dmesg - linuxsystem-SP
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.13-100.SD12.i686.PAE (mockbuilder@spglinux) (gcc version 4.7.2 20120921 (Red Hat 4.7.2-2) (GCC) ) #1 SMP Tue Dec 10 21:53:02 CST 2013
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cd5c9fff] usable
BIOS-e820: [mem 0x00000000cd5ca000-0x00000000cd5d0fff] ACPI NVS
BIOS-e820: [mem 0x00000000cd5d1000-0x00000000cdf6bfff] usable
BIOS-e820: [mem 0x00000000cdf6c000-0x00000000ce2ecfff] reserved
BIOS-e820: [mem 0x00000000ce2ed000-0x00000000de176fff] usable
BIOS-e820: [mem 0x00000000de177000-0x00000000de200fff] reserved
BIOS-e820: [mem 0x00000000de201000-0x00000000de366fff] usable
BIOS-e820: [mem 0x00000000de367000-0x00000000de88dfff] ACPI NVS
BIOS-e820: [mem 0x00000000de88e000-0x00000000deffefff] reserved
BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Dell Inc. Vostro 3900 /0T1D10 , BIOS A05 04/04/2014
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x11f000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7F00000000 write-back
1 base 0100000000 mask 7FF0000000 write-back
2 base 0110000000 mask 7FF8000000 write-back
3 base 0118000000 mask 7FFC000000 write-back
4 base 011C000000 mask 7FFE000000 write-back
5 base 011E000000 mask 7FFF000000 write-back
6 base 00E0000000 mask 7FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 4GB, range: 256MB, type WB
reg 2, base: 4352MB, range: 128MB, type WB
reg 3, base: 4480MB, range: 64MB, type WB
reg 4, base: 4544MB, range: 32MB, type WB
reg 5, base: 4576MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
total RAM covered: 4080M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 512MB, type WB
reg 4, base: 4592MB, range: 16MB, type UC
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
found SMP MP-table at [mem 0x000fdb60-0x000fdb6f] mapped at [c00fdb60]
initial memory mapped: [mem 0x00000000-0x013fffff]
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: [mem 0x00000000-0x375fdfff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x373fffff] page 2M
[mem 0x37400000-0x375fdfff] page 4k
kernel direct mapping tables up to 0x375fdfff @ [mem 0x013f7000-0x013fffff]
RAMDISK: [mem 0x359f8000-0x36cf3fff]
ACPI: RSDP 000f0490 00024 (v02 DELL )
ACPI: XSDT de473080 00084 (v01 DELL WN09 01072009 AMI 00010013)
ACPI: FACP de47f860 0010C (v05 DELL WN09 01072009 AMI 00010013)
ACPI: DSDT de4731a0 0C6BD (v02 DELL WN09 00000000 INTL 20120711)
ACPI: FACS de88c080 00040
ACPI: APIC de47f970 00072 (v03 DELL WN09 01072009 AMI 00010013)
ACPI: FPDT de47f9e8 00044 (v01 DELL WN09 01072009 AMI 00010013)
ACPI: ASF! de47fa30 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: SLIC de47fad8 00176 (v01 DELL WN09 01072009 AMI 00010013)
ACPI: SSDT de47fc50 00539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT de480190 00AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
ACPI: MCFG de480c68 0003C (v01 DELL WN09 01072009 MSFT 00000097)
ACPI: HPET de480ca8 00038 (v01 DELL WN09 01072009 AMI. 00000005)
ACPI: SSDT de480ce0 0036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT de481050 03528 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: MSDM de484578 00055 (v03 DELL WN09 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
3706MB HIGHMEM available.
