dmesg - sdc1-disk-suite-2

Return To sdc1-disk-suite-2 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-28-generic (buildd@komainu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #37-Ubuntu SMP Tue Dec 9 11:06:13 UTC 2014 (Ubuntu 3.16.0-28.37~14.04.1-generic 3.16.7-ckt1)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee0fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfee1000-0x00000000cfeeffff] ACPI data
BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001afffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. X58A-UD3R/X58A-UD3R, BIOS F5 03/11/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x1b0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CDFFF write-protect
  CE000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask F00000000 write-back
  1 base 0E0000000 mask FE0000000 uncachable
  2 base 0D0000000 mask FF0000000 uncachable
  3 base 100000000 mask F00000000 write-back
  4 base 1C0000000 mask FC0000000 uncachable
  5 base 1B0000000 mask FF0000000 uncachable
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3584MB, range: 512MB, type UC
reg 2, base: 3328MB, range: 256MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 7GB, range: 1GB, type UC
reg 5, base: 6912MB, range: 256MB, type UC
total RAM covered: 6144M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64K 	num_reg: 6  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 4GB, range: 2GB, type WB
reg 4, base: 6GB, range: 512MB, type WB
reg 5, base: 6656MB, range: 256MB, type WB
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5e00-0x000f5e0f] mapped at [ffff8800000f5e00]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fbd000, 0x01fbdfff] PGTABLE
BRK [0x01fbe000, 0x01fbefff] PGTABLE
BRK [0x01fbf000, 0x01fbffff] PGTABLE
init_memory_mapping: [mem 0x1afe00000-0x1afffffff]
 [mem 0x1afe00000-0x1afffffff] page 2M
BRK [0x01fc0000, 0x01fc0fff] PGTABLE
init_memory_mapping: [mem 0x1ac000000-0x1afdfffff]
 [mem 0x1ac000000-0x1afdfffff] page 2M
init_memory_mapping: [mem 0x180000000-0x1abffffff]
 [mem 0x180000000-0x1abffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcfedffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0xcfdfffff] page 2M
 [mem 0xcfe00000-0xcfedffff] page 4k
init_memory_mapping: [mem 0x100000000-0x17fffffff]
 [mem 0x100000000-0x17fffffff] page 2M
BRK [0x01fc1000, 0x01fc1fff] PGTABLE
BRK [0x01fc2000, 0x01fc2fff] PGTABLE
RAMDISK: [mem 0x35ac6000-0x36d5afff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F77C0 000014 (v00 GBT   )
ACPI: RSDT 0x00000000CFEE1040 000040 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0x00000000CFEE10C0 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0x00000000CFEE1180 0058B8 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 0x00000000CFEE0000 000040
ACPI: HPET 0x00000000CFEE6C00 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0x00000000CFEE6C80 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: EUDS 0x00000000CFEE6CC0 0004D0 (v01 GBT             00000000      00000000)
ACPI: TAMG 0x00000000CFEE7190 000C8A (v01 GBT    GBT   B0 5455312E BG?? 53450101)
ACPI: APIC 0x00000000CFEE6A80 00012C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 0x00000000CFEE7E20 002EDC (v01 INTEL  PPM RCM  80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001afffffff]
Initmem setup node 0 [mem 0x00000000-0x1afffffff]
  NODE_DATA [mem 0x1afff7000-0x1afffbfff]
 [ffffea0000000000-ffffea0006bfffff] PMD -> [ffff8801a9600000-ffff8801af5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x1afffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009bfff]
  node   0: [mem 0x00100000-0xcfedffff]
  node   0: [mem 0x100000000-0x1afffffff]
On node 0 totalpages: 1572475
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3995 pages, LIFO batch:0
  DMA32 zone: 13244 pages used for memmap
  DMA32 zone: 847584 pages, LIFO batch:31
  Normal zone: 11264 pages used for memmap
  Normal zone: 720896 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcfee0000-0xcfee0fff]
PM: Registered nosave memory: [mem 0xcfee1000-0xcfeeffff]
PM: Registered nosave memory: [mem 0xcfef0000-0xcfefffff]
PM: Registered nosave memory: [mem 0xcff00000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xcff00000-0xf3ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff8801afc00000 s82304 r8192 d24192 u131072
pcpu-alloc: s82304 r8192 d24192 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1547882
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 6088216K/6289900K available (7614K kernel code, 1130K rwdata, 3596K rodata, 1352K init, 1300K bss, 201684K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-15.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS:16640 nr_irqs:808 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 25165824 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2698.726 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5397.45 BogoMIPS (lpj=10794904)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ftrace: allocating 29206 entries in 115 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz (fam: 06, model: 1a, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  #2  #3  #4  #5  #6  #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (43179.61 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee0fff] (4096 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 22:11:10, date: 12/28/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff]
pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:340c] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
pci 0000:00:11.0: [8086:3427] type 00 class 0x080000
pci 0000:00:11.1: [8086:3428] type 00 class 0x080000
pci 0000:00:13.0: [8086:342d] type 00 class 0x080020
pci 0000:00:13.0: reg 0x10: [mem 0xfbfff000-0xfbffffff]
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:15.0: [8086:342f] type 00 class 0x080020
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io  0xff00-0xff1f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io  0xfe00-0xfe1f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io  0xfd00-0xfd1f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbff4000-0xfbff7fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0xfc00-0xfc1f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0xfb00-0xfb1f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0xfa00-0xfa1f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfbffd000-0xfbffd3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io  0x0400-0x047f]: address conflict with ACPI CPU throttle [io  0x0410-0x0415]
pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf900-0xf907]
pci 0000:00:1f.2: reg 0x14: [io  0xf800-0xf803]
pci 0000:00:1f.2: reg 0x18: [io  0xf700-0xf707]
pci 0000:00:1f.2: reg 0x1c: [io  0xf600-0xf603]
pci 0000:00:1f.2: reg 0x20: [io  0xf500-0xf51f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbffc000-0xfbffc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbffb000-0xfbffb0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
pci 0000:01:00.0: [1b4b:9128] type 00 class 0x010601
pci 0000:01:00.0: reg 0x10: [io  0xcf00-0xcf07]
pci 0000:01:00.0: reg 0x14: [io  0xce00-0xce03]
pci 0000:01:00.0: reg 0x18: [io  0xcd00-0xcd07]
pci 0000:01:00.0: reg 0x1c: [io  0xcc00-0xcc03]
pci 0000:01:00.0: reg 0x20: [io  0xcb00-0xcb0f]
pci 0000:01:00.0: reg 0x24: [mem 0xfbaff000-0xfbaff7ff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:00.0: PME# supported from D3hot
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:01.0:   bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfb8fe000-0xfb8fffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0:   bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:03:00.0: [10de:1380] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xf9000000-0xf9ffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xee000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io  0xdf00-0xdf7f]
pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:03:00.1: [10de:0fbc] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfaffc000-0xfaffffff]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:03.0:   bridge window [mem 0xf9000000-0xfaffffff]
pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 04]
pci 0000:00:07.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [1b4b:9485] type 00 class 0x010400
pci 0000:06:00.0: reg 0x10: [mem 0xfb7c0000-0xfb7dffff 64bit]
pci 0000:06:00.0: reg 0x18: [mem 0xfb780000-0xfb7bffff 64bit]
pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:06:00.0: supports D1
pci 0000:06:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:09.0: PCI bridge to [bus 06]
pci 0000:00:09.0:   bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:08:00.0: [197b:2363] type 00 class 0x010601
pci 0000:08:00.0: reg 0x24: [mem 0xfbefe000-0xfbefffff]
pci 0000:08:00.0: PME# supported from D3hot
pci 0000:08:00.1: [197b:2363] type 00 class 0x010185
pci 0000:08:00.1: reg 0x10: [io  0xbf00-0xbf07]
pci 0000:08:00.1: reg 0x14: [io  0xbe00-0xbe03]
pci 0000:08:00.1: reg 0x18: [io  0xbd00-0xbd07]
pci 0000:08:00.1: reg 0x1c: [io  0xbc00-0xbc03]
pci 0000:08:00.1: reg 0x20: [io  0xbb00-0xbb0f]
pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 08]
pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.1:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:09:00.0: [197b:2363] type 00 class 0x010601
pci 0000:09:00.0: reg 0x24: [mem 0xfbdfe000-0xfbdfffff]
pci 0000:09:00.0: PME# supported from D3hot
pci 0000:09:00.1: [197b:2363] type 00 class 0x010185
pci 0000:09:00.1: reg 0x10: [io  0xaf00-0xaf07]
pci 0000:09:00.1: reg 0x14: [io  0xae00-0xae03]
pci 0000:09:00.1: reg 0x18: [io  0xad00-0xad07]
pci 0000:09:00.1: reg 0x1c: [io  0xac00-0xac03]
pci 0000:09:00.1: reg 0x20: [io  0xab00-0xab0f]
pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.3:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:0a:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:0a:00.0: reg 0x10: [io  0xee00-0xeeff]
pci 0000:0a:00.0: reg 0x18: [mem 0xfbbff000-0xfbbfffff 64bit pref]
pci 0000:0a:00.0: reg 0x20: [mem 0xfbbf8000-0xfbbfbfff 64bit pref]
pci 0000:0a:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 0a]
pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.4:   bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.4:   bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref]
pci 0000:0b:06.0: [104c:8024] type 00 class 0x0c0010
pci 0000:0b:06.0: reg 0x10: [mem 0xfb9ff000-0xfb9ff7ff]
pci 0000:0b:06.0: reg 0x14: [mem 0xfb9f8000-0xfb9fbfff]
pci 0000:0b:06.0: supports D1 D2
pci 0000:0b:06.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
vgaarb: setting as boot device: PCI:0000:03:00.0
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io  0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
