 0x2020-0x2023]
pci 0000:03:00.0: reg 0x20: [io 0x2000-0x200f]
pci 0000:03:00.0: reg 0x24: [mem 0xc4100000-0xc41001ff]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0xc4100000-0xc41fffff]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:07:00.0: [8086:107c] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [mem 0xc4020000-0xc403ffff]
pci 0000:07:00.0: reg 0x14: [mem 0xc4000000-0xc401ffff]
pci 0000:07:00.0: reg 0x18: [io 0x1400-0x143f]
pci 0000:07:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:01.0: [1095:3114] type 00 class 0x010400
pci 0000:07:01.0: reg 0x10: [io 0x1458-0x145f]
pci 0000:07:01.0: reg 0x14: [io 0x1464-0x1467]
pci 0000:07:01.0: reg 0x18: [io 0x1450-0x1457]
pci 0000:07:01.0: reg 0x1c: [io 0x1460-0x1463]
pci 0000:07:01.0: reg 0x20: [io 0x1440-0x144f]
pci 0000:07:01.0: reg 0x24: [mem 0xc4044800-0xc4044bff]
pci 0000:07:01.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:07:01.0: supports D1 D2
pci 0000:07:02.0: [121a:0005] type 00 class 0x030000
pci 0000:07:02.0: reg 0x10: [mem 0xc2000000-0xc3ffffff]
pci 0000:07:02.0: reg 0x14: [mem 0xc0000000-0xc1ffffff pref]
pci 0000:07:02.0: reg 0x18: [io 0x1000-0x10ff]
pci 0000:07:02.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:07:03.0: [104c:8023] type 00 class 0x0c0010
pci 0000:07:03.0: reg 0x10: [mem 0xc4044000-0xc40447ff]
pci 0000:07:03.0: reg 0x14: [mem 0xc4040000-0xc4043fff]
pci 0000:07:03.0: supports D1 D2
pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1e.0: bridge window [mem 0xc2000000-0xc40fffff]
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc1ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfeafffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xefffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: Enabled 3 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:07:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:07:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009bc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbd489000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf595000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf68d000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf6ea000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf6f4000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf700000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfeb03fff] has been reserved
system 00:00: [mem 0xfed13000-0xfed13fff] has been reserved
system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed45000-0xfed99fff] has been reserved
system 00:00: [mem 0x000c0000-0x000dffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:05: [io 0x0500-0x053f] has been reserved
system 00:05: [io 0x0400-0x047f] could not be reserved
system 00:05: [io 0x0680-0x06ff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0003 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:01:00.1: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:07:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:07:01.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
pci 0000:07:02.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000
pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:01.0: BAR 15: assigned [mem 0xf8000000-0xf80fffff pref]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8100000-0xf82fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8300000-0xf84fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8500000-0xf86fffff 64bit pref]
pci 0000:00:1c.2: BAR 14: assigned [mem 0xf8700000-0xf88fffff]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xf8900000-0xf8afffff 64bit pref]
pci 0000:00:1c.3: BAR 14: assigned [mem 0xf8b00000-0xf8cfffff]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xf8d00000-0xf8efffff 64bit pref]
pci 0000:00:1c.4: BAR 14: assigned [mem 0xf8f00000-0xf90fffff]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xf9100000-0xf92fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff]
pci 0000:00:1c.3: BAR 13: assigned [io 0x7000-0x7fff]
pci 0000:00:1c.4: BAR 13: assigned [io 0x8000-0x8fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf8000000-0xf803ffff pref]
pci 0000:01:00.1: BAR 6: assigned [mem 0xf8040000-0xf807ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xc4200000-0xc42fffff]
pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf80fffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xf8100000-0xf82fffff]
pci 0000:00:1c.0: bridge window [mem 0xf8300000-0xf84fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0xc4100000-0xc41fffff]
pci 0000:00:1c.1: bridge window [mem 0xf8500000-0xf86fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.2: bridge window [mem 0xf8700000-0xf88fffff]
pci 0000:00:1c.2: bridge window [mem 0xf8900000-0xf8afffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.3: bridge window [mem 0xf8b00000-0xf8cfffff]
pci 0000:00:1c.3: bridge window [mem 0xf8d00000-0xf8efffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [io 0x8000-0x8fff]
pci 0000:00:1c.4: bridge window [mem 0xf8f00000-0xf90fffff]
pci 0000:00:1c.4: bridge window [mem 0xf9100000-0xf92fffff 64bit pref]
pci 0000:07:01.0: BAR 6: assigned [mem 0xc4080000-0xc40fffff pref]
pci 0000:07:00.0: BAR 6: assigned [mem 0xc4060000-0xc407ffff pref]
pci 0000:07:02.0: BAR 6: assigned [mem 0xc4050000-0xc405ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 07]
pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1e.0: bridge window [mem 0xc2000000-0xc40fffff]
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc1ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff]
pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfeafffff]
pci_bus 0000:00: resource 9 [mem 0xc0000000-0xefffffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xc4200000-0xc42fffff]
pci_bus 0000:01: resource 2 [mem 0xf8000000-0xf80fffff pref]
pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:02: resource 1 [mem 0xf8100000-0xf82fffff]
pci_bus 0000:02: resource 2 [mem 0xf8300000-0xf84fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xc4100000-0xc41fffff]
pci_bus 0000:03: resource 2 [mem 0xf8500000-0xf86fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:04: resource 1 [mem 0xf8700000-0xf88fffff]
pci_bus 0000:04: resource 2 [mem 0xf8900000-0xf8afffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:05: resource 1 [mem 0xf8b00000-0xf8cfffff]
pci_bus 0000:05: resource 2 [mem 0xf8d00000-0xf8efffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:06: resource 1 [mem 0xf8f00000-0xf90fffff]
pci_bus 0000:06: resource 2 [mem 0xf9100000-0xf92fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:07: resource 1 [mem 0xc2000000-0xc40fffff]
pci_bus 0000:07: resource 2 [mem 0xc0000000-0xc1ffffff 64bit pref]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000e0000-0x000effff]
pci_bus 0000:07: resource 8 [mem 0xf8000000-0xfeafffff]
pci_bus 0000:07: resource 9 [mem 0xc0000000-0xefffffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:07:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19624K (ffff88003599c000 - ffff880036cc6000)
microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60b
microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60b
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1422967510.440:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 5993
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.2: enabling device (0000 -> 0003)
pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.3: enabling device (0000 -> 0003)
pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.4: enabling device (0000 -> 0003)
pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1280x1024x24, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90008780000, using 4096k, total 4096k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
ipmi message handler version 39.2
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
GHES: HEST is not enabled!
00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 921600) is a NS16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 17, io mem 0xc4325c00
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xc4325800
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 18, io base 0x000040e0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
tsc: Refined TSC clocksource calibration: 2999.658 MHz
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-32-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-32-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 17, io base 0x000040a0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-32-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.13.0-32-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.13.0-32-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.13.0-32-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 5e3c0f9ca6e36543535fa2bb5b709e84f16da7c7'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
usb 4-1: new low-speed USB device number 2 using uhci_hcd
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 3:706:783
rtc_cmos 00:02: setting system clock to 2015-02-03 12:45:13 UTC (1422967513)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
usb 4-1: New USB device found, idVendor=047d, idProduct=1018
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB Mouse
usb 4-1: Manufacturer: Kensington
usb 4-2: new low-speed USB device number 3 using uhci_hcd
usb 4-2: New USB device found, idVendor=413c, idProduct=2003
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: Dell USB Keyboard
usb 4-2: Manufacturer: Dell
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
Switched to clocksource tsc
Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)
Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)
systemd-udevd[106]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.08-k.
qla2xxx [0000:01:00.0]-001d: : Found an ISP2432 irq 16 iobase 0xffffc9000067e000.
