dmesg - xonotic
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@batsu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 (Ubuntu 3.13.0-24.47-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4c00-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7dbfff] ACPI NVS
BIOS-e820: [mem 0x00000000bf7dc000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000063fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/P6X58D PREMIUM, BIOS 0703 02/24/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x640000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E3FFF write-protect
E4000-EBFFF write-through
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask E00000000 write-back
2 base 600000000 mask FC0000000 write-back
3 base 0C0000000 mask FC0000000 uncachable
4 base 0BF800000 mask FFF800000 uncachable
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 8GB, type WB
reg 2, base: 24GB, range: 1GB, type WB
reg 3, base: 3GB, range: 1GB, type UC
reg 4, base: 3064MB, range: 8MB, type UC
total RAM covered: 24568M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 8GB, type WB
reg 6, base: 24GB, range: 1GB, type WB
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x63fe00000-0x63fffffff]
[mem 0x63fe00000-0x63fffffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x63c000000-0x63fdfffff]
[mem 0x63c000000-0x63fdfffff] page 2M
init_memory_mapping: [mem 0x600000000-0x63bffffff]
[mem 0x600000000-0x63bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbf77ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbf5fffff] page 2M
[mem 0xbf600000-0xbf77ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x5ffffffff]
[mem 0x100000000-0x5ffffffff] page 2M
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
RAMDISK: [mem 0x3490a000-0x3647cfff]
ACPI: RSDP 00000000000fba70 000024 (v02 ACPIAM)
ACPI: XSDT 00000000bf780100 00005C (v01 022410 XSDT1223 20100224 MSFT 00000097)
ACPI: FACP 00000000bf780290 0000F4 (v03 022410 FACP1223 20100224 MSFT 00000097)
ACPI: DSDT 00000000bf7804b0 00B003 (v01 A1382 A1382001 00000001 INTL 20060113)
ACPI: FACS 00000000bf798000 000040
ACPI: APIC 00000000bf780390 0000D8 (v01 022410 APIC1223 20100224 MSFT 00000097)
ACPI: MCFG 00000000bf780470 00003C (v01 022410 OEMMCFG 20100224 MSFT 00000097)
ACPI: OEMB 00000000bf798040 000072 (v01 022410 OEMB1223 20100224 MSFT 00000097)
ACPI: HPET 00000000bf78f4b0 000038 (v01 022410 OEMHPET 20100224 MSFT 00000097)
ACPI: OSFR 00000000bf78f4f0 0000B0 (v01 022410 OEMOSFR 20100224 MSFT 00000097)
ACPI: SSDT 00000000bf799ee0 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000063fffffff]
Initmem setup node 0 [mem 0x00000000-0x63fffffff]
NODE_DATA [mem 0x63ffe6000-0x63ffeafff]
[ffffea0000000000-ffffea0018ffffff] PMD -> [ffff880627600000-ffff88063f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x63fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xbf77ffff]
node 0: [mem 0x100000000-0x63fffffff]
On node 0 totalpages: 6289180
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12190 pages used for memmap
DMA32 zone: 780160 pages, LIFO batch:31
Normal zone: 86016 pages used for memmap
Normal zone: 5505024 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e4fff]
PM: Registered nosave memory: [mem 0x000e5000-0x000fffff]
PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff]
PM: Registered nosave memory: [mem 0xbf798000-0xbf7dbfff]
PM: Registered nosave memory: [mem 0xbf7dc000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88063fc00000 s86336 r8192 d24256 u131072
pcpu-alloc: s86336 r8192 d24256 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6190889
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 24650776K/25156720K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 505944K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-15.