885MB LOWMEM available.
mapped low ram: 0 - 375fe000
low ram: 0 - 375fe000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x375fdfff]
HighMem [mem 0x375fe000-0x1effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0xcd5c9fff]
node 0: [mem 0xcd5d1000-0xcdf6bfff]
node 0: [mem 0xce2ed000-0xde176fff]
node 0: [mem 0xde201000-0xde366fff]
node 0: [mem 0xdefff000-0xdeffffff]
node 0: [mem 0x00000000-0x1effffff]
On node 0 totalpages: 1036003
free_area_init_node: node 0, pgdat c0c45a00, node_mem_map f3618200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3949 pages, LIFO batch:0
Normal zone: 1740 pages used for memmap
Normal zone: 220978 pages, LIFO batch:31
HighMem zone: 7413 pages used for memmap
HighMem zone: 801891 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f75b3000 s34944 r0 d22400 u57344
pcpu-alloc: s34944 r0 d22400 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1026818
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
xsave: enabled xstate_bv 0x7, cntxt size 0x340
allocated 9404288 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000375fe:0011f000)
Memory: 4067256k/4702208k available (5761k kernel code, 76756k reserved, 2789k data, 672k init, 3237216k highmem)
virtual kernel memory layout:
fixmap : 0xffa95000 - 0xfffff000 (5544 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc0c5a000 - 0xc0d02000 ( 672 kB)
.data : 0xc09a0699 - 0xc0c59c40 (2789 kB)
.text : 0xc0400000 - 0xc09a0699 (5761 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f7008000 soft=f700a000
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3491.780 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6983.56 BogoMIPS (lpj=3491780)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 23794 entries in 47 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: Intel(R) Core(TM) i3-4150 CPU @ 3.50GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
CPU 1 irqstacks, hard=f70f2000 soft=f70f4000
Initializing CPU#1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1
CPU 2 irqstacks, hard=f717e000 soft=f7180000
Initializing CPU#2
#2
CPU 3 irqstacks, hard=f71a4000 soft=f71a6000
#3 OK
Initializing CPU#3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (27934.24 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xcd5ca000-0xcd5d0fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xde367000-0xde88dfff] (5402624 bytes)
atomic64 test passed for i586+ platform with CX8 and with SSE
RTC time: 0:30:02, date: 12/22/14
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT de1f6c18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: SSDT de1f6618 005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: SSDT de1f5d98 00119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 10: [mem 0xf7200000-0xf720ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf721a000-0xf721a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf7218000-0xf72183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf7210000-0xf7213fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf7217000-0xf72173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xf7216000-0xf72167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf7215000-0xf72150ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:104c] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 18: [mem 0xf7100000-0xf7100fff 64bit]
pci 0000:03:00.0: reg 20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:04:00.0: [1283:8893] type 01 class 0x060401
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 04-05]
pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcd5ca000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcdf6c000-0xcfffffff]
e820: reserve RAM buffer [mem 0xde177000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde367000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x1c00-0x1cfe] has been reserved
system 00:05: [io 0x1d00-0x1dfe] has been reserved
system 00:05: [io 0x1e00-0x1efe] has been reserved
system 00:05: [io 0x1f00-0x1ffe] has been reserved
system 00:05: [io 0x1800-0x18fe] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io 0x1854-0x1857] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:08: [io 0x0a00-0x0a1f] has been reserved
system 00:08: [io 0x0a20-0x0a2f] has been reserved
system 00:08: [io 0x0a30-0x0a3f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0xf7fdf000-0xf7fdffff] has been reserved
system 00:0a: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xe0000000-0xe01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xe0200000-0xe03fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xe01fffff]
pci 0000:00:1c.0: bridge window [mem 0xe0200000-0xe03fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:00:1c.5: PCI bridge to [bus 04-05]
pci 0000:04:00.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe01fffff]
pci_bus 0000:02: resource 2 [mem 0xe0200000-0xe03fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]
pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 19440k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1419208201.374:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1659
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 8c10 ss_vid 1028 ss_did 61c
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vesafb: mode is 1600x900x32, linelength=6400, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf1000000, mapped to 0xf7e80000, using 5632k, total 5632k
Console: switching to colour frame buffer device 200x56
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 60
