dmesg - I
CPU0 microcode updated early to revision 0xa0b, date = 2010-09-28
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-16) ) #1 SMP Debian 3.16.7-ckt2-1 (2014-12-08)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bfedffff] usable
BIOS-e820: [mem 0x00000000bfee0000-0x00000000bfef2fff] ACPI data
BIOS-e820: [mem 0x00000000bfef3000-0x00000000bfef3fff] ACPI NVS
BIOS-e820: [mem 0x00000000bfef4000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: empty empty/S5396, BIOS 1.03.5396 02/02/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 3FC0000000 uncachable
1 base 0000000000 mask 0E00000000 write-back
2 base 0200000000 mask 3FC0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
mtrr: your BIOS has configured an incorrect mask, fixing it.
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbfee0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f6890-0x000f689f] mapped at [ffff8800000f6890]
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01af2000, 0x01af2fff] PGTABLE
BRK [0x01af3000, 0x01af3fff] PGTABLE
BRK [0x01af4000, 0x01af4fff] PGTABLE
init_memory_mapping: [mem 0x23fe00000-0x23fffffff]
[mem 0x23fe00000-0x23fffffff] page 2M
BRK [0x01af5000, 0x01af5fff] PGTABLE
init_memory_mapping: [mem 0x23c000000-0x23fdfffff]
[mem 0x23c000000-0x23fdfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x23bffffff]
[mem 0x200000000-0x23bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbfedffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbfdfffff] page 2M
[mem 0xbfe00000-0xbfedffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
BRK [0x01af6000, 0x01af6fff] PGTABLE
BRK [0x01af7000, 0x01af7fff] PGTABLE
RAMDISK: [mem 0x35e90000-0x36f3ffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F6860 000024 (v02 PTLTD )
ACPI: XSDT 0x00000000BFEEB9D2 00005C (v01 PTLTD ? XSDT 06040000 LTP 00000000)
ACPI: FACP 0x00000000BFEF2DB6 0000F4 (v03 INTEL SEABURG 06040000 PTL 00000003)
ACPI: DSDT 0x00000000BFEEE462 0048E0 (v01 Intel SEABURG 06040000 MSFT 03000000)
ACPI: FACS 0x00000000BFEF3FC0 000040
ACPI: _MAR 0x00000000BFEF2EAA 000030 (v01 Intel OEMDMAR 06040000 LOHR 00000001)
ACPI: TCPA 0x00000000BFEF2EDA 000032 (v01 Intel SEABURG 06040000 LOHR 0000005A)
ACPI: APIC 0x00000000BFEF2F0C 000090 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: MCFG 0x00000000BFEF2F9C 00003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: BOOT 0x00000000BFEF2FD8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT 0x00000000BFEEBA2E 001405 (v01 PmRef CpuPm 00003000 INTL 20050228)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
Initmem setup node 0 [mem 0x00000000-0x23fffffff]
NODE_DATA [mem 0x23fff6000-0x23fffafff]
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237600000-ffff88023e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x23fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xbfedffff]
node 0: [mem 0x100000000-0x23fffffff]
On node 0 totalpages: 2096764
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 10693 pages used for memmap
DMA32 zone: 782048 pages, LIFO batch:31
Normal zone: 17920 pages used for memmap
Normal zone: 1310720 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xfec88000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 32, address 0xfec88000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
PM: Registered nosave memory: [mem 0x000d4000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbfee0000-0xbfef2fff]
PM: Registered nosave memory: [mem 0xbfef3000-0xbfef3fff]
PM: Registered nosave memory: [mem 0xbfef4000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88023fc00000 s81792 r8192 d20608 u524288
pcpu-alloc: s81792 r8192 d20608 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2068074
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x3, cntxt size 0x240
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8177192K/8387056K available (5192K kernel code, 942K rwdata, 1828K rodata, 1200K init, 840K bss, 209864K reserved)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:1024 16
Console: colour VGA+ 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 2493.789 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4987.57 BogoMIPS (lpj=9975156)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 20K (ffffffff81a19000 - ffffffff81a1e000)
ftrace: allocating 21561 entries in 85 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz (fam: 06, model: 17, stepping: 0a)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
CPU1 microcode updated early to revision 0xa0b, date = 2010-09-28
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
CPU2 microcode updated early to revision 0xa0b, date = 2010-09-28
#3
CPU3 microcode updated early to revision 0xa0b, date = 2010-09-28
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19950.31 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbfef3000-0xbfef3fff] (4096 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xe0000000-0xe1ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe1ffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880236874C00 0001DD (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880236E46E00 00016E (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880236874A00 00016E (v01 PmRef Cpu2Ist 00003000 INTL 20050228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880236E46C00 00016E (v01 PmRef Cpu3Ist 00003000 INTL 20050228)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:4001] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:4021] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:4025] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [8086:4029] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:10.0: [8086:4030] type 00 class 0x060000
pci 0000:00:10.1: [8086:4030] type 00 class 0x060000
pci 0000:00:10.2: [8086:4030] type 00 class 0x060000
pci 0000:00:10.3: [8086:4030] type 00 class 0x060000
pci 0000:00:10.4: [8086:4030] type 00 class 0x060000
pci 0000:00:11.0: [8086:4031] type 00 class 0x060000
pci 0000:00:15.0: [8086:4035] type 00 class 0x060000
pci 0000:00:15.1: [8086:4035] type 00 class 0x060000
pci 0000:00:16.0: [8086:4036] type 00 class 0x060000
pci 0000:00:16.1: [8086:4036] type 00 class 0x060000
pci 0000:00:1b.0: [8086:269a] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd8704000-0xd8707fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2690] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x1800-0x181f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x1820-0x183f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x1840-0x185f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:268b] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0x1860-0x187f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xd8708000-0xd87083ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.1: [8086:269e] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x20: [io 0x1880-0x188f]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.2: [8086:2680] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0x18c0-0x18c7]
pci 0000:00:1f.2: reg 0x14: [io 0x18b8-0x18bb]
pci 0000:00:1f.2: reg 0x18: [io 0x18b0-0x18b7]
pci 0000:00:1f.2: reg 0x1c: [io 0x1894-0x1897]
pci 0000:00:1f.2: reg 0x20: [io 0x18a0-0x18af]
pci 0000:00:1f.2: reg 0x24: [mem 0xd8708400-0xd87087ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:269b] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0x1100-0x111f]
pci 0000:01:00.0: [1002:5b62] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xd8500000-0xd850ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0x2000-0x20ff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:5b72] type 00 class 0x038000
pci 0000:01:00.1: reg 0x10: [mem 0xd8510000-0xd851ffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xd8500000-0xd85fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 05]
pci 0000:09:00.0: [8086:3500] type 01 class 0x060400
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.3: [8086:350c] type 01 class 0x060400
pci 0000:09:00.3: PME# supported from D0 D3hot D3cold
pci 0000:09:00.3: System wakeup disabled by ACPI
pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:09.0: PCI bridge to [bus 09-10]
pci 0000:00:09.0: bridge window [io 0x3000-0x4fff]
pci 0000:00:09.0: bridge window [mem 0xd8200000-0xd84fffff]
pci 0000:0a:00.0: [8086:3510] type 01 class 0x060400
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:00.0: System wakeup disabled by ACPI
pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:0a:02.0: [8086:3518] type 01 class 0x060400
pci 0000:0a:02.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:02.0: System wakeup disabled by ACPI
pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:09:00.0: PCI bridge to [bus 0a-0f]
pci 0000:09:00.0: bridge window [io 0x3000-0x3fff]
pci 0000:09:00.0: bridge window [mem 0xd8200000-0xd82fffff]
pci 0000:0a:00.0: PCI bridge to [bus 0b]
pci 0000:0f:00.0: [8086:1096] type 00 class 0x020000
pci 0000:0f:00.0: reg 0x10: [mem 0xd8200000-0xd821ffff]
pci 0000:0f:00.0: reg 0x18: [io 0x3000-0x301f]
pci 0000:0f:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0f:00.1: [8086:1096] type 00 class 0x020000
pci 0000:0f:00.1: reg 0x10: [mem 0xd8220000-0xd823ffff]
pci 0000:0f:00.1: reg 0x18: [io 0x3020-0x303f]
pci 0000:0f:00.1: PME# supported from D0 D3hot D3cold
pci 0000:0f:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:0a:02.0: PCI bridge to [bus 0f]
pci 0000:0a:02.0: bridge window [io 0x3000-0x3fff]
pci 0000:0a:02.0: bridge window [mem 0xd8200000-0xd82fffff]
pci 0000:10:09.0: [1000:0030] type 00 class 0x010000
pci 0000:10:09.0: reg 0x10: [io 0x4000-0x40ff]
pci 0000:10:09.0: reg 0x14: [mem 0xd8320000-0xd833ffff 64bit]
pci 0000:10:09.0: reg 0x1c: [mem 0xd8300000-0xd831ffff 64bit]
pci 0000:10:09.0: reg 0x30: [mem 0x00000000-0x003fffff pref]
pci 0000:10:09.0: supports D1 D2
pci 0000:09:00.3: PCI bridge to [bus 10]
pci 0000:09:00.3: bridge window [io 0x4000-0x4fff]
pci 0000:09:00.3: bridge window [mem 0xd8300000-0xd83fffff]
pci 0000:00:1c.0: PCI bridge to [bus 1f]
pci 0000:20:05.0: [104c:8023] type 00 class 0x0c0010
pci 0000:20:05.0: reg 0x10: [mem 0xd8604000-0xd86047ff]
pci 0000:20:05.0: reg 0x14: [mem 0xd8600000-0xd8603fff]
pci 0000:20:05.0: supports D1 D2