NR_IRQS:16640 nr_irqs:1216 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 100663296 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2806.553 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5613.10 BogoMIPS (lpj=11226212)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz (fam: 06, model: 1a, stepping: 05)
APIC calibration not consistent with PM-Timer: 139ms instead of 100ms
APIC delta adjusted to PM-Timer: 835226 (1169306)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (44904.84 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7dbfff] (278528 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 0:59:07, date: 01/01/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000bf7980c0 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x8800-0x881f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x8880-0x889f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0x8c00-0x8c1f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf7dff000-0xf7dff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7df8000-0xf7dfbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x8080-0x809f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x8400-0x841f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x8480-0x849f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf7dfe000-0xf7dfe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x7c00-0x7c07]
pci 0000:00:1f.2: reg 0x14: [io 0x7880-0x7883]
pci 0000:00:1f.2: reg 0x18: [io 0x7800-0x7807]
pci 0000:00:1f.2: reg 0x1c: [io 0x7480-0x7483]
pci 0000:00:1f.2: reg 0x20: [io 0x7400-0x741f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7dfc000-0xf7dfc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7dfd000-0xf7dfd0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
pci 0000:01:00.0: [1b4b:9123] type 00 class 0x010601
pci 0000:01:00.0: reg 0x10: [io 0x9c00-0x9c07]
pci 0000:01:00.0: reg 0x14: [io 0x9880-0x9883]
pci 0000:01:00.0: reg 0x18: [io 0x9800-0x9807]
pci 0000:01:00.0: reg 0x1c: [io 0x9480-0x9483]
pci 0000:01:00.0: reg 0x20: [io 0x9400-0x940f]
pci 0000:01:00.0: reg 0x24: [mem 0xf7eff800-0xf7efffff]
pci 0000:01:00.0: reg 0x30: [mem 0xf7ee0000-0xf7eeffff pref]
pci 0000:01:00.0: PME# supported from D3hot
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xf7ffe000-0xf7ffffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:03:00.0: [10de:1244] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xf8000000-0xf9ffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xd4000000-0xd7ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io 0xac00-0xac7f]
pci 0000:03:00.0: reg 0x30: [mem 0xfba00000-0xfba7ffff pref]
pci 0000:03:00.1: [10de:0bee] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfbafc000-0xfbafffff]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbafffff]
pci 0000:00:03.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [1b4b:9235] type 00 class 0x010601
pci 0000:05:00.0: reg 0x10: [io 0xbc00-0xbc07]
pci 0000:05:00.0: reg 0x14: [io 0xb880-0xb883]
pci 0000:05:00.0: reg 0x18: [io 0xb800-0xb807]
pci 0000:05:00.0: reg 0x1c: [io 0xb480-0xb483]
pci 0000:05:00.0: reg 0x20: [io 0xb400-0xb41f]
pci 0000:05:00.0: reg 0x24: [mem 0xfbbff800-0xfbbfffff]
pci 0000:05:00.0: reg 0x30: [mem 0xfbbe0000-0xfbbeffff pref]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:00:09.0: PCI bridge to [bus 05]
pci 0000:00:09.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:09.0: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.0: PCI bridge to [bus 08]
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:07:00.0: [11ab:4364] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [mem 0xfbdfc000-0xfbdfffff 64bit]
pci 0000:07:00.0: reg 0x18: [io 0xd800-0xd8ff]
pci 0000:07:00.0: reg 0x30: [mem 0xfbdc0000-0xfbddffff pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:06:00.0: [11ab:4364] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xfbcfc000-0xfbcfffff 64bit]
pci 0000:06:00.0: reg 0x18: [io 0xc800-0xc8ff]
pci 0000:06:00.0: reg 0x30: [mem 0xfbcc0000-0xfbcdffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 06]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:09:02.0: [1106:3044] type 00 class 0x0c0010
pci 0000:09:02.0: reg 0x10: [mem 0xfbeff000-0xfbeff7ff]
pci 0000:09:02.0: reg 0x14: [io 0xec00-0xec7f]
pci 0000:09:02.0: supports D2
pci 0000:09:02.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0290-0x029f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x0800-0x087f] could not be reserved
system 00:06: [io 0x0500-0x057f] could not be reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 400000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbafffff]
pci 0000:00:03.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:09.0: PCI bridge to [bus 05]
pci 0000:00:09.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:09.0: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.0: PCI bridge to [bus 08]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 06]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 09]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:02: resource 1 [mem 0xf7f00000-0xf7ffffff]
pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
pci_bus 0000:03: resource 1 [mem 0xf8000000-0xfbafffff]
pci_bus 0000:03: resource 2 [mem 0xd4000000-0xdfffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:08: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:08: resource 1 [mem 0xc0000000-0xc03fffff]
pci_bus 0000:08: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:07: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:06: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:06: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0xe000-0xefff]
pci_bus 0000:09: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:09: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:09: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Boot video device
PCI: CLS 256 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 28108K (ffff88003490a000 - ffff88003647d000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
microcode: CPU0 sig=0x106a5, pf=0x2, revision=0xf
microcode: CPU1 sig=0x106a5, pf=0x2, revision=0xf
microcode: CPU2 sig=0x106a5, pf=0x2, revision=0xf
microcode: CPU3 sig=0x106a5, pf=0x2, revision=0xf
microcode: CPU4 sig=0x106a5, pf=0x2, revision=0xf
microcode: CPU5 sig=0x106a5, pf=0x2, revision=0xf
microcode: CPU6 sig=0x106a5, pf=0x2, revision=0xf
microcode: CPU7 sig=0x106a5, pf=0x2, revision=0xf
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1420073947.720:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 32768
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 65 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 66 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xf7dff000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7dfe000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00008800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00008880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00008c00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00008080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008480
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
xhci_hcd 0000:02:00.0: irq 67 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 68 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 69 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 70 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 71 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 74 for MSI/MSI-X
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb9: SerialNumber: 0000:02:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10
usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb10: SerialNumber: 0000:02:00.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 15:480:960
memory memory11: hash matches
rtc_cmos 00:02: setting system clock to 2015-01-01 00:59:08 UTC (1420073948)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[165]: starting version 204
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 75 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
sky2: driver version 1.30
sky2 0000:07:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:07:00.0: irq 76 for MSI/MSI-X
sky2 0000:07:00.0 eth0: addr 48:5b:39:45:04:35
sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:06:00.0: irq 77 for MSI/MSI-X
sky2 0000:06:00.0 eth1: addr 48:5b:39:44:fc:46
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7dfc000 port 0xf7dfc100 irq 75
ata2: SATA max UDMA/133 abar m2048@0xf7dfc000 port 0xf7dfc180 irq 75
ata3: SATA max UDMA/133 abar m2048@0xf7dfc000 port 0xf7dfc200 irq 75
ata4: SATA max UDMA/133 abar m2048@0xf7dfc000 port 0xf7dfc280 irq 75
ata5: SATA max UDMA/133 abar m2048@0xf7dfc000 port 0xf7dfc300 irq 75
ata6: SATA max UDMA/133 abar m2048@0xf7dfc000 port 0xf7dfc380 irq 75
ahci 0000:01:00.0: irq 78 for MSI/MSI-X
ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
ahci 0000:01:00.0: port 0 can do FBS, forcing FBSCP
ahci 0000:01:00.0: port 1 can do FBS, forcing FBSCP
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7eff900 irq 78
ata8: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7eff980 irq 78
ahci 0000:05:00.0: irq 79 for MSI/MSI-X
ahci 0000:05:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi8 : ahci
scsi9 : ahci
scsi10 : ahci
scsi11 : ahci
ata9: SATA max UDMA/133 abar m2048@0xfbbff800 port 0xfbbff900 irq 79
ata10: SATA max UDMA/133 abar m2048@0xfbbff800 port 0xfbbff980 irq 79
ata11: SATA max UDMA/133 abar m2048@0xfbbff800 port 0xfbbffa00 irq 79
ata12: SATA max UDMA/133 abar m2048@0xfbbff800 port 0xfbbffa80 irq 79
firewire_ohci 0000:09:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
ata8: SATA link down (SStatus 0 SControl 370)
ata7: SATA link down (SStatus 0 SControl 370)
ata11: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
usb 1-3: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usb 1-3: New USB device found, idVendor=2109, idProduct=0811
usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-3: Product: USB2.0 Hub
ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9.00: ATA-9: M4-CT256M4SSD2, 000F, max UDMA/100
ata9.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata9.00: configured for UDMA/100
firewire_core 0000:09:02.0: created device fw0: GUID 001e8c0000d54c24, S400
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-6: new high-speed USB device number 4 using ehci-pci
tsc: Refined TSC clocksource calibration: 2806.363 MHz
md: bind
md: bind
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
md: bind
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 5-1: new low-speed USB device number 2 using uhci_hcd
md: bind
md: raid0 personality registered for level 0
md/raid0:md2: md_size is 125852928 sectors.
md: RAID0 configuration for md2 - 1 zone
md: zone0=[sda2/sdb2]
zone-offset= 0KB, device-offset= 0KB, size= 62926464KB
md2: detected capacity change from 0 to 64436699136
md: bind
md2: unknown partition table
md/raid0:md3: md_size is 125852928 sectors.
md: RAID0 configuration for md3 - 1 zone
md: zone0=[sda3/sdb3]
zone-offset= 0KB, device-offset= 0KB, size= 62926464KB
md3: detected capacity change from 0 to 64436699136
md: bind
md3: unknown partition table
md/raid0:md5: md_size is 3355463936 sectors.
md: RAID0 configuration for md5 - 1 zone
md: zone0=[sda5/sdb5]
zone-offset= 0KB, device-offset= 0KB, size=1677731968KB
md5: detected capacity change from 0 to 1717997535232
md5: unknown partition table
usb 5-1: New USB device found, idVendor=045e, idProduct=078c
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB Keyboard
usb 5-1: Manufacturer: LITEON Technology
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input5
hid-generic 0003:045E:078C.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:00:1a.2-1/input0
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: ATAPI iHAS424 Y, ZL1U, max UDMA/100
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM ATAPI iHAS424 Y ZL1U PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
usb 7-2: new full-speed USB device number 2 using uhci_hcd
Switched to clocksource tsc
usb 7-2: New USB device found, idVendor=1a7c, idProduct=0191
usb 7-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 7-2: Product: Evoluent VerticalMouse 4
input: Evoluent VerticalMouse 4 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input6
hid-generic 0003:1A7C:0191.0002: input,hidraw1: USB HID v1.11 Mouse [Evoluent VerticalMouse 4] on usb-0000:00:1d.1-2/input0
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
ata4.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
random: nonblocking pool is initialized
sdc: sdc1 sdc2 sdc3
sd 3:0:0:0: [sdc] Attached SCSI disk
usb 10-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 10-1: Parent hub missing LPM exit latency info. Power management will be impacted.