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: Requesting acpi_cpufreq
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x11 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216100 irq 44
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216300 irq 44
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7218000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.13-100.SD12.i686.PAE ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7217000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.13-100.SD12.i686.PAE ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.13-100.SD12.i686.PAE xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 10 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.13-100.SD12.i686.PAE xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 10:165:507
rtc_cmos 00:06: setting system clock to 2014-12-22 00:30:02 UTC (1419208202)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: ST500DM002-1BD142, KC48, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC48 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: ATAPI: TSSTcorp DVD+/-RW SH-216DB, D100, max UDMA/100
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM TSSTcorp DVD+-RW SH-216DB D100 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 672k freed
Write protecting the kernel text: 5764k
Write protecting the kernel read-only data: 2252k
NX-protecting the kernel data: 4476k
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
dracut: dracut-018-35.git20120510.SD12
dracut: rd.luks=0: removing cryptoluks activation
usb 2-1: new high-speed USB device number 2 using ehci-pci
udevd[137]: starting version 182
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
checking generic (f1000000 580000) vs hw (e8000000 8000000)
checking generic (f1000000 580000) vs hw (f0000000 2000000)
fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0d90c0a1
nouveau [ DEVICE][0000:01:00.0] Chipset: GF119 (NVD9)
nouveau [ DEVICE][0000:01:00.0] Family : NVD0
nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 75.19.8b.00.02
nouveau [ PFB][0000:01:00.0] RAM type: DDR3
nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[TTM] Zone kernel: Available graphics memory: 425088 kiB
[TTM] Zone highmem: Available graphics memory: 2043696 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 1024 MiB
nouveau [ DRM] GART: 512 MiB
nouveau [ DRM] BIT BIOS found
nouveau [ DRM] Bios version 75.19.8b.00
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000300 00000000
nouveau [ DRM] DCB outp 01: 01000302 00020030
nouveau [ DRM] DCB outp 02: 02011362 00020010
nouveau [ DRM] DCB outp 03: 04022310 00000000
nouveau [ DRM] DCB conn 00: 00001030
nouveau [ DRM] DCB conn 01: 00002161
nouveau [ DRM] DCB conn 02: 00000200
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] 2 available performance level(s)
nouveau [ DRM] 1: core 270MHz shader 540MHz memory 405MHz voltage 900mV
nouveau [ DRM] 3: core 873MHz shader 1747MHz memory 825MHz voltage 1110mV
nouveau [ DRM] c: core 270MHz shader 540MHz memory 405MHz voltage 900mV fanspeed 1%
nouveau [ DRM] MM: using COPY0 for buffer copies
nouveau [ DRM] allocated 1600x900 fb: 0x60000, bo f2592a00
fbcon: nouveaufb (fb0) is primary device
usb 3-5: new low-speed USB device number 2 using xhci_hcd
usb 3-5: New USB device found, idVendor=04ca, idProduct=0061
usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-5: Product: USB Optical Mouse
usb 3-5: Manufacturer: PixArt
usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/input/input2
hid-generic 0003:04CA:0061.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-5/input0
Console: switching to colour frame buffer device 200x56
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0
dracut: Starting plymouth daemon
tsc: Refined TSC clocksource calibration: 3491.915 MHz
Switching to clocksource tsc
usb 3-6: new low-speed USB device number 3 using xhci_hcd
usb 3-6: New USB device found, idVendor=413c, idProduct=2107
usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-6: Product: Dell USB Entry Keyboard
usb 3-6: Manufacturer: Dell
usb 3-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/input/input3
hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:14.0-6/input0
usb 3-9: new high-speed USB device number 4 using xhci_hcd
usb 3-9: New USB device found, idVendor=0bda, idProduct=0184
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9: Product: USB2.0-CRW
usb 3-9: Manufacturer: Generic
usb 3-9: SerialNumber: 20100818841300000
Initializing USB Mass Storage driver...
scsi5 : usb-storage 3-9:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
dracut: rd.dm=0: removing DM RAID activation
dracut: rd.md=0: removing MD RAID activation
scsi 5:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
scsi 5:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
scsi 5:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
scsi 5:0:0:3: Direct-Access Generic- M.S./M.S.Pro/HG 1.00 PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:1: Attached scsi generic sg3 type 0
sd 5:0:0:2: Attached scsi generic sg4 type 0
sd 5:0:0:3: Attached scsi generic sg5 type 0
sd 5:0:0:0: [sdb] Attached SCSI removable disk
sd 5:0:0:1: [sdc] Attached SCSI removable disk
sd 5:0:0:2: [sdd] Attached SCSI removable disk
sd 5:0:0:3: [sde] Attached SCSI removable disk
EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/sda11
dracut: Switching root
type=1404 audit(1419208206.830:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 99005 rules.
