dmesg - tremtesting
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-37-generic (buildd@kapok) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #64-Ubuntu SMP Mon Sep 22 21:28:38 UTC 2014 (Ubuntu 3.13.0-37.64-generic 3.13.11.7)
Command line: initrd=/ubninit file=/cdrom/preseed/linuxmint.seed boot=casper quiet splash -- BOOT_IMAGE=/ubnkern
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e3000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cff8ffff] usable
BIOS-e820: [mem 0x00000000cff90000-0x00000000cffa7fff] ACPI data
BIOS-e820: [mem 0x00000000cffa8000-0x00000000cffdffff] ACPI NVS
BIOS-e820: [mem 0x00000000cffe0000-0x00000000cffedfff] reserved
BIOS-e820: [mem 0x00000000cfff0000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/M4N78-AM V2, BIOS 1102 06/10/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000130000000 aka 4864M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcff90 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[mem 0x12fe00000-0x12fffffff] page 2M
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
[mem 0x12c000000-0x12fdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x12bffffff]
[mem 0x100000000-0x12bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcff8ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcff8ffff] page 4k
RAMDISK: [mem 0x7ec5c000-0x7fffefff]
ACPI: RSDP 00000000000fb910 000024 (v02 ACPIAM)
ACPI: XSDT 00000000cff90100 00006C (v01 061010 XSDT2014 20100610 MSFT 00000097)
ACPI: FACP 00000000cff90290 0000F4 (v03 061010 FACP2014 20100610 MSFT 00000097)
ACPI: DSDT 00000000cff90460 009F22 (v01 A1393 A1393000 00000000 INTL 20060113)
ACPI: FACS 00000000cffa8000 000040
ACPI: APIC 00000000cff90390 000090 (v01 061010 APIC2014 20100610 MSFT 00000097)
ACPI: MCFG 00000000cff90420 00003C (v01 061010 OEMMCFG 20100610 MSFT 00000097)
ACPI: OEMB 00000000cffa8040 00007A (v01 061010 OEMB2014 20100610 MSFT 00000097)
ACPI: SRAT 00000000cff9a390 0000E8 (v01 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET 00000000cff9a480 000038 (v01 061010 OEMHPET0 20100610 MSFT 00000097)
ACPI: INFO 00000000cffa80c0 000124 (v01 061010 AMDINFO 20100610 MSFT 00000097)
ACPI: NVHD 00000000cffa81f0 000284 (v01 061010 NVHDCP 20100610 MSFT 00000097)
ACPI: SSDT 00000000cff9a4c0 00088C (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x12fffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff]
NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x12fffffff] -> [mem 0x00000000-0x12fffffff]
Initmem setup node 0 [mem 0x00000000-0x12fffffff]
NODE_DATA [mem 0x12fff9000-0x12fffdfff]
[ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x12fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xcff8ffff]
node 0: [mem 0x100000000-0x12fffffff]
On node 0 totalpages: 1048365
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 13247 pages used for memmap
DMA32 zone: 847760 pages, LIFO batch:31
Normal zone: 3072 pages used for memmap
Normal zone: 196608 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
smpboot: Allowing 6 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e2fff]
PM: Registered nosave memory: [mem 0x000e3000-0x000fffff]
PM: Registered nosave memory: [mem 0xcff90000-0xcffa7fff]
PM: Registered nosave memory: [mem 0xcffa8000-0xcffdffff]
PM: Registered nosave memory: [mem 0xcffe0000-0xcffedfff]
PM: Registered nosave memory: [mem 0xcffee000-0xcffeffff]
PM: Registered nosave memory: [mem 0xcfff0000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffefffff]
PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
e820: [mem 0xd0000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88012fc00000 s86400 r8192 d24192 u262144
pcpu-alloc: s86400 r8192 d24192 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031961
Policy zone: Normal
Kernel command line: initrd=/ubninit file=/cdrom/preseed/linuxmint.seed boot=casper quiet splash -- BOOT_IMAGE=/ubnkern
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ e80a000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Memory: 3958888K/4193460K available (7375K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1444K bss, 234572K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-5.