usb 10-1: New USB device found, idVendor=2109, idProduct=0811
usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 10-1: Product: 4-Port USB 3.0 Hub
usb 10-1: Manufacturer: VIA Labs, Inc.
hub 10-1:1.0: USB hub found
hub 10-1:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 5 using ehci-pci
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: TSSTcorp CDDVDW SH-S223Q, SB00, max UDMA/100
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223Q SB00 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 4:0:0:0: Attached scsi CD-ROM sr1
sr 4:0:0:0: Attached scsi generic sg4 type 5
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
ata6: SATA link down (SStatus 0 SControl 300)
scsi 8:0:0:0: Direct-Access ATA M4-CT256M4SSD2 000F PQ: 0 ANSI: 5
sd 8:0:0:0: [sdd] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 8:0:0:0: Attached scsi generic sg5 type 0
sd 8:0:0:0: [sdd] Write Protect is off
sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1 sdd2
sd 8:0:0:0: [sdd] Attached SCSI disk
hid-generic 0003:051D:0002.0003: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid1 personality registered for level 1
raid6: sse2x1 7235 MB/s
raid6: sse2x2 8488 MB/s
raid6: sse2x4 9455 MB/s
raid6: using algorithm sse2x4 (9455 MB/s)
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 12713.000 MB/sec
generic_sse: 11116.000 MB/sec
xor: using function: prefetch64-sse (12713.000 MB/sec)
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
EXT4-fs (sdd2): re-mounted. Opts: errors=remount-ro
systemd-udevd[527]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
snd_hda_intel 0000:00:1b.0: irq 80 for MSI/MSI-X
EXT4-fs (md5): mounted filesystem with ordered data mode. Opts: (null)
SKU: Nid=0x1d sku_cfg=0x4005e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
hda_intel: Disabling MSI
hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:03:00.1: Disabling 64bit DMA
nvidia: module verification failed: signature and/or required key missing - tainting kernel
hda-intel 0000:03:00.1: Enable delay in RIRB handling
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
device-mapper: multipath: version 1.6.0 loaded
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:03:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.113 Mon Dec 1 21:08:13 PST 2014
EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc3): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (1120) killed by TERM signal
init: samba-ad-dc main process (1155) terminated with status 1
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (1278) killed by HUP signal
init: cups main process ended, respawning
sky2 0000:07:00.0 eth0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 0000:06:00.0 eth1: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1772) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
nvidia 0000:03:00.0: irq 81 for MSI/MSI-X
vboxdrv: Found 8 processor cores.
vboxdrv: fAsync=0 offMin=0x2dc offMax=0x2478
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
vboxpci: IOMMU not found (not registered)
sky2 0000:07:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: plymouth-stop pre-start process (2205) terminated with status 1
perf samples too long (2797 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
usb 1-6: USB disconnect, device number 4
usb 1-6.2: USB disconnect, device number 5
usb 1-6: new high-speed USB device number 6 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 7 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0004: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 6
usb 1-6.2: USB disconnect, device number 7
usb 1-6: new high-speed USB device number 8 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 9 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0005: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 8
usb 1-6.2: USB disconnect, device number 9
usb 1-6: new high-speed USB device number 10 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 11 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0006: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 10
usb 1-6.2: USB disconnect, device number 11
usb 1-6: new high-speed USB device number 12 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 13 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0007: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 12
usb 1-6.2: USB disconnect, device number 13
usb 1-6: new high-speed USB device number 14 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 15 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0008: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 14
usb 1-6.2: USB disconnect, device number 15
usb 1-6: new high-speed USB device number 16 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 17 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0009: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 16
usb 1-6.2: USB disconnect, device number 17
usb 1-6: new high-speed USB device number 18 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 19 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.000A: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 18
usb 1-6.2: USB disconnect, device number 19
usb 1-6: new high-speed USB device number 20 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 21 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.000B: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 20
usb 1-6.2: USB disconnect, device number 21
usb 1-6: new high-speed USB device number 22 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 23 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.000C: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 22
usb 1-6.2: USB disconnect, device number 23
usb 1-6: new high-speed USB device number 24 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 25 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.000D: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
perf samples too long (5196 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
do_IRQ: 1.39 No irq handler for vector (irq -1)
do_IRQ: 1.120 No irq handler for vector (irq -1)
do_IRQ: 3.59 No irq handler for vector (irq -1)
usb 1-6: USB disconnect, device number 24
usb 1-6.2: USB disconnect, device number 25
usb 1-6: new high-speed USB device number 26 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 27 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.000E: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 26
usb 1-6.2: USB disconnect, device number 27
usb 1-6: new high-speed USB device number 28 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 29 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.000F: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 28
usb 1-6.2: USB disconnect, device number 29
usb 1-6: new high-speed USB device number 30 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 31 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0010: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 30
usb 1-6.2: USB disconnect, device number 31
usb 1-6: new high-speed USB device number 32 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 33 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0011: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 32
usb 1-6.2: USB disconnect, device number 33
usb 1-6: new high-speed USB device number 34 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 35 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0012: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 34
usb 1-6.2: USB disconnect, device number 35
usb 1-6: new high-speed USB device number 36 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 37 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0013: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 36
usb 1-6.2: USB disconnect, device number 37
usb 1-6: new high-speed USB device number 38 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 39 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0014: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 38
usb 1-6.2: USB disconnect, device number 39
usb 1-6: new high-speed USB device number 40 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 41 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0015: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 40
usb 1-6.2: USB disconnect, device number 41
usb 1-6: new high-speed USB device number 42 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 43 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0016: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 42
usb 1-6.2: USB disconnect, device number 43
usb 1-6: new high-speed USB device number 44 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 45 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0017: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 44
usb 1-6.2: USB disconnect, device number 45
usb 1-6: new high-speed USB device number 46 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 47 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0018: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
ip_tables: (C) 2000-2006 Netfilter Core Team
usb 1-6: USB disconnect, device number 46
usb 1-6.2: USB disconnect, device number 47
usb 1-6: new high-speed USB device number 48 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 49 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0019: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 48
usb 1-6.2: USB disconnect, device number 49
usb 1-6: new high-speed USB device number 50 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 51 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.001A: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 50
usb 1-6.2: USB disconnect, device number 51
usb 1-6: new high-speed USB device number 52 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 53 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.001B: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
sky2 0000:07:00.0 eth0: disabling interface
sky2 0000:07:00.0 eth0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 0000:07:00.0 eth0: disabling interface
sky2 0000:07:00.0 eth0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 8:0:0:0: [sdd] Synchronizing SCSI cache
sd 3:0:0:0: [sdc] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 3:0:0:0: [sdc] Stopping disk
sd 1:0:0:0: [sdb] Stopping disk
sd 8:0:0:0: [sdd] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 1035.913 msecs
PM: late suspend of devices complete after 0.232 msecs
pcieport 0000:00:1c.5: System wakeup enabled by ACPI
pcieport 0000:00:1c.2: System wakeup enabled by ACPI
pcieport 0000:00:02.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 359.842 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 76
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
Broke affinity for irq 19
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
Broke affinity for irq 18
Broke affinity for irq 67
Broke affinity for irq 75
Broke affinity for irq 79
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
kvm: enabling virtualization on CPU3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
kvm: enabling virtualization on CPU4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
CPU7 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
pcieport 0000:00:02.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 455.200 msecs
PM: early resume of devices complete after 0.120 msecs
usb usb4: root hub lost power or was reset
pcieport 0000:00:1c.2: System wakeup disabled by ACPI
usb usb3: root hub lost power or was reset
pcieport 0000:00:1c.5: System wakeup disabled by ACPI
usb usb5: root hub lost power or was reset
snd_hda_intel 0000:00:1b.0: irq 80 for MSI/MSI-X
usb usb6: root hub lost power or was reset
usb usb7: root hub lost power or was reset
usb usb8: root hub lost power or was reset
usb usb9: root hub lost power or was reset
usb usb10: root hub lost power or was reset
xhci_hcd 0000:02:00.0: irq 67 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 68 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 69 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 70 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 71 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 74 for MSI/MSI-X
ata7: SATA link down (SStatus 0 SControl 370)
ata8: SATA link down (SStatus 0 SControl 370)
ata12: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
usb 5-1: reset low-speed USB device number 2 using uhci_hcd
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9.00: configured for UDMA/100
sd 8:0:0:0: [sdd] Starting disk
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/100
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
firewire_core 0000:09:02.0: rediscovered device fw0
ata5.00: configured for UDMA/100
usb 7-2: reset full-speed USB device number 2 using uhci_hcd
usb 10-1: reset SuperSpeed USB device number 2 using xhci_hcd
usb 10-1: Parent hub missing LPM exit latency info. Power management will be impacted.