SELinux: 2048 avtab hash slots, 99005 rules.
SELinux: 9 users, 15 roles, 4112 types, 222 bools, 1 sens, 1024 cats
SELinux: 83 classes, 99005 rules
SELinux: Permission ptrace_child in class process not defined in policy.
SELinux: Permission wake_alarm in class capability2 not defined in policy.
SELinux: Permission block_suspend in class capability2 not defined in policy.
SELinux: Permission attach_queue in class tun_socket not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev sda11, type ext4), uses xattr
type=1403 audit(1419208207.034:3): policy loaded auid=4294967295 ses=4294967295
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
udevd[324]: starting version 182
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
EXT4-fs (sda11): re-mounted. Opts: (null)
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x17
ACPI Warning: 0x0000f000-0x0000f01f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00001828-0x0000182f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00001c30-0x00001c3f SystemIO conflicts with Region \GPRL 1 (20121018/utaddress-251)
ACPI Warning: 0x00001c30-0x00001c3f SystemIO conflicts with Region \GPR_ 2 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00001c00-0x00001c2f SystemIO conflicts with Region \GPRL 1 (20121018/utaddress-251)
ACPI Warning: 0x00001c00-0x00001c2f SystemIO conflicts with Region \GPR_ 2 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 46 for MSI/MSI-X
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: irq 47 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xf7e9a000, f8:bc:12:9f:be:6b, XID 0c000800 IRQ 47
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x17
microcode: Microcode Update Driver: v2.00 , Peter Oruba
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
ALSA sound/pci/hda/patch_realtek.c:1241 SKU: Nid=0x1d sku_cfg=0x40400001
ALSA sound/pci/hda/patch_realtek.c:1243 SKU: port_connectivity=0x1
ALSA sound/pci/hda/patch_realtek.c:1244 SKU: enable_pcbeep=0x0
ALSA sound/pci/hda/patch_realtek.c:1245 SKU: check_sum=0x00000000
ALSA sound/pci/hda/patch_realtek.c:1246 SKU: customization=0x00000000
ALSA sound/pci/hda/patch_realtek.c:1247 SKU: external_amp=0x0
ALSA sound/pci/hda/patch_realtek.c:1248 SKU: platform_type=0x0
ALSA sound/pci/hda/patch_realtek.c:1249 SKU: swap=0x0
ALSA sound/pci/hda/patch_realtek.c:1250 SKU: override=0x1
ALSA sound/pci/hda/hda_auto_parser.c:306 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
ALSA sound/pci/hda/hda_auto_parser.c:310 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_auto_parser.c:314 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_auto_parser.c:315 mono: mono_out=0x0
ALSA sound/pci/hda/hda_auto_parser.c:319 inputs:
ALSA sound/pci/hda/hda_auto_parser.c:323 Rear Mic=0x19
ALSA sound/pci/hda/hda_auto_parser.c:323 Front Mic=0x18
ALSA sound/pci/hda/hda_auto_parser.c:323 Line=0x1a
ALSA sound/pci/hda/patch_realtek.c:1304 realtek: No valid SSID, checking pincfg 0x40400001 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1320 realtek: Enabling init ASM_ID=0x0001 CODEC_ID=10ec0662
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
hda_intel: Disabling MSI
ALSA sound/pci/hda/hda_intel.c:2848 0000:01:00.1: Handle VGA-switcheroo audio client
ALSA sound/pci/hda/hda_intel.c:1677 0000:01:00.1: Enable delay in RIRB handling
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
Adding 4142076k swap on /dev/sda5. Priority:0 extents:1 across:4142076k
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
r8169 0000:03:00.0 p3p1: unable to load firmware patch rtl_nic/rtl8168g-1.fw (-2)
r8169 0000:03:00.0 p3p1: link down
r8169 0000:03:00.0 p3p1: link down
IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
r8169 0000:03:00.0 p3p1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): p3p1: link becomes ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
fuse init (API version 7.20)
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts