dmesg - test01

Return To test01 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-28-generic (buildd@komainu) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #38-Ubuntu SMP Fri Dec 12 17:37:40 UTC 2014 (Ubuntu 3.16.0-28.38-generic 3.16.7-ckt1)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000aad21fff] usable
BIOS-e820: [mem 0x00000000aad22000-0x00000000aad8dfff] reserved
BIOS-e820: [mem 0x00000000aad8e000-0x00000000aad96fff] usable
BIOS-e820: [mem 0x00000000aad97000-0x00000000aad97fff] reserved
BIOS-e820: [mem 0x00000000aad98000-0x00000000aad98fff] usable
BIOS-e820: [mem 0x00000000aad99000-0x00000000aadb7fff] reserved
BIOS-e820: [mem 0x00000000aadb8000-0x00000000aadc5fff] usable
BIOS-e820: [mem 0x00000000aadc6000-0x00000000aade7fff] reserved
BIOS-e820: [mem 0x00000000aade8000-0x00000000aaf21fff] usable
BIOS-e820: [mem 0x00000000aaf22000-0x00000000aaf86fff] ACPI NVS
BIOS-e820: [mem 0x00000000aaf87000-0x00000000aaf89fff] usable
BIOS-e820: [mem 0x00000000aaf8a000-0x00000000aafe7fff] ACPI NVS
BIOS-e820: [mem 0x00000000aafe8000-0x00000000aaffcfff] usable
BIOS-e820: [mem 0x00000000aaffd000-0x00000000aaffffff] ACPI data
BIOS-e820: [mem 0x00000000ab000000-0x00000000af9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff980000-0x00000000ffbfffff] reserved
BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000014fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: ASUSTeK Computer Inc. K73SV/K73SV, BIOS K73SV.202 02/10/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x14fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FE0000000 write-back
  2 base 0A0000000 mask FF8000000 write-back
  3 base 0A8000000 mask FFC000000 write-back
  4 base 0AB000000 mask FFF000000 uncachable
  5 base 100000000 mask FC0000000 write-back
  6 base 140000000 mask FF0000000 write-back
  7 base 14FE00000 mask FFFE00000 uncachable
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2560MB, range: 128MB, type WB
reg 3, base: 2688MB, range: 64MB, type WB
reg 4, base: 2736MB, range: 16MB, type UC
reg 5, base: 4GB, range: 1GB, type WB
reg 6, base: 5GB, range: 256MB, type WB
reg 7, base: 5374MB, range: 2MB, type UC
total RAM covered: 4014M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 4M 	num_reg: 8  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2560MB, range: 128MB, type WB
reg 3, base: 2688MB, range: 32MB, type WB
reg 4, base: 2720MB, range: 16MB, type WB
reg 5, base: 4GB, range: 1GB, type WB
reg 6, base: 5GB, range: 256MB, type WB
reg 7, base: 5374MB, range: 2MB, type UC
e820: update [mem 0xab000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xaaffd max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcc40-0x000fcc4f] mapped at [ffff8800000fcc40]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
reserving inaccessible SNB gfx pages
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x14fc00000-0x14fdfffff]
 [mem 0x14fc00000-0x14fdfffff] page 2M
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0x14c000000-0x14fbfffff]
 [mem 0x14c000000-0x14fbfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x14bffffff]
 [mem 0x100000000-0x14bffffff] page 2M
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x1fffffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x3fffffff]
 [mem 0x20200000-0x3fffffff] page 2M
init_memory_mapping: [mem 0x40200000-0xaad21fff]
 [mem 0x40200000-0xaabfffff] page 2M
 [mem 0xaac00000-0xaad21fff] page 4k
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
init_memory_mapping: [mem 0xaad8e000-0xaad96fff]
 [mem 0xaad8e000-0xaad96fff] page 4k
init_memory_mapping: [mem 0xaad98000-0xaad98fff]
 [mem 0xaad98000-0xaad98fff] page 4k
init_memory_mapping: [mem 0xaadb8000-0xaadc5fff]
 [mem 0xaadb8000-0xaadc5fff] page 4k
init_memory_mapping: [mem 0xaade8000-0xaaf21fff]
 [mem 0xaade8000-0xaaf21fff] page 4k
init_memory_mapping: [mem 0xaaf87000-0xaaf89fff]
 [mem 0xaaf87000-0xaaf89fff] page 4k
init_memory_mapping: [mem 0xaafe8000-0xaaffcfff]
 [mem 0xaafe8000-0xaaffcfff] page 4k
RAMDISK: [mem 0x35902000-0x36c78fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0430 000024 (v02 _ASUS_)
ACPI: XSDT 0x00000000AAFFEE18 000074 (v01 _ASUS_ Notebook 06222004 MSFT 00010013)
ACPI: FACP 0x00000000AAF9AD98 0000F4 (v04 _ASUS_ Notebook 06222004 MSFT 00010013)
ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT: 0xAAFE4E40/0x00000000AAFE4D40, using 32-bit address (20140424/tbfadt-283)
ACPI: DSDT 0x00000000AAF67018 012D46 (v01 _ASUS_ Notebook 00000000 INTL 20091112)
ACPI: FACS 0x00000000AAFE4E40 000040
