dmesg - fvg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-44-generic (buildd@lamiak) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #73-Ubuntu SMP Tue Dec 16 00:22:43 UTC 2014 (Ubuntu 3.13.0-44.73-generic 3.13.11-ckt12)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c88a8fff] usable
BIOS-e820: [mem 0x00000000c88a9000-0x00000000c88affff] ACPI NVS
BIOS-e820: [mem 0x00000000c88b0000-0x00000000c8cfcfff] usable
BIOS-e820: [mem 0x00000000c8cfd000-0x00000000c9148fff] reserved
BIOS-e820: [mem 0x00000000c9149000-0x00000000dd6aefff] usable
BIOS-e820: [mem 0x00000000dd6af000-0x00000000dd8b7fff] reserved
BIOS-e820: [mem 0x00000000dd8b8000-0x00000000dd8cdfff] ACPI data
BIOS-e820: [mem 0x00000000dd8ce000-0x00000000dde0bfff] ACPI NVS
BIOS-e820: [mem 0x00000000dde0c000-0x00000000deffefff] reserved
BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: ASUS All Series/MAXIMUS VI GENE, BIOS 0711 07/01/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7E00000000 write-back
1 base 0200000000 mask 7FF0000000 write-back
2 base 0210000000 mask 7FF8000000 write-back
3 base 0218000000 mask 7FFC000000 write-back
4 base 021C000000 mask 7FFE000000 write-back
5 base 021E000000 mask 7FFF000000 write-back
6 base 00E0000000 mask 7FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 256MB, type WB
reg 2, base: 8448MB, range: 128MB, type WB
reg 3, base: 8576MB, range: 64MB, type WB
reg 4, base: 8640MB, range: 32MB, type WB
reg 5, base: 8672MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
total RAM covered: 8176M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 512MB, type WB
reg 5, base: 8688MB, range: 16MB, type UC
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd760-0x000fd76f] mapped at [ffff8800000fd760]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0x21ee00000-0x21effffff]
[mem 0x21ee00000-0x21effffff] page 2M
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x21c000000-0x21edfffff]
[mem 0x21c000000-0x21edfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21bffffff]
[mem 0x200000000-0x21bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xc88a8fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xc87fffff] page 2M
[mem 0xc8800000-0xc88a8fff] page 4k
init_memory_mapping: [mem 0xc88b0000-0xc8cfcfff]
[mem 0xc88b0000-0xc89fffff] page 4k
[mem 0xc8a00000-0xc8bfffff] page 2M
[mem 0xc8c00000-0xc8cfcfff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
init_memory_mapping: [mem 0xc9149000-0xdd6aefff]
[mem 0xc9149000-0xc91fffff] page 4k
[mem 0xc9200000-0xdd5fffff] page 2M
[mem 0xdd600000-0xdd6aefff] page 4k
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
init_memory_mapping: [mem 0xdefff000-0xdeffffff]
[mem 0xdefff000-0xdeffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x34bcc000-0x365ddfff]
ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
ACPI: XSDT 00000000dd8bc080 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000dd8c8950 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000dd8bc188 00C7C6 (v02 ALASKA A M I 00000024 INTL 20091112)
ACPI: FACS 00000000dde0a080 000040
ACPI: APIC 00000000dd8c8a60 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000dd8c8ad8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000dd8c8b20 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000dd8c9060 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: MCFG 00000000dd8c9b38 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000dd8c9b78 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000dd8c9bb0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000dd8c9f20 00329E (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: BGRT 00000000dd8cd218 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021effffff]
Initmem setup node 0 [mem 0x00000000-0x21effffff]
NODE_DATA [mem 0x21eff7000-0x21effbfff]
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216600000-ffff88021e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xc88a8fff]
node 0: [mem 0xc88b0000-0xc8cfcfff]
node 0: [mem 0xc9149000-0xdd6aefff]
node 0: [mem 0xdefff000-0xdeffffff]
node 0: [mem 0x100000000-0x21effffff]
On node 0 totalpages: 2081273
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14090 pages used for memmap
DMA32 zone: 901725 pages, LIFO batch:31
Normal zone: 18368 pages used for memmap
Normal zone: 1175552 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xc88a9000-0xc88affff]
PM: Registered nosave memory: [mem 0xc8cfd000-0xc9148fff]
PM: Registered nosave memory: [mem 0xdd6af000-0xdd8b7fff]
PM: Registered nosave memory: [mem 0xdd8b8000-0xdd8cdfff]
PM: Registered nosave memory: [mem 0xdd8ce000-0xdde0bfff]
PM: Registered nosave memory: [mem 0xdde0c000-0xdeffefff]
PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88021ec00000 s82304 r8192 d24192 u524288
pcpu-alloc: s82304 r8192 d24192 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2048730
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8084168K/8325092K available (7383K kernel code, 1144K rwdata, 3408K rodata, 1336K init, 1444K bss, 240924K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:712 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3418.106 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6836.21 BogoMIPS (lpj=13672424)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28554 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-4670K CPU @ 3.40GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (27344.84 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xc88a9000-0xc88affff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xdd8ce000-0xdde0bfff] (5496832 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 10:18:21, date: 01/27/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000dd8ad618 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7220000-0xf722ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf723b000-0xf723b00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7200000-0xf721ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7239000-0xf7239fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7238000-0xf72383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7230000-0xf7233fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7237000-0xf72373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7236000-0xf72367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7235000-0xf72350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:13c2] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:0fbb] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:03:00.0: reg 0x10: [io 0xd050-0xd057]
pci 0000:03:00.0: reg 0x14: [io 0xd040-0xd043]
pci 0000:03:00.0: reg 0x18: [io 0xd030-0xd037]
pci 0000:03:00.0: reg 0x1c: [io 0xd020-0xd023]
pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd01f]
pci 0000:03:00.0: reg 0x24: [mem 0xf7100000-0xf71001ff]
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xc88a9000-0xcbffffff]
e820: reserve RAM buffer [mem 0xc8cfd000-0xcbffffff]
e820: reserve RAM buffer [mem 0xdd6af000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x1c00-0x1cfe] has been reserved
system 00:05: [io 0x1d00-0x1dfe] has been reserved
system 00:05: [io 0x1e00-0x1efe] has been reserved
system 00:05: [io 0x1f00-0x1ffe] has been reserved
system 00:05: [io 0x1800-0x18fe] could not be reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io 0x1854-0x1857] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:08: [io 0x0290-0x029f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0xf7fef000-0xf7feffff] has been reserved
system 00:0a: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 26696K (ffff880034bcc000 - ffff8800365de000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd96af000-0xdd6af000] (64MB) mapped at [ffff8800d96af000-ffff8800dd6aefff]
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x9
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1422353901.460:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15841
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7238000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-44-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7237000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-44-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-44-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-44-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 508c3b4bf108ed36b6062f812782f77c37b98537'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 15:328:326
rtc_cmos 00:06: setting system clock to 2015-01-27 10:18:21 UTC (1422353901)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
systemd-udevd[115]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7236000 port 0xf7236100 irq 42
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf7236000 port 0xf7236200 irq 42
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ahci 0000:03:00.0: irq 43 for MSI/MSI-X
ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xf7100000 port 0xf7100100 irq 43
ata8: SATA max UDMA/133 abar m512@0xf7100000 port 0xf7100180 irq 43
usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) ac:22:0b:bf:6d:ac
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
usb 4-3: New USB device found, idVendor=174c, idProduct=3074
usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 4-3: Product: ASM107x
usb 4-3: Manufacturer: Asmedia
usb 4-3: SerialNumber: 00000000A001
hub 4-3:1.0: USB hub found
hub 4-3:1.0: 4 ports detected
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff8802130e35c8), AE_NOT_FOUND (20131115/psparse-536)
ata3.00: ATAPI: ASUS DRW-2014L1T, 1.02, max UDMA/66
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff8802130e35c8), AE_NOT_FOUND (20131115/psparse-536)
ata3.00: configured for UDMA/66
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133
ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: CD-ROM ASUS DRW-2014L1T 1.02 PQ: 0 ANSI: 5