pci 0000:3f:00.0: [8086:2c41] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:3f:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:3f:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:3f:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:3f:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:3f:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:3f:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:3f:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:3f:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:3f:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:3f:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:3f:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:3f:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:3f:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:3f:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:3f:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io  0x04d0-0x04d1] has been reserved
system 00:00: [io  0x0290-0x029f] has been reserved
system 00:00: [io  0x0800-0x087f] has been reserved
system 00:00: [io  0x0290-0x0294] has been reserved
system 00:00: [io  0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io  0x0400-0x04cf] could not be reserved
system 00:02: [io  0x04d2-0x04ff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [mem 0xf4000000-0xf7ffffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [mem 0x000db000-0x000dbfff] has been reserved
system 00:04: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:04: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:04: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:04: [mem 0xcfee0000-0xcfefffff] could not be reserved
system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:04: [mem 0x00100000-0xcfedffff] could not be reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:04: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:04: [mem 0xfff00000-0xffffffff] has been reserved
system 00:04: [mem 0x000e0000-0x000effff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 5 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 07] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000
pci 0000:00:1f.0: BAR 13: [io  0x0400-0x047f] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfba00000-0xfba0ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:01.0:   bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0:   bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:03:00.0: BAR 6: assigned [mem 0xfa000000-0xfa07ffff pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:03.0:   bridge window [mem 0xf9000000-0xfaffffff]
pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 04]
pci 0000:00:07.0: PCI bridge to [bus 05]
pci 0000:06:00.0: BAR 6: assigned [mem 0xfb700000-0xfb70ffff pref]
pci 0000:00:09.0: PCI bridge to [bus 06]
pci 0000:00:09.0:   bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff]
pci 0000:00:1c.0:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 08]
pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.1:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.1:   bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.3:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.3:   bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:0a:00.0: BAR 6: assigned [mem 0xfbc00000-0xfbc1ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 0a]
pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.4:   bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.4:   bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0b]
pci 0000:00:1e.0:   bridge window [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:02: resource 1 [mem 0xfb800000-0xfb8fffff]
pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf9000000-0xfaffffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfb700000-0xfb7fffff]
pci_bus 0000:07: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:07: resource 1 [mem 0xf0000000-0xf01fffff]
pci_bus 0000:07: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:08: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:08: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
pci_bus 0000:09: resource 0 [io  0xa000-0xafff]
pci_bus 0000:09: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:09: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
pci_bus 0000:0a: resource 0 [io  0xe000-0xefff]
pci_bus 0000:0a: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:0a: resource 2 [mem 0xfbb00000-0xfbbfffff 64bit pref]
pci_bus 0000:0b: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:0b: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:0b: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0b: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:0b: resource 8 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:3f: resource 4 [io  0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19028K (ffff880035ac6000 - ffff880036d5b000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcbee0000-0xcfee0000] (64MB) mapped at [ffff8800cbee0000-ffff8800cfedffff]
microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x11
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1419804670.560:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 11928
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
ioapic: probe of 0000:00:13.0 failed with error -22