ACPI: APIC 0x00000000AAFFDF18 0000CC (v02 _ASUS_ Notebook 06222004 MSFT 00010013)
ACPI: DBGP 0x00000000AAFFFF18 000034 (v01 _ASUS_ Notebook 06222004 MSFT 00010013)
ACPI: ECDT 0x00000000AAFE4B18 0000C1 (v01 _ASUS_ Notebook 06222004 AMI. 00000003)
ACPI: SLIC 0x00000000AAF9BE18 000176 (v01 _ASUS_ Notebook 06222004 ASUS 00000001)
ACPI: HPET 0x00000000AAFE5D18 000038 (v01 _ASUS_ Notebook 06222004 AMI. 00000003)
ACPI: MCFG 0x00000000AAFE5C98 00003C (v01 _ASUS_ Notebook 06222004 MSFT 00000097)
ACPI: SSDT 0x00000000AAF86818 000787 (v01 PmRef  Cpu0Ist  00003000 INTL 20091112)
ACPI: SSDT 0x00000000AAF85018 000996 (v01 PmRef  CpuPm    00003000 INTL 20091112)
ACPI: ASF! 0x00000000AAFE4A18 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000014fdfffff]
Initmem setup node 0 [mem 0x00000000-0x14fdfffff]
  NODE_DATA [mem 0x14fdf8000-0x14fdfcfff]
 [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014b400000-ffff88014f3fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x14fdfffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009dfff]
  node   0: [mem 0x00100000-0x1fffffff]
  node   0: [mem 0x20200000-0x3fffffff]
  node   0: [mem 0x40200000-0xaad21fff]
  node   0: [mem 0xaad8e000-0xaad96fff]
  node   0: [mem 0xaad98000-0xaad98fff]
  node   0: [mem 0xaadb8000-0xaadc5fff]
  node   0: [mem 0xaade8000-0xaaf21fff]
  node   0: [mem 0xaaf87000-0xaaf89fff]
  node   0: [mem 0xaafe8000-0xaaffcfff]
  node   0: [mem 0x100000000-0x14fdfffff]
On node 0 totalpages: 1026089
  DMA zone: 64 pages used for memmap
  DMA zone: 157 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 10859 pages used for memmap
  DMA32 zone: 694924 pages, LIFO batch:31
  Normal zone: 5112 pages used for memmap
  Normal zone: 327168 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xaba00000-0xaf9fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 16 CPUs, 12 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
PM: Registered nosave memory: [mem 0xaad22000-0xaad8dfff]
PM: Registered nosave memory: [mem 0xaad97000-0xaad97fff]
PM: Registered nosave memory: [mem 0xaad99000-0xaadb7fff]
PM: Registered nosave memory: [mem 0xaadc6000-0xaade7fff]
PM: Registered nosave memory: [mem 0xaaf22000-0xaaf86fff]
PM: Registered nosave memory: [mem 0xaaf8a000-0xaafe7fff]
PM: Registered nosave memory: [mem 0xaaffd000-0xaaffffff]
PM: Registered nosave memory: [mem 0xab000000-0xaf9fffff]
PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
PM: Registered nosave memory: [mem 0xe4000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
PM: Registered nosave memory: [mem 0xff980000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffd7ffff]
PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88014fa00000 s83328 r8192 d23168 u131072
pcpu-alloc: s83328 r8192 d23168 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1009897
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3933904K/4104356K available (7740K kernel code, 1200K rwdata, 3608K rodata, 1356K init, 1308K bss, 170452K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-15.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS:16640 nr_irqs:808 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2294.747 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.49 BogoMIPS (lpj=9178988)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e81000 - ffffffff81e89000)
ftrace: allocating 29302 entries in 115 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  #2  #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (18357.97 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xaaf22000-0xaaf86fff] (413696 bytes)
PM: Registering ACPI NVS region [mem 0xaaf8a000-0xaafe7fff] (385024 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 22:50:02, date: 01/02/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880149021800 000694 (v01 PmRef  Cpu0Cst  00003001 INTL 20091112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880149069C00 000303 (v01 PmRef  ApIst    00003000 INTL 20091112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88014902B600 000119 (v01 PmRef  ApCst    00003000 INTL 20091112)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0 
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xdd400000-0xdd7fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0xe000-0xe03f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf60b000-0xdf60b00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xdf608000-0xdf6083ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xdf600000-0xdf603fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xdf607000-0xdf6073ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xe0b0-0xe0b7]