NR_IRQS:16640 nr_irqs:728 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3014.789 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6029.57 BogoMIPS (lpj=12059156)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28541 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) II X4 640 Processor (fam: 10, model: 05, stepping: 03)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (24118.31 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcffa8000-0xcffdffff] (229376 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 11:56:16, date: 12/24/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [1000, ffffff]
node 0 link 0: io port [1000, 1fff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, fe0bffff] ==> [d0000000, dfffffff] and [f0000000, fe0bffff]
TOM2: 0000000130000000 aka 4864M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x130000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PCIeCapability]
acpi PNP0A03:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:00: _OSC: platform willing to grant [PME AER]
acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [10de:0754] type 00 class 0x050000
pci 0000:00:01.0: [10de:075d] type 00 class 0x060100
pci 0000:00:01.0: reg 0x10: [io 0x0900-0x09ff]
pci 0000:00:01.1: [10de:0752] type 00 class 0x0c0500
pci 0000:00:01.1: reg 0x10: [io 0x0e00-0x0e3f]
pci 0000:00:01.1: reg 0x20: [io 0x0600-0x063f]
pci 0000:00:01.1: reg 0x24: [io 0x0700-0x073f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:01.2: [10de:0751] type 00 class 0x050000
pci 0000:00:01.3: [10de:0753] type 00 class 0x0b4000
pci 0000:00:01.3: reg 0x10: [mem 0xfbd80000-0xfbdfffff]
pci 0000:00:01.4: [10de:0568] type 00 class 0x050000
pci 0000:00:02.0: [10de:077b] type 00 class 0x0c0310
pci 0000:00:02.0: reg 0x10: [mem 0xfbd7e000-0xfbd7efff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:02.1: [10de:077c] type 00 class 0x0c0320
pci 0000:00:02.1: reg 0x10: [mem 0xfbd7fc00-0xfbd7fcff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: System wakeup disabled by ACPI
pci 0000:00:04.0: [10de:077d] type 00 class 0x0c0310
pci 0000:00:04.0: reg 0x10: [mem 0xfbd7d000-0xfbd7dfff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:04.1: [10de:077e] type 00 class 0x0c0320
pci 0000:00:04.1: reg 0x10: [mem 0xfbd7f800-0xfbd7f8ff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: System wakeup disabled by ACPI
pci 0000:00:06.0: [10de:0759] type 00 class 0x01018a
pci 0000:00:06.0: reg 0x20: [io 0xffa0-0xffaf]
pci 0000:00:07.0: [10de:0774] type 00 class 0x040300
pci 0000:00:07.0: reg 0x10: [mem 0xfbd78000-0xfbd7bfff]
pci 0000:00:07.0: PME# supported from D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:08.0: [10de:075a] type 01 class 0x060401
pci 0000:00:08.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [10de:0ad0] type 00 class 0x010185
pci 0000:00:09.0: reg 0x10: [io 0xd080-0xd087]
pci 0000:00:09.0: reg 0x14: [io 0xd000-0xd003]
pci 0000:00:09.0: reg 0x18: [io 0xcc00-0xcc07]
pci 0000:00:09.0: reg 0x1c: [io 0xc880-0xc883]
pci 0000:00:09.0: reg 0x20: [io 0xc800-0xc80f]
pci 0000:00:09.0: reg 0x24: [mem 0xfbd76000-0xfbd77fff]
pci 0000:00:0a.0: [10de:0760] type 00 class 0x020000
pci 0000:00:0a.0: reg 0x10: [mem 0xfbd7c000-0xfbd7cfff]
pci 0000:00:0a.0: reg 0x14: [io 0xc480-0xc487]
pci 0000:00:0a.0: reg 0x18: [mem 0xfbd7f400-0xfbd7f4ff]
pci 0000:00:0a.0: reg 0x1c: [mem 0xfbd7f000-0xfbd7f00f]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:10.0: [10de:0778] type 01 class 0x060400
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:12.0: [10de:075b] type 01 class 0x060400
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:00:08.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:08.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:08.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:08.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
pci 0000:00:08.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci 0000:02:00.0: [1002:683d] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 0x18: [mem 0xfbe80000-0xfbebffff 64bit]
pci 0000:02:00.0: reg 0x20: [io 0xe800-0xe8ff]
pci 0000:02:00.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot
pci 0000:02:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:02:00.1: reg 0x10: [mem 0xfbefc000-0xfbefffff 64bit]