ioapic: probe of 0000:00:15.0 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbffe000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-28-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffd000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-28-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-28-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-28-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.0-28-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.16.0-28-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.16.0-28-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.16.0-28-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 51 for MSI/MSI-X
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.16.0-28-generic xhci_hcd
usb usb9: SerialNumber: 0000:02:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10
usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.16.0-28-generic xhci_hcd
usb usb10: SerialNumber: 0000:02:00.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
usb 1-2: new high-speed USB device number 2 using ehci-pci
Loaded X.509 cert 'Magrathea: Glacier signing key: 1b1dc7837cf73db9ec1db2379c728dee5e3e386c'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 10:94:200
rtc_cmos 00:01: setting system clock to 2014-12-28 22:11:11 UTC (1419804671)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1352K (ffffffff81d1c000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 568K (ffff880001772000 - ffff880001800000)
Freeing unused kernel memory: 500K (ffff880001b83000 - ffff880001c00000)
systemd-udevd[168]: starting version 204
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 52 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems 
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 18
ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 18
pata_jmicron 0000:09:00.1: enabling device (0000 -> 0001)
mvsas 0000:06:00.0: mvsas: driver version 0.8.16
mvsas 0000:06:00.0: mvsas: PCI-E x8, Bandwidth Usage: 5.0 Gbps
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:0a:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:0a:00.0: irq 53 for MSI/MSI-X
r8169 0000:0a:00.0 eth0: RTL8168d/8111d at 0xffffc90004ea0000, 6c:f0:49:56:8b:c3, XID 083000c0 IRQ 53
r8169 0000:0a:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi3 : pata_jmicron
scsi4 : pata_jmicron
ata3: PATA max UDMA/100 cmd 0xaf00 ctl 0xae00 bmdma 0xab00 irq 16
ata4: PATA max UDMA/100 cmd 0xad00 ctl 0xac00 bmdma 0xab08 irq 16
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
scsi10 : ahci
ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 52
ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 52
ata7: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 52
ata8: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 52
ata9: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 52
ata10: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 52
ahci 0000:01:00.0: irq 54 for MSI/MSI-X
ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:01:00.0: flags: 64bit ncq pio 
scsi11 : ahci
scsi12 : ahci
scsi13 : ahci
scsi14 : ahci
scsi15 : ahci
scsi16 : ahci
scsi17 : ahci
scsi18 : ahci
ata11: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff100 irq 54
ata12: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff180 irq 54
ata13: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff200 irq 54
ata14: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff280 irq 54
ata15: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff300 irq 54
ata16: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff380 irq 54
ata17: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff400 irq 54
ata18: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff480 irq 54
firewire_ohci 0000:0b:06.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
scsi19 : ahci
scsi20 : ahci
ata19: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe100 irq 17
ata20: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe180 irq 17
ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:09:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
scsi21 : ahci
scsi22 : ahci
ata21: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 19
ata22: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 19
usb 1-2: New USB device found, idVendor=0951, idProduct=1666
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: DataTraveler 3.0
usb 1-2: Manufacturer: Kingston
usb 1-2: SerialNumber: 60A44C3FACDBBD71096E05AD
usb-storage 1-2:1.0: USB Mass Storage device detected
scsi23 : usb-storage 1-2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
ata5: SATA link down (SStatus 0 SControl 300)
ata18: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata16: SATA link down (SStatus 0 SControl 300)
ata18.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata18.00: configured for UDMA/66
ata13: SATA link down (SStatus 0 SControl 300)
ata17: SATA link down (SStatus 0 SControl 300)
ata15: SATA link down (SStatus 0 SControl 300)
ata14: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata19: SATA link down (SStatus 0 SControl 300)
ata20: SATA link down (SStatus 0 SControl 300)
ata21: SATA link down (SStatus 0 SControl 300)
ata22: SATA link down (SStatus 0 SControl 300)
firewire_core 0000:0b:06.0: created device fw0: GUID 005ae40c006cf049, S400
tsc: Refined TSC clocksource calibration: 2698.760 MHz
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
scsi 23:0:0:0: Direct-Access     Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
sd 23:0:0:0: Attached scsi generic sg0 type 0