qla2xxx 0000:01:00.0: irq 47 for MSI/MSI-X
qla2xxx 0000:01:00.0: irq 48 for MSI/MSI-X
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:18:f5:bf
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 6, PBA No: FFFFFF-0FF
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 49 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc ems
scsi1 : pata_marvell
scsi0 : qla2xxx
qla2xxx [0000:01:00.0]-00fb:0: QLogic QLE2462 - QLogic 4GB FC Dual-Port PCI-E HBA for IBM System x.
qla2xxx [0000:01:00.0]-00fc:0: ISP2432: PCIe (2.5GT/s x4) @ 0000:01:00.0 hdma- host#=0 fw=7.01.00 (9496).
qla2xxx [0000:01:00.1]-001d: : Found an ISP2432 irq 17 iobase 0xffffc90008752000.
qla2xxx 0000:01:00.1: irq 50 for MSI/MSI-X
qla2xxx 0000:01:00.1: irq 51 for MSI/MSI-X
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
ata3: SATA max UDMA/133 abar m2048@0xc4325000 port 0xc4325100 irq 49
ata4: SATA max UDMA/133 abar m2048@0xc4325000 port 0xc4325180 irq 49
ata5: SATA max UDMA/133 abar m2048@0xc4325000 port 0xc4325200 irq 49
ata6: SATA max UDMA/133 abar m2048@0xc4325000 port 0xc4325280 irq 49
ata7: SATA max UDMA/133 abar m2048@0xc4325000 port 0xc4325300 irq 49
ata8: SATA max UDMA/133 abar m2048@0xc4325000 port 0xc4325380 irq 49
e1000 0000:07:00.0 eth1: (PCI:33MHz:32-bit) 00:1b:21:58:09:1f
e1000 0000:07:00.0 eth1: Intel(R) PRO/1000 Network Connection
sata_sil 0000:07:01.0: version 2.4
sata_sil 0000:07:01.0: Applying R_ERR on DMA activate FIS errata fix
scsi10 : pata_marvell
scsi9 : sata_sil
scsi11 : sata_sil
scsi12 : sata_sil
scsi13 : sata_sil
ata9: SATA max UDMA/100 mmio m1024@0xc4044800 tf 0xc4044880 irq 22
ata10: SATA max UDMA/100 mmio m1024@0xc4044800 tf 0xc40448c0 irq 22
ata11: SATA max UDMA/100 mmio m1024@0xc4044800 tf 0xc4044a80 irq 22
ata12: SATA max UDMA/100 mmio m1024@0xc4044800 tf 0xc4044ac0 irq 22
ata1: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq 17
ata2: DUMMY
input: Kensington USB Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input5
hid-generic 0003:047D:1018.0001: input,hidraw0: USB HID v1.00 Mouse [Kensington USB Mouse] on usb-0000:00:1a.1-1/input0
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input6
hid-generic 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.1-2/input0
scsi2 : qla2xxx
firewire_ohci 0000:07:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
qla2xxx [0000:01:00.1]-00fb:2: QLogic QLE2462 - QLogic 4GB FC Dual-Port PCI-E HBA for IBM System x.
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
qla2xxx [0000:01:00.1]-00fc:2: ISP2432: PCIe (2.5GT/s x4) @ 0000:01:00.1 hdma- host#=2 fw=7.01.00 (9496).