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7.00: supports DRM functions and may not be fully accessible
ata7.00: disabling queued TRIM support
ata7.00: ATA-9: Crucial_CT512M550SSD1, MU01, max UDMA/133
ata7.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata7.00: supports DRM functions and may not be fully accessible
ata7.00: disabling queued TRIM support
ata7.00: configured for UDMA/133
scsi 6:0:0:0: Direct-Access ATA Crucial_CT512M55 MU01 PQ: 0 ANSI: 5
sd 6:0:0:0: [sdb] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
sd 6:0:0:0: [sdb] 4096-byte physical blocks
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb2 < sdb5 sdb6 > sdb3
sd 6:0:0:0: [sdb] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata8: SATA link down (SStatus 0 SControl 300)
usb 3-3: new high-speed USB device number 2 using xhci_hcd
usb 3-3: New USB device found, idVendor=174c, idProduct=2074
usb 3-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 3-3: Product: ASM107x
usb 3-3: Manufacturer: Asmedia
usb 3-3: SerialNumber: 00000000A001
hub 3-3:1.0: USB hub found
hub 3-3:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 3417.798 MHz
usb 3-5: new full-speed USB device number 3 using xhci_hcd
usb 3-5: New USB device found, idVendor=1b1c, idProduct=1b02
usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-5: Product: Corsair Vengeance K90 Keyboard
usb 3-5: Manufacturer: Corsair
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Corsair Corsair Vengeance K90 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/input/input5
hid-generic 0003:1B1C:1B02.0001: input,hidraw0: USB HID v1.11 Keyboard [Corsair Corsair Vengeance K90 Keyboard] on usb-0000:00:14.0-5/input0
input: Corsair Corsair Vengeance K90 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/input/input6
hid-generic 0003:1B1C:1B02.0002: input,hidraw1: USB HID v1.11 Device [Corsair Corsair Vengeance K90 Keyboard] on usb-0000:00:14.0-5/input1
input: Corsair Corsair Vengeance K90 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.2/input/input7
hid-generic 0003:1B1C:1B02.0003: input,hidraw2: USB HID v1.11 Keyboard [Corsair Corsair Vengeance K90 Keyboard] on usb-0000:00:14.0-5/input2
usb 3-6: new full-speed USB device number 4 using xhci_hcd
usb 3-6: New USB device found, idVendor=1b1c, idProduct=1b06
usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-6: Product: Corsair M95 Gaming Mouse
usb 3-6: Manufacturer: Corsair
input: Corsair Corsair M95 Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/input/input8
hid-generic 0003:1B1C:1B06.0004: input,hidraw3: USB HID v1.11 Mouse [Corsair Corsair M95 Gaming Mouse] on usb-0000:00:14.0-6/input0
input: Corsair Corsair M95 Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/input/input9
hid-generic 0003:1B1C:1B06.0005: input,hidraw4: USB HID v1.11 Keyboard [Corsair Corsair M95 Gaming Mouse] on usb-0000:00:14.0-6/input1
input: Corsair Corsair M95 Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.2/input/input10
hid-generic 0003:1B1C:1B06.0006: input,hidraw5: USB HID v1.11 Device [Corsair Corsair M95 Gaming Mouse] on usb-0000:00:14.0-6/input2
usb 3-14: new full-speed USB device number 5 using xhci_hcd
usb 3-14: New USB device found, idVendor=046d, idProduct=08d7
usb 3-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-14: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
Switched to clocksource tsc
raid6: sse2x1 12353 MB/s
raid6: sse2x2 15380 MB/s
raid6: sse2x4 17904 MB/s
raid6: avx2x1 23868 MB/s
raid6: avx2x2 27403 MB/s
raid6: avx2x4 32142 MB/s
raid6: using algorithm avx2x4 (32142 MB/s)
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 37918.000 MB/sec
bio: create slab at 1
Btrfs loaded
btrfs: device fsid 5a61d7b4-47a6-4a01-844c-976ddf568076 devid 1 transid 59662 /dev/sda2
btrfs: disk space caching is enabled
Btrfs detected SSD devices, enabling SSD mode
random: init urandom read with 80 bits of entropy available
random: nonblocking pool is initialized
Adding 6080564k swap on /dev/sdb5. Priority:-1 extents:1 across:6080564k SSFS
Adding 9764860k swap on /dev/sda1. Priority:-2 extents:1 across:9764860k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
btrfs: disk space caching is enabled
systemd-udevd[382]: starting version 204
wmi: Mapper loaded
EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[drm] Initialized drm 1.1.0 20060810
lp: driver loaded but no devices found
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
nvidia: module verification failed: signature and/or required key missing - tainting kernel
ppdev: user-space parallel port driver
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 346.22 Tue Dec 2 10:50:01 PST 2014
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
type=1400 audit(1422353906.260:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=473 comm="apparmor_parser"
type=1400 audit(1422353906.260:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=473 comm="apparmor_parser"
type=1400 audit(1422353906.260:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=473 comm="apparmor_parser"
type=1400 audit(1422353906.260:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=473 comm="apparmor_parser"
type=1400 audit(1422353906.260:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=473 comm="apparmor_parser"
type=1400 audit(1422353906.260:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=473 comm="apparmor_parser"
Linux video capture interface: v2.00
gspca_main: v2.14.0 registered
gspca_main: gspca_zc3xx-2.14.0 probing 046d:08d7
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
hda_codec: ALC1150: SKU not ready 0x00000000
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x00000000 for NID 0x1d
realtek: Enable default setup for auto mode as fallback
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
kvm: disabled by bios
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
hda-intel 0000:01:00.1: Enable delay in RIRB handling
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input19
btrfs: device fsid 5a61d7b4-47a6-4a01-844c-976ddf568076 devid 1 transid 59662 /dev/sda2
asus_wmi: Disabling ACPI video driver
type=1400 audit(1422353906.372:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=670 comm="apparmor_parser"
type=1400 audit(1422353906.372:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=670 comm="apparmor_parser"
type=1400 audit(1422353906.372:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=670 comm="apparmor_parser"
btrfs: device fsid 5a61d7b4-47a6-4a01-844c-976ddf568076 devid 1 transid 59662 /dev/sda2
init: cups main process (674) killed by HUP signal
init: cups main process ended, respawning
init: failsafe main process (710) killed by TERM signal
init: samba-ad-dc main process (767) terminated with status 1
type=1400 audit(1422353906.480:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=869 comm="apparmor_parser"
type=1400 audit(1422353906.480:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=869 comm="apparmor_parser"
type=1400 audit(1422353906.480:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="pxgsettings" pid=869 comm="apparmor_parser"
type=1400 audit(1422353906.480:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=869 comm="apparmor_parser"
type=1400 audit(1422353906.480:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=869 comm="apparmor_parser"
type=1400 audit(1422353906.480:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=869 comm="apparmor_parser"
type=1400 audit(1422353906.500:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="pxgsettings" pid=869 comm="apparmor_parser"
type=1400 audit(1422353906.500:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=869 comm="apparmor_parser"
type=1400 audit(1422353906.500:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=869 comm="apparmor_parser"
type=1400 audit(1422353906.500:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=870 comm="apparmor_parser"
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x4/0x5
inputs:
input: HDA NVidia HDMI as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
input: HDA NVidia HDMI as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
nvidia 0000:01:00.0: irq 47 for MSI/MSI-X
input: gspca_zc3xx as /devices/pci0000:00/0000:00:14.0/usb3/3-14/input/input22
usbcore: registered new interface driver gspca_zc3xx
usbcore: registered new interface driver snd-usb-audio
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1222) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit_printk_skb: 69 callbacks suppressed
type=1400 audit(1422353937.287:44): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2581 comm="apparmor_parser"
type=1400 audit(1422353937.287:45): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2581 comm="apparmor_parser"
type=1400 audit(1422353937.287:46): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2581 comm="apparmor_parser"
type=1400 audit(1422355258.927:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3107 comm="apparmor_parser"
type=1400 audit(1422355258.927:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3107 comm="apparmor_parser"
type=1400 audit(1422355258.927:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3107 comm="apparmor_parser"
NVRM: GPU at PCI:0000:01:00: GPU-d7c3e205-10cb-7180-f10f-35e47f4bab08
NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception on GPC 0: 2D MEMLAYOUT Violation. Coordinates: (0x680, 0x400)
NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x500420=0x80000200 0x500434=0x4000680 0x500438=0x2a 0x50043c=0x10000
NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception on GPC 3: 2D MEMLAYOUT Violation. Coordinates: (0x680, 0x410)
NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x518420=0x80000200 0x518434=0x4100680 0x518438=0x2a 0x51843c=0x10000
NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ChID 000c, Class 0000902d, Offset 0000010c, Data 00000000