sd 23:0:0:0: [sda] 15356160 512-byte logical blocks: (7.86 GB/7.32 GiB)
sd 23:0:0:0: [sda] Write Protect is off
sd 23:0:0:0: [sda] Mode Sense: 45 00 00 00
sd 23:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 23:0:0:0: [sda] Attached SCSI removable disk
ata8: SATA link down (SStatus 0 SControl 300)
raid6: sse2x1    6165 MB/s
raid6: sse2x2    4678 MB/s
raid6: sse2x4    5447 MB/s
raid6: using algorithm sse2x1 (6165 MB/s)
raid6: using ssse3x2 recovery algorithm
Switched to clocksource tsc
xor: measuring software checksum speed
   prefetch64-sse: 11034.000 MB/sec
   generic_sse:  9737.000 MB/sec
xor: using function: prefetch64-sse (11034.000 MB/sec)
Btrfs loaded
ata9: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
ata10: SATA link down (SStatus 0 SControl 300)
scsi 18:0:0:0: Processor         Marvell  91xx Config      1.01 PQ: 0 ANSI: 5
ata18.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6
ata18.00: irq_stat 0x40000001
scsi 18:0:0:0: CDB: 
Inquiry: 12 01 00 00 ff 00
ata18.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma 16640 in
         res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
ata18: hard resetting link
ata18: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata18.00: configured for UDMA/66
ata18: EH complete
scsi 18:0:0:0: Attached scsi generic sg1 type 3
floppy0: no floppy controllers found
work still pending
scsi2 : mvsas
sas: phy-2:6 added to port-2:0, phy_mask:0x4 ( 600000000000000)
sas: phy-2:7 added to port-2:1, phy_mask:0x8 ( 700000000000000)
sas: DOING DISCOVERY on port 0, pid:287
sas: DONE DISCOVERY on port 0, pid:287, result:0
sas: DOING DISCOVERY on port 1, pid:287
sas: DONE DISCOVERY on port 1, pid:287, result:0
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata23: end_device-2:0: dev error handler
ata23.00: ATA-8: INTEL SSDSC2BP480G4, L2010420, max UDMA/133
ata23.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata23.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 2:0:0:0: Direct-Access     ATA      INTEL SSDSC2BP48 0420 PQ: 0 ANSI: 5
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata23: end_device-2:0: dev error handler
sas: ata24: end_device-2:1: dev error handler
ata24.00: ATA-8: INTEL SSDSC2BP480G4, L2010420, max UDMA/133
ata24.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata24.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 2:0:1:0: Direct-Access     ATA      INTEL SSDSC2BP48 0420 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdb] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 2:0:1:0: Attached scsi generic sg3 type 0
sd 2:0:1:0: [sdc] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 2:0:1:0: [sdc] Write Protect is off
sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
 sdc: unknown partition table
sd 2:0:1:0: [sdc] Attached SCSI disk
random: init urandom read with 83 bits of entropy available
init: plymouth-upstart-bridge main process (325) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (338) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (340) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (342) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (344) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (345) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (347) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (348) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (350) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (352) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (354) terminated with status 1
init: plymouth-upstart-bridge respawning too fast, stopped
spl: module verification failed: signature and/or  required key missing - tainting kernel
SPL: Loaded module v0.6.3-1~trusty
znvpair: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
ZFS: Loaded module v0.6.3-3~trusty, ZFS pool version 5000, ZFS filesystem version 5
random: nonblocking pool is initialized
systemd-udevd[580]: starting version 204
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
snd_hda_intel 0000:03:00.1: Disabling MSI
snd_hda_intel 0000:03:00.1: Handle VGA-switcheroo audio client
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x000000000000042c-0x000000000000042d (\GP2C) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
sound hdaudioC0D2: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
sound hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D2:    mono: mono_out=0x0
sound hdaudioC0D2:    dig-out=0x11/0x1e
sound hdaudioC0D2:    inputs:
sound hdaudioC0D2:      Front Mic=0x19
sound hdaudioC0D2:      Rear Mic=0x18
sound hdaudioC0D2:      Line=0x1a
sound hdaudioC0D2:    dig-in=0x1f
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
BTRFS: device fsid 7eb01912-ae17-47c4-80da-bc60d1dd406c devid 1 transid 4 /dev/sdb1
gpio_ich: GPIO from 195 to 255 on gpio_ich
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input13
r8169 0000:0a:00.0 eth0: link down
r8169 0000:0a:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=none
NVRM: The NVIDIA GPU 0000:03:00.0 (PCI ID: 10de:1380)
NVRM: installed in this system is not supported by the 304.125
NVRM: NVIDIA Linux driver release.  Please see 'Appendix
NVRM: A - Supported NVIDIA GPU Products' in this release's
NVRM: README, available on the Linux driver download page
NVRM: at www.nvidia.com.
nvidia: probe of 0000:03:00.0 failed with error -1
NVRM: The NVIDIA probe routine failed for 1 device(s).