pci 0000:20:05.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 20] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd8600000-0xd86fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *9
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15)
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbfee0000-0xbfffffff]
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0800-0x080f] has been reserved
system 00:00: [io 0x1000-0x107f] could not be reserved
system 00:00: [io 0x1180-0x11bf] has been reserved
system 00:00: [io 0xfe00] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfec88000-0xfec88fff] could not be reserved
system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
system 00:00: [mem 0xfe600000-0xfe6fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: [dma 3]
pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:06: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
pnp: PnP ACPI: found 7 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 1f] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 1f] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 1f] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xd8520000-0xd853ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xd8500000-0xd85fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 05]
pci 0000:0a:00.0: PCI bridge to [bus 0b]
pci 0000:0a:02.0: PCI bridge to [bus 0f]
pci 0000:0a:02.0: bridge window [io 0x3000-0x3fff]
pci 0000:0a:02.0: bridge window [mem 0xd8200000-0xd82fffff]
pci 0000:09:00.0: PCI bridge to [bus 0a-0f]
pci 0000:09:00.0: bridge window [io 0x3000-0x3fff]
pci 0000:09:00.0: bridge window [mem 0xd8200000-0xd82fffff]
pci 0000:10:09.0: BAR 6: can't assign mem pref (size 0x400000)
pci 0000:09:00.3: PCI bridge to [bus 10]
pci 0000:09:00.3: bridge window [io 0x4000-0x4fff]
pci 0000:09:00.3: bridge window [mem 0xd8300000-0xd83fffff]
pci 0000:00:09.0: PCI bridge to [bus 09-10]
pci 0000:00:09.0: bridge window [io 0x3000-0x4fff]
pci 0000:00:09.0: bridge window [mem 0xd8200000-0xd84fffff]
pci 0000:00:1c.0: PCI bridge to [bus 1f]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 20]
pci 0000:00:1e.0: bridge window [mem 0xd8600000-0xd86fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xd8500000-0xd85fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0x3000-0x4fff]
pci_bus 0000:09: resource 1 [mem 0xd8200000-0xd84fffff]
pci_bus 0000:0a: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:0a: resource 1 [mem 0xd8200000-0xd82fffff]
pci_bus 0000:0f: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:0f: resource 1 [mem 0xd8200000-0xd82fffff]
pci_bus 0000:10: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:10: resource 1 [mem 0xd8300000-0xd83fffff]
pci_bus 0000:1f: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:1f: resource 1 [mem 0xc0000000-0xc01fffff]
pci_bus 0000:1f: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
pci_bus 0000:20: resource 1 [mem 0xd8600000-0xd86fffff]
pci_bus 0000:20: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:20: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:20: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:20: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:20: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:20: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:20: resource 10 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:20: resource 11 [mem 0xfed40000-0xfed44fff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS mismatch (32 != 64), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 17088K (ffff880035e90000 - ffff880036f40000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbee0000-0xbfee0000] (64MB) mapped at [ffff8800bbee0000-ffff8800bfedffff]
Simple Boot Flag at 0x40 set to 0x1
microcode: CPU0 sig=0x1067a, pf=0x40, revision=0xa0b
microcode: CPU1 sig=0x1067a, pf=0x40, revision=0xa0b
microcode: CPU2 sig=0x1067a, pf=0x40, revision=0xa0b
microcode: CPU3 sig=0x1067a, pf=0x40, revision=0xa0b
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1420777842.556:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 16004
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 23
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:01: setting system clock to 2015-01-09 04:30:43 UTC (1420777843)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1200K (ffffffff818ed000 - ffffffff81a19000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 940K (ffff880001515000 - ffff880001600000)
Freeing unused kernel memory: 220K (ffff8800017c9000 - ffff880001800000)
systemd-udevd[71]: starting version 215
random: systemd-udevd urandom read with 3 bits of entropy available
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
SCSI subsystem initialized
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
e1000e 0000:0f:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:0f:00.0: irq 65 for MSI/MSI-X
Fusion MPT SPI Host driver 3.04.20
mptbase: ioc0: Initiating bringup
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
ehci-pci: EHCI PCI platform driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:1d.7: debug port 1
libata version 3.00 loaded.
