dmesg - procesador
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-44-generic (buildd@komainu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #73-Ubuntu SMP Tue Dec 16 00:23:46 UTC 2014 (Ubuntu 3.13.0-44.73-generic 3.13.11-ckt12)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
Disabled fast string operations
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007ffdefff] usable
BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffbf] ACPI data
BIOS-e820: [mem 0x000000007fffffc0-0x000000007fffffff] ACPI NVS
BIOS-e820: [mem 0x00000000fec00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.3 present.
DMI: Acer Aspire 9500 /Stork, BIOS V1.70 02/27/2006
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7ffdf max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
[mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01b96000, 0x01b96fff] PGTABLE
RAMDISK: [mem 0x35c26000-0x36e0afff]
ACPI: RSDP 000e5010 000014 (v00 INSYDE)
ACPI: RSDT 7fff882b 000038 (v01 INSYDE RSDT_000 00000100 ABCD 00010200)
ACPI: FACP 7ffffac0 000074 (v01 INSYDE FACP_000 00000100 0000 00010200)
ACPI: DSDT 7fff8e90 006C24 (v01 COMPAL HDQ70 00000001 INTL 02002036)
ACPI: FACS 7fffffc0 000040
ACPI: APIC 7ffffb50 000066 (v01 STUPID MAPIC_00 30307830 ABCD 00010200)
ACPI: MCFG 7ffffbc0 00003C (v01 INSYDE MCFG_000 30303030 0000 30303030)
ACPI: SSDT 7fff8a3b 000235 (v01 PmRef Cpu0Ist 00003000 INTL 20030522)
ACPI: SSDT 7fff8863 0001D8 (v01 PmRef Cpu0Cst 00003001 INTL 20030522)
ACPI: Local APIC address 0xfee00000
1155MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
BRK [0x01b97000, 0x01b97fff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x7ffdefff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x7ffdefff]
On node 0 totalpages: 524157
free_area_init_node: node 0, pgdat c199d580, node_mem_map f4c26020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3998 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 224254 pages, LIFO batch:31
HighMem zone: 2312 pages used for memmap
HighMem zone: 295905 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24])
I/O APIC 0xfec10000 registers return all ones, skipping!
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0x80000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7be4000 s36096 r0 d21248 u57344
pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522373
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 4194032 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0007ffdf)
Memory: 2044976K/2096628K available (6547K kernel code, 640K rwdata, 2764K rodata, 876K init, 924K bss, 51652K reserved, 1183620K highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc19bb000 - 0xc1a96000 ( 876 kB)
.data : 0xc1664ff4 - 0xc19ba3c0 (3412 kB)
.text : 0xc1000000 - 0xc1664ff4 (6547 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
NR_IRQS:2304 nr_irqs:256 16
CPU 0 irqstacks, hard=f7008000 soft=f700a000
Console: colour dummy device 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 1728.897 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.79 BogoMIPS (lpj=6915588)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
Disabled fast string operations
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (c1a96000 - c1a9e000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27841 entries in 55 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) M processor 1.73GHz (fam: 06, model: 0d, stepping: 08)
Performance Events: p6 PMU driver.