NVRM: None of the NVIDIA graphics adapters were initialized!
[drm] Module unloaded
systemd-udevd[597]: Failed to apply ACL on /dev/dri/card0: No such file or directory
floppy0: no floppy controllers found
work still pending
init: udev-fallback-graphics main process (811) terminated with status 1
r8169 0000:0a:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: failsafe main process (765) killed by TERM signal
EXT4-fs (sdb): VFS: Can't find ext4 filesystem
EXT4-fs (sdb): VFS: Can't find ext4 filesystem
EXT4-fs (sdb): VFS: Can't find ext4 filesystem
FAT-fs (sdb): bogus number of reserved sectors
FAT-fs (sdb): Can't find a valid FAT filesystem
BTRFS info (device sdb1): disk space caching is enabled
BTRFS: flagging fs with big metadata feature
BTRFS: detected SSD devices, enabling SSD mode
BTRFS info (device sdb1): disk space caching is enabled
BTRFS: detected SSD devices, enabling SSD mode
 sdc: sdc1
perf interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [d] tag[d], task [ffff88005231fe00]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 7FFFFFFF,  slot [d].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [e] tag[e], task [ffff88005231fcc0]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 7FFFDFFF,  slot [e].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [f] tag[f], task [ffff88005231fb80]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 7FFF9FFF,  slot [f].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [10] tag[10], task [ffff88005231fa40]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 7FFF1FFF,  slot [10].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [11] tag[11], task [ffff88005231f900]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 7FFE1FFF,  slot [11].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [12] tag[12], task [ffff88005231f7c0]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 7FFC1FFF,  slot [12].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [13] tag[13], task [ffff88005231f680]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 7FF81FFF,  slot [13].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [14] tag[14], task [ffff88005231f540]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 7FF01FFF,  slot [14].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [15] tag[15], task [ffff88005231f2c0]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 7FE01FFF,  slot [15].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [16] tag[16], task [ffff88005231f400]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 7FC01FFF,  slot [16].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [17] tag[17], task [ffff88005231f180]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 7F801FFF,  slot [17].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [18] tag[18], task [ffff8801470d4dc0]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 7F001FFF,  slot [18].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [19] tag[19], task [ffff8801470d5a40]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 7E001FFF,  slot [19].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [1a] tag[1a], task [ffff8801470d5e00]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 7C001FFF,  slot [1a].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [1b] tag[1b], task [ffff8801470d5400]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 78001FFF,  slot [1b].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [1c] tag[1c], task [ffff8801470d4640]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 70001FFF,  slot [1c].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [1d] tag[1d], task [ffff8801470d4280]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 60001FFF,  slot [1d].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [1e] tag[1e], task [ffff8801470d4b40]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 40001FFF,  slot [1e].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [0] tag[0], task [ffff8801470d5b80]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 00001FFF,  slot [0].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [1] tag[1], task [ffff8801470d5900]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 00001FFE,  slot [1].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [2] tag[2], task [ffff8801470d4f00]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 00001FFC,  slot [2].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [3] tag[3], task [ffff8801470d57c0]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 00001FF8,  slot [3].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [4] tag[4], task [ffff8801470d4140]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 00001FF0,  slot [4].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [5] tag[5], task [ffff8801470d4780]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 00001FE0,  slot [5].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [6] tag[6], task [ffff8801470d4c80]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 00001FC0,  slot [6].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [7] tag[7], task [ffff8801470d5cc0]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 00001F80,  slot [7].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [8] tag[8], task [ffff8801470d5040]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 00001F00,  slot [8].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [9] tag[9], task [ffff8801470d4500]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 00001E00,  slot [9].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [a] tag[a], task [ffff8801470d48c0]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 00001C00,  slot [a].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [b] tag[b], task [ffff8801470d4a00]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 00001800,  slot [b].
sas: sas_ata_task_done: SAS error 8a
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_sas.c 1963:Release slot [c] tag[c], task [ffff8801470d5680]:
/build/buildd/linux-lts-utopic-3.16.0/drivers/scsi/mvsas/mv_94xx.c 625:command active 00001000,  slot [c].