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata9.00: ATAPI: TSSTcorp CD-RW/DVD-ROM TS-H493B, D400, max UDMA/33
ata9.00: configured for UDMA/33
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
firewire_core 0000:07:03.0: created device fw0: GUID 009027000036c9eb, S400
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: ATA-8: ST2000DL003-9VT166, CC3C, max UDMA/133
ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata5.00: ATA-8: ST2000DL003-9VT166, CC31, max UDMA/133
ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata6.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/133
ata4.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata8.00: ATA-9: ST500LM000-1EJ162, SM14, max UDMA/133
ata8.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata6.00: configured for UDMA/133
ata4.00: configured for UDMA/133
ata8.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg0 type 0
scsi 4:0:0:0: Direct-Access ATA WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg1 type 0
scsi 5:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC31 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 4:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 4:0:0:0: [sdb] 4096-byte physical blocks
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 3:0:0:0: [sda] 4096-byte physical blocks
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 6:0:0:0: Direct-Access ATA WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg3 type 0
scsi 7:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC3C PQ: 0 ANSI: 5
sd 7:0:0:0: Attached scsi generic sg4 type 0
scsi 8:0:0:0: Direct-Access ATA ST500LM000-1EJ16 SM14 PQ: 0 ANSI: 5
sd 8:0:0:0: Attached scsi generic sg5 type 0
sd 8:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 8:0:0:0: [sdf] 4096-byte physical blocks
sd 7:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 7:0:0:0: [sde] 4096-byte physical blocks
sd 6:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 6:0:0:0: [sdd] 4096-byte physical blocks
sd 8:0:0:0: [sdf] Write Protect is off
sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sde] Write Protect is off
sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1 sde9
sd 7:0:0:0: [sde] Attached SCSI disk
scsi 9:0:0:0: CD-ROM TSSTcorp CDRWDVD TS-H493B D400 PQ: 0 ANSI: 5
sdc: sdc1 sdc9
sd 5:0:0:0: [sdc] Attached SCSI disk
sr0: scsi3-mmc drive: 8x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 9:0:0:0: Attached scsi CD-ROM sr0
sdb: sdb1 sdb9
sd 4:0:0:0: [sdb] Attached SCSI disk
sr 9:0:0:0: Attached scsi generic sg6 type 5
ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata10.00: ATA-6: ST3160023AS, 5.06, max UDMA/133
ata10.00: 312581808 sectors, multi 16: LBA48
ata10.00: configured for UDMA/100
scsi 11:0:0:0: Direct-Access ATA ST3160023AS 5.06 PQ: 0 ANSI: 5
sd 11:0:0:0: Attached scsi generic sg7 type 0
sd 11:0:0:0: [sdg] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 11:0:0:0: [sdg] Write Protect is off
sd 11:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 11:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
random: nonblocking pool is initialized
sda: unknown partition table
sd 3:0:0:0: [sda] Attached SCSI disk
sdg: sdg1 sdg2 < sdg5 >
sdd: unknown partition table
sd 6:0:0:0: [sdd] Attached SCSI disk
sdf: sdf1
sd 8:0:0:0: [sdf] Attached SCSI disk
sd 11:0:0:0: [sdg] Attached SCSI disk
ata11: SATA link down (SStatus 0 SControl 310)
ata12: SATA link down (SStatus 0 SControl 310)
bio: create slab at 1
EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
EXT4-fs (dm-0): write access will be enabled during recovery
EXT4-fs (dm-0): recovery complete
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
spl: module verification failed: signature and/or required key missing - tainting kernel
SPL: Loaded module v0.6.3-3~trusty
znvpair: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
ZFS: Loaded module v0.6.3-5~trusty, ZFS pool version 5000, ZFS filesystem version 5
Adding 3137532k swap on /dev/mapper/ubuntuFC--vg-swap_1. Priority:-1 extents:1 across:3137532k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
systemd-udevd[487]: starting version 204
lp: driver loaded but no devices found
mei_me 0000:00:03.0: irq 52 for MSI/MSI-X
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \IGPO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
type=1400 audit(1422967534.995:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=533 comm="apparmor_parser"
type=1400 audit(1422967534.995:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=533 comm="apparmor_parser"