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 20, io mem 0xd8708000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
usb usb5: SerialNumber: 0000:00:1d.7
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
e1000e 0000:0f:00.0 eth0: (PCI Express:2.5GT/s:Width x4) 00:e0:81:b5:3b:3c
e1000e 0000:0f:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:0f:00.0 eth0: MAC: 5, PHY: 5, PBA No: FFFFFF-0FF
e1000e 0000:0f:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:0f:00.1: irq 66 for MSI/MSI-X
firewire_ohci 0000:20:05.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
e1000e 0000:0f:00.1 eth1: (PCI Express:2.5GT/s:Width x4) 00:e0:81:b5:3b:3d
e1000e 0000:0f:00.1 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:0f:00.1 eth1: MAC: 5, PHY: 5, PBA No: FFFFFF-0FF
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ata_piix 0000:00:1f.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata2: port disabled--ignoring
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x18c0 ctl 0x18b8 bmdma 0x18a0 irq 23
ata4: SATA max UDMA/133 cmd 0x18b0 ctl 0x1894 bmdma 0x18a8 irq 23
ata1.00: ATA-6: HDS722516VLAT80, V34OA60A, max UDMA/100
ata1.00: 321672960 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA HDS722516VLAT80 A60A PQ: 0 ANSI: 5
ioc0: LSI53C1030 C0: Capabilities={Initiator}
sd 0:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
firewire_core 0000:20:05.0: created device fw0: GUID 00e0810000295934, S400
tsc: Refined TSC clocksource calibration: 2493.749 MHz
scsi4 : ioc0: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=222, IRQ=28
Switched to clocksource tsc
scsi 4:0:0:0: Direct-Access CSC 73GB 10K REFURBISHED 0125 PQ: 0 ANSI: 3
scsi target4:0:0: Beginning Domain Validation
scsi target4:0:0: Ending Domain Validation
scsi target4:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
scsi 4:0:1:0: Direct-Access CSC 73GB 10K REFURBISHED 0125 PQ: 0 ANSI: 3
scsi target4:0:1: Beginning Domain Validation
scsi target4:0:1: Ending Domain Validation
scsi target4:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
scsi 4:0:2:0: Direct-Access CSC 73GB 10K REFURBISHED 0125 PQ: 0 ANSI: 3
scsi target4:0:2: Beginning Domain Validation
scsi target4:0:2: Ending Domain Validation
scsi target4:0:2: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
scsi 4:0:3:0: Direct-Access CSC 73GB 10K REFURBISHED 0125 PQ: 0 ANSI: 3
scsi target4:0:3: Beginning Domain Validation
scsi target4:0:3: Ending Domain Validation
scsi target4:0:3: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
scsi 4:0:4:0: Direct-Access CSC 73GB 10K REFURBISHED 0125 PQ: 0 ANSI: 3
scsi target4:0:4: Beginning Domain Validation
scsi target4:0:4: Ending Domain Validation
scsi target4:0:4: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
scsi 4:0:5:0: Direct-Access CSC 73GB 10K REFURBISHED 0125 PQ: 0 ANSI: 3
scsi target4:0:5: Beginning Domain Validation
scsi target4:0:5: Ending Domain Validation
scsi target4:0:5: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
scsi 4:0:6:0: Processor SUPER GEM318 0 PQ: 0 ANSI: 2
scsi target4:0:6: Beginning Domain Validation
scsi target4:0:6: Ending Domain Validation
scsi target4:0:6: asynchronous
floppy0: no floppy controllers found
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:1:0: Attached scsi generic sg2 type 0
sd 4:0:2:0: Attached scsi generic sg3 type 0
sd 4:0:3:0: Attached scsi generic sg4 type 0
sd 4:0:4:0: Attached scsi generic sg5 type 0
sd 4:0:5:0: Attached scsi generic sg6 type 0
scsi 4:0:6:0: Attached scsi generic sg7 type 3
sd 4:0:1:0: [sdc] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 4:0:3:0: [sde] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 4:0:2:0: [sdd] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 4:0:0:0: [sdb] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 4:0:5:0: [sdg] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 4:0:4:0: [sdf] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 4:0:1:0: [sdc] Write Protect is off
sd 4:0:1:0: [sdc] Mode Sense: ab 00 10 08
sd 4:0:3:0: [sde] Write Protect is off
sd 4:0:3:0: [sde] Mode Sense: ab 00 10 08
sd 4:0:2:0: [sdd] Write Protect is off
sd 4:0:2:0: [sdd] Mode Sense: ab 00 10 08
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: ab 00 10 08
sd 4:0:5:0: [sdg] Write Protect is off
sd 4:0:5:0: [sdg] Mode Sense: ab 00 10 08
sd 4:0:4:0: [sdf] Write Protect is off
sd 4:0:4:0: [sdf] Mode Sense: ab 00 10 08