... version: 0
... bit width: 32
... generic registers: 2
... value mask: 00000000ffffffff
... max period: 000000007fffffff
... fixed-purpose events: 0
... event mask: 0000000000000003
x86: Booted up 1 node, 1 CPUs
smpboot: Total of 1 processors activated (3457.79 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
PM: Registering ACPI NVS region [mem 0x7fffffc0-0x7fffffff] (64 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 15:26:41, date: 01/21/15
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
PCI: PCI BIOS revision 2.10 entry at 0xea8a4, last bus=6
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: ACPI Dock Station Driver: 2 docks/bays found
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
PCI: root bus 00: using default resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
pci 0000:00:01.0: [8086:2591] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd0000000-0xd0003fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:2662] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x1200-0x121f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x1220-0x123f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x1240-0x125f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0x1260-0x127f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0x00000000-0x000003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io 0x1300-0x133f] claimed by ICH6 GPIO
pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at ff00-ff7f
pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x20: [io 0x1100-0x110f]
pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0x1400-0x141f]
pci 0000:01:00.0: [1002:5653] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0x90000000-0x97ffffff pref]
pci 0000:01:00.0: reg 0x14: [io 0xc000-0xc0ff]
pci 0000:01:00.0: reg 0x18: [mem 0xc0000000-0xc000ffff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff]
pci 0000:00:01.0: bridge window [mem 0x90000000-0x9fffffff pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02-04]
pci 0000:00:1c.0: bridge window [io 0xa000-0xbfff]
pci 0000:00:1c.0: bridge window [mem 0xb8000000-0xbfffffff]
pci 0000:00:1c.0: bridge window [mem 0x88000000-0x8fffffff 64bit pref]
acpiphp: Slot [1-1] registered
pci 0000:00:1c.1: PCI bridge to [bus 0c]
pci 0000:00:1c.1: bridge window [io 0x8000-0x9fff]
pci 0000:00:1c.1: bridge window [mem 0xb4000000-0xb7ffffff]
pci 0000:00:1c.1: bridge window [mem 0x84000000-0x87ffffff 64bit pref]
pci 0000:06:00.0: [104c:8026] type 00 class 0x0c0010
pci 0000:06:00.0: reg 0x10: [mem 0xb0002800-0xb0002fff]
pci 0000:06:00.0: reg 0x14: [mem 0xb0004000-0xb0007fff]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:06:01.0: [10ec:8169] type 00 class 0x020000
pci 0000:06:01.0: reg 0x10: [io 0x6000-0x60ff]
pci 0000:06:01.0: reg 0x14: [mem 0xb0002000-0xb00020ff]
pci 0000:06:01.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:06:01.0: supports D1 D2
pci 0000:06:01.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:06:01.0: System wakeup disabled by ACPI
pci 0000:06:02.0: [8086:4220] type 00 class 0x028000
pci 0000:06:02.0: reg 0x10: [mem 0xb0001000-0xb0001fff]
pci 0000:06:02.0: PME# supported from D0 D3hot D3cold
pci 0000:06:04.0: [1524:1412] type 02 class 0x060700
pci 0000:06:04.0: reg 0x10: [mem 0x00000000-0x00000fff]
pci 0000:06:04.0: supports D1 D2
pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:04.1: [1524:0530] type 00 class 0x050100
pci 0000:06:04.1: reg 0x10: [mem 0xb0000000-0xb000007f]
pci 0000:06:04.1: supports D1 D2
pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.2: [1524:0550] type 00 class 0x080501
pci 0000:06:04.2: reg 0x10: [mem 0xb0000100-0xb00001ff]
pci 0000:06:04.2: supports D1 D2
pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.3: [1524:0520] type 00 class 0x050100
pci 0000:06:04.3: reg 0x10: [mem 0xb0000200-0xb000027f]
pci 0000:06:04.3: supports D1 D2
pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.4: [1524:0551] type 00 class 0x050100
pci 0000:06:04.4: reg 0x10: [mem 0x00000000-0x000000ff]
pci 0000:06:04.4: supports D1 D2
pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x6000-0x7fff]
pci 0000:00:1e.0: bridge window [mem 0xb0000000-0xb3ffffff]
pci 0000:00:1e.0: bridge window [mem 0x80000000-0x83ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci 0000:06:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 06] (conflicts with (null) [bus 06])
pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 0a
pci_bus 0000:07: busn_res: can not insert [bus 07-0a] under [bus 06] (conflicts with (null) [bus 06])
pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7ffdf000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xf0008000-0xf000bfff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:04: [io 0x0600-0x060f] has been reserved
system 00:04: [io 0x0680-0x06ff] has been reserved
system 00:04: [io 0x0800-0x080f] has been reserved
system 00:04: [io 0x1000-0x107f] could not be reserved
system 00:04: [io 0x1180-0x11bf] has been reserved
system 00:04: [io 0x1640-0x164f] has been reserved
system 00:04: [io 0xff2c-0xff2f] has been reserved
system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