type=1400 audit(1422967534.995:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=533 comm="apparmor_parser"
type=1400 audit(1422967534.995:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=533 comm="apparmor_parser"
type=1400 audit(1422967534.995:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=533 comm="apparmor_parser"
type=1400 audit(1422967534.995:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=533 comm="apparmor_parser"
type=1400 audit(1422967534.995:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=532 comm="apparmor_parser"
type=1400 audit(1422967534.995:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=532 comm="apparmor_parser"
type=1400 audit(1422967534.995:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=532 comm="apparmor_parser"
type=1400 audit(1422967534.995:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=532 comm="apparmor_parser"
snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
kvm: disabled by bios
autoconfig: line_outs=3 (0xd/0xf/0x10/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x21/0x0
inputs:
Front Mic=0xb
Rear Mic=0xe
Line=0xc
gpio_ich: GPIO from 195 to 255 on gpio_ich
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Speaker CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Speaker Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Speaker Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: udev-fallback-graphics main process (955) terminated with status 1
EXT4-fs (sdg1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sdg1): mounted filesystem without journal. Opts: (null)
init: failsafe main process (996) killed by TERM signal
audit_printk_skb: 6 callbacks suppressed
type=1400 audit(1422967542.215:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1122 comm="apparmor_parser"
type=1400 audit(1422967542.215:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1122 comm="apparmor_parser"
type=1400 audit(1422967542.215:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1122 comm="apparmor_parser"
type=1400 audit(1422967542.215:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1122 comm="apparmor_parser"
type=1400 audit(1422967542.215:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1122 comm="apparmor_parser"
type=1400 audit(1422967542.219:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1122 comm="apparmor_parser"
type=1400 audit(1422967542.219:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1124 comm="apparmor_parser"
Rounding down aligned max_sectors from 4294967295 to 4294967288
Source se_lun->lun_sep or lun->lun_sep->sep_tpg does not exist
Source se_lun->lun_sep or lun->lun_sep->sep_tpg does not exist
Source se_lun->lun_sep or lun->lun_sep->sep_tpg does not exist
Source se_lun->lun_sep or lun->lun_sep->sep_tpg does not exist
Source se_lun->lun_sep or lun->lun_sep->sep_tpg does not exist
Source se_lun->lun_sep or lun->lun_sep->sep_tpg does not exist
qla2xxx [0000:01:00.1]-00af:2: Performing ISP error recovery - ha=ffff880036638000.
qla2xxx [0000:01:00.1]-505f:2: Link is operational (4 Gbps).
qla2xxx [0000:01:00.1]-1020:2: **** Failed mbx[0]=4006, mb[1]=7fe, mb[2]=1, mb[3]=3, cmd=6a ****.
qla2xxx [0000:01:00.1]-1020:2: **** Failed mbx[0]=4005, mb[1]=4, mb[2]=8800, mb[3]=ffff, cmd=70 ****.
qla2xxx [0000:01:00.1]-0121:2: Failed to enable receiving of RSCN requests: 0x2.
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
init: plymouth-upstart-bridge main process ended, respawning
sda: sda1 sda9
sdb: sdb1 sdb9
sdc: sdc1 sdc9
sdd: sdd1 sdd9
sde: sde1 sde9
SPL: using hostid 0x010a0538
zd0: unknown partition table
zd16: unknown partition table
zd32: unknown partition table
zd48: unknown partition table
Rounding down aligned max_sectors from 4294967295 to 4294967288
Rounding down aligned max_sectors from 4294967295 to 4294967288
Rounding down aligned max_sectors from 4294967295 to 4294967288
MODE SENSE: unimplemented page/subpage: 0x1c/0x02
MODE SENSE: unimplemented page/subpage: 0x1c/0x02
MODE SENSE: unimplemented page/subpage: 0x1c/0x02
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
perf samples too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
ABORT_TASK: Found referenced qla2xxx task_tag: 1172736
ABORT_TASK: Found referenced qla2xxx task_tag: 1172692
ABORT_TASK: Sending TMR_FUNCTION_COMPLETE for ref_tag: 1172692
ABORT_TASK: Sending TMR_FUNCTION_COMPLETE for ref_tag: 1172736
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.
TARGET_CORE[qla2xxx]: Unsupported SCSI Opcode 0x85, sending CHECK_CONDITION.