sas: sas_ata_task_done: SAS error 8a
sas: Enter sas_scsi_recover_host busy: 31 failed: 31
sas: ata24: end_device-2:1: cmd error handler
sas: ata23: end_device-2:0: dev error handler
sas: ata24: end_device-2:1: dev error handler
ata24.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:68:33/04:00:00:00:00/40 tag 0 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:6c:33/04:00:00:00:00/40 tag 1 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:70:33/04:00:00:00:00/40 tag 2 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:74:33/04:00:00:00:00/40 tag 3 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:78:33/04:00:00:00:00/40 tag 4 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:7c:33/04:00:00:00:00/40 tag 5 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:80:33/04:00:00:00:00/40 tag 6 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:84:33/04:00:00:00:00/40 tag 7 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:88:33/04:00:00:00:00/40 tag 8 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:8c:33/04:00:00:00:00/40 tag 9 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:90:33/04:00:00:00:00/40 tag 10 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:94:33/04:00:00:00:00/40 tag 11 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:98:33/04:00:00:00:00/40 tag 12 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:9c:33/04:00:00:00:00/40 tag 13 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:a0:33/04:00:00:00:00/40 tag 14 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:a4:33/04:00:00:00:00/40 tag 15 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:2c:33/04:00:00:00:00/40 tag 16 ncq 524288 out
         res 41/84:08:7b:2f:33/00:00:00:00:00/00 Emask 0x410 (ATA bus error) 
ata24.00: status: { DRDY ERR }
ata24.00: error: { ICRC ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:30:33/04:00:00:00:00/40 tag 17 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:34:33/04:00:00:00:00/40 tag 18 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:38:33/04:00:00:00:00/40 tag 19 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:3c:33/04:00:00:00:00/40 tag 20 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:40:33/04:00:00:00:00/40 tag 21 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:44:33/04:00:00:00:00/40 tag 22 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:48:33/04:00:00:00:00/40 tag 23 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:4c:33/04:00:00:00:00/40 tag 24 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:50:33/04:00:00:00:00/40 tag 25 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:54:33/04:00:00:00:00/40 tag 26 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:58:33/04:00:00:00:00/40 tag 27 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:5c:33/04:00:00:00:00/40 tag 28 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:60:33/04:00:00:00:00/40 tag 29 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24.00: failed command: WRITE FPDMA QUEUED
ata24.00: cmd 61/00:00:00:64:33/04:00:00:00:00/40 tag 30 ncq 524288 out
         res 01/04:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata24.00: status: { ERR }
ata24.00: error: { ABRT }
ata24: hard resetting link
ata24.00: configured for UDMA/133
ata24: EH complete
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU4: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature above threshold, cpu clock throttled (total events = 113562)
CPU4: Core temperature above threshold, cpu clock throttled (total events = 113508)
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU5: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Core temperature/speed normal
CPU5: Core temperature/speed normal
CPU0: Core temperature above threshold, cpu clock throttled (total events = 247976)
CPU4: Core temperature above threshold, cpu clock throttled (total events = 247833)
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU7: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Core temperature/speed normal
CPU7: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature above threshold, cpu clock throttled (total events = 34)
CPU5: Core temperature above threshold, cpu clock throttled (total events = 34)
CPU1: Core temperature/speed normal
CPU5: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU7: Core temperature above threshold, cpu clock throttled (total events = 24)
CPU3: Core temperature above threshold, cpu clock throttled (total events = 24)
CPU3: Core temperature/speed normal
CPU7: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature above threshold, cpu clock throttled (total events = 521203)
CPU4: Core temperature above threshold, cpu clock throttled (total events = 520810)
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU5: Core temperature above threshold, cpu clock throttled (total events = 63)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 63)
CPU1: Core temperature/speed normal
CPU5: Core temperature/speed normal
CPU3: Core temperature above threshold, cpu clock throttled (total events = 64)
CPU7: Core temperature above threshold, cpu clock throttled (total events = 64)
CPU7: Core temperature/speed normal
CPU3: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature above threshold, cpu clock throttled (total events = 657092)
CPU4: Core temperature above threshold, cpu clock throttled (total events = 656567)
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU5: Core temperature above threshold, cpu clock throttled (total events = 105)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 105)
CPU5: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU7: Core temperature above threshold, cpu clock throttled (total events = 118)
CPU3: Core temperature above threshold, cpu clock throttled (total events = 118)
CPU7: Core temperature/speed normal
CPU3: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU5: Core temperature above threshold, cpu clock throttled (total events = 266)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 266)
