dmesg - portatil
Linux version 3.12.36-pae-wifislax (root@wifislax) (gcc version 4.8.3 (GCC) ) #1 SMP PREEMPT Wed Jan 14 18:09:22 GMT 2015
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf4d1fff] usable
BIOS-e820: [mem 0x00000000bf4d2000-0x00000000bf4dcfff] reserved
BIOS-e820: [mem 0x00000000bf4dd000-0x00000000bf533fff] usable
BIOS-e820: [mem 0x00000000bf534000-0x00000000bf536fff] reserved
BIOS-e820: [mem 0x00000000bf537000-0x00000000bf5bafff] usable
BIOS-e820: [mem 0x00000000bf5bb000-0x00000000bf5befff] reserved
BIOS-e820: [mem 0x00000000bf5bf000-0x00000000bf679fff] usable
BIOS-e820: [mem 0x00000000bf67a000-0x00000000bf6befff] ACPI NVS
BIOS-e820: [mem 0x00000000bf6bf000-0x00000000bf6fffff] ACPI data
BIOS-e820: [mem 0x00000000bf700000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Hewlett-Packard Compaq Presario C700 Notebook PC/30D9, BIOS F.33 04/29/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0xbf67a max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFFE0000 mask FFFFE0000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0BF800000 mask FFF800000 uncachable
4 base 0BF700000 mask FFFF00000 uncachable
5 disabled
6 disabled
7 disabled
found SMP MP-table at [mem 0x000fe270-0x000fe27f] mapped at [c00fe270]
initial memory mapped: [mem 0x00000000-0x01bfffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37600000-0x377fffff]
[mem 0x37600000-0x377fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x375fffff]
[mem 0x34000000-0x375fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37800000-0x379fdfff]
[mem 0x37800000-0x379fdfff] page 4k
BRK [0x0168a000, 0x0168afff] PGTABLE
BRK [0x0168b000, 0x0168cfff] PGTABLE
ACPI: RSDP 000fe020 00024 (v02 HP )
ACPI: XSDT bf6fe120 0006C (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP bf6fd000 000F4 (v04 HP SPARTAN 00000001 LOHR 00000000)
ACPI: DSDT bf6f4000 0802F (v01 HP SPARTAN 00000001 LOHR 00000000)
ACPI: FACS bf67d000 00040
ACPI: APIC bf6f3000 00068 (v02 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
ACPI: HPET bf6f2000 00038 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
ACPI: MCFG bf6f1000 0003C (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
ACPI: ASF! bf6f0000 000A5 (v32 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
ACPI: SLIC bf6ef000 00176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
ACPI: BOOT bf6ee000 00028 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
ACPI: SSDT bf6ed000 005D7 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT bf6ec000 004C4 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000000bf679fff]
Initmem setup node 0 [mem 0x00000000-0xbf679fff]
NODE_DATA [mem 0x379fc000-0x379fdfff]
2172MB HIGHMEM available.
889MB LOWMEM available.
max_low_pfn = 379fe, highstart_pfn = 379fe
Low memory ends at vaddr f79fe000
High memory starts at vaddr f79fe000
mapped low ram: 0 - 379fe000
low ram: 0 - 379fe000
BRK [0x0168d000, 0x0168dfff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x379fdfff]
HighMem [mem 0x379fe000-0xbf679fff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xbf4d1fff]
node 0: [mem 0xbf4dd000-0xbf533fff]
node 0: [mem 0xbf537000-0xbf5bafff]
node 0: [mem 0xbf5bf000-0xbf679fff]
On node 0 totalpages: 783878
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3998 pages, LIFO batch:0
Normal zone: 1748 pages used for memmap
Normal zone: 223742 pages, LIFO batch:31
HighMem zone: 4345 pages used for memmap
HighMem zone: 556138 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @f61d2000 s28096 r0 d21056 u49152
pcpu-alloc: s28096 r0 d21056 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 782098
Policy zone: HighMem
Kernel command line: quiet BOOT_IMAGE=/boot/vmlinuz-3.12.36-pae-wifislax root=/dev/sda2 ro quiet splash vga=788 rw
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (000379fe:000bf67a)
Memory: 3103188K/3135512K available (4088K kernel code, 291K rwdata, 1348K rodata, 528K init, 360K bss, 32324K reserved, 2224552K highmem)
virtual kernel memory layout:
fixmap : 0xffd35000 - 0xfffff000 (2856 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xc159a000 - 0xc161e000 ( 528 kB)
.data : 0xc13fe61e - 0xc1599d40 (1645 kB)
.text : 0xc1000000 - 0xc13fe61e (4089 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
Dump stacks of tasks blocking RCU-preempt GP.
RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f5c08000 soft=f5c0a000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2128.021 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.04 BogoMIPS (lpj=2128021)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
ACPI: Core revision 20130725
ACPI: All ACPI Tables successfully acquired
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Celeron(R) CPU 560 @ 2.13GHz (fam: 06, model: 16, stepping: 01)
Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Brought up 1 CPUs
smpboot: Total of 1 processors activated (4256.04 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbf67a000-0xbf6befff] (282624 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: GPE storm detected(9 GPEs), transactions will use polling mode
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20130725/nsarguments-189)
\_SB_.PCI0:_OSC evaluation returned wrong type
_OSC request data:1 8 0
ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20130725/nsarguments-189)
\_SB_.PCI0:_OSC evaluation returned wrong type
_OSC request data:1 1f 0
acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd1000000-0xd10fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x30d0-0x30d7]
pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0xd1100000-0xd11fffff 64bit]
pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd2400000-0xd2403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x3080-0x309f]
pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x3040-0x305f]
pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xd2404800-0xd2404bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
pci 0000:00:1f.0: address space collision: [io 0x0400-0x047f] conflicts with ACPI CPU throttle [??? 0x00000410-0x00000415 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x30c8-0x30cf]
pci 0000:00:1f.1: reg 0x14: [io 0x30e4-0x30e7]
pci 0000:00:1f.1: reg 0x18: [io 0x30c0-0x30c7]
pci 0000:00:1f.1: reg 0x1c: [io 0x30e0-0x30e3]
pci 0000:00:1f.1: reg 0x20: [io 0x30a0-0x30af]
pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x30b8-0x30bf]
pci 0000:00:1f.2: reg 0x14: [io 0x30dc-0x30df]
pci 0000:00:1f.2: reg 0x18: [io 0x30b0-0x30b7]
pci 0000:00:1f.2: reg 0x1c: [io 0x30d8-0x30db]
pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd2404000-0xd24047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd2404c00-0xd2404cff]
pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f]
pci 0000:01:00.0: [168c:001c] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xd1300000-0xd130ffff 64bit]
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xd1300000-0xd23fffff]
pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
pci 0000:02:01.0: [10ec:8139] type 00 class 0x020000
pci 0000:02:01.0: reg 0x10: [io 0x1000-0x10ff]
pci 0000:02:01.0: reg 0x14: [mem 0xd1200000-0xd12000ff]
pci 0000:02:01.0: supports D1 D2
pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1e.0: bridge window [mem 0xd1200000-0xd12fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: Enabled 8 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf4d2000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf534000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf5bb000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf67a000-0xbfffffff]
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1e.0 BAR 13 [io 0x1000-0x1fff]
system 00:00: [io 0x0600-0x060f] has been reserved
system 00:00: [io 0x0610] has been reserved
system 00:00: [io 0x0800-0x080f] has been reserved
system 00:00: [io 0x0810-0x0817] has been reserved
system 00:00: [io 0x0400-0x047f] could not be reserved
system 00:00: [io 0x0500-0x053f] has been reserved
system 00:00: [io 0xff2c-0xff2f] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:07: Plug and Play ACPI device, IDs AUI0214 PNP0f13 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xd1300000-0xd23fffff]
pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 02]
pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1e.0: bridge window [mem 0xd1200000-0xd12fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xd1300000-0xd23fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xd1200000-0xd12fffff]
pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 7 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
bounce pool size: 64 pages
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.22)
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
aufs 3.12.31+-20141215
msgmni has been set to 1716
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at drivers/pci/hotplug/ibmphp_ebda.c:282 ibmphp_access_ebda+0x113/0x1c67()
ibmphp_ebda: next read is beyond ebda_sz
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.12.36-pae-wifislax #1
Hardware name: Hewlett-Packard Compaq Presario C700 Notebook PC/30D9, BIOS F.33 04/29/2008
0000011a c13f89cd f5c37e64 c1030886 c14e9738 f5c37e7c 00000001 c14e9762
0000011a c15b7e31 c15b7e31 00000000 0000ff02 0000ff02 00000400 c10308ce
00000009 f5c37e64 c14e9738 f5c37e7c c15b7e31 c14e9762 0000011a c14e9738
Call Trace:
[] ? dump_stack+0x48/0x6f
[] ? warn_slowpath_common+0x79/0x8e
[] ? ibmphp_access_ebda+0x113/0x1c67
[] ? ibmphp_access_ebda+0x113/0x1c67
[] ? warn_slowpath_fmt+0x33/0x37
[] ? ibmphp_access_ebda+0x113/0x1c67
[] ? down_trylock+0x1b/0x23
[] ? vprintk_emit+0x2a9/0x369
[] ? cpci_hotplug_init+0x8/0x8
[] ? kmem_cache_alloc+0x89/0xaa
[] ? printk+0x37/0x3b
[] ? pci_find_next_bus+0x53/0x57
[] ? cpci_hotplug_init+0x8/0x8
[] ? ibmphp_init+0xb8/0x3f7
[] ? pci_hotplug_init+0x44/0x4b
[] ? cpci_hotplug_init+0x8/0x8
[] ? do_one_initcall+0x8c/0x129
[] ? aio_free_ring+0x73/0x80
[] ? strlen+0x8/0x13
[] ? parse_args+0x169/0x22a
[] ? __wake_up+0x35/0x44
[] ? kernel_init_freeable+0xed/0x182
[] ? do_early_param+0x75/0x75
[] ? kernel_init+0x8/0xc2
[] ? ret_from_kernel_thread+0x6/0x28
[] ? ret_from_kernel_thread+0x1b/0x28
[] ? rest_init+0x71/0x71
---[ end trace f4f5afb0072bb693 ]---
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 800x600x16, linelength=1600, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xc0000000, mapped to 0xf8280000, using 960k, total 960k
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 22
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd2404000 port 0xd2404100 irq 41
ata2: DUMMY
ata3: DUMMY
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30a0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30a8 irq 15
usbcore: registered new interface driver zd1201
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xd2404800
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x00003080
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 20, io base 0x00003060
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 19, io base 0x00003040
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-realtek
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
platform eisa.0: Probing EISA bus 0
(null): [io 0x0c80-0x0c83]
platform eisa.0: EISA: Cannot allocate resource for mainboard
(null): [io 0x1000-0x10ff]
platform eisa.0: Cannot allocate resource for EISA slot 1
(null): [io 0x2000-0x20ff]
platform eisa.0: Cannot allocate resource for EISA slot 2
(null): [io 0x3000-0x30ff]
platform eisa.0: Cannot allocate resource for EISA slot 3
(null): [io 0x4000-0x40ff]
platform eisa.0: Cannot allocate resource for EISA slot 4
(null): [io 0x5000-0x50ff]
platform eisa.0: Cannot allocate resource for EISA slot 5
(null): [io 0x6000-0x60ff]
platform eisa.0: Cannot allocate resource for EISA slot 6
(null): [io 0x7000-0x70ff]
platform eisa.0: Cannot allocate resource for EISA slot 7
(null): [io 0x8000-0x80ff]
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
usbcore: registered new interface driver vub300
usbcore: registered new interface driver ushc
sdhci-pltfm: SDHCI platform and OF driver helper
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
registered taskstats version 1
regulator-dummy: disabling
rtc_cmos 00:02: setting system clock to 2015-01-27 12:32:23 UTC (1422361943)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata4.00: ATAPI: Optiarc DVD RW AD-7561A, GH09, max MWDMA2
ata4.00: configured for MWDMA2
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9250827AS 3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7561A GH09 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-6: new high-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 2127.999 MHz
usb 2-1: new low-speed USB device number 2 using uhci_hcd
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0
Switched to clocksource tsc
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:2.
Freeing unused kernel memory: 528K (c159a000 - c161e000)
udevd[892]: starting version 182
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
Linux agpgart interface v0.103
ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMBA 1 (20130725/utaddress-251)
ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMA1 2 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
8139too: 8139too Fast Ethernet driver 0.9.28
pci 0000:00:1e.0: setting latency timer to 64
8139too 0000:02:01.0: setting latency timer to 64
8139too 0000:02:01.0 eth0: RealTek RTL8139 at 0xf8454000, 00:1e:ec:6d:80:9e, IRQ 16
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
wmi: Mapper loaded
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
Switched to clocksource hpet
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (48 C)
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
input: HP WMI hotkeys as /devices/virtual/input/input8
cfg80211: Calling CRDA to update world regulatory domain
[drm] Initialized drm 1.1.0 20060810
snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
ath5k 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
ath5k 0000:01:00.0: registered as 'phy0'
mousedev: PS/2 mouse device common for all mice
[drm] Memory usable by graphics device = 512M
checking generic (c0000000 f0000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 43 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initialized overlay support
media: Linux media interface: v0.10
fbcon: inteldrmfb (fb0) is primary device
Linux video capture interface: v2.00
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
ath: EEPROM regdomain: 0x67
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x67
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
uvcvideo: Found UVC 1.00 device CNF7041 (04f2:b057)
input: CNF7041 as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Console: switching to colour frame buffer device 160x50
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:16: registered as cooling_device1
ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
Adding 524284k swap on /etc/swapfile1. Priority:-1 extents:4 across:581628k FS
ppdev: user-space parallel port driver
lp: driver loaded but no devices found
cpufreq-nforce2: No nForce2 chipset.
NET: Registered protocol family 10
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
8139too 0000:02:01.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
zram: module is from the staging directory, the quality is unknown, you have been warned.
zram: Created 1 device(s) ...
Adding 262144k swap on /dev/zram0. Priority:32767 extents:1 across:262144k SSFS
wlan0: authenticate with f8:63:94:08:d6:d1
wlan0: send auth to f8:63:94:08:d6:d1 (try 1/3)
wlan0: authenticated
wlan0: associate with f8:63:94:08:d6:d1 (try 1/3)
wlan0: RX AssocResp from f8:63:94:08:d6:d1 (capab=0x411 status=0 aid=9)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
wlan0: authenticate with f8:63:94:08:d6:d1
wlan0: send auth to f8:63:94:08:d6:d1 (try 1/3)
wlan0: authenticated
wlan0: associate with f8:63:94:08:d6:d1 (try 1/3)
wlan0: RX AssocResp from f8:63:94:08:d6:d1 (capab=0x411 status=0 aid=5)
wlan0: associated