sd 4:0:1:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 4:0:3:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 4:0:2:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 4:0:5:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 4:0:4:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
sde: sde1
sdc: sdc1
sdb: sdb1
sdd: sdd1
sdf: sdf1
sdg: sdg1
sd 4:0:3:0: [sde] Attached SCSI disk
sd 4:0:1:0: [sdc] Attached SCSI disk
sd 4:0:0:0: [sdb] Attached SCSI disk
sd 4:0:2:0: [sdd] Attached SCSI disk
sd 4:0:4:0: [sdf] Attached SCSI disk
sd 4:0:5:0: [sdg] Attached SCSI disk
random: nonblocking pool is initialized
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
raid6: sse2x1 3141 MB/s
raid6: sse2x2 6247 MB/s
raid6: sse2x4 6927 MB/s
raid6: using algorithm sse2x4 (6927 MB/s)
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 10512.000 MB/sec
generic_sse: 9278.000 MB/sec
xor: using function: prefetch64-sse (10512.000 MB/sec)
Btrfs loaded
PM: Starting manual resume from disk
PM: Hibernation image partition 8:6 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
systemd-udevd[216]: starting version 215
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to module i5400_edac.c controller I5400: DEV 0000:00:10.0 (POLLED)
EDAC PCI0: Giving out device to module i5400_edac controller EDAC PCI controller: DEV 0000:00:10.0 (POLLED)
EXT4-fs (sda1): re-mounted. Opts: (null)
snd_hda_intel 0000:00:1b.0: irq 67 for MSI/MSI-X
input: PC Speaker as /devices/platform/pcspkr/input/input3
intel_rng: FWH not detected
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
sound hdaudioC0D0: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x1e/0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Line=0x1a
sound hdaudioC0D0: CD=0x1c
sound hdaudioC0D0: Aux=0x15
sound hdaudioC0D0: dig-in=0x1f
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input4
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ppdev: user-space parallel port driver
tpm_tis 00:06: 1.2 TPM (device-id 0xB, rev-id 16)
tpm_tis 00:06: [Hardware Error]: Adjusting reported timeouts: A 750->750000us B 2000->2000000us C 750->750000us D 750->750000us
[drm] Initialized drm 1.1.0 20060810
tpm_tis 00:06: Adjusting TPM timeout parameters.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RV380 0x1002:0x5B62 0x1002:0x0F02).
[drm] register mmio base: 0xD8500000
[drm] register mmio size: 65536
[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:01:00.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used)
radeon 0000:01:00.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 4098330 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 128M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[drm] PCIE GART of 512M enabled (table at 0x00000000D0040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff8800bad5e000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 68 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] Loading R300 Microcode
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R300_cp.bin
[drm] radeon: ring at 0x00000000B0001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DVI-I-1
[drm] HPD1
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] DFP1: INTERNAL_TMDS1
[drm] Connector 1:
[drm] SVIDEO-1
[drm] Encoders:
[drm] TV1: INTERNAL_DAC2
radeon 0000:01:00.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
[drm] fb mappable at 0xD00C0000
[drm] vram apper at 0xD0000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
Adding 7905276k swap on /dev/sda6. Priority:-1 extents:1 across:7905276k FS
tpm_tis 00:06: TPM is disabled/deactivated (0x7)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
floppy0: no floppy controllers found
systemd-journald[201]: Received request to flush runtime journal from PID 1
Bridge firewalling registered
device eth1 entered promiscuous mode
e1000e 0000:0f:00.1: irq 66 for MSI/MSI-X
e1000e 0000:0f:00.1: irq 66 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:0f:00.1 eth1: Link Speed was downgraded by SmartSpeed
e1000e 0000:0f:00.1 eth1: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
br0: port 1(eth1) entered forwarding state
br0: port 1(eth1) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
e1000e 0000:0f:00.0: irq 65 for MSI/MSI-X
e1000e 0000:0f:00.0: irq 65 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
br0: port 1(eth1) entered forwarding state
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
perf interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 50000