pci 0000:02:00.1: supports D1 D2
pci 0000:00:10.0: PCI bridge to [bus 02]
pci 0000:00:10.0: bridge window [io 0xe000-0xefff]
pci 0000:00:10.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:10.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: [168c:0030] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xfbfe0000-0xfbffffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xfbfd0000-0xfbfdffff pref]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:12.0: PCI bridge to [bus 03]
pci 0000:00:12.0: bridge window [mem 0xfbf00000-0xfbffffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
ACPI: Enabled 1 GPEs in block 20 to 5F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcff90000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:04: disabling [io 0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
pnp 00:04: disabling [io 0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x0800-0x080f] has been reserved
system 00:04: [io 0x0500-0x057f] could not be reserved
system 00:04: [io 0x0580-0x05ff] has been reserved
system 00:04: [io 0x0800-0x087f] could not be reserved
system 00:04: [io 0x0880-0x08ff] has been reserved
system 00:04: [io 0x0d00-0x0d7f] has been reserved
system 00:04: [io 0x0d80-0x0dff] has been reserved
system 00:04: [mem 0x000d0000-0x000d3fff window] has been reserved
system 00:04: [mem 0x000d4000-0x000d7fff window] has been reserved
system 00:04: [mem 0x000de000-0x000dffff window] has been reserved
system 00:04: [mem 0xfed04000-0xfed04fff] has been reserved
system 00:04: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x0290-0x0297] has been reserved
system 00:09: [io 0x02a0-0x02af] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0b: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:08.0: PCI bridge to [bus 01]
pci 0000:00:10.0: PCI bridge to [bus 02]
pci 0000:00:10.0: bridge window [io 0xe000-0xefff]
pci 0000:00:10.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:10.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:12.0: PCI bridge to [bus 03]
pci 0000:00:12.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20
pci 0000:00:08.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Enabling HT MSI Mapping
pci 0000:00:0a.0: Enabling HT MSI Mapping
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20108K (ffff88007ec5c000 - ffff88007ffff000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
microcode: CPU0: patch_level=0x010000b6
microcode: CPU1: patch_level=0x010000b6
microcode: CPU2: patch_level=0x010000b6
microcode: CPU3: patch_level=0x010000b6
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1419422179.648:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 7900
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:02.1: EHCI Host Controller
ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:02.1: debug port 1
ehci-pci 0000:00:02.1: cache line size of 64 is not supported
ehci-pci 0000:00:02.1: irq 22, io mem 0xfbd7fc00
ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:04.1: EHCI Host Controller
ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:04.1: debug port 1
ehci-pci 0000:00:04.1: cache line size of 64 is not supported
ehci-pci 0000:00:04.1: irq 20, io mem 0xfbd7f800
ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:04.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:02.0: OHCI PCI host controller
ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:02.0: irq 23, io mem 0xfbd7e000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.13.0-37-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:02.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci-pci 0000:00:04.0: OHCI PCI host controller
ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:04.0: irq 21, io mem 0xfbd7d000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.13.0-37-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:04.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 10:896:934
rtc_cmos 00:06: setting system clock to 2014-12-24 11:56:20 UTC (1419422180)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
systemd-udevd[119]: starting version 204
wmi: Mapper loaded
pata_amd 0000:00:06.0: version 0.4.1
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (VERDE 0x1002:0x683D 0x1043:0x300B).