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88061702ffc0
sky2 0000:07:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
ata4: softreset failed (device not ready)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
sd 3:0:0:0: [sdc] Starting disk
PM: resume of devices complete after 11103.651 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
sky2 0000:07:00.0 eth0: disabling interface
sky2 0000:07:00.0 eth0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 0000:07:00.0 eth0: disabling interface
sky2 0000:07:00.0 eth0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 0000:07:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
usb 1-6: USB disconnect, device number 52
usb 1-6.2: USB disconnect, device number 53
usb 1-6: new high-speed USB device number 54 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 55 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.001C: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 54
usb 1-6.2: USB disconnect, device number 55
usb 1-6: new high-speed USB device number 56 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 57 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.001D: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 56
usb 1-6.2: USB disconnect, device number 57
usb 1-6: new high-speed USB device number 58 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 59 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.001E: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 58
usb 1-6.2: USB disconnect, device number 59
hid-generic 0003:051D:0002.001E: usb_submit_urb(ctrl) failed: -19
usb 1-6: new high-speed USB device number 60 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 61 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.001F: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 60
usb 1-6.2: USB disconnect, device number 61
usb 1-6: new high-speed USB device number 62 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 63 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0020: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 62
usb 1-6.2: USB disconnect, device number 63
usb 1-6: new high-speed USB device number 64 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 65 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0021: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 64
usb 1-6.2: USB disconnect, device number 65
usb 1-6: new high-speed USB device number 66 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 67 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0022: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 66
usb 1-6.2: USB disconnect, device number 67
usb 1-6: new high-speed USB device number 68 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 69 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0023: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 68
usb 1-6.2: USB disconnect, device number 69
usb 1-6: new high-speed USB device number 70 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 71 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0024: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 70
usb 1-6.2: USB disconnect, device number 71
usb 1-6: new high-speed USB device number 72 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 73 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0025: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 72
usb 1-6.2: USB disconnect, device number 73
hid-generic 0003:051D:0002.0025: usb_submit_urb(ctrl) failed: -19
usb 1-6: new high-speed USB device number 74 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 75 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0026: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 74
usb 1-6.2: USB disconnect, device number 75
usb 1-6: new high-speed USB device number 76 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 77 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0027: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 76
usb 1-6.2: USB disconnect, device number 77
hid-generic 0003:051D:0002.0027: usb_submit_urb(ctrl) failed: -19
usb 1-6: new high-speed USB device number 78 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 79 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0028: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 78
usb 1-6.2: USB disconnect, device number 79
usb 1-6: new high-speed USB device number 80 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 81 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0029: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
hub 7-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
usb 7-2: USB disconnect, device number 2
usb 7-2: new full-speed USB device number 3 using uhci_hcd
usb 7-2: New USB device found, idVendor=1a7c, idProduct=0191
usb 7-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 7-2: Product: Evoluent VerticalMouse 4
input: Evoluent VerticalMouse 4 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input22
hid-generic 0003:1A7C:0191.002A: input,hidraw1: USB HID v1.11 Mouse [Evoluent VerticalMouse 4] on usb-0000:00:1d.1-2/input0
hub 5-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
usb 5-1: USB disconnect, device number 2
usb 5-1: new low-speed USB device number 3 using uhci_hcd
usb 5-1: New USB device found, idVendor=045e, idProduct=078c
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB Keyboard
usb 5-1: Manufacturer: LITEON Technology
input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input23
hid-generic 0003:045E:078C.002B: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:00:1a.2-1/input0
usb 2-5: new high-speed USB device number 3 using ehci-pci
usb 2-5: New USB device found, idVendor=1a40, idProduct=0101
usb 2-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-5: Product: USB 2.0 Hub
hub 2-5:1.0: USB hub found
hub 2-5:1.0: 4 ports detected
usb 2-5.4: new full-speed USB device number 4 using ehci-pci
usb 2-5.4: New USB device found, idVendor=0d8c, idProduct=0008
usb 2-5.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-5.4: Product: C-Media USB Audio Device
input: C-Media USB Audio Device as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.4/2-5.4:1.3/input/input24
hid-generic 0003:0D8C:0008.002C: input,hidraw3: USB HID v1.00 Device [C-Media USB Audio Device ] on usb-0000:00:1d.7-5.4/input3
usbcore: registered new interface driver snd-usb-audio
hub 2-0:1.0: port 5 disabled by hub (EMI?), re-enabling...