pci 0000:00:1f.2: reg 0x14: [io  0xe0a0-0xe0a3]
pci 0000:00:1f.2: reg 0x18: [io  0xe090-0xe097]
pci 0000:00:1f.2: reg 0x1c: [io  0xe080-0xe083]
pci 0000:00:1f.2: reg 0x20: [io  0xe060-0xe07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xdf606000-0xdf6067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xdf605000-0xdf6050ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xe040-0xe05f]
pci 0000:01:00.0: [10de:0df4] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xdc000000-0xdcffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xd000-0xd07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdd000000-0xdd07ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.0:   bridge window [mem 0xdc000000-0xdd0fffff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.0:   bridge window [mem 0xdec00000-0xdf5fffff]
pci 0000:00:1c.0:   bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xde200000-0xde20ffff 64bit]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.1:   bridge window [mem 0xde200000-0xdebfffff]
pci 0000:00:1c.1:   bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
pci 0000:04:00.0: [1969:1083] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xdd800000-0xdd83ffff 64bit]
pci 0000:04:00.0: reg 0x18: [io  0xa000-0xa07f]
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.5:   bridge window [mem 0xdd800000-0xde1fffff]
pci 0000:00:1c.5:   bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 12)
ACPI: Enabled 3 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xaad22000-0xabffffff]
e820: reserve RAM buffer [mem 0xaad97000-0xabffffff]
e820: reserve RAM buffer [mem 0xaad99000-0xabffffff]
e820: reserve RAM buffer [mem 0xaadc6000-0xabffffff]
e820: reserve RAM buffer [mem 0xaaf22000-0xabffffff]
e820: reserve RAM buffer [mem 0xaaf8a000-0xabffffff]
e820: reserve RAM buffer [mem 0xaaffd000-0xabffffff]
e820: reserve RAM buffer [mem 0x14fe00000-0x14fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io  0x0680-0x069f] has been reserved
system 00:00: [io  0x1000-0x100f] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0x0400-0x0453] could not be reserved
system 00:00: [io  0x0458-0x047f] has been reserved
system 00:00: [io  0x0500-0x057f] has been reserved
system 00:00: [io  0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io  0x0454-0x0457] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:03: [io  0x0240-0x0259] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs ETD0101 PNP0f0e PNP0f03 PNP0f12 PNP0f0b PNP0f13 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed17fff] could not be reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xafa00000-0xafa00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x20000000-0x201fffff] has been reserved
system 00:08: [mem 0x40000000-0x401fffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.0:   bridge window [mem 0xdc000000-0xdd0fffff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.0:   bridge window [mem 0xdec00000-0xdf5fffff]
pci 0000:00:1c.0:   bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.1:   bridge window [mem 0xde200000-0xdebfffff]
pci 0000:00:1c.1:   bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.5:   bridge window [mem 0xdd800000-0xde1fffff]
pci 0000:00:1c.5:   bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xafa00000-0xfeafffff]
pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xdc000000-0xdd0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xdec00000-0xdf5fffff]
pci_bus 0000:02: resource 2 [mem 0xd3700000-0xd40fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xde200000-0xdebfffff]
pci_bus 0000:03: resource 2 [mem 0xd2c00000-0xd35fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xdd800000-0xde1fffff]
pci_bus 0000:04: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19932K (ffff880035902000 - ffff880036c79000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa6d22000-0xaad22000] (64MB) mapped at [ffff8800a6d22000-ffff8800aad21fff]
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1420239003.124:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 7722
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90004800000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC0] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (57 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery absent)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xdf608000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-28-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xdf607000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-28-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: af30e7f37b41301c96f985f4789da5f4373e9e92'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 15:240:855