[drm] register mmio base: 0xFBE80000
[drm] register mmio size: 262144
radeon 0000:02:00.0: Invalid ROM contents
ATOM BIOS: 683DHB.15.43.0.2.AS01
radeon 0000:02:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:02:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 2023906 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading VERDE Microcode
[drm] radeon/VERDE_mc2.bin: 31500 bytes
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] probing gen 2 caps for device 10de:778 = 313d02/0
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
radeon 0000:02:00.0: WB enabled
radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88012847ac00
radeon 0000:02:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88012847ac04
radeon 0000:02:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88012847ac08
radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88012847ac0c
radeon 0000:02:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88012847ac10
radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc900108b5a18
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:02:00.0: irq 40 for MSI/MSI-X
radeon 0000:02:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
ata2: port disabled--ignoring
usb 1-5: new high-speed USB device number 3 using ehci-pci
usb 1-5: New USB device found, idVendor=1307, idProduct=0165
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Intenso Rainbow Line
usb 1-5: Manufacturer: USBest Technology
usb 1-5: SerialNumber: 08090400260520
usb-storage 1-5:1.0: USB Mass Storage device detected
scsi2 : usb-storage 1-5:1.0
usbcore: registered new interface driver usb-storage
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 1, addr 48:5b:39:95:b9:ee
forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
ahci 0000:00:09.0: version 3.0
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
ahci 0000:00:09.0: irq 41 for MSI/MSI-X
ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0xf impl IDE mode
ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio boh
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
ata3: SATA max UDMA/133 abar m8192@0xfbd76000 port 0xfbd76100 irq 41
ata4: SATA max UDMA/133 abar m8192@0xfbd76000 port 0xfbd76180 irq 41
ata5: SATA max UDMA/133 abar m8192@0xfbd76000 port 0xfbd76200 irq 41
ata6: SATA max UDMA/133 abar m8192@0xfbd76000 port 0xfbd76280 irq 41
ata7: DUMMY
ata8: DUMMY
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 1 usecs
tsc: Refined TSC clocksource calibration: 3015.000 MHz
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] Enabling audio 1 support
[drm] Enabling audio 2 support
[drm] Enabling audio 3 support
[drm] Enabling audio 4 support
[drm] Enabling audio 5 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD10EURS-730AB1, 80.00A80, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD10EURS-730 80.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sda] 4096-byte physical blocks
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: ATAPI iHAS124 B, AL0F, max UDMA/100
ata5.00: configured for UDMA/100
scsi 5:0:0:0: CD-ROM ATAPI iHAS124 B AL0F PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg1 type 5
usb 4-2: new full-speed USB device number 2 using ohci-pci
usb 4-2: New USB device found, idVendor=04d9, idProduct=a070
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: USB Gaming Mouse
usb 4-2: Manufacturer: Holtek
hidraw: raw HID events driver (C) Jiri Kosina
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 1 usecs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.0/input/input5
hid-generic 0003:04D9:A070.0001: input,hidraw0: USB HID v1.10 Keyboard [Holtek USB Gaming Mouse] on usb-0000:00:04.0-2/input0
input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.1/input/input6
hid-generic 0003:04D9:A070.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Holtek USB Gaming Mouse] on usb-0000:00:04.0-2/input1
hid-generic 0003:04D9:A070.0003: hiddev0,hidraw2: USB HID v1.10 Device [Holtek USB Gaming Mouse] on usb-0000:00:04.0-2/input2
sda: sda1 sda2 sda3 < sda5 sda6 >
sd 3:0:0:0: [sda] Attached SCSI disk
scsi 2:0:0:0: Direct-Access Intenso Rainbow 0.00 PQ: 0 ANSI: 2
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdb] 15794176 512-byte logical blocks: (8.08 GB/7.53 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 2:0:0:0: [sdb] Asking for cache data failed
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Asking for cache data failed
sd 2:0:0:0: [sdb] Assuming drive cache: write through
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD4
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-D-1
[drm] HPD2
[drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD1
[drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 10de:778 = 313d02/0
usb 3-2: new low-speed USB device number 2 using ohci-pci
sdb: sdb1
sd 2:0:0:0: [sdb] Asking for cache data failed
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
usb 3-2: New USB device found, idVendor=046d, idProduct=c31c
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Keyboard
usb 3-2: Manufacturer: Logitech
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/input/input7
hid-generic 0003:046D:C31C.0004: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:02.0-2/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.1/input/input8
hid-generic 0003:046D:C31C.0005: input,hidraw4: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:02.0-2/input1
Switched to clocksource tsc
random: nonblocking pool is initialized
[drm] radeon: dpm initialized
[drm] fb mappable at 0xD1488000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:02:00.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:02:00.0 on minor 0
EXT4-fs (sda6): INFO: recovery required on readonly filesystem
EXT4-fs (sda6): write access will be enabled during recovery
EXT4-fs (sda6): orphan cleanup on readonly fs
EXT4-fs (sda6): 5 orphan inodes deleted
EXT4-fs (sda6): recovery complete
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Adding 3905532k swap on /dev/sda5. Priority:-1 extents:1 across:3905532k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[1016]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:03: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP]
lp0: using parport0 (interrupt-driven).