usb 2-5: USB disconnect, device number 3
usb 2-5.4: USB disconnect, device number 4
usb 2-5: new high-speed USB device number 5 using ehci-pci
usb 2-5: New USB device found, idVendor=1a40, idProduct=0101
usb 2-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-5: Product: USB 2.0 Hub
hub 2-5:1.0: USB hub found
hub 2-5:1.0: 4 ports detected
usb 2-5.4: new full-speed USB device number 6 using ehci-pci
usb 2-5.4: New USB device found, idVendor=0d8c, idProduct=0008
usb 2-5.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-5.4: Product: C-Media USB Audio Device
input: C-Media USB Audio Device as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.4/2-5.4:1.3/input/input25
hid-generic 0003:0D8C:0008.002D: input,hidraw3: USB HID v1.00 Device [C-Media USB Audio Device ] on usb-0000:00:1d.7-5.4/input3
retire_capture_urb: 14 callbacks suppressed
hid-generic 0003:0D8C:0008.002D: can't reset device, 0000:00:1d.7-5.4/input3, status -71
hid-generic 0003:0D8C:0008.002D: can't reset device, 0000:00:1d.7-5.4/input3, status -71
hid-generic 0003:0D8C:0008.002D: can't reset device, 0000:00:1d.7-5.4/input3, status -71
usb 2-5.4: USB disconnect, device number 6
usb 2-5: USB disconnect, device number 5
usb 1-6: USB disconnect, device number 80
usb 1-6.2: USB disconnect, device number 81
usb 1-6: new high-speed USB device number 82 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 83 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.002E: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
ptrace of pid 13520 was attempted by: gdb (pid 13521)
ptrace of pid 13697 was attempted by: gdb (pid 13698)
usb 1-6: USB disconnect, device number 82
usb 1-6.2: USB disconnect, device number 83
usb 1-6: new high-speed USB device number 84 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 85 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.002F: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 84
usb 1-6.2: USB disconnect, device number 85
usb 1-6: new high-speed USB device number 86 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 87 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0030: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 86
usb 1-6.2: USB disconnect, device number 87
usb 1-6: new high-speed USB device number 88 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 89 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0031: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 88
usb 1-6.2: USB disconnect, device number 89
hid-generic 0003:051D:0002.0031: usb_submit_urb(ctrl) failed: -19
usb 1-6: new high-speed USB device number 90 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 91 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0032: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 90
usb 1-6.2: USB disconnect, device number 91
usb 1-6: new high-speed USB device number 92 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 93 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0033: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 92
usb 1-6.2: USB disconnect, device number 93
usb 1-6: new high-speed USB device number 94 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 95 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0034: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 94
usb 1-6.2: USB disconnect, device number 95
usb 1-6: new high-speed USB device number 96 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 97 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0035: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
do_IRQ: 2.214 No irq handler for vector (irq -1)
usb 1-6: USB disconnect, device number 96
usb 1-6.2: USB disconnect, device number 97
usb 1-6: new high-speed USB device number 98 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 99 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0036: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 98
usb 1-6.2: USB disconnect, device number 99
usb 1-6: new high-speed USB device number 100 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 101 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0037: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 7-2: input irq status -75 received
warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
device eth0 entered promiscuous mode
usb 1-6: USB disconnect, device number 100
usb 1-6.2: USB disconnect, device number 101
usb 1-6: new high-speed USB device number 102 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 103 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0038: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
do_IRQ: 1.124 No irq handler for vector (irq -1)
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
usb 1-6: USB disconnect, device number 102
usb 1-6.2: USB disconnect, device number 103
usb 1-6: new high-speed USB device number 104 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 105 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0039: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 104
usb 1-6.2: USB disconnect, device number 105
usb 1-6: new high-speed USB device number 106 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 107 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.003A: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
do_IRQ: 1.77 No irq handler for vector (irq -1)
usb 1-6: USB disconnect, device number 106
usb 1-6.2: USB disconnect, device number 107
usb 1-6: new high-speed USB device number 108 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 109 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.003B: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 108
usb 1-6.2: USB disconnect, device number 109
usb 1-6: new high-speed USB device number 110 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 111 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.003C: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 110
usb 1-6.2: USB disconnect, device number 111
usb 1-6: new high-speed USB device number 112 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 113 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.003D: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 112
usb 1-6.2: USB disconnect, device number 113
usb 1-6: new high-speed USB device number 114 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 115 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.003E: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 114
usb 1-6.2: USB disconnect, device number 115