rtc_cmos 00:01: setting system clock to 2015-01-02 22:50:03 UTC (1420239003)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1356K (ffffffff81d2e000 - ffffffff81e81000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 440K (ffff880001792000 - ffff880001800000)
Freeing unused kernel memory: 488K (ffff880001b86000 - ffff880001c00000)
systemd-udevd[139]: starting version 208
random: systemd-udevd urandom read with 2 bits of entropy available
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdf606000 port 0xdf606100 irq 41
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xdf606000 port 0xdf606200 irq 41
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
atl1c 0000:04:00.0: version 1.0.1.1-NAPI
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ATAPI: SlimtypeDVD A  DS8A5SH, XAA2, max UDMA/100
ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/100
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-8: FUJITSU MHZ2160BH G2, 8909, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHZ2160B 8909 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: CD-ROM            Slimtype DVD A  DS8A5SH   XAA2 PQ: 0 ANSI: 5
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
 sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 1-1.1: new full-speed USB device number 3 using ehci-pci
usb 1-1.1: New USB device found, idVendor=0cf3, idProduct=3005
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-1.2: new high-speed USB device number 4 using ehci-pci
tsc: Refined TSC clocksource calibration: 2294.786 MHz
psmouse serio4: elantech: assuming hardware version 3 (with firmware version 0x450f01)
psmouse serio4: elantech: Synaptics capabilities query result 0x78, 0x15, 0x0c.
usb 1-1.2: New USB device found, idVendor=13d3, idProduct=5710
usb 1-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-1.2: Product: USB 2.0 UVC VGA WebCam
usb 1-1.2: Manufacturer: Azurewave
usb 1-1.2: SerialNumber: 0x0001
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input11
usb 2-1.2: new low-speed USB device number 3 using ehci-pci
usb 2-1.2: New USB device found, idVendor=046d, idProduct=c018
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: USB Optical Mouse
usb 2-1.2: Manufacturer: Logitech
Switched to clocksource tsc
random: nonblocking pool is initialized
init: plymouth-upstart-bridge main process (215) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (232) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (236) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (237) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (239) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (240) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (242) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (243) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (245) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (246) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (248) terminated with status 1
init: plymouth-upstart-bridge respawning too fast, stopped
Adding 4102140k swap on /dev/sda5.  Priority:-1 extents:1 across:4102140k FS
systemd-udevd[359]: starting version 208
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
wmi: Mapper loaded
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000044f (\GPIS) (20140424/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140424/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140424/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140424/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
cfg80211: Calling CRDA to update world regulatory domain
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
checking generic (b0000000 300000) vs hw (b0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C018.0001/input/input12
hid-generic 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
asus_wmi: ASUS WMI generic driver loaded
i915 0000:00:02.0: irq 43 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
asus_wmi: Initialization: 0x1
asus_wmi: BIOS WMI version: 7.6
asus_wmi: SFUN value: 0x1a0877
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input13
media: Linux media interface: v0.10
[drm] Wrong MCH_SSKPD value: 0x16040307
[drm] This can cause pipe underruns and display issues.