system 00:04: [mem 0xf0008000-0xf000bfff] has been reserved
system 00:04: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [dma 2]
pnp 00:06: Plug and Play ACPI device, IDs SMCf010 (active)
pnp 00:07: [dma 3]
pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: Plug and Play ACPI device, IDs SYN0703 SYN0701 SYN0700 SYN0002 PNP0f13 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
pci 0000:00:1d.7: BAR 0: assigned [mem 0xa0000000-0xa00003ff]
pci 0000:01:00.0: BAR 6: assigned [mem 0x98000000-0x9801ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff]
pci 0000:00:01.0: bridge window [mem 0x90000000-0x9fffffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-04]
pci 0000:00:1c.0: bridge window [io 0xa000-0xbfff]
pci 0000:00:1c.0: bridge window [mem 0xb8000000-0xbfffffff]
pci 0000:00:1c.0: bridge window [mem 0x88000000-0x8fffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 0c]
pci 0000:00:1c.1: bridge window [io 0x8000-0x9fff]
pci 0000:00:1c.1: bridge window [mem 0xb4000000-0xb7ffffff]
pci 0000:00:1c.1: bridge window [mem 0x84000000-0x87ffffff 64bit pref]
pci 0000:06:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:06:04.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
pci 0000:06:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:06:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:06:04.0: BAR 0: assigned [mem 0xa4000000-0xa4000fff]
pci 0000:06:04.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
pci 0000:06:04.0: BAR 16: assigned [mem 0xa8000000-0xabffffff]
pci 0000:06:01.0: BAR 6: assigned [mem 0xb0020000-0xb003ffff pref]
pci 0000:06:04.0: BAR 13: assigned [io 0x6400-0x64ff]
pci 0000:06:04.0: BAR 14: assigned [io 0x6800-0x68ff]
pci 0000:06:04.4: BAR 0: assigned [mem 0xb0000300-0xb00003ff]
pci 0000:06:04.0: CardBus bridge to [bus 07-0a]
pci 0000:06:04.0: bridge window [io 0x6400-0x64ff]
pci 0000:06:04.0: bridge window [io 0x6800-0x68ff]
pci 0000:06:04.0: bridge window [mem 0x80000000-0x83ffffff pref]
pci 0000:06:04.0: bridge window [mem 0xa8000000-0xabffffff]
pci 0000:00:1e.0: PCI bridge to [bus 06]
pci 0000:00:1e.0: bridge window [io 0x6000-0x7fff]
pci 0000:00:1e.0: bridge window [mem 0xb0000000-0xb3ffffff]
pci 0000:00:1e.0: bridge window [mem 0x80000000-0x83ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xc0000000-0xcfffffff]
pci_bus 0000:01: resource 2 [mem 0x90000000-0x9fffffff pref]
pci_bus 0000:02: resource 0 [io 0xa000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xb8000000-0xbfffffff]
pci_bus 0000:02: resource 2 [mem 0x88000000-0x8fffffff 64bit pref]
pci_bus 0000:0c: resource 0 [io 0x8000-0x9fff]
pci_bus 0000:0c: resource 1 [mem 0xb4000000-0xb7ffffff]
pci_bus 0000:0c: resource 2 [mem 0x84000000-0x87ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x6000-0x7fff]
pci_bus 0000:06: resource 1 [mem 0xb0000000-0xb3ffffff]
pci_bus 0000:06: resource 2 [mem 0x80000000-0x83ffffff 64bit pref]
pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:07: resource 0 [io 0x6400-0x64ff]
pci_bus 0000:07: resource 1 [io 0x6800-0x68ff]
pci_bus 0000:07: resource 2 [mem 0x80000000-0x83ffffff pref]
pci_bus 0000:07: resource 3 [mem 0xa8000000-0xabffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:1d.7: enabling device (0000 -> 0002)
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS mismatch (16 != 32), using 64 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18324K (f5c26000 - f6e0b000)
microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1421854001.844:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1718
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1152x864x32, linelength=4608, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0x90000000, mapped to 0xf8480000, using 3904k, total 3904k
Console: switching to colour frame buffer device 144x54
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 13
ipmi message handler version 39.2
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ACAD] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xa0000000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-44-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001200
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-44-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001220
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-44-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001240
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-44-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001260
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-44-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 221a5ee8b665d05558a1dee8e31bf16eb8df8fd8'
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Key type trusted registered
isapnp: No Plug & Play device found
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 15:511:437
rtc_cmos 00:05: setting system clock to 2015-01-21 15:26:42 UTC (1421854002)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata1.00: ATA-6: ST9808210A, 3.01, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48
ata1.01: ATAPI: MATSHITAUJ-845D, D100, max UDMA/33