CPU5: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU3: Core temperature above threshold, cpu clock throttled (total events = 236)
CPU7: Core temperature above threshold, cpu clock throttled (total events = 236)
CPU7: Core temperature/speed normal
CPU3: Core temperature/speed normal
CPU0: Core temperature above threshold, cpu clock throttled (total events = 931613)
CPU4: Core temperature above threshold, cpu clock throttled (total events = 930853)
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
perf interrupt took too long (5016 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1375289)
CPU4: Core temperature above threshold, cpu clock throttled (total events = 1374359)
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU4: Core temperature above threshold, cpu clock throttled (total events = 1523313)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1524307)
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU0: Core temperature above threshold, cpu clock throttled (total events = 2387008)
CPU4: Core temperature above threshold, cpu clock throttled (total events = 2385803)
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU0: Core temperature above threshold, cpu clock throttled (total events = 2669659)
CPU4: Core temperature above threshold, cpu clock throttled (total events = 2668359)
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU1: Core temperature above threshold, cpu clock throttled (total events = 324)
CPU5: Core temperature above threshold, cpu clock throttled (total events = 324)
CPU1: Core temperature/speed normal
CPU5: Core temperature/speed normal
CPU4: Core temperature above threshold, cpu clock throttled (total events = 2812055)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 2813397)
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU0: Core temperature above threshold, cpu clock throttled (total events = 2955490)
CPU4: Core temperature above threshold, cpu clock throttled (total events = 2954119)
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU0: Core temperature above threshold, cpu clock throttled (total events = 3085926)
CPU4: Core temperature above threshold, cpu clock throttled (total events = 3084500)
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU0: Core temperature above threshold, cpu clock throttled (total events = 3487180)
CPU4: Core temperature above threshold, cpu clock throttled (total events = 3485582)
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU3: Core temperature above threshold, cpu clock throttled (total events = 263)
CPU7: Core temperature above threshold, cpu clock throttled (total events = 263)
CPU3: Core temperature/speed normal
CPU7: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU4: Core temperature above threshold, cpu clock throttled (total events = 3888759)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 3890543)
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU4: Core temperature above threshold, cpu clock throttled (total events = 4138019)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 4139898)
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU4: Core temperature above threshold, cpu clock throttled (total events = 4262013)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 4263935)
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU4: Core temperature above threshold, cpu clock throttled (total events = 4506714)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 4508740)
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU4: Core temperature above threshold, cpu clock throttled (total events = 4848987)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 4851145)
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU5: Core temperature above threshold, cpu clock throttled (total events = 325)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 325)
CPU5: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU4: Core temperature above threshold, cpu clock throttled (total events = 4854004)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 4856162)
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU1: Core temperature above threshold, cpu clock throttled (total events = 612)
CPU5: Core temperature above threshold, cpu clock throttled (total events = 612)
CPU5: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU7: Core temperature above threshold, cpu clock throttled (total events = 266)
CPU3: Core temperature above threshold, cpu clock throttled (total events = 266)
CPU7: Core temperature/speed normal
CPU3: Core temperature/speed normal
CPU4: Core temperature above threshold, cpu clock throttled (total events = 4860007)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 4862165)
CPU4: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU1: Core temperature above threshold, cpu clock throttled (total events = 1578)
CPU5: Core temperature above threshold, cpu clock throttled (total events = 1578)
CPU1: Core temperature/speed normal
CPU5: Core temperature/speed normal
CPU3: Core temperature above threshold, cpu clock throttled (total events = 600)
CPU7: Core temperature above threshold, cpu clock throttled (total events = 600)
CPU3: Core temperature/speed normal
CPU7: Core temperature/speed normal
CPU4: Core temperature above threshold, cpu clock throttled (total events = 4863090)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 4865248)
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal
CPU1: Core temperature above threshold, cpu clock throttled (total events = 2264)
CPU5: Core temperature above threshold, cpu clock throttled (total events = 2264)
CPU5: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU6: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Core temperature/speed normal
CPU6: Core temperature/speed normal
CPU0: Core temperature above threshold, cpu clock throttled (total events = 5011408)
CPU4: Core temperature above threshold, cpu clock throttled (total events = 5009250)
CPU0: Core temperature/speed normal
CPU4: Core temperature/speed normal

Return To sdc1-disk-suite-2 System Information