[drm] Please upgrade your BIOS to fix this.
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 200x56
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
acpi device:03: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input14
ath: phy0: Set BT/WLAN RX diversity capability
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
acpi device:44: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
asus_wmi: Backlight controlled by ACPI video driver
Linux video capture interface: v2.00
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90004b20000, irq=17
MXM: GUID detected in BIOS
ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000003) is beyond end of object (length 0x0) (20140424/exoparg2-420)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff88014b03abb8), AE_AML_PACKAGE_LIMIT (20140424/psparse-536)
ACPI: \_SB_.PCI0.GFX0: failed to evaluate _DSM (0x300b)
ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power, 
ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000003) is beyond end of object (length 0x0) (20140424/exoparg2-420)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff88014b03abb8), AE_AML_PACKAGE_LIMIT (20140424/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.GFX0._DSM] (Node ffff88014b051190), AE_AML_PACKAGE_LIMIT (20140424/psparse-536)
ACPI: \_SB_.PCI0.PEG0.GFX0: failed to evaluate _DSM (0x300b)
ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, 
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.GFX0 handle
nouveau 0000:01:00.0: enabling device (0004 -> 0007)
nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0c1a00a1
nouveau  [  DEVICE][0000:01:00.0] Chipset: GF108 (NVC1)
nouveau  [  DEVICE][0000:01:00.0] Family : NVC0
nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
nouveau  [   VBIOS][0000:01:00.0] ... signature not found
nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
nouveau  [   VBIOS][0000:01:00.0] ... signature not found
nouveau  [   VBIOS][0000:01:00.0] checking ACPI for image...
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam (13d3:5710)
nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
nouveau  [   VBIOS][0000:01:00.0] using image from ACPI
nouveau  [   VBIOS][0000:01:00.0] BIT signature found
nouveau  [   VBIOS][0000:01:00.0] version 70.08.4c.00.a4
nouveau  [ DEVINIT][0000:01:00.0] adaptor not initialised
nouveau  [   VBIOS][0000:01:00.0] running init tables
input: USB 2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input16
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    mono: mono_out=0x0
sound hdaudioC0D0:    inputs:
sound hdaudioC0D0:      Internal Mic=0x19
sound hdaudioC0D0:      Mic=0x18
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
nouveau 0000:01:00.0: irq 45 for MSI/MSI-X
nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
nouveau W[     PFB][0000:01:00.0][0x00000000][ffff8800a4849000] reclocking of this ram type unsupported
nouveau  [     PFB][0000:01:00.0] RAM type: DDR3
nouveau  [     PFB][0000:01:00.0] RAM size: 512 MiB
nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
nouveau  [    VOLT][0000:01:00.0] GPU voltage: 1000000uv
nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
nouveau  [     CLK][0000:01:00.0] 03: core 50 MHz memory 135 MHz 
nouveau  [     CLK][0000:01:00.0] 07: core 202 MHz memory 324 MHz 
nouveau  [     CLK][0000:01:00.0] 0f: core 672 MHz memory 900 MHz 
nouveau  [     CLK][0000:01:00.0] --: core 202 MHz memory 324 MHz 
vga_switcheroo: enabled
[TTM] Zone  kernel: Available graphics memory: 1978076 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau  [     DRM] VRAM: 512 MiB
nouveau  [     DRM] GART: 1048576 MiB
nouveau  [     DRM] TMDS table version 2.0
nouveau  [     DRM] DCB version 4.0
nouveau  [     DRM] DCB outp 00: 02010300 00000000
nouveau  [     DRM] DCB conn 00: 00000000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau  [     DRM] MM: using COPY0 for buffer copies
nouveau  [     DRM] allocated 1024x768 fb: 0x60000, bo ffff880147ddd800
nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 1
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
audit: type=1400 audit(1420239016.128:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=489 comm="apparmor_parser"
audit: type=1400 audit(1420239016.128:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=489 comm="apparmor_parser"