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery present)
scsi 0:0:0:0: Direct-Access ATA ST9808210A 3.01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sda: sda1 sda2 sda3 sda4
scsi 0:0:1:0: CD-ROM MATSHITA UJ-845D D100 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sr 0:0:1:0: Attached scsi generic sg1 type 5
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 876K (c19bb000 - c1a96000)
Write protecting the kernel text: 6548k
Write protecting the kernel read-only data: 2772k
NX-protecting the kernel data: 5740k
systemd-udevd[96]: starting version 204
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1)
sdhci-pci 0000:06:04.2: dummy supplies not allowed
mmc0: no vqmmc regulator found
sdhci-pci 0000:06:04.2: dummy supplies not allowed
mmc0: no vmmc regulator found
mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO
sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1)
sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002)
sdhci-pci 0000:06:04.4: dummy supplies not allowed
mmc1: no vqmmc regulator found
sdhci-pci 0000:06:04.4: dummy supplies not allowed
mmc1: no vmmc regulator found
mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:06:01.0 (unregistered net_device): not PCI Express
r8169 0000:06:01.0 eth0: RTL8169sb/8110sb at 0xf841a000, 00:0f:b0:92:e4:75, XID 10000000 IRQ 21
r8169 0000:06:01.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
firewire_ohci 0000:06:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
firewire_core 0000:06:00.0: created device fw0: GUID 00023f587b4028e8, S400
psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000/0x0, board id: 3655, fw id: 41763
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
random: nonblocking pool is initialized
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 2373628k swap on /dev/sda4. Priority:-1 extents:1 across:2373628k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[259]: starting version 204
ACPI : EC: GPE storm detected(9 GPEs), transactions will use polling mode
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input13
lp0: using parport0 (interrupt-driven).
cfg80211: Calling CRDA to update world regulatory domain
NET: Registered protocol family 23
intel_rng: FWH not detected
type=1400 audit(1421854019.263:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=327 comm="apparmor_parser"
type=1400 audit(1421854019.263:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=327 comm="apparmor_parser"
type=1400 audit(1421854019.263:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=327 comm="apparmor_parser"
type=1400 audit(1421854019.267:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=327 comm="apparmor_parser"
type=1400 audit(1421854019.267:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=327 comm="apparmor_parser"
type=1400 audit(1421854019.267:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=327 comm="apparmor_parser"
found SMC SuperIO Chip (devid=0x7a rev=00 base=0x002e): LPC47N227
smsc_superio_flat(): fir: 0x230, sir: 0x2f8, dma: 02, irq: 3, mode: 0x0e
smsc_ircc_present: can't get sir_base of 0x2f8
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
[drm] Initialized drm 1.1.0 20060810
libipw: 802.11 data/management/control stack, git-1.1.13
libipw: Copyright (C) 2004-2005 Intel Corporation
yenta_cardbus 0000:06:04.0: CardBus bridge found [1025:007f]
yenta_cardbus 0000:06:04.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:06:04.0: TI: mfunc 0x89501212, devctl 0x44
ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00001330-0x0000133f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00001300-0x0000132f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0c78, PCI irq 16
yenta_cardbus 0000:06:04.0: Socket status: 30000006
pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #06 to #0a
yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [io 0x6000-0x7fff]
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x6000-0x7fff:
excluding 0x6000-0x60ff 0x6400-0x64ff 0x6800-0x68ff
yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0xb0000000-0xb3ffffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xb0000000-0xb3ffffff:
excluding 0xb0000000-0xb03fffff
yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff 64bit pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff:
excluding 0x80000000-0x83ffffff
[drm] radeon kernel modesetting enabled.
checking generic (90000000 3d0000) vs hw (90000000 8000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RV410 0x1002:0x5653 0x1025:0x007F).
[drm] register mmio base: 0xC0000000
[drm] register mmio size: 65536
ATOM BIOS: Acer
[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:01:00.0: VRAM: 128M 0x0000000090000000 - 0x0000000097FFFFFF (128M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000070000000 - 0x000000008FFFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 440294 kiB
[TTM] Zone highmem: Available graphics memory: 1032104 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 128M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled (table at 0x0000000090040000).
[drm] radeon: 2 quad pipes, 1 z pipes initialized.