usb 1-6: new high-speed USB device number 116 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 117 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.003F: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 116
usb 1-6.2: USB disconnect, device number 117
usb 1-6: new high-speed USB device number 118 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 119 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0040: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
do_IRQ: 1.168 No irq handler for vector (irq -1)
usb 1-6: USB disconnect, device number 118
usb 1-6.2: USB disconnect, device number 119
usb 1-6: new high-speed USB device number 120 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 121 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0041: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
iron[25246]: segfault at fbadbeef ip 00007f708acdcc7d sp 00007fffa8434860 error 6 in iron[7f708850a000+620c000]
usb 1-6: USB disconnect, device number 120
usb 1-6.2: USB disconnect, device number 121
hid-generic 0003:051D:0002.0041: usb_submit_urb(ctrl) failed: -19
usb 1-6: new high-speed USB device number 122 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 123 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0042: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 122
usb 1-6.2: USB disconnect, device number 123
usb 1-6: new high-speed USB device number 124 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 125 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0043: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 124
usb 1-6.2: USB disconnect, device number 125
usb 1-6: new high-speed USB device number 126 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 127 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0044: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
device eth0 left promiscuous mode
vboxnetflt: 0 out of 19974754 packets were not sent (directed to host)
iron[11974]: segfault at fbadbeef ip 00007fcc1e448c7d sp 00007ffffa481ce0 error 6 in iron[7fcc1bc76000+620c000]
usb 1-6: USB disconnect, device number 126
usb 1-6.2: USB disconnect, device number 127
usb 1-6: new high-speed USB device number 3 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 4 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0045: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
usb 1-6: USB disconnect, device number 3
usb 1-6.2: USB disconnect, device number 4
usb 1-6: new high-speed USB device number 5 using ehci-pci
usb 1-6: New USB device found, idVendor=1a40, idProduct=0101
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 6 using ehci-pci
usb 1-6.2: New USB device found, idVendor=051d, idProduct=0002
usb 1-6.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 1-6.2: Manufacturer: American Power Conversion
usb 1-6.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0046: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.7-6.2/input0
device eth0 entered promiscuous mode
usb 1-6: USB disconnect, device number 5
usb 1-6.2: USB disconnect, device number 6
usb 1-6: new high-speed USB device number 7 using ehci-pci
usb 5-2: new full-speed USB device number 4 using uhci_hcd
usb 5-2: not running at top speed; connect to a high speed hub
usb 5-2: New USB device found, idVendor=1a40, idProduct=0101
usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-2: Product: USB 2.0 Hub
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 4 ports detected
usb 5-2.2: new low-speed USB device number 5 using uhci_hcd
usb 5-2.2: New USB device found, idVendor=051d, idProduct=0002
usb 5-2.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 5-2.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 5-2.2: Manufacturer: American Power Conversion
usb 5-2.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0047: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.2-2.2/input0
device eth0 left promiscuous mode
vboxnetflt: 17 out of 7909364 packets were not sent (directed to host)
iron[25545]: segfault at fbadbeef ip 00007fb5e9c63c7d sp 00007fff6bf618c0 error 6 in iron[7fb5e7491000+620c000]
do_IRQ: 2.66 No irq handler for vector (irq -1)
iron[25446]: segfault at fbadbeef ip 00007fb5e9c63c7d sp 00007fff6bf61270 error 6 in iron[7fb5e7491000+620c000]
hub 5-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
usb 5-2: USB disconnect, device number 4
usb 5-2.2: USB disconnect, device number 5
usb 5-2: new full-speed USB device number 6 using uhci_hcd
usb 5-2: not running at top speed; connect to a high speed hub
usb 5-2: New USB device found, idVendor=1a40, idProduct=0101
usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-2: Product: USB 2.0 Hub
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 4 ports detected
usb 5-2.2: new low-speed USB device number 7 using uhci_hcd
usb 5-2.2: New USB device found, idVendor=051d, idProduct=0002
usb 5-2.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 5-2.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 5-2.2: Manufacturer: American Power Conversion
usb 5-2.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0048: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.2-2.2/input0
hub 5-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
usb 5-2: USB disconnect, device number 6
usb 5-2.2: USB disconnect, device number 7
usb 5-2: new full-speed USB device number 8 using uhci_hcd
usb 5-2: not running at top speed; connect to a high speed hub
usb 5-2: New USB device found, idVendor=1a40, idProduct=0101
usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-2: Product: USB 2.0 Hub
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 4 ports detected
usb 5-2.2: new low-speed USB device number 9 using uhci_hcd
usb 5-2.2: New USB device found, idVendor=051d, idProduct=0002
usb 5-2.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 5-2.2: Product: Back-UPS ES 750G FW:841.I4 .D USB FW:I4
usb 5-2.2: Manufacturer: American Power Conversion
usb 5-2.2: SerialNumber: 3B1237X09106
hid-generic 0003:051D:0002.0049: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS ES 750G FW:841.I4 .D USB FW:I4 ] on usb-0000:00:1a.2-2.2/input0
systemd-hostnamed[24174]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
apcupsd[2073]: segfault at 0 ip 0000000000411e47 sp 00007ffffdd28a00 error 4 in apcupsd[400000+3a000]
systemd-hostnamed[17811]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
iron[29841]: segfault at fbadbeef ip 00007fb5e9c63c7d sp 00007fff6bf61270 error 6 in iron[7fb5e7491000+620c000]