audit: type=1400 audit(1420239016.128:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=489 comm="apparmor_parser"
audit: type=1400 audit(1420239016.128:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=485 comm="apparmor_parser"
audit: type=1400 audit(1420239016.128:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=485 comm="apparmor_parser"
audit: type=1400 audit(1420239016.128:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=485 comm="apparmor_parser"
audit: type=1400 audit(1420239016.128:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=570 comm="apparmor_parser"
audit: type=1400 audit(1420239016.128:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=570 comm="apparmor_parser"
audit: type=1400 audit(1420239016.128:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=570 comm="apparmor_parser"
init: avahi-cups-reload main process (663) terminated with status 1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
audit: type=1400 audit(1420239017.228:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=647 comm="apparmor_parser"
init: failsafe main process (653) killed by TERM signal
ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
audit_printk_skb: 39 callbacks suppressed
audit: type=1400 audit(1420239021.208:25): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=823 comm="apparmor_parser"
audit: type=1400 audit(1420239021.208:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=823 comm="apparmor_parser"
audit: type=1400 audit(1420239021.208:27): apparmor="STATUS" operation="profile_load" profile="unconfined" name="pxgsettings" pid=823 comm="apparmor_parser"
audit: type=1400 audit(1420239021.208:28): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=823 comm="apparmor_parser"
audit: type=1400 audit(1420239021.208:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=823 comm="apparmor_parser"
audit: type=1400 audit(1420239021.504:30): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=823 comm="apparmor_parser"
audit: type=1400 audit(1420239021.508:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=823 comm="apparmor_parser"
audit: type=1400 audit(1420239021.508:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=823 comm="apparmor_parser"
audit: type=1400 audit(1420239021.524:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="third_party" pid=823 comm="apparmor_parser"
audit: type=1400 audit(1420239021.652:34): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=823 comm="apparmor_parser"
systemd-logind[897]: New seat seat0.
systemd-logind[897]: Watching system buttons on /dev/input/event2 (Power Button)
systemd-logind[897]: Watching system buttons on /dev/input/event8 (Video Bus)
systemd-logind[897]: Watching system buttons on /dev/input/event7 (Video Bus)
systemd-logind[897]: Watching system buttons on /dev/input/event0 (Lid Switch)
systemd-logind[897]: Watching system buttons on /dev/input/event1 (Sleep Button)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
atl1c 0000:04:00.0: irq 46 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: authenticate with 00:19:70:aa:12:24
wlan0: send auth to 00:19:70:aa:12:24 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:19:70:aa:12:24 (try 1/3)
wlan0: RX AssocResp from 00:19:70:aa:12:24 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: FR
ath: EEPROM regdomain: 0x80fa
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: FR
ath: Regpair used: 0x37
ath: regdomain 0x80fa dynamically updated by country IE
cfg80211: Regulatory domain changed to country: FR
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
systemd-logind[897]: Failed to start unit user@112.service: Unknown unit: user@112.service
systemd-logind[897]: Failed to start user service: Unknown unit: user@112.service
systemd-logind[897]: New session c1 of user lightdm.
systemd-logind[897]: Linked /tmp/.X11-unix/X0 to /run/user/112/X11-display.
ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
systemd-logind[897]: Failed to start unit user@1000.service: Unknown unit: user@1000.service
systemd-logind[897]: Failed to start user service: Unknown unit: user@1000.service
systemd-logind[897]: New session c2 of user regis.
systemd-logind[897]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.

Return To test01 System Information