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000070000000 and cpu addr 0xffcb2000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 43 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[drm] radeon: irq initialized.
[drm] Loading R400 Microcode
[drm] radeon: ring at 0x0000000070001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] LVDS-1
[drm] DDC: 0x1a8 0x1a8 0x1ac 0x1ac 0x1b0 0x1b0 0x1b4 0x1b4
[drm] Encoders:
[drm] LCD1: INTERNAL_LVDS
[drm] Connector 2:
[drm] SVIDEO-1
[drm] Encoders:
[drm] TV1: INTERNAL_DAC2
[drm] Connector 3:
[drm] DVI-D-1
[drm] HPD1
[drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[drm] Encoders:
[drm] DFP1: INTERNAL_TMDS1
[drm] Possible max6649 thermal controller at 0x00
i2c i2c-2: Invalid 7-bit I2C address 0x00
[drm] radeon: power management initialized
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x37f
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
excluding 0x3f0-0x3f7 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
clean.
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xcffff 0xe0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
excluding 0xa0000000-0xa00fffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
excluding 0x60000000-0x60ffffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
clean.
[drm] fb mappable at 0x900C0000
[drm] vram apper at 0x90000000
[drm] size 5185536
[drm] fb depth is 24
[drm] pitch is 5760
fbcon: radeondrmfb (fb0) is primary device
ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
init: failsafe main process (508) killed by TERM signal
autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0) type:line
speaker_outs=1 (0x11/0x0/0x0/0x0/0x0)
hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x18/0x0
inputs:
Mic=0x12
Line=0x14
CD=0x16
realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x17
realtek: Enable default setup for auto mode as fallback
Console: switching to colour frame buffer device 180x56
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
type=1400 audit(1421854025.063:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=667 comm="apparmor_parser"
type=1400 audit(1421854025.063:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=667 comm="apparmor_parser"
type=1400 audit(1421854025.063:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=667 comm="apparmor_parser"
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: cups main process (668) killed by HUP signal
init: cups main process ended, respawning
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
r8169 0000:06:01.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
type=1400 audit(1421854027.799:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=818 comm="apparmor_parser"
type=1400 audit(1421854027.799:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=818 comm="apparmor_parser"
type=1400 audit(1421854027.799:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=818 comm="apparmor_parser"
type=1400 audit(1421854027.803:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=819 comm="apparmor_parser"
type=1400 audit(1421854027.803:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=819 comm="apparmor_parser"
type=1400 audit(1421854027.803:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=819 comm="apparmor_parser"
type=1400 audit(1421854027.803:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=819 comm="apparmor_parser"
lib80211_crypt: registered algorithm 'CCMP'
lib80211_crypt: registered algorithm 'TKIP'
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
audit_printk_skb: 132 callbacks suppressed
type=1400 audit(1421854055.710:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2179 comm="apparmor_parser"
type=1400 audit(1421854055.710:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2179 comm="apparmor_parser"
type=1400 audit(1421854055.714:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2179 comm="apparmor_parser"
usb 4-1: new low-speed USB device number 2 using uhci_hcd
usb 4-1: New USB device found, idVendor=0458, idProduct=003a
usb 4-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 4-1: Product: Optical Mouse
usb 4-1: Manufacturer: Genius
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input14
hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1d.2-1/input0
systemd-hostnamed[3417]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 1-3: new high-speed USB device number 3 using ehci-pci
usb 1-3: New USB device found, idVendor=0951, idProduct=1624
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: DataTraveler G2
usb 1-3: Manufacturer: Kingston
usb 1-3: SerialNumber: 000D88277275B9A0B5A70228
usb-storage 1-3:1.0: USB Mass Storage device detected
scsi2 : usb-storage 1-3:1.0
usbcore: registered new interface driver usb-storage
scsi 2:0:0:0: Direct-Access Kingston DataTraveler G2 PMAP PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdb] 7833600 512-byte logical blocks: (4.01 GB/3.73 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] No Caching mode page found
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] No Caching mode page found
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] No Caching mode page found
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
systemd-hostnamed[4029]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
perf samples too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature above threshold, cpu clock throttled (total events = 633)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
ipw2200: Failed to send ASSOCIATE: Already sending a command.
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
usb 1-3: USB disconnect, device number 3
perf samples too long (5061 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
systemd-hostnamed[3274]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!