i2c i2c-9: nForce2 SMBus adapter at 0x600
ACPI Warning: 0x0000000000000700-0x000000000000073f SystemIO conflicts with Region \_SB_.PCI0.SM00 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
init: cups main process (1109) killed by HUP signal
init: cups main process ended, respawning
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
MCE: In-kernel MCE decoding enabled.
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
cfg80211: Calling CRDA to update world regulatory domain
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
device-mapper: multipath: version 1.6.0 loaded
ath: EEPROM regdomain: 0x21
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: AU
ath: Regpair used: 0x21
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffc90011540000, irq=18
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: AU
cfg80211: Regulatory domain changed to country: AU
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
hda_intel: Disabling MSI
hda-intel 0000:00:07.0: Disabling 64bit DMA
hda-intel 0000:00:07.0: Enable delay in RIRB handling
init: failsafe main process (1261) killed by TERM signal
autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x20/0x0
inputs:
Rear Mic=0x1a
Front Mic=0x1e
Line=0x1b
CD=0x1f
forcedeth 0000:00:0a.0: irq 42 for MSI/MSI-X
forcedeth 0000:00:0a.0 eth0: MSI enabled
forcedeth 0000:00:0a.0 eth0: no link during initialization
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: samba-ad-dc main process (1490) terminated with status 1
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input13
input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:07.0/sound/card0/input12
input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input11
input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
ACPI: PCI Interrupt Link [LN0B] enabled at IRQ 17
hda-intel 0000:02:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:02:00.1: Using LPIB position fix
hda-intel 0000:02:00.1: Force to non-snoop mode
snd_hda_intel 0000:02:00.1: irq 43 for MSI/MSI-X
hda-intel 0000:02:00.1: Enable sync_write for stable communication
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card1/input19
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card1/input18
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card1/input17
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card1/input16
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card1/input15
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card1/input14
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (2171) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: alsa-restore main process (1836) terminated with status 99
[drm:dce6_afmt_write_speaker_allocation] *ERROR* Couldn't read Speaker Allocation Data Block: 0
[drm:dce6_afmt_write_sad_regs] *ERROR* Couldn't read SADs: 0
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
UDF-fs: INFO Mounting volume 'STAR_TREK_INTO_DARKNESS', timestamp 2013/07/29 09:20 (1000)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
systemd-hostnamed[3546]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
wlan0: authenticate with 74:31:70:24:95:44
wlan0: send auth to 74:31:70:24:95:44 (try 1/3)
wlan0: authenticated
wlan0: associate with 74:31:70:24:95:44 (try 1/3)
wlan0: RX AssocResp from 74:31:70:24:95:44 (capab=0x411 status=0 aid=5)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
systemd-hostnamed[4738]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
[drm:dce6_afmt_write_speaker_allocation] *ERROR* Couldn't read Speaker Allocation Data Block: 0
[drm:dce6_afmt_write_sad_regs] *ERROR* Couldn't read SADs: 0
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
[drm:dce6_afmt_write_speaker_allocation] *ERROR* Couldn't read Speaker Allocation Data Block: 0
[drm:dce6_afmt_write_sad_regs] *ERROR* Couldn't read SADs: 0
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD